Summary:
We were removing the file from `log_recycle_files_` before renaming it
with `ReuseWritableFile()`. Since `ReuseWritableFile()` occurs outside
the DB mutex, it was possible for a concurrent full purge to sneak in
and delete the file before it could be renamed. Consequently, `SwitchMemtable()`
would fail and the DB would enter read-only mode.
The fix is to hold the old file number in `log_recycle_files_` until
after the file has been renamed. Full purge uses that list to decide
which files to keep, so it can no longer delete a file pending recycling.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5900
Test Plan: new unit test
Differential Revision: D19771719
Pulled By: ajkr
fbshipit-source-id: 094346349ca3fb499712e62de03905acc30b5ce8
Summary:
Previously, when recovering version set, LoadTableHandlers failures are ignored.
If paranoid_checks is true, this failure should not be ignored, otherwise, the opened db might be in an inconsistent state.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6368
Test Plan: make check
Differential Revision: D19713459
Pulled By: cheng-chang
fbshipit-source-id: 68cb94f4f2cc43f8b024b14755193cd45cfcad55
Summary:
During recovery, multiple (un)prepared batches could exist in the same WAL record due to group commit. This breaks an assertion in `MemTableInserter::MarkBeginPrepare`.
To fix, reset unprepared_batch_ to false after `MarkEndPrepare`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6419
Differential Revision: D19896148
Pulled By: lth
fbshipit-source-id: b1a32ef88f775a0881264a18bd1a4a5b8c85eee3
Summary:
A recent fix related to 2pc https://github.com/facebook/rocksdb/pull/6313/ writes something to WAL, but does not flush or sync. This causes assertion failure "impl->TEST_WALBufferIsEmpty()" if manual_wal_flush = true. We should fsync the entry to make sure a second power reset can recover.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6417
Test Plan: Add manual_wal_flush=true case in TransactionTest.DoubleCrashInRecovery and fix a bug in the test so that the bug can be reproduced. It passes with the fix.
Differential Revision: D19894537
fbshipit-source-id: f1e84e49e2269f583c6019743118292cd8b6598e
Summary:
It's observed on Windows DestroyDB failed to remove the log file because the logger is still alive in sst file manager and holding a handle to the log file. This fix makes sure the logger is released before attempt to clear the database directory.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6308
Differential Revision: D19818829
Pulled By: riversand963
fbshipit-source-id: 54c3e6859aadaaba4a49b3e851b73dc35ec7dc6a
Summary:
Seems like this caused the following test failure on AppVeyor:
DBTest2.CrashInRecoveryMultipleCF
c:\projects\rocksdb\db\db_test_util.cc(107): error: DestroyDB(dbname_, options)
IO error: Failed to delete: C:\projects\rocksdb\db_tests\\testrocksdb-3112//db_test2_10791409581227174103/000013.sst: Access is denied.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6410
Test Plan: Wait to see whether the AppVeyor test passes.
Differential Revision: D19879872
Pulled By: cheng-chang
fbshipit-source-id: 59a9c55ca88566e9210c0b715ecc45a4fd9afe26
Summary:
Unrevert the previous fix to propagate error status, and an additional fix to not treat a memtable lookup MergeInProgress status as an error.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6403
Test Plan:
Unit tests
Tried running stress tests but couldn't repro the stress failure
Differential Revision: D19846721
Pulled By: anand1976
fbshipit-source-id: 7db10cccbdc863d9b559497f0a46b608d2488ca4
Summary:
This reverts commit d70011bccc. The commit is causing some stress test failure due to unexpected Status::MergeInProgress() return for some keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6401
Differential Revision: D19826623
Pulled By: anand1976
fbshipit-source-id: edd634cede9cb7bdd2cb8f46e662ea709b16d2f1
Summary:
Add a utility class `Defer` to defer the execution of a function until the Defer object goes out of scope.
Used in VersionSet:: ProcessManifestWrites as an example.
