Commit Graph

32 Commits

Author SHA1 Message Date
Yi Wu
1f9d7c0f54 Fix OnFlushCompleted fired before flush result write to MANIFEST (#5908)
Summary:
When there are concurrent flush job on the same CF, `OnFlushCompleted` can be called before the flush result being install to LSM. Fixing the issue by passing `FlushJobInfo` through `MemTable`, and the thread who commit the flush result can fetch the `FlushJobInfo` and fire `OnFlushCompleted` on behave of the thread actually writing the SST.

Fix https://github.com/facebook/rocksdb/issues/5892
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5908

Test Plan: Add new test. The test will fail without the fix.

Differential Revision: D17916144

Pulled By: riversand963

fbshipit-source-id: e18df67d9533b5baee52ae3605026cdeb05cbe10
2019-10-16 10:40:23 -07:00
Zhongyi Xie
2f41ecfe75 Refactor trimming logic for immutable memtables (#5022)
Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022

Differential Revision: D14394062

Pulled By: miasantreble

fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
2019-08-23 13:55:34 -07:00
haoyuhuang
bb4178066d Integrate block cache tracer into db_impl (#5433)
Summary:
This PR integrates the block cache tracer class into db_impl.cc.
db_impl.cc contains a member variable of AtomicBlockCacheTraceWriter class and passes its reference to the block_based_table_reader.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5433

Differential Revision: D15728016

Pulled By: HaoyuHuang

fbshipit-source-id: 23d5659e8c82d556833dcc1a5558aac8c1f7db71
2019-06-13 15:43:10 -07:00
Siying Dong
8843129ece Move some memory related files from util/ to memory/ (#5382)
Summary:
Move arena, allocator, and memory tools under util to a separate memory/ directory.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5382

Differential Revision: D15564655

Pulled By: siying

fbshipit-source-id: 9cd6b5d0d3d52b39606e19221fa154596e5852a5
2019-05-30 17:44:09 -07:00
Siying Dong
e9e0101ca4 Move test related files under util/ to test_util/ (#5377)
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377

Differential Revision: D15551366

Pulled By: siying

fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
2019-05-30 11:25:51 -07:00
Michael Liu
ca89ac2ba9 Apply modernize-use-override (2nd iteration)
Summary:
Use C++11’s override and remove virtual where applicable.
Change are automatically generated.

Reviewed By: Orvid

Differential Revision: D14090024

fbshipit-source-id: 1e9432e87d2657e1ff0028e15370a85d1739ba2a
2019-02-14 14:41:36 -08:00
Yanqin Jin
842cdc11dd Use correct FileMeta for atomic flush result install (#4932)
Summary:
1. this commit fixes our handling of a combination of two separate edge
cases. If a flush job does not pick any memtable to flush (because another
flush job has already picked the same memtables), and the column family
assigned to the flush job is dropped right before RocksDB calls
rocksdb::InstallMemtableAtomicFlushResults, our original code passes
a FileMetaData object whose file number is 0, failing the assertion in
rocksdb::InstallMemtableAtomicFlushResults (assert(m->GetFileNumber() > 0)).
2. Also piggyback a small change: since we already create a local copy of column family's mutable CF options to eliminate potential race condition with `SetOptions` call, we might as well use the local copy in other function calls in the same scope.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4932

Differential Revision: D13901322

Pulled By: riversand963

fbshipit-source-id: b936580af7c127ea0c6c19ea10cd5fcede9fb0f9
2019-01-31 14:49:51 -08:00
Yanqin Jin
a07175af65 Refactor atomic flush result installation to MANIFEST (#4791)
Summary:
as titled.
Since different bg flush threads can flush different sets of column families
(due to column family creation and drop), we decide not to let one thread
perform atomic flush result installation for other threads. Bg flush threads
will install their atomic flush results sequentially to MANIFEST, using
a conditional variable, i.e. atomic_flush_install_cv_ to coordinate.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4791

