Summary:
Cleans up some of the dependencies on test code in the Makefile while building tools:
- Moves the test::RandomString, DBBaseTest::RandomString into Random
- Moves the test::RandomHumanReadableString into Random
- Moves the DestroyDir method into file_utils
- Moves the SetupSyncPointsToMockDirectIO into sync_point.
- Moves the FaultInjection Env and FS classes under env
These changes allow all of the tools to build without dependencies on test_util, thereby simplifying the build dependencies. By moving the FaultInjection code, the dependency in db_stress on different libraries for debug vs release was eliminated.
Tested both release and debug builds via Make and CMake for both static and shared libraries.
More work remains to clean up how the tools are built and remove some unnecessary dependencies. There is also more work that should be done to get the Makefile and CMake to align in their builds -- what is in the libraries and the sizes of the executables are different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7097
Reviewed By: riversand963
Differential Revision: D22463160
Pulled By: pdillinger
fbshipit-source-id: e19462b53324ab3f0b7c72459dbc73165cc382b2
Summary:
Delicious copy-pasta from https://github.com/facebook/rocksdb/issues/7039
Also fixing DestroyDir to allow files to go missing while it is operating. This seems to fix failures I got with test plan reproducer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7103
Test Plan:
make blackbox_crash_test_with_atomic_flush for a while with
checkpoint_one_in=100
Reviewed By: siying
Differential Revision: D22435315
Pulled By: pdillinger
fbshipit-source-id: 0ec0538402493887aeda43ecc03f32979cb84ced
Summary:
The ```for``` loop in ```VerifyChecksumInBlocks``` only checks ```index_iter->Valid()``` which could be ```false``` either due to reaching the end of the index or, in case of partitioned index, it could be due to a checksum mismatch error when reading a 2nd level index block. Instead of throwing away the index iterator status, we need to return any errors back to the caller.
Tests:
Add a test in block_based_table_reader_test.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6909
Reviewed By: pdillinger
Differential Revision: D21833922
Pulled By: anand1976
fbshipit-source-id: bc778ebf1121dbbdd768689de5183f07a9f0beae
Summary:
Currently, `DeleteDir` only deletes the directory if there are no other directories under the target dir. This PR makes it delete directories recursively.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6934
Test Plan:
Added a new unit test in testutil_test.cc.
`make testutil_test`
Reviewed By: zhichao-cao
Differential Revision: D21884211
Pulled By: cheng-chang
fbshipit-source-id: 0b9a48a200f494ee007aef5d1763b4aa331f8b5a
Summary:
Release code now depends on gtest, indirectly through including "test_util/testharness.h". This creates multiple problems. One important reason is the definition of IGNORE_STATUS_IF_ERROR() in test_util/testharness.h. Move it to sync_point.h instead.
Note that utilities/cassandra/format.h still depends on "test_util/testharness.h". This will be resolved in a separate diff.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6907
Test Plan: Run all existing tests.
Reviewed By: ajkr
Differential Revision: D21829884
fbshipit-source-id: 9253c19ffde2936f3ae68998210f8e54f645a6e6
Summary:
Currently, in direct IO mode, `MultiGet` retrieves the data blocks one by one instead of in parallel, see `BlockBasedTable::RetrieveMultipleBlocks`.
Since direct IO is supported in `RandomAccessFileReader::MultiRead` in https://github.com/facebook/rocksdb/pull/6446, this PR applies `MultiRead` to `MultiGet` so that the data blocks can be retrieved in parallel.
Also, in direct IO mode and when data blocks are compressed and need to uncompressed, this PR only allocates one continuous aligned buffer to hold the data blocks, and then directly uncompress the blocks to insert into block cache, there is no longer intermediate copies to scratch buffers.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6815
Test Plan:
1. added a new unit test `BlockBasedTableReaderTest::MultiGet`.
2. existing unit tests and stress tests contain tests against `MultiGet` in direct IO mode.
Reviewed By: anand1976
Differential Revision: D21426347
Pulled By: cheng-chang
fbshipit-source-id: b8446ae0e74152444ef9111e97f8e402ac31b24f
Summary:
Tried making Status object enforce that it is checked in some way. In cases it is not checked, `PermitUncheckedError()` must be called explicitly.
