Summary:
There are a number of fixes in this PR (with most bugs found via the added stress tests):
1. Re-enable reseek optimization. This was initially disabled to avoid infinite loops in https://github.com/facebook/rocksdb/pull/3955 but this can be resolved by remembering not to reseek after a reseek has already been done. This problem only affects forward iteration in `DBIter::FindNextUserEntryInternal`, as we already disable reseeking in `DBIter::FindValueForCurrentKeyUsingSeek`.
2. Verify that ReadOption.snapshot can be safely used for iterator creation. Some snapshots would not give correct results because snaphsot validation would not be enforced, breaking some assumptions in Prev() iteration.
3. In the non-snapshot Get() case, reads done at `LastPublishedSequence` may not be enough, because unprepared sequence numbers are not published. Use `std::max(published_seq, max_visible_seq)` to do lookups instead.
4. Add stress test to test reading own writes.
5. Minor bug in the allow_concurrent_memtable_write case where we forgot to pass in batch_per_txn_.
6. Minor performance optimization in `CalcMaxUnpreparedSequenceNumber` by assigning by reference instead of value.
7. Add some more comments everywhere.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5573
Differential Revision: D16276089
Pulled By: lth
fbshipit-source-id: 18029c944eb427a90a87dee76ac1b23f37ec1ccb
Summary:
There are concerns about the correctness of this patch. Disabling by default until the concerns are resolved.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5606
Differential Revision: D16428064
Pulled By: maysamyabandeh
fbshipit-source-id: a89280f0ea85796c9c9dfbfd9a8e91dad9b000b3
Summary:
Right now, users cannot take advantage of row cache, unless no snapshot is used, or Get() is repeated for the same snapshots. This limits the usage of row cache.
This change eliminate this restriction in some cases. If the snapshot used is newer than the largest sequence number in the file, and write callback function is not registered, the same row cache key is used as no snapshot is given. We still need the callback function restriction for now because the callback function may filter out different keys for different snapshots even if the snapshots are new.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5600
Test Plan: Add a unit test.
Differential Revision: D16386616
fbshipit-source-id: 6b7d214bd215d191b03ccf55926ad4b703ec2e53
Summary:
- Compute correlation between a few features and predictions, e.g., number of accesses since the last access vs number of accesses till the next access on a block.
- Output human readable trace file so python can consume it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5596
Test Plan: make clean && USE_CLANG=1 make check -j32
Differential Revision: D16373200
Pulled By: HaoyuHuang
fbshipit-source-id: c848d26bc2e9210461f317d7dbee42d55be5a0cc
Summary:
Atomic flush test started to fail after https://github.com/facebook/rocksdb/issues/5099. Then https://github.com/facebook/rocksdb/issues/5278 provided a fix after
which the same error occurred much less frequently. However it still occur
occasionally. Not sure what the root cause is. This PR disables the feature of
snapshot list refresh, and we should keep an eye on the failure in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5581
Differential Revision: D16295985
Pulled By: riversand963
fbshipit-source-id: c9e62e65133c52c21b07097de359632ca62571e4
Summary:
Added .watchmanconfig file to rocksdb repo. It is currently .gitignored.
This allows to auto sync modified files with watchman when editing them remotely.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5593
Differential Revision: D16363860
Pulled By: elipoz
fbshipit-source-id: 5ae221e21c6c757ceb08877771550d508f773d55
Summary:
Added log_readahead_size option to control prefetching for Log::Reader.
This is mostly useful for reading a remotely located log, as it can save the number of round-trips when reading it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5592
Differential Revision: D16362989
Pulled By: elipoz
fbshipit-source-id: c5d4d5245a44008cd59879640efff70c091ad3e8
Summary:
ldb idump now only works for default column family. Extend it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5594
Test Plan: Compile and run the tool against a multiple CF DB.