Differential Revision: D13498930

Pulled By: riversand963

fbshipit-source-id: dd7482fc41f4bd22dad1e1ef7d4764ef424688d7
2019-01-03 20:56:24 -08:00
Abhishek Madan
81b6b09f6b Remove v1 RangeDelAggregator (#4778)
Summary:
Now that v2 is fully functional, the v1 aggregator is removed.
The v2 aggregator has been renamed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4778

Differential Revision: D13495930

Pulled By: abhimadan

fbshipit-source-id: 9d69500a60a283e79b6c4fa938fc68a8aa4d40d6
2018-12-17 17:33:46 -08:00
Sagar Vemuri
dc3528077a Update all unique/shared_ptr instances to be qualified with namespace std (#4638)
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638

Differential Revision: D12934992

Pulled By: sagar0

fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
2018-11-09 11:19:58 -08:00
Abhishek Madan
8c78348c77 Use only "local" range tombstones during Get (#4449)
Summary:
Previously, range tombstones were accumulated from every level, which
was necessary if a range tombstone in a higher level covered a key in a lower
level. However, RangeDelAggregator::AddTombstones's complexity is based on
the number of tombstones that are currently stored in it, which is wasteful in
the Get case, where we only need to know the highest sequence number of range
tombstones that cover the key from higher levels, and compute the highest covering
sequence number at the current level. This change introduces this optimization, and
removes the use of RangeDelAggregator from the Get path.

In the benchmark results, the following command was used to initialize the database:
```
./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8
```

...and the following command was used to measure read throughput:
```
./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32
```

The filluniquerandom command was only run once, and the resulting database was used
to measure read performance before and after the PR. Both binaries were compiled with
`DEBUG_LEVEL=0`.

Readrandom results before PR:
```
readrandom   :       4.544 micros/op 220090 ops/sec;   16.9 MB/s (63103 of 100000 found)
```

Readrandom results after PR:
```
readrandom   :      11.147 micros/op 89707 ops/sec;    6.9 MB/s (63103 of 100000 found)
```

So it's actually slower right now, but this PR paves the way for future optimizations (see #4493).

----
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449

Differential Revision: D10370575

Pulled By: abhimadan

fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
2018-10-24 12:31:12 -07:00
Yanqin Jin
e633983cf1 Add support to flush multiple CFs atomically (#4262)
Summary:
Leverage existing `FlushJob` to implement atomic flush of multiple column families.

This PR depends on other PRs and is a subset of #3752 . This PR itself is not sufficient in fulfilling atomic flush.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4262

Differential Revision: D9283109

Pulled By: riversand963

fbshipit-source-id: 65401f913e4160b0a61c0be6cd02adc15dad28ed
2018-10-15 20:01:17 -07:00
Maysam Yabandeh
21b51dfec4 Add inline comments to flush job (#4464)
Summary:
It also renames InstallMemtableFlushResults to MaybeInstallMemtableFlushResults to clarify its contract.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4464

Differential Revision: D10224918

Pulled By: maysamyabandeh

fbshipit-source-id: 04e3f2d8542002cb9f8010cb436f5152751b3cbe
2018-10-05 15:41:17 -07:00
Maysam Yabandeh
8581a93a6b Per-thread unique test db names (#4135)
Summary:
The patch makes sure that two parallel test threads will operate on different db paths. This enables using open source tools such as gtest-parallel to run the tests of a file in parallel.
Example: ``` ~/gtest-parallel/gtest-parallel ./table_test```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4135

Differential Revision: D8846653

Pulled By: maysamyabandeh

fbshipit-source-id: 799bad1abb260e3d346bcb680d2ae207a852ba84
2018-07-13 17:27:39 -07:00
Siying Dong
d59549298f Skip deleted WALs during recovery
Summary:
This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.

Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction)

This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2.
Closes https://github.com/facebook/rocksdb/pull/3765

Differential Revision: D7747618

Pulled By: siying

fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
2018-05-03 15:43:09 -07:00
Siying Dong
3c327ac2d0 Change RocksDB License
Summary: Closes https://github.com/facebook/rocksdb/pull/2589

Differential Revision: D5431502

Pulled By: siying

fbshipit-source-id: 8ebf8c87883daa9daa54b2303d11ce01ab1f6f75
2017-07-15 16:11:23 -07:00
Andrew Kryczka
a4d9c02511 Pass CF ID to MemTableRepFactory
Summary:
Some users want to monitor column family activity in their custom memtable implementations. Previously there was no way to figure out with which column family a memtable is associated. This diff:

- adds an overload to MemTableRepFactory::CreateMemTableRep() that provides the CF ID. For compatibility, its default implementation calls the old overload.
- updates MemTable to create MemTableRep's using the new overload.
Closes https://github.com/facebook/rocksdb/pull/2346

Differential Revision: D5108061

Pulled By: ajkr

fbshipit-source-id: 3a1921214a348dd8ea0f54e1cab3b71c3d46d616
2017-06-02 12:12:06 -07:00
Siying Dong
d616ebea23 Add GPLv2 as an alternative license.
Summary: Closes https://github.com/facebook/rocksdb/pull/2226

Differential Revision: D4967547

Pulled By: siying

fbshipit-source-id: dd3b58ae1e7a106ab6bb6f37ab5c88575b125ab4
2017-04-27 18:06:12 -07:00
Andrew Kryczka
f998c9790f DeleteRange Get support
Summary:
During Get()/MultiGet(), build up a RangeDelAggregator with range
tombstones as we search through live memtable, immutable memtables, and
SST files. This aggregator is then used by memtable.cc's SaveValue() and
GetContext::SaveValue() to check whether keys are covered.

added tests for Get on memtables/files; end-to-end tests mainly in https://reviews.facebook.net/D64761
Closes https://github.com/facebook/rocksdb/pull/1456

Differential Revision: D4111271

Pulled By: ajkr

fbshipit-source-id: 6e388d4
2016-11-03 18:54:20 -07:00
Yi Wu
9ed928e7a9 Split DBOptions into ImmutableDBOptions and MutableDBOptions
Summary: Use ImmutableDBOptions/MutableDBOptions internally and DBOptions only for user-facing APIs. MutableDBOptions is barely a placeholder for now. I'll start to move options to MutableDBOptions in following diffs.

Test Plan:
  make all check

Reviewers: yhchiang, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D64065
2016-09-23 16:34:04 -07:00
Yi Wu
81747f1be6 Refactor MutableCFOptions
Summary:
* Change constructor of MutableCFOptions to depends only on ColumnFamilyOptions.
* Move `max_subcompactions`, `compaction_options_fifo` and `compaction_pri` to ImmutableCFOptions to make it clear that they are immutable.

Test Plan: existing unit tests.

Reviewers: yhchiang, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D63945
2016-09-13 21:11:59 -07:00
sdong
32df9733d1 Add options.write_buffer_manager: control total memtable size across DB instances
Summary: Add option write_buffer_manager to help users control total memory spent on memtables across multiple DB instances.

Test Plan: Add a new unit test.

Reviewers: yhchiang, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: adela, benj, sumeet, muthu, leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D59925
2016-07-05 18:11:25 -07:00
Baraa Hamodi
21e95811d1 Updated all copyright headers to the new format. 2016-02-09 15:12:00 -08:00
Andres Notzli
c465071029 Removing duplicate code
Summary:
While working on https://reviews.facebook.net/D43179 , I found
duplicate code in the tests. This patch removes it.

Test Plan: make clean all check

Reviewers: igor, sdong, rven, anthony, yhchiang

Reviewed By: yhchiang

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D43263
2015-08-05 07:33:27 -07:00
sdong
7842920be5 Slow down writes by bytes written
Summary:
We slow down data into the database to the rate of options.delayed_write_rate (a new option) with this patch.

The thread synchronization approach I take is to still synchronize write controller by DB mutex and GetDelay() is inside DB mutex. Try to minimize the frequency of getting time in GetDelay(). I verified it through db_bench and it seems to work

hard_rate_limit is deprecated.

options.delayed_write_rate is still not dynamically changeable. Need to work on it as a follow-up.

