Summary:
Some recent PRs added new source files or modified TARGETS file manually.
During next internal release, executing the following command will revert the
manual changes.
Update buckifier so that the following command
```
python buckfier/buckify_rocksdb.py
```
does not change TARGETS file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6726
Test Plan:
```
python buckifier/buckify_rocksdb.py
```
Reviewed By: siying
Differential Revision: D21098930
Pulled By: riversand963
fbshipit-source-id: e884f507fefef88163363c9097a460c98f1ed850
Summary:
In https://github.com/facebook/rocksdb/pull/6455, we modified the interface of `RandomAccessFileReader::Read` to be able to get rid of memcpy in direct IO mode.
This PR applies the new interface to `BlockFetcher` when reading blocks from SST files in direct IO mode.
Without this PR, in direct IO mode, when fetching and uncompressing compressed blocks, `BlockFetcher` will first copy the raw compressed block into `BlockFetcher::compressed_buf_` or `BlockFetcher::stack_buf_` inside `RandomAccessFileReader::Read` depending on the block size. then during uncompressing, it will copy the uncompressed block into `BlockFetcher::heap_buf_`.
In this PR, we get rid of the first memcpy and directly uncompress the block from `direct_io_buf_` to `heap_buf_`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6689
Test Plan: A new unit test `block_fetcher_test` is added.
Reviewed By: anand1976
Differential Revision: D21006729
Pulled By: cheng-chang
fbshipit-source-id: 2370b92c24075692423b81277415feb2aed5d980
Summary:
This PR implements a fault injection mechanism for injecting errors in reads in db_stress. The FaultInjectionTestFS is used for this purpose. A thread local structure is used to track the errors, so that each db_stress thread can independently enable/disable error injection and verify observed errors against expected errors. This is initially enabled only for Get and MultiGet, but can be extended to iterator as well once its proven stable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6538
Test Plan:
crash_test
make check
Reviewed By: riversand963
Differential Revision: D20714347
Pulled By: anand1976
fbshipit-source-id: d7598321d4a2d72bda0ced57411a337a91d87dc7
Summary:
Towards making compaction logic compatible with user timestamp.
When computing boundaries and overlapping ranges for inputs of compaction, We need to compare SSTs by user key without timestamp.
Test plan (devserver):
```
make check
```
Several individual tests:
```
./version_set_test --gtest_filter=VersionStorageInfoTimestampTest.GetOverlappingInputs
./db_with_timestamp_compaction_test
./db_with_timestamp_basic_test
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6645
Reviewed By: ltamasi
Differential Revision: D20960012
Pulled By: riversand963
fbshipit-source-id: ad377fa9eb481bf7a8a3e1824aaade48cdc653a4
Summary:
Although there are tests related to locking in transaction_test, this new test directly tests against TransactionLockMgr.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6599
Test Plan: make transaction_lock_mgr_test && ./transaction_lock_mgr_test
Reviewed By: lth
Differential Revision: D20673749
Pulled By: cheng-chang
fbshipit-source-id: 1fa4a13218e68d785f5a99924556751a8c5c0f31
Summary:
Adding a simple timer support to schedule work at a fixed time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6543
Test Plan: TODO: clean up the unit tests, and make them better.
Reviewed By: siying
Differential Revision: D20465390
Pulled By: sagar0
fbshipit-source-id: cba143f70b6339863e1d0f8b8bf92e51c2b3d678
Summary:
This PR adds support for pipelined & parallel compression optimization for `BlockBasedTableBuilder`. This optimization makes block building, block compression and block appending a pipeline, and uses multiple threads to accelerate block compression. Users can set `CompressionOptions::parallel_threads` greater than 1 to enable compression parallelism.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6262
Reviewed By: ajkr
Differential Revision: D20651306
fbshipit-source-id: 62125590a9c15b6d9071def9dc72589c1696a4cb
Summary:
The patch adds a couple of classes to represent metadata about
blob files: `SharedBlobFileMetaData` contains the information elements
that are immutable (once the blob file is closed), e.g. blob file number,
total number and size of blob files, checksum method/value, while
`BlobFileMetaData` contains attributes that can vary across versions like
the amount of garbage in the file. There is a single `SharedBlobFileMetaData`
for each blob file, which is jointly owned by the `BlobFileMetaData` objects
that point to it; `BlobFileMetaData` objects, in turn, are owned by `Version`s
and can also be shared if the (immutable _and_ mutable) state of the blob file
is the same in two versions.