Differential Revision: D16380684
fbshipit-source-id: bfb8af36fdad1806837c90aaaab492d71528aceb
Summary:
Fixing a corner case crash when there was no data read from file, but status is still OK
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5586
Differential Revision: D16348117
Pulled By: elipoz
fbshipit-source-id: f97973308024f020d8be79ca3c56466b84d80656
Summary:
This PR traces the referenced key for Get for all types of blocks. This is useful when evaluating hybrid row-block caches.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5548
Test Plan: make clean && USE_CLANG=1 make check -j32
Differential Revision: D16157979
Pulled By: HaoyuHuang
fbshipit-source-id: f6327411c9deb74e35e22a35f66cdbae09ab9d87
Summary:
Refresh of the earlier change here - https://github.com/facebook/rocksdb/issues/5135
This is a review request for code change needed for - https://github.com/facebook/rocksdb/issues/3469
"Add support for taking snapshot of a column family and creating column family from a given CF snapshot"
We have an implementation for this that we have been testing internally. We have two new APIs that together provide this functionality.
(1) ExportColumnFamily() - This API is modelled after CreateCheckpoint() as below.
// Exports all live SST files of a specified Column Family onto export_dir,
// returning SST files information in metadata.
// - SST files will be created as hard links when the directory specified
// is in the same partition as the db directory, copied otherwise.
// - export_dir should not already exist and will be created by this API.
// - Always triggers a flush.
virtual Status ExportColumnFamily(ColumnFamilyHandle* handle,
const std::string& export_dir,
ExportImportFilesMetaData** metadata);
Internally, the API will DisableFileDeletions(), GetColumnFamilyMetaData(), Parse through
metadata, creating links/copies of all the sst files, EnableFileDeletions() and complete the call by
returning the list of file metadata.
(2) CreateColumnFamilyWithImport() - This API is modeled after IngestExternalFile(), but invoked only during a CF creation as below.
// CreateColumnFamilyWithImport() will create a new column family with
// column_family_name and import external SST files specified in metadata into
// this column family.
// (1) External SST files can be created using SstFileWriter.
// (2) External SST files can be exported from a particular column family in
// an existing DB.
// Option in import_options specifies whether the external files are copied or
// moved (default is copy). When option specifies copy, managing files at
// external_file_path is caller's responsibility. When option specifies a
// move, the call ensures that the specified files at external_file_path are
// deleted on successful return and files are not modified on any error
// return.
// On error return, column family handle returned will be nullptr.
// ColumnFamily will be present on successful return and will not be present
// on error return. ColumnFamily may be present on any crash during this call.
virtual Status CreateColumnFamilyWithImport(
const ColumnFamilyOptions& options, const std::string& column_family_name,
const ImportColumnFamilyOptions& import_options,
const ExportImportFilesMetaData& metadata,
ColumnFamilyHandle** handle);
Internally, this API creates a new CF, parses all the sst files and adds it to the specified column family, at the same level and with same sequence number as in the metadata. Also performs safety checks with respect to overlaps between the sst files being imported.
If incoming sequence number is higher than current local sequence number, local sequence
number is updated to reflect this.
Note, as the sst files is are being moved across Column Families, Column Family name in sst file
will no longer match the actual column family on destination DB. The API does not modify Column
Family name or id in the sst files being imported.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5495
Differential Revision: D16018881
fbshipit-source-id: 9ae2251025d5916d35a9fc4ea4d6707f6be16ff9
Summary:
Crc32c Parallel computation optimization:
Algorithm comes from Intel whitepaper: [crc-iscsi-polynomial-crc32-instruction-paper](https://www.intel.com/content/dam/www/public/us/en/documents/white-papers/crc-iscsi-polynomial-crc32-instruction-paper.pdf)
Input data is divided into three equal-sized blocks
Three parallel blocks (crc0, crc1, crc2) for 1024 Bytes
One Block: 42(BLK_LENGTH) * 8(step length: crc32c_u64) bytes
1. crc32c_test:
```
[==========] Running 4 tests from 1 test case.
[----------] Global test environment set-up.
[----------] 4 tests from CRC
[ RUN ] CRC.StandardResults
[ OK ] CRC.StandardResults (1 ms)
[ RUN ] CRC.Values
[ OK ] CRC.Values (0 ms)
[ RUN ] CRC.Extend
[ OK ] CRC.Extend (0 ms)
[ RUN ] CRC.Mask
[ OK ] CRC.Mask (0 ms)
[----------] 4 tests from CRC (1 ms total)
[----------] Global test environment tear-down
[==========] 4 tests from 1 test case ran. (1 ms total)
[ PASSED ] 4 tests.
