Summary:
We haven't been populating `NO_FILE_CLOSES` since v1.5.8 even though it was never marked as deprecated. Start populating it again. Conveniently `DeleteTableReader` has an unused `void*` argument that we can use...
Blame: 63f216ee0aCloses#4700.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4703
Differential Revision: D13146769
Pulled By: ajkr
fbshipit-source-id: ad8d6fb0493e701f60a165a3bca1787d255be008
Summary:
The old RangeDelAggregator did expensive pre-processing work
to create a collapsed, binary-searchable representation of range
tombstones. With FragmentedRangeTombstoneIterator, much of this work is
now unnecessary. RangeDelAggregatorV2 takes advantage of this by seeking
in each iterator to find a covering tombstone in ShouldDelete, while
doing minimal work in AddTombstones. The old RangeDelAggregator is still
used during flush/compaction for now, though RangeDelAggregatorV2 will
support those uses in a future PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4649
Differential Revision: D13146964
Pulled By: abhimadan
fbshipit-source-id: be29a4c020fc440500c137216fcc1cf529571eb3
Summary:
Rather than storing a `vector<RangeTombstone>`, we now store a
`vector<RangeTombstoneStack>` and a `vector<SequenceNumber>`. A
`RangeTombstoneStack` contains the start and end keys of a range tombstone
fragment, and indices into the seqnum vector to indicate which sequence
numbers the fragment is located at. The diagram below illustrates an
example:
```
tombstones_: [a, b) [c, e) [h, k)
| \ / \ / |
| \ / \ / |
v v v v
tombstone_seqs_: [ 5 3 10 7 2 8 6 ]
```
This format allows binary searching the tombstone list to use less key
comparisons, which helps in cases where there are many overlapping
tombstones. Also, this format makes it easier to add DBIter-like
semantics to `FragmentedRangeTombstoneIterator` in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4632
Differential Revision: D13053103
Pulled By: abhimadan
fbshipit-source-id: e8220cc712fcf5be4d602913bb23ace8ea5f8ef0
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
This allows tombstone fragmenting to only be performed when the table is opened, and cached for subsequent accesses.
On the same DB used in #4449, running `readrandom` results in the following:
```
readrandom : 0.983 micros/op 1017076 ops/sec; 78.3 MB/s (63103 of 100000 found)
```
Now that Get performance in the presence of range tombstones is reasonable, I also compared the performance between a DB with range tombstones, "expanded" range tombstones (several point tombstones that cover the same keys the equivalent range tombstone would cover, a common workaround for DeleteRange), and no range tombstones. The created DBs had 5 million keys each, and DeleteRange was called at regular intervals (depending on the total number of range tombstones being written) after 4.5 million Puts. The table below summarizes the results of a `readwhilewriting` benchmark (in order to provide somewhat more realistic results):
```
Tombstones? | avg micros/op | stddev micros/op | avg ops/s | stddev ops/s
----------------- | ------------- | ---------------- | ------------ | ------------
None | 0.6186 | 0.04637 | 1,625,252.90 | 124,679.41
500 Expanded | 0.6019 | 0.03628 | 1,666,670.40 | 101,142.65
500 Unexpanded | 0.6435 | 0.03994 | 1,559,979.40 | 104,090.52
1k Expanded | 0.6034 | 0.04349 | 1,665,128.10 | 125,144.57
1k Unexpanded | 0.6261 | 0.03093 | 1,600,457.50 | 79,024.94
5k Expanded | 0.6163 | 0.05926 | 1,636,668.80 | 154,888.85
5k Unexpanded | 0.6402 | 0.04002 | 1,567,804.70 | 100,965.55
10k Expanded | 0.6036 | 0.05105 | 1,667,237.70 | 142,830.36
10k Unexpanded | 0.6128 | 0.02598 | 1,634,633.40 | 72,161.82
25k Expanded | 0.6198 | 0.04542 | 1,620,980.50 | 116,662.93
25k Unexpanded | 0.5478 | 0.0362 | 1,833,059.10 | 121,233.81
50k Expanded | 0.5104 | 0.04347 | 1,973,107.90 | 184,073.49
50k Unexpanded | 0.4528 | 0.03387 | 2,219,034.50 | 170,984.32
```
After a large enough quantity of range tombstones are written, range tombstone Gets can become faster than reading from an equivalent DB with several point tombstones.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4493
Differential Revision: D10842844
Pulled By: abhimadan
fbshipit-source-id: a7d44534f8120e6aabb65779d26c6b9df954c509
Summary:
Previously, range tombstones were accumulated from every level, which
was necessary if a range tombstone in a higher level covered a key in a lower
level. However, RangeDelAggregator::AddTombstones's complexity is based on
the number of tombstones that are currently stored in it, which is wasteful in
the Get case, where we only need to know the highest sequence number of range
tombstones that cover the key from higher levels, and compute the highest covering
sequence number at the current level. This change introduces this optimization, and
removes the use of RangeDelAggregator from the Get path.
In the benchmark results, the following command was used to initialize the database:
```
./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8
```
...and the following command was used to measure read throughput:
```
./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32
```
The filluniquerandom command was only run once, and the resulting database was used
to measure read performance before and after the PR. Both binaries were compiled with
`DEBUG_LEVEL=0`.
Readrandom results before PR:
```
readrandom : 4.544 micros/op 220090 ops/sec; 16.9 MB/s (63103 of 100000 found)
```
Readrandom results after PR:
```
readrandom : 11.147 micros/op 89707 ops/sec; 6.9 MB/s (63103 of 100000 found)
```
So it's actually slower right now, but this PR paves the way for future optimizations (see #4493).
----
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449
Differential Revision: D10370575
Pulled By: abhimadan
fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
Summary:
We would like to collect file-system-level statistics including file name, offset, length, return code, latency, etc., which requires to add callbacks to intercept file IO function calls when RocksDB is running.
