Commit Graph

334 Commits

Author SHA1 Message Date
sdong
b9f77ba12b When slowdown is triggered, reduce the write rate
Summary: It's usually hard for users to set a value of options.delayed_write_rate. With this diff, after slowdown condition triggers, we greedily reduce write rate if estimated pending compaction bytes increase. If estimated compaction pending bytes drop, we increase the write rate.

Test Plan:
Add a unit test
Test with db_bench setting:
TEST_TMPDIR=/dev/shm/ ./db_bench --benchmarks=fillrandom -num=10000000 --soft_pending_compaction_bytes_limit=1000000000 --hard_pending_compaction_bytes_limit=3000000000 --delayed_write_rate=100000000

and make sure without the commit, write stop will happen, but with the commit, it will not happen.

Reviewers: igor, anthony, rven, yhchiang, kradhakrishnan, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D52131
2015-12-23 11:33:15 -08:00
Venkatesh Radhakrishnan
7b12ae97d4 Add signalall after removing item from manual_compaction deque
Summary:
When there are waiting manual compactions, we need to signal
them after removing the current manual compaction from the deque.

Test Plan: ColumnFamilytTest.SameCFManualManualCommaction

Reviewers: anthony, IslamAbdelRahman, kradhakrishnan, sdong

Reviewed By: sdong

Subscribers: dhruba, yoshinorim

Differential Revision: https://reviews.facebook.net/D52119
2015-12-17 16:59:00 -08:00
Venkatesh Radhakrishnan
030215bf01 Running manual compactions in parallel with other automatic or manual compactions in restricted cases
Summary:
This diff provides a framework for doing manual
compactions in parallel with other compactions. We now have a deque of manual compactions. We also pass manual compactions as an argument from RunManualCompactions down to
BackgroundCompactions, so that RunManualCompactions can be reentrant.
Parallelism is controlled by the two routines
ConflictingManualCompaction to allow/disallow new parallel/manual
compactions based on already existing ManualCompactions. In this diff, by default manual compactions still have to run exclusive of other compactions. However, by setting the compaction option, exclusive_manual_compaction to false, it is possible to run other compactions in parallel with a manual compaction. However, we are still restricted to one manual compaction per column family at a time. All of these restrictions will be relaxed in future diffs.
I will be adding more tests later.

Test Plan: Rocksdb regression + new tests + valgrind

Reviewers: igor, anthony, IslamAbdelRahman, kradhakrishnan, yhchiang, sdong

Reviewed By: sdong

Subscribers: yoshinorim, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D47973
2015-12-14 11:20:34 -08:00
agiardullo
3bfd3d39a3 Use SST files for Transaction conflict detection
Summary:
Currently, transactions can fail even if there is no actual write conflict.  This is due to relying on only the memtables to check for write-conflicts.  Users have to tune memtable settings to try to avoid this, but it's hard to figure out exactly how to tune these settings.

With this diff, TransactionDB will use both memtables and SST files to determine if there are any write conflicts.  This relies on the fact that BlockBasedTable stores sequence numbers for all writes that happen after any open snapshot.  Also, D50295 is needed to prevent SingleDelete from disappearing writes (the TODOs in this test code will be fixed once the other diff is approved and merged).

Note that Optimistic transactions will still rely on tuning memtable settings as we do not want to read from SST while on the write thread.  Also, memtable settings can still be used to reduce how often TransactionDB needs to read SST files.

Test Plan: unit tests, db bench

Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb, yoshinorim

Differential Revision: https://reviews.facebook.net/D50475
2015-12-11 12:34:11 -08:00
Yueh-Hsuan Chiang
774b80e99e Resubmit the fix for a race condition in persisting options
Summary:
This patch fix a race condition in persisting options which will cause a crash when:

* Thread A obtain cf options and start to persist options based on that cf options.
* Thread B kicks in and finish DropColumnFamily and delete cf_handle.
* Thread A wakes up and tries to finish the persisting options and crashes.

Test Plan: Add a test in column_family_test that can reproduce the crash

Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, sdong

Reviewed By: sdong

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D51717
2015-12-08 17:01:02 -08:00
agiardullo
e5c5f23814 Support marking snapshots for write-conflict checking - Take 2
Summary:
D51183 was reverted due to breaking the LITE build.