In addition, the patch adds the blob file metadata to `VersionStorageInfo`, and extends
`VersionBuilder` so that it can apply blob file related `VersionEdit`s (i.e. those
containing `BlobFileAddition`s and/or `BlobFileGarbage`), and save blob file metadata
to a new `VersionStorageInfo`. Consistency checks are also extended to ensure
that table files point to blob files that are part of the `Version`, and that all blob files
that are part of any given `Version` have at least some _non_-garbage data in them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6597
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D20656803
Pulled By: ltamasi
fbshipit-source-id: f1f74d135045b3b42d0146f03ee576ef0a4bfd80
Summary:
There are situations when RocksDB tries to recover, but the db is in an inconsistent state due to SST files referenced in the MANIFEST being missing. In this case, previous RocksDB will just fail the recovery and return a non-ok status.
This PR enables another possibility. During recovery, RocksDB checks possible MANIFEST files, and try to recover to the most recent state without missing table file. `VersionSet::Recover()` applies version edits incrementally and "materializes" a version only when this version does not reference any missing table file. After processing the entire MANIFEST, the version created last will be the latest version.
`DBImpl::Recover()` calls `VersionSet::Recover()`. Afterwards, WAL replay will *not* be performed.
To use this capability, set `options.best_efforts_recovery = true` when opening the db. Best-efforts recovery is currently incompatible with atomic flush.
Test plan (on devserver):
```
$make check
$COMPILE_WITH_ASAN=1 make all && make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6334
Reviewed By: anand1976
Differential Revision: D19778960
Pulled By: riversand963
fbshipit-source-id: c27ea80f29bc952e7d3311ecf5ee9c54393b40a8
Summary:
By supporting direct IO in RandomAccessFileReader::MultiRead, the benefits of parallel IO (IO uring) and direct IO can be combined.
In direct IO mode, read requests are aligned and merged together before being issued to RandomAccessFile::MultiRead, so blocks in the original requests might share the same underlying buffer, the shared buffers are returned in `aligned_bufs`, which is a new parameter of the `MultiRead` API.
For example, suppose alignment requirement for direct IO is 4KB, one request is (offset: 1KB, len: 1KB), another request is (offset: 3KB, len: 1KB), then since they all belong to page (offset: 0, len: 4KB), `MultiRead` only reads the page with direct IO into a buffer on heap, and returns 2 Slices referencing regions in that same buffer. See `random_access_file_reader_test.cc` for more examples.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6446
Test Plan: Added a new test `random_access_file_reader_test.cc`.
Reviewed By: anand1976
Differential Revision: D20097518
Pulled By: cheng-chang
fbshipit-source-id: ca48a8faf9c3af146465c102ef6b266a363e78d1
Summary:
Right now block based table iterator is used as both of iterating data for block based table, and for the index iterator for partitioend index. This was initially convenient for introducing a new iterator and block type for new index format, while reducing code change. However, these two usage doesn't go with each other very well. For example, Prev() is never called for partitioned index iterator, and some other complexity is maintained in block based iterators, which is not needed for index iterator but maintainers will always need to reason about it. Furthermore, the template usage is not following Google C++ Style which we are following, and makes a large chunk of code tangled together. This commit separate the two iterators. Right now, here is what it is done:
1. Copy the block based iterator code into partitioned index iterator, and de-template them.
2. Remove some code not needed for partitioned index. The upper bound check and tricks are removed. We never tested performance for those tricks when partitioned index is enabled in the first place. It's unlikelyl to generate performance regression, as creating new partitioned index block is much rarer than data blocks.
3. Separate out the prefetch logic to a helper class and both classes call them.
This commit will enable future follow-ups. One direction is that we might separate index iterator interface for data blocks and index blocks, as they are quite different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6531
Test Plan: build using make and cmake. And build release
Differential Revision: D20473108
fbshipit-source-id: e48011783b339a4257c204cc07507b171b834b0f
Summary:
In some of the test, db_basic_test may cause time out due to its long running time. Separate the timestamp related test from db_basic_test to avoid the potential issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6516
Test Plan: pass make asan_check
Differential Revision: D20423922
Pulled By: zhichao-cao
fbshipit-source-id: d6306f89a8de55b07bf57233e4554c09ef1fe23a
Summary:
block_based_table_reader.cc is a giant file, which makes it hard for users to navigate the code. Divide the files to multiple files.
