Summary:
When table file checksums are enabled and stored in the DB manifest by using the RocksDB default crc32c checksum function, BackupEngine will calculate the crc32c checksum of the file to be copied and compare the calculated result with the one stored in the DB manifest before copying the file to the backup directory.
After copying to the backup directory, BackupEngine will verify the checksum of the copied file with the one calculated before copying. This helps detect some rare corruption events such as bit-flips during the copying process.
No verification with checksums in DB manifest will be performed if the table file checksum function is not the RocksDB default crc32c checksum function.
In addition, If `share_table_files` and `share_files_with_checksum` are true, BackupEngine will compare the checksums computed before and after copying of the table files.
Corresponding tests are added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7015
Test Plan: Passed make check
Reviewed By: pdillinger
Differential Revision: D22165732
Pulled By: gg814
fbshipit-source-id: ee0e8cc397c455eba64545c29380b9d9853588ec
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7049
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D22301700
fbshipit-source-id: f9a9e3b3b26ce640665a47cb8bff33ba0c89b565
Summary:
When format_version is high enough to support user-key and there are index entries for same user key that spans multiple data blocks then it changes from user-key mode to internal-key mode. But the flush policy is not reset to point to Block Builder of internal-keys. After this switch, no entries are added to user key index partition result, thus it never triggers flushing the block.
Fix: After adding the entry in sub_builder_index_, if there is a switch from user-key to internal-key, then flush policy is updated to point to Block Builder of internal-keys index partition.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7022
Test Plan:
1. make check -j64
2. Added one unit test case
Reviewed By: ajkr
Differential Revision: D22197734
Pulled By: akankshamahajan15
fbshipit-source-id: d87e9e46bccab8e896ee6979d6b79c51f73d479e
Summary:
This check is flaky because compaction could run between the `Flush()` and the `TestGetTickerCount()`, which would increase the `BLOCK_CACHE_INDEX_MISS` count beyond what the test expects. Verified by adding a `sleep(1)` between those two lines and observing the counter is too high every time. The solution is just to remove this check as it doesn't have any use anyways. The latter check of index miss is sufficient to conclude the newest L0 file (i.e., the one generated by intra-L0) does not have its index block pinned in cache. It'd be nice to simultaneously check the L0 files generated by flush do have their index blocks pinned in cache, but that's not what the line deleted in this PR was checking..
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7065
Reviewed By: pdillinger
Differential Revision: D22340327
Pulled By: ajkr
fbshipit-source-id: e076b2c7228b7fa763dd0c0cb13828e176c1abee
Summary:
Random memtable layouts could cause random failure,
reproducible with command below running for a while. Test now using
deterministic behavior.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7064
Test Plan: while ./db_test --gtest_filter=*SizesMemTable*; do true; done
Reviewed By: siying
Differential Revision: D22339442
Pulled By: pdillinger
fbshipit-source-id: 8e74e5a9b5e88f7030854045a22c12cf561d5de6
Summary:
Change the linking of tests/tools to be against a library rather than a list of objects. This change substantially reduces the size of the objects produced.
peterd clean repo size: 264M
Before this change, with make all: 40G
After this change, with make all: 28G
With make LIB_MODE=shared all: 7.0G
The list of TESTS was changed from being hard-coded to generated from the test sources variable. Note that there are some test sources that are not built as tests (though the set of tests is identical to the previous version).
Added OBJ_DIR option to Makefile to allow objects to be placed in an alternative location. By default, OBJ_DIR is the same as before ("./").
This change is a precursor to being able to build/run the tests/tools linked against static libraries. Additionally, it should be possible to clean up and merge some of the rules for building tests and the like if so desired.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6660
Reviewed By: riversand963
Differential Revision: D22244463
Pulled By: pdillinger
fbshipit-source-id: db9c6341d81ed62c2270374f4ede02fb9604c754
Summary:
The earlier `VersionBuilder` code only cleaned up blob files that were
marked as entirely consisting of garbage using `VersionEdits` with
`BlobFileGarbage`. This covers the cases when table files go through
regular compaction, where we iterate through the KVs and thus have an
opportunity to calculate the amount of garbage (that is, most cases).
