Summary:
AddDBStats is in two steps of load and store, which is more efficient than fetch_add. This is however not thread-safe. Currently we have to protect concurrent access to AddDBStats with a mutex which is less efficient that fetch_add.
This patch adds the option to do fetch_add when AddDBStats. The results for my 2pc benchmark on sysbench is:
- vanilla: 68618 tps
- removing mutex on AddDBStats (unsafe): 69767 tps
- fetch_add for all AddDBStats: 69200 tps
- fetch_add only for concurrently access AddDBStats (this patch): 69579 tps
Closes https://github.com/facebook/rocksdb/pull/2505
Differential Revision: D5330656
Pulled By: maysamyabandeh
fbshipit-source-id: af64d7bee135b0e86b4fac323a4f9d9113eaa383
Summary:
Throughput: 46k tps in our sysbench settings (filling the details later)
The idea is to have the simplest change that gives us a reasonable boost
in 2PC throughput.
Major design changes:
1. The WAL file internal buffer is not flushed after each write. Instead
it is flushed before critical operations (WAL copy via fs) or when
FlushWAL is called by MySQL. Flushing the WAL buffer is also protected
via mutex_.
2. Use two sequence numbers: last seq, and last seq for write. Last seq
is the last visible sequence number for reads. Last seq for write is the
next sequence number that should be used to write to WAL/memtable. This
allows to have a memtable write be in parallel to WAL writes.
3. BatchGroup is not used for writes. This means that we can have
parallel writers which changes a major assumption in the code base. To
accommodate for that i) allow only 1 WriteImpl that intends to write to
memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes
come via group commit phase which is serial anyway, ii) make all the
parts in the code base that assumed to be the only writer (via
EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are
protected via a stat_mutex_.
Note: the first commit has the approach figured out but is not clean.
Submitting the PR anyway to get the early feedback on the approach. If
we are ok with the approach I will go ahead with this updates:
0) Rebase with Yi's pipelining changes
1) Currently batching is disabled by default to make sure that it will be
consistent with all unit tests. Will make this optional via a config.
2) A couple of unit tests are disabled. They need to be updated with the
serial commit of 2PC taken into account.
3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires
releasing mutex_ beforehand (the same way EnterUnbatched does). This
needs to be cleaned up.
Closes https://github.com/facebook/rocksdb/pull/2345
Differential Revision: D5210732
Pulled By: maysamyabandeh
fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
Summary:
Some users want to prevent rocksdb from entering read-only mode in certain error cases. This diff gives them a callback, `OnBackgroundError`, that they can use to achieve it.
- call `OnBackgroundError` every time we consider setting `bg_error_`. Use its result to assign `bg_error_` but not to change the function's return status.
- classified calls using `BackgroundErrorReason` to give the callback some info about where the error happened
- renamed `ParanoidCheck` to something more specific so we can provide a clear `BackgroundErrorReason`
- unit tests for the most common cases: flush or compaction errors
Closes https://github.com/facebook/rocksdb/pull/2477
Differential Revision: D5300190
Pulled By: ajkr
fbshipit-source-id: a0ea4564249719b83428e3f4c6ca2c49e366e9b3
Summary:
If ReadOptions.low_pri=true and compaction is behind, the write will either return immediate or be slowed down based on ReadOptions.no_slowdown.
Closes https://github.com/facebook/rocksdb/pull/2369
Differential Revision: D5127619
Pulled By: siying
fbshipit-source-id: d30e1cff515890af0eff32dfb869d2e4c9545eb0
Summary:
- `max_background_flushes` and `max_background_compactions` are still supported for backwards compatibility
- `base_background_compactions` is completely deprecated. Now we just throttle to one background compaction when there's no pressure.
- `max_background_jobs` is added to automatically partition the concurrent background jobs into flushes vs compactions. Currently it's very simple as we just allocate one-fourth of the jobs to flushes, and the remaining can be used for compactions.
- The test cases that set `base_background_compactions > 1` needed to be updated. I just grab the pressure token such that the desired number of compactions can be scheduled.
Closes https://github.com/facebook/rocksdb/pull/2205
Differential Revision: D4937461
Pulled By: ajkr
fbshipit-source-id: df52cbbd497e13bbc9a60560a5ac2a2526b3f1f9
Summary:
PipelineWriteImpl is an alternative approach to WriteImpl. In WriteImpl, only one thread is allow to write at the same time. This thread will do both WAL and memtable writes for all write threads in the write group. Pending writers wait in queue until the current writer finishes. In the pipeline write approach, two queue is maintained: one WAL writer queue and one memtable writer queue. All writers (regardless of whether they need to write WAL) will still need to first join the WAL writer queue, and after the house keeping work and WAL writing, they will need to join memtable writer queue if needed. The benefit of this approach is that
1. Writers without memtable writes (e.g. the prepare phase of two phase commit) can exit write thread once WAL write is finish. They don't need to wait for memtable writes in case of group commit.
2. Pending writers only need to wait for previous WAL writer finish to be able to join the write thread, instead of wait also for previous memtable writes.
Merging #2056 and #2058 into this PR.
Closes https://github.com/facebook/rocksdb/pull/2286
Differential Revision: D5054606
Pulled By: yiwu-arbug
fbshipit-source-id: ee5b11efd19d3e39d6b7210937b11cefdd4d1c8d
Summary:
Adding DB::CreateColumnFamilie() and DB::DropColumnFamilies() to bulk create/drop column families. This is to address the problem creating/dropping 1k column families takes minutes. The bottleneck is we persist options files for every single column family create/drop, and it parses the persisted options file for verification, which take a lot CPU time.
The new APIs simply create/drop column families individually, and persist options file once at the end. This improves create 1k column families to within ~0.1s. Further improvement can be merge manifest write to one IO.
Closes https://github.com/facebook/rocksdb/pull/2248
Differential Revision: D5001578
Pulled By: yiwu-arbug
fbshipit-source-id: d4e00bda671451e0b314c13e12ad194b1704aa03
Summary:
Add a function to allow users to reset internal stats without restarting the DB.
Closes https://github.com/facebook/rocksdb/pull/2167
Differential Revision: D4907939
Pulled By: siying
fbshipit-source-id: ab2dd85b88aabe9380da7485320a1d460d3e1f68
Summary:
The concept about early exit in write thread implementation is a confusing one. It means that if early exit is allowed, batch group leader will not responsible to exit the batch group, but the last finished writer do. In case we need to mark log synced, or encounter memtable insert error, early exit is disallowed.
This patch remove such a concept by:
* In all cases, the last finished writer (not necessary leader) is responsible to exit batch group.
* In case of parallel memtable write, leader will also mark log synced after memtable insert and before signal finish (call `CompleteParallelWorker()`). The purpose is to allow mark log synced (which require locking mutex) can run in parallel to memtable insert in other writers.
* The last finish writer should handle memtable insert error (update bg_error_) before exiting batch group.
Closes https://github.com/facebook/rocksdb/pull/2134
Differential Revision: D4869667
Pulled By: yiwu-arbug
fbshipit-source-id: aec170847c85b90f4179d6a4608a4fe1361544e3
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
Summary:
db_impl.cc is too large to manage. Divide db_impl.cc into db/db_impl.cc, db/db_impl_compaction_flush.cc, db/db_impl_files.cc, db/db_impl_open.cc and db/db_impl_write.cc.