Some class templates cannot be moved to .cc file. They are moved to .h files. It is still better than including them all in block_based_table_reader.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6527
Test Plan: "make all check" and "make release". Also build using cmake.
Differential Revision: D20428455
fbshipit-source-id: ca713c698469f07f35bc0c271358c0874ed4eb28
Summary:
In Linux, when reopening DB with many SST files, profiling shows that 100% system cpu time spent for a couple of seconds for `GetLogicalBufferSize`. This slows down MyRocks' recovery time when site is down.
This PR introduces two new APIs:
1. `Env::RegisterDbPaths` and `Env::UnregisterDbPaths` lets `DB` tell the env when it starts or stops using its database directories . The `PosixFileSystem` takes this opportunity to set up a cache from database directories to the corresponding logical block sizes.
2. `LogicalBlockSizeCache` is defined only for OS_LINUX to cache the logical block sizes.
Other modifications:
1. rename `logical buffer size` to `logical block size` to be consistent with Linux terms.
2. declare `GetLogicalBlockSize` in `PosixHelper` to expose it to `PosixFileSystem`.
3. change the functions `IOError` and `IOStatus` in `env/io_posix.h` to have external linkage since they are used in other translation units too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6457
Test Plan:
1. A new unit test is added for `LogicalBlockSizeCache` in `env/io_posix_test.cc`.
2. A new integration test is added for `DB` operations related to the cache in `db/db_logical_block_size_cache_test.cc`.
`make check`
Differential Revision: D20131243
Pulled By: cheng-chang
fbshipit-source-id: 3077c50f8065c0bffb544d8f49fb10bba9408d04
Summary:
It's never too soon to refactor something. The patch splits the recently
introduced (`VersionEdit` related) `BlobFileState` into two classes
`BlobFileAddition` and `BlobFileGarbage`. The idea is that once blob files
are closed, they are immutable, and the only thing that changes is the
amount of garbage in them. In the new design, `BlobFileAddition` contains
the immutable attributes (currently, the count and total size of all blobs, checksum
method, and checksum value), while `BlobFileGarbage` contains the mutable
GC-related information elements (count and total size of garbage blobs). This is a
better fit for the GC logic and is more consistent with how SST files are handled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6502
Test Plan: `make check`
Differential Revision: D20348352
Pulled By: ltamasi
fbshipit-source-id: ff93f0121e80ab15e0e0a6525ba0d6af16a0e008
Summary:
In the current code base, we can use FaultInjectionTestEnv to simulate the env issue such as file write/read errors, which are used in most of the test. The PR https://github.com/facebook/rocksdb/issues/5761 introduce the File System as a new Env API. This PR implement the FaultInjectionTestFS, which can be used to simulate when File System has issues such as IO error. user can specify any IOStatus error as input, such that FS corresponding actions will return certain error to the caller.
A set of ErrorHandlerFSTests are introduced for testing
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6414
Test Plan: pass make asan_check, pass error_handler_fs_test.
Differential Revision: D20252421
Pulled By: zhichao-cao
fbshipit-source-id: e922038f8ce7e6d1da329fd0bba7283c4b779a21
Summary:
BlobDB currently does not keep track of blob files: no records are written to
the manifest when a blob file is added or removed, and upon opening a database,
the list of blob files is populated simply based on the contents of the blob directory.
This means that lost blob files cannot be detected at the moment. We plan to solve
this issue by making blob files a part of `Version`; as a first step, this patch makes
it possible to store information about blob files in `VersionEdit`. Currently, this information
includes blob file number, total number and size of all blobs, and total number and size
of garbage blobs. However, the format is extensible: new fields can be added in
both a forward compatible and a forward incompatible manner if needed (similarly
to `kNewFile4`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6416
Test Plan: `make check`
Differential Revision: D19894234
Pulled By: ltamasi
fbshipit-source-id: f9753e1f2aedf6dadb70c09b345207cb9c58c329
Summary:
The known bug of liburing has been fixed. Now we can re-enable liburing under Linux
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6451
Test Plan: Watch internal CI
Differential Revision: D20079009
fbshipit-source-id: 04a6f53a900ff721f9a62a188cf906771b5d68d2
Summary:
Since IO Uring feature is not stable. Remove it from buck configuration.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6415
Test Plan: See internal build pass
Differential Revision: D19892988
fbshipit-source-id: 7fc01efc2af5ed707fb8e4e4674223aeb83cd5ea
Summary:
Add a utility class `Defer` to defer the execution of a function until the Defer object goes out of scope.
