Summary:
Add an option to set the WAL compression algorithm - wal_compression.
TODO: WAL compression is not implemented and will only support zstd initially. Will be added in subsequent diffs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9432
Reviewed By: pdillinger
Differential Revision: D33797275
Pulled By: sidroyc
fbshipit-source-id: 8db81d9c9cea5e2e4f1445d3aecad8106137b8e7
Summary:
Fixes a major performance regression in 6.26, where
extra CPU is spent in SliceTransform::AsString when reads involve
a prefix_extractor (Get, MultiGet, Seek). Common case performance
is now better than 6.25.
This change creates a "fast path" for verifying that the current prefix
extractor is unchanged and compatible with what was used to
generate a table file. This fast path detects the common case by
pointer comparison on the current prefix_extractor and a "known
good" prefix extractor (if applicable) that is saved at the time the
table reader is opened. The "known good" prefix extractor is saved
as another shared_ptr copy (in an existing field, however) to ensure
the pointer is not recycled.
When the prefix_extractor has changed to a different instance but
same compatible configuration (rare, odd), performance is still a
regression compared to 6.25, but this is likely acceptable because
of the oddity of such a case. The performance of incompatible
prefix_extractor is essentially unchanged.
Also fixed a minor case (ForwardIterator) where a prefix_extractor
could be used via a raw pointer after being freed as a shared_ptr,
if replaced via SetOptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9407
Test Plan:
## Performance
Populate DB with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=10000000 -disable_wal=1 -write_buffer_size=10000000 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12`
Running head-to-head comparisons simultaneously with `TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -use_existing_db -readonly -benchmarks=seekrandom -num=10000000 -duration=20 -disable_wal=1 -bloom_bits=16 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=0 -prefix_size=12`
Below each is compared by ops/sec vs. baseline which is version 6.25 (multiple baseline runs because of variable machine load)
v6.26: 4833 vs. 6698 (<- major regression!)
v6.27: 4737 vs. 6397 (still)
New: 6704 vs. 6461 (better than baseline in common case)
Disabled fastpath: 4843 vs. 6389 (e.g. if prefix extractor instance changes but is still compatible)
Changed prefix size (no usable filter) in new: 787 vs. 5927
Changed prefix size (no usable filter) in new & baseline: 773 vs. 784
Reviewed By: mrambacher
Differential Revision: D33677812
Pulled By: pdillinger
fbshipit-source-id: 571d9711c461fb97f957378a061b7e7dbc4d6a76
Summary:
Wasn't able to easily reproduce error, but easy to see a race
condition between TestFlushListener::OnFlushCompleted and
DBTestBase::Close(), which frees CF handles before closing DB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9400
Test Plan: CI etc.
Reviewed By: riversand963
Differential Revision: D33645134
Pulled By: pdillinger
fbshipit-source-id: d0ec914cc43c9e14f53da633876b95b61995138d
Summary:
In response to https://github.com/facebook/rocksdb/issues/9354, this PR adds a way for users to "opt out"
of extra checks that can impact peak write performance, which
currently only includes force_consistency_checks. I considered including
some other options but did not see a db_bench performance difference.
Also clarify in comment for force_consistency_checks that it can "slow
down saturated writing."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9363
Test Plan:
basic coverage in unit tests
Using my perf test in https://github.com/facebook/rocksdb/issues/9354 comment, I see
force_consistency_checks=true -> 725360 ops/s
force_consistency_checks=false -> 783072 ops/s
Reviewed By: mrambacher
Differential Revision: D33636559
Pulled By: pdillinger
fbshipit-source-id: 25bfd006f4844675e7669b342817dd4c6a641e84
Summary:
Fix https://github.com/facebook/rocksdb/issues/8046 : FlushMemTable return ok but memtable does not synchronize flush. The way to fix it is to expose RecoveryError.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8173
Reviewed By: ajkr
Differential Revision: D31674552
Pulled By: jay-zhuang
fbshipit-source-id: 9d16b69ba12a196bb429332ec8224754de97773d
Summary:
As title.
This is part of an fb-internal task.
First, remove all `using namespace` statements if applicable.
Next, utilize multiple build platforms and see if anything is broken.
