Summary:
This is a follow up to #4370. The earlier comment is not correct.
Thanks to ajkr for pointing this out.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4380
Differential Revision: D9874667
Pulled By: sagar0
fbshipit-source-id: f4e092d86b29c715258210b770643d367e38caae
Summary:
Including tools/trace_analyzer_tool.cc in rocksdb_lib was causing conflicts in dependent binaries due to duplicate gflag (other_prefix).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4371
Differential Revision: D9846953
Pulled By: anand1976
fbshipit-source-id: 80b4aa36ab8428b8f6dceb896c45532684102709
Summary:
This commit implements automatic recovery from a Status::NoSpace() error
during background operations such as write callback, flush and
compaction. The broad design is as follows -
1. Compaction errors are treated as soft errors and don't put the
database in read-only mode. A compaction is delayed until enough free
disk space is available to accomodate the compaction outputs, which is
estimated based on the input size. This means that users can continue to
write, and we rely on the WriteController to delay or stop writes if the
compaction debt becomes too high due to persistent low disk space
condition
2. Errors during write callback and flush are treated as hard errors,
i.e the database is put in read-only mode and goes back to read-write
only fater certain recovery actions are taken.
3. Both types of recovery rely on the SstFileManagerImpl to poll for
sufficient disk space. We assume that there is a 1-1 mapping between an
SFM and the underlying OS storage container. For cases where multiple
DBs are hosted on a single storage container, the user is expected to
allocate a single SFM instance and use the same one for all the DBs. If
no SFM is specified by the user, DBImpl::Open() will allocate one, but
this will be one per DB and each DB will recover independently. The
recovery implemented by SFM is as follows -
a) On the first occurance of an out of space error during compaction,
subsequent
compactions will be delayed until the disk free space check indicates
enough available space. The required space is computed as the sum of
input sizes.
b) The free space check requirement will be removed once the amount of
free space is greater than the size reserved by in progress
compactions when the first error occured
c) If the out of space error is a hard error, a background thread in
SFM will poll for sufficient headroom before triggering the recovery
of the database and putting it in write-only mode. The headroom is
calculated as the sum of the write_buffer_size of all the DB instances
associated with the SFM
4. EventListener callbacks will be called at the start and completion of
automatic recovery. Users can disable the auto recov ery in the start
callback, and later initiate it manually by calling DB::Resume()
Todo:
1. More extensive testing
2. Add disk full condition to db_stress (follow-on PR)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4164
Differential Revision: D9846378
Pulled By: anand1976
fbshipit-source-id: 80ea875dbd7f00205e19c82215ff6e37da10da4a
Summary:
Because `base_files` and `added_files` both are sorted, using a merge
operation to these two sorted arrays is more effective. The complexity
is reduced to linear time.
- optmize the merge complexity.
- move the `NDEBUG` of sorted `added_files` out of merge process.
Signed-off-by: JiYou <jiyou09@gmail.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4366
Differential Revision: D9833592
Pulled By: ajkr
fbshipit-source-id: dd32b67ebdca4c20e5e9546ab8082cecefe99fd0
Summary:
The code is dead in RocksDB as `log::Reader::initial_offset_` is always zero. We should delete it so we don't have to maintain it like in #4359.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4362
Differential Revision: D9817829
Pulled By: ajkr
fbshipit-source-id: 474a2c679e5bd273b40608f3a5332931d9eefe6d
Summary:
Please consider this small PR providing access to the `MemoryUsage::GetApproximateMemoryUsageByType` function in plain C API. Actually I'm working on Go application and now trying to investigate the reasons of high memory consumption (#4313). Go [wrappers](https://github.com/tecbot/gorocksdb) are built on the top of Rocksdb C API. According to the #706, `MemoryUsage::GetApproximateMemoryUsageByType` is considered as the best option to get database internal memory usage stats, but it wasn't supported in C API yet.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4340
Differential Revision: D9655135
Pulled By: ajkr
fbshipit-source-id: a3d2f3f47c143ae75862fbcca2f571ea1b49e14a
Summary:
With #3983 the size of IndexBlockIter was increased. This had resulted in a regression on P50 latencies in one of our benchmarks. The patch reduces IndexBlockIter size be eliminating active_comparator_ field from the class.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4358
Differential Revision: D9781737
Pulled By: maysamyabandeh
fbshipit-source-id: 71e2b28d90ff0813db9e04b737ae73e185583c52
Summary:
Before the fix:
On a PowerPC machine, run the following
```
$ make jtest
```
The command will fail due to "undefined symbol: crc32c_ppc". It was caused by
'rocksdbjava' Makefile target not including crc32c_ppc object files when
generating the shared lib. The fix is simple.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4357
Differential Revision: D9779474
Pulled By: riversand963
fbshipit-source-id: 3c5ec9068c2b9c796e6500f71cd900267064fd51
Summary:
`RangeDelAggregator::AddTombstones` contained an assertion which stated that, if a range tombstone extended past the largest key in the sstable, then `FileMetaData::largest` must have a sentinel sequence number of `kMaxSequenceNumber`, which implies that the tombstone's end key is safe to truncate. However, `largest` will not be a sentinel key when the next sstable in the level's smallest key is equal to the current sstable's largest key, which caused the assertion to fail.