The inline comments for class `Defer` have more details.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6382
Test Plan: `make defer_test version_set_test && ./defer_test && ./version_set_test`
Differential Revision: D19797538
Pulled By: cheng-chang
fbshipit-source-id: b1a9b7306e4fd4f48ec2ab55783caa561a315f0f
Summary:
https://github.com/facebook/rocksdb/pull/6383 surfaced an issue with
`VersionSet`/`ReactiveVersionSet` and `AtomicGroupReadBuffer::AddEdit`
(which was added in https://github.com/facebook/rocksdb/pull/5411):
`AddEdit` moves the `VersionEdit` passed to it into `replay_buffer_`,
however, the client `VersionSet` classes keep using it afterwards. This
*seemed to* work before the refactoring but it really did not: since
`VersionEdit` used to have a user-declared destructor, no move
constructor/move assignment operator was generated, and the `move` in
`AddEdit` was really a copy. The patch makes the copy explicit. Note: it
should be possible to rework this logic so that we can get away
with the move but for now, this should fix the issue.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6400
Test Plan:
`make check`
`make analyze`
Differential Revision: D19824466
Pulled By: ltamasi
fbshipit-source-id: f38033967daf2a39c78dcd6e12978bafe37632b4
Summary:
In the current code base, RocksDB generate the checksum for each block and verify the checksum at usage. Current PR enable SST file checksum. After a SST file is generated by Flush or Compaction, RocksDB generate the SST file checksum and store the checksum value and checksum method name in the vs_info and MANIFEST as part for the FileMetadata.
Added the enable_sst_file_checksum to Options to enable or disable file checksum. Added sst_file_checksum to Options such that user can plugin their own SST file checksum calculate method via overriding the SstFileChecksum class. The checksum information inlcuding uint32_t checksum value and a checksum name (string). A new tool is added to LDB such that user can dump out a list of file checksum information from MANIFEST. If user enables the file checksum but does not provide the sst_file_checksum instance, RocksDB will use the default crc32checksum implemented in table/sst_file_checksum_crc32c.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6216
Test Plan: Added the testing case in table_test and ldb_cmd_test to verify checksum is correct in different level. Pass make asan_check.
Differential Revision: D19171461
Pulled By: zhichao-cao
fbshipit-source-id: b2e53479eefc5bb0437189eaa1941670e5ba8b87
Summary:
When `no_slowdown` is enabled, it returns `Status::Incomplete("Write stall")` if a stall would occur. This patch adds descriptive text for when `no_slowdown` and `low_pri` are enabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6396
Differential Revision: D19808978
Pulled By: cheng-chang
fbshipit-source-id: a53b0d25ed414c821a086531e0222027f925e627
Summary:
Currently, any IO errors and checksum mismatches while reading data
blocks, are being ignored by the batched MultiGet. Its only looking at
the GetContext state. Fix that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6387
Test Plan: Add unit tests
Differential Revision: D19799819
Pulled By: anand1976
fbshipit-source-id: 46133dccbb04e64067b9fe6cda73e282203db969
Summary:
Fixed an error when compiled with -Og:
db/write_thread.cc:183:14: error: 'state' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6275
Differential Revision: D19381755
fbshipit-source-id: a90bf3cd4a7248d9d71219e918fc6253deb97e3c
Summary:
This is a bunch of small improvements to `VersionEdit`. Namely, the patch
* Makes the names and order of variables, methods, and code chunks related
to the various information elements more consistent, and adds missing
getters for the sake of completeness.
* Initializes previously uninitialized stack variables.
* Marks all getters const to improve const correctness.
* Adds in-class initializers and removes the default ctor that would
create an object with uninitialized built-in fields and call `Clear`
afterwards.
* Adds a new type alias for new files and changes the existing `typedef`
for deleted files into a type alias as well.
* Makes the helper method `DecodeNewFile4From` private.
* Switches from long-winded iterator syntax to range based loops in a
couple of places.
* Fixes a couple of assignments where an integer 0 was assigned to
boolean members.
* Fixes a getter which used to return a `const std::string` instead of
the intended `const std::string&`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6383
Test Plan: make check
Differential Revision: D19780537
Pulled By: ltamasi
fbshipit-source-id: b0b4f09fee0ec0e7c7b7a6d76bfe5346e91824d0
Summary:
Since the logic for handling IDENTITY file is now inside `NewDB`, the comment above `NewDB` is no longer relevant.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6379
Test Plan: not needed
Differential Revision: D19795440
Pulled By: cheng-chang
fbshipit-source-id: 0b1cca87ac6d92474701c46aa4c8d4d708bfa19b
Summary:
Several statuses were not checked during DB::Open.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6380
Test Plan: make check
Differential Revision: D19780237
Pulled By: cheng-chang
fbshipit-source-id: c8d189d20344bd1607890dd1449345bda2ef96b9
Summary:
Before this fix, atomic flush codepath may hit an assertion failure on a specific failure case.
If all flush jobs within an atomic flush succeed (they do not write to MANIFEST), but batch writing version edits to MANIFEST fails, then `cfd->imm()->RollbackMemTableFlush()` will be called twice, and the second invocation hits assertion failure `assert(m->flush_in_progress_)` since the first invocation resets the variable `flush_in_progress_` to false already.
