Summary:
BlobDB currently syncs each blob file periodically after writing a certain amount of
data (as specified by the configuration option `BlobDBOptions::bytes_per_sync`)
and all open blob files when the base DB's memtables are flushed. With the patch,
in addition to the above, blob files are also synced right before being closed, after
the footer has been written. This will be beneficial for the new integrated blob file
write path as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7160
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D22672646
Pulled By: ltamasi
fbshipit-source-id: 62b34263543a7e74abcbb7adf011daa1e699998f
Summary:
`DBTest::SnapshotFiles` runs the tests in a `while` loop.
Currently, the snapshot directory is not cleaned up in each loop, so previous snapshot files may remain in the next loop's snapshot.
When I'm working on https://github.com/facebook/rocksdb/pull/7129, when checking the tracked WALs in MANIFEST, I find that this test always fails because it reads some unknown WAL. It turns out that the unknown WAL is left from previous loops.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7156
Test Plan: make db_test && ./db_test --gtest_filters=*SnapshotFiles
Reviewed By: siying
Differential Revision: D22668360
Pulled By: cheng-chang
fbshipit-source-id: 69d4aa3506038ba30e218e8ae966357935a99c6c
Summary:
When paraoid_files_checks=true, a rolling key-value hash is generated and compared to what is written to the file. If the values do not match, the SST file is rejected.
Code put in place for the check for both flush and compaction jobs. Corresponding test added to corruption_test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7134
Reviewed By: cheng-chang
Differential Revision: D22646149
fbshipit-source-id: 8fde1984a1a11edd3bd82a413acffc5ea7aa683f
Summary:
Issue https://github.com/facebook/rocksdb/issues/7133 reported that using `system_clock` in `FileOperationInfo::TimePoint` causes the duration of file flush operation (which can be a noop on MacOS in some scenarios) appears to be 0 and fail an assertion in listener_test. Using `steady_clock` supposedly fixed the problem.
`steady_clock` actually fits better into the use cases of `FileOperationInfo::TimePoint` as all usages care about durations but not wall clock time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7153
Test Plan: make check.
Reviewed By: riversand963
Differential Revision: D22654136
Pulled By: roghnin
fbshipit-source-id: 5980b1080734bdae496a18071a2c2b5887c67d85
Summary:
TSAN reports warning in one column_family_test:
WARNING: ThreadSanitizer: data race (pid=16352)
Write of size 8 at 0x7ffcdf042158 by main thread:
#0 pthread_cond_destroy <null> (column_family_test+0x471f65)
https://github.com/facebook/rocksdb/issues/1 rocksdb::port::CondVar::~CondVar() /home/circleci/project/port/port_posix.cc:101:49 (column_family_test+0x8a627a)
https://github.com/facebook/rocksdb/issues/2 rocksdb::test::SleepingBackgroundTask::~SleepingBackgroundTask() /home/circleci/project/./test_util/testutil.h:397:7 (column_family_test+0x54b6e2)
https://github.com/facebook/rocksdb/issues/3 rocksdb::ColumnFamilyTest_FlushCloseWALFiles_Test::TestBody() /home/circleci/project/db/column_family_test.cc:3008:1 (column_family_test+0x54b6e2)
......
Previous read of size 8 at 0x7ffcdf042158 by thread T2 (mutexes: write M0):
#0 pthread_cond_broadcast <null> (column_family_test+0x471dd2)
https://github.com/facebook/rocksdb/issues/1 rocksdb::port::CondVar::SignalAll() /home/circleci/project/port/port_posix.cc:139:28 (column_family_test+0x8a651a)
https://github.com/facebook/rocksdb/issues/2 rocksdb::test::SleepingBackgroundTask::DoSleep() /home/circleci/project/./test_util/testutil.h:412:12 (column_family_test+0x58574b)
......
Likely, SleepingBackgroundTask::DoSleep() started to execute after the main thread has finished everything, cancelled and waited for sleeping tasks to finish. At this time, although DoSlee() will not sleep, but it also accesses the mutex, creating a data race with destructor of the test. Fix this bug by waiting for the sleeping task to start sleeping after it is scheduled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7150
Test Plan: Run these modified tests and make sure it doesn't break.
Reviewed By: riversand963
Differential Revision: D22630716
fbshipit-source-id: cc5781cf69083685de406490438898238bdfc2d3
Summary:
Remove the 3 testing cases that cause the time out in linux build by https://github.com/facebook/rocksdb/issues/6765 . Will fix them later.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7141
Test Plan: make asan_check, buck run
Reviewed By: ajkr
Differential Revision: D22593831
Pulled By: zhichao-cao
fbshipit-source-id: 14956c36476ecc3393f613178c22e13df843126e
Summary:
Previously when running `db_bench` with large value for `num_multi_dbs` and enabled `Options::dump_malloc_stats`, we would see most CPU spent in jemalloc locking. After this PR that no longer shows up at the top of the profile.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7145
Reviewed By: riversand963
Differential Revision: D22593031
Pulled By: ajkr
fbshipit-source-id: 3b3fc91f93249c6afee53f59f34c487c3fc5add6
Summary:
TSAN shows warning with clang with warning similar to this:
WARNING: ThreadSanitizer: data race (pid=10159)
Atomic write of size 8 at 0x7b5000002890 by thread T33:
#0 __tsan_atomic64_store <null> (db_test+0x4ca2b5)
https://github.com/facebook/rocksdb/issues/1 std::__atomic_base<unsigned long>::store(unsigned long, std::memory_order) /usr/bin/../lib/gcc/x86_64-linux-gnu/5.4.0/../../../../include/c++/5.4.0/bits/atomic_base.h:374:2 (db_test+0x774fde)
https://github.com/facebook/rocksdb/issues/2 rocksdb::VersionSet::SetLastSequence(unsigned long) /home/circleci/project/./db/version_set.h:1057:20 (db_test+0x774fde)
https://github.com/facebook/rocksdb/issues/3 rocksdb::DBImpl::WriteImpl(rocksdb::WriteOptions const&, rocksdb::WriteBatch*, rocksdb::WriteCallback*, unsigned long*, unsigned long, bool, unsigned long*, unsigned long, rocksdb::PreReleaseCallback*) /home/circleci/project/db/db_impl/db_impl_write.cc:449:18 (db_test+0x774fde)
......
Previous read of size 8 at 0x7b5000002890 by thread T5 (mutexes: write M1044689462619020832):
#0 rocksdb::DBImpl::ReleaseSnapshot(rocksdb::Snapshot const*) /home/circleci/project/db/db_impl/db_impl.cc (db_test+0x6f4ae7)
https://github.com/facebook/rocksdb/issues/1 rocksdb::(anonymous namespace)::MTThreadBody(void*) /home/circleci/project/db/db_test.cc:2514:13 (db_test+0x56ac59)
https://github.com/facebook/rocksdb/issues/2 rocksdb::(anonymous namespace)::StartThreadWrapper(void*) /home/circleci/project/env/env_posix.cc:443:3 (db_test+0x88c4cd)
It is not limited to ReleaseSnapshot() and rocksdb::DBImpl::MultiCFSnapshot().
