Summary:
Covering periodic compaction and compaction TTL can help us expose potential issues. Add it there.
Randomly select value for these two options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5741
Test Plan: Run crash_test and see the perameters generated.
Differential Revision: D17059515
fbshipit-source-id: 8213974846a0b6a22fc13be705825c9054d1d097
Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022
Differential Revision: D14394062
Pulled By: miasantreble
fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
Summary:
AtomicFlushStressTest is a powerful test, but right now we only run it for atomic_flush=true + disable_wal=true. We further extend it to the case where atomic_flush=false + disable_wal = false. All the workload generation and validation can stay the same.
Atomic flush crash test is also changed to switch between the two test scenarios. It makes the name "atomic flush crash test" out of sync from what it really does. We leave it as it is to avoid troubles with continous test set-up.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5729
Test Plan: Run "CRASH_TEST_KILL_ODD=188 TEST_TMPDIR=/dev/shm/ USE_CLANG=1 make whitebox_crash_test_with_atomic_flush", observe the settings used and see it passed.
Differential Revision: D16969791
fbshipit-source-id: 56e37487000ae631e31b0100acd7bdc441c04163
Summary:
Atomic flush test started to fail after https://github.com/facebook/rocksdb/issues/5099. Then https://github.com/facebook/rocksdb/issues/5278 provided a fix after
which the same error occurred much less frequently. However it still occur
occasionally. Not sure what the root cause is. This PR disables the feature of
snapshot list refresh, and we should keep an eye on the failure in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5581
Differential Revision: D16295985
Pulled By: riversand963
fbshipit-source-id: c9e62e65133c52c21b07097de359632ca62571e4
Summary:
When atomic flush stress test fails, we print internal keys within the range with mismatched key/values for all column families.
Test plan (on devserver)
Manually hack the code to randomly insert wrong data. Run the test.
```
$make clean && COMPILE_WITH_TSAN=1 make -j32 db_stress
$./db_stress -test_atomic_flush=true -ops_per_thread=10000
```
Check that proper error messages are printed, as follows:
```
2019/07/08-17:40:14 Starting verification
Verification failed
Latest Sequence Number: 190903
[default] 000000000000050B => 56290000525350515E5F5C5D5A5B5859
[3] 0000000000000533 => EE100000EAEBE8E9E6E7E4E5E2E3E0E1FEFFFCFDFAFBF8F9
Internal keys in CF 'default', [000000000000050B, 0000000000000533] (max 8)
key 000000000000050B seq 139920 type 1
key 0000000000000533 seq 0 type 1
Internal keys in CF '3', [000000000000050B, 0000000000000533] (max 8)
key 0000000000000533 seq 0 type 1
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5549
Differential Revision: D16158709
Pulled By: riversand963
fbshipit-source-id: f07fa87763f87b3bd908da03c956709c6456bcab
Summary:
Print out some more information when db_tress fails with verification failures to help debugging problems.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5543
Test Plan:
Manually ingest some failures and observe the outputs are like this:
Verification failed
[default] 0000000000199A5A => 7C3D000078797A7B74757677707172736C6D6E6F68696A6B
[6] 000000000019C8BD => 65380000616063626D6C6F6E69686B6A
internal keys in default CF [0000000000199A5A, 000000000019C8BD] (max 8)
key 0000000000199A5A seq 179246 type 1
key 000000000019C8BD seq 163970 type 1
Lastest Sequence Number: 292234
Differential Revision: D16153717
fbshipit-source-id: b33fa50a828c190cbf8249a37955432044f92daf
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
Many logging related source files are under util/. It will be more structured if they are together.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5387
Differential Revision: D15579036
Pulled By: siying
fbshipit-source-id: 3850134ed50b8c0bb40a0c8ae1f184fa4081303f
Summary:
When the --reopen option is non-zero, the DB is reopened after every ops_per_thread/(reopen+1) ops, with the check being done after every op. With MultiGet, we might do multiple ops in one iteration, which broke the logic that checked when to synchronize among the threads and reopen the DB. This PR fixes that logic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5374
Differential Revision: D15559780
Pulled By: anand1976
fbshipit-source-id: ee6563a68045df7f367eca3cbc2500d3e26359ef
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
This PR has two fixes for crash test failures -
1. Fix a bug in TestMultiGet() in db_stress that was passing list of key to MultiGet() in the wrong order, thus ensuring that actual values don't match expected values
2. Remove an incorrect assertion in FilePickerMultiGet::GetNextFileInLevelWithKeys() that checks that files in a level are in sorted order. This is not true with MultiGet(), especially if there are duplicate keys and we may have to go back one file for the next key. Furthermore, this assertion makes more sense when a new version is created, rather than at lookup time
Test -
asan_crash and ubsan_crash tests
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5301
Differential Revision: D15337383
Pulled By: anand1976
fbshipit-source-id: 35092cb15bbc1700e5e823cbe07bfa62f1e9e6c6
Summary:
This PR fixes three memory issues found by ASAN
* in db_stress, the key vector for MultiGet is created using `emplace_back` which could potentially invalidates references to the underlying storage (vector<string>) due to auto resizing. Fix by calling reserve in advance.