The assertion must hold for the truncation to be safe, so it has been moved to an additional check on end-key truncation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4356
Differential Revision: D9760891
Pulled By: abhimadan
fbshipit-source-id: 7c20c3885cd919dcd14f291f88fd27aa33defebc
Summary:
TransactionOptions::skip_concurrency_control allows pessimistic transactions to skip the overhead of concurrency control. This could be as an optimization if the application knows that the transaction would not have any conflict with concurrent transactions. It is currently used during recovery assuming (i) application guarantees no conflict between prepared transactions in the WAL (ii) application guarantees that recovered transactions will be rolled back/commit before new transactions start.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4346
Differential Revision: D9759149
Pulled By: maysamyabandeh
fbshipit-source-id: f896e84fa58b0b584be904c7fd3883a41ea3215b
Summary:
In C++ 11, the order of argument and move evaluation in a statement such
as below is unspecified -
foo(a.b).bar(std::move(a))
The compiler is free to evaluate std::move(a) first, and then a.b is unspecified.
In C++ 17, this will be safe if a draft proposal around function
chaining rules is accepted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4348
Differential Revision: D9688810
Pulled By: anand1976
fbshipit-source-id: e4651d0ca03dcf007e50371a0fc72c0d1e710fb4
Summary:
Reverting is needed to unblock a user building against master, who is blocked for multiple days due to a thread-safety issue in `GetEmptyDict`. We haven't been able to fix it quickly, so reverting.
Simply ran `git revert 6c40806e51a89386d2b066fddf73d3fd03a36f65`. There were no merge conflicts.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4347
Differential Revision: D9668365
Pulled By: ajkr
fbshipit-source-id: 0c56334f0a23cf5ee0233d4e4679eae6709739cd
Summary:
As you know, almost all compilers support "pragma once" keyword instead of using include guards. To be keep consistency between header files, all header files are edited.
Besides this, try to fix some warnings about loss of data.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4339
Differential Revision: D9654990
Pulled By: ajkr
fbshipit-source-id: c2cf3d2d03a599847684bed81378c401920ca848
Summary:
This is a followup to #4311. Checking `!RangeDelAggregator::IsEmpty()` before opening a dedicated range tombstone SST did not properly prevent empty SSTs from being generated. That's because it relies on `CollapsedRangeDelMap::Size`, which had an underflow bug when the map was empty. This PR fixes that underflow bug.
Also fixed an uninitialized variable in db_stress.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4336
Differential Revision: D9600080
Pulled By: ajkr
fbshipit-source-id: bc6980ca79d2cd01b825ebc9dbccd51c1a70cfc7
Summary:
`GetLiveFiles` and `GetLiveFilesMetadata` should return path relative to db path.