However, it does not help when table files are simply dropped (e.g. deletion
compactions or the `DeleteFile` API). To deal with such cases, the patch
adds logic that cleans up all blob files at the head of the list until the first
one with linked SSTs is found. (As an example, let's assume we have blob files
with numbers 1..10, and the first one with any linked SSTs is number 8.
This means that SSTs in the `Version` only rely on blob files with numbers >= 8,
and thus 1..7 are no longer needed.)
The code change itself is pretty small; however, changing the logic like this
necessitated changes to some tests that have been added recently (namely
to the ones that use blob files in isolation, i.e. without any table files referring
to them). Some of these cases were fixed by bypassing `VersionBuilder` altogether
in order to keep the tests simple (which actually makes them more proper unit tests
as well), while the `VersionBuilder` unit tests were fixed by adding dummy table
files to the test cases as needed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7001
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D22119474
Pulled By: ltamasi
fbshipit-source-id: c6547141355667d4291d9661d6518eb741e7b54a
Summary:
WriteCallbackTest.WriteWithCallbackTest has a deep for-loop and in some cases runs very long. Parameterimized it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7037
Test Plan: Run the test and see it passes.
Reviewed By: ltamasi
Differential Revision: D22269259
fbshipit-source-id: a1b6687b5bf4609754833d14cf383d68bc7ab27a
Summary:
Added compaction filter support for BlobDB non-TTL values. Same as vanilla RocksDB, user compaction filter applies to all k/v pairs of the compaction for non-TTL values. It honors `min_blob_size`, which potentially results value transitions between inlined data and stored-in-blob data when size of value is changed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6850
Reviewed By: siying
Differential Revision: D22263487
Pulled By: ltamasi
fbshipit-source-id: 8fc03f8cde2a5c831e63b436b3dbf1b7f90939e8
Summary:
Fsyncing files is not providing more test coverage in many tests. Provide an option in SpecialEnv to turn it off to speed it up and enable this option in some tests with relatively long run time.
Most of those tests can be divided as parameterized gtest too. This two speed up approaches are orthogonal and we can do both if needed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7036
Test Plan: Run all tests and make sure they pass.
Reviewed By: ltamasi
Differential Revision: D22268084
fbshipit-source-id: 6d4a838a1b7328c13931a2a5d93de57aa02afaab
Summary:
Current implementation of the ```read_options.deadline``` option only checks the deadline for random file reads during point lookups. This PR extends the checks to file opens, prefetches and preloads as part of table open.
The main changes are in the ```BlockBasedTable```, partitioned index and filter readers, and ```TableCache``` to take ReadOptions as an additional parameter. In ```BlockBasedTable::Open```, in order to retain existing behavior w.r.t checksum verification and block cache usage, we filter out most of the options in ```ReadOptions``` except ```deadline```. However, having the ```ReadOptions``` gives us more flexibility to honor other options like verify_checksums, fill_cache etc. in the future.
Additional changes in callsites due to function signature changes in ```NewTableReader()``` and ```FilePrefetchBuffer```.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6982
Test Plan: Add new unit tests in db_basic_test
Reviewed By: riversand963
Differential Revision: D22219515
Pulled By: anand1976
fbshipit-source-id: 8a3b92f4a889808013838603aa3ca35229cd501b
Summary:
After https://github.com/facebook/rocksdb/issues/6949 , VersionSet::io_status_ can be concurrently accessed by multiple
threads without lock, causing tsan test to fail. For example, a bg flush thread
resets io_status_ before calling LogAndApply(), while another thread already in
the process of LogAndApply() reads io_status_. This is a bug.
We do not have to reset io_status_ each time we call LogAndApply(). io_status_
is part of the state of VersionSet, and it indicates the outcome of preceding
MANIFEST/CURRENT files IO operations. Its value should be updated only when:
1. MANIFEST/CURRENT files IO fail for the first time.
2. MANIFEST/CURRENT files IO succeed as part of recovering from a prior
failure without process restart, e.g. calling Resume().