Used in VersionSet:: ProcessManifestWrites as an example.
The inline comments for class `Defer` have more details.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6382
Test Plan: `make defer_test version_set_test && ./defer_test && ./version_set_test`
Differential Revision: D19797538
Pulled By: cheng-chang
fbshipit-source-id: b1a9b7306e4fd4f48ec2ab55783caa561a315f0f
Summary:
In the current code base, RocksDB generate the checksum for each block and verify the checksum at usage. Current PR enable SST file checksum. After a SST file is generated by Flush or Compaction, RocksDB generate the SST file checksum and store the checksum value and checksum method name in the vs_info and MANIFEST as part for the FileMetadata.
Added the enable_sst_file_checksum to Options to enable or disable file checksum. Added sst_file_checksum to Options such that user can plugin their own SST file checksum calculate method via overriding the SstFileChecksum class. The checksum information inlcuding uint32_t checksum value and a checksum name (string). A new tool is added to LDB such that user can dump out a list of file checksum information from MANIFEST. If user enables the file checksum but does not provide the sst_file_checksum instance, RocksDB will use the default crc32checksum implemented in table/sst_file_checksum_crc32c.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6216
Test Plan: Added the testing case in table_test and ldb_cmd_test to verify checksum is correct in different level. Pass make asan_check.
Differential Revision: D19171461
Pulled By: zhichao-cao
fbshipit-source-id: b2e53479eefc5bb0437189eaa1941670e5ba8b87
Summary:
It's logically correct for PinnableSlice to support move semantics to transfer ownership of the pinned memory region. This PR adds both move constructor and move assignment to PinnableSlice.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6374
Test Plan:
A set of unit tests for the move semantics are added in slice_test.
So `make slice_test && ./slice_test`.
Differential Revision: D19739254
Pulled By: cheng-chang
fbshipit-source-id: f898bd811bb05b2d87384ec58b645e9915e8e0b1
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
Summary:
And clean up related code, especially in stress test.
(More clean up of db_stress_test_base.cc coming after this.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6154
Test Plan: make check, make blackbox_crash_test for a bit
Differential Revision: D18938180
Pulled By: pdillinger
fbshipit-source-id: 524d27621b8dbb25f6dff40f1081e7c00630357e
Summary:
db_stress_tool.cc now is a giant file. In order to main it easier to improve and maintain, break it down to multiple source files.
Most classes are turned into their own files. Separate .h and .cc files are created for gflag definiations. Another .h and .cc files are created for some common functions. Some test execution logic that is only loosely related to class StressTest is moved to db_stress_driver.h and db_stress_driver.cc. All the files are located under db_stress_tool/. The directory name is created as such because if we end it with either stress or test, .gitignore will ignore any file under it and makes it prone to issues in developements.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6134
Test Plan: Build under GCC7 with and without LITE on using GNU Make. Build with GCC 4.8. Build with cmake with -DWITH_TOOL=1
Differential Revision: D18876064
fbshipit-source-id: b25d0a7451840f31ac0f5ebb0068785f783fdf7d
Summary:
Right now, PosixRandomAccessFile::MultiRead() executes read requests in parallel. In this PR, it leverages I/O Uring library to run it in parallel, even when page cache is enabled. This function will fall back if the kernel version doesn't support it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5881
Test Plan: Run the unit test on a kernel version supporting it and make sure all tests pass, and run a unit test on kernel version supporting it and see it pass. Before merging, will also run stress test and see it passes.
Differential Revision: D17742266
fbshipit-source-id: e05699c925ac04fdb42379456a4e23e4ebcb803a
Summary:
Had complications with LITE build and valgrind test.
Reverts/fixes small parts of PR https://github.com/facebook/rocksdb/issues/6007
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6036
Test Plan:
make LITE=1 all check
and
ROCKSDB_VALGRIND_RUN=1 DISABLE_JEMALLOC=1 make -j24 db_bloom_filter_test && ROCKSDB_VALGRIND_RUN=1 DISABLE_JEMALLOC=1 ./db_bloom_filter_test
Differential Revision: D18512238
Pulled By: pdillinger
fbshipit-source-id: 37213cf0d309edf11c483fb4b2fb6c02c2cf2b28
Summary:
Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter.
Speed
The improved speed, at least on recent x86_64, comes from
* Using fastrange instead of modulo (%)
* Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row.
* Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc.
* Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes.
Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed):
$ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter
Build avg ns/key: 47.7135
Mixed inside/outside queries...