It is a separate issue when `path_relative` is false how can we return relative path. But `DBImpl::GetLiveFiles` don't handle it as well when there are multiple `db_paths`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4326
Differential Revision: D9545904
Pulled By: yiwu-arbug
fbshipit-source-id: 6762d879fcb561df2b612e6fdfb4a6b51db03f5d
Summary:
Currently unity-test is failing because both trace_replay.cc and trace_analyzer_tool.cc defined `DecodeCFAndKey` under anonymous namespace. It is supposed to be fine except unity test will dump all source files together and now we have a conflict.
Another issue with trace_analyzer_tool.cc is that it is using some utility functions from ldb_cmd which is not included in Makefile for unity_test, I chose to update TESTHARNESS to include LIBOBJECTS. Feel free to comment if there is a less intrusive way to solve this.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4323
Differential Revision: D9599170
Pulled By: miasantreble
fbshipit-source-id: 38765b11f8e7de92b43c63bdcf43ea914abdc029
Summary:
trace_analyzer_tool should only be in ANALYZER_LIB_SOURCES and not in LIB_SOURCES.
This fixes java_test travis build failures seen in jtest.
Blame: a6d3de4e7a
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4331
Differential Revision: D9560377
Pulled By: sagar0
fbshipit-source-id: 6b9636201a920b56ee0f61e367fee5d3dca692b0
Summary:
In our application we spawn helper child processes concurrently with
opening rocksdb. In one situation I observed that the child process had inherited
the rocksdb lock file as well as directory handles to the rocksdb storage location.
The code in env_posix takes care to set CLOEXEC but doesn't use `O_CLOEXEC` at the
time that the files are opened which means that there is a window of opportunity
to leak the descriptors across a fork/exec boundary.
This diff introduces a helper that can conditionally set the `O_CLOEXEC` bit for
the open call using the same logic as that in the existing helper for setting
that flag post-open.
I've preserved the post-open logic for systems that don't have `O_CLOEXEC`.
I've introduced setting `O_CLOEXEC` for what appears to be a number of temporary
or transient files and directory handles; I suspect that none of the files
opened by Rocks are intended to be inherited by a forked child process.
In one case, `fopen` is used to open a file. I've added the use of the glibc-specific `e`
mode to turn on `O_CLOEXEC` for this case. While this doesn't cover all posix systems,
it is an improvement for our common deployment system.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4328
Reviewed By: ajkr
Differential Revision: D9553046
Pulled By: wez
fbshipit-source-id: acdb89f7a85ca649b22fe3c3bd76f82142bec2bf
Summary:
Basically at the moment it seems it's possible to cause write stall by calling flush (either manually vis DB::Flush(), or from Backup Engine directly calling FlushMemTable() while background flush may be already happening.
One of the ways to fix it is that in DBImpl::CompactRange() we already check for possible stall and delay flush if needed before we actually proceed to call FlushMemTable(). We can simply move this delay logic to separate method and call it from FlushMemTable.
This is draft patch, for first look; need to check tests/update SyncPoints and most certainly would need to add allow_write_stall method to FlushOptions().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4297
Differential Revision: D9420705
Pulled By: mikhail-antonov
fbshipit-source-id: f81d206b55e1d7b39e4dc64242fdfbceeea03fcc
Summary: There were a few files that were missed when AutoHeaders were moved to their own file. Add explicit loads
Reviewed By: yfeldblum
Differential Revision: D9499942
fbshipit-source-id: 942bf3a683b8961e1b6244136f6337477dcc45af
Summary: For the CURRENT file forged during checkpoint, we were forgetting to `fsync` or `fdatasync` it after its creation. This PR fixes it.
Differential Revision: D9525939
Pulled By: ajkr
fbshipit-source-id: a505483644026ee3f501cfc0dcbe74832165b2e3
Summary:
When reading an expired key using `Get(..., std::string* value)` API, BlobDB first read the index entry and decode expiration from it. In this case, although BlobDB reset the PinnableSlice, the index entry is stored in user provided string `value`. The value will be returned as a garbage value, despite status being NotFound. Fixing it by use a different PinnableSlice to read the index entry.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4321
Differential Revision: D9519042
Pulled By: yiwu-arbug
fbshipit-source-id: f054c951a1fa98265228be94f931904ed7056677
Summary:
Projects built in debug profile don't always link to debug runtime.
