Summary:
**Context:**
Searching `TableProperties::properties_offsets` across the codebase reveals that internally it is only used to find the external SST file's global seqno offeset. Therefore we can narrow it down and replace this map property with a uint64_t property `external_sst_file_global_seqno_offset` to save memory usage related to table properties.
Note:
- See PR comments for discussion about potential impact on existing external usage of `TableProperties::properties_offsets`
- See PR comments for discussion on keeping external SST file global seqno's offset VS using a simple flag indicating seqno's existence.
**Summary:**
- Replaced `TableProperties::properties_offsets` with `TableProperties::external_sst_file_global_seqno_offset`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9212
Test Plan: - Relied on existing tests should be sufficient since `TableProperties::properties_offsets` existed before and should already be tested.
Reviewed By: ajkr
Differential Revision: D32665941
Pulled By: hx235
fbshipit-source-id: 718e44617346dc4f3b1276ee953e61c196277795
Summary:
A bug in https://github.com/facebook/rocksdb/issues/9163 can cause checksum verification to fail if
parsing a properties block fails.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9189
Test Plan:
check_format_compatible.sh (never quite works locally but
this particular case seems fixed using variants of SHORT_TEST=1).
And added new unit test case.
Reviewed By: ajkr
Differential Revision: D32574626
Pulled By: pdillinger
fbshipit-source-id: 6fa5c8595737b71a3c3d011a52daf6d6c08715d7
Summary:
* Checksums are now checked on meta blocks unless specifically
suppressed or not applicable (e.g. plain table). (Was other way around.)
This means a number of cases that were not checking checksums now are,
including direct read TableProperties in Version::GetTableProperties
(fixed in meta_blocks ReadTableProperties), reading any block from
PersistentCache (fixed in BlockFetcher), read TableProperties in
SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open,
maybe more.
* For that to work, I moved the global_seqno+TableProperties checksum
logic to the shared table/ code, because that is used by many utilies
such as SstFileDumper.
* Also for that to work, we have to know when we're dealing with a block
that has a checksum (trailer), so added that capability to Footer based
on magic number, and from there BlockFetcher.
* Knowledge of trailer presence has also fixed a problem where other
table formats were reading blocks including bytes for a non-existant
trailer--and awkwardly kind-of not using them, e.g. no shared code
checking checksums. (BlockFetcher compression type was populated
incorrectly.) Now we only read what is needed.
* Minimized code duplication and differing/incompatible/awkward
abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block
without parsing block handle)
* Moved some meta block handling code from table_properties*.*
* Moved some code specific to block-based table from shared table/ code
to BlockBasedTable class. The checksum stuff means we can't completely
separate it, but things that don't need to be in shared table/ code
should not be.
* Use unique_ptr rather than raw ptr in more places. (Note: you can
std::move from unique_ptr to shared_ptr.)
Without enhancements to GetPropertiesOfAllTablesTest (see below),
net reduction of roughly 100 lines of code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163
Test Plan:
existing tests and
* Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that
checksums are now checked on direct read of table properties by TableCache
(new test would fail before this change)
* Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test
putting table properties under old meta name
* Also generally enhanced that same test to actually test what it was
supposed to be testing already, by kicking things out of table cache when
we don't want them there.
Reviewed By: ajkr, mrambacher
Differential Revision: D32514757
Pulled By: pdillinger
fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9
Summary:
This header file was including everything and the kitchen sink when it did not need to. This resulted in many places including this header when they needed other pieces instead.
Cleaned up this header to only include what was needed and fixed up the remaining code to include what was now missing.
Hopefully, this sort of code hygiene cleanup will speed up the builds...
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8930
Reviewed By: pdillinger
Differential Revision: D31142788
Pulled By: mrambacher
fbshipit-source-id: 6b45de3f300750c79f751f6227dece9cfd44085d
Summary:
I very recently realized that with https://github.com/facebook/rocksdb/issues/8669 we cannot later add
file numbers to external SST files (so that more can share db session
ids for better uniqueness properties), because of forward compatibility.
We would have a version of RocksDB that assumes session IDs are unique
on external SST files and therefore can't really break that invariant in
future files.
