Summary:
Use super_version insider NewIterator to avoid Ref() each component
separately under mutex
The new added bench shows NewIterator QPS increases from 515K to 719K
No meaningful improvement for multiget I guess due to its relatively small
cost comparing to 90 keys fetch in the test.
Test Plan: unit test and db_bench
Reviewers: igor, sdong
Reviewed By: igor
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D15609
Summary:
In DBImpl we keep track of some statistics internally and expose them via GetProperty(). This diff encapsulates all the internal statistics into a class InternalStatisics. Most of it is copy/paste.
Apart from cleaning up db_impl.cc, this diff is also necessary for Column families, since every column family should have its own CompactionStats, MakeRoomForWrite-stall stats, etc. It's much easier to keep track of it in every column family if it's nicely encapsulated in its own class.
Test Plan: make check
Reviewers: dhruba, kailiu, haobo, sdong, emayanke
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15273
Summary:
@dhruba, I'm not sure where we need to sync the directory. I implemented the function in Env() and added the dir sync just after we close the newly created file in the builder.
Should I also add FsyncDir() to new files that get created by a compaction?
Test Plan: Confirmed that FsyncDir is returning Status::OK()
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D14751
Summary:
MemTableListVersion is to MemTableList what Version is to VersionSet. I took almost the same ideas to develop MemTableListVersion. The reason is to have copying std::list done in background, while flushing, rather than in foreground (MultiGet() and NewIterator()) under a mutex! Also, whenever we copied MemTableList, we copied also some MemTableList metadata (flush_requested_, commit_in_progress_, etc.), which was wasteful.
This diff avoids std::list copy under a mutex in both MultiGet() and NewIterator(). I created a small database with some number of immutable memtables, and creating 100.000 iterators in a single-thread (!) decreased from {188739, 215703, 198028} to {154352, 164035, 159817}. A lot of the savings come from code under a mutex, so we should see much higher savings with multiple threads. Creating new iterator is very important to LogDevice team.
I also think this diff will make SuperVersion obsolete for performance reasons. I will try it in the next diff. SuperVersion gave us huge savings on Get() code path, but I think that most of the savings came from copying MemTableList under a mutex. If we had MemTableListVersion, we would never need to copy the entire object (like we still do in NewIterator() and MultiGet())
Test Plan: `make check` works. I will also do `make valgrind_check` before commit
Reviewers: dhruba, haobo, kailiu, sdong, emayanke, tnovak
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15255
Summary: as title
Test Plan:
make all check
What else tests shall I cover?
Reviewers: igor, haobo
CC:
Differential Revision: https://reviews.facebook.net/D15339
Summary:
This diff implements a special type of iterator that doesn't create a snapshot
(can be used to read newly inserted data) and is optimized for doing sequential
reads.
TailingIterator uses current superversion number to determine whether to
invalidate its internal iterators. If the version hasn't changed, it can often
avoid doing expensive seeks over immutable structures (sst files and immutable
memtables).
Test Plan:
* new unit tests
* running LD with this patch
Reviewers: igor, dhruba, haobo, sdong, kailiu
Reviewed By: sdong
CC: leveldb, lovro, march
Differential Revision: https://reviews.facebook.net/D15285
Summary:
This diff does two things:
* Rethinks how we call Recover() with read_only option. Before, we call it with pointer to memtable where we'd like to apply those changes to. This memtable is set in db_impl_readonly.cc and it's actually DBImpl::mem_. Why don't we just apply updates to mem_ right away? It seems more intuitive.
* Changes when we apply updates to manifest. Before, the process is to recover all the logs, flush it to sst files and then do one giant commit that atomically adds all recovered sst files and sets the next log number. This works good enough, but causes some small troubles for my column family approach, since I can't have one VersionEdit apply to more than single column family[1]. The change here is to commit the files recovered from logs right away. Here is the state of the world before the change:
1. Recover log 5, add new sst files to edit
2. Recover log 7, add new sst files to edit
3. Recover log 8, add new sst files to edit
4. Commit all added sst files to manifest and mark log files 5, 7 and 8 as recoverd (via SetLogNumber(9) function)
After the change, we'll do:
1. Recover log 5, commit the new sst files and set log 5 as recovered
2. Recover log 7, commit the new sst files and set log 7 as recovered
3. Recover log 8, commit the new sst files and set log 8 as recovered
The added (small) benefit is that if we fail after (2), the new recovery will only have to recover log 8. In previous case, we'll have to restart the recovery from the beginning. The bigger benefit will be to enable easier integration of multiple column families in Recovery code path.