While we are not 100% sure it doesn't indicate any correctness violation, we suppress them for now to keep TSAN clean with more tests so that we can cover more bugs with CI.
In the gcc runs we have been running, this warning rarely shows up.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7126
Test Plan: See the mini-TSAN test to pass with reasonable run time.
Reviewed By: ajkr
Differential Revision: D22552375
fbshipit-source-id: ebdd3854cb3becec3403970326a1ca961db2ab00
Summary:
In current codebase, in write path, if Retryable IO Error happens, SetBGError is called. The retryable IO Error is converted to hard error and DB is in read only mode. User or application needs to resume it. In this PR, if Retryable IO Error happens in one DB, SetBGError will create a new thread to call Resume (auto resume). otpions.max_bgerror_resume_count controls if auto resume is enabled or not (if max_bgerror_resume_count<=0, auto resume will not be enabled). options.bgerror_resume_retry_interval controls the time interval to call Resume again if the previous resume fails due to the Retryable IO Error. If non-retryable error happens during resume, auto resume will terminate.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6765
Test Plan: Added the unit test cases in error_handler_fs_test and pass make asan_check
Reviewed By: anand1976
Differential Revision: D21916789
Pulled By: zhichao-cao
fbshipit-source-id: acb8b5e5dc3167adfa9425a5b7fc104f6b95cb0b
Summary:
Currently, RocksDB lets compaction to go through even in case of
corrupted keys, the number of which is reported in CompactionJobStats.
However, RocksDB does not check this value. We should let compaction run
in a stricter mode.
Temporarily disable two tests that allow corrupted keys in compaction.
With this PR, the two tests will assert(false) and terminate. Still need
to investigate what is the recommended google-test way of doing it.
Death test (EXPECT_DEATH) in gtest has warnings now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7124
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D22530722
Pulled By: riversand963
fbshipit-source-id: 6a5a6a992028c6d4f92cb74693c92db462ae4ad6
Summary:
Periodic syncing of blob files is performed by `WritableFileWriter`;
`bytes_per_sync_` and `next_sync_offset_` in `BlobLogWriter` are
actually unused (or more precisely, only used by methods that are
themselves unused). The patch removes all this dead code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7125
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D22531021
Pulled By: ltamasi
fbshipit-source-id: 6b293ad5a79d3e6bf15c5c68f7aedd7ce7a15f10
Summary:
During memtable lookup, an unrecognized value type should be reported as
Status::Corruption.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7121
Test Plan: make check
Reviewed By: cheng-chang
Differential Revision: D22512124
Pulled By: riversand963
fbshipit-source-id: 9b97be7d9b230c5aae9205f96054420e5ea09066
Summary:
There currently exist multiple `GetChildren()` calls in `DBImpl::Recover()`, which can be expensive in cases of distributed file systems.
This pull request try to call `DBImpl::Recover()` of each necessary directory only _once_ and reuse the results in the places of repeated calls in current code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7044
Test Plan:
Run `make check` and use the default test suite. The modified code should be semantically identical to the current code. As a proof of this solution, we may optionally deploy the system onto a (real or simulated) distributed system and expect reduced latency caused by manifest fetching.
(WIP)
Reviewed By: riversand963
Differential Revision: D22419925
Pulled By: roghnin
fbshipit-source-id: d3774fbfbc246c5527101bc16747eb5c90919886
Summary:
Cleans up some of the dependencies on test code in the Makefile while building tools:
- Moves the test::RandomString, DBBaseTest::RandomString into Random
- Moves the test::RandomHumanReadableString into Random
- Moves the DestroyDir method into file_utils
- Moves the SetupSyncPointsToMockDirectIO into sync_point.
- Moves the FaultInjection Env and FS classes under env
These changes allow all of the tools to build without dependencies on test_util, thereby simplifying the build dependencies. By moving the FaultInjection code, the dependency in db_stress on different libraries for debug vs release was eliminated.
Tested both release and debug builds via Make and CMake for both static and shared libraries.
More work remains to clean up how the tools are built and remove some unnecessary dependencies. There is also more work that should be done to get the Makefile and CMake to align in their builds -- what is in the libraries and the sizes of the executables are different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7097
Reviewed By: riversand963
Differential Revision: D22463160
Pulled By: pdillinger
fbshipit-source-id: e19462b53324ab3f0b7c72459dbc73165cc382b2
Summary:
As title. The goal is to shorten the execution time of several tests
when they are combined together in a single TEST_F.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7105
Test Plan:
make db_wal_test
./db_wal_test
Reviewed By: ltamasi
Differential Revision: D22442705
Pulled By: riversand963
fbshipit-source-id: 0ad49b8f21fa86dcd5a4d3c9a06af313735ac217
Summary:
When format_version is high enough to support user-key and
there are index entries for same user key that spans multiple data
blocks then it changes from user-key mode to internal-key mode. But the
flush policy is not reset to point to Block Builder of internal-keys.
After this switch, no entries are added to user key index partition
result, thus it never triggers flushing the block.
Fix: 1. After adding the entry in sub_builder_index_, if there is a switch
from user-key to internal-key, then flush policy is updated to point to
Block Builder of internal-keys index partition.
2. Set sub_builder_index_->seperator_is_key_plus_seq_ = true if
seperator_is_key_plus_seq_ is set to true so that subsequent partitions
can also use internal key mode.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7096
Test Plan: make check -j64
Reviewed By: ajkr
Differential Revision: D22416598
Pulled By: akankshamahajan15
fbshipit-source-id: 01fc2dc07ea1b32f8fb803995ebe6e9a3fbe67ac
Summary:
Currently, `EventListener` in listner.h only have callback functions for file read and write. One may favor extended callback functions for more file I/O operations like flush, sync and close. This PR tries to add those interface and have them called when appropriate throughout the code base.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7055
Test Plan:
Write an experimental listener with those new callback functions with log output in them; run experiments and check logs to see those functions are actually called.
Default test suits `make check` should also be included.
Reviewed By: riversand963
Differential Revision: D22380624
Pulled By: roghnin
fbshipit-source-id: 4121491d45c2c2aae8c255e7998090559a241c6a
Summary:
When table file checksums are enabled and stored in the DB manifest by using the RocksDB default crc32c checksum function, BackupEngine will calculate the crc32c checksum of the file to be copied and compare the calculated result with the one stored in the DB manifest before copying the file to the backup directory.
After copying to the backup directory, BackupEngine will verify the checksum of the copied file with the one calculated before copying. This helps detect some rare corruption events such as bit-flips during the copying process.
No verification with checksums in DB manifest will be performed if the table file checksum function is not the RocksDB default crc32c checksum function.
In addition, If `share_table_files` and `share_files_with_checksum` are true, BackupEngine will compare the checksums computed before and after copying of the table files.