Allowing opting out the debug runtime to make rocksdb get along well
with other projects.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4317
Differential Revision: D9518038
Pulled By: sagar0
fbshipit-source-id: 384901a0d12b8de20759756e8a19b4888a27c399
Summary:
`DB::DiableFileDeletions` and `DB::EnableFileDeletions` are used for applications to stop RocksDB background jobs to delete files while they are doing replication. Implement these methods for BlobDB. `DeleteObsolteFiles` now needs to check `disable_file_deletions_` before starting, and will hold `delete_file_mutex_` the whole time while it is running. `DisableFileDeletions` needs to wait on `delete_file_mutex_` for running `DeleteObsolteFiles` job and set `disable_file_deletions_` flag.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4314
Differential Revision: D9501373
Pulled By: yiwu-arbug
fbshipit-source-id: 81064c1228f1724eff46da22b50ff765b16292cd
Summary:
Since bzip.org is no longer maintained, download the bzip2 packages from a snapshot taken by the internet archive until we figure out a more credible source.
Fixes issue: #4305
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4306
Differential Revision: D9514868
Pulled By: sagar0
fbshipit-source-id: 57c6a141a62e652f94377efc7ca9916b458e68d5
Summary:
According to 4848bd0c4e/db/log_reader.cc (L355), the original text is misleading when describing the layout of RecyclableLogHeader.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4315
Differential Revision: D9505284
Pulled By: riversand963
fbshipit-source-id: 79994c37a69e7003f03453e7efc0186feeafa609
Summary:
This PR fixes issue 3842. We drop deletion markers iff
1. We are the bottom most level AND
2. All other occurrences of the key are in the same snapshot range as the delete
I've also enhanced db_stress_test to add an option that does a full compare of the keys. This is done by a single thread (thread # 0). For tests I've run (so far)
make check -j64
db_stress
db_stress --acquire_snapshot_one_in=1000 --ops_per_thread=100000 /* to verify that new code doesnt break existing tests */
./db_stress --compare_full_db_state_snapshot=true --acquire_snapshot_one_in=1000 --ops_per_thread=100000 /* to verify new test code */
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4289
Differential Revision: D9491165
Pulled By: shrikanthshankar
fbshipit-source-id: ce144834f31736c189aaca81bed356ba990331e2
Summary:
RocksDB currently queues individual column family for flushing. This is not sufficient to support the needs of some applications that want to enforce order/dependency between column families, given that multiple foreground and background activities can trigger flushing in RocksDB.
This PR aims to address this limitation. Each flush request is described as a `FlushRequest` that can contain multiple column families. A background flushing thread pops one flush request from the queue at a time and processes it.
This PR does not enable atomic_flush yet, but is a subset of [PR 3752](https://github.com/facebook/rocksdb/pull/3752).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3952
Differential Revision: D8529933
Pulled By: riversand963
fbshipit-source-id: 78908a21e389a3a3f7de2a79bae0cd13af5f3539
Summary:
I have a PR to start calling `OnTableFileCreated` for empty SSTs: #4307. However, it is a behavior change so should not go into a patch release.
This PR adds back a check to make sure range deletions at least exist before starting file creation. This PR should be safe to backport to earlier versions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4311
Differential Revision: D9493734
Pulled By: ajkr
fbshipit-source-id: f0d43cda4cfd904f133cfe3a6eb622f52a9ccbe8
Summary:
In RocksDB, for a given SST file, all data blocks are compressed with the same dictionary. When we compress a block using the dictionary's raw bytes, the compression library first has to digest the dictionary to get it into a usable form. This digestion work is redundant and ideally should be done once per file.
ZSTD offers APIs for the caller to create and reuse a digested dictionary object (`ZSTD_CDict`). In this PR, we call `ZSTD_createCDict` once per file to digest the raw bytes. Then we use `ZSTD_compress_usingCDict` to compress each data block using the pre-digested dictionary. Once the file's created `ZSTD_freeCDict` releases the resources held by the digested dictionary.
