Commit Graph

17 Commits

Author SHA1 Message Date
Yanqin Jin
7177dc46a1 Handle missing WAL in secondary mode (#5323)
Summary:
In secondary mode, it is possible that the secondary lists the primary's WAL
directory, finds a WAL and tries to open it. It is possible that the primary
deletes the WAL after secondary listing dir but before the secondary opening
it. Then the secondary will fail to open the WAL file with a PathNotFound
status. In this case, we can return OK without replaying WAL and optionally
replay more MANIFEST.

Test Plan (on my dev machine):
Without this PR, the following will fail several times out of 100 runs.
```
~/gtest-parallel/gtest-parallel -r 100 -w 16 ./db_secondary_test --gtest_filter=DBSecondaryTest.SwitchToNewManifestDuringOpen
```
With this PR, the above should always succeed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5323

Differential Revision: D15763878

Pulled By: riversand963

fbshipit-source-id: c7164fa7cb8d9001abc258b6a2dc93613e4f38ff
2019-06-11 13:08:28 -07:00
sdong
58c4aee42e TransactionUtil::CheckKey() to skip unnecessary history (#4941)
Summary:
If a memtable definitely covers a key, there isn't a need to check older memtables.
We can skip them by checking the earliest sequence number.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4941

Differential Revision: D13932666

fbshipit-source-id: b9d52f234b8ad9dd3bf6547645cd457175a3ca9b
2019-06-11 11:46:42 -07:00
Maysam Yabandeh
c8c1a549f0 Avoid deadlock between mutex_ and log_write_mutex_ (#5437)
Summary:
To avoid deadlock mutex_ should never be acquired before log_write_mutex_. The patch documents that and also fixes one case in ::FlushWAL that acquires mutex_ through ::WriteStatusCheck when it already holds lock on log_write_mutex_.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5437

Differential Revision: D15749722

Pulled By: maysamyabandeh

fbshipit-source-id: f57b69c44b4b80cc6d7ddf3d3fdf4a9eb5a5a45a
2019-06-10 17:06:50 -07:00
Yanqin Jin
641cc8d541 Use CreateLoggerFromOptions function (#5427)
Summary:
Use `CreateLoggerFromOptions` function to reduce code duplication.

Test plan (on my machine)
```
$make clean && make -j32 db_secondary_test
$KEEP_DB=1 ./db_secondary_test
```
Verify all info logs of the secondary instance are properly logged.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5427

Differential Revision: D15748922

Pulled By: riversand963

fbshipit-source-id: bad7261df1b8373efc504f141efc7871e375a311
2019-06-10 16:00:30 -07:00
haoyuhuang
5efa0d6b0d Create a BlockCacheLookupContext to enable fine-grained block cache tracing. (#5421)
Summary:
BlockCacheLookupContext only contains the caller for now.
We will trace block accesses at five places:
1. BlockBasedTable::GetFilter.
2. BlockBasedTable::GetUncompressedDict.
3. BlockBasedTable::MaybeReadAndLoadToCache. (To trace access on data, index, and range deletion block.)
4. BlockBasedTable::Get. (To trace the referenced key and whether the referenced key exists in a fetched data block.)
5. BlockBasedTable::MultiGet. (To trace the referenced key and whether the referenced key exists in a fetched data block.)

We create the context at:
1. BlockBasedTable::Get. (kUserGet)
2. BlockBasedTable::MultiGet. (kUserMGet)
3. BlockBasedTable::NewIterator. (either kUserIterator, kCompaction, or external SST ingestion calls this function.)
4. BlockBasedTable::Open. (kPrefetch)
5. Index/Filter::CacheDependencies. (kPrefetch)
6. BlockBasedTable::ApproximateOffsetOf. (kCompaction or kUserApproximateSize).

I loaded 1 million key-value pairs into the database and ran the readrandom benchmark with a single thread. I gave the block cache 10 GB to make sure all reads hit the block cache after warmup. The throughput is comparable.
Throughput of this PR: 231334 ops/s.
Throughput of the master branch: 238428 ops/s.

