Summary:
PreReleaseCallback meant to be called before the writes are visible to the readers. Since the sequence number is known after the WAL write, there is no reason to delay calling PreReleaseCallback to after the memtable write, which would complicates the reader's logic in presence of our memtable writes that are made visible by the other write thread.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5015
Differential Revision: D14221670
Pulled By: maysamyabandeh
fbshipit-source-id: a504dd665cf923226d7af09cc8e9c7739a25edc6
Summary:
When two_write_queues is enabled we call ::AddPrepared only from the main queue, which writes to both WAL and memtable, and call ::AddCommitted from the 2nd queue, which writes only to WAL. This simplifies the logic by avoiding concurrency between AddPrepared and also between AddCommitted. The patch fixes one case that did not conform with the rule above. This would allow future refactoring. For example AdvaneMaxEvictedSeq, which is invoked by AddCommitted, can be simplified by assuming lack of concurrent calls to it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5014
Differential Revision: D14210493
Pulled By: maysamyabandeh
fbshipit-source-id: 6db5ba372a294a568a14caa010576460917a4eab
Summary:
`DefaultEnvTest.incBackgroundThreadsIfNeeded` jtest should assert that the number of threads is greater than or equal to the minimum number of threads.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5021
Differential Revision: D14268311
Pulled By: sagar0
fbshipit-source-id: 01fb32b5b3ce636451d162fa1a2bbc5bd1974682
Summary:
Replace the integers used for setting and querying the various
flags in LRUHandle with enum values to improve readability.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5024
Differential Revision: D14263429
Pulled By: ltamasi
fbshipit-source-id: b1b9ba95635265f122c2b40da73850eaac18227a
Summary:
Statistics cost too much CPU for some use cases. Add two stats levels
so that people can choose to skip two types of expensive stats, timers and
histograms.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5027
Differential Revision: D14252765
Pulled By: siying
fbshipit-source-id: 75ecec9eaa44c06118229df4f80c366115346592
Summary:
The read path includes a callback function, ReadCallback, which would eventually calls IsInSnapshot to figure if a particular seq is in the reading snapshot or not. This callback is virtual, which adds the cost of multiple virtual function call to each read. The first few checks in IsInSnapshot, however, are quite trivial and take care of majority of the cases. The patch moves those to a non-virtual function in the the parent class, ReadCallback, to lower the virtual callback cost.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5018
Differential Revision: D14226562
Pulled By: maysamyabandeh
fbshipit-source-id: 6feed5b34f3b082e52092c5ef143e29b49c46b44
Summary:
This is my latest round of changes to add missing items to RocksJava. More to come in future PRs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4833
Differential Revision: D14152266
Pulled By: sagar0
fbshipit-source-id: d6cff67e26da06c131491b5cf6911a8cd0db0775
Summary:
When closing a BlobDB, it only waits for background tasks
to finish as the last thing, but the background task may access
some variables that are destroyed. The fix is to introduce a
shutdown function in the timer queue and call the function as
the first thing when destorying BlobDB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5005
Differential Revision: D14170342
Pulled By: siying
fbshipit-source-id: 081e6a2d99b9765d5956cf6cdfc290c07270c233
Summary:
This PR adds public `GetStatsHistory` API to retrieve stats history in the form of an std map. The key of the map is the timestamp in microseconds when the stats snapshot is taken, the value is another std map from stats name to stats value (stored in std string). Two DBOptions are introduced: `stats_persist_period_sec` (default 10 minutes) controls the intervals between two snapshots are taken; `max_stats_history_count` (default 10) controls the max number of history snapshots to keep in memory. RocksDB will stop collecting stats snapshots if `stats_persist_period_sec` is set to 0.