Added a way to run tests (`ASSERT_STATUS_CHECKED=1 make -j48 check`) on a
whitelist. The effort appears significant to get each test to pass with
this assertion, so I only fixed up enough to get one test (`options_test`)
working and added it to the whitelist.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6798
Reviewed By: pdillinger
Differential Revision: D21377404
Pulled By: ajkr
fbshipit-source-id: 73236f9c8df38f01cf24ecac4a6d1661b72d077e
Summary:
Fix the following cases that can cause false alarms in db_stress when read fault injection is
enabled -
1. Turn off corruption/truncation when direct IO is enabled. Since the actual IO size is larger than block size due to alignment requirements, the corruption may not result in a detectable error.
2. Handle the case when the randomly generated string to overwrite the original block is identical to the original.
Tests:
Run db_stress w/ and wo/ direct IO and fault injection turned on
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6777
Reviewed By: zhichao-cao
Differential Revision: D21316734
Pulled By: anand1976
fbshipit-source-id: bf0e6468043063ca81ff877d4bf71d3f296c77aa
Summary:
In crash test, the db directory might be set to /dev/shm or /tmp, in certain environments such as internal testing infrastructure, neither of these directories support direct IO, so direct IO is never enabled in crash test.
This PR sets up SyncPoints in direct IO related code paths to disable O_DIRECT flag in calls to `open`, so the direct IO code paths will be executed, all direct IO related assertions will be checked, but no real direct IO request will be issued to the file system.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6727
Test Plan:
export CRASH_TEST_EXT_ARGS="--use_direct_reads=1 --mmap_read=0"
make -j24 crash_test
Reviewed By: zhichao-cao
Differential Revision: D21139250
Pulled By: cheng-chang
fbshipit-source-id: db9adfe78d91aa4759835b1af91c5db7b27b62ee
Summary:
In https://github.com/facebook/rocksdb/pull/6455, we modified the interface of `RandomAccessFileReader::Read` to be able to get rid of memcpy in direct IO mode.
This PR applies the new interface to `BlockFetcher` when reading blocks from SST files in direct IO mode.
Without this PR, in direct IO mode, when fetching and uncompressing compressed blocks, `BlockFetcher` will first copy the raw compressed block into `BlockFetcher::compressed_buf_` or `BlockFetcher::stack_buf_` inside `RandomAccessFileReader::Read` depending on the block size. then during uncompressing, it will copy the uncompressed block into `BlockFetcher::heap_buf_`.
In this PR, we get rid of the first memcpy and directly uncompress the block from `direct_io_buf_` to `heap_buf_`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6689
Test Plan: A new unit test `block_fetcher_test` is added.
Reviewed By: anand1976
Differential Revision: D21006729
Pulled By: cheng-chang
fbshipit-source-id: 2370b92c24075692423b81277415feb2aed5d980
Summary:
Based on https://github.com/facebook/rocksdb/issues/6648 (CLA Signed), but heavily modified / extended:
* Implicit capture of this via [=] deprecated in C++20, and [=,this] not standard before C++20 -> now using explicit capture lists
* Implicit copy operator deprecated in gcc 9 -> add explicit '= default' definition
* std::random_shuffle deprecated in C++17 and removed in C++20 -> migrated to a replacement in RocksDB random.h API
* Add the ability to build with different std version though -DCMAKE_CXX_STANDARD=11/14/17/20 on the cmake command line
* Minimal rebuild flag of MSVC is deprecated and is forbidden with /std:c++latest (C++20)
* Added MSVC 2019 C++11 & MSVC 2019 C++20 in AppVeyor
* Added GCC 9 C++11 & GCC9 C++20 in Travis
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6697
Test Plan: make check and CI
Reviewed By: cheng-chang
Differential Revision: D21020318
Pulled By: pdillinger
fbshipit-source-id: 12311be5dbd8675a0e2c817f7ec50fa11c18ab91
Summary:
IsDirectory() is a common API to check whether a path is a regular file or
directory.
POSIX: call stat() and use S_ISDIR(st_mode)
Windows: PathIsDirectoryA() and PathIsDirectoryW()
HDFS: FileSystem.IsDirectory()
Java: File.IsDirectory()
...
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6711
Test Plan: make check
Reviewed By: anand1976
Differential Revision: D21053520
Pulled By: riversand963
fbshipit-source-id: 680aadfd8ce982b63689190cf31b3145d5a89e27
Summary:
Add env_fault_injection argument to db_stress. When enabled,
FaultInjectionTestEnv will be used instead. Currently this
option does not support running with other env setting.