Experiment setup:
RocksDB:    version 6.2
Date:       Mon Jun 10 10:42:51 2019
CPU:        24 * Intel Core Processor (Skylake)
CPUCache:   16384 KB
Keys:       20 bytes each
Values:     100 bytes each (100 bytes after compression)
Entries:    1000000
Prefix:    20 bytes
Keys per prefix:    0
RawSize:    114.4 MB (estimated)
FileSize:   114.4 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: NoCompression
Compression sampling rate: 0
Memtablerep: skip_list
Perf Level: 1

Load command: ./db_bench --benchmarks="fillseq" --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --statistics --cache_index_and_filter_blocks --cache_size=10737418240 --disable_auto_compactions=1 --disable_wal=1 --compression_type=none --min_level_to_compress=-1 --compression_ratio=1 --num=1000000

Run command: ./db_bench --benchmarks="readrandom,stats" --use_existing_db --threads=1 --duration=120 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --statistics --cache_index_and_filter_blocks --cache_size=10737418240 --disable_auto_compactions=1 --disable_wal=1 --compression_type=none --min_level_to_compress=-1 --compression_ratio=1 --num=1000000 --duration=120

TODOs:
1. Create a caller for external SST file ingestion and differentiate the callers for iterator.
2. Integrate tracer to trace block cache accesses.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5421

Differential Revision: D15704258

Pulled By: HaoyuHuang

fbshipit-source-id: 4aa8a55f8cb1576ffb367bfa3186a91d8f06d93a
2019-06-10 15:33:27 -07:00
Yanqin Jin
6ce5580882 Improve memtable earliest seqno assignment for secondary instance (#5413)
Summary:
In regular RocksDB instance, `MemTable::earliest_seqno_` is "db sequence number at the time of creation". However, we cannot use the db sequence number to set the value of `MemTable::earliest_seqno_` for secondary instance, i.e. `DBImplSecondary` due to the logic of MANIFEST and WAL replay.
When replaying the log files of the primary, the secondary instance first replays MANIFEST and updates the db sequence number if necessary. Next, the secondary replays WAL files, creates new memtables if necessary and inserts key-value pairs into memtables. The following can occur when the db has two or more column families.
Assume the db has column family "default" and "cf1". At a certain in time, both "default" and "cf1" have data in memtables.
1. Primary triggers a flush and flushes "cf1". "default" is **not** flushed.
2. Secondary replays the MANIFEST updates its db sequence number to the latest value learned from the MANIFEST.
3. Secondary starts to replay WAL that contains the writes to "default". It is possible that the write batches' sequence numbers are smaller than the db sequence number. In this case, these write batches will be skipped, and these updates will not be visible to reader until "default" is later flushed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5413

Differential Revision: D15637407

Pulled By: riversand963

fbshipit-source-id: 3de3fe35cfc6f1b9f844f3f926f0df29717b6580
2019-06-10 12:58:14 -07:00
Maysam Yabandeh
c292dc8540 WritePrepared: reduce prepared_mutex_ overhead (#5420)
Summary:
The patch reduces the contention over prepared_mutex_ using these techniques:
1) Move ::RemovePrepared() to be called from the commit callback when we have two write queues.
2) Use two separate mutex for PreparedHeap, one prepared_mutex_ needed for ::RemovePrepared, and one ::push_pop_mutex() needed for ::AddPrepared(). Given that we call ::AddPrepared only from the first write queue and ::RemovePrepared mostly from the 2nd, this will result into each the two write queues not competing with each other over a single mutex. ::RemovePrepared might occasionally need to acquire ::push_pop_mutex() if ::erase() ends up with calling ::pop()
3) Acquire ::push_pop_mutex() on the first callback of the write queue and release it on the last.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5420

Differential Revision: D15741985

Pulled By: maysamyabandeh

fbshipit-source-id: 84ce8016007e88bb6e10da5760ba1f0d26347735
2019-06-10 11:53:31 -07:00
anand76
b703a56e5c Potential fix for stress test failure due to "SST file ahead of WAL" error (#5412)
Summary:
I'm not able to prove it, but the stress test failure may be caused by the following sequence of events -

1. Crash db_stress while writing the log file. This should result in a corrupted WAL.
2. Run db_stress with recycle_log_file_num=1. Crash during recovery immediately after writing manifest and updating the current file. The old log from the previous run is left behind, but the memtable would have been flushed during recovery and the CF log number will point to the newer log
3. Run db_stress with recycle_log_file_num=0. During recovery, the old log file will be processed and the corruption will be detected. Since the CF has moved ahead, we get the "SST file is ahead of WAL" error

Test -
1. stress_crash
2. make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5412

Differential Revision: D15699120

Pulled By: anand1976

fbshipit-source-id: 9092ce81e7c4a0b4b4e66560c23ea4812a4d9cbe
2019-06-07 15:35:47 -07:00
Zhongyi Xie
d68f9f4580 simplify include directive involving inttypes (#5402)
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402