Should anything become broken, fix the compilation errors with as little extra change as possible.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9369
Test Plan:
internal build and make check
make clean && make static_lib && cd examples && make all
Reviewed By: pdillinger
Differential Revision: D33517260
Pulled By: riversand963
fbshipit-source-id: 3fc4ce6402a073421dfd9a9b2d1c79441dca7a40
Summary:
Compatible change, more natural (especially in generated Rust bindings), no risk that the API will ever need mutable access because it has to make a copy anyway.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9376
Reviewed By: ajkr
Differential Revision: D33541435
Pulled By: pdillinger
fbshipit-source-id: 15c512a0d70b6e8694fa99d598b7d022751c1e59
Summary:
In order to support old-style regex function registration, restored the original "Register<T>(string, Factory)" method using regular expressions. The PatternEntry methods were left in place but renamed to AddFactory. The goal is to allow for the deprecation of the original regex Registry method in an upcoming release.
Added modes to the PatternEntry kMatchZeroOrMore and kMatchAtLeastOne to match * or +, respectively (kMatchAtLeastOne was the original behavior).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9362
Reviewed By: pdillinger
Differential Revision: D33432562
Pulled By: mrambacher
fbshipit-source-id: ed88ab3f9a2ad0d525c7bd1692873f9bb3209d02
Summary:
This change adds the filename of the offending filen to several place that produce Status objects with code `kCorruption`.
This is not an attempt to have every Corruption message in the codebase extended with the filename, but it is a start.
The motivation for the change was to quickly diagnose which file is corrupted when a large database is openend and there is not option to copy it offsite for analysis, run strace or install the ldb tool.
In the particular case in question, the error message improved from a mere
```
Corruption: checksum mismatch
```
to
```
Corruption: checksum mismatch in file /path/to/db/engine-rocksdb/MANIFEST-000171
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9239
Reviewed By: jay-zhuang
Differential Revision: D33237742
Pulled By: riversand963
fbshipit-source-id: bd42559cfbf786a0a674d091671d1a2bf07bdd31
Summary:
Function `Version::UpdateFilesByCompactionPri()` is never called and not implemented.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8724
Reviewed By: ajkr
Differential Revision: D30643943
Pulled By: riversand963
fbshipit-source-id: 174b2d9a2a42e286222909a035cc74a7b5602335
Summary:
Closing https://github.com/facebook/rocksdb/issues/5006
Calling `DB::DestroyColumnFamilyHandle(column_family)` with `column_family` being the return value of
`DB::DefaultColumnFamily()` will return `Status::InvalidArgument()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9347
Test Plan: make check
Reviewed By: akankshamahajan15
Differential Revision: D33369675
Pulled By: riversand963
fbshipit-source-id: a8266a4daddf2b7a773c2dc7f3eb9a4adfb6b6dd
Summary:
The LastSequence field in the MANIFEST file is the baseline seqno for a recovered DB. Recovering WAL entries might cause the recovered DB's seqno to advance above this baseline, but the recovered DB will never use a smaller seqno.
Before this PR, we were writing the DB's seqno at the time of LogAndApply() as the LastSequence value. This works in the sense that it is a large enough baseline for the recovered DB that it'll never overwrite any records in existing SST files. At the same time, it's arbitrarily larger than what's needed. This behavior comes from LevelDB, where there was no tracking of largest seqno in an SST file.
Now we know the largest seqno of newly written SST files, so we can write an exact value in LastSequence that actually reflects the largest seqno in any file referred to by the MANIFEST. This is primarily useful for correctness testing with unsynced data loss, where the recovered DB's seqno needs to indicate what records were recovered.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9305
Test Plan:
- https://github.com/facebook/rocksdb/issues/9338 adds crash-recovery correctness testing coverage for WAL disabled use cases
- https://github.com/facebook/rocksdb/issues/9357 will extend that testing to cover file ingestion
- Added assertion at end of LogAndApply() for `VersionSet::descriptor_last_sequence_` consistency with files
- Manually tested upgrade/downgrade compatibility with a custom crash test that randomly picks between a `db_stress` built with and without this PR (for old code it must run with `-disable_wal=0`)
Reviewed By: riversand963
Differential Revision: D33182770
Pulled By: ajkr
fbshipit-source-id: 0bfafaf685f347cc8cb0e1d62e0186340a738f7d
Summary:
Allows the Env to have options (Configurable) and loads like other Customizable classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9293
Reviewed By: pdillinger, zhichao-cao
Differential Revision: D33181591
Pulled By: mrambacher
fbshipit-source-id: 55e823886c654d214eda9eedd45ccdc54dac14d7
Summary:
Fixes https://github.com/facebook/rocksdb/issues/9339
When writing SST file, the name, computed as `prefix_extractor->GetId()` will be written to the properties block.