This will allow
us to later manually produce error when running db_crashtest.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6687
Test Plan:
make db_stress -j32
./db_stress --env_fault_injection
./db_stress --env_fault_injection --hdfs // expect error message
Reviewed By: ajkr
Differential Revision: D21014683
Pulled By: yhchiang
fbshipit-source-id: 0724aeac37efd57adb72a37defe6dbd3bfa8106a
Summary:
1. Fix a memory leak in FaultInjectionTestFS in the stack trace related
code
2. Check status of all MultiGet keys before deciding whether an error
was swallowed, instead of assuming an ok status for any key means an
undetected error
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6700
Test Plan: Run db_stress with asan and fault injection
Reviewed By: cheng-chang
Differential Revision: D21021498
Pulled By: anand1976
fbshipit-source-id: 489191efd1ab0fa834923a1e1d57253a7a315465
Summary:
The error message is causing problems in the crash tests due to the
error parsing logic in db_crashtest.py.
This is a follow up PR for https://github.com/facebook/rocksdb/pull/6694.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6696
Test Plan: make check
Reviewed By: zhichao-cao
Differential Revision: D21021875
Pulled By: cheng-chang
fbshipit-source-id: 11e3f536df16941a89949ebcd2147cd8dfa3fbe0
Summary:
The error message is causing problems in the crash tests due to the
error parsing logic in db_crashtest.py.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6694
Reviewed By: siying
Differential Revision: D20998531
Pulled By: anand1976
fbshipit-source-id: 89cb54a5f5bb664ae6d239c37559f10e14c5ea07
Summary:
This PR implements a fault injection mechanism for injecting errors in reads in db_stress. The FaultInjectionTestFS is used for this purpose. A thread local structure is used to track the errors, so that each db_stress thread can independently enable/disable error injection and verify observed errors against expected errors. This is initially enabled only for Get and MultiGet, but can be extended to iterator as well once its proven stable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6538
Test Plan:
crash_test
make check
Reviewed By: riversand963
Differential Revision: D20714347
Pulled By: anand1976
fbshipit-source-id: d7598321d4a2d72bda0ced57411a337a91d87dc7
Summary:
Towards making compaction logic compatible with user timestamp.
When computing boundaries and overlapping ranges for inputs of compaction, We need to compare SSTs by user key without timestamp.
Test plan (devserver):
```
make check
```
Several individual tests:
```
./version_set_test --gtest_filter=VersionStorageInfoTimestampTest.GetOverlappingInputs
./db_with_timestamp_compaction_test
./db_with_timestamp_basic_test
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6645
Reviewed By: ltamasi
Differential Revision: D20960012
Pulled By: riversand963
fbshipit-source-id: ad377fa9eb481bf7a8a3e1824aaade48cdc653a4
Summary:
The current Env/FileSystem API separation has a couple of issues -
1. It requires the user to specify 2 options - ```Options::env``` and ```Options::file_system``` - which means they have to make code changes to benefit from the new APIs. Furthermore, there is a risk of accessing the same APIs in two different ways, through Env in the old way and through FileSystem in the new way. The two may not always match, for example, if env is ```PosixEnv``` and FileSystem is a custom implementation. Any stray RocksDB calls to env will use the ```PosixEnv``` implementation rather than the file_system implementation.
2. There needs to be a simple way for the FileSystem developer to instantiate an Env for backward compatibility purposes.
This PR solves the above issues and simplifies the migration in the following ways -
1. Embed a shared_ptr to the ```FileSystem``` in the ```Env```, and remove ```Options::file_system``` as a configurable option. This way, no code changes will be required in application code to benefit from the new API. The default Env constructor uses a ```LegacyFileSystemWrapper``` as the embedded ```FileSystem```.
1a. - This also makes it more robust by ensuring that even if RocksDB
has some stray calls to Env APIs rather than FileSystem, they will go
through the same object and thus there is no risk of getting out of
sync.
2. Provide a ```NewCompositeEnv()``` API that can be used to construct a
PosixEnv with a custom FileSystem implementation. This eliminates an
indirection to call Env APIs, and relieves the FileSystem developer of
the burden of having to implement wrappers for the Env APIs.