This diff is the same as D51183 but with a fix for the LITE BUILD(D51693)

Test Plan: run all unit tests

Reviewers: sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D51711
2015-12-08 16:47:31 -08:00
sdong
1d63c3d610 Revert "Support marking snapshots for write-conflict checking"
This reverts commit ec704aafdc for it broke RocksDB LITE build.
2015-12-08 09:27:17 -08:00
agiardullo
ec704aafdc Support marking snapshots for write-conflict checking
Summary:
D50475 enables using SST files for transaction write-conflict checking.  In order for this to work, we need to make sure not to compact out SingleDeletes when there is an earlier transaction snapshot(D50295).  If there is a long-held snapshot, this could reduce the benefit of the SingleDelete optimization.

This diff allows Transactions to mark snapshots as being used for write-conflict checking.  Then, during compaction, we will be able to optimize SingleDeletes better in the future.

This diff adds a flag to SnapshotImpl which is used by Transactions.  This diff also passes the earliest write-conflict snapshot's sequence number to CompactionIterator.  This diff does not actually change Compaction (after this diff is pushed, D50295 will be able to use this information).

Test Plan: no behavior change, ran existing tests

Reviewers: rven, kradhakrishnan, yhchiang, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D51183
2015-12-07 19:40:51 -08:00
sdong
f307036bde Revert "Fix a race condition in persisting options"
This reverts commit 2fa3ed5180. It breaks RocksDB lite build
2015-12-07 17:09:12 -08:00
Yueh-Hsuan Chiang
2fa3ed5180 Fix a race condition in persisting options
Summary:
This patch fix a race condition in persisting options which will cause a crash when:

* Thread A obtain cf options and start to persist options based on that cf options.
* Thread B kicks in and finish DropColumnFamily and delete cf_handle.
* Thread A wakes up and tries to finish the persisting options and crashes.

Test Plan: Add a test in column_family_test that can reproduce the crash

Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D51609
2015-12-07 15:25:12 -08:00
Alex Yang
e8180f9901 added public api to schedule flush/compaction, code to prevent race with db::open
Summary:
Fixes T8781168.

Added a new function EnableAutoCompactions in db.h to be publicly
avialable.  This allows compaction to be re-enabled after disabling it via
SetOptions

Refactored code to set the dbptr earlier on in TransactionDB::Open and DB::Open
Temporarily disable auto_compaction in TransactionDB::Open until dbptr is set to
prevent race condition.

Test Plan:
Ran make all check

verified fix on myrocks side:
was able to reproduce the seg fault with
../tools/mysqltest.sh --mem --force rocksdb.drop_table

method was to manually sleep the thread after DB::Open but before TransactionDB ptr was
assigned in transaction_db_impl.cc:
  DB::Open(db_options, dbname, column_families_copy, handles, &db);
  clock_t goal = (60000 * 10) + clock();
  while (goal > clock());
  ...dbptr(aka rdb) gets assigned below

verified my changes fixed the issue.

Also added unit test 'ToggleAutoCompaction' in transaction_test.cc

Reviewers: hermanlee4, anthony

Reviewed By: anthony

Subscribers: alex, dhruba

Differential Revision: https://reviews.facebook.net/D51147
2015-12-03 22:59:44 -08:00
sdong
f9103d9a30 DBTest.DynamicCompactionOptions: More deterministic and readable
Summary: DBTest.DynamicCompactionOptions sometimes fails the assert but I can't repro it locally. Make it more deterministic and readable and see whether the problem is still there.

Test Plan: Run tht test and make sure it passes

Reviewers: kradhakrishnan, yhchiang, igor, rven, IslamAbdelRahman, anthony

Reviewed By: anthony

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D51309
2015-12-01 16:49:47 -08:00
Yueh-Hsuan Chiang
e114f0abb8 Enable RocksDB to persist Options file.
Summary:
This patch allows rocksdb to persist options into a file on
DB::Open, SetOptions, and Create / Drop ColumnFamily.
Options files are created under the same directory as the rocksdb
instance.

In addition, this patch also adds a fail_if_missing_options_file in DBOptions
that makes any function call return non-ok status when it is not able to
persist options properly.

  // If true, then DB::Open / CreateColumnFamily / DropColumnFamily
  // / SetOptions will fail if options file is not detected or properly
  // persisted.
  //
  // DEFAULT: false
  bool fail_if_missing_options_file;

Options file names are formatted as OPTIONS-<number>, and RocksDB
will always keep the latest two options files.

