Summary:
1. As part of IOTracing project, Add a class IOTracer,
IOTraceReader and IOTracerWriter that writes the file operations
information in a binary file. IOTrace Record contains record information
and right now it contains access_timestamp, file_operation, file_name,
io_status, len, offset and later other options will be added when file
system APIs will be call IOTracer.
2. Add few unit test cases that verify that reading and writing to a IO
Trace file is working properly and before start trace and after ending
trace nothing is added to the binary file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6958
Test Plan:
1. make check -j64
2. New testcases for IOTracer.
Reviewed By: anand1976
Differential Revision: D21943375
Pulled By: akankshamahajan15
fbshipit-source-id: 3532204e2a3eab0104bf411ab142e3fdd4fbce54
Summary:
The bug fixed in https://github.com/facebook/rocksdb/pull/1816/ is now applicable to iterator too. This was not an issue but https://github.com/facebook/rocksdb/pull/2886 caused the regression. If a put and DB flush happens just between iterator to get latest sequence number and getting super version, empty result for the key or an older value can be returned, which is wrong.
Fix it in the same way as the fix in https://github.com/facebook/rocksdb/issues/1816, that is to get the sequence number after referencing the super version.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6973
Test Plan: Will run stress tests for a while to make sure there is no general regression.
Reviewed By: ajkr
Differential Revision: D22029348
fbshipit-source-id: 94390f93630906796d6e2fec321f44a920953fd1
Summary:
https://github.com/facebook/rocksdb/issues/5411 refactored `VersionSet::Recover` but introduced a bug, explained as follows.
Before, once a checksum mismatch happens, `reporter` will set `s` to be non-ok. Therefore, Recover will stop processing the MANIFEST any further.
```
// Correct
// Inside Recover
LogReporter reporter;
reporter.status = &s;
log::Reader reader(..., reporter);
while (reader.ReadRecord() && s.ok()) {
...
}
```
The bug is that, the local variable `s` in `ReadAndRecover` won't be updated by `reporter` while reading the MANIFEST. It is possible that the reader sees a checksum mismatch in a record, but `ReadRecord` retries internally read and finds the next valid record. The mismatched record will be ignored and no error is reported.
```
// Incorrect
// Inside Recover
LogReporter reporter;
reporter.status = &s;
log::Reader reader(..., reporter);
s = ReadAndRecover(reader, ...);
// Inside ReadAndRecover
Status s; // Shadows the s in Recover.
while (reader.ReadRecord() && s.ok()) {
...
}
```
`LogReporter` can use a separate `log_read_status` to track the errors while reading the MANIFEST. RocksDB can process more MANIFEST entries only if `log_read_status.ok()`.
Test plan (devserver):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6996
Reviewed By: ajkr
Differential Revision: D22105746
Pulled By: riversand963
fbshipit-source-id: b22f717a423457a41ca152a242abbb64cf91fc38
Summary:
Added a `CompactionFilter` that is aware of the stress test's expected state. It only drops key versions that are already covered according to the expected state. It is incompatible with snapshots (same as all `CompactionFilter`s), so disables all snapshot-related features when used in the crash test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6988
Test Plan:
running a minified blackbox crash test
```
$ TEST_TMPDIR=/dev/shm python tools/db_crashtest.py blackbox --max_key=1000000 -write_buffer_size=1048576 -max_bytes_for_level_base=4194304 -target_file_size_base=1048576 -value_size_mult=33 --interval=10 --duration=3600
```
Reviewed By: anand1976
Differential Revision: D22072888
Pulled By: ajkr
fbshipit-source-id: 727b9d7a90d5eab18be0ec6cd5a810712ac13320
Summary:
Compressed block cache is disabled in https://github.com/facebook/rocksdb/pull/4650 for no good reason. Re-enable it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6990
Test Plan: Add a unit test to make sure a general function works with read-only DB + compressed block cache.
Reviewed By: ltamasi
Differential Revision: D22072755
fbshipit-source-id: 2a55df6363de23a78979cf6c747526359e5dc7a1
Summary:
`db_id` and `db_session_id` are now part of the table properties for all formats and stored in SST files. This adds about 99 bytes to each new SST file.