Single filter net ns/op: 26.2825
Random filter net ns/op: 150.459
Average FP rate %: 0.954651
$ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter
Build avg ns/key: 47.2245
Mixed inside/outside queries...
Single filter net ns/op: 63.2978
Random filter net ns/op: 188.038
Average FP rate %: 1.13823
Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected.
The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome.
Accuracy
The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices
within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments.
Accuracy data (generalizes, except old impl gets worse with millions of keys):
Memory bits per key: FP rate percent old impl -> FP rate percent new impl
6: 5.70953 -> 5.69888
8: 2.45766 -> 2.29709
10: 1.13977 -> 0.959254
12: 0.662498 -> 0.411593
16: 0.353023 -> 0.0873754
24: 0.261552 -> 0.0060971
50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP)
Fixes https://github.com/facebook/rocksdb/issues/5857
Fixes https://github.com/facebook/rocksdb/issues/4120
Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized.
Compatibility
Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007
Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version).
Differential Revision: D18294749
Pulled By: pdillinger
fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
Summary:
The parts that are used to implement FilterPolicy /
NewBloomFilterPolicy and not used other than for the block-based table
should be consolidated under table/block_based/filter_policy*.
This change is step 2 of 2:
mv util/bloom.cc table/block_based/filter_policy.cc
This gets its own PR so that git has the best chance of following the
rename for blame purposes. Note that low-level shared implementation
details of Bloom filters remain in util/bloom_impl.h, and
util/bloom_test.cc remains where it is for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5966
Test Plan: make check
Differential Revision: D18124930
Pulled By: pdillinger
fbshipit-source-id: 823bc09025b3395f092ef46a46aa5ba92a914d84
Summary:
The parts that are used to implement FilterPolicy /
NewBloomFilterPolicy and not used other than for the block-based table
should be consolidated under table/block_based/filter_policy*. I don't
foresee sharing these APIs with e.g. the Plain Table because they don't
expose hashes for reuse in indexing.
This change is step 1 of 2:
(a) mv table/full_filter_bits_builder.h to
table/block_based/filter_policy_internal.h which I expect to expand
soon to internally reveal more implementation details for testing.
(b) consolidate eventual contents of table/block_based/filter_policy.cc
in util/bloom.cc, which has the most elaborate revision history
(see step 2 ...)
Step 2 soon to follow:
mv util/bloom.cc table/block_based/filter_policy.cc
This gets its own PR so that git has the best chance of following the
rename for blame purposes. Note that low-level shared implementation
details of Bloom filters are in util/bloom_impl.h.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5963
Test Plan: make check
Differential Revision: D18121199
Pulled By: pdillinger
fbshipit-source-id: 8f21732c3d8909777e3240e4ac3123d73140326a
Summary:
include db_stress_tool in rocksdb tools lib
Test Plan (on devserver):
```
$make db_stress
$./db_stress
$make all && make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5950
Differential Revision: D18044399
Pulled By: riversand963
fbshipit-source-id: 895585abbbdfd8b954965921dba4b1400b7af1b1
Summary:
Amongst other things, PR https://github.com/facebook/rocksdb/issues/5504 refactored the filter block readers so that
only the filter block contents are stored in the block cache (as opposed to the
earlier design where the cache stored the filter block reader itself, leading to
potentially dangling pointers and concurrency bugs). However, this change
introduced a performance hit since with the new code, the metadata fields are
re-parsed upon every access. This patch reunites the block contents with the
filter bits reader to eliminate this overhead; since this is still a self-contained
pure data object, it is safe to store it in the cache. (Note: this is similar to how
the zstd digest is handled.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5936
Test Plan:
make asan_check
filter_bench results for the old code:
```
$ ./filter_bench -quick
WARNING: Assertions are enabled; benchmarks unnecessarily slow
Building...
Build avg ns/key: 26.7153
Number of filters: 16669
Total memory (MB): 200.009
Bits/key actual: 10.0647
----------------------------
Inside queries...
Dry run (46b) ns/op: 33.4258
Single filter ns/op: 42.5974
Random filter ns/op: 217.861
----------------------------
Outside queries...
Dry run (25d) ns/op: 32.4217
Single filter ns/op: 50.9855
Random filter ns/op: 219.167
Average FP rate %: 1.13993
----------------------------
Done. (For more info, run with -legend or -help.)
$ ./filter_bench -quick -use_full_block_reader
WARNING: Assertions are enabled; benchmarks unnecessarily slow
Building...