Corresponding tests are added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7015
Test Plan: Passed make check
Reviewed By: pdillinger
Differential Revision: D22165732
Pulled By: gg814
fbshipit-source-id: ee0e8cc397c455eba64545c29380b9d9853588ec
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7049
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D22301700
fbshipit-source-id: f9a9e3b3b26ce640665a47cb8bff33ba0c89b565
Summary:
When format_version is high enough to support user-key and there are index entries for same user key that spans multiple data blocks then it changes from user-key mode to internal-key mode. But the flush policy is not reset to point to Block Builder of internal-keys. After this switch, no entries are added to user key index partition result, thus it never triggers flushing the block.
Fix: After adding the entry in sub_builder_index_, if there is a switch from user-key to internal-key, then flush policy is updated to point to Block Builder of internal-keys index partition.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7022
Test Plan:
1. make check -j64
2. Added one unit test case
Reviewed By: ajkr
Differential Revision: D22197734
Pulled By: akankshamahajan15
fbshipit-source-id: d87e9e46bccab8e896ee6979d6b79c51f73d479e
Summary:
This check is flaky because compaction could run between the `Flush()` and the `TestGetTickerCount()`, which would increase the `BLOCK_CACHE_INDEX_MISS` count beyond what the test expects. Verified by adding a `sleep(1)` between those two lines and observing the counter is too high every time. The solution is just to remove this check as it doesn't have any use anyways. The latter check of index miss is sufficient to conclude the newest L0 file (i.e., the one generated by intra-L0) does not have its index block pinned in cache. It'd be nice to simultaneously check the L0 files generated by flush do have their index blocks pinned in cache, but that's not what the line deleted in this PR was checking..
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7065
Reviewed By: pdillinger
Differential Revision: D22340327
Pulled By: ajkr
fbshipit-source-id: e076b2c7228b7fa763dd0c0cb13828e176c1abee
Summary:
Random memtable layouts could cause random failure,
reproducible with command below running for a while. Test now using
deterministic behavior.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7064
Test Plan: while ./db_test --gtest_filter=*SizesMemTable*; do true; done
Reviewed By: siying
Differential Revision: D22339442
Pulled By: pdillinger
fbshipit-source-id: 8e74e5a9b5e88f7030854045a22c12cf561d5de6
Summary:
Change the linking of tests/tools to be against a library rather than a list of objects. This change substantially reduces the size of the objects produced.
peterd clean repo size: 264M
Before this change, with make all: 40G
After this change, with make all: 28G
With make LIB_MODE=shared all: 7.0G
The list of TESTS was changed from being hard-coded to generated from the test sources variable. Note that there are some test sources that are not built as tests (though the set of tests is identical to the previous version).
Added OBJ_DIR option to Makefile to allow objects to be placed in an alternative location. By default, OBJ_DIR is the same as before ("./").
This change is a precursor to being able to build/run the tests/tools linked against static libraries. Additionally, it should be possible to clean up and merge some of the rules for building tests and the like if so desired.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6660
Reviewed By: riversand963
Differential Revision: D22244463
Pulled By: pdillinger
fbshipit-source-id: db9c6341d81ed62c2270374f4ede02fb9604c754
Summary:
The earlier `VersionBuilder` code only cleaned up blob files that were
marked as entirely consisting of garbage using `VersionEdits` with
`BlobFileGarbage`. This covers the cases when table files go through
regular compaction, where we iterate through the KVs and thus have an
opportunity to calculate the amount of garbage (that is, most cases).
However, it does not help when table files are simply dropped (e.g. deletion
compactions or the `DeleteFile` API). To deal with such cases, the patch
adds logic that cleans up all blob files at the head of the list until the first
one with linked SSTs is found. (As an example, let's assume we have blob files
with numbers 1..10, and the first one with any linked SSTs is number 8.
This means that SSTs in the `Version` only rely on blob files with numbers >= 8,
and thus 1..7 are no longer needed.)
The code change itself is pretty small; however, changing the logic like this
necessitated changes to some tests that have been added recently (namely
to the ones that use blob files in isolation, i.e. without any table files referring
to them). Some of these cases were fixed by bypassing `VersionBuilder` altogether
in order to keep the tests simple (which actually makes them more proper unit tests
as well), while the `VersionBuilder` unit tests were fixed by adding dummy table
files to the test cases as needed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7001
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D22119474
Pulled By: ltamasi
fbshipit-source-id: c6547141355667d4291d9661d6518eb741e7b54a
Summary:
WriteCallbackTest.WriteWithCallbackTest has a deep for-loop and in some cases runs very long. Parameterimized it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7037
Test Plan: Run the test and see it passes.
Reviewed By: ltamasi
Differential Revision: D22269259
fbshipit-source-id: a1b6687b5bf4609754833d14cf383d68bc7ab27a
Summary:
Added compaction filter support for BlobDB non-TTL values. Same as vanilla RocksDB, user compaction filter applies to all k/v pairs of the compaction for non-TTL values. It honors `min_blob_size`, which potentially results value transitions between inlined data and stored-in-blob data when size of value is changed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6850
Reviewed By: siying
Differential Revision: D22263487
Pulled By: ltamasi
fbshipit-source-id: 8fc03f8cde2a5c831e63b436b3dbf1b7f90939e8
Summary:
Fsyncing files is not providing more test coverage in many tests. Provide an option in SpecialEnv to turn it off to speed it up and enable this option in some tests with relatively long run time.
Most of those tests can be divided as parameterized gtest too. This two speed up approaches are orthogonal and we can do both if needed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7036
Test Plan: Run all tests and make sure they pass.
Reviewed By: ltamasi
Differential Revision: D22268084
fbshipit-source-id: 6d4a838a1b7328c13931a2a5d93de57aa02afaab
Summary:
Current implementation of the ```read_options.deadline``` option only checks the deadline for random file reads during point lookups. This PR extends the checks to file opens, prefetches and preloads as part of table open.
The main changes are in the ```BlockBasedTable```, partitioned index and filter readers, and ```TableCache``` to take ReadOptions as an additional parameter. In ```BlockBasedTable::Open```, in order to retain existing behavior w.r.t checksum verification and block cache usage, we filter out most of the options in ```ReadOptions``` except ```deadline```. However, having the ```ReadOptions``` gives us more flexibility to honor other options like verify_checksums, fill_cache etc. in the future.
Additional changes in callsites due to function signature changes in ```NewTableReader()``` and ```FilePrefetchBuffer```.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6982
Test Plan: Add new unit tests in db_basic_test
Reviewed By: riversand963
Differential Revision: D22219515
Pulled By: anand1976
fbshipit-source-id: 8a3b92f4a889808013838603aa3ca35229cd501b
Summary:
After https://github.com/facebook/rocksdb/issues/6949 , VersionSet::io_status_ can be concurrently accessed by multiple
threads without lock, causing tsan test to fail. For example, a bg flush thread
resets io_status_ before calling LogAndApply(), while another thread already in
the process of LogAndApply() reads io_status_. This is a bug.
We do not have to reset io_status_ each time we call LogAndApply(). io_status_
is part of the state of VersionSet, and it indicates the outcome of preceding
MANIFEST/CURRENT files IO operations. Its value should be updated only when:
1. MANIFEST/CURRENT files IO fail for the first time.
2. MANIFEST/CURRENT files IO succeed as part of recovering from a prior
failure without process restart, e.g. calling Resume().
