Summary:
Essentially refactored the RangeMayExist implementation in
FullFilterBlockReader to FilterBlockReaderCommon so that it applies to
partitioned filters as well. (The function is not called for the
block-based filter case.) RangeMayExist is essentially a series of checks
around a possible PrefixMayExist, and I'm confident those checks should
be the same for partitioned as for full filters. (I think it's likely
that bugs remain in those checks, but this change is overall a simplifying
one.)
Added auto_prefix_mode support to db_bench
Other small fixes as well
Fixes https://github.com/facebook/rocksdb/issues/10003
Pull Request resolved: https://github.com/facebook/rocksdb/pull/10012
Test Plan:
Expanded unit test that uses statistics to check for filter
optimization, fails without the production code changes here
Performance: populate two DBs with
```
TEST_TMPDIR=/dev/shm/rocksdb_nonpartitioned ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=30000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=8
TEST_TMPDIR=/dev/shm/rocksdb_partitioned ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=30000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=8 -partition_index_and_filters
```
Observe no measurable change in non-partitioned performance
```
TEST_TMPDIR=/dev/shm/rocksdb_nonpartitioned ./db_bench -benchmarks=seekrandom[-X1000] -num=10000000 -readonly -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=8 -auto_prefix_mode -cache_index_and_filter_blocks=1 -cache_size=1000000000 -duration 20
```
Before: seekrandom [AVG 15 runs] : 11798 (± 331) ops/sec
After: seekrandom [AVG 15 runs] : 11724 (± 315) ops/sec
Observe big improvement with partitioned (also supported by bloom use statistics)
```
TEST_TMPDIR=/dev/shm/rocksdb_partitioned ./db_bench -benchmarks=seekrandom[-X1000] -num=10000000 -readonly -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=8 -partition_index_and_filters -auto_prefix_mode -cache_index_and_filter_blocks=1 -cache_size=1000000000 -duration 20
```
Before: seekrandom [AVG 12 runs] : 2942 (± 57) ops/sec
After: seekrandom [AVG 12 runs] : 7489 (± 184) ops/sec
Reviewed By: siying
Differential Revision: D36469796
Pulled By: pdillinger
fbshipit-source-id: bcf1e2a68d347b32adb2b27384f945434e7a266d
Summary:
Start tracking SST unique id in MANIFEST, which is used to verify with
SST properties to make sure the SST file is not overwritten or
misplaced. A DB option `try_verify_sst_unique_id` is introduced to
enable/disable the verification, if enabled, it opens all SST files
during DB-open to read the unique_id from table properties (default is
false), so it's recommended to use it with `max_open_files = -1` to
pre-open the files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9990
Test Plan: unittests, format-compatible test, mini-crash
Reviewed By: anand1976
Differential Revision: D36381863
Pulled By: jay-zhuang
fbshipit-source-id: 89ea2eb6b35ed3e80ead9c724eb096083eaba63f
Summary:
**Context:**
Previous PR https://github.com/facebook/rocksdb/pull/9748, https://github.com/facebook/rocksdb/pull/9073, https://github.com/facebook/rocksdb/pull/8428 added separate flag for each charged memory area. Such API design is not scalable as we charge more and more memory areas. Also, we foresee an opportunity to consolidate this feature with other cache usage related features such as `cache_index_and_filter_blocks` using `CacheEntryRole`.
Therefore we decided to consolidate all these flags with `CacheUsageOptions cache_usage_options` and this PR serves as the first step by consolidating memory-charging related flags.