Closes https://github.com/facebook/rocksdb/pull/2095
Differential Revision: D4838188
Pulled By: siying
fbshipit-source-id: c5f3059
Summary:
Refactor WriteImpl() so when I plug-in the pipeline write code (which is
an alternative approach for WriteThread), some of the logic can be
reuse. I split out the following methods from WriteImpl():
* PreprocessWrite()
* HandleWALFull() (previous MaybeFlushColumnFamilies())
* HandleWriteBufferFull()
* WriteToWAL()
Also adding a constructor to WriteThread::Writer, and move WriteContext into db_impl.h.
No real logic change in this patch.
Closes https://github.com/facebook/rocksdb/pull/2042
Differential Revision: D4781014
Pulled By: yiwu-arbug
fbshipit-source-id: d45ca18
Summary:
Add two DB properties: rocksdb.actual_delayed_write_rate and rocksdb.is_write_stooped, for people to know whether current writes are being throttled.
Closes https://github.com/facebook/rocksdb/pull/2043
Differential Revision: D4782975
Pulled By: siying
fbshipit-source-id: 6b2f5cf
Summary:
PinnableSlice
Summary:
Currently the point lookup values are copied to a string provided by the
user. This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.
Here is the summary for improvements:
value 100 byte: 1.8% regular, 1.2% merge values
value 1k byte: 11.5% regular, 7.5% merge values
value 10k byte: 26% regular, 29.9% merge values
The improvement for merge could be more if we extend this approach to
pin the merge output and delay the full merge operation until the user
actually needs it. We have put that for future work.
PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The d
Closes https://github.com/facebook/rocksdb/pull/1756
Differential Revision: D4391738
Pulled By: maysamyabandeh
fbshipit-source-id: 6f3edd3
Summary:
Seems to me `has_unpersisted_data_` is read from read thread and write
from write thread concurrently without synchronization. Making it an
atomic.
I update the logic not because seeing any problem with it, but it just
feel confusing.
Closes https://github.com/facebook/rocksdb/pull/1869
Differential Revision: D4555837
Pulled By: yiwu-arbug
fbshipit-source-id: eff2ab8
Summary:
Added method that returns approx num of entries as well as size for memtables.
Closes https://github.com/facebook/rocksdb/pull/1841
Differential Revision: D4511990
Pulled By: VitaliyLi
fbshipit-source-id: 9a4576e
Summary:
GetAndRefSuperVersionUnlocked
ReturnAndCleanupSuperVersionUnlocked
GetColumnFamilyHandleUnlocked
Are dead code that are not used any where
Closes https://github.com/facebook/rocksdb/pull/1802
Differential Revision: D4459948
Pulled By: IslamAbdelRahman
fbshipit-source-id: 30fa89d
Summary:
Added an option to GetApproximateSizes to exclude file stats, as MyRocks has those counted exactly and we need only stats from memtables.
Closes https://github.com/facebook/rocksdb/pull/1787
Differential Revision: D4441111
Pulled By: IslamAbdelRahman
fbshipit-source-id: c11f4c3
Summary:
Consider the following single column family scenario:
prepare in log A
commit in log B
*WAL is too large, flush all CFs to releast log A*
*CFA is on log B so we do not see CFA is depending on log A so no flush is requested*
To fix this we must also consider the log containing the prepare section when determining what log a CF is dependent on.
Closes https://github.com/facebook/rocksdb/pull/1768
Differential Revision: D4403265
Pulled By: reidHoruff
fbshipit-source-id: ce800ff
Summary:
Currently the point lookup values are copied to a string provided by the user.
This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.
Here is the summary for improvements:
1. value 100 byte: 1.8% regular, 1.2% merge values
2. value 1k byte: 11.5% regular, 7.5% merge values
3. value 10k byte: 26% regular, 29.9% merge values
The improvement for merge could be more if we extend this approach to
pin the merge output and delay the full merge operation until the user
actually needs it. We have put that for future work.
PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The difference
is a little and could be noise. More importantly it is safely
cancelled
Closes https://github.com/facebook/rocksdb/pull/1732
Differential Revision: D4374613
Pulled By: maysamyabandeh
fbshipit-source-id: a077f1a
Summary:
If 2PC is enabled, checkpoint may not copy previous log files that contain uncommitted prepare records. In this diff we keep those files.
Closes https://github.com/facebook/rocksdb/pull/1724
Differential Revision: D4368319
Pulled By: siying
fbshipit-source-id: cc2c746
Summary:
Made delete_obsolete_files_period_micros option dynamic. It can be updating using DB::SetDBOptions().
Closes https://github.com/facebook/rocksdb/pull/1595
Differential Revision: D4246569
Pulled By: tonek
fbshipit-source-id: d23f560
Summary:
If the WriteOptions.no_slowdown flag is set AND we need to wait or sleep for
the write request, then fail immediately with Status::Incomplete().
Closes https://github.com/facebook/rocksdb/pull/1527
Differential Revision: D4191405
Pulled By: maysamyabandeh
fbshipit-source-id: 7f3ce3f
Summary:
Currently the compaction stats are printed to stdout. We want to export the compaction stats in a map format so that the upper layer apps (e.g., MySQL) could present
the stats in any format required by the them.
Closes https://github.com/facebook/rocksdb/pull/1477
Differential Revision: D4149836
Pulled By: maysamyabandeh
fbshipit-source-id: b3df19f
Summary:
Note: reviewed in https://reviews.facebook.net/D65115
- DBIter maintains a range tombstone accumulator. We don't cleanup obsolete tombstones yet, so if the user seeks back and forth, the same tombstones would be added to the accumulator multiple times.
- DBImpl::NewInternalIterator() (used to make DBIter's underlying iterator) adds memtable/L0 range tombstones, L1+ range tombstones are added on-demand during NewSecondaryIterator() (see D62205)
- DBIter uses ShouldDelete() when advancing to check whether keys are covered by range tombstones
Closes https://github.com/facebook/rocksdb/pull/1464
Differential Revision: D4131753
Pulled By: ajkr
fbshipit-source-id: be86559
Summary:
change ioptions.comparator to user_comparator instread of internal_comparator.
Also change Comparator* to InternalKeyComparator* to make its type explicitly.