3. Add a couple of missing FileSystem APIs - ```SanitizeEnvOptions()``` and
```NewLogger()```
Tests:
1. New unit tests
2. make check and make asan_check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6552
Reviewed By: riversand963
Differential Revision: D20592038
Pulled By: anand1976
fbshipit-source-id: c3801ad4153f96d21d5a3ae26c92ba454d1bf1f7
Summary:
In the current code base, we can use FaultInjectionTestEnv to simulate the env issue such as file write/read errors, which are used in most of the test. The PR https://github.com/facebook/rocksdb/issues/5761 introduce the File System as a new Env API. This PR implement the FaultInjectionTestFS, which can be used to simulate when File System has issues such as IO error. user can specify any IOStatus error as input, such that FS corresponding actions will return certain error to the caller.
A set of ErrorHandlerFSTests are introduced for testing
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6414
Test Plan: pass make asan_check, pass error_handler_fs_test.
Differential Revision: D20252421
Pulled By: zhichao-cao
fbshipit-source-id: e922038f8ce7e6d1da329fd0bba7283c4b779a21
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
The DecreaseNumBgThreads test keeps failing on Windows in AppVeyor.
It fails because it depends on a timed wait for the tasks to be dequeued from the threadpool's internal queue, but within the specified time, the task might have not been scheduled onto the newly created threads.
https://github.com/facebook/rocksdb/pull/6232 tries to fix this by waiting for longer time to let the threads scheduled.
This PR tries to fix this by replacing the timed wait with a synchronization on the task's internal conditional variable.
When the number of threads increases, instead of guessing the time needed for the task to be scheduled, it directly blocks on the conditional variable until the task starts running.
But when thread number is reduced, it still does a timed wait, but this does not lead to the flakiness now, will try to remove these timed waits in a future PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6393
Test Plan: Wait to see whether AppVeyor tests pass.
Differential Revision: D19890928
Pulled By: cheng-chang
fbshipit-source-id: 4e56e4addf625c98c0876e62d9d57a6f0a156f76
Summary:
Right, when reading from option files, no readahead is used and 8KB buffer is used. It might introduce high latency if the file system provide high latency and doesn't do readahead. Instead, introduce a readahead to the file. When calling inside DB, infer the value from options.log_readahead. Otherwise, a default 512KB readahead size is used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6372
Test Plan: Add --log_readahead_size in db_bench. Run it with several options and observe read size from option files using strace.
Differential Revision: D19727739
fbshipit-source-id: e6d8053b0a64259abc087f1f388b9cd66fa8a583
Summary:
When paranoid_checks is on, DBImpl::CheckConsistency() iterates over all sst files and calls Env::GetFileSize() for each of them. As far as I could understand, this is pretty arbitrary and doesn't affect correctness - if filesystem doesn't corrupt fsynced files, the file sizes will always match; if it does, it may as well corrupt contents as well as sizes, and rocksdb doesn't check contents on open.
If there are thousands of sst files, getting all their sizes takes a while. If, on top of that, Env is overridden to use some remote storage instead of local filesystem, it can be *really* slow and overload the remote storage service. This PR adds an option to not do GetFileSize(); instead it does GetChildren() for parent directory to check that all the expected sst files are at least present, but doesn't check their sizes.
We can't just disable paranoid_checks instead because paranoid_checks do a few other important things: make the DB read-only on write errors, print error messages on read errors, etc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6353
Test Plan: ran the added sanity check unit test. Will try it out in a LogDevice test cluster where the GetFileSize() calls are causing a lot of trouble.
Differential Revision: D19656425
Pulled By: al13n321
fbshipit-source-id: c2c421b367633033760d1f56747bad206d1fbf82
Summary:
unordered_write is incompatible with non-zero max_successive_merges. Although we check this at runtime, we currently don't prevent the user from setting this combination in options. This has led to stress tests to fail with this combination is tried in ::SetOptions.
The patch fixes that and also reverts the changes performed by https://github.com/facebook/rocksdb/pull/6254, in which max_successive_merges was mistakenly declared incompatible with unordered_write.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6284
Differential Revision: D19356115
Pulled By: maysamyabandeh
fbshipit-source-id: f06dadec777622bd75f267361c022735cf8cecb6
Summary:
allow_concurrent_memtable_write is incompatible with non-zero max_successive_merges. Although we check this at runtime, we currently don't prevent the user from setting this combination in options. This has led to stress tests to fail with this combination is tried in ::SetOptions. The patch fixes that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6254
Differential Revision: D19265819
Pulled By: maysamyabandeh
fbshipit-source-id: 47f2e2dc26fe0972c7152f4da15dadb9703f1179
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
Summary:
Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter.