When the SST is opened again in the future, `CreateFromString()` will take the name as argument and try
to create a prefix extractor object. Without this fix, the C API will pass a `Wrapper` pointer to the underlying
DB's `prefix_extractor`. `Wrapper::GetId()`, in this case, will be missing the prefix length component, causing a
prefix extractor of length 0 to be silently created and used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9343
Test Plan:
```
make c_test
./c_test
```
Reviewed By: mrambacher
Differential Revision: D33355549
Pulled By: riversand963
fbshipit-source-id: c92c3acd8be262c3bff8794b4229e42b9ee31203
Summary:
This option causes trace records to be written in the serialized write thread. That way, the write records in the trace must follow the same order as writes that are logged to WAL and writes that are applied to the DB.
By default I left it disabled to match existing behavior. I enabled it in `db_stress`, though, as that use case requires order of write records in trace matches the order in WAL.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9334
Test Plan:
- See if below unsynced data loss crash test can run for 24h straight. It used to crash after a few hours when reaching an unlucky trace ordering.
```
DEBUG_LEVEL=0 TEST_TMPDIR=/dev/shm /usr/local/bin/python3 -u tools/db_crashtest.py blackbox --interval=10 --max_key=100000 --write_buffer_size=524288 --target_file_size_base=524288 --max_bytes_for_level_base=2097152 --value_size_mult=33 --sync_fault_injection=1 --test_batches_snapshots=0 --duration=86400
```
Reviewed By: zhichao-cao
Differential Revision: D33301990
Pulled By: ajkr
fbshipit-source-id: 82d97559727adb4462a7af69758449c8725b22d3
Summary:
As (https://github.com/facebook/rocksdb/issues/9210) discussed, the **full_history_ts_low** is a member of CompactRangeOptions currently, which means a CF's fullHistoryTsLow is advanced only when users submit a CompactRange request.
However, users may want to advance the fllHistoryTsLow without an immediate compact.
This merge make IncreaseFullHistoryTsLow to a public API so users can advance each CF's fullHistoryTsLow seperately.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9221
Reviewed By: akankshamahajan15
Differential Revision: D33201106
Pulled By: riversand963
fbshipit-source-id: 9cb1d013ba93260f72e16353e693ffee167b47ee
Summary:
The failure looked like this:
```
utilities/backupable/backupable_db_test.cc:3161: Failure
Value of: db_chroot_env_->FileExists(prev_manifest_path).IsNotFound()
Actual: false
Expected: true
```
The failure could be coerced consistently with the following patch:
```
diff --git a/db/db_impl/db_impl_compaction_flush.cc b/db/db_impl/db_impl_compaction_flush.cc
index 80410f671..637636791 100644
--- a/db/db_impl/db_impl_compaction_flush.cc
+++ b/db/db_impl/db_impl_compaction_flush.cc
@@ -2772,6 +2772,8 @@ void DBImpl::BackgroundCallFlush(Env::Priority thread_pri) {
if (job_context.HaveSomethingToClean() ||
job_context.HaveSomethingToDelete() || !log_buffer.IsEmpty()) {
mutex_.Unlock();
+ bg_cv_.SignalAll();
+ sleep(1);
TEST_SYNC_POINT("DBImpl::BackgroundCallFlush:FilesFound");
// Have to flush the info logs before bg_flush_scheduled_--
// because if bg_flush_scheduled_ becomes 0 and the lock is
```
The cause was a familiar problem, which is manual flush/compaction may
return before files they obsoleted are removed. The solution is just to
wait for "scheduled" work to complete, which includes all phases
including cleanup.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9327
Test Plan:
after this PR, even the above patch to coerce the bug cannot
cause the test to fail.
Reviewed By: riversand963
Differential Revision: D33252208
Pulled By: ajkr
fbshipit-source-id: 720a7eaca58c7247d221911fffe3d5e1dbf581e9
Summary:
Fixes a problem where the iterator for metadata was being treated as a non-user key when in fact it was a user key. This led to a problem where the property keys could not be searched for correctly.
The main exposure of this problem was that the HashIndexReader could not get the "prefixes" property correctly, resulting in the failure of retrieval/creation of the BlockPrefixIndex.
Added BlockBasedTableTest.SeekMetaBlocks test to validate this condition.