The `TablePropertiesNames` for these two identifiers are `rocksdb.creating.db.identity` and `rocksdb.creating.session.identity`.
In addition, SST files generated from SstFileWriter and Repairer have DB identity “SST Writer” and “DB Repairer”, respectively. Their DB session IDs are generated in the same way as `DB::GetDbSessionId`.
A table property test is added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6983
Test Plan: make check and some manual tests.
Reviewed By: zhichao-cao
Differential Revision: D22048826
Pulled By: gg814
fbshipit-source-id: afdf8c11424a6f509b5c0b06dafad584a80103c9
Summary:
The 6.11.fb branch is already cut so I will also backport this PR to
that branch.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6994
Reviewed By: riversand963
Differential Revision: D22084532
Pulled By: ajkr
fbshipit-source-id: 0b025f738cc31c65c673cbf89302359e88a34d19
Summary:
In best-efforts recovery, an error that is not Corruption or IOError::kNotFound or IOError::kPathNotFound will be overwritten silently. Fix this by checking all non-ok cases and return early.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6989
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D22071418
Pulled By: riversand963
fbshipit-source-id: 5a4ea5dfb1a41f41c7a3fdaf62b163007b42f04b
Summary:
Best-efforts recovery does not check the content of CURRENT file to determine which MANIFEST to recover from. However, it still checks the presence of CURRENT file to determine whether to create a new DB during `open()`. Therefore, we can tweak the logic in `open()` a little bit so that best-efforts recovery does not rely on CURRENT file at all.
Test plan (dev server):
make check
./db_basic_test --gtest_filter=DBBasicTest.RecoverWithNoCurrentFile
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6970
Reviewed By: anand1976
Differential Revision: D22013990
Pulled By: riversand963
fbshipit-source-id: db552a1868c60ed70e1f7cd252a3a076eb8ea58f
Summary:
When using parameterized tests, `gtest` sometimes prints the test
parameters. If no other printing method is available, it essentially
produces a hex dump of the object. This can cause issues with valgrind
with types like `TestArgs` in `table_test`, where the object layout has
gaps (with uninitialized contents) due to the members' alignment
requirements. The patch fixes the uninitialized reads by providing an
`operator<<` for `TestArgs` and also makes sure all members are
initialized (in a consistent order) on all code paths.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6980
Test Plan: `valgrind --leak-check=full ./table_test`
Reviewed By: siying
Differential Revision: D22045536
Pulled By: ltamasi
fbshipit-source-id: 6f5920ac28c712d0aa88162fffb80172ed769c32
Summary:
Added DB::GetDbSessionId by using the same format and machinery as DB::GetDbIdentity.
The DB Session ID is generated (and therefore, updated) each time a DB object is opened. It is written to the LOG file right after the line of “DB SUMMARY”.
A test for the uniqueness, for different openings and during the same opening, is also added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6959
Test Plan: Passed make check
Reviewed By: zhichao-cao
Differential Revision: D21951721
Pulled By: gg814
fbshipit-source-id: 958a48a612db49a39998ea703cded45987d3fa8b
Summary:
Persistent cache feature caused rocks db crash on windows. I posted a issue for it, https://github.com/facebook/rocksdb/issues/6919. I found this is because no "persistent_cache_key_prefix" is generated for persistent cache. Looking repo history, "GetUniqueIdFromFile" is not implemented on Windows. So my fix is adding "NewId()" function in "persistent_cache" and using it to generate prefix for persistent cache. In this PR, i also re-enable related test cases defined in "db_test2" and "persistent_cache_test" for windows.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6932
Test Plan:
1. run related test cases in "db_test2" and "persistent_cache_test" on windows and see it passed.
2. manually run db_bench.exe with "read_cache_path" and verified.