(This PR is the in-memory part of https://github.com/facebook/rocksdb/pull/4535)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4748
Differential Revision: D13961471
Pulled By: miasantreble
fbshipit-source-id: ac836d401ecb84ea92216bf9966f969dedf4ad04
Summary:
Currently the transaction stress tests use thread id as the seed. Since the thread ids are likely to be the same across multiple runs, the seed is thus going to be the same. The patch includes time in calculating the seed to help covering a very different part of state space in each run of the stress tests. To be able to reproduce the bug in case the stress tests failed, it also prints out the time that was used to calculate the seed value.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5004
Differential Revision: D14144356
Pulled By: maysamyabandeh
fbshipit-source-id: 728ed522f550fc8b4f5f9f373259c05fe9a54556
Summary:
The transaction stress tests, stress a high concurrency scenario. In WritePrepared/WriteUnPrepared we need to also stress the scenarios where an inserting/reading transaction is very slow. This would stress the corner cases that the caching is not sufficient and other slower data structures are engaged. To emulate such cases we make use of slow inserter/verifier threads and also reduce the size of cache data structures.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4974
Differential Revision: D14143070
Pulled By: maysamyabandeh
fbshipit-source-id: 81eb674678faf9fae0f654cd60ebcc74e26aeee7
Summary:
max_evicted_seq_ could be updated in the middle of the read in ::IsInSnapshot. The code to be correct in presence of this update would be complicated. The patch simplifies it by checking the value of max_evicted_seq_ before and after looking into commit_cache_ and retries in the unlucky case that it was changed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4955
Differential Revision: D13999556
Pulled By: maysamyabandeh
fbshipit-source-id: 7a1bdfa95ea8b5d8d73ddff3263ed31d7297b39c
Summary:
Currently crash test covers cases with and without atomic flush, but takes too
long to finish. Therefore it may be a better idea to put crash test with atomic
flush in a separate set of tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4945
Differential Revision: D13947548
Pulled By: riversand963
fbshipit-source-id: 177c6de865290fd650b0103408339eaa3f801d8c
Summary:
MyRocks calls `GetForUpdate` on `INSERT`, for unique key check, and in almost all cases GetForUpdate returns empty result. For such cases, whole key bloom filter is helpful.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4985
Differential Revision: D14118257
Pulled By: miasantreble
fbshipit-source-id: d35cb7109c62fd5ad541a26968e3a3e16d3e85ea
Summary:
The info log header feature never worked well, because log level Header was not
translated to Logger::LogHeader() call. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4980
Differential Revision: D14087283
Pulled By: siying
fbshipit-source-id: 7e7d03ce35fa8d13d4ee549f46f7326f7bc0006d
Summary:
Right now when a flush is triggered, the memory consumption is logged but data size is not.
It's useful to log both when we debug unexpected small flushed file size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4979
Differential Revision: D14071979
Pulled By: siying
fbshipit-source-id: 0cd60449c5205eb00e0fbc299084418f609904ed
Summary:
LITE mode has EventListener to be an empty class. However in db_bench,
it is used. When "override" is added to the functions, the build breaks. Fix it
by keeping the listener empty in LITE mode.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4989
Differential Revision: D14108132
Pulled By: siying
fbshipit-source-id: 80121aab35b1120e502b37b782301dd700692697
Summary:
We introduced ttl option in CompactionOptionsFIFO when ttl-based file
deletion (compaction) was supported only as part of FIFO Compaction. But
with the extension of ttl semantics even to Level compaction,
CompactionOptionsFIFO.ttl can now be deprecated. Instead we will start
using ColumnFamilyOptions.ttl for FIFO compaction as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4965
Differential Revision: D14072960
Pulled By: sagar0
fbshipit-source-id: c98cc2ae695a28136295787cd88d36a220fc219e
Summary:
If `CompressionOptions::max_dict_bytes` and/or `CompressionOptions::zstd_max_train_bytes` are set, `SstFileWriter` will now generate files respecting those options.