Test Plan: make all check -j64
Reviewers: andrewkr, sdong, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D65121
Summary:
Changes in the diff
API changes:
- Introduce IngestExternalFile to replace AddFile (I think this make the API more clear)
- Introduce IngestExternalFileOptions (This struct will encapsulate the options for ingesting the external file)
- Deprecate AddFile() API
Logic changes:
- If our file overlap with the memtable we will flush the memtable
- We will find the first level in the LSM tree that our file key range overlap with the keys in it
- We will find the lowest level in the LSM tree above the the level we found in step 2 that our file can fit in and ingest our file in it
- We will assign a global sequence number to our new file
- Remove AddFile restrictions by using global sequence numbers
Other changes:
- Refactor all AddFile logic to be encapsulated in ExternalSstFileIngestionJob
Test Plan:
unit tests (still need to add more)
addfile_stress (https://reviews.facebook.net/D65037)
Reviewers: yiwu, andrewkr, lightmark, yhchiang, sdong
Reviewed By: sdong
Subscribers: jkedgar, hcz, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65061
Summary:
MyRocks hit a regression, @mung generated perf reports showing that the reason is the cost of calling `GetDBOptions()` inside `GetFromBatchAndDB()`
This diff avoid calling `GetDBOptions` and use the `ImmutableDBOptions` instead
Test Plan: make check -j64
Reviewers: sdong, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba, mung
Differential Revision: https://reviews.facebook.net/D65151
Summary:
Issue scenario:
(1) We have 3 files in L1 and we issue a compaction that will compact them into 1 file in L2
(2) While compaction (1) is running, we flush a file into L0 and trigger another compaction that decide to move this file to L1 and then move it again to L2 (this file don't overlap with any other files)
(3) compaction (1) finishes and install the file it generated in L2, but this file overlap with the file we generated in (2) so we break the LSM consistency
Looks like this issue can be triggered by using non-exclusive manual compaction or AddFile()
Test Plan: unit tests
Reviewers: sdong
Reviewed By: sdong
Subscribers: hermanlee4, jkedgar, andrewkr, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D64947
Summary:
Fix the conflict bug between AddFile() and CompactRange() by
- Make sure that no AddFile calls are running when asking CompactionPicker to pick compaction for manual compaction
- If AddFile() run after we pick the compaction for the manual compaction it will be aware of it since we will add the manual compaction to running_compactions_ after picking it
This will solve these 2 scenarios
- If AddFile() is running, we will wait for it to finish before we pick a compaction for the manual compaction
- If we already picked a manual compaction and then AddFile() started ... we ensure that it never ingest a file in a level that will overlap with the manual compaction
Test Plan: unit tests
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, yoshinorim, jkedgar, dhruba
Differential Revision: https://reviews.facebook.net/D64449
Summary:
Since AddFile unlock/lock the mutex inside LogAndApply() we need to ensure that during this period other compactions cannot run since such compactions are not aware of the file we are ingesting and could create a compaction that overlap wit this file
this diff add
- WaitForAddFile() call that will ensure that no AddFile() calls are being processed right now
- Call `WaitForAddFile()` in 3 locations
-- When doing manual Compaction
-- When starting automatic Compaction
-- When doing CompactFiles()
Test Plan: unit test
Reviewers: lightmark, yiwu, andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, yoshinorim, jkedgar, dhruba
Differential Revision: https://reviews.facebook.net/D64383
Summary: Use ImmutableDBOptions/MutableDBOptions internally and DBOptions only for user-facing APIs. MutableDBOptions is barely a placeholder for now. I'll start to move options to MutableDBOptions in following diffs.
Test Plan:
make all check
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64065
Summary:
Revert the behavior where we don't read sequence id from WAL, but increase it as we replay the log. We still keep the behave for 2PC for now but will fix later.
This change fixes github issue 1339, where some writes come with WAL disabled and we may recover records with wrong sequence id.
Test Plan: Added unit test.
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D64275
Summary: WritableFile::SetPreallocationBlockSize() requires parameter as size_t, and options used in DBImpl::GetWalPreallocateBlockSize() are all size_t. WritableFile::SetPreallocationBlockSize() should return size_t to avoid build break if size_t is not uint64_t.
Test Plan: Run existing tests.
Reviewers: andrewkr, IslamAbdelRahman, yiwu
Reviewed By: yiwu
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D64137
Summary: Currently the WAL file preallocation size is 1.1 * write_buffer_size. This, however, will be over-estimated if options.db_write_buffer_size or options.max_total_wal_size is set and is much smaller.
Test Plan: Add a unit test.
Reviewers: andrewkr, yiwu
Reviewed By: yiwu
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63957
Summary: As title, make sure Prev() works as expected with Next() when the current iter->key() in the range of the same prefix in prefix seek mode
Test Plan: make all check -j64 (add prefix_test with PrefixSeekModePrev test case)
Reviewers: andrewkr, sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yoshinorim, andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61419
Summary: 1. Range Deletion Tombstone structure 2. Modify Add() in table_builder to make it usable for adding range del tombstones 3. Expose NewTombstoneIterator() API in table_reader
Test Plan: table_test.cc (now BlockBasedTableBuilder::Add() only accepts InternalKey. I make table_test only pass InternalKey to BlockBasedTableBuidler. Also test writing/reading range deletion tombstones in table_test )
Reviewers: sdong, IslamAbdelRahman, lightmark, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61473
Summary: With read_options.background_purge_on_iterator_cleanup=true, File deletion and closing can still happen in forward iterator, or WAL file closing. Cover those cases too.
Test Plan: I am adding unit tests.
Reviewers: andrewkr, IslamAbdelRahman, yiwu
Reviewed By: yiwu
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61503
* Added check_snapshot option in the DB's AddFile function
* change check_snapshot to skip_snapshot_check
* add unit test for skip_snapshot_check
* Add skip_snapshot_check comment
Summary:
My understanding is that the purpose of write stall triggers are to wait for auto-compaction to catch up. Without auto-compaction, we don't need to stall writes.
Also with this diff, flush/compaction conditions are recalculated on dynamic option change. Previously the conditions are recalculate only when write stall options are changed.
Test Plan: See the new test. Removed two tests that are no longer valid.
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61437
Summary: Multiput atomiciy is broken across multiple column families if we don't sync WAL before flushing one column family. The WAL file may contain a write batch containing writes to a key to the CF to be flushed and a key to other CF. If we don't sync WAL before flushing, if machine crashes after flushing, the write batch will only be partial recovered. Data to other CFs are lost.
Test Plan: Add a new unit test which will fail without the diff.
Reviewers: yhchiang, IslamAbdelRahman, igor, yiwu
Reviewed By: yiwu
Subscribers: yiwu, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60915
Summary:
When write stalls because of auto compaction is disabled, or stop write trigger is reached,
user may change these two options to unblock writes. Unfortunately we had issue where the write
thread will block the attempt to persist the options, thus creating a deadlock. This diff
fix the issue and add two test cases to detect such deadlock.
Test Plan:
Run unit tests.
Also, revert db_impl.cc to master (but don't revert `DBImpl::BackgroundCompaction:Finish` sync point) and run db_options_test. Both tests should hit deadlock.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60627
Summary:
DB::AddFile(std::string file_path) API that allow them to ingest an SST file created using SstFileWriter
We want to update this interface to be able to accept a list of files that will be ingested, DB::AddFile(std::vector<std::string> file_path_list).
Test Plan:
Add test case `AddExternalSstFileList` in `DBSSTTest`. To make sure:
1. files key ranges are not overlapping with each other
2. each file key range dont overlap with the DB key range
3. make sure no snapshots are held
Reviewers: andrewkr, sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D58587
Summary: We saw instances where total_log_size is off the real value, but I'm not able to reproduce it. Add more logging to help debugging when it happens again.
Test Plan: Run the unit test and see the logging.