[1] I'm happy to dicuss this decison, but I believe this is the cleanest way to go. It also makes backward compatibility much easier. We don't have a requirement of adding multiple column families atomically.
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15237
Summary:
This had a few bugs.
1) bottom and top were reversed. top is for the max value but the callers were passing the max
value to bottom. The result is that the max sleep is used when n >= bottom.
2) one of the callers passed values with type double and these values are frequently between
1.0 and 2.0 so rounding will do some bad things
3) sometimes the function returned 0 when there should be a stall
With this change and one other diff (out for review soon) there are slightly fewer stalls on one workload.
With the fix.
Stalls(secs): 160.166 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 58.495 leveln_slowdown
Stalls(count): 910261 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 54526 leveln_slowdown
Without the fix.
Stalls(secs): 172.227 level0_slowdown, 0.000 level0_numfiles, 0.000 memtable_compaction, 56.538 leveln_slowdown
Stalls(count): 160831 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 52845 leveln_slowdown
Task ID: #
Blame Rev:
Test Plan:
run db_bench for --benchmarks=overwrite with IO-bound database
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15243
Summary:
There were some functions in VersionSet that had no reason to be there instead of Version. Moving them to Version will make column families implementation easier.
The functions moved are:
* NumLevelBytes
* LevelSummary
* LevelFileSummary
* MaxNextLevelOverlappingBytes
* AddLiveFiles (previously AddLiveFilesCurrentVersion())
* NeedSlowdownForNumLevel0Files
The diff continues on (and depends on) D15171
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong, emayanke
Reviewed By: sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15183
Summary:
When doing CompactRange(), we should first flush the memtable and then calculate max_level_with_files. Also, we want to compact all the levels that have files, including level `max_level_with_files`.
This patch fixed the unit test.
Test Plan: Added a failing unit test and a fix, so it's not failing anymore.
Reviewers: dhruba, haobo, sdong
Reviewed By: haobo
CC: leveldb, xjin
Differential Revision: https://reviews.facebook.net/D14421
Summary: When building batch group, don't actually build a new batch since it requires heavy-weight mem copy and malloc. Only store references to the batches and build the batch group without lock held.
Test Plan:
`make check`
I am also planning to run performance tests. The workload that will benefit from this change is readwhilewriting. I will post the results once I have them.
Reviewers: dhruba, haobo, kailiu
Reviewed By: haobo
CC: leveldb, xjin
Differential Revision: https://reviews.facebook.net/D15063
Summary:
Code was always compressing L0 files written by a memtable flush
when compression was enabled. Now this is done when
min_level_to_compress=0 for leveled compaction and when
universal_compaction_size_percent=-1 for universal compaction.
Task ID: #3416472
Blame Rev:
Test Plan:
ran db_bench with compression options
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: dhruba, igor, sdong
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14757
Summary:
The way DBImpl::TEST_CompactRange() throttles down the number of bg compactions
can cause it to deadlock when CompactRange() is called concurrently from
multiple threads. Imagine a following scenario with only two threads
(max_background_compactions is 10 and bg_compaction_scheduled_ is initially 0):
1. Thread #1 increments bg_compaction_scheduled_ (to LargeNumber), sets
bg_compaction_scheduled_ to 9 (newvalue), schedules the compaction
(bg_compaction_scheduled_ is now 10) and waits for it to complete.
2. Thread #2 calls TEST_CompactRange(), increments bg_compaction_scheduled_
(now LargeNumber + 10) and waits on a cv for bg_compaction_scheduled_ to
drop to LargeNumber.
3. BG thread completes the first manual compaction, decrements
bg_compaction_scheduled_ and wakes up all threads waiting on bg_cv_.