Test Plan (devserver):
COMPILE_WITH_TSAN=1 make check
COMPILE_WITH_TSAN=1 make db_test2
./db_test2 --gtest_filter=DBTest2.CompactionStall
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7034
Reviewed By: zhichao-cao
Differential Revision: D22247137
Pulled By: riversand963
fbshipit-source-id: 77b83e05390f3ee3cd2d96d3fdd6fe4f225e3216
Summary:
We are still keeping unity build working. So it's a good idea to add to a pre-commit CI.
A latest GCC docker image just to get a little bit more coverage. Fix three small issues to make it pass.
Also make unity_test to run db_basic_test rather than db_test to cut the test time. There is no point to run expensive tests here. It was set to run db_test before db_basic_test was separated out.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7026
Test Plan: watch tests to pass.
Reviewed By: zhichao-cao
Differential Revision: D22223197
fbshipit-source-id: baa3b6cbb623bf359829b63ce35715c75bcb0ed4
Summary:
Some tests directly uses TmpDir() as temporary directory without adding any randomize factor. This would cause failures when tests run in parallel. Fix it by moving some of them to test::PerThreadDBPath()
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7030
Test Plan: Watch existing tests pass
Reviewed By: zhichao-cao
Differential Revision: D22224710
fbshipit-source-id: 28c9932fede0a4a64670e5b5fdb08f4fb5dccdd0
Summary:
`BackupableDBOptions::new_naming_for_backup_files` is added. This option is false by default. When it is true, backup table filenames under directory shared_checksum are of the form `<file_number>_<crc32c>_<db_session_id>.sst`.
Note that when this option is true, it comes into effect only when both `share_files_with_checksum` and `share_table_files` are true.
Three new test cases are added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6997
Test Plan: Passed make check.
Reviewed By: ajkr
Differential Revision: D22098895
Pulled By: gg814
fbshipit-source-id: a1d9145e7fe562d71cde7ac995e17cb24fd42e76
Summary:
This PR provides preliminary support for handling IO error during MANIFEST write.
File write/sync is not guaranteed to be atomic. If we encounter an IOError while writing/syncing to the MANIFEST file, we cannot be sure about the state of the MANIFEST file. The version edits may or may not have reached the file. During cleanup, if we delete the newly-generated SST files referenced by the pending version edit(s), but the version edit(s) actually are persistent in the MANIFEST, then next recovery attempt will process the version edits(s) and then fail since the SST files have already been deleted.
One approach is to truncate the MANIFEST after write/sync error, so that it is safe to delete the SST files. However, file truncation may not be supported on certain file systems. Therefore, we take the following approach.
If an IOError is detected during MANIFEST write/sync, we disable file deletions for the faulty database. Depending on whether the IOError is retryable (set by underlying file system), either RocksDB or application can call `DB::Resume()`, or simply shutdown and restart. During `Resume()`, RocksDB will try to switch to a new MANIFEST and write all existing in-memory version storage in the new file. If this succeeds, then RocksDB may proceed. If all recovery is completed, then file deletions will be re-enabled.
Note that multiple threads can call `LogAndApply()` at the same time, though only one of them will be going through the process MANIFEST write, possibly batching the version edits of other threads. When the leading MANIFEST writer finishes, all of the MANIFEST writing threads in this batch will have the same IOError. They will all call `ErrorHandler::SetBGError()` in which file deletion will be disabled.
Possible future directions:
- Add an `ErrorContext` structure so that it is easier to pass more info to `ErrorHandler`. Currently, as in this example, a new `BackgroundErrorReason` has to be added.
Test plan (dev server):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6949
Reviewed By: anand1976
Differential Revision: D22026020
Pulled By: riversand963
fbshipit-source-id: f3c68a2ef45d9b505d0d625c7c5e0c88495b91c8
Summary:
It's useful to build RocksDB using a more recent clang version in CI. Add a CircleCI build and fix some issues with it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7025
Test Plan: See all tests pass.
Reviewed By: pdillinger
Differential Revision: D22215700
fbshipit-source-id: 914a729c2cd3f3ac4a627cc0ac58d4691dca2168
Summary:
The constant `kNoExpiration` is currently defined in an
internal/implementation header (`blob_log_format.h`); the patch moves it
to the public header `blob_db.h` so it is accessible to users.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7018
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D22191354
Pulled By: ltamasi
fbshipit-source-id: 98c8012a83b999a3f1a30e955ce6bb71ba29dc5c
Summary:
FlushAfterIntraL0CompactionCheckConsistencyFail is flakey. It sometimes fails with:
db/db_compaction_test.cc:5186: Failure
Expected equality of these values:
10
NumTableFilesAtLevel(0)
Which is: 3
I don't see a clear reason why the assertion would always be true. The necessarily of the assertion is not clear either. Remove it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7003
Test Plan: See the test still builds.
Reviewed By: riversand963
Differential Revision: D22129753
fbshipit-source-id: 42f0bb05e32b369e8d726bfd3e35c29cf52fe008
Summary:
Although RocksDB falls over in various other ways with KVs
around 4GB or more, this change fixes how XXH32 and XXH64 were being
called by the block checksum code to support >= 4GB in case that should
ever happen, or the code copied for other uses.
This change is not a schema compatibility issue because the checksum
verification code would checksum the first (block_size + 1) mod 2^32
bytes while the checksum construction code would checksum the first
block_size mod 2^32 plus the compression type byte, meaning the
XXH32/64 checksums for >=4GB block would not match about 255/256 times.
While touching this code, I refactored to consolidate redundant
implementations, improving diagnostics and performance tracking in some
cases. Also used less confusing language in those diagnostics.
Makes https://github.com/facebook/rocksdb/issues/6875 obsolete.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6978
Test Plan:
I was able to write a test for this using an SST file writer
and VerifyChecksum in a reader. The test fails before the fix, though
I'm leaving the test disabled because I don't think it's worth the
expense of running regularly.
Reviewed By: gg814
Differential Revision: D22143260
Pulled By: pdillinger
fbshipit-source-id: 982993d16134e8c50bea2269047f901c1783726e
Summary:
The bug fixed in https://github.com/facebook/rocksdb/pull/1816/ is now applicable to iterator too. This was not an issue but https://github.com/facebook/rocksdb/pull/2886 caused the regression. If a put and DB flush happens just between iterator to get latest sequence number and getting super version, empty result for the key or an older value can be returned, which is wrong.
Fix it in the same way as the fix in https://github.com/facebook/rocksdb/issues/1816, that is to get the sequence number after referencing the super version.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6973
Test Plan: Will run stress tests for a while to make sure there is no general regression.
Reviewed By: ajkr
Differential Revision: D22029348
fbshipit-source-id: 94390f93630906796d6e2fec321f44a920953fd1
Summary:
https://github.com/facebook/rocksdb/issues/5411 refactored `VersionSet::Recover` but introduced a bug, explained as follows.
Before, once a checksum mismatch happens, `reporter` will set `s` to be non-ok. Therefore, Recover will stop processing the MANIFEST any further.