Test Plan:
Add options_file_test.

options_test
column_family_test

Reviewers: igor, IslamAbdelRahman, sdong, anthony

Reviewed By: anthony

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D48285
2015-11-10 22:58:01 -08:00
Yueh-Hsuan Chiang
7d7ee2b654 Add Memory Insight support to utilities
Summary:
This patch introduces utilities/memory, which currently includes
GetApproximateMemoryUsageByType that reports different types of
rocksdb memory usage given a list of input DBs.

The API also take care of the case where Cache could be shared
across multiple column families / multiple db instances.

Currently, it reports memory usage of memtable, table-readers
and cache.

Test Plan: utilities/memory/memory_test.cc

Reviewers: igor, anthony, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D49257
2015-11-03 17:52:17 -08:00
Yueh-Hsuan Chiang
3ecbab0040 Add GetAggregatedIntProperty(): returns the aggregated value from all CFs
Summary:
This patch adds GetAggregatedIntProperty() that returns the aggregated
value from all CFs

Test Plan: Added a test in db_test

Reviewers: igor, sdong, anthony, IslamAbdelRahman, rven

Reviewed By: rven

Subscribers: rven, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D49497
2015-11-03 15:54:18 -08:00
Siying Dong
138876a62c Merge pull request #746 from ceph/wip-recycle
Add Options.recycle_log_file_num for Recycling WAL Files
2015-10-26 15:01:28 -07:00
Alexey Maykov
f18acd8875 Fixed the clang compilation failure
Summary: As above.

Test Plan: USE_CLANG=1 make check -j

Reviewers: igor

Reviewed By: igor

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D48981
2015-10-19 10:38:50 -07:00
Sage Weil
666376150c db_impl: recycle log files
If log recycling is enabled, put old WAL files on a recycle queue instead of
deleting them.  When we need a new log file, take a recycled file off the
list if one is available.

Signed-off-by: Sage Weil <sage@redhat.com>
2015-10-18 21:24:32 -04:00
Alexey Maykov
e1a09a7703 Implementation for GetPropertiesOfTablesInRange
Summary: In MyRocks, it is sometimes important to get propeties only for the subset of the database. This diff implements the API in RocksDB.

Test Plan: ran the GetPropertiesOfTablesInRange

Reviewers: rven, sdong

Reviewed By: sdong

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D48651
2015-10-17 13:34:43 -07:00
Yueh-Hsuan Chiang
ad471453e8 Allow GetProperty to report the number of currently running flushes / compactions.
Summary:
Add rocksdb.num-running-compactions and rocksdb.num-running-flushes
to GetIntProperty() that reports the number of currently running
compactions / flushes.

Test Plan: augmented existing tests in db_test

Reviewers: igor, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D48693
2015-10-17 00:16:36 -07:00
sdong
35ad531be3 Seperate InternalIterator from Iterator
Summary:
Separate a new class InternalIterator from class Iterator, when the look-up is done internally, which also means they operate on key with sequence ID and type.

This change will enable potential future optimizations but for now InternalIterator's functions are still the same as Iterator's.
At the same time, separate the cleanup function to a separate class and let both of InternalIterator and Iterator inherit from it.

Test Plan: Run all existing tests.

Reviewers: igor, yhchiang, anthony, kradhakrishnan, IslamAbdelRahman, rven

Reviewed By: rven

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D48549
2015-10-13 15:32:13 -07:00
Islam AbdelRahman
7f58ff7c31 Remove db_impl_debug from release build
Summary:
Remove db_impl_debug from NDEBUG, but allow it in ROCKSDB_LITE
These functions by definition should not be included in NDEBUG and they are only used for testing
This is based on offline discussion with @yhchiang and @igor

Test Plan:
make static_lib
make check

Reviewers: igor, sdong, yhchiang

Reviewed By: yhchiang

Subscribers: igor, yhchiang, dhruba

Differential Revision: https://reviews.facebook.net/D48573
2015-10-12 17:35:43 -07:00
Islam AbdelRahman
c64ae05b1c Move TEST_NewInternalIterator to NewInternalIterator
Summary:
Long time ago we add InternalDumpCommand to ldb_tool https://reviews.facebook.net/D11517
This command is using TEST_NewInternalIterator although it's not a test. This patch move TEST_NewInternalIterator outside of db_impl_debug.cc

Test Plan:
make check
make static_lib

Reviewers: yhchiang, igor, sdong

Reviewed By: sdong

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D48561
2015-10-12 17:22:37 -07:00
Alexey Maykov
3d07b815f6 Passing table properties to compaction callback
Summary: It would be nice to have and access to table properties in compaction callbacks. In MyRocks project, it will make possible to update optimizer statistics online.