Reviewers: andrewkr, yhchiang, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60081
Summary: Add option write_buffer_manager to help users control total memory spent on memtables across multiple DB instances.
Test Plan: Add a new unit test.
Reviewers: yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: adela, benj, sumeet, muthu, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59925
Summary:
To support column families, it is easiest to use VersionSet to manage
our column families (if we don't have Versions then ColumnFamilyData always
behaves as a dummy column family). This diff only refactors the existing repair
logic to use VersionSet; the next two parts will add support for multiple
column families.
Test Plan:
$ ./repair_test
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59775
Summary:
Add a read option `background_purge_on_iterator_cleanup` to avoid deleting files in foreground when destroying iterators.
Instead, a job is scheduled in high priority queue and would be executed in a separate background thread.
Test Plan: Add a variant of PurgeObsoleteFileTest. Turn on background purge option in the new test, and use sleeping task to ensure files are deleted in background.
Reviewers: IslamAbdelRahman, sdong
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59499
Summary:
DB::AddFile() right now always add the ingested file to L0
update the logic to add the file to the lowest possible level
Test Plan: unit tests
Reviewers: jkedgar, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D59637
Summary: Backup options file to private directory
Test Plan:
backupable_db_test.cc, BackupOptions
Modify DB options by calling OpenDB for 3 times. Check the latest options file is in the right place. Also check no redundent files are backuped.
Reviewers: andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D59373
* Create a callback for memtable becoming immutable
Create a callback for memtable becoming immutable
Create a callback for memtable becoming immutable
moved notification outside the lock
Move sealed notification to unlocked portion of SwitchMemtable
* fix lite build
Summary: This tests that a prepared transaction is not lost after several crashes, restarts, and memtable flushes.
Test Plan: TwoPhaseLongPrepareTest
Reviewers: sdong
Subscribers: hermanlee4, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58185
Summary:
This diff is built on top of WriteBatch modification: https://reviews.facebook.net/D54093 and adds the required functionality to rocksdb core necessary for rocksdb to support 2PC.
modfication of DBImpl::WriteImpl()
- added two arguments *uint64_t log_used = nullptr, uint64_t log_ref = 0;
- *log_used is an output argument which will return the log number which the incoming batch was inserted into, 0 if no WAL insert took place.
- log_ref is a supplied log_number which all memtables inserted into will reference after the batch insert takes place. This number will reside in 'FindMinPrepLogReferencedByMemTable()' until all Memtables insertinto have flushed.
- Recovery/writepath is now aware of prepared batches and commit and rollback markers.
Test Plan: There is currently no test on this diff. All testing of this functionality takes place in the Transaction layer/diff but I will add some testing.
Reviewers: IslamAbdelRahman, sdong
Subscribers: leveldb, santoshb, andrewkr, vasilep, dhruba, hermanlee4
Differential Revision: https://reviews.facebook.net/D56919
Summary: CompactedDB skips memtable. So we shouldn't use compacted DB if there is outstanding WAL files.
Test Plan: Change to options.max_open_files = -1 perf context test to create a compacted DB, which we shouldn't do.
Reviewers: yhchiang, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57057
Summary:
In https://reviews.facebook.net/D56271, we fixed an issue where
we consider flush as compaction. However, that makes us mistakenly
count FLUSH_WRITE_BYTES twice (one in flush_job and one in db_impl.)
This patch removes the one incremented in db_impl.
Test Plan: db_test
Reviewers: yiwu, andrewkr, IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57111
Summary:
Currently, when rocksdb tries to run manual compaction to refit data into a level,
there's a ReFitLevel() process that requires no bg work is currently running.
When RocksDB plans to ReFitLevel(), it will do the following:
1. pause scheduling new bg work.
2. wait until all bg work finished
3. do the ReFitLevel()
4. unpause scheduling new bg work.
However, as it pause scheduling new bg work at step one and waiting for all bg work
finished in step 2, RocksDB will stop flushing until all bg work is done (which
could take a long time.)
This patch fix this issue by changing the way ReFitLevel() pause the background work:
1. pause scheduling compaction.
2. wait until all bg work finished.
3. pause scheduling flush
4. do ReFitLevel()
5. unpause both flush and compaction.
The major difference is that. We only pause scheduling compaction in step 1 and wait
for all bg work finished in step 2. This prevent flush being blocked for a long time.
Although there's a very rare case that ReFitLevel() might be in starvation in step 2,
but it's less likely the case as flush typically finish very fast.
Test Plan: existing test.
Reviewers: anthony, IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55029
Summary:
The call to
```
CaptureCurrentFileNumberInPendingOutputs()
```
should be before
```
versions_->NewFileNumber()
```
Right now we are not actually protecting the file from being deleted
Test Plan: make check
Reviewers: sdong, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D54645
Summary:
Add kSstFileTier to ReadTier, which allows Get and MultiGet to
read only directly from SST files and skip mem-tables.
kSstFileTier = 0x2 // data in SST files.
// Note that this ReadTier currently only supports
// Get and MultiGet and does not support iterators.
Test Plan: add new test in db_test.
Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: igor, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53511
Summary:
Before this diff, there were duplicated constants to refer to properties (user-
facing API had strings and InternalStats had an enum). I noticed these were
inconsistent in terms of which constants are provided, names of constants, and
documentation of constants. Overall it seemed annoying/error-prone to maintain
these duplicated constants.
So, this diff gets rid of InternalStats's constants and replaces them with a map
keyed on the user-facing constant. The value in that map contains a function
pointer to get the property value, so we don't need to do string matching while
holding db->mutex_. This approach has a side benefit of making many small
handler functions rather than a giant switch-statement.
Test Plan: db_properties_test passes, running "make commit-prereq -j32"
Reviewers: sdong, yhchiang, kradhakrishnan, IslamAbdelRahman, rven, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53253
Summary:
If options.base_background_compactions is given, we try to schedule number of compactions not existing this number, only when L0 files increase to certain number, or pending compaction bytes more than certain threshold, we schedule compactions based on options.max_background_compactions.
The watermarks are calculated based on slowdown thresholds.
Test Plan:
Add new test cases in column_family_test.
Adding more unit tests.
Reviewers: IslamAbdelRahman, yhchiang, kradhakrishnan, rven, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D53409
Summary:
This is an initial diff for providing the ability to delete
files which are completely within a given range of keys.
Test Plan: DBCompactionTest.DeleteRange
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52293
Summary: It's usually hard for users to set a value of options.delayed_write_rate. With this diff, after slowdown condition triggers, we greedily reduce write rate if estimated pending compaction bytes increase. If estimated compaction pending bytes drop, we increase the write rate.
Test Plan:
Add a unit test
Test with db_bench setting:
TEST_TMPDIR=/dev/shm/ ./db_bench --benchmarks=fillrandom -num=10000000 --soft_pending_compaction_bytes_limit=1000000000 --hard_pending_compaction_bytes_limit=3000000000 --delayed_write_rate=100000000
and make sure without the commit, write stop will happen, but with the commit, it will not happen.
Reviewers: igor, anthony, rven, yhchiang, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52131
Summary:
When there are waiting manual compactions, we need to signal
them after removing the current manual compaction from the deque.
