Summary:
A FIFO compaction picker test is accidentally testing against an instance of level compaction picker.
Closes https://github.com/facebook/rocksdb/pull/2641
Differential Revision: D5495390
Pulled By: sagar0
fbshipit-source-id: 301962736f629b1c499570fb504cdbe66bacb46f
Summary:
The previous implementation of caching `file_size` index made no sense. It only remembered the original span of locked files starting from beginning of `file_size`. We should remember the index after all compactions that have been considered but rejected. This will reduce the work we do while holding the db mutex.
Closes https://github.com/facebook/rocksdb/pull/2624
Differential Revision: D5468152
Pulled By: ajkr
fbshipit-source-id: ab92a4bffe76f9f174d861bb5812b974d1013400
Summary:
This reverts the previous commit 1d7048c598, which broke the build.
Did a `git revert 1d7048c`.
Closes https://github.com/facebook/rocksdb/pull/2627
Differential Revision: D5476473
Pulled By: sagar0
fbshipit-source-id: 4756ff5c0dfc88c17eceb00e02c36176de728d06
Summary: This uses `clang-tidy` to comment out unused parameters (in functions, methods and lambdas) in fbcode. Cases that the tool failed to handle are fixed manually.
Reviewed By: igorsugak
Differential Revision: D5454343
fbshipit-source-id: 5dee339b4334e25e963891b519a5aa81fbf627b2
Summary:
This diff addresses two problems. Both problems cause us to miss scheduling desirable compactions. One side effect is compaction picking can spam logs, as there's no delay after failed attempts to pick compactions.
1. If a compaction pulled in a locked input-level file due to user-key overlap, we would not consider picking another file from the same input level.
2. If a compaction pulled in a locked output-level file due to user-key overlap, we would not consider picking any other compaction on any level.
The code changes are dependent, which is why I solved both problems in a single diff.
- Moved input-level `ExpandInputsToCleanCut` into the loop inside `PickFileToCompact`. This gives two benefits: (1) if it fails, we will try the next-largest file on the same input level; (2) we get the fully-expanded input-level key-range with which we can check for pending compactions in output level.
- Added another call to `ExpandInputsToCleanCut` inside `PickFileToCompact`'s to check for compaction conflicts in output level.
- Deleted call to `IsRangeInCompaction` in `PickFileToCompact`, as `ExpandInputsToCleanCut` also correctly handles the case where original output-level files (i.e., ones not pulled in due to user-key overlap) are pending compaction.
Closes https://github.com/facebook/rocksdb/pull/2615
Differential Revision: D5454643
Pulled By: ajkr
fbshipit-source-id: ea3fb5477d83e97148951af3fd4558d2039e9872
Summary:
also changed the `>` in the comparison against `level0_file_num_compaction_trigger` into a `>=` since exactly `level0_file_num_compaction_trigger` can trigger a compaction from L0.
Closes https://github.com/facebook/rocksdb/pull/2179
Differential Revision: D4915772
Pulled By: ajkr
fbshipit-source-id: e38fec6253de6f9a40e61734615c6670d84038aa
Summary:
First cut for early review; there are few conceptual points to answer and some code structure issues.
For conceptual points -
- restriction-wise, we're going to disallow ingest_behind if (use_seqno_zero_out=true || disable_auto_compaction=false), the user is responsible to properly open and close DB with required params
- we wanted to ingest into reserved bottom most level. Should we fail fast if bottom level isn't empty, or should we attempt to ingest if file fits there key-ranges-wise?
- Modifying AssignLevelForIngestedFile seems the place we we'd handle that.
On code structure - going to refactor GenerateAndAddExternalFile call in the test class to allow passing instance of IngestionOptions, that's just going to incur lots of changes at callsites.
Closes https://github.com/facebook/rocksdb/pull/2144
Differential Revision: D4873732
Pulled By: lightmark
fbshipit-source-id: 81cb698106b68ef8797f564453651d50900e153a
Summary:
Changed dynamic leveling to stop setting the base level's size bound below `max_bytes_for_level_base`.
