Summary:
A simple CLI which calles DB->CompactRange()
Can take String key's as range.
Test Plan:
Inserted data into a table.
Waited for a minute, used compact tool on it. File modification time's
changed so Compact did something on the files.
Existing unit tests work.
Reviewers: heyongqiang, dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D5697
Summary:
as subject. This diff should be good for benchmarking.
will send another diff to make it better in the case the seek compaction is enable.
In that coming diff, will not count a seek if the bloomfilter filters.
Test Plan: build
Reviewers: dhruba, MarkCallaghan
Reviewed By: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D5481
Summary:
as subject. this can be used for benchmarking.
If we want it for some cases, we can do more changes to make this part of the option.
Test Plan: db_test
Reviewers: dhruba
CC: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D5451
Summary:
FLAGS_cache_size is a long, no need to scan %lld into a size_t
for it (which generates a compiler warning)
Test Plan: run db_bench
Reviewers: dhruba, heyongqiang
Reviewed By: heyongqiang
CC: heyongqiang
Differential Revision: https://reviews.facebook.net/D5427
Summary:
This adds an option to db_bench to specify the compression algorithm to
use for LevelDB
Test Plan: ran db_bench
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D5421
Summary:
Ability to switch off filesystem read-aheads. This change is
backward-compatible: the default setting is to allow file
system read-aheads.
Test Plan: run benchmarks
Reviewers: heyongqiang, adsharma
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5391
Summary: Enable db_bench to specify block size.
Test Plan: compile and run
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5373
Summary: If none of reads or writes are specified by user, then pick the FLAGS_NUM as the number of iterations in the ReadRandomWriteRandom test. If either reads or writes are defined, then use their maximum.
Test Plan: run benchmark
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5217
Summary:
This patch enables the db_bench benchmark to issue both random reads and random writes at the same time. This options can be trigged via
./db_bench --benchmarks=readrandomwriterandom
The default percetage of reads is 90.
One can change the percentage of reads by specifying the --readwritepercent.
./db_bench --benchmarks=readrandomwriterandom=50
This is a feature request from Jeffro asking for leveldb performance with a 90:10 read:write ratio.
Test Plan: run on test machine.
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5067
Summary:
The numbers of shards that the block cache is divided into is
configurable. However, if the user specifies that he/she wants
the block cache to be divided into more than 2**20 pieces, then
the system will rey to allocate a huge array of that size) that
could fail.
It is better to limit the sharding of the block cache to an
upper bound. The default sharding is 16 shards (i.e. 2**4)
and the maximum is now 2 million shards (i.e. 2**20).
Also, fixed a bug with the LRUCache where the numShardBits
should be a private member of the LRUCache object rather than
a static variable.
Test Plan:
run db_bench with --cache_numshardbits=64.
Task ID: #
Blame Rev:
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D5013
Summary:
Introduce a new method Env->Fsync() that issues fsync (instead of fdatasync).
This is needed for data durability when running on ext3 filesystems.
Added options to the benchmark db_bench to generate performance numbers
with either fsync or fdatasync enabled.
Cleaned up Makefile to build leveldb_shell only when building the thrift
leveldb server.
Test Plan: build and run benchmark
Reviewers: heyongqiang
Reviewed By: heyongqiang
Differential Revision: https://reviews.facebook.net/D4911
Summary:
Added option --writes=xxx to specify the number of keys that we want to overwrite in the benchmark.
Task ID: #
Blame Rev:
Test Plan: Revert Plan:
Reviewers: adsharma
CC: sc
Differential Revision: https://reviews.facebook.net/D3465
Summary:
The db_bench test was not using the specified value for the max-file-open. Fixed.
The fs readhead is switched off.
Gather statistics about the table cache and print it out at the end of the tets run.
Test Plan: Revert Plan:
Reviewers: adsharma, sc
Reviewed By: adsharma
Differential Revision: https://reviews.facebook.net/D3441
In particular, we add a new FilterPolicy class. An instance
of this class can be supplied in Options when opening a
database. If supplied, the instance is used to generate
summaries of keys (e.g., a bloom filter) which are placed in
sstables. These summaries are consulted by DB::Get() so we
can avoid reading sstable blocks that are guaranteed to not
contain the key we are looking for.
This change provides one implementation of FilterPolicy
based on bloom filters.
Other changes:
- Updated version number to 1.4.
- Some build tweaks.
- C binding for CompactRange.
- A few more benchmarks: deleteseq, deleterandom, readmissing, seekrandom.
- Minor .gitignore update.
- Replace raw slice comparison with a call to user comparator.
Added test for custom comparators.
- Fix end of namespace comments.
- Fixed bug in picking inputs for a level-0 compaction.