```
// Correct
// Inside Recover
LogReporter reporter;
reporter.status = &s;
log::Reader reader(..., reporter);
while (reader.ReadRecord() && s.ok()) {
...
}
```
The bug is that, the local variable `s` in `ReadAndRecover` won't be updated by `reporter` while reading the MANIFEST. It is possible that the reader sees a checksum mismatch in a record, but `ReadRecord` retries internally read and finds the next valid record. The mismatched record will be ignored and no error is reported.
```
// Incorrect
// Inside Recover
LogReporter reporter;
reporter.status = &s;
log::Reader reader(..., reporter);
s = ReadAndRecover(reader, ...);
// Inside ReadAndRecover
Status s; // Shadows the s in Recover.
while (reader.ReadRecord() && s.ok()) {
...
}
```
`LogReporter` can use a separate `log_read_status` to track the errors while reading the MANIFEST. RocksDB can process more MANIFEST entries only if `log_read_status.ok()`.
Test plan (devserver):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6996
Reviewed By: ajkr
Differential Revision: D22105746
Pulled By: riversand963
fbshipit-source-id: b22f717a423457a41ca152a242abbb64cf91fc38
Summary:
Compressed block cache is disabled in https://github.com/facebook/rocksdb/pull/4650 for no good reason. Re-enable it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6990
Test Plan: Add a unit test to make sure a general function works with read-only DB + compressed block cache.
Reviewed By: ltamasi
Differential Revision: D22072755
fbshipit-source-id: 2a55df6363de23a78979cf6c747526359e5dc7a1
Summary:
`db_id` and `db_session_id` are now part of the table properties for all formats and stored in SST files. This adds about 99 bytes to each new SST file.
The `TablePropertiesNames` for these two identifiers are `rocksdb.creating.db.identity` and `rocksdb.creating.session.identity`.
In addition, SST files generated from SstFileWriter and Repairer have DB identity “SST Writer” and “DB Repairer”, respectively. Their DB session IDs are generated in the same way as `DB::GetDbSessionId`.
A table property test is added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6983
Test Plan: make check and some manual tests.
Reviewed By: zhichao-cao
Differential Revision: D22048826
Pulled By: gg814
fbshipit-source-id: afdf8c11424a6f509b5c0b06dafad584a80103c9
Summary:
In best-efforts recovery, an error that is not Corruption or IOError::kNotFound or IOError::kPathNotFound will be overwritten silently. Fix this by checking all non-ok cases and return early.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6989
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D22071418
Pulled By: riversand963
fbshipit-source-id: 5a4ea5dfb1a41f41c7a3fdaf62b163007b42f04b
Summary:
Best-efforts recovery does not check the content of CURRENT file to determine which MANIFEST to recover from. However, it still checks the presence of CURRENT file to determine whether to create a new DB during `open()`. Therefore, we can tweak the logic in `open()` a little bit so that best-efforts recovery does not rely on CURRENT file at all.
Test plan (dev server):
make check
./db_basic_test --gtest_filter=DBBasicTest.RecoverWithNoCurrentFile
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6970
Reviewed By: anand1976
Differential Revision: D22013990
Pulled By: riversand963
fbshipit-source-id: db552a1868c60ed70e1f7cd252a3a076eb8ea58f
Summary:
Added DB::GetDbSessionId by using the same format and machinery as DB::GetDbIdentity.
The DB Session ID is generated (and therefore, updated) each time a DB object is opened. It is written to the LOG file right after the line of “DB SUMMARY”.
A test for the uniqueness, for different openings and during the same opening, is also added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6959
Test Plan: Passed make check
Reviewed By: zhichao-cao
Differential Revision: D21951721
Pulled By: gg814
fbshipit-source-id: 958a48a612db49a39998ea703cded45987d3fa8b
Summary:
Persistent cache feature caused rocks db crash on windows. I posted a issue for it, https://github.com/facebook/rocksdb/issues/6919. I found this is because no "persistent_cache_key_prefix" is generated for persistent cache. Looking repo history, "GetUniqueIdFromFile" is not implemented on Windows. So my fix is adding "NewId()" function in "persistent_cache" and using it to generate prefix for persistent cache. In this PR, i also re-enable related test cases defined in "db_test2" and "persistent_cache_test" for windows.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6932
Test Plan:
1. run related test cases in "db_test2" and "persistent_cache_test" on windows and see it passed.
2. manually run db_bench.exe with "read_cache_path" and verified.
Reviewed By: riversand963
Differential Revision: D21911608
Pulled By: cheng-chang
fbshipit-source-id: cdfd938d54a385edbb2836b13aaa1d39b0a6f1c2
Summary:
The `FileMetaData` objects associated with table files already contain the
number of the oldest blob file referenced by the SST in question. This patch
adds the inverse mapping to `BlobFileMetaData`, namely the set of table file
numbers for which the oldest blob file link points to the given blob file (these
are referred to as *linked SSTs*). This mapping will be used by the GC logic.
Implementation-wise, the patch builds on the `BlobFileMetaDataDelta`
functionality introduced in https://github.com/facebook/rocksdb/pull/6835: newly linked/unlinked SSTs are
accumulated in `BlobFileMetaDataDelta`, and the changes to the linked SST set
are applied in one shot when the new `Version` is saved. The patch also reworks
the blob file related consistency checks in `VersionBuilder` so they validate the
consistency of the forward table file -> blob file links and the backward blob file ->
table file links for blob files that are part of the `Version`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6945
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D21912228
Pulled By: ltamasi
fbshipit-source-id: c5bc7acf6e729a8fccbb12672dd5cd00f6f000f8
Summary:
If `options.wal_recovery_mode == WALRecoveryMode::kPointInTimeRecovery`, RocksDB stops replaying WAL once hitting an error and discards the rest of the WAL. This can lead to data loss if the error occurs at an offset smaller than the last sync'ed offset.
Ideally, RocksDB point-in-time recovery should permit recovery if the error occurs after last synced offset while fail recovery if error occurs before the last synced offset. However, RocksDB does not track the synced offset of WALs. Consequently, RocksDB does not know whether an error occurs before or after the last synced offset. An error can be one of the following.
- WAL record checksum mismatch. This can result from both corruption of synced data and dropping of unsynced data during shutdown. We cannot be sure which one. In order not to defeat the original motivation to permit the latter case, we keep the original behavior of point-in-time WAL recovery.
- IOError. This means the WAL can be bad, an indicator of whole file becoming unavailable, not to mention synced part of the WAL. Therefore, we choose to modify the behavior of point-in-time recovery and fail the database recovery.
Test plan (devserver):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6963
Reviewed By: ajkr
Differential Revision: D22011083
Pulled By: riversand963
fbshipit-source-id: f9cbf29a37dc5cc40d3fa62f89eed1ad67ca1536
Summary:
https://github.com/facebook/rocksdb/pull/6901 subtly changed the handling of the corner case
when a table file is deleted from a level, then re-added to the same level. (Note: this
should be extremely rare; one scenario that comes to mind is a trivial move followed by
a call to `ReFitLevel` that moves the file back to the original level.) Before that change,
a new `FileMetaData` object was created as a result of this sequence; after the change,
the original `FileMetaData` was essentially resurrected (since the deletion and the addition
simply cancel each other out with the change). This patch restores the original behavior,
which is more intuitive considering the interface, and in sync with how trivial moves are handled.