Fixing this condition exposed two other tests (SeekWithPrefixLongerThanKey, MultiGetPrefixFilter) that passed incorrectly previously and now failed. Updated those two tests to pass. Not sure if the tests are functionally correct/still appropriate, but made them pass...
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8692
Reviewed By: riversand963
Differential Revision: D33119539
Pulled By: mrambacher
fbshipit-source-id: 658969fe9265f73dc184dab97cc3f4eaed2d881a
Summary:
We saw the below assertion failure in `error_handler_fs_test`:
```
db/error_handler_fs_test.cc:2471: Failure
Expected equality of these values:
listener->new_bg_error()
Which is: 16-byte object <00-00 00-00 00-00 00-00 00-00 00-00 00-00 00-00>
Status::Aborted()
Which is: 16-byte object <0A-00 00-00 60-61 00-00 00-00 00-00 00-00 00-00>
terminate called after throwing an instance of 'testing::internal::GoogleTestFailureException'
what(): db/error_handler_fs_test.cc:2471: Failure
Expected equality of these values:
listener->new_bg_error()
Which is: 16-byte object <00-00 00-00 00-00 00-00 00-00 00-00 00-00 00-00>
Status::Aborted()
Which is: 16-byte object <0A-00 00-00 60-61 00-00 00-00 00-00 00-00 00-00>
Received signal 6 (Aborted)
```
The problem was completing `OnErrorRecoveryCompleted()` would
wake up the main thread and allow it to proceed to that assertion. But
that assertion assumes `OnErrorRecoveryEnd()` has completed since
only `OnErrorRecoveryEnd()` affects `new_bg_error()`.
The fix is just to make `OnErrorRecoveryCompleted()` not wake up the
main thread, by means of not implementing it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9325
Test Plan:
- ran `while TEST_TMPDIR=/dev/shm ./error_handler_fs_test ; do : ; done` for a while
- injected sleep between `OnErrorRecovery{Completed,End}()` callbacks, which guaranteed repro before this PR
Reviewed By: anand1976
Differential Revision: D33249200
Pulled By: ajkr
fbshipit-source-id: 1659ee183cd09f90d4dbd898f65103473fcf84a8
Summary:
- Make MemoryAllocator and its implementations into a Customizable class.
- Added a "DefaultMemoryAllocator" which uses new and delete
- Added a "CountedMemoryAllocator" that counts the number of allocs and free
- Updated the existing tests to use these new allocators
- Changed the memkind allocator test into a generic test that can test the various allocators.
- Added tests for creating all of the allocators
- Added tests to verify/create the JemallocNodumpAllocator using its options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8980
Reviewed By: zhichao-cao
Differential Revision: D32990403
Pulled By: mrambacher
fbshipit-source-id: 6fdfe8218c10dd8dfef34344a08201be1fa95c76
Summary:
This change standardizes on a new 16-byte cache key format for
block cache (incl compressed and secondary) and persistent cache (but
not table cache and row cache).
The goal is a really fast cache key with practically ideal stability and
uniqueness properties without external dependencies (e.g. from FileSystem).
A fixed key size of 16 bytes should enable future optimizations to the
concurrent hash table for block cache, which is a heavy CPU user /
bottleneck, but there appears to be measurable performance improvement
even with no changes to LRUCache.
This change replaces a lot of disjointed and ugly code handling cache
keys with calls to a simple, clean new internal API (cache_key.h).
(Preserving the old cache key logic under an option would be very ugly
and likely negate the performance gain of the new approach. Complete
replacement carries some inherent risk, but I think that's acceptable
with sufficient analysis and testing.)
The scheme for encoding new cache keys is complicated but explained
in cache_key.cc.
Also: EndianSwapValue is moved to math.h to be next to other bit
operations. (Explains some new include "math.h".) ReverseBits operation
added and unit tests added to hash_test for both.
Fixes https://github.com/facebook/rocksdb/issues/7405 (presuming a root cause)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9126
Test Plan:
### Basic correctness
Several tests needed updates to work with the new functionality, mostly
because we are no longer relying on filesystem for stable cache keys
so table builders & readers need more context info to agree on cache
keys. This functionality is so core, a huge number of existing tests
exercise the cache key functionality.