**Summary:**
- Replaced old API reference with new ones, including making `kCompressionDictionaryBuildingBuffer` opt-out and added a unit test for that
- Added missing db bench/stress test for some memory charging features
- Renamed related test suite to indicate they are under the same theme of memory charging
- Refactored a commonly used mocked cache component in memory charging related tests to reduce code duplication
- Replaced the phrases "memory tracking" / "cache reservation" (other than CacheReservationManager-related ones) with "memory charging" for standard description of this feature.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9926
Test Plan:
- New unit test for opt-out `kCompressionDictionaryBuildingBuffer` `TEST_F(ChargeCompressionDictionaryBuildingBufferTest, Basic)`
- New unit test for option validation/sanitization `TEST_F(CacheUsageOptionsOverridesTest, SanitizeAndValidateOptions)`
- CI
- db bench (in case querying new options introduces regression) **+0.5% micros/op**: `TEST_TMPDIR=/dev/shm/testdb ./db_bench -benchmarks=fillseq -db=$TEST_TMPDIR -charge_compression_dictionary_building_buffer=1(remove this for comparison) -compression_max_dict_bytes=10000 -disable_auto_compactions=1 -write_buffer_size=100000 -num=4000000 | egrep 'fillseq'`
#-run | (pre-PR) avg micros/op | std micros/op | (post-PR) micros/op | std micros/op | change (%)
-- | -- | -- | -- | -- | --
10 | 3.9711 | 0.264408 | 3.9914 | 0.254563 | 0.5111933721
20 | 3.83905 | 0.0664488 | 3.8251 | 0.0695456 | **-0.3633711465**
40 | 3.86625 | 0.136669 | 3.8867 | 0.143765 | **0.5289363078**
- db_stress: `python3 tools/db_crashtest.py blackbox -charge_compression_dictionary_building_buffer=1 -charge_filter_construction=1 -charge_table_reader=1 -cache_size=1` killed as normal
Reviewed By: ajkr
Differential Revision: D36054712
Pulled By: hx235
fbshipit-source-id: d406e90f5e0c5ea4dbcb585a484ad9302d4302af
Summary:
This PR
- since we are testing with disable_wal = true and best_efforts_recovery, we should set column family count to 1, due to the requirement of `ExpectedState` tracking and replaying logic.
- during backup and checkpoint restore, disable best-efforts-recovery. This does not matter now because db_crashtest.py always disables wal when testing best-efforts-recovery. In the future, if we enable wal, then not setting `restore_opitions.best_efforts_recovery` will cause backup db not to recover the WALs, and differ from db (that enables WAL).
- during verification of backup and checkpoint restore, print the key where inconsistency exists between expected state and db.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9986
Test Plan: TEST_TMPDIR=/dev/shm/rocksdb make crash_test_with_best_efforts_recovery
Reviewed By: siying
Differential Revision: D36353105
Pulled By: riversand963
fbshipit-source-id: a484da161273e6216a1f7e245bac15a349693917
Summary:
https://github.com/facebook/rocksdb/issues/9961 broke format_compatible check because of `make clean`
referencing TEST_TMPDIR. The Makefile behavior seems reasonable to me,
so here's a fix in check_format_compatible.sh
Apparently I also included removing a redundant part of our CircleCI config.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9970
Test Plan: manual run: SHORT_TEST=1 ./tools/check_format_compatible.sh
Reviewed By: riversand963
Differential Revision: D36258172
Pulled By: pdillinger
fbshipit-source-id: d46507f04614e888b414ff23b88d040ae2b5c294
Summary:
ToString() is created as some platform doesn't support std::to_string(). However, we've already used std::to_string() by mistake for 16 months (in db/db_info_dumper.cc). This commit just remove ToString().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9955
Test Plan: Watch CI tests
Reviewed By: riversand963
Differential Revision: D36176799
fbshipit-source-id: bdb6dcd0e3a3ab96a1ac810f5d0188f684064471
Summary:
Previously all fault injection was ignored in release mode. This PR adds it back except for read fault injection (`--read_fault_one_in > 0`) since its dependency (`IGNORE_STATUS_IF_ERROR`) is unavailable in release mode.