(Also note that `FileMetaData` contains some mutable data members, the values of which
might be different in the resurrected object and the freshly created one.)
The PR also fixes a bug in this area: with the original pre-6901 code, `VersionBuilder`
would add the same file twice to the same level in the scenario described above.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6939
Test Plan: `make check`
Reviewed By: ajkr
Differential Revision: D21905580
Pulled By: ltamasi
fbshipit-source-id: da07ae45384ecf3c6c53506d106432d88a7ec9df
Summary:
`DBTest2.CompressionFailures` currently tests many configurations
sequentially using nested loops, which often leads to timeouts
in our test system. The patch turns it into a parameterized test
instead.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6968
Test Plan: `make check`
Reviewed By: siying
Differential Revision: D22006954
Pulled By: ltamasi
fbshipit-source-id: f71f2f7108086b7651ecfce3d79a7fab24620b2c
Summary:
Application can ingest SST files with file checksum information, such that during ingestion, DB is able to check data integrity and identify of the SST file. The PR introduces generate_and_verify_file_checksum to IngestExternalFileOption to control if the ingested checksum information should be verified with the generated checksum.
1. If generate_and_verify_file_checksum options is *FALSE*: *1)* if DB does not enable SST file checksum, the checksum information ingested will be ignored; *2)* if DB enables the SST file checksum and the checksum function name matches the checksum function name in DB, we trust the ingested checksum, store it in Manifest. If the checksum function name does not match, we treat that as an error and fail the IngestExternalFile() call.
2. If generate_and_verify_file_checksum options is *TRUE*: *1)* if DB does not enable SST file checksum, the checksum information ingested will be ignored; *2)* if DB enable the SST file checksum, we will use the checksum generator from DB to calculate the checksum for each ingested SST files after they are copied or moved. Then, compare the checksum results with the ingested checksum information: _A)_ if the checksum function name does not match, _verification always report true_ and we store the DB generated checksum information in Manifest. _B)_ if the checksum function name mach, and checksum match, ingestion continues and stores the checksum information in the Manifest. Otherwise, terminate file ingestion and report file corruption.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6891
Test Plan: added unit test, pass make asan_check
Reviewed By: pdillinger
Differential Revision: D21935988
Pulled By: zhichao-cao
fbshipit-source-id: 7b55f486632db467e76d72602218d0658aa7f6ed
Summary:
This is required so that the test cases can safely be run in parallel.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6962
Test Plan: `make check`
Reviewed By: zhichao-cao
Differential Revision: D21980060
Pulled By: ltamasi
fbshipit-source-id: 616b7a0b686155d3874848b9098c67ad3f47efcc
Summary:
Memory pinned by `pin_l0_filter_and_index_blocks_in_cache` needs to be predictable based on user config. This PR makes sure
we do not pin extra memory for large files generated by intra-L0 (see https://github.com/facebook/rocksdb/issues/6889).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6911
Test Plan: unit test
Reviewed By: siying
Differential Revision: D21835818
Pulled By: ajkr
fbshipit-source-id: a11a088549d06bed8aacc2548d266e5983f0ead4
Summary:
When MultiGet is called with duplicate keys, and the key matches the
largest key in an SST file and the value type is merge, only the first
instance of the duplicate key is returned with correct results. This is
due to the incorrect assumption that if a key in a batch is equal to the
largest key in the file, the next key cannot be present in that file.
Tests:
Add a new unit test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6953
Reviewed By: cheng-chang
Differential Revision: D21935898
Pulled By: anand1976
fbshipit-source-id: a2cc327a15150e23fd997546ca64d1c33021cb4c
Summary:
The patch adds a convenience method `GetFileMetaDataByNumber` that
builds on the `FileLocation` functionality introduced recently (see
https://github.com/facebook/rocksdb/pull/6862). This method makes it possible to
retrieve the `FileMetaData` directly as opposed to having to go through
`LevelFiles` and friends.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6940
Test Plan: `make check`
Reviewed By: cheng-chang
Differential Revision: D21905946
Pulled By: ltamasi
fbshipit-source-id: af99e19de21242b2b4a87594a535c6028d16ee72
Summary:
In db_options.c, we should avoid including header files in the `db` directory to avoid introducing unnecessary dependency. The reason why `version_edit.h` has been included in `db_options.cc` is because we need two constants, `kUnknownChecksum` and `kUnknownChecksumFuncName`. We can put these two constants as `constexpr` in the public header `file_checksum.h`.
Test plan (devserver):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6952
Reviewed By: zhichao-cao
Differential Revision: D21925341
Pulled By: riversand963
fbshipit-source-id: 2902f3b74c97f0cf16c58ad24c095c787c3a40e2
Summary:
RocksDB is an embedded library; we should not write to the application's
console. Note: in each case, the same information is returned in the form of a
`Status::Corruption` object.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6948
Test Plan: `make check`
Reviewed By: ajkr
Differential Revision: D21914965
Pulled By: ltamasi
fbshipit-source-id: ae4b66789aa6b659eb8cc2ed4a048187962c86cc
Summary:
We currently do not have any validation that would ensure that the `FileMetaData`
objects are equivalent when a file gets deleted from the LSM tree and then re-added
(think trivial moves); however, if we did, this test case would be in violation. The patch
changes the values used in the test case so they are consistent.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6942
Test Plan: `make check`
Reviewed By: zhichao-cao
Differential Revision: D21911366
Pulled By: ltamasi
fbshipit-source-id: 2f0486f8337373a6a111b6f28433d70507857104
Summary:
The ```for``` loop in ```VerifyChecksumInBlocks``` only checks ```index_iter->Valid()``` which could be ```false``` either due to reaching the end of the index or, in case of partitioned index, it could be due to a checksum mismatch error when reading a 2nd level index block. Instead of throwing away the index iterator status, we need to return any errors back to the caller.
Tests:
Add a test in block_based_table_reader_test.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6909
Reviewed By: pdillinger
Differential Revision: D21833922
Pulled By: anand1976
fbshipit-source-id: bc778ebf1121dbbdd768689de5183f07a9f0beae
Summary:
Confusing checks for null that are never null
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6933
Test Plan: make check
Reviewed By: cheng-chang
Differential Revision: D21885466
Pulled By: pdillinger
fbshipit-source-id: 4b48e03c2a33727f2702b0d12292f9fda5a3c475
Summary:
As title. The prior change to the line is a typo. Fixing it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6928
Test Plan: make check
Reviewed By: zhichao-cao
Differential Revision: D21873587
Pulled By: riversand963
fbshipit-source-id: f4837fc8792d7106bc230b7b499dfbb7a2847430
Summary:
DB::OpenForReadOnly will not write anything to the file system (i.e., create directories or files for the DB) unless create_if_missing is true.
