Summary:
PlainTableReader now only allows mmap-mode. Add the support to non-mmap mode for more flexibility.
Refactor the codes to move all logic of reading data to PlainTableKeyDecoder, and consolidate the calls to Read() call and ReadVarint32() call. Implement the calls for both of mmap and non-mmap case seperately. For non-mmap mode, make copy of keys in several places when we need to move the buffer after reading the keys.
Test Plan: Add the mode of non-mmap case in plain_table_db_test. Run it in valgrind mode too.
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D47187
Summary:
This patch fixes#7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
Summary: Fix two constants in WaitFor() that multiply a value with 000 instead of 1000.
Test Plan: make clean all check
Reviewers: rven, anthony, yhchiang, aekmekji, sdong, MarkCallaghan, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47091
Summary. A change https://reviews.facebook.net/differential/diff/224721/
Has attempted to move common functionality out of platform dependent
code to a new facility called file_reader_writer.
This includes:
- perf counters
- Buffering
- RateLimiting
However, the change did not attempt to refactor Windows code.
To mitigate, we introduce new quering interfaces such as UseOSBuffer(),
GetRequiredBufferAlignment() and ReaderWriterForward()
for pure forwarding where required.
Introduce WritableFile got a new method Truncate(). This is to communicate
to the file as to how much data it has on close.
- When space is pre-allocated on Linux it is filled with zeros implicitly,
no such thing exist on Windows so we must truncate file on close.
- When operating in unbuffered mode the last page is filled with zeros but we still want to truncate.
Previously, Close() would take care of it but now buffer management is shifted to the wrappers and the file has
no idea about the file true size.
This means that Close() on the wrapper level must always include
Truncate() as well as wrapper __dtor should call Close() and
against double Close().
Move buffered/unbuffered write logic to the wrapper.
Utilize Aligned buffer class.
Adjust tests and implement Truncate() where necessary.
Come up with reasonable defaults for new virtual interfaces.
Forward calls for RandomAccessReadAhead class to avoid double
buffering and locking (double locking in unbuffered mode on WIndows).
Summary:
Now that the approach to parallelizing L0-L1 level-based
compactions by breaking the compaction job into subcompactions is
being extended to apply to universal compactions as well, the unit
tests need to account for this and run the universal compaction
tests with subcompactions both enabled and disabled.
Test Plan: make all && make check
Reviewers: sdong, igor, noetzli, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D45657
Summary: malloc_usable_size() gets a better estimation of memory usage. It is already used to calculate block cache memory usage. Use it in arena too.
Test Plan: Run all unit tests
Reviewers: anthony, kradhakrishnan, rven, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43317
Summary: Currently compaction inputs share the same file descriptor and table reader as other foreground threads. It makes fadvise works less predictable. Add options.new_table_reader_for_compaction_inputs to enforce to create a new file descriptor and new table reader for it.
Test Plan: Add the option.
Reviewers: rven, anthony, kradhakrishnan, IslamAbdelRahman, igor, yhchiang
Reviewed By: igor
Subscribers: igor, MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43311
Summary:
Add two unit tests for SyncWAL(). One makes sure SyncWAL() doesn't block writes in the other thread. Another one makes sure SyncWAL() doesn't wait ongoing writes to finish before being executed.
Create a new test file db_wal_test and move two WAL related tests from db_test to here.
Test Plan: Run the new tests
Reviewers: IslamAbdelRahman, rven, kradhakrishnan, kolmike, tnovak, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43605
Summary:
Subj. We really need this feature.
Previous diff D40899 has most of the changes to make this possible, this diff just adds the method.
Test Plan: `make check`, the new test fails without this diff; ran with ASAN, TSAN and valgrind.
Reviewers: igor, rven, IslamAbdelRahman, anthony, kradhakrishnan, tnovak, yhchiang, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, maykov, hermanlee4, yoshinorim, tnovak, dhruba
Differential Revision: https://reviews.facebook.net/D40905
Summary:
UpdateAccumulatedStats() is used to optimize compaction decision
esp. when the number of deletion entries are high, but this function
can slowdown DBOpen esp. in disk environment.
This patch adds DBOptions::skip_sats_update_on_db_open, which skips
UpdateAccumulatedStats() in DB::Open() time when it's set to true.