Test Plan (devserver):
COMPILE_WITH_TSAN=1 make check
COMPILE_WITH_TSAN=1 make db_test2
./db_test2 --gtest_filter=DBTest2.CompactionStall
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7034
Reviewed By: zhichao-cao
Differential Revision: D22247137
Pulled By: riversand963
fbshipit-source-id: 77b83e05390f3ee3cd2d96d3fdd6fe4f225e3216
Summary:
We are still keeping unity build working. So it's a good idea to add to a pre-commit CI.
A latest GCC docker image just to get a little bit more coverage. Fix three small issues to make it pass.
Also make unity_test to run db_basic_test rather than db_test to cut the test time. There is no point to run expensive tests here. It was set to run db_test before db_basic_test was separated out.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7026
Test Plan: watch tests to pass.
Reviewed By: zhichao-cao
Differential Revision: D22223197
fbshipit-source-id: baa3b6cbb623bf359829b63ce35715c75bcb0ed4
Summary:
Some tests directly uses TmpDir() as temporary directory without adding any randomize factor. This would cause failures when tests run in parallel. Fix it by moving some of them to test::PerThreadDBPath()
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7030
Test Plan: Watch existing tests pass
Reviewed By: zhichao-cao
Differential Revision: D22224710
fbshipit-source-id: 28c9932fede0a4a64670e5b5fdb08f4fb5dccdd0
Summary:
`BackupableDBOptions::new_naming_for_backup_files` is added. This option is false by default. When it is true, backup table filenames under directory shared_checksum are of the form `<file_number>_<crc32c>_<db_session_id>.sst`.
Note that when this option is true, it comes into effect only when both `share_files_with_checksum` and `share_table_files` are true.
Three new test cases are added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6997
Test Plan: Passed make check.
Reviewed By: ajkr
Differential Revision: D22098895
Pulled By: gg814
fbshipit-source-id: a1d9145e7fe562d71cde7ac995e17cb24fd42e76
Summary:
This PR provides preliminary support for handling IO error during MANIFEST write.
File write/sync is not guaranteed to be atomic. If we encounter an IOError while writing/syncing to the MANIFEST file, we cannot be sure about the state of the MANIFEST file. The version edits may or may not have reached the file. During cleanup, if we delete the newly-generated SST files referenced by the pending version edit(s), but the version edit(s) actually are persistent in the MANIFEST, then next recovery attempt will process the version edits(s) and then fail since the SST files have already been deleted.
One approach is to truncate the MANIFEST after write/sync error, so that it is safe to delete the SST files. However, file truncation may not be supported on certain file systems. Therefore, we take the following approach.
If an IOError is detected during MANIFEST write/sync, we disable file deletions for the faulty database. Depending on whether the IOError is retryable (set by underlying file system), either RocksDB or application can call `DB::Resume()`, or simply shutdown and restart. During `Resume()`, RocksDB will try to switch to a new MANIFEST and write all existing in-memory version storage in the new file. If this succeeds, then RocksDB may proceed. If all recovery is completed, then file deletions will be re-enabled.
Note that multiple threads can call `LogAndApply()` at the same time, though only one of them will be going through the process MANIFEST write, possibly batching the version edits of other threads. When the leading MANIFEST writer finishes, all of the MANIFEST writing threads in this batch will have the same IOError. They will all call `ErrorHandler::SetBGError()` in which file deletion will be disabled.
Possible future directions:
- Add an `ErrorContext` structure so that it is easier to pass more info to `ErrorHandler`. Currently, as in this example, a new `BackgroundErrorReason` has to be added.
Test plan (dev server):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6949
Reviewed By: anand1976
Differential Revision: D22026020
Pulled By: riversand963
fbshipit-source-id: f3c68a2ef45d9b505d0d625c7c5e0c88495b91c8
Summary:
It's useful to build RocksDB using a more recent clang version in CI. Add a CircleCI build and fix some issues with it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7025
Test Plan: See all tests pass.