This change adds a table property for "orig_file_number" which is
populated by normal SST files and also external SST files generated by
SstFileWriter. SstFileWriter now keeps a db_session_id for life of the
object and increments its own file numbers for embedding in table
properties. (They are arguably "fake" file numbers because these numbers
and not embedded in the file name.)
While updating block_based_table_builder, I removed several unnecessary
fields from Rep, because following the pattern would have created
another unnecessary field.
This change also updates block_based_table_reader to use this new
property when available, which means that for newer SST files, we can
determine the stable/original <db_session_id,file_number> unique
identifier using just the file contents, not the file name. (It's a bit
complicated; detailed comments in block_based_table_reader.)
Also added DB host id to properties listing by sst_dump, which could be
useful in debugging.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8686
Test Plan: majorly overhauled StableCacheKeys test for this change
Reviewed By: zhichao-cao
Differential Revision: D30457742
Pulled By: pdillinger
fbshipit-source-id: 2e5ae7dddeb94fb9d8eac8a928486aed8b8cd445
Summary:
Use DB session ids in SST table properties to make cache keys
stable across DB re-open and copy / move / restore / etc.
These new cache keys are currently only enabled when FileSystem does not
provide GetUniqueId. For now, they are typically larger, so slightly
less efficient.
Relevant to https://github.com/facebook/rocksdb/issues/7405
This change has a minor regression in PersistentCache functionality:
metaindex blocks are no longer cached in PersistentCache. Table properties
blocks already were not but ideally should be. I didn't spent effort to
fix & test these issues because we don't believe PersistentCache is used much
if at all and expect SecondaryCache to replace it. (Though PRs are welcome.)
FIXME: there is more to be fixed for stable cache keys on external SST files
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8659
Test Plan:
new unit test added, which fails when disabling new
functionality
Reviewed By: zhichao-cao
Differential Revision: D30297705
Pulled By: pdillinger
fbshipit-source-id: e8539a5c8802a79340405629870f2e3fb3822d3a
Summary:
With Ribbon filter work and possible variance in actual bits
per key (or prefix; general term "entry") to achieve certain FP rates,
I've received a request to be able to track actual bits per key in
generated filters. This change adds a num_filter_entries table
property, which can be combined with filter_size to get bits per key
(entry).
This can vary from num_entries in at least these ways:
* Different versions of same key are only counted once in filters.
* With prefix filters, several user keys map to the same filter entry.
* A single filter can include both prefixes and user keys.
Note that FilterBlockBuilder::NumAdded() didn't do anything useful
except distinguish empty from non-empty.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8323
Test Plan: basic unit test included, others updated
Reviewed By: jay-zhuang
Differential Revision: D28596210
Pulled By: pdillinger
fbshipit-source-id: 529a111f3c84501e5a470bc84705e436ee68c376
Summary:
The ImmutableCFOptions contained a bunch of fields that belonged to the ImmutableDBOptions. This change cleans that up by introducing an ImmutableOptions struct. Following the pattern of Options struct, this class inherits from the DB and CFOption structs (of the Immutable form).
Only one structural change (the ImmutableCFOptions::fs was changed to a shared_ptr from a raw one) is in this PR. All of the other changes involve moving the member variables from the ImmutableCFOptions into the ImmutableOptions and changing member variables or function parameters as required for compilation purposes.
Follow-on PRs may do a further clean-up of the code, such as renaming variables (such as "ImmutableOptions cf_options") and potentially eliminating un-needed function parameters (there is no longer a need to pass both an ImmutableDBOptions and an ImmutableOptions to a function).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8262
Reviewed By: pdillinger
Differential Revision: D28226540
Pulled By: mrambacher
fbshipit-source-id: 18ae71eadc879dedbe38b1eb8e6f9ff5c7147dbf
Summary:
Renaming ImmutableCFOptions::info_log and statistics to logger and stats. This is stage 2 in creating an ImmutableOptions class. It is necessary because the names match those in ImmutableOptions and have different types.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8227
Reviewed By: jay-zhuang
Differential Revision: D28000967
Pulled By: mrambacher
fbshipit-source-id: 3bf2aa04e8f1e8724d825b7deacf41080c14420b
Summary:
This PR is a first step at attempting to clean up some of the Mutable/Immutable Options code. With this change, a DBOption and a ColumnFamilyOption can be reconstructed from their Mutable and Immutable equivalents, respectively.
readrandom tests do not show any performance degradation versus master (though both are slightly slower than the current 6.19 release).