There are a couple other changes included in this PR:
- Changed the parameter object for (un)compression functions from `CompressionContext`/`UncompressionContext` to `CompressionInfo`/`UncompressionInfo`. This avoids the previous pattern, where `CompressionContext`/`UncompressionContext` had to be mutated before calling a (un)compression function depending on whether dictionary should be used. I felt that mutation was error-prone so eliminated it.
- Added support for digested uncompression dictionaries (`ZSTD_DDict`) as well. However, this PR does not support reusing them across uncompression calls for the same file. That work is deferred to a later PR when we will store the `ZSTD_DDict` objects in block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4251
Differential Revision: D9257078
Pulled By: ajkr
fbshipit-source-id: 21b8cb6bbdd48e459f1c62343780ab66c0a64438
Summary:
The API comment on `OnTableFileCreationStarted` (b6280d01f9/include/rocksdb/listener.h (L331-L333)) led users to believe a call to `OnTableFileCreationStarted` will always be matched with a call to `OnTableFileCreated`. However, we were skipping the `OnTableFileCreated` call in one case: no error happens but also no file is generated since there's no data.
This PR adds the call to `OnTableFileCreated` for that case. The filename will be "(nil)" and the size will be zero.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4307
Differential Revision: D9485201
Pulled By: ajkr
fbshipit-source-id: 2f077ec7913f128487aae2624c69a50762394df6
Summary:
Add the unit test of Iterator (Seek and SeekForPrev) to trace_analyzer_test. The output files after analyzing the trace file are checked to make sure that analyzing results are correct.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4282
Differential Revision: D9436758
Pulled By: zhichao-cao
fbshipit-source-id: 88d471c9a69e07382d9c6a45eba72773b171e7c2
Summary:
Memtables are selected for flushing by the flush job. Currently we
have listener which is invoked when memtables for a column family are
flushed. That listener does not indicate which memtable was flushed in
the notification. If clients want to know if particular data in the
memtable was retired, there is no straight forward way to know this.
This method will help users who implement memtablerep factory and extend
interface for memtablerep, to know if the data in the memtable was
retired.
Another option that was tried, was to depend on memtable destructor to
be called after flush to mark that data was persisted. This works all
the time but sometimes there can huge delays between actual flush
happening and memtable getting destroyed. Hence, if anyone who is
waiting for data to persist will have to wait that longer.
It is expected that anyone who is implementing this method to have
return quickly as it blocks RocksDB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4304
Reviewed By: riversand963
Differential Revision: D9472312
Pulled By: gdrane
fbshipit-source-id: 8e693308dee749586af3a4c5d4fcf1fa5276ea4d
Summary:
When returning `kNoEntry` from HashIndex lookup, previously we invalidate the
`biter` by set `current_=restarts_`, so that the search can continue to the next
block in case the search result may reside in the next block.
There is one problem: when we are searching for a missing key, if the search
finds a `kNoEntry` and continue the search to the next block, there is also a
non-trivial possibility that the HashIndex return `kNoEntry` too, and the
expensive index iterator `Next()` will happen several times for nothing.
The solution is that if the hash table returns `kNoEntry`, `SeekForGetImpl()` just search the last restart interval for the key. It will stop at the first key that is large than the seek_key, or to the end of the block, and each case will be handled correctly.
Microbenchmark script:
```
TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=fillseq,readtocache,readmissing \
--cache_size=20000000000 --use_data_block_hash_index={true|false}
```
`readmissing` performance (lower is better):
```
binary: 3.6098 micros/op
hash (before applying diff): 4.1048 micros/op
hash (after applying diff): 3.3502 micros/op
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4296
Differential Revision: D9419159
Pulled By: fgwu
fbshipit-source-id: 21e3eedcccbc47a249aa8eb4bf405c9def0b8a05
Summary:
We want to sample the file I/O issued by RocksDB and report the function calls. This requires us to include the file paths otherwise it's hard to tell what has been going on.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4039
Differential Revision: D8670178
Pulled By: riversand963
fbshipit-source-id: 97ee806d1c583a2983e28e213ee764dc6ac28f7a