Test Plan: Add DBCompactionTest.SkipStatsUpdateTest
Reviewers: igor, anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: tnovak, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42843
Summary:
As of now compactions involving files from Level 0 and Level 1 are single
threaded because the files in L0, although sorted, are not range partitioned like
the other levels. This means that during L0-L1 compaction each file from L1
needs to be merged with potentially all the files from L0.
This attempt to parallelize the L0-L1 compaction assigns a thread and a
corresponding iterator to each L1 file that then considers only the key range
found in that L1 file and only the L0 files that have those keys (and only the
specific portion of those L0 files in which those keys are found). In this way
the overlap is minimized and potentially eliminated between different iterators
focusing on the same files.
The first step is to restructure the compaction logic to break L0-L1 compactions
into multiple, smaller, sequential compactions. Eventually each of these smaller
jobs will be run simultaneously. Areas to pay extra attention to are
# Correct aggregation of compaction job statistics across multiple threads
# Proper opening/closing of output files (make sure each thread's is unique)
# Keys that span multiple L1 files
# Skewed distributions of keys within L0 files
Test Plan: Make and run db_test (newer version has separate compaction tests) and compaction_job_stats_test
Reviewers: igor, noetzli, anthony, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42699
Summary: Directly using TMPDIR can cause problems when running tests using parallel option. Fix them.
Test Plan: Run all tests in parallel
Reviewers: kradhakrishnan, yhchiang, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42807
Summary: We want to keep Env a think layer for better portability. Less platform dependent codes should be moved out of Env. In this patch, I create a wrapper of file readers and writers, and put rate limiting, write buffering, as well as most perf context instrumentation and random kill out of Env. It will make it easier to maintain multiple Env in the future.
Test Plan: Run all existing unit tests.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42321
Summary:
When we first started, max_background_flushes was 0 by default and compaction thread was executing flushes (since there was no flush thread). Then, we switched the default max_background_flushes to 1. However, we still support the case where there is no flush thread and flushes are done in compaction. This is making our code a bit more complicated. By not supporting this use-case we can make our code simpler.
We have a special case that when you set max_background_flushes to 0, we
schedule the flush to execute on the compaction thread.
Test Plan: make check (there might be some unit tests that depend on this behavior)
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41931
Summary:
ROCKSDB_WARNING is only defined if either ROCKSDB_PLATFORM_POSIX or OS_WIN is defined. This works well for building rocksdb with its own build scripts. But this won't work when an outside project(like mongodb) doesn't define ROCKSDB_PLATFORM_POSIX.
This fix defines ROCKSDB_WARNING for all platforms. No idea if its defined correctly on non-posix,non-windows platforms but this is no worse that the current situation where this macro is missing on unexpected platforms.
This fix should hopefully fix anyone whose build broke now that we've switched from using #warning to Pragma (to support windows). Unfortunately, while mongo-rocks compiles, it ignores the Pragma and doesn't print a warning. I have not been able to figure out a way to implement this portably on all platforms.
Of course, an alternate solution would be to just get rid of ROCKSDB_WARNING and live with include file redirects indefinitely. Thoughts?
Test Plan: build rocks, build mongorocks
Reviewers: igor, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42477
- Remove make file defines from public headers and use _WIN32 because it is compiler defined
- use __GNUC__ and __clang__ to guard non-portable attributes
- add #include "port/port.h" to some new .cc files.
- minor changes in CMakeLists to reflect recent changes
Summary: Make TransactionLogIterator related tests from db_test.cc to db_log_iter_test.cc
Test Plan:
db_test
db_log_iter_test
Reviewers: sdong, IslamAbdelRahman, igor, anthony
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42045
Summary: This option is guarding the feature implemented 2 and a half years ago: D8991. The feature was enabled by default back then and has been running without issues. There is no reason why any client would turn this feature off. I found no reference in fbcode.
Test Plan: none
Reviewers: sdong, yhchiang, anthony, dhruba
Reviewed By: dhruba
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42063
Summary:
Move global static functions in db_test_util to DBTestBase.
This is to prevent unused function warning when decoupling
db_test.cc into multiple files.
Test Plan: db_test
Reviewers: igor, sdong, anthony, IslamAbdelRahman, kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D42009
Summary:
Move reusable part of db_test.cc to util/db_test_util.h.
This makes it more possible to partition db_test.cc into
multiple smaller test files.
Also, fixed many old lint errors in db_test.
Test Plan: db_test
Reviewers: igor, anthony, IslamAbdelRahman, sdong, kradhakrishnan
Reviewed By: sdong, kradhakrishnan
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41973