Test plan (dev server):
```
./db_flush_test --gtest_filter=DBAtomicFlushTest/DBAtomicFlushTest.RollbackAfterFailToInstallResults
make check
```
Both must succeed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6385
Differential Revision: D19782943
Pulled By: riversand963
fbshipit-source-id: 84e1592625e729d1b70fdc8479959387a74cb121
Summary:
In `DBSSTTest.SSTsWithLdbSuffixHandling`, some sst files are renamed to ldb files, the original intention of the test is to test that the ldb files can be loaded along with the sst files.
The original test checks this by `ASSERT_NE("NOT_FOUND", Get(Key(k)))`, but the problem is `Get(Key(k))` returns IO error due to path not found instead of NOT_FOUND, so the success of ASSERT_NE does not mean the key can be retrieved.
This PR updates the test to make sure Get(Key(k)) returns the original value.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6370
Test Plan: make db_sst_test && ./db_sst_test
Differential Revision: D19726278
Pulled By: cheng-chang
fbshipit-source-id: 993127f56457b315e669af4eeb92d6f956b7a4b7
Summary:
Before this PR it calls GetFileSize() once for each sst file in the DB. This can take a long time if there are be tens of thousands of sst files (e.g. in thousands of column families), and even longer if Env is talking to some remote service rather than local filesystem. This PR makes DB::Open() use sst file sizes that are already known from manifest (typically almost all files in the DB) and only call GetFileSize() for non-sst or obsolete files. Note that GetFileSize() is also called and checked against manifest in CheckConsistency(), so the calls in SstFileManagerImpl were completely redundant.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6363
Test Plan: deployed to a test cluster, looked at a dump of Env calls (from a custom instrumented Env) - no more thousands of GetFileSize()s.
Differential Revision: D19702509
Pulled By: al13n321
fbshipit-source-id: 99f8110620cb2e9d0c092dfcdbb11f3af4ff8b73
Summary:
Right now RocksDB gets manifest file size before recovering from it. The information is available in LogReader. Use it instead to prevent one file system call.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6369
Test Plan: Run all existing tests
Differential Revision: D19714872
fbshipit-source-id: 0144be324d403c99e3da875ea2feccc8f64e883d
Summary:
When paranoid_checks is on, DBImpl::CheckConsistency() iterates over all sst files and calls Env::GetFileSize() for each of them. As far as I could understand, this is pretty arbitrary and doesn't affect correctness - if filesystem doesn't corrupt fsynced files, the file sizes will always match; if it does, it may as well corrupt contents as well as sizes, and rocksdb doesn't check contents on open.
If there are thousands of sst files, getting all their sizes takes a while. If, on top of that, Env is overridden to use some remote storage instead of local filesystem, it can be *really* slow and overload the remote storage service. This PR adds an option to not do GetFileSize(); instead it does GetChildren() for parent directory to check that all the expected sst files are at least present, but doesn't check their sizes.
We can't just disable paranoid_checks instead because paranoid_checks do a few other important things: make the DB read-only on write errors, print error messages on read errors, etc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6353
Test Plan: ran the added sanity check unit test. Will try it out in a LogDevice test cluster where the GetFileSize() calls are causing a lot of trouble.
Differential Revision: D19656425
Pulled By: al13n321
fbshipit-source-id: c2c421b367633033760d1f56747bad206d1fbf82
Summary:
Fix an intermittent failure in
DBErrorHandlingTest.CompactionManifestWriteError due to a race between
background error recovery and the main test thread calling
TEST_WaitForCompact().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6367
Test Plan: Run the test using gtest_parallel
Differential Revision: D19713802
Pulled By: anand1976
fbshipit-source-id: 29e35dc26e0984fe8334c083e059f4fa1f335d68
Summary:
Right now when reading IDENTITY file, we use a very similar logic as ReadFileToString() while it does an extra file size check, which may be expensive in some file systems. There is no reason to duplicate the logic. Use ReadFileToString() instead.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6365
Test Plan: RUn all existing tests.
Differential Revision: D19709399
fbshipit-source-id: 3bac31f3b2471f98a0d2694278b41e9cd34040fe
Summary:
A relatively recent regression causes for every CF, create and open directory is called for the DB directory, unless CF has a private directory. This doesn't scale well with large number of column families.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6358
Test Plan: Run all existing tests and see it pass. strace with db_bench --num_column_families and observe it doesn't open directory for number of column families.
Differential Revision: D19675141
fbshipit-source-id: da01d9216f1dae3f03d4064fbd88ce71245bd9be
Summary:
MultiDBCompactionError fails when it verifies the number of files on level 0 and level 1 without waiting for compaction to finish.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6266
Differential Revision: D19701639
Pulled By: riversand963
fbshipit-source-id: e96d511bcde705075f073e0b550cebcd2ecfccdc
Summary:
DBTest2.ChangePrefixExtractor fails in LITE build because LITE build doesn't support adaptive build. Fix it by removing the stats check but only check correctness.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6356
Test Plan: Run the test with both of LITE and non-LITE build.