Other notable changes include:
- Moved `EnableWriteErrorInjection()` for `--write_fault_one_in > 0` so it's after `DB::Open()` without depending on `SyncPoint`
- Made `--read_fault_one_in > 0` return an error in release mode
- Updated `db_crashtest.py` to always set `--read_fault_one_in=0` in release mode
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9957
Test Plan:
```
$ DEBUG_LEVEL=0 make -j24 db_stress
$ DEBUG_LEVEL=0 TEST_TMPDIR=/dev/shm python3 tools/db_crashtest.py blackbox
```
Reviewed By: anand1976
Differential Revision: D36193830
Pulled By: ajkr
fbshipit-source-id: 0b97946b4e3f06e3e0f6e7833c2763da08ec5321
Summary:
`db_stress` already tracks expected state history to verify prefix-recoverability when `sync_fault_injection` is enabled. This PR enables `sync_fault_injection` in `db_crashtest.py`.
Previously enabling `sync_fault_injection` would cause whole unsynced files to be dropped. This PR adds a more interesting case of losing only the tail of unsynced data by implementing `TestFSWritableFile::RangeSync()` and enabling `{wal_,}bytes_per_sync`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9947
Test Plan:
- regular blackbox, blackbox --simple
- various commands to stress this new case, such as `TEST_TMPDIR=/dev/shm python3 tools/db_crashtest.py blackbox --max_key=100000 --write_buffer_size=2097152 --avoid_flush_during_recovery=1 --disable_wal=0 --interval=10 --db_write_buffer_size=0 --sync_fault_injection=1 --wal_compression=none --delpercent=0 --delrangepercent=0 --prefixpercent=0 --iterpercent=0 --writepercent=100 --readpercent=0 --wal_bytes_per_sync=131072 --duration=36000 --sync=0 --open_write_fault_one_in=16`
Reviewed By: riversand963
Differential Revision: D36152775
Pulled By: ajkr
fbshipit-source-id: 44b68a7fad0a4cf74af9fe1f39be01baab8141d8
Summary:
Right now we still don't fully use std::numeric_limits but use a macro, mainly for supporting VS 2013. Right now we only support VS 2017 and up so it is not a problem. The code comment claims that MinGW still needs it. We don't have a CI running MinGW so it's hard to validate. since we now require C++17, it's hard to imagine MinGW would still build RocksDB but doesn't support std::numeric_limits<>.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9954
Test Plan: See CI Runs.
Reviewed By: riversand963
Differential Revision: D36173954
fbshipit-source-id: a35a73af17cdcae20e258cdef57fcf29a50b49e0
Summary:
This is inspired by debugging a regression test that runs for ~0.05 seconds and the short
running time makes it prone to variance. While db_bench ran for ~60 seconds, 59.95 seconds
was spent opening 128 databases (and doing recovery). So it was harder to notice that the
benchmark only ran for 0.05 seconds.
Normally I add output to the end of the line to make life easier for existing tools that parse it
but in this case the output near the end of the line has two optional parts and one of the optional
parts adds an extra newline.
This is for https://github.com/facebook/rocksdb/issues/9856
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9886
Test Plan:
./db_bench --benchmarks=overwrite,readrandom --num=1000000 --threads=4
old output:
DB path: [/tmp/rocksdbtest-2260/dbbench]
overwrite : 14.108 micros/op 283338 ops/sec; 31.3 MB/s
DB path: [/tmp/rocksdbtest-2260/dbbench]
readrandom : 7.994 micros/op 496788 ops/sec; 55.0 MB/s (1000000 of 1000000 found)
new output:
DB path: [/tmp/rocksdbtest-2260/dbbench]
overwrite : 14.117 micros/op 282862 ops/sec 14.141 seconds 4000000 operations; 31.3 MB/s
DB path: [/tmp/rocksdbtest-2260/dbbench]
readrandom : 8.649 micros/op 458475 ops/sec 8.725 seconds 4000000 operations; 49.8 MB/s (981548 of 1000000 found)
Reviewed By: ajkr
Differential Revision: D36102269
Pulled By: mdcallag
fbshipit-source-id: 5cd8a9e11f5cbe2a46809571afd83335b6b0caa0
Summary:
If the DB path is specified, the user would expect ldb loads the
options from the path, but it's not:
```
$ ldb list_live_files_metadata --db=`pwd`
```
Default `try_load_options` to true in that case. The user can still
disable that by:
```
$ ldb list_live_files_metadata --db=`pwd` --try_load_options=false
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9937
Test Plan:
`ldb list_live_files_metadata --db=`pwd`` is able to work for
a db generated with different options.num_levels.
