Summary:
This is a part of effort to reduce the size of db_test.cc. We move the following tests to a separate file `db_io_failure_test.cc`:
* DropWrites
* DropWritesFlush
* NoSpaceCompactRange
* NonWritableFileSystem
* ManifestWriteError
* PutFailsParanoid
Test Plan: Run `make check` to see if the tests are working properly.
Reviewers: sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58341
Summary: Currently we estimate bytes needed for compaction by assuming fanout value to be level multiplier. It overestimates when size of a level exceeds the target by large. We estimate by the ratio of actual sizes in levels instead.
Test Plan: Fix existing test cases and add a new one.
Reviewers: IslamAbdelRahman, igor, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57789
Summary: Added EventListener::OnTableFileCreationStarted. EventListener::OnTableFileCreated will be called on failure case. User can check creation status via TableFileCreationInfo::status.
Test Plan: unit test.
Reviewers: dhruba, yhchiang, ott, sdong
Reviewed By: sdong
Subscribers: sdong, kradhakrishnan, IslamAbdelRahman, andrewkr, yhchiang, leveldb, ott, dhruba
Differential Revision: https://reviews.facebook.net/D56337
Summary:
This adds a new metablock containing a shared dictionary that is used
to compress all data blocks in the SST file. The size of the shared dictionary
is configurable in CompressionOptions and defaults to 0. It's currently only
used for zlib/lz4/lz4hc, but the block will be stored in the SST regardless of
the compression type if the user chooses a nonzero dictionary size.
During compaction, computes the dictionary by randomly sampling the first
output file in each subcompaction. It pre-computes the intervals to sample
by assuming the output file will have the maximum allowable length. In case
the file is smaller, some of the pre-computed sampling intervals can be beyond
end-of-file, in which case we skip over those samples and the dictionary will
be a bit smaller. After the dictionary is generated using the first file in a
subcompaction, it is loaded into the compression library before writing each
block in each subsequent file of that subcompaction.
On the read path, gets the dictionary from the metablock, if it exists. Then,
loads that dictionary into the compression library before reading each block.
Test Plan: new unit test
Reviewers: yhchiang, IslamAbdelRahman, cyan, sdong
Reviewed By: sdong
Subscribers: andrewkr, yoshinorim, kradhakrishnan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52287
Summary: CompactedDB skips memtable. So we shouldn't use compacted DB if there is outstanding WAL files.
Test Plan: Change to options.max_open_files = -1 perf context test to create a compacted DB, which we shouldn't do.
Reviewers: yhchiang, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57057
Comparable with Snappy on comp ratio.
Implemented using Windows API, does not require external package.
Avaiable since Windows 8 and server 2012.
Use -DXPRESS=1 with CMake to enable.
Summary: In DBTest.HardLimit, multiple flushes may merge into one, based on thread scheduling. Avoid it by waiting each flush to finish before generating the next one.
Test Plan: Run test in parallel several times and see it doesn't fail any more.
Reviewers: yhchiang, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yiwu, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56853
Summary: The code assumes that if use_mmap_reads is on then use_os_buffer is also on. This make sense as by using memory mapped files for reading you are expecting the OS to cache what it needs. Add code to make sure the user does not turn off use_os_buffer when they turn on use_mmap_reads
Test Plan: New test: DBTest.MMapAndBufferOptions
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56397
Summary: Change some RocksDB default options to make it more friendly to server workloads.
Test Plan: Run all existing tests
Reviewers: yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: sumeet, muthu, benj, MarkCallaghan, igor, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55941
Test Plan: make -j40 check OPT=-g, on both /tmp and /dev/shm
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55701
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
When the table reader is destroyed, it releases the pinned blocks (if there were any). This has to happen before the cache is destroyed, so I had to introduce a TableReader::Close(), to guarantee the order of destruction.
Test Plan:
Added two unit tests for this. Existing unit tests run fine (default is pin_l0_filter_and_index_blocks_in_cache=false).
DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32
Mac: OK.
Linux: with D55287 patched in it's OK.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54801
Summary:
In some situations the DB will scan all existing files in the DB path and delete the ones that are Obsolete.
If this happen during adding an external sst file. this could cause the file to be deleted while we are adding it.
This diff fix this issue
Test Plan:
unit test to reproduce the bug
existing unit tests
Reviewers: sdong, yhchiang, andrewkr
Reviewed By: andrewkr
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D54627
Summary:
Add Iterator::GetProperty(), a way for users to communicate with iterator, and turn Iterator::IsKeyPinned() with it.
As a follow-up, I'll ask a property as the version number attached to the iterator
Test Plan: Rerun existing tests and add a negative test case.
Reviewers: yhchiang, andrewkr, kradhakrishnan, anthony, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54783
Summary:
Introude SstFileManager::SetMaxAllowedSpaceUsage() that can be used to limit the maximum space usage allowed for RocksDB.
When this limit is exceeded WriteImpl() will fail and return Status::Aborted()
Test Plan: unit testing
Reviewers: yhchiang, anthony, andrewkr, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53763
Summary:
Add kSstFileTier to ReadTier, which allows Get and MultiGet to
read only directly from SST files and skip mem-tables.
kSstFileTier = 0x2 // data in SST files.
// Note that this ReadTier currently only supports
// Get and MultiGet and does not support iterators.
Test Plan: add new test in db_test.
Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: igor, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53511
Summary: Previous commit introduces a test that is not supported in LITE. Fix it.
Test Plan: Build the test with ROCKSDB_LITE.
Reviewers: kradhakrishnan, IslamAbdelRahman, anthony, yhchiang, andrewkr
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53901
Summary: If users turn on concurrent insert but the memtable doesn't support it, they might see unexcepted crash. Fix it by explicitly fail.