Thread #1 runs, increments bg_compaction_scheduled_ by LargeNumber again
(now 2*LargeNumber + 9). Since that's more than LargeNumber + newvalue,
thread #2 also goes to sleep (waiting on bg_cv_), without resetting
bg_compaction_scheduled_.
This diff attempts to address the problem by introducing a new counter
bg_manual_only_ (when positive, MaybeScheduleFlushOrCompaction() will only
schedule manual compactions).
Test Plan:
I could pretty much consistently reproduce the deadlock with a program that
calls CompactRange(nullptr, nullptr) immediately after Write() from multiple
threads. This no longer happens with this patch.
Tests (make check) pass.
Reviewers: dhruba, igor, sdong, haobo
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14799
Summary:
We don't want two threads to clash if they concurrently call DisableFileDeletions() and EnableFileDeletions(). I'm adding a counter that will enable file deletions only after all DisableFileDeletions() calls have been negated with EnableFileDeletions().
However, we also don't want to break the old behavior, so I added a parameter force to EnableFileDeletions(). If force is true, we will still enable file deletions after every call to EnableFileDeletions(), which is what is happening now.
Test Plan: make check
Reviewers: dhruba, haobo, sanketh
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14781
Summary:
Instead of locking and saving a DB state, we can cache a DB state and update it only when it changes. This change reduces lock contention and speeds up read operations on the DB.
Performance improvements are substantial, although there is some cost in no-read workloads. I ran the regression tests on my devserver and here are the numbers:
overwrite 56345 -> 63001
fillseq 193730 -> 185296
readrandom 771301 -> 1219803 (58% improvement!)
readrandom_smallblockcache 677609 -> 862850
readrandom_memtable_sst 710440 -> 1109223
readrandom_fillunique_random 221589 -> 247869
memtablefillrandom 105286 -> 92643
memtablereadrandom 763033 -> 1288862
Test Plan:
make asan_check
I am also running db_stress
Reviewers: dhruba, haobo, sdong, kailiu
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14679
Summary:
In this diff I present you BackupableDB v1. You can easily use it to backup your DB and it will do incremental snapshots for you.
Let's first describe how you would use BackupableDB. It's inheriting StackableDB interface so you can easily construct it with your DB object -- it will add a method RollTheSnapshot() to the DB object. When you call RollTheSnapshot(), current snapshot of the DB will be stored in the backup dir. To restore, you can just call RestoreDBFromBackup() on a BackupableDB (which is a static method) and it will restore all files from the backup dir. In the next version, it will even support automatic backuping every X minutes.
There are multiple things you can configure:
1. backup_env and db_env can be different, which is awesome because then you can easily backup to HDFS or wherever you feel like.
2. sync - if true, it *guarantees* backup consistency on machine reboot
3. number of snapshots to keep - this will keep last N snapshots around if you want, for some reason, be able to restore from an earlier snapshot. All the backuping is done in incremental fashion - if we already have 00010.sst, we will not copy it again. *IMPORTANT* -- This is based on assumption that 00010.sst never changes - two files named 00010.sst from the same DB will always be exactly the same. Is this true? I always copy manifest, current and log files.
4. You can decide if you want to flush the memtables before you backup, or you're fine with backing up the log files -- either way, you get a complete and consistent view of the database at a time of backup.
5. More things you can find in BackupableDBOptions
Here is the directory structure I use:
backup_dir/CURRENT_SNAPSHOT - just 4 bytes holding the latest snapshot
0, 1, 2, ... - files containing serialized version of each snapshot - containing a list of files
files/*.sst - sst files shared between snapshots - if one snapshot references 00010.sst and another one needs to backup it from the DB, it will just reference the same file
files/ 0/, 1/, 2/, ... - snapshot directories containing private snapshot files - current, manifest and log files
All the files are ref counted and deleted immediatelly when they get out of scope.
Some other stuff in this diff:
1. Added GetEnv() method to the DB. Discussed with @haobo and we agreed that it seems right thing to do.
2. Fixed StackableDB interface. The way it was set up before, I was not able to implement BackupableDB.
Test Plan:
I have a unittest, but please don't look at this yet. I just hacked it up to help me with debugging. I will write a lot of good tests and update the diff.