To collect file-system-level statistics, users can inherit the class `EventListener`, as in `TestFileOperationListener `. Note that `TestFileOperationListener::ShouldBeNotifiedOnFileIO()` returns true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3933
Differential Revision: D10219571
Pulled By: riversand963
fbshipit-source-id: 7acc577a2d31097766a27adb6f78eaf8b1e8ff15
Summary:
To more accurately truncate range tombstones at SST boundaries,
we now represent them in RangeDelAggregator using InternalKeys, which
are end-key-exclusive as they were before this change.
During compaction, "atomic compaction unit boundaries" (the range of
keys contained in neighbouring and overlaping SSTs) are propagated down
to RangeDelAggregator to truncate range tombstones at those boundariies
instead. See https://github.com/facebook/rocksdb/pull/4432#discussion_r221072219 and https://github.com/facebook/rocksdb/pull/4432#discussion_r221138683
for motivating examples.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4432
Differential Revision: D10263952
Pulled By: abhimadan
fbshipit-source-id: 2fe85ff8a02b3a6a2de2edfe708012797a7bd579
Summary:
Given that index value is a BlockHandle, which is basically an <offset, size> pair we can apply delta encoding on the values. The first value at each index restart interval encoded the full BlockHandle but the rest encode only the size. Refer to IndexBlockIter::DecodeCurrentValue for the detail of the encoding. This reduces the index size which helps using the block cache more efficiently. The feature is enabled with using format_version 4.
The feature comes with a bit of cpu overhead which should be paid back by the higher cache hits due to smaller index block size.
Results with sysbench read-only using 4k blocks and using 16 index restart interval:
Format 2:
19585 rocksdb read-only range=100
Format 3:
19569 rocksdb read-only range=100
Format 4:
19352 rocksdb read-only range=100
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3983
Differential Revision: D8361343
Pulled By: maysamyabandeh
fbshipit-source-id: f882ee082322acac32b0072e2bdbb0b5f854e651
Summary:
RocksDB used to store global_seqno in external SST files written by
SstFileWriter. During file ingestion, RocksDB uses `pwrite` to update the
`global_seqno`. Since random write is not supported in some non-POSIX compliant
file systems, external SST file ingestion is not supported on these file
systems. To address this limitation, we no longer update `global_seqno` during
file ingestion. Later RocksDB uses the MANIFEST and other information in table
properties to deduce global seqno for externally-ingested SST files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4172
Differential Revision: D8961465
Pulled By: riversand963
fbshipit-source-id: 4382ec85270a96be5bc0cf33758ca2b167b05071
Summary:
Do not consider the range tombstone sentinel key as causing 2 adjacent
sstables in a level to overlap. When a range tombstone's end key is the
largest key in an sstable, the sstable's end key is so to a "sentinel"
value that is the smallest key in the next sstable with a sequence
number of kMaxSequenceNumber. This "sentinel" is guaranteed to not
overlap in internal-key space with the next sstable. Unfortunately,
GetOverlappingFiles uses user-keys to determine overlap and was thus
considering 2 adjacent sstables in a level to overlap if they were
separated by this sentinel key. This in turn would cause compactions to
be larger than necessary.
Note that this conflicts with
https://github.com/facebook/rocksdb/pull/2769 and cases
`DBRangeDelTest.CompactionTreatsSplitInputLevelDeletionAtomically` to
fail.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4050
Differential Revision: D8844423
Pulled By: ajkr
fbshipit-source-id: df3f9f1db8f4cff2bff77376b98b83c2ae1d155b
Summary:
https://github.com/facebook/rocksdb/pull/3881 fixed a bug where PinnableSlice pin mmap files which could be deleted with background compaction. This is however a non-issue for ReadOnlyDB when there is no compaction running and max_open_files is -1. This patch reenables the pinning feature for that case.
Closes https://github.com/facebook/rocksdb/pull/4053
Differential Revision: D8662546
Pulled By: maysamyabandeh
fbshipit-source-id: 402962602eb0f644e17822748332999c3af029fd
Summary:
Pass in `for_compaction` to `BlockBasedTableIterator` via `BlockBasedTableReader::NewIterator`.
In 7103559f49, `for_compaction` was set in `BlockBasedTable::Rep` via `BlockBasedTable::SetupForCompaction`. In hindsight it was not the right decision; it also caused TSAN to complain.
Closes https://github.com/facebook/rocksdb/pull/4048
Differential Revision: D8601056
Pulled By: sagar0
fbshipit-source-id: 30127e898c15c38c1080d57710b8c5a6d64a0ab3
Summary:
Currently it is not possible to change bloom filter config without restart the db, which is causing a lot of operational complexity for users.
This PR aims to make it possible to dynamically change bloom filter config.
Closes https://github.com/facebook/rocksdb/pull/3601
Differential Revision: D7253114
Pulled By: miasantreble
fbshipit-source-id: f22595437d3e0b86c95918c484502de2ceca120c
Summary:
`ReadaheadRandomAccessFile` had an unwritten assumption, which was that its wrapped file's `Read()` function always copies into the provided scratch buffer. Actually this was not true when the wrapped file was `PosixMmapReadableFile`, whose `Read()` implementation does no copying and instead returns a `Slice` pointing directly into the `mmap`'d memory region. This PR:
- prevents `ReadaheadRandomAccessFile` from ever wrapping mmap readable files
- adds an assert for the assumption `ReadaheadRandomAccessFile` makes about the wrapped file's use of scratch buffer
Closes https://github.com/facebook/rocksdb/pull/3813
Differential Revision: D7891513
Pulled By: ajkr
fbshipit-source-id: dc64a55222d6af280c39a1852ee39e9e9d7cde7d
Summary:
The origin commit #3635 will hurt performance for users who aren't using range deletions， because unneeded std::set operations, so it was reverted by commit 44653c7b7a. (see #3672)
To fix this, move the set to and add a check in , i.e., file will be added only if is non-nullptr.