Behavior for config where `max_bytes_for_level_base == level0_file_num_compaction_trigger * write_buffer_size` and same amount of data in L0 and base-level:
- Before #2027, compaction scoring would favor base-level due to dividing by size smaller than `max_bytes_for_level_base`.
- After #2027, L0 and Lbase get equal scores. The disadvantage is L0 is often compacted before reaching the num files trigger since `write_buffer_size` can be bigger than the dynamically chosen base-level size. This increases write-amp.
- After this diff, L0 and Lbase still get equal scores. Now it takes `level0_file_num_compaction_trigger` files of size `write_buffer_size` to trigger L0 compaction by size, fixing the write-amp problem above.
Closes https://github.com/facebook/rocksdb/pull/2123
Differential Revision: D4861570
Pulled By: ajkr
fbshipit-source-id: 467ddef56ed1f647c14d86bb018bcb044c39b964
Summary:
1. Move universal compaction picker to separate files compaction_picker_universal.cc and compaction_picker_universal.h.
2. Rename some functions to make the code easier to understand.
3. Move leveled compaction picking code to a dedicated class, so that we we don't need to pass some common variable around when calling functions. It also allowed us to break down LevelCompactionPicker::PickCompaction() to smaller functions.
Closes https://github.com/facebook/rocksdb/pull/2100
Differential Revision: D4845948
Pulled By: siying
fbshipit-source-id: efa0ab4
Summary:
Level-based L0->L0 compaction operates on spans of files that aren't currently being compacted. It reduces the number of L0 files, thus making write stall conditions harder to reach.
- L0->L0 is triggered when base level is unavailable due to pending compactions
- L0->L0 always outputs one file of at most `max_level0_burst_file_size` bytes.
- Subcompactions are disabled for L0->L0 since we want to output one file.
- Input files are chosen as the longest span of available files that will fit within the size limit. This minimizes number of files in L0.
Closes https://github.com/facebook/rocksdb/pull/2027
Differential Revision: D4760318
Pulled By: ajkr
fbshipit-source-id: 9d07183
Summary:
reimplement the compaction expansion on lower level.
Considering such a case:
input level file: 1[B E] 2[F G] 3[H I] 4 [J M]
output level file: 5[A C] 6[D K] 7[L O]
If we initially pick file 2, now we will compact file 2 and 6. But we can safely compact 2, 3 and 6 without expanding the output level.
The previous code is messy and wrong.
In this diff, I first determine the input range [a, b], and output range [c, d],
then we get the range [e,f] = [min(a, c), max(b, d] and put all eligible clean-cut files within [e, f] into this compaction.
**Note: clean-cut means the files don't have the same user key on the boundaries of some files that are not chosen in this compaction**.
Closes https://github.com/facebook/rocksdb/pull/1760
Differential Revision: D4395564
Pulled By: lightmark
fbshipit-source-id: 2dc2c5c
Summary:
IsTrivialMove returns true if no input file overlaps with output_level+1 with more than max_compaction_bytes_ bytes.
Closes https://github.com/facebook/rocksdb/pull/1619
Differential Revision: D4278338
Pulled By: yiwu-arbug
fbshipit-source-id: 994c001
Summary:
The previous fix of reappearing of a deleted row 0ce258f9b3 missed a corner case, which can be reproduced using test CompactionPickerTest.OverlappingUserKeys7. Consider such an example:
input level file: 1[B E] 2[F H]
output level file: 3[A C] 4[D I] 5[I K]
First file 2 is picked, which overlaps to file 4. 4 expands to 5. Now the all range is [D K] with 2 output level files. When we try to expand that, [D K] overlaps with file 1 and 2 in the input level, and 1 and 2 overlaps with 3 and 4 in the output level. So we end up with picking 3 and 4 in the output level. Without expanding, it also has 2 files, so we determine the output level doesn't change, although they are the different two files.
The fix is to expand the output level files after we picked 3 and 4. In that case, there will be three output level files so we will abort the expanding.