Reviewed By: ajkr
Differential Revision: D36106708
Pulled By: jay-zhuang
fbshipit-source-id: 2732fdc027a4d172436b2c9b6a9787b56b10c710
Summary:
When compaction filter determines that a key should be removed, it updates the internal key's type
to `Delete`. If this internal key is preserved in current compaction but seen by a later compaction
together with `SingleDelete`, it will cause compaction iterator to return Corruption.
To fix the issue, compaction filter should return more information in addition to the intention of removing
a key. Therefore, we add a new `kRemoveWithSingleDelete` to `CompactionFilter::Decision`. Seeing
`kRemoveWithSingleDelete`, compaction iterator will update the op type of the internal key to `kTypeSingleDelete`.
In addition, I updated db_stress_shared_state.[cc|h] so that `no_overwrite_ids_` becomes `const`. It is easier to
reason about thread-safety if accessed from multiple threads. This information is passed to `PrepareTxnDBOptions()`
when calling from `Open()` so that we can set up the rollback deletion type callback for transactions.
Finally, disable compaction filter for multiops_txn because the key removal logic of `DbStressCompactionFilter` does
not quite work with `MultiOpsTxnsStressTest`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9929
Test Plan:
make check
make crash_test
make crash_test_with_txn
Reviewed By: anand1976
Differential Revision: D36069678
Pulled By: riversand963
fbshipit-source-id: cedd2f1ba958af59ad3916f1ba6f424307955f92
Summary:
Adds more coverage to `MultiOpsTxnsStressTest` with a focus on write-prepared transactions.
1. Add a hack to manually evict commit cache entries. We currently cannot assign small values to `wp_commit_cache_bits` because it requires a prepared transaction to commit within a certain range of sequence numbers, otherwise it will throw.
2. Add coverage for commit-time-write-batch. If write policy is write-prepared, we need to set `use_only_the_last_commit_time_batch_for_recovery` to true.
3. After each flush/compaction, verify data consistency. This is possible since data size can be small: default numbers of primary/secondary keys are just 1000.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9829
Test Plan:
```
TEST_TMPDIR=/dev/shm/rocksdb_crashtest_blackbox/ make blackbox_crash_test_with_multiops_wp_txn
```
Reviewed By: pdillinger
Differential Revision: D35806678
Pulled By: riversand963
fbshipit-source-id: d7fde7a29fda0fb481a61f553e0ca0c47da93616
Summary:
This patch completes the second part of the task: "Add blob support to the dump and dump_live_files command"
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9896
Reviewed By: ltamasi
Differential Revision: D35852667
Pulled By: jowlyzhang
fbshipit-source-id: a006456c881f468a92da689e895134762e9574e1
Summary:
This patch is the first part of adding blob dump support. It only adds blob dump support to the dump command. A follow up patch will add blob dump support to the dump_live_files command.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9881
Reviewed By: ltamasi
Differential Revision: D35796731
Pulled By: jowlyzhang
fbshipit-source-id: 2cc5973b222d505a331ac7b969edcf992b47c5ee
Summary:
This patch completes the first part of the task: "Extend all three commands so they can decode and print blob references if a new option --decode_blob_index is specified"
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9870
Reviewed By: ltamasi
Differential Revision: D35753932
Pulled By: jowlyzhang
fbshipit-source-id: 9d2bbba0eef2ed86b982767eba9de1b4881f35c9
Summary:
`InitializeOptionsGeneral()` was overwriting many options that were already configured by OPTIONS file, potentially with the flag default values. This PR changes that function to only overwrite options in limited scenarios, as described at the top of its definition. Block cache is still a violation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9862