Reviewed By: riversand963
Differential Revision: D21911608
Pulled By: cheng-chang
fbshipit-source-id: cdfd938d54a385edbb2836b13aaa1d39b0a6f1c2
Summary:
`Env::LowerThreadPoolCPUPriority` takes a new parameter `CpuPriority` to be able to lower to a specific priority such as `CpuPriority::kIdle`, previously, the priority is always lowered to `CpuPriority::kLow`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6969
Test Plan: unit test `EnvPosixTest::LowerThreadPoolCpuPriority` added to `env_test.cc`.
Reviewed By: siying
Differential Revision: D22011169
Pulled By: cheng-chang
fbshipit-source-id: 568878c24a924912e35cef00c552d4a63431cdf4
Summary:
Add crash test for the case of best-efforts recovery.
After a certain amount of time, we kill the db_stress process, randomly delete some certain table files and restart db_stress. Given the randomness of file deletion, it is difficult to verify against a reference for data correctness. Therefore, we just check that the db can restart successfully.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6819
Test Plan:
```
./db_stress -best_efforts_recovery=true -disable_wal=1 -reopen=0
./db_stress -best_efforts_recovery=true -disable_wal=0 -skip_verifydb=1 -verify_db_one_in=0 -continuous_verification_interval=0
make crash_test_with_best_efforts_recovery
```
Reviewed By: anand1976
Differential Revision: D21436753
Pulled By: riversand963
fbshipit-source-id: 0b3605c922a16c37ed17d5ab6682ca4240e47926
Summary:
`HarnessTest` in `table_test.cc` currently tests many parameter
combinations sequentially in a loop. This is problematic from
a testing perspective, since if the test fails, we have no way of
knowing how many/which combinations have failed. It can also cause timeouts on
our test system due to the sheer number of combinations tested.
(Specifically, the parallel compression threads parameter added by
https://github.com/facebook/rocksdb/pull/6262 seems to have been the last straw.)
There is some DIY code there that splits the load among eight test cases
but that does not appear to be sufficient anymore.
Instead, the patch turns `HarnessTest` into a parameterized test, so all the
parameter combinations can be tested separately and potentially
concurrently. It also cleans up the tests a little, fixes
`RandomizedLongDB`, which did not get updated when the parallel
compression threads parameter was added, and turns `FooterTests` into a
standalone test case (since it does not actually need a fixture class).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6974
Test Plan: `make check`
Reviewed By: siying
Differential Revision: D22029572
Pulled By: ltamasi
fbshipit-source-id: 51baea670771c33928f2eb3902bd69dcf540aa41
Summary:
With Appveyor we run the same set of tests for older versions of VS as the latest version. It creates extra hanging which we don't plan to investigate. Instead, minimize tests run there. The full tests on Windows are already covered in CircleCI.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6966
Test Plan: Watch appveyor runs.
Reviewed By: pdillinger
Differential Revision: D22025383
fbshipit-source-id: 079dff9e8213bc750a47f4add90fdbf18de9d737
Summary:
The CircleCI's Clang flavor has a bug that doesn't really use CLANG. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6965
Test Plan: See CI results.
Reviewed By: pdillinger
Differential Revision: D22025355
fbshipit-source-id: e86922b9152e9f5732e5099d0ce41da9226ff806
Summary:
The `FileMetaData` objects associated with table files already contain the
number of the oldest blob file referenced by the SST in question. This patch
adds the inverse mapping to `BlobFileMetaData`, namely the set of table file
numbers for which the oldest blob file link points to the given blob file (these
are referred to as *linked SSTs*). This mapping will be used by the GC logic.
Implementation-wise, the patch builds on the `BlobFileMetaDataDelta`
functionality introduced in https://github.com/facebook/rocksdb/pull/6835: newly linked/unlinked SSTs are
accumulated in `BlobFileMetaDataDelta`, and the changes to the linked SST set
are applied in one shot when the new `Version` is saved. The patch also reworks
the blob file related consistency checks in `VersionBuilder` so they validate the
consistency of the forward table file -> blob file links and the backward blob file ->
table file links for blob files that are part of the `Version`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6945
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D21912228
Pulled By: ltamasi
fbshipit-source-id: c5bc7acf6e729a8fccbb12672dd5cd00f6f000f8
Summary:
If `options.wal_recovery_mode == WALRecoveryMode::kPointInTimeRecovery`, RocksDB stops replaying WAL once hitting an error and discards the rest of the WAL. This can lead to data loss if the error occurs at an offset smaller than the last sync'ed offset.