Reviewed By: pdillinger
Differential Revision: D22215700
fbshipit-source-id: 914a729c2cd3f3ac4a627cc0ac58d4691dca2168
Summary:
The constant `kNoExpiration` is currently defined in an
internal/implementation header (`blob_log_format.h`); the patch moves it
to the public header `blob_db.h` so it is accessible to users.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7018
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D22191354
Pulled By: ltamasi
fbshipit-source-id: 98c8012a83b999a3f1a30e955ce6bb71ba29dc5c
Summary:
FlushAfterIntraL0CompactionCheckConsistencyFail is flakey. It sometimes fails with:
db/db_compaction_test.cc:5186: Failure
Expected equality of these values:
10
NumTableFilesAtLevel(0)
Which is: 3
I don't see a clear reason why the assertion would always be true. The necessarily of the assertion is not clear either. Remove it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7003
Test Plan: See the test still builds.
Reviewed By: riversand963
Differential Revision: D22129753
fbshipit-source-id: 42f0bb05e32b369e8d726bfd3e35c29cf52fe008
Summary:
Although RocksDB falls over in various other ways with KVs
around 4GB or more, this change fixes how XXH32 and XXH64 were being
called by the block checksum code to support >= 4GB in case that should
ever happen, or the code copied for other uses.
This change is not a schema compatibility issue because the checksum
verification code would checksum the first (block_size + 1) mod 2^32
bytes while the checksum construction code would checksum the first
block_size mod 2^32 plus the compression type byte, meaning the
XXH32/64 checksums for >=4GB block would not match about 255/256 times.
While touching this code, I refactored to consolidate redundant
implementations, improving diagnostics and performance tracking in some
cases. Also used less confusing language in those diagnostics.
Makes https://github.com/facebook/rocksdb/issues/6875 obsolete.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6978
Test Plan:
I was able to write a test for this using an SST file writer
and VerifyChecksum in a reader. The test fails before the fix, though
I'm leaving the test disabled because I don't think it's worth the
expense of running regularly.
Reviewed By: gg814
Differential Revision: D22143260
Pulled By: pdillinger
fbshipit-source-id: 982993d16134e8c50bea2269047f901c1783726e
Summary:
The bug fixed in https://github.com/facebook/rocksdb/pull/1816/ is now applicable to iterator too. This was not an issue but https://github.com/facebook/rocksdb/pull/2886 caused the regression. If a put and DB flush happens just between iterator to get latest sequence number and getting super version, empty result for the key or an older value can be returned, which is wrong.
Fix it in the same way as the fix in https://github.com/facebook/rocksdb/issues/1816, that is to get the sequence number after referencing the super version.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6973
Test Plan: Will run stress tests for a while to make sure there is no general regression.
Reviewed By: ajkr
Differential Revision: D22029348
fbshipit-source-id: 94390f93630906796d6e2fec321f44a920953fd1
Summary:
https://github.com/facebook/rocksdb/issues/5411 refactored `VersionSet::Recover` but introduced a bug, explained as follows.
Before, once a checksum mismatch happens, `reporter` will set `s` to be non-ok. Therefore, Recover will stop processing the MANIFEST any further.
```
// Correct
// Inside Recover
LogReporter reporter;
reporter.status = &s;
log::Reader reader(..., reporter);
while (reader.ReadRecord() && s.ok()) {
...
}
```
The bug is that, the local variable `s` in `ReadAndRecover` won't be updated by `reporter` while reading the MANIFEST. It is possible that the reader sees a checksum mismatch in a record, but `ReadRecord` retries internally read and finds the next valid record. The mismatched record will be ignored and no error is reported.
```
// Incorrect
// Inside Recover
LogReporter reporter;
reporter.status = &s;
log::Reader reader(..., reporter);
s = ReadAndRecover(reader, ...);
// Inside ReadAndRecover
Status s; // Shadows the s in Recover.
while (reader.ReadRecord() && s.ok()) {
...
}
```
`LogReporter` can use a separate `log_read_status` to track the errors while reading the MANIFEST. RocksDB can process more MANIFEST entries only if `log_read_status.ok()`.