I also added two unit tests related to marked_for_compaction and being_compacted. They have been passing though.
Test Plan: Run the new unit test, as well as all other tests.
Reviewers: andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yoshinorim, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65373
Summary:
We always run consistency checks when compiling in debug mode
allow users to set Options::force_consistency_checks to true to be able to run such checks even when compiling in release mode
Test Plan:
make check -j64
make release
Reviewers: lightmark, sdong, yiwu
Reviewed By: yiwu
Subscribers: hermanlee4, andrewkr, yoshinorim, jkedgar, dhruba
Differential Revision: https://reviews.facebook.net/D64701
Summary:
* Change constructor of MutableCFOptions to depends only on ColumnFamilyOptions.
* Move `max_subcompactions`, `compaction_options_fifo` and `compaction_pri` to ImmutableCFOptions to make it clear that they are immutable.
Test Plan: existing unit tests.
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63945
Summary: To reduce number of options, merge source_compaction_factor, max_grandparent_overlap_bytes and expanded_compaction_factor into max_compaction_bytes.
Test Plan: Add two new unit tests. Run all existing tests, including jtest.
Reviewers: yhchiang, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59829
Summary: We may wrongly drop delete operation if we pick a file with the entry to be delete, the put entry of the same user key is in the next file in the level, and the next file is not picked. We expand compaction inputs for output level too.
Test Plan: Add unit tests that reproduct the bug of dropping delete entry. Change compaction_picker_test to assert the new behavior.
Reviewers: IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61173
Summary: Make CompactionOptionsFIFO a part of mutable_cf_options
Test Plan: UT
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, lgalanis, dhruba
Differential Revision: https://reviews.facebook.net/D58653
Summary: Currently we estimate bytes needed for compaction by assuming fanout value to be level multiplier. It overestimates when size of a level exceeds the target by large. We estimate by the ratio of actual sizes in levels instead.
Test Plan: Fix existing test cases and add a new one.
Reviewers: IslamAbdelRahman, igor, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57789
Summary:
Changing several option defaults:
options.max_open_files changes from 5000 to -1
options.base_background_compactions changes from max_background_compactions to 1
options.wal_recovery_mode changes from kTolerateCorruptedTailRecords to kTolerateCorruptedTailRecords
options.compaction_pri changes from kByCompensatedSize to kByCompensatedSize
Test Plan: Write unit tests to see OldDefaults() works as expected.
Reviewers: IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: MarkCallaghan, yiwu, kradhakrishnan, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56427
Summary: Change some RocksDB default options to make it more friendly to server workloads.
Test Plan: Run all existing tests
Reviewers: yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: sumeet, muthu, benj, MarkCallaghan, igor, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55941
Summary:
Add a new compaction priority as following:
For every file, we calculate total size of files overalapping with the file in the next level, over the file's size itself. The file with smallest ratio will be picked first.
My "db_bench --fillrandom" shows about 5% less compaction than kOldestSmallestSeqFirst if --hard_pending_compaction_bytes_limit value to keep LSM tree in shape. If not limiting hard_pending_compaction_bytes_limit, improvement is only 1% or 2%.
Test Plan: Add a unit test
Reviewers: andrewkr, kradhakrishnan, anthony, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54075
Summary: When L0->L1 is pending, there may be one L1->L2 compaction going on which prevents the L0->L1 compaction from happening. If L1 needs more data to be moved to L2, then we may continue scheduling more L1->L2 compactions. The end result may be that L0->L1 compaction will not happen until L1 size drops to below target size. We can reduce the stalling because of number of L0 files by stopping schedling new L1->L2 compaction when L0's score is higher than L1.
Test Plan: Run all existing tests.
Reviewers: yhchiang, MarkCallaghan, rven, anthony, IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52401
Summary:
The function GetBoundaryKeys() returns the smallest key from the first file and largest key from the last file. This is good for any level >0, but it's not correct for level 0. In level 0, files can overlap, so we need to check all files for boundary keys. This bug can cause wrong value for bottommost_level in compaction (value of true, although correct is false), which means we can set sequence numbers to 0 even if the key is not the oldest one in the database.