I refactored the logic a bit for deciding when to use dictionary compression. Previously we plumbed `is_bottommost_level` down to the table builder and used that. However it was kind of confusing in `SstFileWriter`'s context since we don't know what level the file will be ingested to. Instead, now the higher-level callers (e.g., flush, compaction, file writer) are responsible for building the right `CompressionOptions` to give the table builder.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4978
Differential Revision: D14060763
Pulled By: ajkr
fbshipit-source-id: dc802c327896df2b319dc162d6acc82b9cdb452a
Summary:
if an operation just involves a single column family, then we do
not have to set the kInAtomicGroup tag when writing to MANIFEST. This change
can fix a compatibility test failure, i.e. 5.15 and earlier cannot recognize
kInAtomicGroup tag.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4981
Differential Revision: D14072687
Pulled By: riversand963
fbshipit-source-id: 46b0c61e399f16c6b7169de0b33430d0ed90d6d4
Summary:
We should strip `-DZSTD` to prevent ZSTD from being used in the no compression tests, similarly to how we prevent all other compression libraries from being used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4982
Differential Revision: D14075349
Pulled By: ajkr
fbshipit-source-id: 8bd861516cf28a568c2b701ad33d0bb658db93b2
Summary:
as title. For people who continue to need Lua compaction filter, you
can copy the include/rocksdb/utilities/rocks_lua/lua_compaction_filter.h and
utilities/lua/rocks_lua_compaction_filter.cc to your own codebase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4971
Differential Revision: D14047468
Pulled By: riversand963
fbshipit-source-id: 9ad1a6484a7c94e478f1e108127a3184e4069f70
Summary:
Make file ingestion atomic.
as title.
Ingesting external SST files into multiple column families should be atomic. If
a crash occurs and db reopens, either all column families have successfully
ingested the files before the crash, or non of the ingestions have any effect
on the state of the db.
Also add unit tests for atomic ingestion.
Note that the unit test here does not cover the case of incomplete atomic group
in the MANIFEST, which is covered in VersionSetTest already.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4895
Differential Revision: D13718245
Pulled By: riversand963
fbshipit-source-id: 7df97cc483af73ad44dd6993008f99b083852198
Summary:
Previously, stats were logged in warning level. This was done in that way because
people reported that it wasn't logged in MyRocks. However, later we learned that it turns
out to be due to a bug in MyRocks, which is fixed in
79bb705e74
Now we revert the stats logging to INFO level, so that it doesn't pollute the warning
level logging.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4977
Differential Revision: D14058485
Pulled By: siying
fbshipit-source-id: 19fab323c19d9bc88184287f209551f9a77ca0e6
Summary:
In `DBImpl::AtomicFlushMemTablesToOutputFiles`, we need to call fsync only once
on the same data directory. If two column families share a common directory for
their data, we call fsync only once.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4817
Differential Revision: D13543689
Pulled By: riversand963
fbshipit-source-id: 4701d77c96a47802fbf6cb9f3337ee65d46b95f5
Summary:
Our previous approach was to train one compression dictionary per compaction, using the first output SST to train a dictionary, and then applying it on subsequent SSTs in the same compaction. While this was great for minimizing CPU/memory/I/O overhead, it did not achieve good compression ratios in practice. In our most promising potential use case, moderate reductions in a dictionary's scope make a major difference on compression ratio.
So, this PR changes compression dictionary to be scoped per-SST. It accepts the tradeoff during table building to use more memory and CPU. Important changes include:
- The `BlockBasedTableBuilder` has a new state when dictionary compression is in-use: `kBuffered`. In that state it accumulates uncompressed data in-memory whenever `Add` is called.
- After accumulating target file size bytes or calling `BlockBasedTableBuilder::Finish`, a `BlockBasedTableBuilder` moves to the `kUnbuffered` state. The transition (`EnterUnbuffered()`) involves sampling the buffered data, training a dictionary, and compressing/writing out all buffered data. In the `kUnbuffered` state, a `BlockBasedTableBuilder` behaves the same as before -- blocks are compressed/written out as soon as they fill up.
