Summary:
file_reader_writer.h and .cc contain several files and helper function, and it's hard to navigate. Separate it to multiple files and put them under file/
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5803
Test Plan: Build whole project using make and cmake.
Differential Revision: D17374550
fbshipit-source-id: 10efca907721e7a78ed25bbf74dc5410dea05987
Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022
Differential Revision: D14394062
Pulled By: miasantreble
fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
Summary:
This PR adds more callers for table readers. These information are only used for block cache analysis so that we can know which caller accesses a block.
1. It renames the BlockCacheLookupCaller to TableReaderCaller as passing the caller from upstream requires changes to table_reader.h and TableReaderCaller is a more appropriate name.
2. It adds more table reader callers in table/table_reader_caller.h, e.g., kCompactionRefill, kExternalSSTIngestion, and kBuildTable.
This PR is long as it requires modification of interfaces in table_reader.h, e.g., NewIterator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5454
Test Plan: make clean && COMPILE_WITH_ASAN=1 make check -j32.
Differential Revision: D15819451
Pulled By: HaoyuHuang
fbshipit-source-id: b6caa704c8fb96ddd15b9a934b7e7ea87f88092d
Summary:
This PR integrates the block cache tracer class into db_impl.cc.
db_impl.cc contains a member variable of AtomicBlockCacheTraceWriter class and passes its reference to the block_based_table_reader.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5433
Differential Revision: D15728016
Pulled By: HaoyuHuang
fbshipit-source-id: 23d5659e8c82d556833dcc1a5558aac8c1f7db71
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
util/ means for lower level libraries, so it's a good idea to move the files which requires knowledge to DB out. Create a file/ and move some files there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5375
Differential Revision: D15550935
Pulled By: siying
fbshipit-source-id: 61a9715dcde5386eebfb43e93f847bba1ae0d3f2
Summary:
This PR allows RocksDB to run in single-primary, multi-secondary process mode.
The writer is a regular RocksDB (e.g. an `DBImpl`) instance playing the role of a primary.
Multiple `DBImplSecondary` processes (secondaries) share the same set of SST files, MANIFEST, WAL files with the primary. Secondaries tail the MANIFEST of the primary and apply updates to their own in-memory state of the file system, e.g. `VersionStorageInfo`.
This PR has several components:
1. (Originally in #4745). Add a `PathNotFound` subcode to `IOError` to denote the failure when a secondary tries to open a file which has been deleted by the primary.
2. (Similar to #4602). Add `FragmentBufferedReader` to handle partially-read, trailing record at the end of a log from where future read can continue.
3. (Originally in #4710 and #4820). Add implementation of the secondary, i.e. `DBImplSecondary`.
3.1 Tail the primary's MANIFEST during recovery.
3.2 Tail the primary's MANIFEST during normal processing by calling `ReadAndApply`.
3.3 Tailing WAL will be in a future PR.
4. Add an example in 'examples/multi_processes_example.cc' to demonstrate the usage of secondary RocksDB instance in a multi-process setting. Instructions to run the example can be found at the beginning of the source code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4899
Differential Revision: D14510945
Pulled By: riversand963
fbshipit-source-id: 4ac1c5693e6012ad23f7b4b42d3c374fecbe8886
Summary:
This is a feature to sample data-block compressibility and and report them as stats. 1 in N (tunable) blocks is sampled for compressibility using two algorithms:
1. lz4 or snappy for fast compression
2. zstd or zlib for slow but higher compression.
The stats are reported to the caller as raw-bytes and compressed-bytes. The block continues to be compressed for storage using the specified CompressionType.
The db_bench_tool how has a command line option for specifying the sampling rate. It's default value is 0 (no sampling). To test the overhead for a certain value, users can compare the performance of db_bench_tool, varying the sampling rate. It is unlikely to have a noticeable impact for high values like 20.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4842
Differential Revision: D13629011
Pulled By: shobhitdayal
fbshipit-source-id: 14ca668bcab6499b2a1734edf848eb62a4f4fafa
Summary:
RangeDelAggregatorV2 now supports ShouldDelete calls on
snapshot stripes and creation of range tombstone compaction iterators.