Ideally, RocksDB point-in-time recovery should permit recovery if the error occurs after last synced offset while fail recovery if error occurs before the last synced offset. However, RocksDB does not track the synced offset of WALs. Consequently, RocksDB does not know whether an error occurs before or after the last synced offset. An error can be one of the following.
- WAL record checksum mismatch. This can result from both corruption of synced data and dropping of unsynced data during shutdown. We cannot be sure which one. In order not to defeat the original motivation to permit the latter case, we keep the original behavior of point-in-time WAL recovery.
- IOError. This means the WAL can be bad, an indicator of whole file becoming unavailable, not to mention synced part of the WAL. Therefore, we choose to modify the behavior of point-in-time recovery and fail the database recovery.
Test plan (devserver):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6963
Reviewed By: ajkr
Differential Revision: D22011083
Pulled By: riversand963
fbshipit-source-id: f9cbf29a37dc5cc40d3fa62f89eed1ad67ca1536
Summary:
https://github.com/facebook/rocksdb/pull/6901 subtly changed the handling of the corner case
when a table file is deleted from a level, then re-added to the same level. (Note: this
should be extremely rare; one scenario that comes to mind is a trivial move followed by
a call to `ReFitLevel` that moves the file back to the original level.) Before that change,
a new `FileMetaData` object was created as a result of this sequence; after the change,
the original `FileMetaData` was essentially resurrected (since the deletion and the addition
simply cancel each other out with the change). This patch restores the original behavior,
which is more intuitive considering the interface, and in sync with how trivial moves are handled.
(Also note that `FileMetaData` contains some mutable data members, the values of which
might be different in the resurrected object and the freshly created one.)
The PR also fixes a bug in this area: with the original pre-6901 code, `VersionBuilder`
would add the same file twice to the same level in the scenario described above.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6939
Test Plan: `make check`
Reviewed By: ajkr
Differential Revision: D21905580
Pulled By: ltamasi
fbshipit-source-id: da07ae45384ecf3c6c53506d106432d88a7ec9df
Summary:
`DBTest2.CompressionFailures` currently tests many configurations
sequentially using nested loops, which often leads to timeouts
in our test system. The patch turns it into a parameterized test
instead.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6968
Test Plan: `make check`
Reviewed By: siying
Differential Revision: D22006954
Pulled By: ltamasi
fbshipit-source-id: f71f2f7108086b7651ecfce3d79a7fab24620b2c
Summary:
Application can ingest SST files with file checksum information, such that during ingestion, DB is able to check data integrity and identify of the SST file. The PR introduces generate_and_verify_file_checksum to IngestExternalFileOption to control if the ingested checksum information should be verified with the generated checksum.
1. If generate_and_verify_file_checksum options is *FALSE*: *1)* if DB does not enable SST file checksum, the checksum information ingested will be ignored; *2)* if DB enables the SST file checksum and the checksum function name matches the checksum function name in DB, we trust the ingested checksum, store it in Manifest. If the checksum function name does not match, we treat that as an error and fail the IngestExternalFile() call.