There are still fields in the ImmutableCFOptions that are not CF options but DB options. Eventually, I would like to move those into an ImmutableOptions (= ImmutableDBOptions+ImmutableCFOptions). But that will be part of a future PR to minimize changes and disruptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8176
Reviewed By: pdillinger
Differential Revision: D27954339
Pulled By: mrambacher
fbshipit-source-id: ec6b805ba9afe6e094bffdbd76246c2d99aa9fad
Summary:
Added `TableProperties::{fast,slow}_compression_estimated_data_size`.
These properties are present in block-based tables when
`ColumnFamilyOptions::sample_for_compression > 0` and the necessary
compression library is supported when the file is generated. They
contain estimates of what `TableProperties::data_size` would be if the
"fast"/"slow" compression library had been used instead. One
limitation is we do not record exactly which "fast" (ZSTD or Zlib)
or "slow" (LZ4 or Snappy) compression library produced the result.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8139
Test Plan:
- new unit test
- ran `db_bench` with `sample_for_compression=1`; verified the `data_size` property matches the `{slow,fast}_compression_estimated_data_size` when the same compression type is used for the output file compression and the sampled compression
Reviewed By: riversand963
Differential Revision: D27454338
Pulled By: ajkr
fbshipit-source-id: 9529293de93ddac7f03b2e149d746e9f634abac4
Summary:
Previously it only applied to block-based tables generated by flush. This restriction
was undocumented and blocked a new use case. Now compression sampling
applies to all block-based tables we generate when it is enabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8105
Test Plan: new unit test
Reviewed By: riversand963
Differential Revision: D27317275
Pulled By: ajkr
fbshipit-source-id: cd9fcc5178d6515e8cb59c6facb5ac01893cb5b0
Summary:
This PR adds support for writing a location identifier of the DB host to SST files as a table property. By default, the hostname is used, but can be overridden by the user. There have been some recent corruptions in files written by ```SstFileWriter``` before checksumming, so this property can be used to trace it back to the writing host and checking the host for hardware isues.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7479
Test Plan: Add new unit tests
Reviewed By: pdillinger
Differential Revision: D24340671
Pulled By: anand1976
fbshipit-source-id: 2038949fd8d160c0633ccb4f9da77740f19fa2a2
Summary:
Prior to 6.12, backup files using share_files_with_checksum had
the file size encoded in the file name, after the last '\_' and before
the last '.'. We considered this an implementation detail subject to
change, and indeed removed this information from the file name (with an
option to use old behavior) because it was considered
ineffective/inefficient for file name uniqueness. However, some
downstream RocksDB users were relying on this information since the file
size is not explicitly in the backup manifest file.
This primary purpose of this change is "retrofitting" the 6.12 release
(not yet a public release) to simultaneously support the benefits of the
new naming scheme (I/O performance and data correctness at scale) and
preserve the file size information, both as default behaviors. With this
change, we are essentially making the file size information encoded in
the file name an official, though obscure, extension of the backup meta
file format.
We preserve an option (kLegacyCrc32cAndFileSize) to use the original
"legacy" naming scheme, with its caveats, and make it easy to omit the
file size information (no kFlagIncludeFileSize), for more compact file
names. But note that changing the naming scheme used on an existing db
and backup directory can lead to transient space amplification, as some
files will be stored under two names in the shared_checksum directory.
Because some backups were saved using the original 6.12 naming scheme,
we offer two ways of dealing with those files: SST files generated by
older 6.12 versions can either use the default naming scheme in effect
when the SST files were generated (kFlagMatchInterimNaming, default, no
transient space amplification) or can use a new naming scheme (no
kFlagMatchInterimNaming, potential space amplification because some
already stored files getting a new name).