Build avg ns/key: 26.5172
Number of filters: 16669
Total memory (MB): 200.009
Bits/key actual: 10.0647
----------------------------
Inside queries...
Dry run (46b) ns/op: 32.3556
Single filter ns/op: 83.2239
Random filter ns/op: 370.676
----------------------------
Outside queries...
Dry run (25d) ns/op: 32.2265
Single filter ns/op: 93.5651
Random filter ns/op: 408.393
Average FP rate %: 1.13993
----------------------------
Done. (For more info, run with -legend or -help.)
```
With the new code:
```
$ ./filter_bench -quick
WARNING: Assertions are enabled; benchmarks unnecessarily slow
Building...
Build avg ns/key: 25.4285
Number of filters: 16669
Total memory (MB): 200.009
Bits/key actual: 10.0647
----------------------------
Inside queries...
Dry run (46b) ns/op: 31.0594
Single filter ns/op: 43.8974
Random filter ns/op: 226.075
----------------------------
Outside queries...
Dry run (25d) ns/op: 31.0295
Single filter ns/op: 50.3824
Random filter ns/op: 226.805
Average FP rate %: 1.13993
----------------------------
Done. (For more info, run with -legend or -help.)
$ ./filter_bench -quick -use_full_block_reader
WARNING: Assertions are enabled; benchmarks unnecessarily slow
Building...
Build avg ns/key: 26.5308
Number of filters: 16669
Total memory (MB): 200.009
Bits/key actual: 10.0647
----------------------------
Inside queries...
Dry run (46b) ns/op: 33.2968
Single filter ns/op: 58.6163
Random filter ns/op: 291.434
----------------------------
Outside queries...
Dry run (25d) ns/op: 32.1839
Single filter ns/op: 66.9039
Random filter ns/op: 292.828
Average FP rate %: 1.13993
----------------------------
Done. (For more info, run with -legend or -help.)
```
Differential Revision: D17991712
Pulled By: ltamasi
fbshipit-source-id: 7ea205550217bfaaa1d5158ebd658e5832e60f29
Summary:
file_reader_writer.h and .cc contain several files and helper function, and it's hard to navigate. Separate it to multiple files and put them under file/
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5803
Test Plan: Build whole project using make and cmake.
Differential Revision: D17374550
fbshipit-source-id: 10efca907721e7a78ed25bbf74dc5410dea05987
Summary:
Move definition and implementation for ArenaWrappedDBIter into its own .h/.cc files. Also, change inlining of functions to better comply with the Google C++ style guide.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5801
Test Plan: make check
Differential Revision: D17371012
Pulled By: anand1976
fbshipit-source-id: c1361abc2851575111e357a63d88be3b3d6cb341
Summary:
DynamicBloom was being used both for memory-only and for on-disk filters, as part of the PlainTable format. To set up enhancements to the memtable Bloom filter, this splits the code into two copies and removes unused features from each copy. Adds test PlainTableDBTest.BloomSchema to ensure no accidental change to that format.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5767
Differential Revision: D17206963
Pulled By: pdillinger
fbshipit-source-id: 6cce8d55305ed0df051b4c58bdc98c8ad81d0553
Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022
Differential Revision: D14394062
Pulled By: miasantreble
fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
Summary:
This is a new API added to db.h to allow for fetching all merge operands associated with a Key. The main motivation for this API is to support use cases where doing a full online merge is not necessary as it is performance sensitive. Example use-cases:
1. Update subset of columns and read subset of columns -
Imagine a SQL Table, a row is encoded as a K/V pair (as it is done in MyRocks). If there are many columns and users only updated one of them, we can use merge operator to reduce write amplification. While users only read one or two columns in the read query, this feature can avoid a full merging of the whole row, and save some CPU.
2. Updating very few attributes in a value which is a JSON-like document -
Updating one attribute can be done efficiently using merge operator, while reading back one attribute can be done more efficiently if we don't need to do a full merge.