Speed
The improved speed, at least on recent x86_64, comes from
* Using fastrange instead of modulo (%)
* Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row.
* Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc.
* Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes.
Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed):
$ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter
Build avg ns/key: 47.7135
Mixed inside/outside queries...
Single filter net ns/op: 26.2825
Random filter net ns/op: 150.459
Average FP rate %: 0.954651
$ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter
Build avg ns/key: 47.2245
Mixed inside/outside queries...
Single filter net ns/op: 63.2978
Random filter net ns/op: 188.038
Average FP rate %: 1.13823
Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected.
The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome.
Accuracy
The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices
within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments.
Accuracy data (generalizes, except old impl gets worse with millions of keys):
Memory bits per key: FP rate percent old impl -> FP rate percent new impl
6: 5.70953 -> 5.69888
8: 2.45766 -> 2.29709
10: 1.13977 -> 0.959254
12: 0.662498 -> 0.411593
16: 0.353023 -> 0.0873754
24: 0.261552 -> 0.0060971
50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP)
Fixes https://github.com/facebook/rocksdb/issues/5857
Fixes https://github.com/facebook/rocksdb/issues/4120
Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized.
Compatibility
Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007
Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version).
Differential Revision: D18294749
Pulled By: pdillinger
fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
Summary:
Further apply formatter to more recent commits.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5830
Test Plan: Run all existing tests.
Differential Revision: D17488031
fbshipit-source-id: 137458fd94d56dd271b8b40c522b03036943a2ab
Summary:
file_reader_writer.h and .cc contain several files and helper function, and it's hard to navigate. Separate it to multiple files and put them under file/
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5803
Test Plan: Build whole project using make and cmake.
Differential Revision: D17374550
fbshipit-source-id: 10efca907721e7a78ed25bbf74dc5410dea05987
Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022
Differential Revision: D14394062
Pulled By: miasantreble
fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
Summary:
Added support for sequential read-ahead file that can prefetch the read data and later serve it from internal cache buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5580
Differential Revision: D16287082
Pulled By: elipoz
fbshipit-source-id: a3e7ad9643d377d39352ff63058ce050ec31dcf3
Summary:
Current PosixLogger performs IO operations using posix calls. Thus the
current implementation will not work for non-posix env. Created a new
logger class EnvLogger that uses env specific WritableFileWriter for IO operations.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5491
Test Plan: make check
Differential Revision: D15909002
Pulled By: ggaurav28
fbshipit-source-id: 13a8105176e8e42db0c59798d48cb6a0dbccc965
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
Summary:
It it not safe to assume application had sync the SST file before ingest it into DB. Also the directory to put the ingested file needs to be fsync, otherwise the file can be lost. For integrity of RocksDB we need to sync the ingested file and directory before apply the change to manifest.
Also syncing after writing global sequence when write_global_seqno=true was removed in https://github.com/facebook/rocksdb/issues/4172. Adding it back.
Fixes https://github.com/facebook/rocksdb/issues/5287.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5435
Test Plan:
Test ingest file with ldb command and observe fsync/fdatasync in strace output. Tried both move_files=true and move_files=false.
https://gist.github.com/yiwu-arbug/650a4023f57979056d83485fa863bef9
More test suggestions are welcome.
Differential Revision: D15941675
Pulled By: riversand963
fbshipit-source-id: 389533f3923065a96df2cdde23ff4724a1810d78
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
Currently we validate options in DB::Open. However the validation step is missing when options are dynamically updated in ::SetOptions. The patch fixes that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5368
Differential Revision: D15540101
Pulled By: maysamyabandeh
fbshipit-source-id: d27bbffd8f0252d1b50bcf59e0a70a278ed937f4
Summary:
Many logging related source files are under util/. It will be more structured if they are together.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5387
Differential Revision: D15579036
Pulled By: siying
fbshipit-source-id: 3850134ed50b8c0bb40a0c8ae1f184fa4081303f
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