The db_bench command which find the performance regression:
> ./db_bench --benchmarks=fillrandom,seekrandomwhilewriting --threads=1 --num=1000000 --reads=150000 --key_size=66 > --value_size=1262 --statistics=0 --compression_ratio=0.5 --histogram=1 --seek_nexts=1 --stats_per_interval=1 > --stats_interval_seconds=600 --max_background_flushes=4 --num_multi_db=1 --max_background_compactions=16 --seed=1522388277 > -write_buffer_size=1048576 --level0_file_num_compaction_trigger=10000 --compression_type=none
Before and after the modification, I re-run this command on the machine, the results of are as follows：
**fillrandom**
Table | P50 | P75 | P99 | P99.9 | P99.99 |
---- | --- | --- | --- | ----- | ------ |
before commit | 5.92 | 8.57 | 19.63 | 980.97 | 12196.00 |
after commit | 5.91 | 8.55 | 19.34 | 965.56 | 13513.56 |
**seekrandomwhilewriting**
Table | P50 | P75 | P99 | P99.9 | P99.99 |
---- | --- | --- | --- | ----- | ------ |
before commit | 1418.62 | 1867.01 | 3823.28 | 4980.99 | 9240.00 |
after commit | 1450.54 | 1880.61 | 3962.87 | 5429.60 | 7542.86 |
Closes https://github.com/facebook/rocksdb/pull/3800
Differential Revision: D7874245
Pulled By: ajkr
fbshipit-source-id: 2e8bec781b3f7399246babd66395c88619534a17
Summary:
In this change, an option to set different paths for different column families is added.
This option is set via cf_paths setting of ColumnFamilyOptions. This option will work in a similar fashion to db_paths setting. Cf_paths is a vector of Dbpath values which contains a pair of the absolute path and target size. Multiple levels in a Column family can go to different paths if cf_paths has more than one path.
To maintain backward compatibility, if cf_paths is not specified for a column family, db_paths setting will be used. Note that, if db_paths setting is also not specified, RocksDB already has code to use db_name as the only path.
Changes :
1) A new member "cf_paths" is added to ImmutableCfOptions. This is set, based on cf_paths setting of ColumnFamilyOptions and db_paths setting of ImmutableDbOptions. This member is used to identify the path information whenever files are accessed.
2) Validation checks are added for cf_paths setting based on existing checks for db_paths setting.
3) DestroyDB, PurgeObsoleteFiles etc. are edited to support multiple cf_paths.
4) Unit tests are added appropriately.
Closes https://github.com/facebook/rocksdb/pull/3102
Differential Revision: D6951697
Pulled By: ajkr
fbshipit-source-id: 60d2262862b0a8fd6605b09ccb0da32bb331787d
Summary:
RangeDelAggregator will remember the files whose range tombstones have been added,
so the caller can check whether the file has been added before call AddTombstones.
Closes https://github.com/facebook/rocksdb/pull/3635
Differential Revision: D7354604
Pulled By: ajkr
fbshipit-source-id: 9b9f7ec130556028df417e650711554b46d8d107
Summary:
- removed a few unneeded variables
- fused some variable declarations and their assignments
- fixed right-trimming code in string_util.cc to not underflow
- simplifed an assertion
- move non-nullptr check assertion before dereferencing of that pointer
- pass an std::string function parameter by const reference instead of by value (avoiding potential copy)
Closes https://github.com/facebook/rocksdb/pull/3507
Differential Revision: D7004679
Pulled By: sagar0
fbshipit-source-id: 52944952d9b56dfcac3bea3cd7878e315bb563c4
Summary:
While investigating the usage of `new_table_iterator_nanos` perf counter, I saw some code was wrapper around with unnecessary status check ... so removed it.
Closes https://github.com/facebook/rocksdb/pull/3120
Differential Revision: D6229181
Pulled By: sagar0
fbshipit-source-id: f8a44fe67f5a05df94553fdb233b21e54e88cc34
Summary:
As discussed on the mailing list (["Skipping entire SSTs while iterating"](https://groups.google.com/forum/#!topic/rocksdb/ujHCJVLrHlU)), this patch adds a `table_filter` to `ReadOptions` that allows specifying a callback to be executed during iteration before each table in the database is scanned. The callback is passed the table's properties; the table is scanned iff the callback returns true.
This can be used in conjunction with a `TablePropertiesCollector` to dramatically speed up scans by skipping tables that are known to contain irrelevant data for the scan at hand.
We're using this [downstream in CockroachDB](https://github.com/cockroachdb/cockroach/blob/master/pkg/storage/engine/db.cc#L2009-L2022) already. With this feature, under ideal conditions, we can reduce the time of an incremental backup in from hours to seconds.
FYI, the first commit in this PR fixes a segfault that I unfortunately have not figured out how to reproduce outside of CockroachDB. I'm hoping you accept it on the grounds that it is not correct to return 8-byte aligned memory from a call to `malloc` on some 64-bit platforms; one correct approach is to infer the necessary alignment from `std::max_align_t`, as done here. As noted in the first commit message, the bug is tickled by having a`std::function` in `struct ReadOptions`. That is, the following patch alone is enough to cause RocksDB to segfault when run from CockroachDB on Darwin.
```diff
--- a/include/rocksdb/options.h
+++ b/include/rocksdb/options.h
@@ -1546,6 +1546,13 @@ struct ReadOptions {
// Default: false
bool ignore_range_deletions;
+ // A callback to determine whether relevant keys for this scan exist in a
+ // given table based on the table's properties. The callback is passed the
+ // properties of each table during iteration. If the callback returns false,
+ // the table will not be scanned.
+ // Default: empty (every table will be scanned)
+ std::function<bool(const TableProperties&)> table_filter;
+
ReadOptions();
ReadOptions(bool cksum, bool cache);
};
```
/cc danhhz
Closes https://github.com/facebook/rocksdb/pull/2265
Differential Revision: D5054262
Pulled By: yiwu-arbug
fbshipit-source-id: dd6b28f2bba6cb8466250d8c5c542d3c92785476
Summary:
we were passing `record_read_stats` (a bool) as the `hist_type` argument, which meant we were updating either `rocksdb.db.get.micros` (`hist_type == 0`) or `rocksdb.db.write.micros` (`hist_type == 1`) with wrong data.
Closes https://github.com/facebook/rocksdb/pull/2666
Differential Revision: D5520384
Pulled By: ajkr
fbshipit-source-id: 2f7c956aec32f8b58c5c18845ac478e0230c9516
Summary:
This reverts the previous commit 1d7048c598, which broke the build.