We don't have a natural way to detect which files were generated by
previous 6.12 versions, but this change hacks one in by changing DB
session ids to now use a more concise encoding, reducing file name
length, saving ~dozen bytes from SST files, and making them visually
distinct from DB ids so that they are less likely to be mixed up.
Two final auxiliary notes:
Recognizing that the backup file names have become a de facto part of
the backup meta schema, this change makes them easier to parse and
extend by putting a distinct marker, 's', before DB session ids embedded
in the name. When we extend this to allow custom checksums in the name,
they can get their own marker to ensure safe parsing. For backward
compatibility, file size does not get a marker but is assumed for
`_[0-9]+[.]`
Another change from initial 6.12 default behavior is never including
file custom checksum in the file name. Looking ahead to 6.13, we do not
want the default behavior to cause backup space amplification for
someone turning on file custom checksum checking in BackupEngine; we
want that to be an easy decision. When implemented, including file
custom checksums in backup file names will be a non-default option.
Actual file name patterns and priorities, as regexes:
kLegacyCrc32cAndFileSize OR pre-6.12 SST file ->
[0-9]+_[0-9]+_[0-9]+[.]sst
kFlagMatchInterimNaming set (default) AND early 6.12 SST file ->
[0-9]+_[0-9a-fA-F-]+[.]sst
kUseDbSessionId AND NOT kFlagIncludeFileSize ->
[0-9]+_s[0-9A-Z]{20}[.]sst
kUseDbSessionId AND kFlagIncludeFileSize (default) ->
[0-9]+_s[0-9A-Z]{20}_[0-9]+[.]sst
We might add opt-in options for more '\_' separated data in the name,
but embedded file size, if present, will always be after last '\_' and
before '.sst'.
This change was originally applied to version 6.12. (See https://github.com/facebook/rocksdb/issues/7390)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7400
Test Plan:
unit tests included. Sync point callbacks are used to mimic
previous version SST files.
Reviewed By: ajkr
Differential Revision: D23759587
Pulled By: pdillinger
fbshipit-source-id: f62d8af4e0978de0a34f26288cfbe66049b70025
Summary:
Current implementation of the ```read_options.deadline``` option only checks the deadline for random file reads during point lookups. This PR extends the checks to file opens, prefetches and preloads as part of table open.
The main changes are in the ```BlockBasedTable```, partitioned index and filter readers, and ```TableCache``` to take ReadOptions as an additional parameter. In ```BlockBasedTable::Open```, in order to retain existing behavior w.r.t checksum verification and block cache usage, we filter out most of the options in ```ReadOptions``` except ```deadline```. However, having the ```ReadOptions``` gives us more flexibility to honor other options like verify_checksums, fill_cache etc. in the future.
Additional changes in callsites due to function signature changes in ```NewTableReader()``` and ```FilePrefetchBuffer```.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6982
Test Plan: Add new unit tests in db_basic_test
Reviewed By: riversand963
Differential Revision: D22219515
Pulled By: anand1976
fbshipit-source-id: 8a3b92f4a889808013838603aa3ca35229cd501b
Summary:
`db_id` and `db_session_id` are now part of the table properties for all formats and stored in SST files. This adds about 99 bytes to each new SST file.
The `TablePropertiesNames` for these two identifiers are `rocksdb.creating.db.identity` and `rocksdb.creating.session.identity`.
In addition, SST files generated from SstFileWriter and Repairer have DB identity “SST Writer” and “DB Repairer”, respectively. Their DB session IDs are generated in the same way as `DB::GetDbSessionId`.
A table property test is added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6983
Test Plan: make check and some manual tests.
Reviewed By: zhichao-cao
Differential Revision: D22048826
Pulled By: gg814
fbshipit-source-id: afdf8c11424a6f509b5c0b06dafad584a80103c9
Summary:
sst_dump can issue many file reads from the file system. This doesn't work well with file systems without a OS cache, especially remote file systems. In order to mitigate this problem, several improvements are done:
1. --readahead_size is added, so that users can specify readahead size when scanning the data.
2. Force a 512KB tail readahead, which prevents three I/Os for footer, meta index and property blocks and hopefully index and filter blocks too.
3. Consoldiate SSTDump's I/Os before opening the file for read. Use the same file prefetch buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6836
Test Plan: Add a test that covers this new feature.