This change also fixes some subcommands of ldb, which write to the file system even if the purpose is for readonly.
Two tests for this updated behavior of DB::OpenForReadOnly are also added.
Other minor changes:
1. Updated HISTORY.md to include this API change of DB::OpenForReadOnly;
2. Updated the help information for the put and batchput subcommands of ldb with the option [--create_if_missing];
3. Updated the comment of Env::DeleteDir to emphasize that it returns OK only if the directory to be deleted is empty.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6900
Test Plan: passed make check; also manually tested a few ldb subcommands
Reviewed By: pdillinger
Differential Revision: D21822188
Pulled By: gg814
fbshipit-source-id: 604cc0f0d0326a937ee25a32cdc2b512f9a3be6e
Summary:
This reverts commit 8d87e9cea1.
Based on offline discussions, it's too early to upgrade to gtest 1.10, as it prevents some developers from using an older version of gtest to integrate to some other systems. Revert it for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6923
Reviewed By: pdillinger
Differential Revision: D21864799
fbshipit-source-id: d0726b1ff649fc911b9378f1763316200bd363fc
Summary:
Added setting of zstd_max_train_bytes compression option parameter to c interop.
rocksdb_options_set_bottommost_compression_options was using bool parameter and thus not exported, updated it to unsigned char and added to c.h as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6796
Reviewed By: cheng-chang
Differential Revision: D21611471
Pulled By: ajkr
fbshipit-source-id: caaaf153de934837ad9af283c7f8c025ff0b0cf5
Summary:
People keep breaking the gcc 4.8 compilation due to different
warnings for shadowing member functions with locals. Adding to Travis
to keep compatibility. (gcc 4.8 is default on CentOS 7.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6915
Test Plan: local and Travis
Reviewed By: siying
Differential Revision: D21842894
Pulled By: pdillinger
fbshipit-source-id: bdcd4385127ee5d1cc222d87e53fb3695c32a9d4
Summary:
The patch cleans up the code and improves the consistency checks around
adding/deleting table files in `VersionBuilder`. Namely, it makes the checks
stricter and improves them in the following ways:
1) A table file can now only be deleted from the LSM tree using the level it
resides on. Earlier, there was some unnecessary wiggle room for
trivially moved files (they could be deleted using a lower level number than
the actual one).
2) A table file cannot be added to the tree if it is already present in the tree
on any level (not just the target level). The earlier code only had an assertion
(which is a no-op in release builds) that the newly added file is not already
present on the target level.
3) The above consistency checks around state transitions are now mandatory,
as opposed to the earlier `CheckConsistencyForDeletes`, which was a no-op
in release mode unless `force_consistency_checks` was set to `true`. The rationale
here is that assuming that the initial state is consistent, a valid transition leads to a
next state that is also consistent; however, an *invalid* transition offers no such
guarantee. Hence it makes sense to validate the transitions unconditionally,
and save `force_consistency_checks` for the paranoid checks that re-validate
the entire state.
4) The new checks build on the mechanism introduced in https://github.com/facebook/rocksdb/pull/6862,
which enables us to efficiently look up the location (level and position within level)
of files in a `Version` by file number. This makes the consistency checks much more
efficient than the earlier `CheckConsistencyForDeletes`, which essentially
performed a linear search.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6901
Test Plan:
Extended the unit tests and ran:
`make check`
`make whitebox_crash_test`
Reviewed By: ajkr
Differential Revision: D21822714
Pulled By: ltamasi
fbshipit-source-id: e2b29c8b6da1bf0f59004acc889e4870b2d18215
Summary:
Because ARM and some other platforms have a larger cache line
size, they have a larger minimum filter size, which causes recently
added PartitionedMultiGet test in db_bloom_filter_test to fail on those
platforms. The code would actually end up using larger partitions,
because keys_per_partition_ would be 0 and never == number of keys
added.
The code now attempts to get as close as possible to the small target
size, while fully utilizing that filter size, if the target partition
size is smaller than the minimum filter size.
Also updated the test to break more uniformly across platforms
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6905
Test Plan: updated test, tested on ARM
Reviewed By: anand1976
Differential Revision: D21840639
Pulled By: pdillinger
fbshipit-source-id: 11684b6d35f43d2e98b85ddb2c8dcfd59d670817
Summary:
x.size() -1 or y - 1 can overflow to an extremely large value when x.size() pr y is 0 when they are unsigned type. The end condition of i in the for loop will be extremely large, potentially causes segment fault. Fix them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6902
Test Plan: pass make asan_check
Reviewed By: ajkr
Differential Revision: D21843767
Pulled By: zhichao-cao
fbshipit-source-id: 5b8b88155ac5a93d86246d832e89905a783bb5a1
Summary:
The implementation of GetApproximateSizes was inconsistent in
its treatment of the size of non-data blocks of SST files, sometimes
including and sometimes now. This was at its worst with large portion
of table file used by filters and querying a small range that crossed
a table boundary: the size estimate would include large filter size.
It's conceivable that someone might want only to know the size in terms
of data blocks, but I believe that's unlikely enough to ignore for now.
Similarly, there's no evidence the internal function AppoximateOffsetOf
is used for anything other than a one-sided ApproximateSize, so I intend
to refactor to remove redundancy in a follow-up commit.
So to fix this, GetApproximateSizes (and implementation details
ApproximateSize and ApproximateOffsetOf) now consistently include in
their returned sizes a portion of table file metadata (incl filters
and indexes) based on the size portion of the data blocks in range. In
other words, if a key range covers data blocks that are X% by size of all
the table's data blocks, returned approximate size is X% of the total
file size. It would technically be more accurate to attribute metadata
based on number of keys, but that's not computationally efficient with
data available and rarely a meaningful difference.
Also includes miscellaneous comment improvements / clarifications.
Also included is a new approximatesizerandom benchmark for db_bench.
No significant performance difference seen with this change, whether ~700 ops/sec with cache_index_and_filter_blocks and small cache or ~150k ops/sec without cache_index_and_filter_blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6784
Test Plan:
Test added to DBTest.ApproximateSizesFilesWithErrorMargin.
Old code running new test...
[ RUN ] DBTest.ApproximateSizesFilesWithErrorMargin
db/db_test.cc:1562: Failure
Expected: (size) <= (11 * 100), actual: 9478 vs 1100
Other tests updated to reflect consistent accounting of metadata.
Reviewed By: siying
Differential Revision: D21334706
Pulled By: pdillinger
fbshipit-source-id: 6f86870e45213334fedbe9c73b4ebb1d8d611185
Summary:
`IterKey::UpdateInternalKey()` is an error-prone API as it's
incompatible with `IterKey::TrimAppend()`, which is used for
decoding delta-encoded internal keys. This PR stops using it in
`BlockIter`. Instead, it assigns global seqno in a separate `IterKey`'s
buffer when needed. The logic for safely getting a Slice with global
seqno properly assigned is encapsulated in `GlobalSeqnoAppliedKey`.