```
2. RocksDB benchmark: db_bench --benchmarks="crc32c"
```
Linear Arm crc32c:
crc32c: 1.005 micros/op 995133 ops/sec; 3887.2 MB/s (4096 per op)
```
```
Parallel optimization with Armv8 crypto extension:
crc32c: 0.419 micros/op 2385078 ops/sec; 9316.7 MB/s (4096 per op)
```
It gets ~2.4x speedup compared to linear Arm crc32c instructions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5494
Differential Revision: D16340806
fbshipit-source-id: 95dae9a5b646fd20a8303671d82f17b2e162e945
Summary:
The 'refs' field in LRUHandle now counts only external references, since anyway we already have the IN_CACHE flag. This simplifies reference accounting logic a bit. Also cleaned up few asserts code as well as the comments - to be more readable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5579
Differential Revision: D16286747
Pulled By: elipoz
fbshipit-source-id: 7186d88f80f512ce584d0a303437494b5cbefd7f
Summary:
Added support for sequential read-ahead file that can prefetch the read data and later serve it from internal cache buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5580
Differential Revision: D16287082
Pulled By: elipoz
fbshipit-source-id: a3e7ad9643d377d39352ff63058ce050ec31dcf3
Summary:
RandomAccessFileReader.for_compaction_ doesn't seem to be used anymore. Remove it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5572
Test Plan: USE_CLANG=1 make all check -j
Differential Revision: D16286178
fbshipit-source-id: aa338049761033dfbe5e8b1707bbb0be2df5be7e
Summary:
Currently, we are tracking keys we need to rollback via a separate structure specific to WriteUnprepared in write_set_keys_.
We already have a data structure called tracked_keys_ used to track which keys to unlock on transaction termination. This is exactly what we want, since we should only rollback keys that we have locked anyway.
Save some memory by reusing that data structure instead of making our own.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5562
Differential Revision: D16206484
Pulled By: lth
fbshipit-source-id: 5894d2b824a4b19062d84adbd6e6e86f00047488
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
Summary:
`wal_batch.writeBatchPtr.release()` gives up the ownership of the original `WriteBatch`, but there is no new owner, which causes memory leak.
The patch is simple. Removing `release()` prevent ownership change. `std::move` is for speed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5515
Differential Revision: D16264281
Pulled By: riversand963
fbshipit-source-id: 51c556b7a1c977325c3aa24acb636303847151fa
Summary:
When 'HAVE_ARM64_CRC' is set, the blew methods:
- bool rocksdb::crc32c::isSSE42()
- bool rocksdb::crc32c::isPCLMULQDQ()
are defined but not used, the unused-function is raised
when do rocksdb build.
This patch try to cleanup these warnings by add ifndef,
if it build under the HAVE_ARM64_CRC, we will not define
`isSSE42` and `isPCLMULQDQ`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5565
Differential Revision: D16233654
fbshipit-source-id: c32a9dda7465dbf65f9ccafef159124db92cdffd
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/5563
Test Plan: Manually run the script on files generated by block_cache_trace_analyzer.
Differential Revision: D16214400
Pulled By: HaoyuHuang
fbshipit-source-id: 94485eed995e9b2b63e197c5dfeb80129fa7897f
Summary:
- Provide assignment operator in CompactionStats
- Provide a copy constructor for FileDescriptor
- Remove std::move from "return std::move(t)" in BoundedQueue
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5553
Differential Revision: D16230170
fbshipit-source-id: fd7c6e52390b2db1be24141e25649cf62424d078
Summary:
This PR adds a ghost cache for admission control. Specifically, it admits an entry on its second access.
It also adds a hybrid row-block cache that caches the referenced key-value pairs of a Get/MultiGet request instead of its blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5534
Test Plan: make clean && COMPILE_WITH_ASAN=1 make check -j32
Differential Revision: D16101124
Pulled By: HaoyuHuang
fbshipit-source-id: b99edda6418a888e94eb40f71ece45d375e234b1
Summary:
Add an extra cleanup step so that db directory can be saved and uploaded.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5554
Reviewed By: yancouto
Differential Revision: D16168844
Pulled By: riversand963
fbshipit-source-id: ec7b2cee5f11c7d388c36531f8b076d648e2fb19
Summary:
Current PosixLogger performs IO operations using posix calls. Thus the
current implementation will not work for non-posix env. Created a new
logger class EnvLogger that uses env specific WritableFileWriter for IO operations.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5491
Test Plan: make check
Differential Revision: D15909002
Pulled By: ggaurav28
fbshipit-source-id: 13a8105176e8e42db0c59798d48cb6a0dbccc965
Summary:
When atomic flush stress test fails, we print internal keys within the range with mismatched key/values for all column families.