2. If generate_and_verify_file_checksum options is *TRUE*: *1)* if DB does not enable SST file checksum, the checksum information ingested will be ignored; *2)* if DB enable the SST file checksum, we will use the checksum generator from DB to calculate the checksum for each ingested SST files after they are copied or moved. Then, compare the checksum results with the ingested checksum information: _A)_ if the checksum function name does not match, _verification always report true_ and we store the DB generated checksum information in Manifest. _B)_ if the checksum function name mach, and checksum match, ingestion continues and stores the checksum information in the Manifest. Otherwise, terminate file ingestion and report file corruption.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6891
Test Plan: added unit test, pass make asan_check
Reviewed By: pdillinger
Differential Revision: D21935988
Pulled By: zhichao-cao
fbshipit-source-id: 7b55f486632db467e76d72602218d0658aa7f6ed
Summary:
This is required so that the test cases can safely be run in parallel.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6962
Test Plan: `make check`
Reviewed By: zhichao-cao
Differential Revision: D21980060
Pulled By: ltamasi
fbshipit-source-id: 616b7a0b686155d3874848b9098c67ad3f47efcc
Summary:
This saves up to two key comparisons in block seeks. The first key
comparison saved is a redundant key comparison against the restart key
where the linear scan starts. This comparison is saved in all cases
except when the found key is in the first restart interval. The
second key comparison saved is a redundant key comparison against the
restart key where the linear scan ends. This is only saved in cases
where all keys in the restart interval are less than the target
(probability roughly `1/restart_interval`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6646
Test Plan:
ran a benchmark with mostly default settings and counted key comparisons
before: `user_key_comparison_count = 19399529`
after: `user_key_comparison_count = 18431498`
setup command:
```
$ TEST_TMPDIR=/dev/shm/dbbench ./db_bench -benchmarks=fillrandom,compact -write_buffer_size=1048576 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -max_background_jobs=12 -level_compaction_dynamic_level_bytes=true -num=10000000
```
benchmark command:
```
$ TEST_TMPDIR=/dev/shm/dbbench/ ./db_bench -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=10000000 -compression_type=none -reads=1000000 -perf_level=3
```
Reviewed By: pdillinger
Differential Revision: D20849707
Pulled By: ajkr
fbshipit-source-id: 1f01c5cd99ea771fd27974046e37b194f1cdcfac
Summary:
Memory pinned by `pin_l0_filter_and_index_blocks_in_cache` needs to be predictable based on user config. This PR makes sure
we do not pin extra memory for large files generated by intra-L0 (see https://github.com/facebook/rocksdb/issues/6889).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6911
Test Plan: unit test
Reviewed By: siying
Differential Revision: D21835818
Pulled By: ajkr
fbshipit-source-id: a11a088549d06bed8aacc2548d266e5983f0ead4
Summary:
Moving towards the long term goal of moving most CI build to CircleCI when possible, add some Linux tests in CircleCI. This is not all what we can include to CircleCI. For example, Java builds are not includ
ed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6937
Test Plan: Watch CI build results.
Reviewed By: pdillinger
Differential Revision: D21941605
fbshipit-source-id: db6aead3c45f523386d4fb30d224cfde573cccad
Summary:
When MultiGet is called with duplicate keys, and the key matches the
largest key in an SST file and the value type is merge, only the first
instance of the duplicate key is returned with correct results. This is
due to the incorrect assumption that if a key in a batch is equal to the
largest key in the file, the next key cannot be present in that file.
Tests:
Add a new unit test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6953
Reviewed By: cheng-chang
Differential Revision: D21935898
Pulled By: anand1976
fbshipit-source-id: a2cc327a15150e23fd997546ca64d1c33021cb4c
Summary:
The patch adds a convenience method `GetFileMetaDataByNumber` that
builds on the `FileLocation` functionality introduced recently (see
https://github.com/facebook/rocksdb/pull/6862). This method makes it possible to
retrieve the `FileMetaData` directly as opposed to having to go through
`LevelFiles` and friends.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6940
Test Plan: `make check`
Reviewed By: cheng-chang
Differential Revision: D21905946
Pulled By: ltamasi
fbshipit-source-id: af99e19de21242b2b4a87594a535c6028d16ee72
Summary:
Implemented a subcommand of sst_dump called identify, which determines whether a file is an SST file or identifies and lists all the SST files in a directory;
This update also fixes the problem that sst_dump exits with a success state even if target file/directory does not exist/is not an SST file/is empty/is corrupted.
One test is added to sst_dump_test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6943
Test Plan: Passed make check and a few manual tests
Reviewed By: pdillinger
Differential Revision: D21928985
Pulled By: gg814
fbshipit-source-id: 9a8b48e0cf1a0e96b13f42b690aba8ad981afad3
Summary:
Since gflags use the global variable to store the flags passed in. In the unit test, if we git one flag per unit test, the result is that all the flags are combined together in the following tests. Therefore, it has the dependency. In this PR, we pass the full arguments each time to ensure that the old arguments will be overwritten by the new one such that the dependency is removed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6941
Test Plan: make asan_check. run each unit test in trace_analyzer_test independently and in arbitrary orders.