Test Plan: ColumnFamilytTest.SameCFManualManualCommaction
Reviewers: anthony, IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D52119
Summary:
This diff provides a framework for doing manual
compactions in parallel with other compactions. We now have a deque of manual compactions. We also pass manual compactions as an argument from RunManualCompactions down to
BackgroundCompactions, so that RunManualCompactions can be reentrant.
Parallelism is controlled by the two routines
ConflictingManualCompaction to allow/disallow new parallel/manual
compactions based on already existing ManualCompactions. In this diff, by default manual compactions still have to run exclusive of other compactions. However, by setting the compaction option, exclusive_manual_compaction to false, it is possible to run other compactions in parallel with a manual compaction. However, we are still restricted to one manual compaction per column family at a time. All of these restrictions will be relaxed in future diffs.
I will be adding more tests later.
Test Plan: Rocksdb regression + new tests + valgrind
Reviewers: igor, anthony, IslamAbdelRahman, kradhakrishnan, yhchiang, sdong
Reviewed By: sdong
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47973
Summary:
Currently, transactions can fail even if there is no actual write conflict. This is due to relying on only the memtables to check for write-conflicts. Users have to tune memtable settings to try to avoid this, but it's hard to figure out exactly how to tune these settings.
With this diff, TransactionDB will use both memtables and SST files to determine if there are any write conflicts. This relies on the fact that BlockBasedTable stores sequence numbers for all writes that happen after any open snapshot. Also, D50295 is needed to prevent SingleDelete from disappearing writes (the TODOs in this test code will be fixed once the other diff is approved and merged).
Note that Optimistic transactions will still rely on tuning memtable settings as we do not want to read from SST while on the write thread. Also, memtable settings can still be used to reduce how often TransactionDB needs to read SST files.
Test Plan: unit tests, db bench
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb, yoshinorim
Differential Revision: https://reviews.facebook.net/D50475
Summary:
This patch fix a race condition in persisting options which will cause a crash when:
* Thread A obtain cf options and start to persist options based on that cf options.
* Thread B kicks in and finish DropColumnFamily and delete cf_handle.
* Thread A wakes up and tries to finish the persisting options and crashes.
Test Plan: Add a test in column_family_test that can reproduce the crash
Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51717
Summary:
D51183 was reverted due to breaking the LITE build.
This diff is the same as D51183 but with a fix for the LITE BUILD(D51693)
Test Plan: run all unit tests
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51711
Summary:
D50475 enables using SST files for transaction write-conflict checking. In order for this to work, we need to make sure not to compact out SingleDeletes when there is an earlier transaction snapshot(D50295). If there is a long-held snapshot, this could reduce the benefit of the SingleDelete optimization.
This diff allows Transactions to mark snapshots as being used for write-conflict checking. Then, during compaction, we will be able to optimize SingleDeletes better in the future.
This diff adds a flag to SnapshotImpl which is used by Transactions. This diff also passes the earliest write-conflict snapshot's sequence number to CompactionIterator. This diff does not actually change Compaction (after this diff is pushed, D50295 will be able to use this information).
Test Plan: no behavior change, ran existing tests
Reviewers: rven, kradhakrishnan, yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51183
Summary:
This patch fix a race condition in persisting options which will cause a crash when:
* Thread A obtain cf options and start to persist options based on that cf options.
* Thread B kicks in and finish DropColumnFamily and delete cf_handle.
* Thread A wakes up and tries to finish the persisting options and crashes.
Test Plan: Add a test in column_family_test that can reproduce the crash
Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51609
Summary:
Fixes T8781168.
Added a new function EnableAutoCompactions in db.h to be publicly
avialable. This allows compaction to be re-enabled after disabling it via
SetOptions
Refactored code to set the dbptr earlier on in TransactionDB::Open and DB::Open
Temporarily disable auto_compaction in TransactionDB::Open until dbptr is set to
prevent race condition.
Test Plan:
Ran make all check
verified fix on myrocks side:
was able to reproduce the seg fault with
../tools/mysqltest.sh --mem --force rocksdb.drop_table
method was to manually sleep the thread after DB::Open but before TransactionDB ptr was
assigned in transaction_db_impl.cc:
DB::Open(db_options, dbname, column_families_copy, handles, &db);
clock_t goal = (60000 * 10) + clock();
while (goal > clock());
...dbptr(aka rdb) gets assigned below
verified my changes fixed the issue.
Also added unit test 'ToggleAutoCompaction' in transaction_test.cc
Reviewers: hermanlee4, anthony
Reviewed By: anthony
Subscribers: alex, dhruba
Differential Revision: https://reviews.facebook.net/D51147
Summary: DBTest.DynamicCompactionOptions sometimes fails the assert but I can't repro it locally. Make it more deterministic and readable and see whether the problem is still there.
Test Plan: Run tht test and make sure it passes
Reviewers: kradhakrishnan, yhchiang, igor, rven, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51309
Summary:
This patch allows rocksdb to persist options into a file on
DB::Open, SetOptions, and Create / Drop ColumnFamily.
Options files are created under the same directory as the rocksdb
instance.
In addition, this patch also adds a fail_if_missing_options_file in DBOptions
that makes any function call return non-ok status when it is not able to
persist options properly.
// If true, then DB::Open / CreateColumnFamily / DropColumnFamily
// / SetOptions will fail if options file is not detected or properly
// persisted.
//
// DEFAULT: false
bool fail_if_missing_options_file;
Options file names are formatted as OPTIONS-<number>, and RocksDB
will always keep the latest two options files.
Test Plan:
Add options_file_test.
options_test
column_family_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48285
Summary:
This patch introduces utilities/memory, which currently includes
GetApproximateMemoryUsageByType that reports different types of
rocksdb memory usage given a list of input DBs.
The API also take care of the case where Cache could be shared
across multiple column families / multiple db instances.
Currently, it reports memory usage of memtable, table-readers
and cache.
Test Plan: utilities/memory/memory_test.cc
Reviewers: igor, anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49257
Summary:
This patch adds GetAggregatedIntProperty() that returns the aggregated
value from all CFs
Test Plan: Added a test in db_test
Reviewers: igor, sdong, anthony, IslamAbdelRahman, rven
Reviewed By: rven
Subscribers: rven, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49497
Summary: As above.
Test Plan: USE_CLANG=1 make check -j
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48981
If log recycling is enabled, put old WAL files on a recycle queue instead of
deleting them. When we need a new log file, take a recycled file off the
list if one is available.
Signed-off-by: Sage Weil <sage@redhat.com>
Summary: In MyRocks, it is sometimes important to get propeties only for the subset of the database. This diff implements the API in RocksDB.
Test Plan: ran the GetPropertiesOfTablesInRange
Reviewers: rven, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48651
Summary:
Add rocksdb.num-running-compactions and rocksdb.num-running-flushes
to GetIntProperty() that reports the number of currently running
compactions / flushes.
Test Plan: augmented existing tests in db_test
Reviewers: igor, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48693
Summary:
Separate a new class InternalIterator from class Iterator, when the look-up is done internally, which also means they operate on key with sequence ID and type.