* Similar issue in construction of GetContext autovector in version_set.cc
* In multiget_context.h use T[] specialization for unique_ptr that holds a char array
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5279
Differential Revision: D15202893
Pulled By: miasantreble
fbshipit-source-id: 14cc2cda0ed64d29f2a1e264a6bfdaa4294ee75d
Summary:
The new option will pick a batch size randomly in the range 1-64. It will then space the keys in the batch by random intervals.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5264
Differential Revision: D15175522
Pulled By: anand1976
fbshipit-source-id: c16baa69d0f1ff4cf53c55c813ddd82c8aeb58fc
Summary:
At least one of the meta-block loading functions (`ReadRangeDelBlock`)
uses the same block reading function (`NewDataBlockIterator`) as data
block reads, which means it uses the dictionary handle. However, the
dictionary handle was uninitialized while reading meta-blocks, causing
readers to receive an error. This situation was only noticed when
`cache_index_and_filter_blocks=true`.
This PR initializes the handle to null while reading meta-blocks to
prevent the error. It also adds support to `db_stress` /
`db_crashtest.py` for `cache_index_and_filter_blocks`.
Fixes#5263.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5267
Differential Revision: D15149264
Pulled By: maysamyabandeh
fbshipit-source-id: 991d38a306c62db5976778bfb050fa3cd4a0671b
Summary:
Fix some hdfs-related code so that it can compile and run 'db_stress'
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5122
Differential Revision: D14675495
Pulled By: riversand963
fbshipit-source-id: cac280479efcf5451982558947eac1732e8bc45a
Summary:
Since this feature affects the WAL behavior, it seems important our crash-recovery tests cover it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5070
Differential Revision: D14470085
Pulled By: miasantreble
fbshipit-source-id: 9b9682a718a926d57d055e0a5ec867efbd2eb9c1
Summary:
MyRocks calls `GetForUpdate` on `INSERT`, for unique key check, and in almost all cases GetForUpdate returns empty result. For such cases, whole key bloom filter is helpful.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4985
Differential Revision: D14118257
Pulled By: miasantreble
fbshipit-source-id: d35cb7109c62fd5ad541a26968e3a3e16d3e85ea
Summary:
as titled.
We can remove the assersion because we do not perform verification in
AtomicFlushStressTest::TestCheckpoint for similar reasons to TestGet, TestPut,
etc.
Therefore, we override TestCheckpoint in AtomicFlushStressTest so that the
assertion `rand_column_families.size() == rand_keys.size()' is removed, and we
do not verify the DB in this function.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4846
Differential Revision: D13583377
Pulled By: riversand963
fbshipit-source-id: 03647f3da67e27a397413fd666e3bb43003bf596
Summary:
Updated stress test will support testing of db in read-only mode.
The user has to make sure that only read/scan operations are enabled.
This PR relies on #4681.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4690
Differential Revision: D13102741
Pulled By: riversand963
fbshipit-source-id: f5a36b34db187fe12dd355f7eda161f99d6c75e4
Summary:
- To be consistent with the accounting of other optypes in `TableProperties`, we should count range tombstones in `TableProperties::num_entries` and `TableProperties::num_deletions`.