Reviewed By: pdillinger
Differential Revision: D21909176
Pulled By: zhichao-cao
fbshipit-source-id: dca550a0a4a205c30faa620e258a020a3b5b4e13
Summary:
In db_options.c, we should avoid including header files in the `db` directory to avoid introducing unnecessary dependency. The reason why `version_edit.h` has been included in `db_options.cc` is because we need two constants, `kUnknownChecksum` and `kUnknownChecksumFuncName`. We can put these two constants as `constexpr` in the public header `file_checksum.h`.
Test plan (devserver):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6952
Reviewed By: zhichao-cao
Differential Revision: D21925341
Pulled By: riversand963
fbshipit-source-id: 2902f3b74c97f0cf16c58ad24c095c787c3a40e2
Summary:
RocksDB is an embedded library; we should not write to the application's
console. Note: in each case, the same information is returned in the form of a
`Status::Corruption` object.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6948
Test Plan: `make check`
Reviewed By: ajkr
Differential Revision: D21914965
Pulled By: ltamasi
fbshipit-source-id: ae4b66789aa6b659eb8cc2ed4a048187962c86cc
Summary:
We currently do not have any validation that would ensure that the `FileMetaData`
objects are equivalent when a file gets deleted from the LSM tree and then re-added
(think trivial moves); however, if we did, this test case would be in violation. The patch
changes the values used in the test case so they are consistent.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6942
Test Plan: `make check`
Reviewed By: zhichao-cao
Differential Revision: D21911366
Pulled By: ltamasi
fbshipit-source-id: 2f0486f8337373a6a111b6f28433d70507857104
Summary:
Make RocksDB run a predefined unit test so that it can be integrated with better tools.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6926
Test Plan: Watch tests
Reviewed By: pdillinger
Differential Revision: D21866216
fbshipit-source-id: cafca82efdf0b72671be8d30b665e88a75ae6000
Summary:
The ```for``` loop in ```VerifyChecksumInBlocks``` only checks ```index_iter->Valid()``` which could be ```false``` either due to reaching the end of the index or, in case of partitioned index, it could be due to a checksum mismatch error when reading a 2nd level index block. Instead of throwing away the index iterator status, we need to return any errors back to the caller.
Tests:
Add a test in block_based_table_reader_test.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6909
Reviewed By: pdillinger
Differential Revision: D21833922
Pulled By: anand1976
fbshipit-source-id: bc778ebf1121dbbdd768689de5183f07a9f0beae
Summary:
Currently, `DeleteDir` only deletes the directory if there are no other directories under the target dir. This PR makes it delete directories recursively.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6934
Test Plan:
Added a new unit test in testutil_test.cc.
`make testutil_test`
Reviewed By: zhichao-cao
Differential Revision: D21884211
Pulled By: cheng-chang
fbshipit-source-id: 0b9a48a200f494ee007aef5d1763b4aa331f8b5a
Summary:
Confusing checks for null that are never null
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6933
Test Plan: make check
Reviewed By: cheng-chang
Differential Revision: D21885466
Pulled By: pdillinger
fbshipit-source-id: 4b48e03c2a33727f2702b0d12292f9fda5a3c475
Summary:
Mostly uninitialized values: some probably written before use, but some seem like bugs. Also, destructor needs to be virtual, and possible use-after-free in test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6935
Test Plan: make check
Reviewed By: siying
Differential Revision: D21885484
Pulled By: pdillinger
fbshipit-source-id: e2e7cb0a0cf196f2b55edd16f0634e81f6cc8e08
Summary:
When operation on an open file descriptor fails, we should close the file descriptor.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6936
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D21885458
Pulled By: riversand963
fbshipit-source-id: ba077a76b256a8537f21e22e4ec198f45390bf50