Reviewed By: pdillinger
Differential Revision: D21516607
fbshipit-source-id: 3ae43526286f67b2f4a5bdedfbc92719d579b87e
Summary:
Original author: jeffrey-xiao
If we are writing a global seqno for an ingested file, the range
tombstone metablock gets accessed and put into the cache during
ingestion preparation. At the time, the global seqno of the ingested
file has not yet been determined, so the cached block will not have a
global seqno. When the file is ingested and we read its range tombstone
metablock, it will be returned from the cache with no global seqno. In
that case, we use the actual seqnos stored in the range tombstones,
which are all zero, so the tombstones cover nothing.
This commit removes global_seqno_ variable from Block. When iterating
over a block, the global seqno for the block is determined by the
iterator instead of storing this mutable attribute in Block.
Additionally, this commit adds a regression test to check that keys are
deleted when ingesting a file with a global seqno and range deletion
tombstones.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6429
Differential Revision: D19961563
Pulled By: ajkr
fbshipit-source-id: 5cf777397fa3e452401f0bf0364b0750492487b7
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
file_reader_writer.h and .cc contain several files and helper function, and it's hard to navigate. Separate it to multiple files and put them under file/
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5803
Test Plan: Build whole project using make and cmake.
Differential Revision: D17374550
fbshipit-source-id: 10efca907721e7a78ed25bbf74dc5410dea05987
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
Summary:
Currently the read-ahead logic for user reads and compaction reads go through different code paths where compaction reads create new table readers and use `ReadaheadRandomAccessFile`. This change is to unify read-ahead logic to use read-ahead in BlockBasedTableReader::InitDataBlock(). As a result of the change `ReadAheadRandomAccessFile` class and `new_table_reader_for_compaction_inputs` option will no longer be used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5431
Test Plan:
make check
Here is the benchmarking - https://gist.github.com/vjnadimpalli/083cf423f7b6aa12dcdb14c858bc18a5
Differential Revision: D15772533
Pulled By: vjnadimpalli
fbshipit-source-id: b71dca710590471ede6fb37553388654e2e479b9
Summary:
The patch brings the semantics of per-block-type read performance
context counters in sync with the generic block_read_count by only
incrementing the counter if the block was actually read from the file.
It also fixes index_block_read_count, which fell victim to the
refactoring in PR https://github.com/facebook/rocksdb/issues/5298.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5484
Test Plan: Extended the unit tests.
Differential Revision: D15887431
Pulled By: ltamasi
fbshipit-source-id: a3889759d0ac5759d56625d692cd828d1b9207a6
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
We found an issue in Periodic Compactions (introduced in #5166) where files were not being picked up for compactions as all the SST files created with older versions of RocksDB have `file_creation_time` as 0. (Note that `file_creation_time` is a new table property introduced in #5166).
To address this, Periodic compactions now fall back to looking at the `creation_time` table property or the file's modification time (as given by the Env) when `file_creation_time` table property is found to be 0.
Here how the file's modification time (and, in turn, the file age) is computed now:
1. Use `file_creation_time` table property if it is > 0.
1. If not, then use `creation_time` table property if it is > 0.
1. If not, then use file's mtime stat metadata given by the underlying Env.
Don't consider the file at all for compaction if the modification time cannot be correctly determined based on the above conditions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5184
Differential Revision: D14907795
Pulled By: sagar0
fbshipit-source-id: 4bb2f3631f9a3e04470c674a1d13544584e1e56c
Summary:
Introducing Periodic Compactions.
This feature allows all the files in a CF to be periodically compacted. It could help in catching any corruptions that could creep into the DB proactively as every file is constantly getting re-compacted. And also, of course, it helps to cleanup data older than certain threshold.
- Introduced a new option `periodic_compaction_time` to control how long a file can live without being compacted in a CF.
- This works across all levels.
- The files are put in the same level after going through the compaction. (Related files in the same level are picked up as `ExpandInputstoCleanCut` is used).
- Compaction filters, if any, are invoked as usual.
- A new table property, `file_creation_time`, is introduced to implement this feature. This property is set to the time at which the SST file was created (and that time is given by the underlying Env/OS).