Test Plan:
Run different setting of stress_test and make sure it fails correctly.
Will add a unit test too.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, andrewkr, ngbronson
Reviewed By: ngbronson
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53895
Summary:
copy from task 8196669:
1) Optimistic transactions do not support batching writes from different threads.
2) Pessimistic transactions do not support batching writes if an expiration time is set.
In these 2 cases, we currently do not do any write batching in DBImpl::WriteImpl() because there is a WriteCallback that could decide at the last minute to abort the write. But we could support batching write operations with callbacks if we make sure to process the callbacks correctly.
To do this, we would first need to modify write_thread.cc to stop preventing writes with callbacks from being batched together. Then we would need to change DBImpl::WriteImpl() to call all WriteCallback's in a batch, only write the batches that succeed, and correctly set the state of each batch's WriteThread::Writer.
Test Plan: Added test WriteWithCallbackTest to write_callback_test.cc which creates multiple client threads and verifies that writes are batched and executed properly.
Reviewers: hermanlee4, anthony, ngbronson
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52863
Summary: Add a new option to BlockBasedTableOptions that will allow us to change the restart interval for the index block
Test Plan: unit tests
Reviewers: yhchiang, anthony, andrewkr, sdong
Reviewed By: sdong
Subscribers: march, dhruba
Differential Revision: https://reviews.facebook.net/D53721
Summary:
Add unit tests:
(1) insert entries of 8MB key and 3GB value to DB
(2) insert entry of 3GB key and 3GB value into write batch and make sure we can read it.
(3) insert 3 billions of key-value pairs into write batch and make sure we can read it.
Disable them because not all platform can run it.
Test Plan: Run the tests
Reviewers: IslamAbdelRahman, yhchiang, kradhakrishnan, andrewkr, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53619
Summary:
Add a new class SstFileTracker that will be notified whenever a DB add/delete/move and sst file, it will also replace DeleteScheduler
SstFileTracker can be used later to abort writes when we exceed a specific size
Test Plan: unit tests
Reviewers: rven, anthony, yhchiang, sdong
Reviewed By: sdong
Subscribers: igor, lovro, march, dhruba
Differential Revision: https://reviews.facebook.net/D50469
Summary: Measuring mutex duration will measure time inside DB mutex, which breaks our best practice. Add a stat level in Statistics class. By default, disable to measure the mutex operations.
Test Plan: Add a unit test to make sure it is off by default.
Reviewers: rven, anthony, IslamAbdelRahman, kradhakrishnan, andrewkr, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53367
Summary: Similar to D53385 we need to check InDomain before checking the filter block.
Test Plan: unit tests
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53421
Summary:
NewMemEnv() is defined in rocksdb lite but just returns nullptr --
would it be better to just not define it so we can catch issues like this at
compile-time?
Test Plan:
$ make clean && OPT="-DTRAVIS -DROCKSDB_LITE" V=1 make -j32 db_test
$ ./db_test --gtest_filter='DBTest.MemEnvTest'
...
[ PASSED ] 0 tests.
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53427
Summary:
Right now when we are creating a BlockBasedTable with fill filter block
we add to the filter all the prefixes that are InDomain() based on the prefix_extractor
the problem is that when we read a key from the file, we check the filter block for the prefix whether or not it's InDomain()
Test Plan: unit tests
Reviewers: yhchiang, rven, anthony, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53385
Summary: Break down DBTest.Randomized to multiple gtest tests based on config type
Test Plan: Run the test and all tests. Make sure configurations are correctly set
Reviewers: yhchiang, IslamAbdelRahman, rven, kradhakrishnan, andrewkr, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53247
Summary:
SstFileWriter may create an sst file with no entries
Right now this will fail when being ingested using DB::AddFile() saying that the keys are corrupted
Test Plan: make check
Reviewers: yhchiang, rven, anthony, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D52815
Summary: Improve testing per discussion in D52989
Test Plan: ran test
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53211
Summary:
Moved all the tests that verify property correctness into a separate
file. The goal is to reduce compile time and complexity of db_test. I didn't
add parallelism for db_properties_test, even though these tests were
parallelized in db_test, since the file is small enough that it won't matter.
Some of these moves may be controversial since it's hard to say whether the
test is "verifying property correctness," or "using properties to verify
rocksdb's correctness." I'm interested in any opinions.
Test Plan: ran db_properties_test, also waiting on "make commit-prereq -j32"
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52995
Makefile adjust paths for solaris build
Makefile enable _GLIBCXX_USE_C99 so that std::to_string is available
db_compaction_test.cc Initialise a variable to avoid a compilation error
db_impl.cc Include <alloca.h>
db_test.cc Include <alloca.h>
Environment.java recognise solaris envrionment
options_bulder.cc Make log unambiguous
geodb_impl.cc Make log and floor unambiguous
Summary: Make sure SleepingTask has bene run before it goes out of scope.
Test Plan: run test
Reviewers: kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52581
Summary:
myrocks seems to build rocksdb using
-Wmissing-field-initializers (and treats warnings as errors). This diff
adds that flag to the rocksdb build, and fixes the compilation failures
that result. I have not checked for any other differences in the build
flags for rocksdb build as part of myrocks.
Test Plan: make check
Reviewers: sdong, rven
Reviewed By: rven
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D52443
Summary: DBTest.HardLimit fails in appveyor build. Use special mem table to make the test behavior depends less on platform
Test Plan: Run the test with JEMALLOC both on and off.
Reviewers: yhchiang, kradhakrishnan, rven, anthony, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52317