RangeDelAggregator is no longer used on any non-test code path, and will
be removed in a future commit.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4758
Differential Revision: D13439254
Pulled By: abhimadan
fbshipit-source-id: fe105bcf8e3d4a2df37a622d5510843cd71b0401
Summary:
there is chance that
* the caller tries to repair the db when holding the db_lock, in
that case the env implementation might not set the `lock`
parameter of Repairer::Run().
* the caller somehow never calls Repairer::Run().
either way, the desctructor of Repair will compare the uninitialized
db_lock_ with nullptr, and tries to unlock it. there is good chance
that the db_lock_ is not nullptr, then boom.
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4683
Differential Revision: D13260287
Pulled By: riversand963
fbshipit-source-id: 878a119d2e9f10a0fa17ee62cf3fb24b33d49fa5
Summary:
Removed `one_time_use` flag, which removed the need for some
tests, and changed all `NewRangeTombstoneIterator` methods to return
`FragmentedRangeTombstoneIterators`.
These changes also led to removing `RangeDelAggregatorV2::AddUnfragmentedTombstones`
and one of the `MemTableListVersion::AddRangeTombstoneIterators` methods.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4692
Differential Revision: D13106570
Pulled By: abhimadan
fbshipit-source-id: cbab5432d7fc2d9cdfd8d9d40361a1bffaa8f845
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
Current `log::Reader` does not perform retry after encountering `EOF`. In the future, we need the log reader to be able to retry tailing the log even after `EOF`.
Current implementation is simple. It does not provide more advanced retry policies. Will address this in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4394
Differential Revision: D9926508
Pulled By: riversand963
fbshipit-source-id: d86d145792a41bd64a72f642a2a08c7b7b5201e1
Summary:
This commit adds code to acquire lock on the DB LOCK file
before starting the repair process. This will prevent
multiple processes from performing repair on the same DB
simultaneously. Fixes repair_test to work with this change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4435
Differential Revision: D10361499
Pulled By: riversand963
fbshipit-source-id: 3c512c48b7193d383b2279ccecabdb660ac1cf22
Summary:
The code is dead in RocksDB as `log::Reader::initial_offset_` is always zero. We should delete it so we don't have to maintain it like in #4359.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4362
Differential Revision: D9817829
Pulled By: ajkr
fbshipit-source-id: 474a2c679e5bd273b40608f3a5332931d9eefe6d
Summary:
Do not consider the range tombstone sentinel key as causing 2 adjacent
sstables in a level to overlap. When a range tombstone's end key is the
largest key in an sstable, the sstable's end key is so to a "sentinel"
value that is the smallest key in the next sstable with a sequence
number of kMaxSequenceNumber. This "sentinel" is guaranteed to not
overlap in internal-key space with the next sstable. Unfortunately,
GetOverlappingFiles uses user-keys to determine overlap and was thus
considering 2 adjacent sstables in a level to overlap if they were
separated by this sentinel key. This in turn would cause compactions to
be larger than necessary.
Note that this conflicts with
https://github.com/facebook/rocksdb/pull/2769 and cases
`DBRangeDelTest.CompactionTreatsSplitInputLevelDeletionAtomically` to
fail.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4050
Differential Revision: D8844423
Pulled By: ajkr
fbshipit-source-id: df3f9f1db8f4cff2bff77376b98b83c2ae1d155b
Summary:
We potentially need this information for tracing, profiling and diagnosis.
Closes https://github.com/facebook/rocksdb/pull/4026
Differential Revision: D8555214
Pulled By: riversand963
fbshipit-source-id: 4263e06c00b6d5410b46aa46eb4e358ff2161dd2
Summary:
Currently it is not possible to change bloom filter config without restart the db, which is causing a lot of operational complexity for users.
This PR aims to make it possible to dynamically change bloom filter config.