This feature can be enabled on its own, or in conjunction with `ttl`. It is possible to set a different time threshold for the bottom level when used in conjunction with ttl. Since `ttl` works only on 0 to last but one levels, you could set `ttl` to, say, 1 day, and `periodic_compaction_time` to, say, 7 days. Since `ttl < periodic_compaction_time` all files in last but one levels keep getting picked up based on ttl, and almost never based on periodic_compaction_time. The files in the bottom level get picked up for compaction based on `periodic_compaction_time`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5166
Differential Revision: D14884441
Pulled By: sagar0
fbshipit-source-id: 408426cbacb409c06386a98632dcf90bfa1bda47
Summary:
Since we are planning to use dictionary compression and to use different compression level, it is quite useful to add compression options to TableProperties. For example, in MyRocks, if the feature is available, we can query from information_schema.rocksdb_sst_props to see if all sst files are converted to ZSTD dictionary compressions. Resolves https://github.com/facebook/rocksdb/issues/4992
With this PR, user can query table properties through `GetPropertiesOfAllTables` API and get compression options as std::string:
`window_bits=-14; level=32767; strategy=0; max_dict_bytes=0; zstd_max_train_bytes=0; enabled=0;`
or table_properties->ToString() will also contain it
`# data blocks=1; # entries=13; # deletions=0; # merge operands=0; # range deletions=0; raw key size=143; raw average key size=11.000000; raw value size=39; raw average value size=3.000000; data block size=120; index block size (user-key? 0, delta-value? 0)=27; filter block size=0; (estimated) table size=147; filter policy name=N/A; prefix extractor name=nullptr; column family ID=0; column family name=default; comparator name=leveldb.BytewiseComparator; merge operator name=nullptr; property collectors names=[]; SST file compression algo=Snappy; SST file compression options=window_bits=-14; level=32767; strategy=0; max_dict_bytes=0; zstd_max_train_bytes=0; enabled=0; ; creation time=1552946632; time stamp of earliest key=1552946632;`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5081
Differential Revision: D14716692
Pulled By: miasantreble
fbshipit-source-id: 7d2f2cf84e052bff876e71b4212cfdebf5be32dd
Summary:
This is a feature to sample data-block compressibility and and report them as stats. 1 in N (tunable) blocks is sampled for compressibility using two algorithms:
1. lz4 or snappy for fast compression
2. zstd or zlib for slow but higher compression.
The stats are reported to the caller as raw-bytes and compressed-bytes. The block continues to be compressed for storage using the specified CompressionType.
The db_bench_tool how has a command line option for specifying the sampling rate. It's default value is 0 (no sampling). To test the overhead for a certain value, users can compare the performance of db_bench_tool, varying the sampling rate. It is unlikely to have a noticeable impact for high values like 20.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4842
Differential Revision: D13629011
Pulled By: shobhitdayal
fbshipit-source-id: 14ca668bcab6499b2a1734edf848eb62a4f4fafa
Summary:
Always enable properties block checksum verification for block-based table. For external SST file ingested with 'write_global_seqno==true', we use 'DecodeEntrySlow' to parse its blocks' contents so that the process will not die upon failing the assertion possibly caused by corruption.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4956
Differential Revision: D14012741
Pulled By: riversand963
fbshipit-source-id: 8b766e6f54b36f8f9e074c0e19e0926ec3cce186
Summary:
- If block cache disabled or not used for meta-blocks, `BlockBasedTableReader::Rep::uncompression_dict` owns the `UncompressionDict`. It is preloaded during `PrefetchIndexAndFilterBlocks`.
- If block cache is enabled and used for meta-blocks, block cache owns the `UncompressionDict`, which holds dictionary and digested dictionary when needed. It is never prefetched though there is a TODO for this in the code. The cache key is simply the compression dictionary block handle.