Also, `make asan_check`
Reviewers: dhruba, haobo, emayanke
Reviewed By: dhruba
CC: leveldb, haobo
Differential Revision: https://reviews.facebook.net/D14295
Summary: This would enable rocksdb users to get the db identity without depending on implementation details(storing that in IDENTITY file)
Test Plan: db/db_test (has identity checks)
Reviewers: dhruba, haobo, igor, kailiu
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14463
Summary:
I went through all remaining shared_ptrs and removed the ones that I found not-necessary. Only GenerateCachePrefix() is called fairly often, so don't expect much perf wins.
The ones that are left are accessed infrequently and I think we're fine with keeping them.
Test Plan: make asan_check
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14427
Summary:
The commit at 27bbef1180 had a memory leak
that was detected by valgrind. The memtable that has a refcount decrement
in MemTableList::InstallMemtableFlushResults was not freed.
Test Plan: valgrind ./db_test --leak-check=full
Reviewers: igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14391
Summary: We need access to options for BackupableDB
Test Plan: make check
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb, reconnect.grayhat
Differential Revision: https://reviews.facebook.net/D14331
Summary: This is part of https://reviews.facebook.net/D14295 -- smaller diff that is easier to review
Test Plan: make asan_check
Reviewers: dhruba, haobo, emayanke
Reviewed By: emayanke
CC: leveldb, kailiu, reconnect.grayhat
Differential Revision: https://reviews.facebook.net/D14301
Summary:
Created a unittest that verifies that automatic deletion performed by PurgeObsoleteFiles() works correctly.
Also, few small fixes on the logic part -- call version_set_->GetObsoleteFiles() in FindObsoleteFiles() instead of on some arbitrary positions.
Test Plan: Created a unit test
Reviewers: dhruba, haobo, nkg-
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14079
Summary:
@haobo's suggestions from https://reviews.facebook.net/D13827
Renaming some variables, deprecating purge_log_after_flush, changing for loop into auto for loop.
I have not implemented deleting objects outside of mutex yet because it would require a big code change - we would delete object in db_impl, which currently does not know anything about object because it's defined in version_edit.h (FileMetaData). We should do it at some point, though.
Test Plan: Ran deletefile_test
Reviewers: haobo
Reviewed By: haobo
CC: leveldb, haobo
Differential Revision: https://reviews.facebook.net/D14025
Summary:
Here's one solution we discussed on speeding up FindObsoleteFiles. Keep a set of all files in DBImpl and update the set every time we create a file. I probably missed few other spots where we create a file.
It might speed things up a bit, but makes code uglier. I don't really like it.
Much better approach would be to abstract all file handling to a separate class. Think of it as layer between DBImpl and Env. Having a separate class deal with file namings and deletion would benefit both code cleanliness (especially with huge DBImpl) and speed things up. It will take a huge effort to do this, though.
Let's discuss offline today.
Test Plan: Ran ./db_stress, verified that files are getting deleted
Reviewers: dhruba, haobo, kailiu, emayanke
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D13827
Summary:
Archive cleaning will still happen every WAL_ttl seconds
but archived logs will be deleted only if archive size
is greater then a WAL_size_limit value.
Empty archived logs will be deleted evety WAL_ttl.
Test Plan:
1. Unit tests pass.
2. Benchmark.
Reviewers: emayanke, dhruba, haobo, sdong, kailiu, igor
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13869
Summary:
strict essentially means that we MUST find the startsequence. Thus we should return if starteSequence is not found in the first file in case strict is set. This will take care of ending the iterator in case of permanent gaps due to corruptions in the log files
Also created NextImpl function that will have internal variable to distinguish whether Next is being called from StartSequence or by application.
Set NotFoudn::gaps status to give an indication of gaps happeneing.
Polished the inline documentation at various places
Test Plan:
* db_repl_stress test
* db_test relating to transaction log iterator
* fbcode/wormhole/rocksdb/rocks_log_iterator
* sigma production machine sigmafio032.prn1
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13689
Summary:
Rocksdb can now support a uncompressed block cache, or a compressed
block cache or both. Lookups first look for a block in the
uncompressed cache, if it is not found only then it is looked up
in the compressed cache. If it is found in the compressed cache,
then it is uncompressed and inserted into the uncompressed cache.