Closes https://github.com/facebook/rocksdb/pull/3601
Differential Revision: D7253114
Pulled By: miasantreble
fbshipit-source-id: f22595437d3e0b86c95918c484502de2ceca120c
Summary:
In this change, an option to set different paths for different column families is added.
This option is set via cf_paths setting of ColumnFamilyOptions. This option will work in a similar fashion to db_paths setting. Cf_paths is a vector of Dbpath values which contains a pair of the absolute path and target size. Multiple levels in a Column family can go to different paths if cf_paths has more than one path.
To maintain backward compatibility, if cf_paths is not specified for a column family, db_paths setting will be used. Note that, if db_paths setting is also not specified, RocksDB already has code to use db_name as the only path.
Changes :
1) A new member "cf_paths" is added to ImmutableCfOptions. This is set, based on cf_paths setting of ColumnFamilyOptions and db_paths setting of ImmutableDbOptions. This member is used to identify the path information whenever files are accessed.
2) Validation checks are added for cf_paths setting based on existing checks for db_paths setting.
3) DestroyDB, PurgeObsoleteFiles etc. are edited to support multiple cf_paths.
4) Unit tests are added appropriately.
Closes https://github.com/facebook/rocksdb/pull/3102
Differential Revision: D6951697
Pulled By: ajkr
fbshipit-source-id: 60d2262862b0a8fd6605b09ccb0da32bb331787d
Summary:
Add PreReleaseCallback to be called at the end of WriteImpl but before publishing the sequence number. The callback is used in WritePrepareTxn to i) update the commit map, ii) update the last published sequence number in the 2nd write queue. It also ensures that all the commits will go to the 2nd queue.
These changes will ensure that the commit map is updated before the sequence number is published and used by reading snapshots. If we use two write queues, the snapshots will use the seq number published by the 2nd queue. If we use one write queue (the default, the snapshots will use the last seq number in the memtable, which also indicates the last published seq number.
Closes https://github.com/facebook/rocksdb/pull/3205
Differential Revision: D6438959
Pulled By: maysamyabandeh
fbshipit-source-id: f8b6c434e94bc5f5ab9cb696879d4c23e2577ab9
Summary:
Add a simple policy for NVMe write time life hint
Closes https://github.com/facebook/rocksdb/pull/3095
Differential Revision: D6298030
Pulled By: shligit
fbshipit-source-id: 9a72a42e32e92193af11599eb71f0cf77448e24d
Summary:
The file numbers assigned post-repair were sometimes smaller than older files' numbers due to `LogAndApply` saving the wrong next file number in the manifest.
- Mark the highest file seen during repair as used before `LogAndApply` so the correct next file number will be stored.
- Renamed `MarkFileNumberUsedDuringRecovery` to `MarkFileNumberUsed` since now it's used during repair in addition to during recovery
- Added `TEST_Current_Next_FileNo` to expose the next file number for the unit test.
Closes https://github.com/facebook/rocksdb/pull/2988
Differential Revision: D6018083
Pulled By: ajkr
fbshipit-source-id: 3f25cbf74439cb8f16dd12af90b67f9f9f75e718
Summary:
Update Compaction/Flush to support WritePreparedTxnDB: Add SnapshotChecker which is a proxy to query WritePreparedTxnDB::IsInSnapshot. Pass SnapshotChecker to DBImpl on WritePreparedTxnDB open. CompactionIterator use it to check if a key has been committed and if it is visible to a snapshot. In CompactionIterator:
* check if key has been committed. If not, output uncommitted keys AS-IS.
* use SnapshotChecker to check if key is visible to a snapshot when in need.
* do not output key with seq = 0 if the key is not committed.
Closes https://github.com/facebook/rocksdb/pull/2926
Differential Revision: D5902907
Pulled By: yiwu-arbug
fbshipit-source-id: 945e037fdf0aa652dc5ba0ad879461040baa0320
Summary:
SUMMARY
Moves the bytes_per_sync and wal_bytes_per_sync options from immutableoptions to mutable options. Also if wal_bytes_per_sync is changed, the wal file and memtables are flushed.