Test plan (devserver):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6996
Reviewed By: ajkr
Differential Revision: D22105746
Pulled By: riversand963
fbshipit-source-id: b22f717a423457a41ca152a242abbb64cf91fc38
Summary:
Compressed block cache is disabled in https://github.com/facebook/rocksdb/pull/4650 for no good reason. Re-enable it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6990
Test Plan: Add a unit test to make sure a general function works with read-only DB + compressed block cache.
Reviewed By: ltamasi
Differential Revision: D22072755
fbshipit-source-id: 2a55df6363de23a78979cf6c747526359e5dc7a1
Summary:
`db_id` and `db_session_id` are now part of the table properties for all formats and stored in SST files. This adds about 99 bytes to each new SST file.
The `TablePropertiesNames` for these two identifiers are `rocksdb.creating.db.identity` and `rocksdb.creating.session.identity`.
In addition, SST files generated from SstFileWriter and Repairer have DB identity “SST Writer” and “DB Repairer”, respectively. Their DB session IDs are generated in the same way as `DB::GetDbSessionId`.
A table property test is added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6983
Test Plan: make check and some manual tests.
Reviewed By: zhichao-cao
Differential Revision: D22048826
Pulled By: gg814
fbshipit-source-id: afdf8c11424a6f509b5c0b06dafad584a80103c9
Summary:
In best-efforts recovery, an error that is not Corruption or IOError::kNotFound or IOError::kPathNotFound will be overwritten silently. Fix this by checking all non-ok cases and return early.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6989
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D22071418
Pulled By: riversand963
fbshipit-source-id: 5a4ea5dfb1a41f41c7a3fdaf62b163007b42f04b
Summary:
Best-efforts recovery does not check the content of CURRENT file to determine which MANIFEST to recover from. However, it still checks the presence of CURRENT file to determine whether to create a new DB during `open()`. Therefore, we can tweak the logic in `open()` a little bit so that best-efforts recovery does not rely on CURRENT file at all.
Test plan (dev server):
make check
./db_basic_test --gtest_filter=DBBasicTest.RecoverWithNoCurrentFile
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6970
Reviewed By: anand1976
Differential Revision: D22013990
Pulled By: riversand963
fbshipit-source-id: db552a1868c60ed70e1f7cd252a3a076eb8ea58f
Summary:
Added DB::GetDbSessionId by using the same format and machinery as DB::GetDbIdentity.
The DB Session ID is generated (and therefore, updated) each time a DB object is opened. It is written to the LOG file right after the line of “DB SUMMARY”.
A test for the uniqueness, for different openings and during the same opening, is also added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6959
Test Plan: Passed make check
Reviewed By: zhichao-cao
Differential Revision: D21951721
Pulled By: gg814
fbshipit-source-id: 958a48a612db49a39998ea703cded45987d3fa8b
Summary:
Persistent cache feature caused rocks db crash on windows. I posted a issue for it, https://github.com/facebook/rocksdb/issues/6919. I found this is because no "persistent_cache_key_prefix" is generated for persistent cache. Looking repo history, "GetUniqueIdFromFile" is not implemented on Windows. So my fix is adding "NewId()" function in "persistent_cache" and using it to generate prefix for persistent cache. In this PR, i also re-enable related test cases defined in "db_test2" and "persistent_cache_test" for windows.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6932
Test Plan:
1. run related test cases in "db_test2" and "persistent_cache_test" on windows and see it passed.
2. manually run db_bench.exe with "read_cache_path" and verified.
Reviewed By: riversand963
Differential Revision: D21911608
Pulled By: cheng-chang
fbshipit-source-id: cdfd938d54a385edbb2836b13aaa1d39b0a6f1c2
Summary:
The `FileMetaData` objects associated with table files already contain the
number of the oldest blob file referenced by the SST in question. This patch
adds the inverse mapping to `BlobFileMetaData`, namely the set of table file
numbers for which the oldest blob file link points to the given blob file (these
are referred to as *linked SSTs*). This mapping will be used by the GC logic.