- New stats for compression dictionary accesses in block cache: "BLOCK_CACHE_COMPRESSION_DICT_*" and "compression_dict_block_read_count"
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4881
Differential Revision: D13663801
Pulled By: ajkr
fbshipit-source-id: bdcc54044e180855cdcc57639b493b0e016c9a3f
Summary:
Fix block based table reader not using memory_allocator when allocating index blocks and compression dictionary blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4678
Differential Revision: D13054594
Pulled By: yiwu-arbug
fbshipit-source-id: 379f25bcc665395662511c4f873f4b7b55104ce2
Summary:
We carry compression type and "cachable" variables for every block in the block cache, while they take well-known values. 8-byte is wasted for each block (2-byte for useful information but it takes 8 bytes because of padding). With this change, these two variables are removed.
The cachable information is only useful in the process of reading the block. We use other information to infer from it. For compressed blocks, the compression type is a part of the block content itself so we can get it from there.
Some code is slightly refactored so that the cachable information can flow better.
Another change is to only use class BlockContents for compressed block, and narrow the class Block to only be used for uncompressed blocks, including blocks in compressed block cache. This can make the Block class less confusing. It also saves tens of bytes for each block in compressed block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4650
Differential Revision: D12969070
Pulled By: siying
fbshipit-source-id: 548b62724e9eb66993026429fd9c7c3acd1f95ed
Summary:
Since the number of range deletions are reported in
TableProperties, it is confusing to not report the number of merge
operands and point deletions as top-level properties; they are
accessible through the public API, but since they are not the "main"
properties, they do not appear in aggregated table properties, or the
string representation of table properties.
This change promotes those two property keys to
`rocksdb/table_properties.h`, adds corresponding uint64 members for
them, deprecates the old access methods `GetDeletedKeys()` and
`GetMergeOperands()` (though they are still usable for now), and removes
`InternalKeyPropertiesCollector`. The property key strings are the same
as before this change, so this should be able to read DBs written from older
versions (though I haven't tested this yet).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4594
Differential Revision: D12826893
Pulled By: abhimadan
fbshipit-source-id: 9e4e4fbdc5b0da161c89582566d184101ba8eb68
Summary:
Given that index value is a BlockHandle, which is basically an <offset, size> pair we can apply delta encoding on the values. The first value at each index restart interval encoded the full BlockHandle but the rest encode only the size. Refer to IndexBlockIter::DecodeCurrentValue for the detail of the encoding. This reduces the index size which helps using the block cache more efficiently. The feature is enabled with using format_version 4.
The feature comes with a bit of cpu overhead which should be paid back by the higher cache hits due to smaller index block size.
Results with sysbench read-only using 4k blocks and using 16 index restart interval:
Format 2:
19585 rocksdb read-only range=100
Format 3:
19569 rocksdb read-only range=100
Format 4:
19352 rocksdb read-only range=100
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3983
Differential Revision: D8361343
Pulled By: maysamyabandeh
fbshipit-source-id: f882ee082322acac32b0072e2bdbb0b5f854e651
Summary:
Some logic only related to IndexBlockIter is separated from BlockIter to IndexBlockIter. This is done by writing an exclusive Seek() and SeekForPrev() for DataBlockIter, and all metadata block iter and tombstone block iter now use data block iter. Dealing with the BinarySeek() sharing problem by passing in the comparator to use.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4136
Reviewed By: maysamyabandeh
Differential Revision: D8859673
Pulled By: siying
fbshipit-source-id: 703e5e6824b82b7cbf4721f3594b94127797ca9e
Summary:
BlockIter is getting crowded including details that specific only to either index or data blocks. The patch moves down such details to DataBlockIter and IndexBlockIter, both inheriting from BlockIter.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4121
Differential Revision: D8816832
Pulled By: maysamyabandeh
fbshipit-source-id: d492e74155c11d8a0c1c85cd7ee33d24c7456197
Summary:
Add a new table property, rocksdb.num.range-deletions, which tracks the
number of range deletions in a block-based table. Range deletions are no
longer counted in rocksdb.num.entries; as discovered in PR #3778, there
are various code paths that implicitly assume that rocksdb.num.entries
counts only true keys, not range deletions.
/cc ajkr nvanbenschoten
Closes https://github.com/facebook/rocksdb/pull/4016
Differential Revision: D8527575
Pulled By: ajkr
fbshipit-source-id: 92e7edbe78fda53756a558013c9fb496e7764fd7
Summary:
The Block object assumes contents are uncompressed. Block's constructor tries to read the number of restarts, but does not get an accurate number when its contents are compressed, which is causing issues like https://github.com/facebook/rocksdb/issues/3843.