Test Plan: ran under various scenarios (multi-DB, single DB, OPTIONS file, flags) and verified options are set as expected
Reviewed By: jay-zhuang
Differential Revision: D35736960
Pulled By: ajkr
fbshipit-source-id: 75b77740af37e6f5741618f8a8f5685df2417d03
Summary:
Since they operate at distinct abstraction layers, I thought it
was prudent to combine with EncryptedEnv CI test for each PR, for efficiency
in testing. Also added supported compressions to sst_dump --help output
so that CI job can verify no compiled-in compression support.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9850
Test Plan: CI, some manual stuff
Reviewed By: riversand963
Differential Revision: D35682346
Pulled By: pdillinger
fbshipit-source-id: be9879c1533fed304ee32c89fd9ba4b07c2b90cc
Summary:
This change only add decode blob index support to dump_live_files command, which is part of a task to add blob support to a few commands.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9842
Reviewed By: ltamasi
Differential Revision: D35650167
Pulled By: jowlyzhang
fbshipit-source-id: a78151b98bc38ac6f52c6e01ca6927a3429ddd14
Summary:
Various renaming and fixes to get rid of remaining uses of
"backupable" which is terminology leftover from the original, flawed
design of BackupableDB. Now any DB can be backed up, using BackupEngine.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9792
Test Plan: CI
Reviewed By: ajkr
Differential Revision: D35334386
Pulled By: pdillinger
fbshipit-source-id: 2108a42b4575c8cccdfd791c549aae93ec2f3329
Summary:
There's an existing benchmark, "getmergeoperands", but it is unconventional in that it has multiple phases and hardcoded setup parameters.
This PR adds a different one, "readrandomoperands", that follows the pattern of other benchmarks of having a single phase and taking its configuration from existing flags.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9785
Test Plan:
```
$ ./db_bench -benchmarks=mergerandom -merge_operator=StringAppendOperator -write_buffer_size=1048576 -max_bytes_for_level_base=4194304 -target_file_size_base=1048576 -compression_type=none -disable_auto_compactions=true
$ ./db_bench -use_existing_db=true -benchmarks=readrandomoperands -merge_operator=StringAppendOperator -disable_auto_compactions=true -duration=10
...
readrandomoperands : 542.082 micros/op 1844 ops/sec; 0.2 MB/s (11980 of 18999 found)
```
Reviewed By: jay-zhuang
Differential Revision: D35290412
Pulled By: ajkr
fbshipit-source-id: fb367ca614b128cef844a75f0e5d9dd7c3328d85
Summary:
Fixes a bug introduced by me in https://github.com/facebook/rocksdb/pull/9733
That PR added a counter so that the per-thread seeds in ThreadState would
be unique even when --benchmarks had more than one test. But it incorrectly
used this counter as the value for ThreadState::tid as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9757
Test Plan:
Confirm that unexpectedly good QPS results on the regression tests return
to normal with this fix. I have confirmed that the QPS increase starts with
the PR 9733 diff.
Reviewed By: jay-zhuang
Differential Revision: D35149303
Pulled By: mdcallag
fbshipit-source-id: dee5cc36b7faaba6c3be6d6a253d3c2eaad72864
Summary:
This is for https://github.com/facebook/rocksdb/issues/9737
I have wasted more than a few hours running db_bench benchmarks where --seed was not set
and getting better than expected results because cache hit rates are great because
multiple invocations of db_bench used the same value for --seed or did not set it,
and then all used 0. The result is that all see the same sequence of keys.
Others have done the same. The problem is worse in that it is easy to miss and the result is a benchmark with results that are misleading.
A good way to avoid this is to set it to the equivalent of gettimeofday() when either
--seed is not set or it is set to 0 (the default).