Herman reported corruption while testing MyRocks. Fortunately, the patch that added the bug was not released yet.
Test Plan: added a new test to compaction_picker_test.
Reviewers: hermanlee4, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48201
Summary: Test cases for IsBottommostLevel function create FileMetaData objects which were not getting deleted in the destructor.
Test Plan: Valgrind check on compaction_picker_test
Reviewers: yhchiang, igor, sdong
Subscribers: rven, kradhakrishnan, IslamAbdelRahman, dhruba, anthony
Differential Revision: https://reviews.facebook.net/D47463
Summary:
Add options.compaction_pri, which specifies the policy about which file to compact first.
kCompactionPriByLargestSeq will compact oldest files first.
Verified the behavior in db_bench but did not write unit tests yet. Also need to make it settable through option string and dynamically changeable.
Test Plan: Will write unit tests
Reviewers: igor, rven, anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, MarkCallaghan
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D45951
Summary: The diff modifies the condition checked to determine the bottommost level during compaction. Previously, absence of files in higher levels alone was used as the condition. Now, the function additionally evaluates if the higher levels have files which have non-overlapping key ranges, then the level can be safely considered as the bottommost level.
Test Plan: Unit test cases added and passing. However, unit tests of universal compaction are failing as a result of the changes made in this diff. Need to understand why that is happening.
Reviewers: igor
Subscribers: dhruba, sdong, lgalanis, meyering
Differential Revision: https://reviews.facebook.net/D46473
Summary:
Add a counter of estimated bytes the DB needs to compact for all the compactions to finish. Expose it as a DB Property.
In the future, we can use threshold of this counter to replace soft rate limit and hard rate limit. A single threshold of estimated compaction debt in bytes will be easier for users to reason about when should slow down and stopping than more abstract soft and hard rate limits.
Test Plan: Add unit tests
Reviewers: IslamAbdelRahman, yhchiang, rven, kradhakrishnan, anthony, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D44205
Summary: Remove universal and fifo compaction tests from ROCKSDB_LITE since they are not supported
Test Plan: compaction_picker_test
Reviewers: sdong, igor, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D42129
Summary: This change enables trivial move if all the input files are non onverlapping while doing Universal Compaction.
Test Plan: ./compaction_picker_test and db_test ran successfully with the new testcases.
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D40875
Summary:
This patch adds three test cases for ExpandWhileOverlapping()
to the compaction_picker_test test suite.
ExpandWhileOverlapping() only has an effect if the comparison
function for the internal keys allows for overlapping user
keys in different SST files on the same level. Thus, this
patch adds a comparator based on sequence numbers to
compaction_picker_test for the new test cases.
Test Plan:
- make compaction_picker_test && ./compaction_picker_test
-> All tests pass
- Replace body of ExpandWhileOverlapping() with `return true`
-> Compile and run ./compaction_picker_test as before
-> New tests fail
Reviewers: sdong, yhchiang, rven, anthony, IslamAbdelRahman, kradhakrishnan, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41277
Summary:
This diff updates the logic of how we do trivial move, now trivial move can run on any number of files in input level as long as they are not overlapping
The conditions for trivial move have been updated
Introduced conditions:
- Trivial move cannot happen if we have a compaction filter (except if the compaction is not manual)
- Input level files cannot be overlapping
Removed conditions:
- Trivial move only run when the compaction is not manual
- Input level should can contain only 1 file
More context on what tests failed because of Trivial move
```
DBTest.CompactionsGenerateMultipleFiles
This test is expecting compaction on a file in L0 to generate multiple files in L1, this test will fail with trivial move because we end up with one file in L1
```
```
DBTest.NoSpaceCompactRange
This test expect compaction to fail when we force environment to report running out of space, of course this is not valid in trivial move situation
because trivial move does not need any extra space, and did not check for that
```
```
DBTest.DropWrites
Similar to DBTest.NoSpaceCompactRange
```
```
DBTest.DeleteObsoleteFilesPendingOutputs
This test expect that a file in L2 is deleted after it's moved to L3, this is not valid with trivial move because although the file was moved it is now used by L3
```
```
CuckooTableDBTest.CompactionIntoMultipleFiles
Same as DBTest.CompactionsGenerateMultipleFiles
```
This diff is based on a work by @sdong https://reviews.facebook.net/D34149
Test Plan: make -j64 check
Reviewers: rven, sdong, igor
Reviewed By: igor
Subscribers: yhchiang, ott, march, dhruba, sdong
Differential Revision: https://reviews.facebook.net/D34797
Summary: This caused a crash of our MongoDB + RocksDB instance. PickCompactionBySize() sets its own parent_index. We never reset this parent_index when picking PickFilesMarkedForCompactionExperimental(). So we might end up doing SetupOtherInputs() with parent_index that was set by PickCompactionBySize, although we're using compaction calculated using PickFilesMarkedForCompactionExperimental.