### Performance
Create db with
`TEST_TMPDIR=/dev/shm ./db_bench -bloom_bits=10 -benchmarks=fillrandom -num=3000000 -partition_index_and_filters`
And test performance with
`TEST_TMPDIR=/dev/shm ./db_bench -readonly -use_existing_db -bloom_bits=10 -benchmarks=readrandom -num=3000000 -duration=30 -cache_index_and_filter_blocks -cache_size=250000 -threads=4`
using DEBUG_LEVEL=0 and simultaneous before & after runs.
Before ops/sec, avg over 100 runs: 121924
After ops/sec, avg over 100 runs: 125385 (+2.8%)
### Collision probability
I have built a tool, ./cache_bench -stress_cache_key to broadly simulate host-wide cache activity
over many months, by making some pessimistic simplifying assumptions:
* Every generated file has a cache entry for every byte offset in the file (contiguous range of cache keys)
* All of every file is cached for its entire lifetime
We use a simple table with skewed address assignment and replacement on address collision
to simulate files coming & going, with quite a variance (super-Poisson) in ages. Some output
with `./cache_bench -stress_cache_key -sck_keep_bits=40`:
```
Total cache or DBs size: 32TiB Writing 925.926 MiB/s or 76.2939TiB/day
Multiply by 9.22337e+18 to correct for simulation losses (but still assume whole file cached)
```
These come from default settings of 2.5M files per day of 32 MB each, and
`-sck_keep_bits=40` means that to represent a single file, we are only keeping 40 bits of
the 128-bit cache key. With file size of 2\*\*25 contiguous keys (pessimistic), our simulation
is about 2\*\*(128-40-25) or about 9 billion billion times more prone to collision than reality.
More default assumptions, relatively pessimistic:
* 100 DBs in same process (doesn't matter much)
* Re-open DB in same process (new session ID related to old session ID) on average
every 100 files generated
* Restart process (all new session IDs unrelated to old) 24 times per day
After enough data, we get a result at the end:
```
(keep 40 bits) 17 collisions after 2 x 90 days, est 10.5882 days between (9.76592e+19 corrected)
```
If we believe the (pessimistic) simulation and the mathematical generalization, we would need to run a billion machines all for 97 billion days to expect a cache key collision. To help verify that our generalization ("corrected") is robust, we can make our simulation more precise with `-sck_keep_bits=41` and `42`, which takes more running time to get enough data:
```
(keep 41 bits) 16 collisions after 4 x 90 days, est 22.5 days between (1.03763e+20 corrected)
(keep 42 bits) 19 collisions after 10 x 90 days, est 47.3684 days between (1.09224e+20 corrected)
```
The generalized prediction still holds. With the `-sck_randomize` option, we can see that we are beating "random" cache keys (except offsets still non-randomized) by a modest amount (roughly 20x less collision prone than random), which should make us reasonably comfortable even in "degenerate" cases:
```
197 collisions after 1 x 90 days, est 0.456853 days between (4.21372e+18 corrected)
```
I've run other tests to validate other conditions behave as expected, never behaving "worse than random" unless we start chopping off structured data.
Reviewed By: zhichao-cao
Differential Revision: D33171746
Pulled By: pdillinger
fbshipit-source-id: f16a57e369ed37be5e7e33525ace848d0537c88f
Summary:
`db_stress` is a user of `FaultInjectionTestFS`. After injecting a write error, `db_stress` probabilistically determins
data drop (https://github.com/facebook/rocksdb/blob/6.27.fb/db_stress_tool/db_stress_test_base.cc#L2615:L2619).
In some of our recent runs of `db_stress`, we found duplicate trailing entries corresponding to file trivial move in
the MANIFEST, causing the recovery to fail, because the file move operation is not idempotent: you cannot delete a
file from a given level twice.
Investigation suggests that data buffering in both `WritableFileWriter` and `FaultInjectionTestFS` may be the root cause.
WritableFileWriter buffers data to write in a memory buffer, `WritableFileWriter::buf_`. After each
`WriteBuffered()`/`WriteBufferedWithChecksum()` succeeds, the `buf_` is cleared.
If the underlying file `WritableFileWriter::writable_file_` is opened in buffered IO mode, then `FaultInjectionTestFS`
buffers data written for each file until next file sync. After an injected error, user of `FaultInjectionFS` can
choose to drop some or none of previously buffered data. If `db_stress` does not drop any unsynced data, then
such data will still exist in the `FaultInjectionTestFS`'s buffer.
Existing implementation of `WritableileWriter::WriteBuffered()` does not clear `buf_` if there is an error. This may lead
to the data being buffered two copies: one in `WritableFileWriter`, and another in `FaultInjectionTestFS`.