TEST PLAN
ran make check
all passed
Two new tests SetBytesPerSync, SetWalBytesPerSync check that after issuing setoptions with a new value for the var, the db options have the new value.
Closes https://github.com/facebook/rocksdb/pull/2893
Reviewed By: yiwu-arbug
Differential Revision: D5845814
Pulled By: TheRushingWookie
fbshipit-source-id: 93b52d779ce623691b546679dcd984a06d2ad1bd
Summary:
Problem:
- `DB::SanitizeOptions` strips trailing slash from `wal_dir` but not `dbname`
- We check whether `wal_dir` and `dbname` refer to the same directory using string equality: https://github.com/facebook/rocksdb/blob/master/db/repair.cc#L258
- Providing `dbname` with trailing slash causes default `wal_dir` to be misidentified as a separate directory.
- Then the repair tries to add all SST files to the `VersionEdit` twice (once for `dbname` dir, once for `wal_dir`) and fails with coredump.
Solution:
- Add a new `Env` function, `AreFilesSame`, which uses device and inode number to check whether files are the same. It's currently only implemented in `PosixEnv`.
- Migrate repair to use `AreFilesSame` to check whether `dbname` and `wal_dir` are same. If unsupported, falls back to string comparison.
Closes https://github.com/facebook/rocksdb/pull/2827
Differential Revision: D5761349
Pulled By: ajkr
fbshipit-source-id: c839d548678b742af1166d60b09abd94e5476238
Summary:
We should search wal_dir in Repairer::FindFiles function, and avoid use
LogFileNmae(dbname, number) to get WAL file's name, which will get a wrong
WAL filename. as following:
```
[WARN] [/home/liuchang/Workspace/rocksdb/db/repair.cc:310] Log #3: ignoring conversion error: IO error: While opening a file for sequentially reading: /tmp/rocksdbtest-1000/repair_test/000003.log: No such file or directory
```
I have added a new test case to repair_test.cc, which try to repair db with all WAL options.
Signed-off-by: Chang Liu <liuchang0812@gmail.com>
Closes https://github.com/facebook/rocksdb/pull/2692
Differential Revision: D5575888
Pulled By: ajkr
fbshipit-source-id: 5b93e9f85cddc01663ccecd87631fa723ac466a3
Summary:
Valgrind had false positive complaints about the initialization pattern for `GetCurrentTime()`'s argument in #2480. We can instead have the client initialize the time variable before calling `GetCurrentTime()`, and have `GetCurrentTime()` promise to only overwrite it in success case.
Closes https://github.com/facebook/rocksdb/pull/2526
Differential Revision: D5358689
Pulled By: ajkr
fbshipit-source-id: 857b189f24c19196f6bb299216f3e23e7bc4be42
Summary:
Introducing FIFO compactions with TTL.
FIFO compaction is based on size only which makes it tricky to enable in production as use cases can have organic growth. A user requested an option to drop files based on the time of their creation instead of the total size.
To address that request:
- Added a new TTL option to FIFO compaction options.
- Updated FIFO compaction score to take TTL into consideration.
- Added a new table property, creation_time, to keep track of when the SST file is created.
- Creation_time is set as below:
- On Flush: Set to the time of flush.
- On Compaction: Set to the max creation_time of all the files involved in the compaction.
- On Repair and Recovery: Set to the time of repair/recovery.
- Old files created prior to this code change will have a creation_time of 0.
- FIFO compaction with TTL is enabled when ttl > 0. All files older than ttl will be deleted during compaction. i.e. `if (file.creation_time < (current_time - ttl)) then delete(file)`. This will enable cases where you might want to delete all files older than, say, 1 day.
- FIFO compaction will fall back to the prior way of deleting files based on size if:
- the creation_time of all files involved in compaction is 0.
- the total size (of all SST files combined) does not drop below `compaction_options_fifo.max_table_files_size` even if the files older than ttl are deleted.
This feature is not supported if max_open_files != -1 or with table formats other than Block-based.
**Test Plan:**
Added tests.