Test Plan: ran the unit test. Ran myrocks with the new way of collecting stats.

Reviewers: igor, rven, yhchiang

Reviewed By: yhchiang

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D48267
2015-10-09 18:10:55 -07:00
Igor Canadi
9803e0d813 compaction_filter.h cleanup
Summary:
Two changes:
1. remove *V2 filter stuff. we deprecated that a while ago
2. clarify what happens when user sets max_subcompactions to bigger than 1

Test Plan: none

Reviewers: yhchiang, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D47871
2015-10-08 09:32:50 -07:00
Igor Canadi
115427ef63 Add APIs PauseBackgroundWork() and ContinueBackgroundWork()
Summary:
To support a new MongoDB capability, we need to make sure that we don't do any IO for a short period of time. For background, see:
* https://jira.mongodb.org/browse/SERVER-20704
* https://jira.mongodb.org/browse/SERVER-18899

To implement that, I add a new API calls PauseBackgroundWork() and ContinueBackgroundWork() which reuse the capability we already have in place for RefitLevel() function.

Test Plan: Added a new test in db_test. Made sure that test fails when PauseBackgroundWork() is commented out.

Reviewers: IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D47901
2015-10-02 13:17:34 -07:00
Islam AbdelRahman
f03b5c987b Add experimental DB::AddFile() to plug sst files into empty DB
Summary:
This is an initial version of bulk load feature

This diff allow us to create sst files, and then bulk load them later, right now the restrictions for loading an sst file are
(1) Memtables are empty
(2) Added sst files have sequence number = 0, and existing values in database have sequence number = 0
(3) Added sst files values are not overlapping

Test Plan: unit testing

Reviewers: igor, ott, sdong

Reviewed By: sdong

Subscribers: leveldb, ott, dhruba

Differential Revision: https://reviews.facebook.net/D39081
2015-09-23 12:42:43 -07:00
Andres Noetzli
014fd55adc Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).

In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.

Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.

Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
  deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
  this patch supported this so it could be resurrected if needed)

Test Plan: make all check

Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor

Reviewed By: igor

Subscribers: maykov, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 11:42:56 -07:00
Andres Noetzli
3c9cef1eed Unified maps with Comparator for sorting, other cleanup
Summary:
This diff is a collection of cleanups that were initially part of D43179.
Additionally it adds a unified way of defining key-value maps that use a
Comparator for sorting (this was previously implemented in four different
places).

Test Plan: make clean check all

Reviewers: rven, anthony, yhchiang, sdong, igor

Reviewed By: igor

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D45993
2015-09-02 13:58:22 -07:00
agiardullo
c2f2cb0214 Pessimistic Transactions
Summary:
Initial implementation of Pessimistic Transactions.  This diff contains the api changes discussed in D38913.  This diff is pretty large, so let me know if people would prefer to meet up to discuss it.

MyRocks folks:  please take a look at the API in include/rocksdb/utilities/transaction[_db].h and let me know if you have any issues.

Also, you'll notice a couple of TODOs in the implementation of RollbackToSavePoint().  After chatting with Siying, I'm going to send out a separate diff for an alternate implementation of this feature that implements the rollback inside of WriteBatch/WriteBatchWithIndex.  We can then decide which route is preferable.

Next, I'm planning on doing some perf testing and then integrating this diff into MongoRocks for further testing.

Test Plan: Unit tests, db_bench parallel testing.

Reviewers: igor, rven, sdong, yhchiang, yoshinorim

Reviewed By: sdong

Subscribers: hermanlee4, maykov, spetrunia, leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D40869
2015-08-11 17:52:23 -07:00
agiardullo
16ea1c7d1c simple ManagedSnapshot wrapper
Summary: Implemented this simple wrapper for something else I was working on.  Seemed like it makes sense to expose it instead of burying it in some random code.