It is possible that the same block resides in the compressed cache
as well as the uncompressed cache at the same time. Both caches
have their own individual LRU policy.
Test Plan: Unit test case attached.
Reviewers: kailiu, sdong, haobo, leveldb
Reviewed By: haobo
CC: xjin, haobo
Differential Revision: https://reviews.facebook.net/D12675
Summary:
This patch is to address @haobo's comments on D13521:
1. rename Table to be TableReader and make its factory function to be GetTableReader
2. move the compression type selection logic out of TableBuilder but to compaction logic
3. more accurate comments
4. Move stat name constants into BlockBasedTable implementation.
5. remove some uncleaned codes in simple_table_db_test
Test Plan: pass test suites.
Reviewers: haobo, dhruba, kailiu
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13785
Summary:
This is to simplify rocksdb public APIs and improve the code quality.
Created an additional parameter to ParseFileName for log sub type and improved the code for deleting a wal file.
Wrote exhaustive unit-tests in delete_file_test
Unification of other redundant APIs can be taken up in a separate diff
Test Plan: Expanded delete_file test
Reviewers: dhruba, haobo, kailiu, sdong
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13647
Summary:
This patch adds a option for universal compaction to allow us to only compress output files if the files compacted previously did not yet reach a specified ratio, to save CPU costs in some cases.
Compression is always skipped for flushing. This is because the size information is not easy to evaluate for flushing case. We can improve it later.
Test Plan:
add test
DBTest.UniversalCompactionCompressRatio1 and DBTest.UniversalCompactionCompressRatio12
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13467
Summary:
Enable background flush thread in this patch and fix unit tests with:
(1) After background flush, schedule a background compaction if condition satisfied;
(2) Fix a bug that if universal compaction is enabled and number of levels are set to be 0, compaction will not be automatically triggered
(3) Fix unit tests to wait for compaction to finish instead of flush, before checking the compaction results.
Test Plan: pass all unit tests
Reviewers: haobo, xjin, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13461
Summary: When I debug the unit test failures when enabling background flush thread, I feel the function names can be made clearer for people to understand. Also, if the names are fixed, in many places, some tests' bugs are obvious (and some of those tests are failing). This patch is to clean it up for future maintenance.
Test Plan: Run test suites.
Reviewers: haobo, dhruba, xjin
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13431
Summary:
Change namespace from leveldb to rocksdb. This allows a single
application to link in open-source leveldb code as well as
rocksdb code into the same process.
Test Plan: compile rocksdb
Reviewers: emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13287
Summary:
As explained in comments in GetLiveFiles in db.h, this option will cause flush to be skipped in GetLiveFiles because some use-cases use GetSortedWalFiles after GetLiveFiles to generate more complete snapshots.
Using GetSortedWalFiles after GetLiveFiles allows us to not Flush in GetLiveFiles first because wals have everything.
Note: file deletions will be disabled before calling GLF or GSWF so live logs will not move to archive logs or get delted.
Note: Manifest file is truncated to a proper value in GLF, so it will always reply from the proper wal files on a restart
Test Plan: make
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13257
Summary: As title. This is just a quick hack and not ready for commit. fails a lot of unit test. I will test/debug it directly in ViewState shadow .
Test Plan: Try it in shadow test.
Reviewers: dhruba, xjin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12933
Summary: As title. The DB log file life cycle is tied up with the memtable it backs. Once the memtable is flushed to sst and committed, we should be able to delete the log file, without holding the mutex. This is part of the bigger change to avoid FindObsoleteFiles at runtime. It deals with log files. sst files will be dealt with later.
Test Plan: make check; db_bench
Reviewers: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11709
Summary:
Add new command "change_compaction_style" to ldb tool. For
universal->level, it shows "nothing to do". For level->universal, it
compacts all files into a single one and moves the file to level 0.
Also add check for number of files at level 1+ when opening db with
universal compaction style.
Test Plan:
'make all check'. New unit test for internal convertion function. Also manully test various
cmd like:
./ldb change_compaction_style --old_compaction_style=0
--new_compaction_style=1 --db=/tmp/leveldbtest-3088/db_test
Reviewers: haobo, dhruba
Reviewed By: haobo
CC: vamsi, emayanke
Differential Revision: https://reviews.facebook.net/D12603
Summary:
If ReadOptions.non_blocking_io is set to true, then KeyMayExists
and Iterators will return data that is cached in RAM.