This change will enable potential future optimizations but for now InternalIterator's functions are still the same as Iterator's.
At the same time, separate the cleanup function to a separate class and let both of InternalIterator and Iterator inherit from it.
Test Plan: Run all existing tests.
Reviewers: igor, yhchiang, anthony, kradhakrishnan, IslamAbdelRahman, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48549
Summary:
Remove db_impl_debug from NDEBUG, but allow it in ROCKSDB_LITE
These functions by definition should not be included in NDEBUG and they are only used for testing
This is based on offline discussion with @yhchiang and @igor
Test Plan:
make static_lib
make check
Reviewers: igor, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: igor, yhchiang, dhruba
Differential Revision: https://reviews.facebook.net/D48573
Summary:
Long time ago we add InternalDumpCommand to ldb_tool https://reviews.facebook.net/D11517
This command is using TEST_NewInternalIterator although it's not a test. This patch move TEST_NewInternalIterator outside of db_impl_debug.cc
Test Plan:
make check
make static_lib
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48561
Summary: It would be nice to have and access to table properties in compaction callbacks. In MyRocks project, it will make possible to update optimizer statistics online.
Test Plan: ran the unit test. Ran myrocks with the new way of collecting stats.
Reviewers: igor, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48267
Summary:
Two changes:
1. remove *V2 filter stuff. we deprecated that a while ago
2. clarify what happens when user sets max_subcompactions to bigger than 1
Test Plan: none
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47871
Summary:
To support a new MongoDB capability, we need to make sure that we don't do any IO for a short period of time. For background, see:
* https://jira.mongodb.org/browse/SERVER-20704
* https://jira.mongodb.org/browse/SERVER-18899
To implement that, I add a new API calls PauseBackgroundWork() and ContinueBackgroundWork() which reuse the capability we already have in place for RefitLevel() function.
Test Plan: Added a new test in db_test. Made sure that test fails when PauseBackgroundWork() is commented out.
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47901
Summary:
This is an initial version of bulk load feature
This diff allow us to create sst files, and then bulk load them later, right now the restrictions for loading an sst file are
(1) Memtables are empty
(2) Added sst files have sequence number = 0, and existing values in database have sequence number = 0
(3) Added sst files values are not overlapping
Test Plan: unit testing
Reviewers: igor, ott, sdong
Reviewed By: sdong
Subscribers: leveldb, ott, dhruba
Differential Revision: https://reviews.facebook.net/D39081
Summary:
This patch fixes#7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
Summary:
This diff is a collection of cleanups that were initially part of D43179.
Additionally it adds a unified way of defining key-value maps that use a
Comparator for sorting (this was previously implemented in four different
places).
Test Plan: make clean check all
Reviewers: rven, anthony, yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45993
Summary:
Initial implementation of Pessimistic Transactions. This diff contains the api changes discussed in D38913. This diff is pretty large, so let me know if people would prefer to meet up to discuss it.
MyRocks folks: please take a look at the API in include/rocksdb/utilities/transaction[_db].h and let me know if you have any issues.
Also, you'll notice a couple of TODOs in the implementation of RollbackToSavePoint(). After chatting with Siying, I'm going to send out a separate diff for an alternate implementation of this feature that implements the rollback inside of WriteBatch/WriteBatchWithIndex. We can then decide which route is preferable.
Next, I'm planning on doing some perf testing and then integrating this diff into MongoRocks for further testing.
Test Plan: Unit tests, db_bench parallel testing.
Reviewers: igor, rven, sdong, yhchiang, yoshinorim
Reviewed By: sdong
Subscribers: hermanlee4, maykov, spetrunia, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D40869
Summary: Implemented this simple wrapper for something else I was working on. Seemed like it makes sense to expose it instead of burying it in some random code.
Test Plan: added test
Reviewers: rven, kradhakrishnan, sdong, yhchiang
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43293
Summary:
Visual Studio complains about deque<LogWriterNumber> because LogWriterNumber is non-copyable for its unique_ptr member writer. Move away from it, and do explit free.
It is less safe but I can't think of a better way to unblock it.
Test Plan: valgrind check test
Reviewers: anthony, IslamAbdelRahman, kolmike, rven, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43647
Summary:
Subj. We really need this feature.
Previous diff D40899 has most of the changes to make this possible, this diff just adds the method.
Test Plan: `make check`, the new test fails without this diff; ran with ASAN, TSAN and valgrind.
Reviewers: igor, rven, IslamAbdelRahman, anthony, kradhakrishnan, tnovak, yhchiang, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, maykov, hermanlee4, yoshinorim, tnovak, dhruba
Differential Revision: https://reviews.facebook.net/D40905
Summary:
I'll just copy internal task summary here:
"
This sequence will cause data loss in the middle after an sync write:
non-sync write key 1
flush triggered, not yet scheduled
sync write key 2
system crash
After rebooting, users might see key 2 but not key 1, which violates the API of sync write.
This can be reproduced using unit test FaultInjectionTest::DISABLED_WriteOptionSyncTest.
One way to fix it is for a sync write, if there is outstanding unsynced log files, we need to syc them too.
"
This diff should be considered together with the next diff D40905; in isolation this fix probably could be a little simpler.
Test Plan: `make check`; added a test for that (DBTest.SyncingPreviousLogs) before noticing FaultInjectionTest.WriteOptionSyncTest (keeping both since mine asserts a bit more); both tests fail without this diff; for D40905 stacked on top of this diff, ran tests with ASAN, TSAN and valgrind
Reviewers: rven, yhchiang, IslamAbdelRahman, anthony, kradhakrishnan, igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D40899
Summary:
When we first started, max_background_flushes was 0 by default and compaction thread was executing flushes (since there was no flush thread). Then, we switched the default max_background_flushes to 1. However, we still support the case where there is no flush thread and flushes are done in compaction. This is making our code a bit more complicated. By not supporting this use-case we can make our code simpler.
We have a special case that when you set max_background_flushes to 0, we
schedule the flush to execute on the compaction thread.
Test Plan: make check (there might be some unit tests that depend on this behavior)
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41931
Summary:
In one of our recent meetings, we discussed deprecating features that are not being actively used. One of those features, at least within Facebook, is timeout_hint. The feature is really nicely implemented, but if nobody needs it, we should remove it from our code-base (until we get a valid use-case). Some arguments:
* Less code == better icache hit rate, smaller builds, simpler code
* The motivation for adding timeout_hint_us was to work-around RocksDB's stall issue. However, we're currently addressing the stall issue itself (see @sdong's recent work on stall write_rate), so we should never see sharp lock-ups in the future.
* Nobody is using the feature within Facebook's code-base. Googling for `timeout_hint_us` also doesn't yield any users.
Test Plan: make check
Reviewers: anthony, kradhakrishnan, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: sdong, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41937
Summary:
Public API depends on port/port.h which is wrong. Fix it.
Also with gcc 4.8.1 build was broken as MAX_INT32 was not recognized. Fix it by using ::max in linux.
Test Plan: Build it and try to build an external project on top of it.