Test Plan: Added a unit test that fails with assertion on master.
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38337
Summary:
Some Mongo+Rocks datasets in Parse's environment are not doing compactions very frequently. During the quiet period (with no IO), we'd like to schedule compactions so that our reads become faster. Also, aggressively compacting during quiet periods helps when write bursts happen. In addition, we also want to compact files that are containing deleted key ranges (like old oplog keys).
All of this is currently not possible with CompactRange() because it's single-threaded and blocks all other compactions from happening. Running CompactRange() risks an issue of blocking writes because we generate too much Level 0 files before the compaction is over. Stopping writes is very dangerous because they hold transaction locks. We tried running manual compaction once on Mongo+Rocks and everything fell apart.
MarkForCompaction() solves all of those problems. This is very light-weight manual compaction. It is lower priority than automatic compactions, which means it shouldn't interfere with background process keeping the LSM tree clean. However, if no automatic compactions need to be run (or we have extra background threads available), we will start compacting files that are marked for compaction.
Test Plan: added a new unit test
Reviewers: yhchiang, rven, MarkCallaghan, sdong
Reviewed By: sdong
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37083
Summary:
The goal of this diff is to make Compaction class easier to use. This should also make new compaction algorithms easier to write (like CompactFiles from @yhchiang and dynamic leveled and multi-leveled universal from @sdong).
Here are couple of things demonstrating that Compaction class is hard to use:
1. we have two constructors of Compaction class
2. there's this thing called grandparents_, but it appears to only be setup for leveled compaction and not compactfiles
3. it's easy to introduce a subtle and dangerous bug like this: D36225
4. SetupBottomMostLevel() is hard to understand and it shouldn't be. See this comment: afbafeaeae/db/compaction.cc (L236-L241). It also made it harder for @yhchiang to write CompactFiles, as evidenced by this: afbafeaeae/db/compaction_picker.cc (L204-L210)
The problem is that we create Compaction object, which holds a lot of state, and then pass it around to some functions. After those functions are done mutating, then we call couple of functions on Compaction object, like SetupBottommostLevel() and MarkFilesBeingCompacted(). It is very hard to see what's happening with all that Compaction's state while it's travelling across different functions. If you're writing a new PickCompaction() function you need to try really hard to understand what are all the functions you need to run on Compaction object and what state you need to setup.
My proposed solution is to make important parts of Compaction immutable after construction. PickCompaction() should calculate compaction inputs and then pass them onto Compaction object once they are finalized. That makes it easy to create a new compaction -- just provide all the parameters to the constructor and you're done. No need to call confusing functions after you created your object.
This diff doesn't fully achieve that goal, but it comes pretty close. Here are some of the changes:
* have one Compaction constructor instead of two.
* inputs_ is constant after construction
* MarkFilesBeingCompacted() is now private to Compaction class and automatically called on construction/destruction.
* SetupBottommostLevel() is gone. Compaction figures it out on its own based on the input.