This PR address this issue by skipping reconstruction of restart points when blocks are known to be compressed. Somehow the restart points can be read directly when Snappy is used and some tests (for example https://github.com/facebook/rocksdb/blob/master/db/db_block_cache_test.cc#L196) expects blocks to be fully constructed even when Snappy compression is used, so here we keep the restart point logic for Snappy.
Closes https://github.com/facebook/rocksdb/pull/3996
Differential Revision: D8416186
Pulled By: miasantreble
fbshipit-source-id: 002c0b62b9e5d89fb7736563d354ce0023c8cb28
Summary:
Property block will be read sequentially and cached in a heap located
object, so there's no need for restart points. Thus we set the restart
interval to infinity to save space.
Closes https://github.com/facebook/rocksdb/pull/3970
Differential Revision: D8332586
Pulled By: fgwu
fbshipit-source-id: 899c3267832a81d0f084ec2db6b387332f461134
Summary:
Index blocks have the same format as data blocks. The keys therefore similarly to the keys in the data blocks are internal keys, which means that in addition to the user key it also has 8 bytes that encodes sequence number and value type. This extra 8 bytes however is not necessary in index blocks since the index keys act as an separator between two data blocks. The only exception is when the last key of a block and the first key of the next block share the same user key, in which the sequence number is required to act as a separator.
The patch excludes the sequence from index keys only if the above special case does not happen for any of the index keys. It then records that in the property block. The reader looks at the property block to see if it should expect sequence numbers in the keys of the index block.s
Closes https://github.com/facebook/rocksdb/pull/3894
Differential Revision: D8118775
Pulled By: maysamyabandeh
fbshipit-source-id: 915479f028b5799ca91671d67455ecdefbd873bd
Summary:
Divide ReadBlockContents() to multiple sub-functions. Maintaining the input and intermediate data in a new class BlockFetcher.
I hope in general it makes the code easier to maintain.
Another motivation to do it is to clearly divide the logic before file reading and after file reading. The refactor will help us evaluate how can we make I/O async in the future.
Closes https://github.com/facebook/rocksdb/pull/3244
Differential Revision: D6520983
Pulled By: siying
fbshipit-source-id: 338d90bc0338472d46be7a7682028dc9114b12e9
Summary:
With FIFO compaction we would like to get the oldest data time for monitoring. The problem is we don't have timestamp for each key in the DB. As an approximation, we expose the earliest of sst file "creation_time" property.
My plan is to override the property with a more accurate value with blob db, where we actually have timestamp.
Closes https://github.com/facebook/rocksdb/pull/2842
Differential Revision: D5770600
Pulled By: yiwu-arbug
fbshipit-source-id: 03833c8f10bbfbee62f8ea5c0d03c0cafb5d853a
Summary:
In SST files, restart interval helps us search in data blocks. However, some meta blocks will be read sequentially, so there's no need for restart points. Restart interval will introduce extra space in the block (https://github.com/facebook/rocksdb/blob/master/table/block_builder.cc#L80). We will see if we can remove this redundant space. (Maybe set restart interval to infinite.)
Closes https://github.com/facebook/rocksdb/pull/2940
Differential Revision: D5930139
Pulled By: miasantreble
fbshipit-source-id: 92b1b23c15cffa90378343ac846b713623b19c21
Summary:
Right now, if direct I/O is enabled, prefetching the last 512KB cannot be applied, except compaction inputs or readahead is enabled for iterators. This can create a lot of I/O for HDD cases. To solve the problem, the 512KB is prefetched in block based table if direct I/O is enabled. The prefetched buffer is passed in totegher with random access file reader, so that we try to read from the buffer before reading from the file. This can be extended in the future to support flexible user iterator readahead too.
Closes https://github.com/facebook/rocksdb/pull/2708
Differential Revision: D5593091
Pulled By: siying
fbshipit-source-id: ee36ff6d8af11c312a2622272b21957a7b5c81e7