Test plan (on devserver)
Manually hack the code to randomly insert wrong data. Run the test.
```
$make clean && COMPILE_WITH_TSAN=1 make -j32 db_stress
$./db_stress -test_atomic_flush=true -ops_per_thread=10000
```
Check that proper error messages are printed, as follows:
```
2019/07/08-17:40:14 Starting verification
Verification failed
Latest Sequence Number: 190903
[default] 000000000000050B => 56290000525350515E5F5C5D5A5B5859
[3] 0000000000000533 => EE100000EAEBE8E9E6E7E4E5E2E3E0E1FEFFFCFDFAFBF8F9
Internal keys in CF 'default', [000000000000050B, 0000000000000533] (max 8)
key 000000000000050B seq 139920 type 1
key 0000000000000533 seq 0 type 1
Internal keys in CF '3', [000000000000050B, 0000000000000533] (max 8)
key 0000000000000533 seq 0 type 1
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5549
Differential Revision: D16158709
Pulled By: riversand963
fbshipit-source-id: f07fa87763f87b3bd908da03c956709c6456bcab
Summary:
Right now ldb can open running DB through read-only DB. However, it might leave info logs files to the read-only DB directory. Add an option to open the DB as secondary to avoid it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5537
Test Plan:
Run
./ldb scan --max_keys=10 --db=/tmp/rocksdbtest-2491/dbbench --secondary_path=/tmp --no_value --hex
and
./ldb get 0x00000000000000103030303030303030 --hex --db=/tmp/rocksdbtest-2491/dbbench --secondary_path=/tmp
against a normal db_bench run and observe the output changes. Also observe that no new info logs files are created under /tmp/rocksdbtest-2491/dbbench.
Run without --secondary_path and observe that new info logs created under /tmp/rocksdbtest-2491/dbbench.
Differential Revision: D16113886
fbshipit-source-id: 4e09dec47c2528f6ca08a9e7a7894ba2d9daebbb
Summary:
https://github.com/facebook/rocksdb/pull/5520 caused a buffer overflow bug in DBWALTest.kTolerateCorruptedTailRecords. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5550
Test Plan: Run the test in UBSAN. It used to fail. Not it succeeds.
Differential Revision: D16165516
fbshipit-source-id: 42c56a6bc64eb091f054b87757fcbef60da825f7
Summary:
Print out some more information when db_tress fails with verification failures to help debugging problems.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5543
Test Plan:
Manually ingest some failures and observe the outputs are like this:
Verification failed
[default] 0000000000199A5A => 7C3D000078797A7B74757677707172736C6D6E6F68696A6B
[6] 000000000019C8BD => 65380000616063626D6C6F6E69686B6A
internal keys in default CF [0000000000199A5A, 000000000019C8BD] (max 8)
key 0000000000199A5A seq 179246 type 1
key 000000000019C8BD seq 163970 type 1
Lastest Sequence Number: 292234
Differential Revision: D16153717
fbshipit-source-id: b33fa50a828c190cbf8249a37955432044f92daf
Summary:
Previously `GetAllKeyVersions()` supports default column family only. This PR add support for other column families.
Test plan (devserver):
```
$make clean && COMPILE_WITH_ASAN=1 make -j32 db_basic_test
$./db_basic_test --gtest_filter=DBBasicTest.GetAllKeyVersions
```
All other unit tests must pass.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5544
Differential Revision: D16147551
Pulled By: riversand963
fbshipit-source-id: 5a61aece2a32d789e150226a9b8d53f4a5760168
Summary:
1. Cleanup WAL trash files on open
2. Don't apply deletion rate limit if WAL dir is different from db dir
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5520
Test Plan: Add new unit tests and make check
Differential Revision: D16096750
Pulled By: anand1976
fbshipit-source-id: 6f07858ad864b754b711db416f0389c45ede599b
Summary:
clang analyze fails after https://github.com/facebook/rocksdb/pull/5514 for this failure:
table/block_based/block_based_table_reader.cc:3450:16: warning: Called C++ object pointer is null
if (!get_context->SaveValue(
^~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
The reaon is that a branching is added earlier in the function on get_context is null or not, CLANG analyze thinks that it can be null and we make the function call withou the null checking.