Did a `git revert 1d7048c`.
Closes https://github.com/facebook/rocksdb/pull/2627
Differential Revision: D5476473
Pulled By: sagar0
fbshipit-source-id: 4756ff5c0dfc88c17eceb00e02c36176de728d06
Summary: This uses `clang-tidy` to comment out unused parameters (in functions, methods and lambdas) in fbcode. Cases that the tool failed to handle are fixed manually.
Reviewed By: igorsugak
Differential Revision: D5454343
fbshipit-source-id: 5dee339b4334e25e963891b519a5aa81fbf627b2
Summary:
This patch enables using PinnableSlice for RowCache, changes include
not releasing the cache handle immediately after lookup in TableCache::Get, instead pass a Cleanble function which does Cache::RleaseHandle.
Closes https://github.com/facebook/rocksdb/pull/2492
Differential Revision: D5316216
Pulled By: maysamyabandeh
fbshipit-source-id: d2a684bd7e4ba73772f762e58a82b5f4fbd5d362
Summary:
We've got some DBs where iterators return Status with message "Corruption: block checksum mismatch" all the time. That's not very informative. It would be much easier to investigate if the error message contained the file name - then we would know e.g. how old the corrupted file is, which would be very useful for finding the root cause. This PR adds file name, offset and other stuff to some block corruption-related status messages.
It doesn't improve all the error messages, just a few that were easy to improve. I'm mostly interested in "block checksum mismatch" and "Bad table magic number" since they're the only corruption errors that I've ever seen in the wild.
Closes https://github.com/facebook/rocksdb/pull/2507
Differential Revision: D5345702
Pulled By: al13n321
fbshipit-source-id: fc8023d43f1935ad927cef1b9c55481ab3cb1339
Summary:
Allow users to rate limit background work based on read bytes, written bytes, or sum of read and written bytes. Support these by changing the RateLimiter API, so no additional options were needed.
Closes https://github.com/facebook/rocksdb/pull/2433
Differential Revision: D5216946
Pulled By: ajkr
fbshipit-source-id: aec57a8357dbb4bfde2003261094d786d94f724e
Summary:
Previously we returned NotSupported when ingesting files into a database containing any range deletions. This diff adds the support.
- Flush if any memtable contains range deletions overlapping the to-be-ingested file
- Place to-be-ingested file before any level that contains range deletions overlapping it.
- Added support for `Version` to return iterators over range deletions in a given level. Previously, we piggybacked getting range deletions onto `Version`'s `Get()` / `AddIterator()` functions by passing them a `RangeDelAggregator*`. But file ingestion needs to get iterators over range deletions, not populate an aggregator (since the aggregator does collapsing and doesn't expose the actual ranges).
Closes https://github.com/facebook/rocksdb/pull/2370
Differential Revision: D5127648
Pulled By: ajkr
fbshipit-source-id: 816faeb9708adfa5287962bafdde717db56e3f1a
Summary:
Now if we have iterate_upper_bound set, we continue read until get a key >= upper_bound. For a lot of cases that neighboring data blocks have a user key gap between them, our index key will be a user key in the middle to get a shorter size. For example, if we have blocks:
[a b c d][f g h]
Then the index key for the first block will be 'e'.
then if upper bound is any key between 'd' and 'e', for example, d1, d2, ..., d99999999999, we don't have to read the second block and also know that we have done our iteration by reaching the last key that smaller the upper bound already.
This diff can reduce RA in most cases.
Closes https://github.com/facebook/rocksdb/pull/2239
Differential Revision: D4990693
Pulled By: lightmark
fbshipit-source-id: ab30ea2e3c6edf3fddd5efed3c34fcf7739827ff
Summary:
Replace Options::use_direct_writes with Options::use_direct_io_for_flush_and_compaction
Now if Options::use_direct_io_for_flush_and_compaction = true, we will enable direct io for both reads and writes for flush and compaction job. Whereas Options::use_direct_reads controls user reads like iterator and Get().
Closes https://github.com/facebook/rocksdb/pull/2117
Differential Revision: D4860912
Pulled By: lightmark
fbshipit-source-id: d93575a8a5e780cf7e40797287edc425ee648c19
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
Summary:
to void future bug that caused by the mix of userkey/internalkey
Closes https://github.com/facebook/rocksdb/pull/2084
Differential Revision: D4825889
Pulled By: lightmark
fbshipit-source-id: 28411db
Summary:
It is confusing to have auto_roll_logger to stay under db/, which has nothing to do with database. Move filename together as it is a dependency.
Closes https://github.com/facebook/rocksdb/pull/2080
Differential Revision: D4821141
Pulled By: siying
fbshipit-source-id: ca7d768
Summary:
When we introduced range deletion block, TableCache::Get() and TableCache::NewIterator() each did two table cache lookups, one for range deletion block iterator and another for getting the table reader to which the Get()/NewIterator() is delegated. This extra cache lookup was very CPU-intensive (about 10% overhead in a read-heavy benchmark). We can avoid it by reusing the Cache::Handle created for range deletion block iterator to get the file reader.
Closes https://github.com/facebook/rocksdb/pull/1537
Differential Revision: D4201167
Pulled By: ajkr
fbshipit-source-id: d33ffd8
Summary:
- Made RangeDelAggregator's InternalKeyComparator member a reference-to-const so we don't need to copy-construct it. Also added InternalKeyComparator to ImmutableCFOptions so we don't need to construct one for each DBIter.
- Made MemTable::NewRangeTombstoneIterator and the table readers' NewRangeTombstoneIterator() functions return nullptr instead of NewEmptyInternalIterator to avoid the allocation. Updated callers accordingly.
Closes https://github.com/facebook/rocksdb/pull/1548
Differential Revision: D4208169
Pulled By: ajkr
fbshipit-source-id: 2fd65cf
Summary:
Since a RangeDelAggregator is created for each read request, these heap-allocating member variables were consuming significant CPU (~3% total) which slowed down request throughput. The map and pinning manager are only necessary when range deletions exist, so we can defer their initialization until the first range deletion is encountered. Currently lazy initialization is done for reads only since reads pass us a single snapshot, which is easier to store on the stack for later insertion into the map than the vector passed to us by flush or compaction.