We also know that the `WritableFileWriter` of MANIFEST file will close upon an error. During `Close()`, it will flush the
content in `buf_`. If no write error is injected to `FaultInjectionTestFS` this time, then we end up with two copies of the
data appended to the file.
To fix, we clear the `WritableFileWriter::buf_` upon failure as well. We focus this PR on files opened in non-direct mode.
This PR includes a unit test to reproduce a case when write error injection
to `WritableFile` can cause duplicate trailing entries.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9236
Test Plan: make check
Reviewed By: zhichao-cao
Differential Revision: D33033984
Pulled By: riversand963
fbshipit-source-id: ebfa5a0db8cbf1ed73100528b34fcba543c5db31
Summary:
CompactRange() only waits for manual.done to be set
which happens as soon as new version is installed. Added TEST_WaitForCompact() which
waits for compaction thread to actually finish which is after
PurgeObsoleteFiles().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9287
Test Plan: Reproducible by adding `bg_cv_.SignalAll();` inside if condition 297d913275/db/db_impl/db_impl_compaction_flush.cc (L2876)
Reviewed By: ajkr
Differential Revision: D33051122
Pulled By: akankshamahajan15
fbshipit-source-id: cd793c79efb8cf8587faaf89f7c51f5d8e5bb71d
Summary:
As title, Closes https://github.com/facebook/rocksdb/issues/9272
Since TimestampAssigner-related classes needs to access
`WriteBatch::ProtectionInfo` objects which is for internal use only,
it's difficult to make `AssignTimestamp` methods a template and put them
in the same public header, `include/rocksdb/write_batch.h`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9278
Test Plan:
```
make check
# Also manually test following the repro-steps in issue 9272
```
Reviewed By: ltamasi
Differential Revision: D33012686
Pulled By: riversand963
fbshipit-source-id: 89f24a86a1170125bd0b94ef3b32e69aa08bd949
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9266
This diff adds a new tag `CommitWithTimestamp`. Currently, there is no API to trigger writing
this tag to WAL, thus it is unavailable to users.
This is an ongoing effort to add user-defined timestamp support to write-committed transactions.
This diff also indicates all column families that may potentially participate in the same
transaction must either disable timestamp or have the same timestamp format, since
`CommitWithTimestamp` tag is followed by a single byte-array denoting the commit
timestamp of the transaction. We will enforce this checking in a future diff. We keep this
diff small.
Reviewed By: ltamasi
Differential Revision: D31721350
fbshipit-source-id: e1450811443647feb6ca01adec4c8aaae270ffc6
Summary:
I'm working on a new format_version=6 to support context
checksum (https://github.com/facebook/rocksdb/issues/9058) and this includes much of the refactoring and test
updates to support that change.
Test coverage data and manual inspection agree on dead code in
block_based_table_reader.cc (removed).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9240
Test Plan:
tests enhanced to cover more cases etc.
Extreme case performance testing indicates small % regression in fillseq (w/ compaction), though CPU profile etc. doesn't suggest any explanation. There is enhanced correctness checking in Footer::DecodeFrom, but this should be negligible.
TEST_TMPDIR=/dev/shm/ ./db_bench -benchmarks=fillseq -memtablerep=vector -allow_concurrent_memtable_write=false -num=30000000 -checksum_type=1 --disable_wal={false,true}
(Each is ops/s averaged over 50 runs, run simultaneously with competing configuration for load fairness)
Before w/ wal: 454512
After w/ wal: 444820 (-2.1%)
Before w/o wal: 1004560
After w/o wal: 998897 (-0.6%)
Since this doesn't modify WAL code, one would expect real effects to be larger in w/o wal case.
This regression will be corrected in a follow-up PR.
Reviewed By: ajkr
Differential Revision: D32813769
Pulled By: pdillinger
fbshipit-source-id: 444a244eabf3825cd329b7d1b150cddce320862f
Summary:
If ignore_unsupported_options=true, then it is possible for MemTableRepFactory::CreateFromString to succeed without setting a result (result=nullptr). This would cause the original value to be overwritten with null and an error would be raised later when PrepareOptions is invoked.
Added unit test for this condition. Will add (in another PR unless required by reviewers) comparable tests for all of the other Customizable classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9273
Reviewed By: ltamasi
Differential Revision: D32990365
Pulled By: mrambacher
fbshipit-source-id: b150724c3f5ae7346357b3866244fd93466875c7
Summary:
Previously, the OnErrorRecoveryCompleted callback was called when
RocksDB was able to successfully recover from a retryable error.