Test Plan: Add new unit tests in db_test

Reviewers: yhchiang, rven, kradhakrishnan, anthony, MarkCallaghan, igor

Reviewed By: igor

Subscribers: ikabiljo, leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D36351
2015-06-11 20:42:18 -07:00
sdong
e409d3d745 Make "make all" work for CYGWIN
Summary: Some test and benchmark codes don't build for CYGWIN. Fix it.

Test Plan: Build "make all" with TARGET_OS=Cygwin on cygwin and make sure it passes.

Reviewers: rven, yhchiang, anthony, igor, kradhakrishnan

Reviewed By: igor, kradhakrishnan

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D39711
2015-06-09 16:36:07 -07:00
agiardullo
dc9d70de65 Optimistic Transactions
Summary: Optimistic transactions supporting begin/commit/rollback semantics.  Currently relies on checking the memtable to determine if there are any collisions at commit time.  Not yet implemented would be a way of enuring the memtable has some minimum amount of history so that we won't fail to commit when the memtable is empty.  You should probably start with transaction.h to get an overview of what is currently supported.

Test Plan: Added a new test, but still need to look into stress testing.

Reviewers: yhchiang, igor, rven, sdong

Reviewed By: sdong

Subscribers: adamretter, MarkCallaghan, leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D33435
2015-05-29 14:36:35 -07:00
agiardullo
c815351038 Support saving history in memtable_list
Summary:
For transactions, we are using the memtables to validate that there are no write conflicts.  But after flushing, we don't have any memtables, and transactions could fail to commit.  So we want to someone keep around some extra history to use for conflict checking.  In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit.

After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure).  It seems like the best place for this is abstracted inside the memtable_list.  I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much.

This diff adds a new parameter to control how much memtable history to keep around after flushing.  However, it sounds like people aren't too fond of adding new parameters.  So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers.  This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit.  (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached).  So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit).

However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions.

Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests.  Added testing in memtablelist_test and planning on adding more testing here.

Reviewers: sdong, rven, igor

Reviewed By: igor

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D37443
2015-05-28 16:34:24 -07:00
Igor Canadi
1bb4928da9 Include bunch of more events into EventLogger
Summary:
Added these events:
* Recovery start, finish and also when recovery creates a file
* Trivial move
* Compaction start, finish and when compaction creates a file
* Flush start, finish

Also includes small fix to EventLogger

Also added option ROCKSDB_PRINT_EVENTS_TO_STDOUT which is useful when we debug things. I've spent far too much time chasing LOG files.

Still didn't get sst table properties in JSON. They are written very deeply into the stack. I'll address in separate diff.

TODO:
* Write specification. Let's first use this for a while and figure out what's good data to put here, too. After that we'll write spec
* Write tools that parse and analyze LOGs. This can be in python or go. Good intern task.

Test Plan: Ran db_bench with ROCKSDB_PRINT_EVENTS_TO_STDOUT. Here's the output: https://phabricator.fb.com/P19811976

Reviewers: sdong, yhchiang, rven, MarkCallaghan, kradhakrishnan, anthony

Reviewed By: anthony

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D37521
2015-04-27 15:20:02 -07:00
agiardullo
753dd1fdd0 Fix valgrind issues in memtable_list_test
Summary: Need to remember to unref MemTableList->current() before deleting.

Test Plan: ran test with valgrind

Reviewers: igor

Reviewed By: igor

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D36855
2015-04-10 14:16:03 -07:00
agiardullo
0feeee6433 Fix memtable_list_test
Summary:
Test failing due to a missing directory caused by a simple bug (did not run into this on my dev box since the path already existed).

We should look into deleting test::TmpDir() before each test run.

Test Plan: ran test

Reviewers: igor, yhchiang, meyering, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D36831
2015-04-09 22:11:35 -07:00
agiardullo
fabc115690 MemTableList tests
Summary: Add tests for MemTableList

Test Plan: run test

Reviewers: yhchiang, kradhakrishnan, sdong, igor

Reviewed By: igor

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D36735
2015-04-09 18:01:11 -07:00