Note the Arena member variable is still expensive, I will figure out what to do with it in a subsequent diff. It cannot be lazily initialized because we currently use this arena even to allocate empty iterators, which is necessary even when no range deletions exist.
Closes https://github.com/facebook/rocksdb/pull/1539
Differential Revision: D4203488
Pulled By: ajkr
fbshipit-source-id: 3b36279
Summary:
these functions were too complicated to change with exit points everywhere, so refactored them.
btw, please review urgently, this is a prereq to fix the 5.0 perf regression
Closes https://github.com/facebook/rocksdb/pull/1534
Differential Revision: D4198972
Pulled By: ajkr
fbshipit-source-id: 04ebfb7
Summary:
Previously we used TableCache::NewIterator() for multiple purposes (data
block iterator and range deletion iterator), and returned non-ok status in
the data block iterator. In one case where the caller only used the range
deletion block iterator (9e7cf3469b/db/version_set.cc (L965-L973)),
we didn't check/free the data block iterator containing non-ok status, which
caused a valgrind error.
So, this diff decouples creation of data block and range deletion block iterators,
and updates the callers accordingly. Both functions can return non-ok status
in an InternalIterator. Since the non-ok status is returned in an iterator that the
callers will definitely use, it should be more usable/less error-prone.
Closes https://github.com/facebook/rocksdb/pull/1513
Differential Revision: D4181423
Pulled By: ajkr
fbshipit-source-id: 835b8f5
Summary:
Note: reviewed in https://reviews.facebook.net/D65115
- DBIter maintains a range tombstone accumulator. We don't cleanup obsolete tombstones yet, so if the user seeks back and forth, the same tombstones would be added to the accumulator multiple times.
- DBImpl::NewInternalIterator() (used to make DBIter's underlying iterator) adds memtable/L0 range tombstones, L1+ range tombstones are added on-demand during NewSecondaryIterator() (see D62205)
- DBIter uses ShouldDelete() when advancing to check whether keys are covered by range tombstones
Closes https://github.com/facebook/rocksdb/pull/1464
Differential Revision: D4131753
Pulled By: ajkr
fbshipit-source-id: be86559
Summary:
This diff introduces RangeDelAggregator, which takes ownership of iterators
provided to it via AddTombstones(). The tombstones are organized in a two-level
map (snapshot stripe -> begin key -> tombstone). Tombstone creation avoids data
copy by holding Slices returned by the iterator, which remain valid thanks to pinning.
For compaction, we create a hierarchical range tombstone iterator with structure
matching the iterator over compaction input data. An aggregator based on that
iterator is used by CompactionIterator to determine which keys are covered by
range tombstones. In case of merge operand, the same aggregator is used by
MergeHelper. Upon finishing each file in the compaction, relevant range tombstones
are added to the output file's range tombstone metablock and file boundaries are
updated accordingly.
To check whether a key is covered by range tombstone, RangeDelAggregator::ShouldDelete()
considers tombstones in the key's snapshot stripe. When this function is used outside of
compaction, it also checks newer stripes, which can contain covering tombstones. Currently
the intra-stripe check involves a linear scan; however, in the future we plan to collapse ranges
within a stripe such that binary search can be used.
RangeDelAggregator::AddToBuilder() adds all range tombstones in the table's key-range
to a new table's range tombstone meta-block. Since range tombstones may fall in the gap
between files, we may need to extend some files' key-ranges. The strategy is (1) first file
extends as far left as possible and other files do not extend left, (2) all files extend right
until either the start of the next file or the end of the last range tombstone in the gap,
whichever comes first.
One other notable change is adding release/move semantics to ScopedArenaIterator
such that it can be used to transfer ownership of an arena-allocated iterator, similar to
how unique_ptr is used for malloc'd data.
Depends on D61473
Test Plan: compaction_iterator_test, mock_table, end-to-end tests in D63927
Reviewers: sdong, IslamAbdelRahman, wanning, yhchiang, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62205
Summary:
We've got a crash with this stack trace:
Program terminated with signal SIGTRAP, Trace/breakpoint trap.
#0 0x00007fc85f2f4009 in raise () from /usr/local/fbcode/gcc-4.9-glibc-2.20-fb/lib/libpthread.so.0
#1 0x00000000005c8f61 in facebook::logdevice::handle_sigsegv(int) () at logdevice/server/sigsegv.cpp:159
#2 0x00007fc85f2f4150 in <signal handler called> () at /usr/local/fbcode/gcc-4.9-glibc-2.20-fb/lib/libpthread.so.0
#3 0x00000000031ed80c in rocksdb::NewReadaheadRandomAccessFile() at util/file_reader_writer.cc:383
#4 0x00000000031ed80c in rocksdb::NewReadaheadRandomAccessFile() at util/file_reader_writer.cc:472
#5 0x00000000031558e7 in rocksdb::TableCache::GetTableReader() at db/table_cache.cc:99
#6 0x0000000003156329 in rocksdb::TableCache::NewIterator() at db/table_cache.cc:198
#7 0x0000000003166568 in rocksdb::VersionSet::MakeInputIterator() at db/version_set.cc:3345
#8 0x000000000324a94f in rocksdb::CompactionJob::ProcessKeyValueCompaction(rocksdb::CompactionJob::SubcompactionState*) () at db/compaction_job.cc:650
#9 0x000000000324c2f6 in rocksdb::CompactionJob::Run() () at db/compaction_job.cc:530
#10 0x00000000030f5ae5 in rocksdb::DBImpl::BackgroundCompaction() at db/db_impl.cc:3269
#11 0x0000000003108d36 in rocksdb::DBImpl::BackgroundCallCompaction(void*) () at db/db_impl.cc:2970
#12 0x00000000029a2a9a in facebook::logdevice::RocksDBEnv::callback(void*) () at logdevice/server/locallogstore/RocksDBEnv.cpp:26
#13 0x00000000029a2a9a in facebook::logdevice::RocksDBEnv::callback(void*) () at logdevice/server/locallogstore/RocksDBEnv.cpp:30
#14 0x00000000031e7521 in rocksdb::ThreadPool::BGThread() at util/threadpool.cc:230
#15 0x00000000031e7663 in rocksdb::BGThreadWrapper(void*) () at util/threadpool.cc:254
#16 0x00007fc85f2ea7f1 in start_thread () at /usr/local/fbcode/gcc-4.9-glibc-2.20-fb/lib/libpthread.so.0
#17 0x00007fc85e8fb46d in clone () at /usr/local/fbcode/gcc-4.9-glibc-2.20-fb/lib/libc.so.6
From looking at the code, probably what happened is this:
- `TableCache::GetTableReader()` called `Env::NewRandomAccessFile()`, which dispatched to a `PosixEnv::NewRandomAccessFile()`, where probably an `open()` call failed, so the `NewRandomAccessFile()` left a nullptr in the resulting file,
- `TableCache::GetTableReader()` called `NewReadaheadRandomAccessFile()` with that `nullptr` file,
- it tried to call file's method and crashed.