Differential Revision: D15701195

Pulled By: miasantreble

fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
2019-06-06 13:56:07 -07:00
Yanqin Jin
340ed4fac7 Add support for timestamp in Get/Put (#5079)
Summary:
It's useful to be able to (optionally) associate key-value pairs with user-provided timestamps. This PR is an early effort towards this goal and continues the work of facebook#4942. A suite of new unit tests exist in DBBasicTestWithTimestampWithParam. Support for timestamp requires the user to provide timestamp as a slice in `ReadOptions` and `WriteOptions`. All timestamps of the same database must share the same length, format, etc. The format of the timestamp is the same throughout the same database, and the user is responsible for providing a comparator function (Comparator) to order the <key, timestamp> tuples. Once created, the format and length of the timestamp cannot change (at least for now).

Test plan (on devserver):
```
$COMPILE_WITH_ASAN=1 make -j32 all
$./db_basic_test --gtest_filter=Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/*
$make check
```
All tests must pass.

We also run the following db_bench tests to verify whether there is regression on Get/Put while timestamp is not enabled.
```
$TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillseq,readrandom -num=1000000
$TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=1000000
```
Repeat for 6 times for both versions.

Results are as follows:
```
|        | readrandom | fillrandom |
| master | 16.77 MB/s | 47.05 MB/s |
| PR5079 | 16.44 MB/s | 47.03 MB/s |
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5079

Differential Revision: D15132946

Pulled By: riversand963

fbshipit-source-id: 833a0d657eac21182f0f206c910a6438154c742c
2019-06-05 23:10:47 -07:00
haoyuhuang
227b5d52df Make RocksDB secondary instance respect atomic groups in version edits. (#5411)
Summary:
With this commit, RocksDB secondary instance respects atomic groups in version edits.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5411

Differential Revision: D15617512

Pulled By: HaoyuHuang

fbshipit-source-id: 913f4ede391d772dcaf5649e3cd2099fa292d120
2019-06-04 10:56:19 -07:00
anand76
5d6e8df1cf Ignore shutdown error during compaction (#5400)
Summary:
The PR #5275 separated the column dropped and shutdown status codes. However, there were a couple of places in compaction where this change ended up treating a ShutdownInProgress() error as a real error and set bg_error. This caused MyRocks unit test to fail due to WAL writes during shutdown returning this error. Fix it by ignoring the shutdown status during compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5400

Differential Revision: D15611680

Pulled By: anand1976

fbshipit-source-id: c602e97840e3ae24eb420d61e0ce95d3e6258632
2019-06-03 22:40:43 -07:00
Maysam Yabandeh
ae05a83e19 Call ValidateOptions from SetOptions (#5368)
Summary:
Currently we validate options in DB::Open. However the validation step is missing when options are dynamically updated in ::SetOptions. The patch fixes that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5368

Differential Revision: D15540101

Pulled By: maysamyabandeh

fbshipit-source-id: d27bbffd8f0252d1b50bcf59e0a70a278ed937f4
2019-06-03 19:49:57 -07:00
Siying Dong
5851cb7fdb Move util/trace_replay.* to trace_replay/ (#5376)
Summary:
util/ means for lower level libraries. trace_replay is highly integrated to DB and sometimes call DB. Move it out to a separate directory.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5376

Differential Revision: D15550938

Pulled By: siying

fbshipit-source-id: f46dce5ceffdc05a73f26379c7bb1b79ebe6c207
2019-06-03 13:25:26 -07:00
Siying Dong
000b9ec217 Move some logging related files to logging/ (#5387)
Summary:
Many logging related source files are under util/. It will be more structured if they are together.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5387

Differential Revision: D15579036

Pulled By: siying

fbshipit-source-id: 3850134ed50b8c0bb40a0c8ae1f184fa4081303f
2019-05-31 17:23:59 -07:00
Vijay Nadimpalli
cae22c53fb Make format
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/5395

Differential Revision: D15581698

Pulled By: vjnadimpalli

fbshipit-source-id: f415972f16e784b1361714c202b97defcab46767
2019-05-31 15:24:43 -07:00
Vijay Nadimpalli
49c5a12dbe Organizing rocksdb/db directory
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/5390

Differential Revision: D15579388

Pulled By: vjnadimpalli

fbshipit-source-id: 5bfc95e31554b8ff05b97b76d6534113f527f366
2019-05-31 11:57:01 -07:00