Test Plan: added test

Reviewers: rven, kradhakrishnan, sdong, yhchiang

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D43293
2015-08-06 17:59:05 -07:00
sdong
6a4aaadcd7 Avoid type unique_ptr in LogWriterNumber::writer for Windows build break
Summary:
Visual Studio complains about deque<LogWriterNumber> because LogWriterNumber is non-copyable for its unique_ptr member writer. Move away from it, and do explit free.
It is less safe but I can't think of a better way to unblock it.

Test Plan: valgrind check test

Reviewers: anthony, IslamAbdelRahman, kolmike, rven, yhchiang

Reviewed By: yhchiang

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D43647
2015-08-06 10:52:41 -07:00
Mike Kolupaev
e06cf1a098 [wal changes 3/3] method in DB to sync WAL without blocking writers
Summary:
Subj. We really need this feature.

Previous diff D40899 has most of the changes to make this possible, this diff just adds the method.

Test Plan: `make check`, the new test fails without this diff; ran with ASAN, TSAN and valgrind.

Reviewers: igor, rven, IslamAbdelRahman, anthony, kradhakrishnan, tnovak, yhchiang, sdong

Reviewed By: sdong

Subscribers: MarkCallaghan, maykov, hermanlee4, yoshinorim, tnovak, dhruba

Differential Revision: https://reviews.facebook.net/D40905
2015-08-05 06:06:39 -07:00
Mike Kolupaev
fe09a6dae3 [wal changes 2/3] write with sync=true syncs previous unsynced wals to prevent illegal data loss
Summary:
I'll just copy internal task summary here:

"
This sequence will cause data loss in the middle after an sync write:

non-sync write key 1
flush triggered, not yet scheduled
sync write key 2
system crash

After rebooting, users might see key 2 but not key 1, which violates the API of sync write.

This can be reproduced using unit test FaultInjectionTest::DISABLED_WriteOptionSyncTest.

One way to fix it is for a sync write, if there is outstanding unsynced log files, we need to syc them too.
"

This diff should be considered together with the next diff D40905; in isolation this fix probably could be a little simpler.

Test Plan: `make check`; added a test for that (DBTest.SyncingPreviousLogs) before noticing FaultInjectionTest.WriteOptionSyncTest (keeping both since mine asserts a bit more); both tests fail without this diff; for D40905 stacked on top of this diff, ran tests with ASAN, TSAN and valgrind

Reviewers: rven, yhchiang, IslamAbdelRahman, anthony, kradhakrishnan, igor, sdong

Reviewed By: sdong

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D40899
2015-07-22 03:28:08 -07:00
Igor Canadi
35ca59364c Don't let flushes preempt compactions
Summary:
When we first started, max_background_flushes was 0 by default and compaction thread was executing flushes (since there was no flush thread). Then, we switched the default max_background_flushes to 1. However, we still support the case where there is no flush thread and flushes are done in compaction. This is making our code a bit more complicated. By not supporting this use-case we can make our code simpler.

We have a special case that when you set max_background_flushes to 0, we
schedule the flush to execute on the compaction thread.

Test Plan: make check (there might be some unit tests that depend on this behavior)

Reviewers: IslamAbdelRahman, yhchiang, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D41931
2015-07-17 12:02:52 -07:00
Igor Canadi
5aea98ddd8 Deprecate WriteOptions::timeout_hint_us
Summary:
In one of our recent meetings, we discussed deprecating features that are not being actively used. One of those features, at least within Facebook, is timeout_hint. The feature is really nicely implemented, but if nobody needs it, we should remove it from our code-base (until we get a valid use-case). Some arguments:
* Less code == better icache hit rate, smaller builds, simpler code
* The motivation for adding timeout_hint_us was to work-around RocksDB's stall issue. However, we're currently addressing the stall issue itself (see @sdong's recent work on stall write_rate), so we should never see sharp lock-ups in the future.
* Nobody is using the feature within Facebook's code-base. Googling for `timeout_hint_us` also doesn't yield any users.

Test Plan: make check

Reviewers: anthony, kradhakrishnan, sdong, yhchiang

Reviewed By: yhchiang

Subscribers: sdong, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D41937
2015-07-14 09:35:48 +02:00
sdong
76d3cd3286 Fix public API dependency on internal codes and dependency on MAX_INT32
Summary:
Public API depends on port/port.h which is wrong. Fix it.
Also with gcc 4.8.1 build was broken as MAX_INT32 was not recognized. Fix it by using ::max in linux.