This diff is a trivial fix to this crash.
Test Plan: `make -j check`
Reviewers: sdong, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D62451
Summary: In T8216281 we decided to disable prefetching the index and filter during opening table handlers during startup (max_open_files = -1).
Test Plan: Rely on `IndexAndFilterBlocksOfNewTableAddedToCache` to guarantee L0 indexes and filters are still cached and change `PinL0IndexAndFilterBlocksTest` to make sure other levels are not cached (maybe add one more test to test we don't cache other levels?)
Reviewers: sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59913
Summary:
Add an option `iterator_readahead_size` to `ReadOptions` to enable
configurable readahead for iterators similar to the corresponding
option for compaction.
Test Plan:
```
make commit_prereq
```
Reviewers: kumar.rangarajan, ott, igor, sdong
Reviewed By: sdong
Subscribers: yiwu, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55419
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
Test Plan:
'export TEST_TMPDIR=/dev/shm/ && DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32' is OK.
I didn't run the Java tests, I don't have Java set up on my devserver.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56133
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
When the table reader is destroyed, it releases the pinned blocks (if there were any). This has to happen before the cache is destroyed, so I had to introduce a TableReader::Close(), to guarantee the order of destruction.
Test Plan:
Added two unit tests for this. Existing unit tests run fine (default is pin_l0_filter_and_index_blocks_in_cache=false).
DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32
Mac: OK.
Linux: with D55287 patched in it's OK.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54801
Summary:
Cache to have an option to fail Cache::Insert() when full. Update call sites to check status and handle error.
I totally have no idea what's correct behavior of all the call sites when they encounter error. Please let me know if you see something wrong or more unit test is needed.
Test Plan: make check -j32, see tests pass.
Reviewers: anthony, yhchiang, andrewkr, IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54705
Summary:
Add kSstFileTier to ReadTier, which allows Get and MultiGet to
read only directly from SST files and skip mem-tables.
kSstFileTier = 0x2 // data in SST files.
// Note that this ReadTier currently only supports
// Get and MultiGet and does not support iterators.
Test Plan: add new test in db_test.
Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: igor, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53511
Summary:
When Get() or NewIterator() trigger file loads, skip caching the filter block if
(1) optimize_filters_for_hits is set and (2) the file is on the bottommost
level. Also skip checking filters under the same conditions, which means that
for a preloaded file or a file that was trivially-moved to the bottom level, its
filter block will eventually expire from the cache.
- added parameters/instance variables in various places in order to propagate the config ("skip_filters") from version_set to block_based_table_reader
- in BlockBasedTable::Rep, this optimization prevents filter from being loaded when the file is opened simply by setting filter_policy = nullptr
- in BlockBasedTable::Get/BlockBasedTable::NewIterator, this optimization prevents filter from being used (even if it was loaded already) by setting filter = nullptr
Test Plan:
updated unit test:
$ ./db_test --gtest_filter=DBTest.OptimizeFiltersForHits
will also run 'make check'
Reviewers: sdong, igor, paultuckfield, anthony, rven, kradhakrishnan, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D51633
Summary:
Currently, transactions can fail even if there is no actual write conflict. This is due to relying on only the memtables to check for write-conflicts. Users have to tune memtable settings to try to avoid this, but it's hard to figure out exactly how to tune these settings.
With this diff, TransactionDB will use both memtables and SST files to determine if there are any write conflicts. This relies on the fact that BlockBasedTable stores sequence numbers for all writes that happen after any open snapshot. Also, D50295 is needed to prevent SingleDelete from disappearing writes (the TODOs in this test code will be fixed once the other diff is approved and merged).
Note that Optimistic transactions will still rely on tuning memtable settings as we do not want to read from SST while on the write thread. Also, memtable settings can still be used to reduce how often TransactionDB needs to read SST files.
Test Plan: unit tests, db bench
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb, yoshinorim
Differential Revision: https://reviews.facebook.net/D50475
Summary:
Separate a new class InternalIterator from class Iterator, when the look-up is done internally, which also means they operate on key with sequence ID and type.
This change will enable potential future optimizations but for now InternalIterator's functions are still the same as Iterator's.
At the same time, separate the cleanup function to a separate class and let both of InternalIterator and Iterator inherit from it.
Test Plan: Run all existing tests.
Reviewers: igor, yhchiang, anthony, kradhakrishnan, IslamAbdelRahman, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48549
Summary:
Refactoring NewTableReader to accept TableReaderOptions
This will make it easier to add new options in the future, for example in this diff https://reviews.facebook.net/D46071
Test Plan: run existing tests
Reviewers: igor, yhchiang, anthony, rven, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D46179
Summary: TableCache::Get() puts parameters in the wrong places so that table readers created by Get() will not have the histogram updated.
Test Plan: Will write a unit test for that.
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D46035
Summary:
ReadaheadRandomAccessFile acts as a transparent layer on top of RandomAccessFile. When a Read() request is issued, it issues a much bigger request to the OS and caches the result. When a new request comes in and we already have the data cached, it doesn't have to issue any requests to the OS.