However, if the recovery failed and was eventually stopped, there was no
indication of the status. To fix that, a new OnErrorRecoveryEnd callback
is introduced that deprecates the OnErrorRecoveryCompleted callback. The
new callback is called with the original error and the new error status.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9244
Test Plan: Add a new unit test in error_handler_fs_test
Reviewed By: zhichao-cao
Differential Revision: D32922303
Pulled By: anand1976
fbshipit-source-id: f04e77a9cb92c5ea6385590682d3fcf559971b99
Summary:
When table_options.prepopulate_block_cache is set to
BlockBasedTableOptions::PrepopulateBlockCache::kFlushOnly and
table_options.partition_filters is also set true, then there is
segmentation failure when top level filter is fetched because its
entered with wrong type in cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9263
Test Plan:
Updated unit tests;
Ran db_stress: make crash_test -j32
Reviewed By: pdillinger
Differential Revision: D32936566
Pulled By: akankshamahajan15
fbshipit-source-id: 8bd79e53830d3e3c1bb79787e1ffbc3cb46d4426
Summary:
This test case seems to be occasionally failing due to the code hitting
the immediate deletion branch in `DeleteScheduler::DeleteFile`. The
patch increases the allowed trash ratio to a huge value to prevent this
from happening.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9269
Test Plan:
```
gtest-parallel --repeat=10000 ./db_sst_test --gtest_filter=DBSSTTest.DestroyDBWithRateLimitedDelete
```
Reviewed By: akankshamahajan15
Differential Revision: D32956596
Pulled By: ltamasi
fbshipit-source-id: 3945e7c1c19ede76698e03c3f133bc1d9fd61b84
Summary:
Fix a bug that causes file temperature not preserved after DB is restarted, or options.max_manifest_file_size is hit.
Also, pass temperature information to NewRandomAccessFile() to allow users to hack a solution where they don't preserve tiering information.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9242
Test Plan: Add a unit test that would fail without the fix.
Reviewed By: jay-zhuang
Differential Revision: D32818150
fbshipit-source-id: 36aa3f148c60107f7b8e9d65b63b039f9e1a1eec
Summary:
When using the SST file manager, the actual deletion of DB files
potentially occurs in the background. The patch adds another call
to `SstFileManagerImpl::WaitForEmptyTrash` to the test case
`DBSSTTest.DBWithSFMForBlobFilesAtomicFlush` to ensure the deletions
are performed before the test checks the number of deleted files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9241
Test Plan:
```
gtest-parallel --repeat=1000 ./db_sst_test --gtest_filter=DBSSTTest.DBWithSFMForBlobFilesAtomicFlush
```
Reviewed By: akankshamahajan15
Differential Revision: D32811427
Pulled By: ltamasi
fbshipit-source-id: 7f2ad649a22bd2d7900e5f132372034093cfcf47
Summary:
**Context:**
Searching `TableProperties::properties_offsets` across the codebase reveals that internally it is only used to find the external SST file's global seqno offeset. Therefore we can narrow it down and replace this map property with a uint64_t property `external_sst_file_global_seqno_offset` to save memory usage related to table properties.
Note:
- See PR comments for discussion about potential impact on existing external usage of `TableProperties::properties_offsets`
- See PR comments for discussion on keeping external SST file global seqno's offset VS using a simple flag indicating seqno's existence.
**Summary:**
- Replaced `TableProperties::properties_offsets` with `TableProperties::external_sst_file_global_seqno_offset`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9212
Test Plan: - Relied on existing tests should be sufficient since `TableProperties::properties_offsets` existed before and should already be tested.
Reviewed By: ajkr
Differential Revision: D32665941
Pulled By: hx235
fbshipit-source-id: 718e44617346dc4f3b1276ee953e61c196277795
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9205
Update WriteBatch::AssignTimestamp() APIs so that they take an
additional argument, i.e. a function object called `checker` indicating the user-specified logic of performing
checks on timestamp sizes.
WriteBatch is a building block used by multiple other RocksDB components, each of which may track
timestamp information in different data structures. For example, transaction can either write to
`WriteBatchWithIndex` which is a `WriteBatch` with index, or write directly to raw `WriteBatch` if
`Transaction::DisableIndexing()` is called.