* CompactionPicker's functions are not passing around Compaction object anymore. They are only passing around the state that they need.
Test Plan:
make check
make asan_check
make valgrind_check
Reviewers: rven, anthony, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: sdong, yhchiang, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36687
Summary:
Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different.
In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest.
There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides.
```lang=bash
% cat ~/transform
#!/bin/sh
files=$(git ls-files '*test\.cc')
for file in $files
do
if grep -q "rocksdb::test::RunAllTests()" $file
then
if grep -Eq '^class \w+Test {' $file
then
perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file
perl -pi -e 's/^(TEST)/${1}_F/g' $file
fi
perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file
perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file
fi
done
% sh ~/transform
% make format
```
Second iteration of this diff contains only scripted changes.
Third iteration contains manual changes to fix last errors and make it compilable.
Test Plan:
Build and notice no errors.
```lang=bash
% USE_CLANG=1 make check -j55
```
Tests are still testing.
Reviewers: meyering, sdong, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35157
Summary:
When having fixed max_bytes_for_level_base, the ratio of size of largest level and the second one can range from 0 to the multiplier. This makes LSM tree frequently irregular and unpredictable. It can also cause poor space amplification in some cases.
In this improvement (proposed by Igor Kabiljo), we introduce a parameter option.level_compaction_use_dynamic_max_bytes. When turning it on, RocksDB is free to pick a level base in the range of (options.max_bytes_for_level_base/options.max_bytes_for_level_multiplier, options.max_bytes_for_level_base] so that real level ratios are close to options.max_bytes_for_level_multiplier.
Test Plan: New unit tests and pass tests suites including valgrind.
Reviewers: MarkCallaghan, rven, yhchiang, igor, ikabiljo
Reviewed By: ikabiljo
Subscribers: yoshinorim, ikabiljo, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31437
Summary: Added requirement that ComputeCompactionScore() be executed in mutex, since it's accessing being_compacted bool, which can be mutated by other threads. Also added more comments about thread safety of FileMetaData, since it was a bit confusing. However, it seems that FileMetaData doesn't have data races (except being_compacted)
Test Plan: Ran 100 ConvertCompactionStyle tests with thread sanitizer. On master -- some failures. With this patch -- none.
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32283
Summary:
Allow Level-style compaction to place files in different paths
This diff provides the code for task 4854591. We now support level-compaction
to place files in different paths by specifying them in db_paths along with
the minimum level for files to store in that path.
Test Plan: ManualLevelCompactionOutputPathId in db_test.cc
Reviewers: yhchiang, MarkCallaghan, dhruba, yoshinorim, sdong
Reviewed By: sdong
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29799
Summary:
In some environment such as android, the c++ library does not have
std::to_string. This path adds rocksdb::ToString(), which wraps std::to_string
when std::to_string is not available, and implements std::to_string
in the other case.
Test Plan:
make dbg -j32
./db_test
make clean
make dbg OPT=-DOS_ANDROID -j32
./db_test
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29181
Summary: As a short-term fix, let's go back to previous way of calculating NeedsCompaction(). SIGSEGV happens because NeedsCompaction() can happen before super_version (and thus MutableCFOptions) is initialized.
Test Plan: make check
Reviewers: ljin, sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28875
Summary:
Move NeedsCompaction() from VersionStorageInfo to CompactionPicker
to allow different compaction strategy to have their own way to
determine whether doing compaction is necessary.
When compaction style is set to kCompactionStyleNone, then
NeedsCompaction() will always return false.
Test Plan:
export ROCKSDB_TESTS=Compact
./db_test
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28719
Summary:
We need to turn on -Wshorten-64-to-32 for mobile. See D1671432 (internal phabricator) for details.
This diff turns on the warning flag and fixes all the errors. There were also some interesting errors that I might call bugs, especially in plain table. Going forward, I think it makes sense to have this flag turned on and be very very careful when converting 64-bit to 32-bit variables.
Test Plan: compiles
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: yhchiang
Subscribers: bobbaldwin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28689