Test Plan: Build it and try to build an external project on top of it.

Reviewers: anthony, yhchiang, kradhakrishnan, igor

Reviewed By: igor

Subscribers: yoshinorim, leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D41745
2015-07-11 10:32:11 -07:00
Dmitri Smirnov
c903ccc4c2 Merge from github/master 2015-07-09 18:01:08 -07:00
Mike Kolupaev
218487d8dc [wal changes 1/3] fixed unbounded wal growth in some workloads
Summary:
This fixes the following scenario we've hit:
 - we reached max_total_wal_size, created a new wal and scheduled flushing all memtables corresponding to the old one,
 - before the last of these flushes started its column family was dropped; the last background flush call was a no-op; no one removed the old wal from alive_logs_,
 - hours have passed and no flushes happened even though lots of data was written; data is written to different column families, compactions are disabled; old column families are dropped before memtable grows big enough to trigger a flush; the old wal still sits in alive_logs_ preventing max_total_wal_size limit from kicking in,
 - a few more hours pass and we run out disk space because of one huge .log file.

Test Plan: `make check`; backported the new test, checked that it fails without this diff

Reviewers: igor

Reviewed By: igor

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D40893
2015-07-02 14:27:00 -07:00
Dmitri Smirnov
18285c1e2f Windows Port from Microsoft
Summary: Make RocksDb build and run on Windows to be functionally
 complete and performant. All existing test cases run with no
 regressions. Performance numbers are in the pull-request.

 Test plan: make all of the existing unit tests pass, obtain perf numbers.

 Co-authored-by: Praveen Rao praveensinghrao@outlook.com
 Co-authored-by: Sherlock Huang baihan.huang@gmail.com
 Co-authored-by: Alex Zinoviev alexander.zinoviev@me.com
 Co-authored-by: Dmitri Smirnov dmitrism@microsoft.com
2015-07-01 16:13:56 -07:00
Islam AbdelRahman
12e030a992 Use CompactRangeOptions for CompactRange
Summary:
This diff update DB::CompactRange to use RangeCompactionOptions instead of using multiple parameters
Old CompactRange is still available but deprecated

Test Plan:
make all check
make rocksdbjava
USE_CLANG=1 make all
OPT=-DROCKSDB_LITE make release

Reviewers: sdong, yhchiang, igor

Reviewed By: igor

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D40209
2015-06-17 14:36:14 -07:00
Igor Canadi
25d600569d Clean up InstallSuperVersion
Summary:
We go to great lengths to make sure MaybeScheduleFlushOrCompaction() is called outside of write thread. But anyway, it's still called in the mutex, so it's not that much cheaper.

This diff removes the "optimization" and cleans up the code a bit.

Test Plan: make check

Reviewers: rven, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D40113
2015-06-17 12:37:59 -07:00
sdong
40f562e747 Allow GetApproximateSize() to include mem table size if it is skip list memtable
Summary:
Add an option in GetApproximateSize() so that the result will include estimated sizes in mem tables.
To implement it, implement an estimated count from the beginning to a key in skip list. The approach is to count to find the entry, how many Next() is issued from each level, and sum them with a weight that is <branching factor> ^ <level>.

Test Plan: Add a test case

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D40119
2015-06-16 18:13:23 -07:00
sdong
7842920be5 Slow down writes by bytes written
Summary:
We slow down data into the database to the rate of options.delayed_write_rate (a new option) with this patch.

The thread synchronization approach I take is to still synchronize write controller by DB mutex and GetDelay() is inside DB mutex. Try to minimize the frequency of getting time in GetDelay(). I verified it through db_bench and it seems to work

hard_rate_limit is deprecated.

options.delayed_write_rate is still not dynamically changeable. Need to work on it as a follow-up.

Test Plan: Add new unit tests in db_test

Reviewers: yhchiang, rven, kradhakrishnan, anthony, MarkCallaghan, igor

Reviewed By: igor

Subscribers: ikabiljo, leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D36351
2015-06-11 20:42:18 -07:00
Islam AbdelRahman
d6ce0f7c61 Add largest sequence to FlushJobInfo
Summary:
Adding largest sequence number to FlushJobInfo
and passing flushed file metadata to NotifyOnFlushCompleted which include alot of other values that we may want to expose in FlushJobInfo

Test Plan: make check

Reviewers: igor, sdong

Reviewed By: sdong

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D39927
2015-06-11 15:22:22 -07:00
Yueh-Hsuan Chiang
2e764f06ea [API Change] Improve EventListener::OnFlushCompleted interface
Summary:
EventListener::OnFlushCompleted() now passes a structure instead
of a list of parameters.  This minimizes the API change in the
future.