When finding overlapping files, the covered range may expand
as files are added to the input set. We now correctly expand
the range when this happens instead of continuing to use the
old range. For example, suppose L0 contains files with the
following ranges:
F1: a .. d
F2: c .. g
F3: f .. j
and the initial compaction target is F3. We used to search
for range f..j which yielded {F2,F3}. However we now expand
the range as soon as another file is added. In this case,
when F2 is added, we expand the range to c..j and restart the
search. That picks up file F1 as well.
This change fixes a bug related to deleted keys showing up
incorrectly after a compaction as described in Issue 44.
(Sync with upstream @25072954)
- Added DB::CompactRange() method.
Changed manual compaction code so it breaks up compactions of
big ranges into smaller compactions.
Changed the code that pushes the output of memtable compactions
to higher levels to obey the grandparent constraint: i.e., we
must never have a single file in level L that overlaps too
much data in level L+1 (to avoid very expensive L-1 compactions).
Added code to pretty-print internal keys.
- Fixed bug where we would not detect overlap with files in
level-0 because we were incorrectly using binary search
on an array of files with overlapping ranges.
Added "leveldb.sstables" property that can be used to dump
all of the sstables and ranges that make up the db state.
- Removing post_write_snapshot support. Email to leveldb mailing
list brought up no users, just confusion from one person about
what it meant.
- Fixing static_cast char to unsigned on BIG_ENDIAN platforms.
Fixes Issue 35 and Issue 36.
- Comment clarification to address leveldb Issue 37.
- Change license in posix_logger.h to match other files.
- A build problem where uint32 was used instead of uint32_t.
Sync with upstream @24408625
- Fix bug in Get: when it triggers a compaction, it could sometimes
mark the compaction with the wrong level (if there was a gap
in the set of levels examined for the Get).
- Do not hold mutex while writing to the log file or to the
MANIFEST file.
Added a new benchmark that runs a writer thread concurrently with
reader threads.
Percentiles
------------------------------
micros/op: avg median 99 99.9 99.99 99.999 max
------------------------------------------------------
before: 42 38 110 225 32000 42000 48000
after: 24 20 55 65 130 1100 7000
- Fixed race in optimized Get. It should have been using the
pinned memtables, not the current memtables.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@50 62dab493-f737-651d-591e-8d6aee1b9529
- Fix for issue 33 (non-null-terminated result from
leveldb_property_value())
- Support for running multiple instances of a benchmark in parallel.
- Reduce lock contention on Get():
(1) Do not hold the lock while searching memtables.
(2) Shard block and table caches 16-ways.
Benchmark for evaluating this change:
$ db_bench --benchmarks=fillseq1,readrandom --threads=$n
(fillseq1 is a small hack to make sure fillseq runs once regardless
of number of threads specified on the command line).
git-svn-id: https://leveldb.googlecode.com/svn/trunk@49 62dab493-f737-651d-591e-8d6aee1b9529
- Removed one copy of an uncompressed block contents changing
the signature of Snappy_Uncompress() so it uncompresses into a
flat array instead of a std::string.
Speeds up readrandom ~10%.
- Instead of a combination of Env/WritableFile, we now have a
Logger interface that can be easily overridden applications
that want to supply their own logging.
- Separated out the gcc and Sun Studio parts of atomic_pointer.h
so we can use 'asm', 'volatile' keywords for Sun Studio.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@39 62dab493-f737-651d-591e-8d6aee1b9529
- Implemented Get() directly instead of building on top of a full
merging iterator stack. This speeds up the "readrandom" benchmark
by up to 15-30%.
- Fixed an opensource compilation problem.
Added --db=<name> flag to control where the database is placed.
- Automatically compact a file when we have done enough
overlapping seeks to that file.
- Fixed a performance bug where we would read from at least one
file in a level even if none of the files overlapped the key
being read.
- Makefile fix for Mac OSX installations that have XCode 4 without XCode 3.
- Unified the two occurrences of binary search in a file-list
into one routine.
- Found and fixed a bug where we would unnecessarily search the
last file when looking for a key larger than all data in the
level.
- A fix to avoid the need for trivial move compactions and
therefore gets rid of two out of five syncs in "fillseq".
- Removed the MANIFEST file write when switching to a new
memtable/log-file for a 10-20% improvement on fill speed on ext4.
- Adding a SNAPPY setting in the Makefile for folks who have
Snappy installed. Snappy compresses values and speeds up writes.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@32 62dab493-f737-651d-591e-8d6aee1b9529
* Patch LevelDB to build for OSX and iOS
* Fix race condition in memtable iterator deletion.
* Other small fixes.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@29 62dab493-f737-651d-591e-8d6aee1b9529
* env_chromium.cc should not export symbols.
* Fix MSVC warnings.
* Removed large value support.
* Fix broken reference to documentation file
git-svn-id: https://leveldb.googlecode.com/svn/trunk@24 62dab493-f737-651d-591e-8d6aee1b9529