We add ReadaheadRandomAccessFile layer only when file is read during compactions.
D45105 was incorrectly closed by Phabricator because I committed it to a separate branch (not master), so I'm resubmitting the diff.
Test Plan: make check
Reviewers: MarkCallaghan, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D45123
Summary:
DBTest.GetProperty was failing occasionally (see task #8131266). The reason was
that the test closed the database before the compaction was done. When the test
reopened the database, RocksDB would schedule a compaction which in turn
created table readers and lead the test to fail the assertion that
rocksdb.estimate-table-readers-mem is 0. In most cases, GetIntProperty() of
rocksdb.estimate-table-readers-mem happened before the compaction created the
table readers, hiding the problem. This patch changes the
WaitForFlushMemTable() to WaitForCompact(). WaitForFlushMemTable() is not
necessary because it is already being called a couple of lines before without
any insertions in-between.
Test Plan:
Insert `usleep(10000);` just after `Reopen(options);` on line 2333 to make the issue more likely, then run:
make db_test && while ./db_test --gtest_filter=DBTest.GetProperty; do true; done
Reviewers: rven, yhchiang, anthony, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45603
Summary: Currently compaction inputs share the same file descriptor and table reader as other foreground threads. It makes fadvise works less predictable. Add options.new_table_reader_for_compaction_inputs to enforce to create a new file descriptor and new table reader for it.
Test Plan: Add the option.
Reviewers: rven, anthony, kradhakrishnan, IslamAbdelRahman, igor, yhchiang
Reviewed By: igor
Subscribers: igor, MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43311
Summary: In internal stats, remember read latency histogram, if statistics is enabled. It can be retrieved from DB::GetProperty() with "rocksdb.dbstats" property, if it is enabled.
Test Plan: Manually run db_bench and prints out "rocksdb.dbstats" by hand and make sure it prints out as expected
Reviewers: igor, IslamAbdelRahman, rven, kradhakrishnan, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D44193
Summary: Measure read latency histogram and put in statistics. Compaction inputs are excluded from it when possible (unfortunately usually no possible as we usually take table reader from table cache.
Test Plan:
Run db_bench and it shows the stats, like:
rocksdb.sst.read.micros statistics Percentiles :=> 50 : 1.238522 95 : 2.529740 99 : 3.912180
Reviewers: kradhakrishnan, rven, anthony, IslamAbdelRahman, MarkCallaghan, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43275
Summary: We want to keep Env a think layer for better portability. Less platform dependent codes should be moved out of Env. In this patch, I create a wrapper of file readers and writers, and put rate limiting, write buffering, as well as most perf context instrumentation and random kill out of Env. It will make it easier to maintain multiple Env in the future.
Test Plan: Run all existing unit tests.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42321
Summary: Add a perf context counter to help users figure out time spent on reading indexes and bloom filter blocks.
Test Plan: Will write a unit test
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D41433
Summary:
Implementation of a table-level row cache.
It only caches point queries done through the `DB::Get` interface, queries done through the `Iterator` interface will completely skip the cache.
Supports snapshots and merge operations.
Test Plan: Ran `make valgrind_check commit-prereq`
Reviewers: igor, philipp, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D39849
Summary:
This diff replaces BlockBasedTable in flush_job_test with TableMock, making it depend on less things and making it closer to an unit test than integration test.
It also introduces a framework to compile mock classes -- Any file named *mock.cc will not be compiled into the build. It will only get compiled into the tests. What way we can mock out most other classes, Version, VersionSet, DBImpl, etc.
Test Plan: flush_job_test
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27681
Summary:
Intead of passing callback function pointer and its arg on Table::Get()
interface, passing GetContext. This makes the interface cleaner and
possible better perf. Also adding a fast pass for SaveValue()
Test Plan: make all check
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D24057
Summary:
As a preparation to support updating some options dynamically, I'd like
to first introduce ImmutableOptions, which is a subset of Options that
cannot be changed during the course of a DB lifetime without restart.
ColumnFamily will keep both Options and ImmutableOptions. Any component
below ColumnFamily should only take ImmutableOptions in their
constructor. Other options should be taken from APIs, which will be
allowed to adjust dynamically.
I am yet to make changes to memtable and other related classes to take
ImmutableOptions in their ctor. That can be done in a seprate diff as
this one is already pretty big.
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D22545
Summary:
Add a DB Property "rocksdb.estimate-table-readers-mem" to return estimated memory usage by all loaded table readers, other than allocated from block cache.
Refactor the property codes to allow getting property from a version, with DB mutex not acquired.
Test Plan: Add several checks of this new property in existing codes for various cases.
Reviewers: yhchiang, ljin
Reviewed By: ljin
Subscribers: xjin, igor, leveldb
Differential Revision: https://reviews.facebook.net/D20733
Summary:
In this patch, we allow RocksDB to support multiple DB paths internally.
No user interface is supported yet so this patch is silent to users.
Test Plan: make all check
Reviewers: igor, haobo, ljin, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18921
Summary:
As discussed in our internal group, we don't get much use of seek compaction at the moment, while it's making code more complicated and slower in some cases.
This diff removes seek compaction and (hopefully) all code that was introduced to support seek compaction.
There is one test case that relied on didIO information. I'll try to find another way to implement it.
Test Plan: make check
Reviewers: sdong, haobo, yhchiang, ljin, dhruba
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19161
Summary:
We added multiple fields to FileMetaData recently and are planning to add more.
This refactoring separate the minimum information for accessing the file. This object is copyable (FileMetaData is not copyable since the ref counter). I hope this refactoring can enable further improvements:
(1) use it to design a more efficient data structure to speed up read queries.
(2) in the future, when we add information of storage level, we can easily do the encoding, instead of enlarge this structure, which might expand memory work set for file meta data.
The definition is same as current EncodedFileMetaData used in two level iterator, so now the logic in two level iterator is easier to understand.