Test Plan:
listener_test
compact_files_test
example/compact_files_example

Reviewers: kradhakrishnan, sdong, IslamAbdelRahman, rven, igor

Reviewed By: rven, igor

Subscribers: IslamAbdelRahman, rven, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D39543
2015-06-05 12:28:51 -07:00
Islam AbdelRahman
3ce3bb3da2 Allowing L0 -> L1 trivial move on sorted data
Summary:
This diff updates the logic of how we do trivial move, now trivial move can run on any number of files in input level as long as they are not overlapping

The conditions for trivial move have been updated

Introduced conditions:
  - Trivial move cannot happen if we have a compaction filter (except if the compaction is not manual)
  - Input level files cannot be overlapping

Removed conditions:
  - Trivial move only run when the compaction is not manual
  - Input level should can contain only 1 file

More context on what tests failed because of Trivial move
```
DBTest.CompactionsGenerateMultipleFiles
This test is expecting compaction on a file in L0 to generate multiple files in L1, this test will fail with trivial move because we end up with one file in L1
```

```
DBTest.NoSpaceCompactRange
This test expect compaction to fail when we force environment to report running out of space, of course this is not valid in trivial move situation
because trivial move does not need any extra space, and did not check for that
```

```
DBTest.DropWrites
Similar to DBTest.NoSpaceCompactRange
```

```
DBTest.DeleteObsoleteFilesPendingOutputs
This test expect that a file in L2 is deleted after it's moved to L3, this is not valid with trivial move because although the file was moved it is now used by L3
```

```
CuckooTableDBTest.CompactionIntoMultipleFiles
Same as DBTest.CompactionsGenerateMultipleFiles
```

This diff is based on a work by @sdong https://reviews.facebook.net/D34149

Test Plan: make -j64 check

Reviewers: rven, sdong, igor

Reviewed By: igor

Subscribers: yhchiang, ott, march, dhruba, sdong

Differential Revision: https://reviews.facebook.net/D34797
2015-06-04 16:51:25 -07:00
Yueh-Hsuan Chiang
8afafc2783 Fix compile warning in db/db_impl
Summary:
Fix the following compile warning in db/db_impl

  db/db_impl.cc:1603:19: error: implicit conversion loses integer precision: 'const uint64_t' (aka 'const unsigned long') to 'int' [-Werror,-Wshorten-64-to-32]
     info.job_id = job_id;
                 ~ ^~~~~~

Test Plan: db_test

Reviewers: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D39423
2015-06-02 17:36:45 -07:00
Yueh-Hsuan Chiang
fe5c6321cb Allow EventListener::OnCompactionCompleted to return CompactionJobStats.
Summary:
Allow EventListener::OnCompactionCompleted to return CompactionJobStats,
which contains useful information about a compaction.

Example CompactionJobStats returned by OnCompactionCompleted():
    smallest_output_key_prefix 05000000
    largest_output_key_prefix 06990000
    elapsed_time 42419
    num_input_records 300
    num_input_files 3
    num_input_files_at_output_level 2
    num_output_records 200
    num_output_files 1
    actual_bytes_input 167200
    actual_bytes_output 110688
    total_input_raw_key_bytes 5400
    total_input_raw_value_bytes 300000
    num_records_replaced 100
    is_manual_compaction 1

Test Plan: Developed a mega test in db_test which covers 20 variables in CompactionJobStats.

Reviewers: rven, igor, anthony, sdong

Reviewed By: sdong

Subscribers: tnovak, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D38463
2015-06-02 17:07:16 -07:00
Yueh-Hsuan Chiang
fc83821270 Add EventListener::OnTableFileCreated()
Summary:
Add EventListener::OnTableFileCreated(), which will be called
when a table file is created.  This patch is part of the
EventLogger and EventListener integration.

Test Plan: Augment existing test in db/listener_test.cc

Reviewers: anthony, kradhakrishnan, rven, igor, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D38865
2015-06-02 14:12:23 -07:00