`WriteBatchWithIndex` keeps mapping from column family id to comparator, and transaction needs
to keep similar information for the `WriteBatch` if user calls `Transaction::DisableIndexing()` (dynamically)
so that we will know the size of each timestamp later. The bookkeeping info maintained by `WriteBatchWithIndex`
and `Transaction` should not overlap.
When we later call `WriteBatch::AssignTimestamp()`, we need to use these data structures to guarantee
that we do not accidentally assign timestamps for keys from column families that disable timestamp.
Reviewed By: ltamasi
Differential Revision: D31735186
fbshipit-source-id: 8b1709ed880ac72f995aa9e012e5873b290840a7
Summary:
Extend C API to add new function `rocksdb_livefiles_column_family_name`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9232
Reviewed By: akankshamahajan15
Differential Revision: D32736516
Pulled By: ajkr
fbshipit-source-id: a854256a0f4652c903ab5ad8355ded051ac19987
Summary:
https://github.com/facebook/rocksdb/issues/9026 fixed histogram NUM_FILES_IN_SINGLE_COMPACTION for level compaction, but missed fix for universal compaction.
This PR fixed NUM_FILES_IN_SINGLE_COMPACTION for universal compaction.
Quote from https://github.com/facebook/rocksdb/issues/9026:
> currently histogram `NUM_FILES_IN_SINGLE_COMPACTION` just counted files in first level of compaction input, this fix counts files in all levels of compaction input.
Thanks for ajkr pointed this missed fix!
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9168
Reviewed By: akankshamahajan15
Differential Revision: D32434494
Pulled By: ajkr
fbshipit-source-id: 93ea092af4afbd8dce67898ffb350cf26b065ed2
Summary:
Saw error like this:
`Backup failed -- IO error: No such file or directory: While opening a
file for sequentially reading:
/dev/shm/rocksdb/rocksdb_crashtest_blackbox/004426.log: No such file or
directory`
Unfortunately, GetSortedWalFiles (used by Backups, Checkpoint, etc.)
relies on no file deletions happening while its operating, which
means not only disabling (more) deletions, but ensuring any pending
deletions are completed. Two fixes related to this:
* There was a gap in several places between decrementing
pending_purge_obsolete_files_ and incrementing bg_purge_scheduled_ where
the db mutex would be released and GetSortedWalFiles (and others) could
get false information that no deletions are pending.
* The fix to https://github.com/facebook/rocksdb/issues/8591 (disabling deletions in GetSortedWalFiles) seems
incomplete because it doesn't prevent pending deletions from occuring
during the operation (if deletions not already disabled, the case that
was to be fixed by the change).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9208
Test Plan:
existing tests (it's hard to write a test for interleavings
that are now excluded - this is what stress test is for)
Reviewed By: ajkr
Differential Revision: D32630675
Pulled By: pdillinger
fbshipit-source-id: a121e3da648de130cd24d44c524232f4eb22f178
Summary:
Printing file checksum (usually an integer) in non-hex format is barely useful. To make the matter
worse, it can mess with the output format. If you use `less` to redirect the output of `ldb manifest_dump`,
non-hex file checksum can cause `less` not to function as expected.
Also output some additional fields to json output.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9196
Test Plan: manually test `ldb manifest_dump`.
Reviewed By: ajkr
Differential Revision: D32590253
Pulled By: riversand963
fbshipit-source-id: de434b7e60dd05b0b7cb76eff2240b21f9ae4b32
Summary:
Original unit test fail to test the case of multi-cf mode switching to new manifest. The assertion
failure will trigger when the primary instance reopens and secondary continues to tail the
newly-created MANIFEST. Fix the assertion failure and update existing unit tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9143
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D32574233
Pulled By: riversand963
fbshipit-source-id: 857ddbe994019091276458abebcf8e2b65340468
Summary:
The patch adds a new BlobDB configuration option `blob_compaction_readahead_size`
that can be used to enable prefetching data from blob files during compaction.
This is important when using storage with higher latencies like HDDs or remote filesystems.
If enabled, prefetching is used for all cases when blobs are read during compaction,
namely garbage collection, compaction filters (when the existing value has to be read from
a blob file), and `Merge` (when the value of the base `Put` is stored in a blob file).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9187
Test Plan: Ran `make check` and the stress/crash test.
Reviewed By: riversand963
Differential Revision: D32565512
Pulled By: ltamasi
fbshipit-source-id: 87be9cebc3aa01cc227bec6b5f64d827b8164f5d