- Samples are now whole uncompressed data blocks, except the final sample may be a partial data block so we don't breach the user's configured `max_dict_bytes` or `zstd_max_train_bytes`. The dictionary trainer is supposed to work better when we pass it real units of compression. Previously we were passing 64-byte KV samples which was not realistic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4952
Differential Revision: D13967980
Pulled By: ajkr
fbshipit-source-id: 82bea6f7537e1529c7a1a4cdee84585f5949300f
Summary:
Enhance ::Insert and ::Verify test functions to add artificial delay between prepare and commit, and take snapshot and reads respectively. A future PR will make use of these to improve stress tests to test against long-running transactions as well as long-running backup jobs. Also randomly sets set_snapshot to false for inserters to skip setting the snapshot in the initialization phase and let the snapshot be taken later explicitly.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4970
Differential Revision: D14031342
Pulled By: maysamyabandeh
fbshipit-source-id: b52b453751f0b25b81b23c48892bc1d152464cab
Summary:
If IsInSnapshot(seq2, snapshot) determines that the snapshot is released, the future queries IsInSnapshot(seq1, snapshot) could still return a definitive answer of true if for example seq1 is too old that is determined visible in all snapshots. This violates a recently added assert statement to compaction iterator. The patch relaxes the assert.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4969
Differential Revision: D14030998
Pulled By: maysamyabandeh
fbshipit-source-id: 6db53db0e37d0a20e8997ef2c1004b8627614ab9
Summary:
Previously `finalize_and_sanitize` function was always zeroing out `compression_zstd_max_train_bytes`. It was only supposed to do that when non-ZSTD compression was used. But since `--compression_type` was an unknown argument (i.e., one that `db_crashtest.py` does not recognize and blindly forwards to `db_stress`), `finalize_and_sanitize` could not tell whether ZSTD was used. This PR fixes it simply by making `--compression_type` a known argument with snappy as default (same as `db_stress`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4957
Differential Revision: D13994302
Pulled By: ajkr
fbshipit-source-id: 1b0baea7331397822830970d3698642eb7a7df65
Summary:
WritePreparedTransactionDB operates with more options which should not be configurable to avoid complicating it for the users. For testing purposes however we need to change the default value of this parameters. This patch makes these parameters private fields in TransactionDBOptions so that the existing ::Open API could use them seamlessly without however exposing them to the users.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4966
Differential Revision: D14015986
Pulled By: maysamyabandeh
fbshipit-source-id: 13037efa7dfdd6f73ec7a19414b66571e044c633
Summary:
Always enable properties block checksum verification for block-based table. For external SST file ingested with 'write_global_seqno==true', we use 'DecodeEntrySlow' to parse its blocks' contents so that the process will not die upon failing the assertion possibly caused by corruption.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4956
Differential Revision: D14012741
Pulled By: riversand963
fbshipit-source-id: 8b766e6f54b36f8f9e074c0e19e0926ec3cce186
Summary:
Implement trace sampling to allow user to specify the sampling frequency, i.e. save one per how many requests, so that a user does not need to log all if he/she is interested in only a sampled set.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4963
Differential Revision: D14011190
Pulled By: tang-jianfeng
fbshipit-source-id: 078b631d9319b67cb089dd2c30e21d0df8dc406a
Summary:
ValidateSnapshot checks if another txn has committed a value to about-to-be-locked key since a particular snapshot. It applies an optimization of looking into only the memtable if snapshot seq is larger than the earliest seq in the memtables. With a long-running txn in WritePrepared, the prepared value might be flushed out to the disk and yet it commits after the snapshot, which breaks this optimization. The patch fixes that by disabling this optimization when the min_uncomitted seq at the time the snapshot was taken is lower than earliest seq in the memtables.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4961
Differential Revision: D14009947
Pulled By: maysamyabandeh
fbshipit-source-id: 1d11679950326f7c4094b433e6b821b729f08850
Summary:
It would avoid bugs if the reused PinnableSlice is not actually reassigned and yet the programmer makes conclusions based on the size of the Slice.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4962
Differential Revision: D14012710
Pulled By: maysamyabandeh
fbshipit-source-id: 23f4e173386b5461fd5650f44cde470805f4e816
Summary:
We want to reserve some right that some extra information added manifest
in the future can be forward compatible by previous versions. Now we create a
place holder for that. A bit in tag is added to indicate that a field can be
safely ignored.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4960
Differential Revision: D14000484
Pulled By: siying
fbshipit-source-id: cbf5bad3f9d5ec798f789806f244d1c20d3b66d6
Summary:
We found that the behavior of CompactionFilter::IgnoreSnapshots() = false isn't
what we have expected. We thought that snapshot will always be preserved.