**Benchmark results:**
Base: FIFO with max size: 100MB ::
```
svemuri@dev15905 ~/rocksdb (fifo-compaction) $ TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=readwhilewriting --num=5000000 --threads=16 --compaction_style=2 --fifo_compaction_max_table_files_size_mb=100
readwhilewriting : 1.924 micros/op 519858 ops/sec; 13.6 MB/s (1176277 of 5000000 found)
```
With TTL (a low one for testing) ::
```
svemuri@dev15905 ~/rocksdb (fifo-compaction) $ TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=readwhilewriting --num=5000000 --threads=16 --compaction_style=2 --fifo_compaction_max_table_files_size_mb=100 --fifo_compaction_ttl=20
readwhilewriting : 1.902 micros/op 525817 ops/sec; 13.7 MB/s (1185057 of 5000000 found)
```
Example Log lines:
```
2017/06/26-15:17:24.609249 7fd5a45ff700 (Original Log Time 2017/06/26-15:17:24.609177) [db/compaction_picker.cc:1471] [default] FIFO compaction: picking file 40 with creation time 1498515423 for deletion
2017/06/26-15:17:24.609255 7fd5a45ff700 (Original Log Time 2017/06/26-15:17:24.609234) [db/db_impl_compaction_flush.cc:1541] [default] Deleted 1 files
...
2017/06/26-15:17:25.553185 7fd5a61a5800 [DEBUG] [db/db_impl_files.cc:309] [JOB 0] Delete /dev/shm/dbbench/000040.sst type=2 #40 -- OK
2017/06/26-15:17:25.553205 7fd5a61a5800 EVENT_LOG_v1 {"time_micros": 1498515445553199, "job": 0, "event": "table_file_deletion", "file_number": 40}
```
SST Files remaining in the dbbench dir, after db_bench execution completed:
```
svemuri@dev15905 ~/rocksdb (fifo-compaction) $ ls -l /dev/shm//dbbench/*.sst
-rw-r--r--. 1 svemuri users 30749887 Jun 26 15:17 /dev/shm//dbbench/000042.sst
-rw-r--r--. 1 svemuri users 30768779 Jun 26 15:17 /dev/shm//dbbench/000044.sst
-rw-r--r--. 1 svemuri users 30757481 Jun 26 15:17 /dev/shm//dbbench/000046.sst
```
Closes https://github.com/facebook/rocksdb/pull/2480
Differential Revision: D5305116
Pulled By: sagar0
fbshipit-source-id: 3e5cfcf5dd07ed2211b5b37492eb235b45139174
Summary:
Throughput: 46k tps in our sysbench settings (filling the details later)
The idea is to have the simplest change that gives us a reasonable boost
in 2PC throughput.
Major design changes:
1. The WAL file internal buffer is not flushed after each write. Instead
it is flushed before critical operations (WAL copy via fs) or when
FlushWAL is called by MySQL. Flushing the WAL buffer is also protected
via mutex_.
2. Use two sequence numbers: last seq, and last seq for write. Last seq
is the last visible sequence number for reads. Last seq for write is the
next sequence number that should be used to write to WAL/memtable. This
allows to have a memtable write be in parallel to WAL writes.
3. BatchGroup is not used for writes. This means that we can have
parallel writers which changes a major assumption in the code base. To
accommodate for that i) allow only 1 WriteImpl that intends to write to
memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes
come via group commit phase which is serial anyway, ii) make all the
parts in the code base that assumed to be the only writer (via
EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are
protected via a stat_mutex_.
Note: the first commit has the approach figured out but is not clean.
Submitting the PR anyway to get the early feedback on the approach. If
we are ok with the approach I will go ahead with this updates:
0) Rebase with Yi's pipelining changes
1) Currently batching is disabled by default to make sure that it will be
consistent with all unit tests. Will make this optional via a config.
2) A couple of unit tests are disabled. They need to be updated with the
serial commit of 2PC taken into account.
3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires
releasing mutex_ beforehand (the same way EnterUnbatched does). This
needs to be cleaned up.