With this change the actual seed is printed when it was 0 at process start:
Set seed to 1647992570365606 because --seed was 0
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9740
Test Plan:
Perf results:
./db_bench --benchmarks=fillseq,readrandom --num=1000000 --reads=4000000
readrandom : 6.469 micros/op 154583 ops/sec; 17.1 MB/s (4000000 of 4000000 found)
./db_bench --benchmarks=fillseq,readrandom --num=1000000 --reads=4000000 --seed=0
readrandom : 6.565 micros/op 152321 ops/sec; 16.9 MB/s (4000000 of 4000000 found)
./db_bench --benchmarks=fillseq,readrandom --num=1000000 --reads=4000000 --seed=1
readrandom : 6.461 micros/op 154777 ops/sec; 17.1 MB/s (4000000 of 4000000 found)
./db_bench --benchmarks=fillseq,readrandom --num=1000000 --reads=4000000 --seed=2
readrandom : 6.525 micros/op 153244 ops/sec; 17.0 MB/s (4000000 of 4000000 found)
Reviewed By: jay-zhuang
Differential Revision: D35145361
Pulled By: mdcallag
fbshipit-source-id: 2b35b153ccec46b27d7c9405997523555fc51267
Summary:
This adds the --slow_usecs option with a default value of 1M. Operations that
take this much time have a message printed when --histogram=1, --stats_interval=0
and --stats_interval_seconds=0. The current code hardwired this to 20,000 usecs
and for some stress tests that reduced throughput by 20% or more.
This is for https://github.com/facebook/rocksdb/issues/9620
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9732
Test Plan:
./db_bench --benchmarks=fillrandom,readrandom --compression_type=lz4 --slow_usecs=100 --histogram=1
./db_bench --benchmarks=fillrandom,readrandom --compression_type=lz4 --slow_usecs=100000 --histogram=1
Reviewed By: jay-zhuang
Differential Revision: D35121522
Pulled By: mdcallag
fbshipit-source-id: daf27f937efd748980545d6395db332712fc078b
Summary:
db_bench quietly parses and ignores bad values for --compaction_fadvice and --value_size_distribution_type
I prefer that it fail for them as it does for bad option values in most other cases. Otherwise a benchmark
result will be provided for the wrong configuration and the result will be misleading.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9741
Test Plan:
These now fail:
./db_bench --compaction_fadvice=noney
Unknown compaction fadvice:noney
./db_bench --value_size_distribution_type=norma
Cannot parse distribution type 'norma'
While correct values continue to work:
./db_bench --value_size_distribution_type=normal
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
./db_bench --compaction_fadvice=none
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
Reviewed By: siying
Differential Revision: D35115973
Pulled By: mdcallag
fbshipit-source-id: c2b10de5c2d1ea7c7539e676f5bd556351f5d370
Summary:
When --benchmarks has more than one test then the threads in one benchmark
will use the same set of seeds as the threads in the previous benchmark.
This diff fixe that.
This fixes https://github.com/facebook/rocksdb/issues/9632
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9733
Test Plan:
For this command line the block cache is 8GB, so it caches at most 1024 8KB blocks. Note that without
this diff the second run of readrandom has a much better response time because seed reuse means the
second run reads the same 1000 blocks as the first run and they are cached at that point. But with
this diff that does not happen.
./db_bench --benchmarks=fillseq,flush,compact0,waitforcompaction,levelstats,readrandom,readrandom --compression_type=zlib --num=10000000 --reads=1000 --block_size=8192
...
```
Level Files Size(MB)
--------------------
0 0 0
1 11 238
2 9 253
3 0 0
4 0 0
5 0 0
6 0 0
```
--- perf results without this diff
DB path: [/tmp/rocksdbtest-2260/dbbench]
readrandom : 46.212 micros/op 21618 ops/sec; 2.4 MB/s (1000 of 1000 found)
DB path: [/tmp/rocksdbtest-2260/dbbench]
readrandom : 21.963 micros/op 45450 ops/sec; 5.0 MB/s (1000 of 1000 found)
--- perf results with this diff
DB path: [/tmp/rocksdbtest-2260/dbbench]
readrandom : 47.213 micros/op 21126 ops/sec; 2.3 MB/s (1000 of 1000 found)
DB path: [/tmp/rocksdbtest-2260/dbbench]
readrandom : 42.880 micros/op 23299 ops/sec; 2.6 MB/s (1000 of 1000 found)
Reviewed By: jay-zhuang
Differential Revision: D35089763
Pulled By: mdcallag
fbshipit-source-id: 1b50143a07afe876b8c8e5fa50dd94a8ce57fc6b
Summary:
This changes db_bench to fail at startup for invalid compression types. It had been
changing them to Snappy. For other invalid options it fails at startup.