Implementation-wise, the patch builds on the `BlobFileMetaDataDelta`
functionality introduced in https://github.com/facebook/rocksdb/pull/6835: newly linked/unlinked SSTs are
accumulated in `BlobFileMetaDataDelta`, and the changes to the linked SST set
are applied in one shot when the new `Version` is saved. The patch also reworks
the blob file related consistency checks in `VersionBuilder` so they validate the
consistency of the forward table file -> blob file links and the backward blob file ->
table file links for blob files that are part of the `Version`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6945
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D21912228
Pulled By: ltamasi
fbshipit-source-id: c5bc7acf6e729a8fccbb12672dd5cd00f6f000f8
Summary:
If `options.wal_recovery_mode == WALRecoveryMode::kPointInTimeRecovery`, RocksDB stops replaying WAL once hitting an error and discards the rest of the WAL. This can lead to data loss if the error occurs at an offset smaller than the last sync'ed offset.
Ideally, RocksDB point-in-time recovery should permit recovery if the error occurs after last synced offset while fail recovery if error occurs before the last synced offset. However, RocksDB does not track the synced offset of WALs. Consequently, RocksDB does not know whether an error occurs before or after the last synced offset. An error can be one of the following.
- WAL record checksum mismatch. This can result from both corruption of synced data and dropping of unsynced data during shutdown. We cannot be sure which one. In order not to defeat the original motivation to permit the latter case, we keep the original behavior of point-in-time WAL recovery.
- IOError. This means the WAL can be bad, an indicator of whole file becoming unavailable, not to mention synced part of the WAL. Therefore, we choose to modify the behavior of point-in-time recovery and fail the database recovery.
Test plan (devserver):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6963
Reviewed By: ajkr
Differential Revision: D22011083
Pulled By: riversand963
fbshipit-source-id: f9cbf29a37dc5cc40d3fa62f89eed1ad67ca1536
Summary:
https://github.com/facebook/rocksdb/pull/6901 subtly changed the handling of the corner case
when a table file is deleted from a level, then re-added to the same level. (Note: this
should be extremely rare; one scenario that comes to mind is a trivial move followed by
a call to `ReFitLevel` that moves the file back to the original level.) Before that change,
a new `FileMetaData` object was created as a result of this sequence; after the change,
the original `FileMetaData` was essentially resurrected (since the deletion and the addition
simply cancel each other out with the change). This patch restores the original behavior,
which is more intuitive considering the interface, and in sync with how trivial moves are handled.
(Also note that `FileMetaData` contains some mutable data members, the values of which
might be different in the resurrected object and the freshly created one.)
The PR also fixes a bug in this area: with the original pre-6901 code, `VersionBuilder`
would add the same file twice to the same level in the scenario described above.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6939
Test Plan: `make check`
Reviewed By: ajkr
Differential Revision: D21905580
Pulled By: ltamasi
fbshipit-source-id: da07ae45384ecf3c6c53506d106432d88a7ec9df
Summary:
`DBTest2.CompressionFailures` currently tests many configurations
sequentially using nested loops, which often leads to timeouts
in our test system. The patch turns it into a parameterized test
instead.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6968
Test Plan: `make check`
Reviewed By: siying
Differential Revision: D22006954
Pulled By: ltamasi
fbshipit-source-id: f71f2f7108086b7651ecfce3d79a7fab24620b2c
Summary:
Application can ingest SST files with file checksum information, such that during ingestion, DB is able to check data integrity and identify of the SST file. The PR introduces generate_and_verify_file_checksum to IngestExternalFileOption to control if the ingested checksum information should be verified with the generated checksum.
1. If generate_and_verify_file_checksum options is *FALSE*: *1)* if DB does not enable SST file checksum, the checksum information ingested will be ignored; *2)* if DB enables the SST file checksum and the checksum function name matches the checksum function name in DB, we trust the ingested checksum, store it in Manifest. If the checksum function name does not match, we treat that as an error and fail the IngestExternalFile() call.