Closes https://github.com/facebook/rocksdb/pull/2345
Differential Revision: D5210732
Pulled By: maysamyabandeh
fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
Summary:
Disable direct reads for log and manifest. Direct reads should not affect sequential_file
Also add kDirectIO for option_config_ in db_test_util
Closes https://github.com/facebook/rocksdb/pull/2337
Differential Revision: D5100261
Pulled By: lightmark
fbshipit-source-id: 0ebfd13b93fa1b8f9acae514ac44f8125a05868b
Summary:
Replace Options::use_direct_writes with Options::use_direct_io_for_flush_and_compaction
Now if Options::use_direct_io_for_flush_and_compaction = true, we will enable direct io for both reads and writes for flush and compaction job. Whereas Options::use_direct_reads controls user reads like iterator and Get().
Closes https://github.com/facebook/rocksdb/pull/2117
Differential Revision: D4860912
Pulled By: lightmark
fbshipit-source-id: d93575a8a5e780cf7e40797287edc425ee648c19
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
Summary:
It is confusing to have auto_roll_logger to stay under db/, which has nothing to do with database. Move filename together as it is a dependency.
Closes https://github.com/facebook/rocksdb/pull/2080
Differential Revision: D4821141
Pulled By: siying
fbshipit-source-id: ca7d768
Summary:
Record the first parsed sequence number as the minimum
so we can find the true minimum otherwise everything is larger than zero.
Fix the comparator name comparision.
Closes https://github.com/facebook/rocksdb/pull/1858
Differential Revision: D4544365
Pulled By: ajkr
fbshipit-source-id: 439cbc2
Summary:
The Arena construction/destruction introduced significant overhead to read-heavy workload just by creating empty vectors for its blocks, so avoid it in RangeDelAggregator.
Closes https://github.com/facebook/rocksdb/pull/1547
Differential Revision: D4207781
Pulled By: ajkr
fbshipit-source-id: 9d1c130
Summary:
Previously we used TableCache::NewIterator() for multiple purposes (data
block iterator and range deletion iterator), and returned non-ok status in
the data block iterator. In one case where the caller only used the range
deletion block iterator (9e7cf3469b/db/version_set.cc (L965-L973)),
we didn't check/free the data block iterator containing non-ok status, which
caused a valgrind error.
So, this diff decouples creation of data block and range deletion block iterators,
and updates the callers accordingly. Both functions can return non-ok status
in an InternalIterator. Since the non-ok status is returned in an iterator that the
callers will definitely use, it should be more usable/less error-prone.
Closes https://github.com/facebook/rocksdb/pull/1513
Differential Revision: D4181423
Pulled By: ajkr
fbshipit-source-id: 835b8f5
Summary:
Changed BuildTable() (used for flush) to (1) add range
tombstones to the aggregator, which is used by CompactionIterator to
determine which keys can be removed; and (2) add aggregator's range
tombstones to the table that is output for the flush.
Closes https://github.com/facebook/rocksdb/pull/1438
Differential Revision: D4100025
Pulled By: ajkr
fbshipit-source-id: cb01a70
Summary: Use ImmutableDBOptions/MutableDBOptions internally and DBOptions only for user-facing APIs. MutableDBOptions is barely a placeholder for now. I'll start to move options to MutableDBOptions in following diffs.
Test Plan:
make all check
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64065
Summary:
* Change constructor of MutableCFOptions to depends only on ColumnFamilyOptions.
* Move `max_subcompactions`, `compaction_options_fifo` and `compaction_pri` to ImmutableCFOptions to make it clear that they are immutable.
Test Plan: existing unit tests.
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63945
Summary: There's no reference to ImmutableCFOptions elsewhere in /include/rocksdb. ImmutableCFOptions was introduced in this commit (5665e5e285) but later its reference in /include/rocksdb/table.h is removed.
Test Plan:
make all check
Reviewers: IslamAbdelRahman, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: yhchiang, andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63177
Summary: Add option write_buffer_manager to help users control total memory spent on memtables across multiple DB instances.
Test Plan: Add a new unit test.
Reviewers: yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: adela, benj, sumeet, muthu, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59925