Test Plan: make all check
Reviewers: haobo, igor, ljin
Reviewed By: ljin
Subscribers: leveldb, dhruba, yhchiang
Differential Revision: https://reviews.facebook.net/D18933
Summary:
In this patch, try to allocate the whole iterator tree starting from DBIter from an arena
1. ArenaWrappedDBIter is created when serves as the entry point of an iterator tree, with an arena in it.
2. Add an option to create iterator from arena for following iterators: DBIter, MergingIterator, MemtableIterator, all mem table's iterators, all table reader's iterators and two level iterator.
3. MergeIteratorBuilder is created to incrementally build the tree of internal iterators. It is passed to mem table list and version set and add iterators to it.
Limitations:
(1) Only DB::NewIterator() without tailing uses the arena. Other cases, including readonly DB and compactions are still from malloc
(2) Two level iterator itself is allocated in arena, but not iterators inside it.
Test Plan: make all check
Reviewers: ljin, haobo
Reviewed By: haobo
Subscribers: leveldb, dhruba, yhchiang, igor
Differential Revision: https://reviews.facebook.net/D18513
Summary:
As a follow-up diff for https://reviews.facebook.net/D17805, add
optimization to check PrefixMayMatch on Seek()
Test Plan: make all check
Reviewers: igor, haobo, sdong, yhchiang, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17853
Summary:
also add an override option total_order_iteration if you want to use full
iterator with prefix_extractor
Test Plan: make all check
Reviewers: igor, haobo, sdong, yhchiang
Reviewed By: haobo
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D17805
Summary:
D17961 has two bugs:
(1) two level iterator fails to populate FileMetaData.table_reader, causing performance regression.
(2) table cache handle the !status.ok() case in the wrong place, causing seg fault which shouldn't happen.
Test Plan: make all check
Reviewers: ljin, igor, haobo
Reviewed By: ljin
CC: yhchiang, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D17991
Summary:
One of our profilings shows that Version::Get() sometimes is slow when getting pointer of user comparators or other global objects. In this patch:
(1) we keep pointers of immutable objects in Version to avoid accesses them though option objects or cfd objects
(2) table_reader is directly cached in FileMetaData so that table cache don't have to go through handle first to fetch it
(3) If level 0 has less than 3 files, skip the filtering logic based on SST tables' key range. Smallest and largest key are stored in separated memory locations, which has potential cache misses
Test Plan: make all check
Reviewers: haobo, ljin
Reviewed By: haobo
CC: igor, yhchiang, nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D17739
Summary:
This is the part that was not finished when doing the Options.max_num_files=-1 feature. For iterating non level0 SST files (which was done using two level iterator), table cache is not bypassed. With this patch, the leftover feature is done.
Test Plan: make all check; change Options.max_num_files=-1 in one of the tests to cover the codes.
Reviewers: haobo, igor, dhruba, ljin, yhchiang
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17001
Summary: Provide a public API for users to access the table properties for each SSTable.
Test Plan: Added a unit tests to test the function correctness under differnet conditions.
Reviewers: haobo, dhruba, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16083
Summary:
Lots of code expects Options on construction/function call. My original idea was to split Options argument into ColumnFamilyOptions and DBOptions (the latter only if needed). However, this will require huge code changes very deep in the stack.
The better idea is to have ColumnFamilyData hold both ColumnFamilyOptions and Options. ColumnFamilyData::Options would be constructed from DBOptions (same for each column family) and ColumnFamilyOptions (different for each column family)
Now when we construct a class or call any method that requires Options, we can just push him ColumnFamilyData::Options and be sure that it's using column-family-specific settings.
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15927
Summary:
Adapting table cache to column families is interesting. We want table cache to be global LRU, so if some column families are use not as often as others, we want them to be evicted from cache. However, current TableCache object also constructs tables on its own. If table is not found in the cache, TableCache automatically creates new table. We want each column family to be able to specify different table factory.
To solve the problem, we still have a single LRU, but we provide the LRUCache object to TableCache on construction. We have one TableCache per column family, but the underyling cache is shared by all TableCache objects.
This allows us to have a global LRU, but still be able to support different table factories for different column families. Also, in the future it will also be able to support different directories for different column families.
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15915
Summary: In PlainTable, use one single byte to represent 8 bytes of internal bytes, if seqID = 0 and it is value type (which should be common for bottom most files). It is to save 7 bytes for uncompressed cases.
Test Plan: make all check
Reviewers: haobo, dhruba, kailiu
Reviewed By: haobo
CC: igor, leveldb
Differential Revision: https://reviews.facebook.net/D15489
Summary:
In some use cases, table readers for all live files should always be cached. In that case, there will be an opportunity to avoid the table cache look-up while Get() and NewIterator().
We define options.max_open_files = -1 to be the mode that table readers for live files will always be kept. In that mode, table readers are cached in FileMetaData (with a reference count hold in table cache). So that when executing table_cache.Get() and table_cache.newInterator(), LRU cache checking can be by-passed, to reduce latency.
Test Plan: add a test case in db_test
Reviewers: haobo, kailiu
Reviewed By: haobo
CC: dhruba, igor, leveldb
Differential Revision: https://reviews.facebook.net/D15039
Summary: I'm not sure what's the purpose of encoding file number to a new buffer for looking up the table cache. It seems to be unnecessary to me. With this patch, we point the lookup key to the address of the int64 of the file number.
Test Plan: make all check
Reviewers: dhruba, haobo, igor, kailiu
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14811
Summary: liveness of the statistics object is already ensured by the shared pointer in DB options. There's no reason to pass again shared pointer among internal functions. Raw pointer is sufficient and efficient.
Test Plan: make check
Reviewers: dhruba, MarkCallaghan, igor
Reviewed By: dhruba
CC: leveldb, reconnect.grayhat
Differential Revision: https://reviews.facebook.net/D14289
Summary:
This patch is to address @haobo's comments on D13521:
1. rename Table to be TableReader and make its factory function to be GetTableReader
2. move the compression type selection logic out of TableBuilder but to compaction logic
3. more accurate comments
4. Move stat name constants into BlockBasedTable implementation.
5. remove some uncleaned codes in simple_table_db_test
Test Plan: pass test suites.
Reviewers: haobo, dhruba, kailiu
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13785