If the Iterator needs to do IO from storage to serve the data,
then the Iterator.status() will return Status::IsRetry().
Test Plan:
Enhanced unit test DBTest.KeyMayExist to detect if there were are IOs
issues from storage. Added DBTest.NonBlockingIteration to verify
nonblocking Iterations.
Reviewers: emayanke, haobo
Reviewed By: haobo
CC: leveldb
Maniphest Tasks: T63
Differential Revision: https://reviews.facebook.net/D12531
Summary: Replace include/leveldb with include/rocksdb.
Test Plan:
make clean; make check
make clean; make release
Differential Revision: https://reviews.facebook.net/D12489
Summary: An api to query the level, key ranges, size etc for each SST file and an api to delete a specific file from the db and all associated state in the bookkeeping datastructures.
Notes: Editing the manifest version does not release the obsolete files right away. However deleting the file directly will mess up the iterator. We may need a more aggressive/timely file deletion api.
I have used std::unique_ptr - will switch to boost:: since this is external. thoughts?
Unit test is fragile right now as it expects the compaction at certain levels.
Test Plan: unittest
Reviewers: dhruba, vamsi, emayanke
CC: zshao, leveldb, haobo
Task ID: #
Blame Rev:
Summary: Also expanded class LogFile to have startSequene and FileSize and exposed it publicly
Test Plan: make all check
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12087
Summary:
This diff adds support for both soft and hard rate limiting. The following changes are included:
1) Options.rate_limit is renamed to Options.hard_rate_limit.
2) Options.rate_limit_delay_milliseconds is renamed to Options.rate_limit_delay_max_milliseconds.
3) Options.soft_rate_limit is added.
4) If the maximum compaction score is > hard_rate_limit and rate_limit_delay_max_milliseconds == 0, then writes are delayed by 1 ms at a time until the max compaction score falls below hard_rate_limit.
5) If the max compaction score is > soft_rate_limit but <= hard_rate_limit, then writes are delayed by 0-1 ms depending on how close we are to hard_rate_limit.
6) Users can disable 4 by setting hard_rate_limit = 0. They can add a limit to the maximum amount of time waited by setting rate_limit_delay_max_milliseconds > 0. Thus, the old behavior can be preserved by setting soft_rate_limit = 0, which is the default.
Test Plan:
make -j32 check
./db_stress
Reviewers: dhruba, haobo, MarkCallaghan
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12003
Summary: Removed KeyMayExistImpl because KeyMayExist demanded Get like semantics now. Removed no_io from memtable and imm because we need the proper value now and shouldn't just stop when we see Merge in memtable. Added checks to block_cache. Updated documentation and unit-test
Test Plan: make all check;db_stress for 1 hour
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11853
Summary:
Currently, when a certain number of level0 files (level0_slowdown_writes_trigger) are present, RocksDB will slow down each write by 1ms. There is a second limit of level0 files at which RocksDB will stop writes altogether (level0_stop_writes_trigger).
This patch enables the user to supply a third parameter specifying the number of files at which Rocks will start slowing down writes (level0_start_slowdown_writes). When this number is reached, Rocks will slow down writes as a quadratic function of level0_slowdown_writes_trigger - num_level0_files.
For some workloads, this improves latency and throughput. I will post some stats momentarily in https://our.intern.facebook.com/intern/tasks/?t=2613384.
Test Plan:
make -j32 check
./db_stress
./db_bench
Reviewers: dhruba, haobo, MarkCallaghan, xjin
Reviewed By: xjin
CC: leveldb, xjin, zshao
Differential Revision: https://reviews.facebook.net/D11859
Summary: Previously, statistics are kept on how much time is spent on stalls of different types. This patch adds support for keeping number of stalls of each type. For example, instead of just reporting how many microseconds are spent waiting for memtables to be compacted, it will also report how many times a write stalled for that to occur.
Test Plan:
make -j32 check
./db_stress
# Not really sure what else should be done...
Reviewers: dhruba, MarkCallaghan, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11841