This is for https://github.com/facebook/rocksdb/issues/9621
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9729
Test Plan:
This continues to work:
./db_bench --benchmarks=fillrandom --compression_type=lz4
This now fails rather than changing the compression type to Snappy
./db_bench --benchmarks=fillrandom --compression_type=lz44
Cannot parse compression type 'lz44'
Reviewed By: jay-zhuang
Differential Revision: D35081323
Pulled By: mdcallag
fbshipit-source-id: 9b38c835abddce11aa7feb235df63f53cf829981
Summary:
…in order
This fixes https://github.com/facebook/rocksdb/issues/9650
For db_bench --benchmarks=fillseq --num_multi_db=X it loads databases in sequence
rather than randomly choosing a database per Put. The benefits are:
1) avoids long delays between flushing memtables
2) avoids flushing memtables for all of them at the same point in time
3) puts same number of keys per database so that query tests will find keys as expected
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9713
Test Plan:
Using db_bench.1 without the change and db_bench.2 with the change:
for i in 1 2; do rm -rf /data/m/rx/* ; time ./db_bench.$i --db=/data/m/rx --benchmarks=fillseq --num_multi_db=4 --num=10000000; du -hs /data/m/rx ; done
--- without the change
fillseq : 3.188 micros/op 313682 ops/sec; 34.7 MB/s
real 2m7.787s
user 1m52.776s
sys 0m46.549s
2.7G /data/m/rx
--- with the change
fillseq : 3.149 micros/op 317563 ops/sec; 35.1 MB/s
real 2m6.196s
user 1m51.482s
sys 0m46.003s
2.7G /data/m/rx
Also, temporarily added a printf to confirm that the code switches to the next database at the right time
ZZ switch to db 1 at 10000000
ZZ switch to db 2 at 20000000
ZZ switch to db 3 at 30000000
for i in 1 2; do rm -rf /data/m/rx/* ; time ./db_bench.$i --db=/data/m/rx --benchmarks=fillseq,readrandom --num_multi_db=4 --num=100000; du -hs /data/m/rx ; done
--- without the change, smaller database, note that not all keys are found by readrandom because databases have < and > --num keys
fillseq : 3.176 micros/op 314805 ops/sec; 34.8 MB/s
readrandom : 1.913 micros/op 522616 ops/sec; 57.7 MB/s (99873 of 100000 found)
--- with the change, smaller database, note that all keys are found by readrandom
fillseq : 3.110 micros/op 321566 ops/sec; 35.6 MB/s
readrandom : 1.714 micros/op 583257 ops/sec; 64.5 MB/s (100000 of 100000 found)
Reviewed By: jay-zhuang
Differential Revision: D35030168
Pulled By: mdcallag
fbshipit-source-id: 2a18c4ec571d954cf5a57b00a11802a3608823ee
Summary:
Changes:
* improves monitoring by displaying average size of a Put value and average scan length
* forces the minimum value size to be 10. Before this it was 0 if you didn't set the distribution parameters.