- Updated assertions in stress test's `OnTableFileCreated` handler to accept files with range tombstones only.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4841
Differential Revision: D13568424
Pulled By: ajkr
fbshipit-source-id: 0139d7806494eda20ece67ec460d2458dbbf6026
Summary:
Separate flag for enabling option from flag for enabling dedicated atomic stress test. I have found setting the former without setting the latter can detect different problems.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4781
Differential Revision: D13463211
Pulled By: ajkr
fbshipit-source-id: 054f777885b2dc7d5ea99faafa21d6537eee45fd
Summary:
When iterator becomes invalid, there are two possibilities.
First, all data in the column family have been scanned and there is nothing
more to scan.
Second, an underlying error has occurred, causing `status()` to be !ok.
Therefore, we need to check for both cases when `!iter->Valid()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4648
Differential Revision: D12959601
Pulled By: riversand963
fbshipit-source-id: 49c9382c9ea9e78f2e2b6f3708f0670b822ca8dd
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
We already exercised backup functionality in `db_stress` according to the `-backup_one_in` flag. This PR verifies the backup can be restored/opened and sanity checks a few keys. Changes in this PR:
- Extracted existing backup-related logic to a helper function, `TestBackupRestore`
- Added restore logic, which targets a hidden directory named "./.restore\<thread number\>", similar to how backups target hidden directories named "./.backup\<thread number\>".
- After restore, check the existence/non-existence of a few keys.
- With this PR, backup is no longer compatible with clearing column families.
- Also included unrelated fixes to set `ReadOptions::total_order_seek=true` when using `-compare_full_db_state_snapshot`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4655
Differential Revision: D12972496
Pulled By: ajkr
fbshipit-source-id: 481a40052d9a38d1bd5c5159aa4d7c5a4b546b80
Summary:
Originally, the manual flush calls in db_stress flushes only a single column
family, which is not sufficient when atomic flush is enabled.
With atomic flush, we should call `Flush(flush_opts, cfhs)` to better test this
new feature. Specifically, we manuall flush all column families so that
database verification is easier.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4608
Differential Revision: D12849160
Pulled By: riversand963
fbshipit-source-id: ae1f0dd825247b42c0aba520a5c967335102c876
Summary:
The default for index_block_restart_interval is 1 but some use 16 in production. The patch extends crash test to test both values.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4383
Differential Revision: D9887304
Pulled By: maysamyabandeh
fbshipit-source-id: a8d00fea974a79ad563f9f4d9d7b069e9f746a8f
Summary:
TransactionOptions::skip_concurrency_control allows pessimistic transactions to skip the overhead of concurrency control. This could be as an optimization if the application knows that the transaction would not have any conflict with concurrent transactions. It is currently used during recovery assuming (i) application guarantees no conflict between prepared transactions in the WAL (ii) application guarantees that recovered transactions will be rolled back/commit before new transactions start.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4346
Differential Revision: D9759149
Pulled By: maysamyabandeh
fbshipit-source-id: f896e84fa58b0b584be904c7fd3883a41ea3215b
Summary:
This is a followup to #4311. Checking `!RangeDelAggregator::IsEmpty()` before opening a dedicated range tombstone SST did not properly prevent empty SSTs from being generated. That's because it relies on `CollapsedRangeDelMap::Size`, which had an underflow bug when the map was empty. This PR fixes that underflow bug.
Also fixed an uninitialized variable in db_stress.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4336
Differential Revision: D9600080
Pulled By: ajkr
fbshipit-source-id: bc6980ca79d2cd01b825ebc9dbccd51c1a70cfc7
Summary:
This PR fixes issue 3842. We drop deletion markers iff
1. We are the bottom most level AND
2. All other occurrences of the key are in the same snapshot range as the delete
I've also enhanced db_stress_test to add an option that does a full compare of the keys. This is done by a single thread (thread # 0). For tests I've run (so far)
make check -j64
db_stress
db_stress --acquire_snapshot_one_in=1000 --ops_per_thread=100000 /* to verify that new code doesnt break existing tests */
./db_stress --compare_full_db_state_snapshot=true --acquire_snapshot_one_in=1000 --ops_per_thread=100000 /* to verify new test code */
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4289
Differential Revision: D9491165
Pulled By: shrikanthshankar
fbshipit-source-id: ce144834f31736c189aaca81bed356ba990331e2
Summary:
The API comment on `OnTableFileCreationStarted` (b6280d01f9/include/rocksdb/listener.h (L331-L333)) led users to believe a call to `OnTableFileCreationStarted` will always be matched with a call to `OnTableFileCreated`. However, we were skipping the `OnTableFileCreated` call in one case: no error happens but also no file is generated since there's no data.