Reviewers: anthony, yhchiang, kradhakrishnan, igor
Reviewed By: igor
Subscribers: yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D41745
Summary:
This fixes the following scenario we've hit:
- we reached max_total_wal_size, created a new wal and scheduled flushing all memtables corresponding to the old one,
- before the last of these flushes started its column family was dropped; the last background flush call was a no-op; no one removed the old wal from alive_logs_,
- hours have passed and no flushes happened even though lots of data was written; data is written to different column families, compactions are disabled; old column families are dropped before memtable grows big enough to trigger a flush; the old wal still sits in alive_logs_ preventing max_total_wal_size limit from kicking in,
- a few more hours pass and we run out disk space because of one huge .log file.
Test Plan: `make check`; backported the new test, checked that it fails without this diff
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D40893
Summary: Make RocksDb build and run on Windows to be functionally
complete and performant. All existing test cases run with no
regressions. Performance numbers are in the pull-request.
Test plan: make all of the existing unit tests pass, obtain perf numbers.
Co-authored-by: Praveen Rao praveensinghrao@outlook.com
Co-authored-by: Sherlock Huang baihan.huang@gmail.com
Co-authored-by: Alex Zinoviev alexander.zinoviev@me.com
Co-authored-by: Dmitri Smirnov dmitrism@microsoft.com
Summary:
This diff update DB::CompactRange to use RangeCompactionOptions instead of using multiple parameters
Old CompactRange is still available but deprecated
Test Plan:
make all check
make rocksdbjava
USE_CLANG=1 make all
OPT=-DROCKSDB_LITE make release
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D40209
Summary:
We go to great lengths to make sure MaybeScheduleFlushOrCompaction() is called outside of write thread. But anyway, it's still called in the mutex, so it's not that much cheaper.
This diff removes the "optimization" and cleans up the code a bit.
Test Plan: make check
Reviewers: rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40113
Summary:
Add an option in GetApproximateSize() so that the result will include estimated sizes in mem tables.
To implement it, implement an estimated count from the beginning to a key in skip list. The approach is to count to find the entry, how many Next() is issued from each level, and sum them with a weight that is <branching factor> ^ <level>.
Test Plan: Add a test case
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D40119
Summary:
We slow down data into the database to the rate of options.delayed_write_rate (a new option) with this patch.
The thread synchronization approach I take is to still synchronize write controller by DB mutex and GetDelay() is inside DB mutex. Try to minimize the frequency of getting time in GetDelay(). I verified it through db_bench and it seems to work
hard_rate_limit is deprecated.
options.delayed_write_rate is still not dynamically changeable. Need to work on it as a follow-up.
Test Plan: Add new unit tests in db_test
Reviewers: yhchiang, rven, kradhakrishnan, anthony, MarkCallaghan, igor
Reviewed By: igor
Subscribers: ikabiljo, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D36351
Summary:
Adding largest sequence number to FlushJobInfo
and passing flushed file metadata to NotifyOnFlushCompleted which include alot of other values that we may want to expose in FlushJobInfo
Test Plan: make check
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D39927
Summary:
EventListener::OnFlushCompleted() now passes a structure instead
of a list of parameters. This minimizes the API change in the
future.
Test Plan:
listener_test
compact_files_test
example/compact_files_example
Reviewers: kradhakrishnan, sdong, IslamAbdelRahman, rven, igor
Reviewed By: rven, igor
Subscribers: IslamAbdelRahman, rven, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39543
Summary:
This diff updates the logic of how we do trivial move, now trivial move can run on any number of files in input level as long as they are not overlapping
The conditions for trivial move have been updated
Introduced conditions:
- Trivial move cannot happen if we have a compaction filter (except if the compaction is not manual)
- Input level files cannot be overlapping
Removed conditions:
- Trivial move only run when the compaction is not manual
- Input level should can contain only 1 file
More context on what tests failed because of Trivial move
```
DBTest.CompactionsGenerateMultipleFiles
This test is expecting compaction on a file in L0 to generate multiple files in L1, this test will fail with trivial move because we end up with one file in L1
```
```
DBTest.NoSpaceCompactRange
This test expect compaction to fail when we force environment to report running out of space, of course this is not valid in trivial move situation
because trivial move does not need any extra space, and did not check for that
```
```
DBTest.DropWrites
Similar to DBTest.NoSpaceCompactRange
```
```
DBTest.DeleteObsoleteFilesPendingOutputs
This test expect that a file in L2 is deleted after it's moved to L3, this is not valid with trivial move because although the file was moved it is now used by L3
```
```
CuckooTableDBTest.CompactionIntoMultipleFiles
Same as DBTest.CompactionsGenerateMultipleFiles
```
This diff is based on a work by @sdong https://reviews.facebook.net/D34149
Test Plan: make -j64 check
Reviewers: rven, sdong, igor
Reviewed By: igor
Subscribers: yhchiang, ott, march, dhruba, sdong
Differential Revision: https://reviews.facebook.net/D34797
Summary:
Allow EventListener::OnCompactionCompleted to return CompactionJobStats,
which contains useful information about a compaction.
Example CompactionJobStats returned by OnCompactionCompleted():
smallest_output_key_prefix 05000000
largest_output_key_prefix 06990000
elapsed_time 42419
num_input_records 300
num_input_files 3
num_input_files_at_output_level 2
num_output_records 200
num_output_files 1
actual_bytes_input 167200
actual_bytes_output 110688
total_input_raw_key_bytes 5400
total_input_raw_value_bytes 300000
num_records_replaced 100
is_manual_compaction 1
Test Plan: Developed a mega test in db_test which covers 20 variables in CompactionJobStats.
Reviewers: rven, igor, anthony, sdong
Reviewed By: sdong
Subscribers: tnovak, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38463
Summary:
Add EventListener::OnTableFileCreated(), which will be called
when a table file is created. This patch is part of the
EventLogger and EventListener integration.
Test Plan: Augment existing test in db/listener_test.cc
Reviewers: anthony, kradhakrishnan, rven, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38865
Summary: In DB::CompactRange(), change parameter "reduce_level" to "change_level". Users can compact all data to the last level if needed. By doing it, users can migrate the DB to options.level_compaction_dynamic_level_bytes=true.
Test Plan: Add a unit test for it.
Reviewers: yhchiang, anthony, kradhakrishnan, igor, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39099
Summary:
DBImpl::notifying_events_ is a internal counter in DBImpl which is
used to prevent DB close when DB is notifying events. However, as
the current events all rely on either compaction or flush which
already have similar counters to prevent DB close, it is safe to
remove notifying_events_.
Test Plan:
listener_test
examples/compact_files_example
Reviewers: igor, anthony, kradhakrishnan, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39315
Summary: Optimistic transactions supporting begin/commit/rollback semantics. Currently relies on checking the memtable to determine if there are any collisions at commit time. Not yet implemented would be a way of enuring the memtable has some minimum amount of history so that we won't fail to commit when the memtable is empty. You should probably start with transaction.h to get an overview of what is currently supported.
Test Plan: Added a new test, but still need to look into stress testing.
Reviewers: yhchiang, igor, rven, sdong
Reviewed By: sdong
Subscribers: adamretter, MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D33435
Summary: Removed an unused private variable in db_impl.h
Test Plan: make db_test
Reviewers: sdong, anthony, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38925
Summary:
Added a couple functions to WriteBatchWithIndex to make it easier to query the value of a key including reading pending writes from a batch. (This is needed for transactions).