However, we just realized that, if no snapshot is created while compaction
starts, and a snapshot is created after that, the data seen from the snapshot
can successfully be dropped by the compaction. This creates a strange behavior
to the feature, which is hard to explain. Like what is documented in code
comment, this feature is not very useful with snapshot anyway. The decision
is to deprecate the feature.
We keep the function to avoid to break users code. However, we will fail
compactions if false is returned.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4954
Differential Revision: D13981900
Pulled By: siying
fbshipit-source-id: 2db8c2c3865acd86a28dca625945d1481b1d1e36
Summary:
Cuckoo Hash is less useful than we initially expected. Remove it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4953
Differential Revision: D13979264
Pulled By: siying
fbshipit-source-id: 2a60afdaa989f045357398b43a1cc5d46f4492ed
Summary:
Commit of delayed prepared has two non-atomic steps: add to commit cache, remove from delayed_prepared_. Similarly in ::IsInSnapshot we read from commit cache first and then look into delayed_prepared_. Due to non-atomicity thus the reader might not find the
prep_seq that is just committed neither in commit cache nor in delayed_prepared_. To fix that i)
we check if there was any delayed prepared BEFORE looking into commit
cache, ii) if there was, we complete the search steps to be these: i)
commit cache, ii) delayed prepared, commit cache again. In this way if
the first query to commit cache missed the commit, the 2nd will catch it. The cost of the redundant read from commit cache is paid only if delayed_prepared_ is nonempty which should be a very rare scenario.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4947
Differential Revision: D13952754
Pulled By: maysamyabandeh
fbshipit-source-id: 8f47826b13f8ce154398d842028342423f4ca2b2
Summary:
4985a9f73b (diff-e5276985b26a0551957144f4420a594bR511)
changes the meaning of latency reporting from running time per query, to elapse_time / #ops, without providing a reason why.
Considering that this is a counter-intuitive reporting, Reverting the change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4949
Differential Revision: D13964684
Pulled By: siying
fbshipit-source-id: d6304d3d4b5a802daa292302623c7dbca9a680bc
Summary:
This will fix the following build error:
> db/db_test.cc: In member function ‘virtual void rocksdb::DBTest_CompactFilesShouldTriggerAutoCompaction_Test::TestBody()’:
> db/db_test.cc:5462:8: error: ‘class rocksdb::DB’ has no member named ‘GetColumnFamilyMetaData’
> db_->GetColumnFamilyMetaData(db_->DefaultColumnFamily(), &cf_meta_data);
> db/db_test.cc:5490:8: error: ‘class rocksdb::DB’ has no member named ‘GetColumnFamilyMetaData’
> db_->GetColumnFamilyMetaData(db_->DefaultColumnFamily(), &cf_meta_data);
> db/db_test.cc:5499:8: error: ‘class rocksdb::DB’ has no member named ‘GetColumnFamilyMetaData’
> db_->GetColumnFamilyMetaData(db_->DefaultColumnFamily(), &cf_meta_data);
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4950
Differential Revision: D13965378
Pulled By: miasantreble
fbshipit-source-id: a975435476fe555b1cd9d5da263ee3da3acdea56