`BinarySeek()` is also migrated to use this API (previously it ignored
global seqno entirely).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6843
Test Plan:
benchmark setup -- single file DBs, in-memory, no compression. "normal_db"
created by regular flush; "ingestion_db" created by ingesting a file. Both
DBs have same contents.
```
$ TEST_TMPDIR=/dev/shm/normal_db/ ./db_bench -benchmarks=fillrandom,compact -write_buffer_size=10485760000 -disable_auto_compactions=true -compression_type=none -num=1000000
$ ./ldb write_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/ --compression_type=no --hex --create_if_missing < <(./sst_dump --command=scan --output_hex --file=/dev/shm/normal_db/dbbench/000007.sst | awk 'began {print "0x" substr($1, 2, length($1) - 2), "==>", "0x" $5} ; /^Sst file format: block-based/ {began=1}')
$ ./ldb ingest_extern_sst ./tmp.sst --db=/dev/shm/ingestion_db/dbbench/
```
benchmark run command:
```
TEST_TMPDIR=/dev/shm/$DB/ ./db_bench -benchmarks=seekrandom -seek_nexts=10 -use_existing_db=true -cache_index_and_filter_blocks=false -num=1000000 -cache_size=1048576000 -threads=1 -reads=40000000
```
results:
| DB | code | throughput |
|---|---|---|
| normal_db | master | 267.9 |
| normal_db | PR6843 | 254.2 (-5.1%) |
| ingestion_db | master | 259.6 |
| ingestion_db | PR6843 | 250.5 (-3.5%) |
Reviewed By: pdillinger
Differential Revision: D21562604
Pulled By: ajkr
fbshipit-source-id: 937596f836930515da8084d11755e1f247dcb264
Summary:
Preliminary user-timestamp support for delete.
If ["a", ts=100] exists, you can delete it by calling `DB::Delete(write_options, key)` in which `write_options.timestamp` points to a `ts` higher than 100.
Implementation
A new ValueType, i.e. `kTypeDeletionWithTimestamp` is added for deletion marker with timestamp.
The reason for a separate `kTypeDeletionWithTimestamp`: RocksDB may drop tombstones (keys with kTypeDeletion) when compacting them to the bottom level. This is OK and useful if timestamp is disabled. When timestamp is enabled, should we still reuse `kTypeDeletion`, we may drop the tombstone with a more recent timestamp, causing deleted keys to re-appear.
Test plan (dev server)
```
make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6253
Reviewed By: ltamasi
Differential Revision: D20995328
Pulled By: riversand963
fbshipit-source-id: a9e5c22968ad76f98e3dc6ee0151265a3f0df619
Summary:
Does what it says on the can: the patch adds a hash map to `VersionStorageInfo`
that maps file numbers to file locations, i.e. (level, position in level) pairs. This
will enable stricter consistency checks in `VersionBuilder`. The patch also fixes
all the unit tests that used duplicate file numbers in a version (which would trigger
an assertion with the new code).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6862
Test Plan:
`make check`
`make whitebox_crash_test`
Reviewed By: riversand963
Differential Revision: D21670446
Pulled By: ltamasi
fbshipit-source-id: 2eac249945cf33d8fb8597b26bfff5221e1a861a
Summary:
1. Add a value_size in read options which limits the cumulative value size of keys read in batches. Once the size exceeds read_options.value_size, all the remaining keys are returned with status Abort without further fetching any key.
2. Add a unit test case MultiGetBatchedValueSizeSimple the reads keys from memory and sst files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6826
Test Plan:
1. make check -j64
2. Add a new unit test case
Reviewed By: anand1976
Differential Revision: D21471483
Pulled By: akankshamahajan15
fbshipit-source-id: dea51b8e76d5d1df38ece8cdb29933b1d798b900
Summary:
If Option.file_checksum_gen_factory is set, rocksdb generates the file checksum during flush and compaction based on the checksum generator created by the factory and store the checksum and function name in vstorage and Manifest.
This PR enable file checksum generation in SstFileWrite and store the checksum and checksum function name in the ExternalSstFileInfo, such that application can use them for other purpose, for example, ingest the file checksum with files in IngestExternalFile().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6859
Test Plan: add unit test and pass make asan_check.
Reviewed By: ajkr
Differential Revision: D21656247
Pulled By: zhichao-cao
fbshipit-source-id: 78a3570c76031d8832e3d2de3d6c79cdf2b675d0
Summary:
This patch is groundwork for an upcoming change to store the set of
linked SSTs in `BlobFileMetaData`. With the current code, a new
`BlobFileMetaData` object is created each time a `VersionEdit` touches
a certain blob file. This is fine as long as these objects are lightweight
and cheap to create; however, with the addition of the linked SST set, it would
be very inefficient since the set would have to be copied over and over again.
Note that this is the same kind of problem that `VersionBuilder` is solving
w/r/t `Version`s and files, and we can apply the same solution; that is, we can
accumulate the changes in a different mutable object, and apply the delta in
one shot when the changes are committed. The patch does exactly that by
adding a new `BlobFileMetaDataDelta` class to `VersionBuilder`. In addition,
it turns the existing `GetBlobFileMetaData` helper into `IsBlobFileInVersion`
(which is fine since that's the only thing the method's clients care about now),
and adds a couple of helper methods that can create a `BlobFileMetaData`
object from the `BlobFileMetaData` in the base (if applicable) and the delta
when the `Version` is saved.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6835
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D21505187
Pulled By: ltamasi
fbshipit-source-id: d81a48c5f2ca7b79d7124c935332a6bcf3d5d988
Summary:
sst_dump can issue many file reads from the file system. This doesn't work well with file systems without a OS cache, especially remote file systems. In order to mitigate this problem, several improvements are done:
1. --readahead_size is added, so that users can specify readahead size when scanning the data.
2. Force a 512KB tail readahead, which prevents three I/Os for footer, meta index and property blocks and hopefully index and filter blocks too.
3. Consoldiate SSTDump's I/Os before opening the file for read. Use the same file prefetch buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6836
Test Plan: Add a test that covers this new feature.
Reviewed By: pdillinger
Differential Revision: D21516607
fbshipit-source-id: 3ae43526286f67b2f4a5bdedfbc92719d579b87e
Summary:
Currently there is no check for whether BlockBasedTableBuilder will expose
compression error status if compression fails during the table building.
This commit adds fake faulting compressors and a unit test to test such
cases.
This check finds 5 bugs, and this commit also fixes them:
1. Not handling compression failure well in
BlockBasedTableBuilder::BGWorkWriteRawBlock.
2. verify_compression failing in BlockBasedTableBuilder when used with ZSTD.
3. Wrongly passing the same reference of block contents to
BlockBasedTableBuilder::CompressAndVerifyBlock in parallel compression.
4. Wrongly setting block_rep->first_key_in_next_block to nullptr in
BlockBasedTableBuilder::EnterUnbuffered when there are still incoming data
blocks.
5. Not maintaining variables for compression ratio estimation and first_block
in BlockBasedTableBuilder::EnterUnbuffered.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6709
Reviewed By: ajkr
Differential Revision: D21236254
fbshipit-source-id: 101f6e62b2bac2b7be72be198adf93cd32a1ff46