----------------------------------------------------------------------------------------------------
API :
Status GetMergeOperands(
const ReadOptions& options, ColumnFamilyHandle* column_family,
const Slice& key, PinnableSlice* merge_operands,
GetMergeOperandsOptions* get_merge_operands_options,
int* number_of_operands)
Example usage :
int size = 100;
int number_of_operands = 0;
std::vector<PinnableSlice> values(size);
GetMergeOperandsOptions merge_operands_info;
db_->GetMergeOperands(ReadOptions(), db_->DefaultColumnFamily(), "k1", values.data(), merge_operands_info, &number_of_operands);
Description :
Returns all the merge operands corresponding to the key. If the number of merge operands in DB is greater than merge_operands_options.expected_max_number_of_operands no merge operands are returned and status is Incomplete. Merge operands returned are in the order of insertion.
merge_operands-> Points to an array of at-least merge_operands_options.expected_max_number_of_operands and the caller is responsible for allocating it. If the status returned is Incomplete then number_of_operands will contain the total number of merge operands found in DB for key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5604
Test Plan:
Added unit test and perf test in db_bench that can be run using the command:
./db_bench -benchmarks=getmergeoperands --merge_operator=sortlist
Differential Revision: D16657366
Pulled By: vjnadimpalli
fbshipit-source-id: 0faadd752351745224ee12d4ae9ef3cb529951bf
Summary:
Users may desire to specify extra dependencies via buck. This PR allows users to pass additional dependencies as a JSON object so that the buckifier script can generate TARGETS file with desired extra dependencies.
Test plan (on dev server)
```
$python buckifier/buckify_rocksdb.py '{"fake": {"extra_deps": [":test_dep", "//fakes/module:mock1"], "extra_compiler_flags": ["-DROCKSDB_LITE", "-Os"]}}'
Generating TARGETS
Extra dependencies:
{'': {'extra_compiler_flags': [], 'extra_deps': []}, 'test_dep1': {'extra_compiler_flags': ['-O2', '-DROCKSDB_LITE'], 'extra_deps': [':fake', '//dep1/mock']}}
Generated TARGETS Summary:
- 5 libs
- 0 binarys
- 296 tests
```
Verify the TARGETS file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5648
Differential Revision: D16565043
Pulled By: riversand963
fbshipit-source-id: a6ef02274174fcf159692d7b846e828454d01e89
Summary:
This PR implements cache eviction using reinforcement learning. It includes two implementations:
1. An implementation of Thompson Sampling for the Bernoulli Bandit [1].
2. An implementation of LinUCB with disjoint linear models [2].
The idea is that a cache uses multiple eviction policies, e.g., MRU, LRU, and LFU. The cache learns which eviction policy is the best and uses it upon a cache miss.
Thompson Sampling is contextless and does not include any features.
LinUCB includes features such as level, block type, caller, column family id to decide which eviction policy to use.
[1] Daniel J. Russo, Benjamin Van Roy, Abbas Kazerouni, Ian Osband, and Zheng Wen. 2018. A Tutorial on Thompson Sampling. Found. Trends Mach. Learn. 11, 1 (July 2018), 1-96. DOI: https://doi.org/10.1561/2200000070
[2] Lihong Li, Wei Chu, John Langford, and Robert E. Schapire. 2010. A contextual-bandit approach to personalized news article recommendation. In Proceedings of the 19th international conference on World wide web (WWW '10). ACM, New York, NY, USA, 661-670. DOI=http://dx.doi.org/10.1145/1772690.1772758
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5610
Differential Revision: D16435067
Pulled By: HaoyuHuang
fbshipit-source-id: 6549239ae14115c01cb1e70548af9e46d8dc21bb
Summary:
This test frequently times out under TSAN; parallelizing it should fix
this issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5632
Test Plan:
make check
buck test mode/dev-tsan internal_repo_rocksdb/repo:db_bloom_filter_test
Differential Revision: D16519399
Pulled By: ltamasi
fbshipit-source-id: 66e05a644d6f79c6d544255ffcf6de195d2d62fe
Summary:
Make rocksdb build on macos:
1) Reorganize OS-specific flags and deps in rocksdb/src/TARGETS
2) Sandbox fbcode apple platform builds from repo root include path (which conflicts
with layout of rocksdb headers).
3) Fix dep-translation for bzip2.
Reviewed By: andrewjcg
Differential Revision: D15125826
fbshipit-source-id: 8e143c689b88b5727e54881a5e80500f879a320b
Summary:
The ObjectRegistry class replaces the Registrar and NewCustomObjects. Objects are registered with the registry by Type (the class must implement the static const char *Type() method).
This change is necessary for a few reasons:
- By having a class (rather than static template instances), the class can be passed between compilation units, meaning that objects could be registered and shared from a dynamic library with an executable.
- By having a class with instances, different units could have different objects registered. This could be useful if, for example, one Option allowed for a dynamic library and one did not.