2. If generate_and_verify_file_checksum options is *TRUE*: *1)* if DB does not enable SST file checksum, the checksum information ingested will be ignored; *2)* if DB enable the SST file checksum, we will use the checksum generator from DB to calculate the checksum for each ingested SST files after they are copied or moved. Then, compare the checksum results with the ingested checksum information: _A)_ if the checksum function name does not match, _verification always report true_ and we store the DB generated checksum information in Manifest. _B)_ if the checksum function name mach, and checksum match, ingestion continues and stores the checksum information in the Manifest. Otherwise, terminate file ingestion and report file corruption.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6891
Test Plan: added unit test, pass make asan_check
Reviewed By: pdillinger
Differential Revision: D21935988
Pulled By: zhichao-cao
fbshipit-source-id: 7b55f486632db467e76d72602218d0658aa7f6ed
Summary:
This is required so that the test cases can safely be run in parallel.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6962
Test Plan: `make check`
Reviewed By: zhichao-cao
Differential Revision: D21980060
Pulled By: ltamasi
fbshipit-source-id: 616b7a0b686155d3874848b9098c67ad3f47efcc
Summary:
Memory pinned by `pin_l0_filter_and_index_blocks_in_cache` needs to be predictable based on user config. This PR makes sure
we do not pin extra memory for large files generated by intra-L0 (see https://github.com/facebook/rocksdb/issues/6889).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6911
Test Plan: unit test
Reviewed By: siying
Differential Revision: D21835818
Pulled By: ajkr
fbshipit-source-id: a11a088549d06bed8aacc2548d266e5983f0ead4
Summary:
When MultiGet is called with duplicate keys, and the key matches the
largest key in an SST file and the value type is merge, only the first
instance of the duplicate key is returned with correct results. This is
due to the incorrect assumption that if a key in a batch is equal to the
largest key in the file, the next key cannot be present in that file.
Tests:
Add a new unit test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6953
Reviewed By: cheng-chang
Differential Revision: D21935898
Pulled By: anand1976
fbshipit-source-id: a2cc327a15150e23fd997546ca64d1c33021cb4c
Summary:
The patch adds a convenience method `GetFileMetaDataByNumber` that
builds on the `FileLocation` functionality introduced recently (see
https://github.com/facebook/rocksdb/pull/6862). This method makes it possible to
retrieve the `FileMetaData` directly as opposed to having to go through
`LevelFiles` and friends.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6940
Test Plan: `make check`
Reviewed By: cheng-chang
Differential Revision: D21905946
Pulled By: ltamasi
fbshipit-source-id: af99e19de21242b2b4a87594a535c6028d16ee72
Summary:
In db_options.c, we should avoid including header files in the `db` directory to avoid introducing unnecessary dependency. The reason why `version_edit.h` has been included in `db_options.cc` is because we need two constants, `kUnknownChecksum` and `kUnknownChecksumFuncName`. We can put these two constants as `constexpr` in the public header `file_checksum.h`.
Test plan (devserver):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6952
Reviewed By: zhichao-cao
Differential Revision: D21925341
Pulled By: riversand963
fbshipit-source-id: 2902f3b74c97f0cf16c58ad24c095c787c3a40e2
Summary:
RocksDB is an embedded library; we should not write to the application's
console. Note: in each case, the same information is returned in the form of a
`Status::Corruption` object.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6948
Test Plan: `make check`
Reviewed By: ajkr
Differential Revision: D21914965
Pulled By: ltamasi
fbshipit-source-id: ae4b66789aa6b659eb8cc2ed4a048187962c86cc
Summary:
We currently do not have any validation that would ensure that the `FileMetaData`
objects are equivalent when a file gets deleted from the LSM tree and then re-added
(think trivial moves); however, if we did, this test case would be in violation. The patch
changes the values used in the test case so they are consistent.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6942
Test Plan: `make check`
Reviewed By: zhichao-cao
Differential Revision: D21911366
Pulled By: ltamasi
fbshipit-source-id: 2f0486f8337373a6a111b6f28433d70507857104