This PR adds the call to `OnTableFileCreated` for that case. The filename will be "(nil)" and the size will be zero.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4307
Differential Revision: D9485201
Pulled By: ajkr
fbshipit-source-id: 2f077ec7913f128487aae2624c69a50762394df6
Summary:
We want to sample the file I/O issued by RocksDB and report the function calls. This requires us to include the file paths otherwise it's hard to tell what has been going on.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4039
Differential Revision: D8670178
Pulled By: riversand963
fbshipit-source-id: 97ee806d1c583a2983e28e213ee764dc6ac28f7a
Summary:
In the OnTableFileCreation() listener, assert on various TableProperties
only when file size > 0 bytes. The listener can get called even for 0
byte SSTs which have been deleted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4273
Differential Revision: D9322738
Pulled By: anand1976
fbshipit-source-id: 17cdfb3d0da946b9a158d7328e5db1c87973956b
Summary:
Due to 4ea56b1bd0, we should also remove the
assersion in stress test. This removal can be temporary, and we can add it back
once we figure out the reason for the 0-byte SSTs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4268
Differential Revision: D9297186
Pulled By: riversand963
fbshipit-source-id: cebba9a68f42e815f8cf24471176d2cfdf962f63
Summary:
Although delete scheduler implementation allows for the interface not to be supported, the delete_scheduler_test does not allow for that.
Address compiler warnings
Make sst_dump_test use test directory structure as the current execution directory may not be writiable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4221
Differential Revision: D9210152
Pulled By: siying
fbshipit-source-id: 381a74511e969ecb8089d5c4b4df87dc30c8df63
Summary:
- Add `--compression_max_dict_bytes` and `--compression_zstd_max_train_bytes` flags to stress test
- Randomly enable/disable the above flags in crash test
- Set `--compression_type=zstd` in FB-specific crash test runs
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4234
Differential Revision: D9187207
Pulled By: ajkr
fbshipit-source-id: 8d78cf8d8e1165f2cd1c32e069b73726b5bc1fd2
Summary:
Making generation of column families and keys virtual function so that
subclasses of StressTest can override them to provide custom parameter
generation for more flexibility. This will be useful for future tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4046
Differential Revision: D9073382
Pulled By: riversand963
fbshipit-source-id: 2754f0fdfa5c24d95c1f92d4944bc479552fb665
Summary:
RocksDB used to store global_seqno in external SST files written by
SstFileWriter. During file ingestion, RocksDB uses `pwrite` to update the
`global_seqno`. Since random write is not supported in some non-POSIX compliant
file systems, external SST file ingestion is not supported on these file
systems. To address this limitation, we no longer update `global_seqno` during
file ingestion. Later RocksDB uses the MANIFEST and other information in table
properties to deduce global seqno for externally-ingested SST files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4172
Differential Revision: D8961465
Pulled By: riversand963
fbshipit-source-id: 4382ec85270a96be5bc0cf33758ca2b167b05071
Summary:
If crash happen after a hard link established, Recover function may reuse the file number that has already assigned to the internal file, and this will overwrite the external file. To protect the external file, we have to make sure the file number will never being reused.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4099
Differential Revision: D9034092
Pulled By: riversand963
fbshipit-source-id: 3f1a737440b86aa2ef01673e5013aacbb7c33e28
Summary:
db_stress doesn't cover upper or lower bound in iterators. Try to cover it by randomly assigning a random one. Also in prefix scan tests, with 50% of the chance, set next prefix as the upper bound.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4162
Differential Revision: D8953507
Pulled By: siying
fbshipit-source-id: f0f04e9cb6c07cbebbb82b892ca23e0daeea708b