Fix the issue by removing the branch and add an assert.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5542
Test Plan: "make all check" passes and CLANG analyze failure goes away.
Differential Revision: D16133988
fbshipit-source-id: d4627d03c4746254cc11926c523931086ccebcda
Summary:
Since https://github.com/facebook/rocksdb/issues/5468 `LevelIterator` compare lower bound and file smallest key on `NewFileIterator` and cache the result to reduce per key lower bound check. However when iterate across file boundary, it doesn't update the cached result since `Valid()=false` because `Valid()` still reflect the status of the previous file iterator. Fixing it by remove the `Valid()` check from `CheckMayBeOutOfLowerBound()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5540
Test Plan:
See the new test.
Signed-off-by: Yi Wu <yiwu@pingcap.com>
Differential Revision: D16127653
fbshipit-source-id: a0691e1164658d485c17971aaa97028812f74678
Summary:
Sometimes it is helpful to fetch the whole history of stats after benchmark runs. Add such an option
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5532
Test Plan: Run the benchmark manually and observe the output is as expected.
Differential Revision: D16097764
fbshipit-source-id: 10b5b735a22a18be198b8f348be11f11f8806904
Summary:
This PR associates a unique id with Get and MultiGet. This enables us to track how many blocks a Get/MultiGet request accesses. We can also measure the impact of row cache vs block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5514
Test Plan: make clean && COMPILE_WITH_ASAN=1 make check -j32
Differential Revision: D16032681
Pulled By: HaoyuHuang
fbshipit-source-id: 775b05f4440badd58de6667e3ec9f4fc87a0af4c
Summary:
Previously, if the jemalloc was built with nonempty string for
`--with-jemalloc-prefix`, then `HasJemalloc()` would return false on
Linux, so jemalloc would not be used at runtime. On Mac, it would cause
a linker failure due to no definitions found for the weak functions
declared in "port/jemalloc_helper.h". This should be a rare problem
because (1) on Linux the default `--with-jemalloc-prefix` value is the
empty string, and (2) Homebrew's build explicitly sets
`--with-jemalloc-prefix` to the empty string.
However, there are cases where `--with-jemalloc-prefix` is nonempty.
For example, when building jemalloc from source on Mac, the default
setting is `--with-jemalloc-prefix=je_`. Such jemalloc builds should be
usable by RocksDB.
The fix is simple. Defining `JEMALLOC_MANGLE` before including
"jemalloc.h" causes it to define unprefixed symbols that are aliases for
each of the prefixed symbols. Thanks to benesch for figuring this out
and explaining it to me.
Fixes https://github.com/facebook/rocksdb/issues/1462.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5521
Test Plan:
build jemalloc with prefixed symbols:
```
$ ./configure --with-jemalloc-prefix=lol
$ make
```
compile rocksdb against it:
```
$ WITH_JEMALLOC_FLAG=1 JEMALLOC=1 EXTRA_LDFLAGS="-L/home/andrew/jemalloc/lib/" EXTRA_CXXFLAGS="-I/home/andrew/jemalloc/include/" make -j12 ./db_bench
```
run db_bench and verify jemalloc actually used:
```
$ ./db_bench -benchmarks=fillrandom -statistics=true -dump_malloc_stats=true -stats_dump_period_sec=1
$ grep jemalloc /tmp/rocksdbtest-1000/dbbench/LOG
2019/06/29-12:20:52.088658 7fc5fb7f6700 [_impl/db_impl.cc:837] ___ Begin jemalloc statistics ___
...
```
Differential Revision: D16092758
fbshipit-source-id: c2c358346190ed62ceb2a3547a6c4c180b12f7c4
Summary:
Recent commit 3886dddc3b introduced a new test which is not compatible with lite mode and breaks contrun test:
```
[ RUN ] StatsHistoryTest.ForceManualFlushStatsCF
monitoring/stats_history_test.cc:642: Failure
Expected: (cfd_stats->GetLogNumber()) < (cfd_test->GetLogNumber()), actual: 15 vs 15
```
This PR excludes the test from lite mode to appease the failing test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5529
Differential Revision: D16080892
Pulled By: miasantreble
fbshipit-source-id: 2f8a22758f71250cd9f204046404226ddc13b028