When combined with some other PRs (being able to load shared libraries, a Configurable interface to configure objects to/from string), this code will allow objects in external shared libraries to be added to a RocksDB image at run-time, rather than requiring every new extension to be built into the main library and called explicitly by every program.
Test plan (on riversand963's devserver)
```
$COMPILE_WITH_ASAN=1 make -j32 all && sleep 1 && make check
```
All tests pass.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5293
Differential Revision: D16363396
Pulled By: riversand963
fbshipit-source-id: fbe4acb615bfc11103eef40a0b288845791c0180
Summary:
RocksDB has historically stored uncompression dictionary objects in the block
cache as opposed to storing just the block contents. This neccesitated
evicting the object upon table close. With the new code, only the raw blocks
are stored in the cache, eliminating the need for eviction.
In addition, the patch makes the following improvements:
1) Compression dictionary blocks are now prefetched/pinned similarly to
index/filter blocks.
2) A copy operation got eliminated when the uncompression dictionary is
retrieved.
3) Errors related to retrieving the uncompression dictionary are propagated as
opposed to silently ignored.
Note: the patch temporarily breaks the compression dictionary evicition stats.
They will be fixed in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5584
Test Plan: make asan_check
Differential Revision: D16344151
Pulled By: ltamasi
fbshipit-source-id: 2962b295f5b19628f9da88a3fcebbce5a5017a7b
Summary:
Refresh of the earlier change here - https://github.com/facebook/rocksdb/issues/5135
This is a review request for code change needed for - https://github.com/facebook/rocksdb/issues/3469
"Add support for taking snapshot of a column family and creating column family from a given CF snapshot"
We have an implementation for this that we have been testing internally. We have two new APIs that together provide this functionality.
(1) ExportColumnFamily() - This API is modelled after CreateCheckpoint() as below.
// Exports all live SST files of a specified Column Family onto export_dir,
// returning SST files information in metadata.
// - SST files will be created as hard links when the directory specified
// is in the same partition as the db directory, copied otherwise.
// - export_dir should not already exist and will be created by this API.
// - Always triggers a flush.
virtual Status ExportColumnFamily(ColumnFamilyHandle* handle,
const std::string& export_dir,
ExportImportFilesMetaData** metadata);
Internally, the API will DisableFileDeletions(), GetColumnFamilyMetaData(), Parse through
metadata, creating links/copies of all the sst files, EnableFileDeletions() and complete the call by
returning the list of file metadata.
(2) CreateColumnFamilyWithImport() - This API is modeled after IngestExternalFile(), but invoked only during a CF creation as below.
// CreateColumnFamilyWithImport() will create a new column family with
// column_family_name and import external SST files specified in metadata into
// this column family.
// (1) External SST files can be created using SstFileWriter.
// (2) External SST files can be exported from a particular column family in
// an existing DB.
// Option in import_options specifies whether the external files are copied or
// moved (default is copy). When option specifies copy, managing files at
// external_file_path is caller's responsibility. When option specifies a
// move, the call ensures that the specified files at external_file_path are
// deleted on successful return and files are not modified on any error
// return.
// On error return, column family handle returned will be nullptr.
// ColumnFamily will be present on successful return and will not be present
// on error return. ColumnFamily may be present on any crash during this call.
virtual Status CreateColumnFamilyWithImport(
const ColumnFamilyOptions& options, const std::string& column_family_name,
const ImportColumnFamilyOptions& import_options,
const ExportImportFilesMetaData& metadata,
ColumnFamilyHandle** handle);
Internally, this API creates a new CF, parses all the sst files and adds it to the specified column family, at the same level and with same sequence number as in the metadata. Also performs safety checks with respect to overlaps between the sst files being imported.
If incoming sequence number is higher than current local sequence number, local sequence
number is updated to reflect this.
Note, as the sst files is are being moved across Column Families, Column Family name in sst file
will no longer match the actual column family on destination DB. The API does not modify Column
Family name or id in the sst files being imported.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5495
Differential Revision: D16018881
fbshipit-source-id: 9ae2251025d5916d35a9fc4ea4d6707f6be16ff9
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
Summary:
This PR adds a ghost cache for admission control. Specifically, it admits an entry on its second access.
It also adds a hybrid row-block cache that caches the referenced key-value pairs of a Get/MultiGet request instead of its blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5534
Test Plan: make clean && COMPILE_WITH_ASAN=1 make check -j32
Differential Revision: D16101124
Pulled By: HaoyuHuang
fbshipit-source-id: b99edda6418a888e94eb40f71ece45d375e234b1