I created write_batch_with_index_internal.h to use to store an internal-only helper function since there wasn't a good place in the existing class hierarchy to store this function (and it didn't seem right to stick this function inside WriteBatchInternal::Rep).
Since I needed to access the WriteBatchEntryComparator, I moved some helper classes from write_batch_with_index.cc into write_batch_with_index_internal.h/.cc. WriteBatchIndexEntry, ReadableWriteBatch, and WriteBatchEntryComparator are all unchanged (just moved to a different file(s)).
Test Plan: Added new unit tests.
Reviewers: rven, yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38037
Summary:
Added these events:
* Recovery start, finish and also when recovery creates a file
* Trivial move
* Compaction start, finish and when compaction creates a file
* Flush start, finish
Also includes small fix to EventLogger
Also added option ROCKSDB_PRINT_EVENTS_TO_STDOUT which is useful when we debug things. I've spent far too much time chasing LOG files.
Still didn't get sst table properties in JSON. They are written very deeply into the stack. I'll address in separate diff.
TODO:
* Write specification. Let's first use this for a while and figure out what's good data to put here, too. After that we'll write spec
* Write tools that parse and analyze LOGs. This can be in python or go. Good intern task.
Test Plan: Ran db_bench with ROCKSDB_PRINT_EVENTS_TO_STDOUT. Here's the output: https://phabricator.fb.com/P19811976
Reviewers: sdong, yhchiang, rven, MarkCallaghan, kradhakrishnan, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37521
Summary:
This diff implements a new `DB` method `PromoteL0` which moves all files in L0
to a given level skipping compaction, provided that the files have disjoint
ranges and all levels up to the target level are empty.
This method provides finer-grain control for trivial compactions, and it is
useful for bulk-loading pre-sorted keys. Compared to D34797, it does not change
the semantics of an existing operation, which can impact existing code.
PromoteL0 is designed to work well in combination with the proposed
`GetSstFileWriter`/`AddFile` interface, enabling to "design" the level structure
by populating one level at a time. Such fine-grained control can be very useful
for static or mostly-static databases.
Test Plan: `make check`
Reviewers: IslamAbdelRahman, philipp, MarkCallaghan, yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37107
Summary:
Some Mongo+Rocks datasets in Parse's environment are not doing compactions very frequently. During the quiet period (with no IO), we'd like to schedule compactions so that our reads become faster. Also, aggressively compacting during quiet periods helps when write bursts happen. In addition, we also want to compact files that are containing deleted key ranges (like old oplog keys).
All of this is currently not possible with CompactRange() because it's single-threaded and blocks all other compactions from happening. Running CompactRange() risks an issue of blocking writes because we generate too much Level 0 files before the compaction is over. Stopping writes is very dangerous because they hold transaction locks. We tried running manual compaction once on Mongo+Rocks and everything fell apart.
MarkForCompaction() solves all of those problems. This is very light-weight manual compaction. It is lower priority than automatic compactions, which means it shouldn't interfere with background process keeping the LSM tree clean. However, if no automatic compactions need to be run (or we have extra background threads available), we will start compacting files that are marked for compaction.
Test Plan: added a new unit test
Reviewers: yhchiang, rven, MarkCallaghan, sdong
Reviewed By: sdong
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37083
Summary:
Cleaning up log files can do heavy IO, since we call ftruncate() in the destructor. We don't want to call ftruncate() in user threads.
This diff moves cleaning to background threads (flush and compaction)
Test Plan: make check, will also run valgrind
Reviewers: yhchiang, rven, MarkCallaghan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36177
Summary: Some suggestions for cleanup from Igor.
Test Plan: Regression tests.
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D35169
Summary:
Here's my proposal for making our LOGs easier to read by machines.
The idea is to dump all events as JSON objects. JSON is easy to read by humans, but more importantly, it's easy to read by machines. That way, we can parse this, load into SQLite/mongo and then query or visualize.
I started with table_create and table_delete events, but if everybody agrees, I'll continue by adding more events (flush/compaction/etc etc)
Test Plan:
Ran db_bench. Observed:
2015/01/15-14:13:25.788019 1105ef000 EVENT_LOG_v1 {"time_micros": 1421360005788015, "event": "table_file_creation", "file_number": 12, "file_size": 1909699}
2015/01/15-14:13:25.956500 110740000 EVENT_LOG_v1 {"time_micros": 1421360005956498, "event": "table_file_deletion", "file_number": 12}
Reviewers: yhchiang, rven, dhruba, MarkCallaghan, lgalanis, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31647
Summary:
Provide an API which enables users to infor Rocksdb that it is
shutting down.
Test Plan: db_test
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34617
Summary:
When using latest clang (3.6 or 3.7/trunck) rocksdb is failing with many errors. Almost all of them are missing override errors. This diff adds missing override keyword. No manual changes.
Prerequisites: bear and clang 3.5 build with extra tools
```lang=bash
% USE_CLANG=1 bear make all # generate a compilation database http://clang.llvm.org/docs/JSONCompilationDatabase.html
% clang-modernize -p . -include . -add-override
% make format
```
Test Plan:
Make sure all tests are passing.
```lang=bash
% #Use default fb code clang.
% make check
```
Verify less error and no missing override errors.
```lang=bash
% # Have trunk clang present in path.
% ROCKSDB_NO_FBCODE=1 CC=clang CXX=clang++ make
```
Reviewers: igor, kradhakrishnan, rven, meyering, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34077
Summary:
It would be good to assing background job their IDs. Two benefits:
1) makes LOGs more readable
2) I might use it in my EventLogger, which will try to make our LOG easier to read/query/visualize
Test Plan: ran rocksdb, read the LOG
Reviewers: sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31617
Summary:
Add a counter for collecting the wait time on db mutex.
Also add MutexWrapper and CondVarWrapper for measuring wait time.
Test Plan:
./db_test
export ROCKSDB_TESTS=MutexWaitStats
./db_test
verify stats output using db_bench
make clean
make release
./db_bench --statistics=1 --benchmarks=fillseq,readwhilewriting --num=10000 --threads=10
Sample output:
rocksdb.db.mutex.wait.micros COUNT : 7546866
Reviewers: MarkCallaghan, rven, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32787
Summary: This adds a listener for compactions, and gives some useful statistics on each compaction pass.
Test Plan: Unit tests.
Reviewers: sdong, igor, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D31641
Summary: log_dir_unsynced_ is a confusing name. Rename it to log_dir_synced_ and flip the value.
Test Plan: Run ./fault_injection_test
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D32235
Summary:
1. If WAL directory is different from db directory. Sync the directory after creating a log file under it.
2. After creating an SST file, sync its parent directory instead of DB directory.
3. change the check of kResetDeleteUnsyncedFiles in fault_injection_test. Since we changed the behavior to sync log files' parent directory after first WAL sync, instead of creating, kResetDeleteUnsyncedFiles will not guarantee to show post sync updates.
Test Plan: make all check
Reviewers: yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D32067