* uses reasonable defaults for the distribution parameters that determine value size and scan length
* includes seeks in "reads ... found" message, before this they were missing
This is for https://github.com/facebook/rocksdb/issues/9672
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9711
Test Plan:
Before this change:
./db_bench --benchmarks=fillseq,mixgraph --mix_get_ratio=50 --mix_put_ratio=25 --mix_seek_ratio=25 --num=100000 --value_k=0.2615 --value_sigma=25.45 --iter_k=2.517 --iter_sigma=14.236
fillseq : 4.289 micros/op 233138 ops/sec; 25.8 MB/s
mixgraph : 18.461 micros/op 54166 ops/sec; 755.0 MB/s ( Gets:50164 Puts:24919 Seek:24917 of 50164 in 75081 found)
After this change:
./db_bench --benchmarks=fillseq,mixgraph --mix_get_ratio=50 --mix_put_ratio=25 --mix_seek_ratio=25 --num=100000 --value_k=0.2615 --value_sigma=25.45 --iter_k=2.517 --iter_sigma=14.236
fillseq : 3.974 micros/op 251553 ops/sec; 27.8 MB/s
mixgraph : 16.722 micros/op 59795 ops/sec; 833.5 MB/s ( Gets:50164 Puts:24919 Seek:24917, reads 75081 in 75081 found, avg size: 36.0 value, 504.9 scan)
Reviewed By: jay-zhuang
Differential Revision: D35030190
Pulled By: mdcallag
fbshipit-source-id: d8f555f28d869f752ddb674a524108884511b151
Summary:
The goal of this change is to allow changes to the "current" (in
FileSystem) file temperatures to feed back into DB metadata, so that
they can inform decisions and stats reporting. In part because of
modular code factoring, it doesn't seem easy to do this automagically,
where opening an SST file and observing current Temperature different
from expected would trigger a change in metadata and DB manifest write
(essentially giving the deep read path access to the write path). It is also
difficult to do this while the DB is open because of the limitations of
LogAndApply.
This change allows updating file temperature metadata on a closed DB
using an experimental utility function UpdateManifestForFilesState()
or `ldb update_manifest --update_temperatures`. This should suffice for
"migration" scenarios where outside tooling has placed or re-arranged DB
files into a (different) tiered configuration without going through
RocksDB itself (currently, only compaction can change temperature
metadata).
Some details:
* Refactored and added unit test for `ldb unsafe_remove_sst_file` because
of shared functionality
* Pulled in autovector.h changes from https://github.com/facebook/rocksdb/issues/9546 to fix SuperVersionContext
move constructor (related to an older draft of this change)
Possible follow-up work:
* Support updating manifest with file checksums, such as when a
new checksum function is used and want existing DB metadata updated
for it.
* It's possible that for some repair scenarios, lighter weight than
full repair, we might want to support UpdateManifestForFilesState() to
modify critical file details like size or checksum using same
algorithm. But let's make sure these are differentiated from modifying
file details in ways that don't suspect corruption (or require extreme
trust).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9683
Test Plan: unit tests added
Reviewed By: jay-zhuang
Differential Revision: D34798828
Pulled By: pdillinger
fbshipit-source-id: cfd83e8fb10761d8c9e7f9c020d68c9106a95554
Summary:
The primary goal of this change is to add support for backing up and
restoring (applying on restore) file temperature metadata, without
committing to either the DB manifest or the FS reported "current"
temperatures being exclusive "source of truth".
To achieve this goal, we need to add temperature information to backup
metadata, which requires updated backup meta schema. Fortunately I
prepared for this in https://github.com/facebook/rocksdb/issues/8069, which began forward compatibility in version
6.19.0 for this kind of schema update. (Previously, backup meta schema
was not extensible! Making this schema update public will allow some
other "nice to have" features like taking backups with hard links, and
avoiding crc32c checksum computation when another checksum is already
available.) While schema version 2 is newly public, the default schema
version is still 1. Until we change the default, users will need to set
to 2 to enable features like temperature data backup+restore. New
metadata like temperature information will be ignored with a warning
in versions before this change and since 6.19.0. The metadata is
considered ignorable because a functioning DB can be restored without
it.
Some detail:
* Some renaming because "future schema" is now just public schema 2.
* Initialize some atomics in TestFs (linter reported)
* Add temperature hint support to SstFileDumper (used by BackupEngine)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9660
Test Plan:
related unit test majorly updated for the new functionality,
including some shared testing support for tracking temperatures in a FS.
Some other tests and testing hooks into production code also updated for
making the backup meta schema change public.
Reviewed By: ajkr
Differential Revision: D34686968
Pulled By: pdillinger
fbshipit-source-id: 3ac1fa3e67ee97ca8a5103d79cc87d872c1d862a