Differential Revision: D19669537
fbshipit-source-id: 6d7dd6c8a79f18e80ca1636864b9c71922030d8e
Summary:
Add a unit test for prefix extractor change, including a check that fails due to a bug.
Also comment out the partitioned filter case which will fail the test too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6323
Test Plan: Run the test and it passes (and fails if the SeekForPrev() part is uncommented)
Differential Revision: D19509744
fbshipit-source-id: 678202ca97b5503e9de73b54b90de9e5ba822b72
Summary:
Non-zero recycle_log_file_num is incompatible with kPointInTimeRecovery and kAbsoluteConsistency recovery modes. Currently SanitizeOptions changes the recovery mode to kTolerateCorruptedTailRecords, while to resolve this option conflict it makes more sense to compromise recycle_log_file_num, which is a performance feature, instead of wal_recovery_mode, which is a safety feature.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6351
Differential Revision: D19648931
Pulled By: maysamyabandeh
fbshipit-source-id: dd0bf78349edc007518a00c4d63931fd69294ad7
Summary:
Unit test names, together with other components, are used to create log files
during some internal testing. Overly long names cause infra failure due to file
names being too long.
Look for internal tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6352
Differential Revision: D19649307
Pulled By: riversand963
fbshipit-source-id: 6f29de096e33c0eaa87d9c8702f810eda50059e7
Summary:
Fix for issue https://github.com/facebook/rocksdb/issues/6316
When an append/sync of the manifest file fails due to an IO error such
as NoSpace, we don't always put the DB in read-only mode. This is true
for flush and compactions, as well as foreground operatons such as column family
add/drop, CompactFiles etc. Subsequent changes to the DB will be
recorded in the same manifest file, which would have a corrupted record
in the middle due to the previous failure. On next DB::Open(), it will
fail to process the full manifest and data will be lost.
To fix this, we reset VersionSet::descriptor_log_ on append/sync
failure, which will force a new manifest file to be written on the next
append.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6331
Test Plan: Add new unit tests in error_handler_test.cc
Differential Revision: D19632951
Pulled By: anand1976
fbshipit-source-id: 68d527cb6e59a94cbbbf9f5a17a7f464381d51e3
Summary:
DBTest2.AutoPrefixMode1 doesn't pass because auto prefix mode is not supported there.
Fix it by disabling the test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6346
Test Plan: Run DBTest2.AutoPrefixMode1 in lite mode
Differential Revision: D19627486
fbshipit-source-id: fbde75260aeecb7e6fc406e09c19a71a95aa5f08
Summary:
db_bloom_filter_test break with clang LITE build with following message:
db/db_bloom_filter_test.cc:23:29: error: unused variable 'kPlainTable' [-Werror,-Wunused-const-variable]
static constexpr PseudoMode kPlainTable = -1;
^
Fix it by moving the declaration out of LITE build
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6340
Test Plan:
USE_CLANG=1 LITE=1 make db_bloom_filter_test
and without LITE=1
Differential Revision: D19609834
fbshipit-source-id: 0e88f5c6759238a94f9880d84c785ac18e7cdd7e
Summary:
In WritePrepared there could be gap in sequence numbers. This breaks the trick we use in kPointInTimeRecovery which assume the first seq in the log right after the corrupted log is one larger than the last seq we read from the logs. To let this trick keep working, we add a dummy entry with the expected sequence to the first log right after recovery.
Also in WriteCommitted, if the log right after the corrupted log is empty, since it has no sequence number to let the sequential trick work, it is assumed as unexpected behavior. This is however expected to happen if we close the db after recovering from a corruption and before writing anything new to it. To remedy that, we apply the same technique by writing a dummy entry to the log that is created after the corrupted log.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6313
Differential Revision: D19458291
Pulled By: maysamyabandeh
fbshipit-source-id: 09bc49e574690085df45b034ca863ff315937e2d
Summary:
Add a new option ReadOptions.auto_prefix_mode. When set to true, iterator should return the same result as total order seek, but may choose to do prefix seek internally, based on iterator upper bounds. Also fix two previous bugs when handling prefix extrator changes: (1) reverse iterator should not rely on upper bound to determine prefix. Fix it with skipping prefix check. (2) block-based filter is not handled properly.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6314
Test Plan: (1) add a unit test; (2) add the check to stress test and run see whether it can pass at least one run.
Differential Revision: D19458717
fbshipit-source-id: 51c1bcc5cdd826c2469af201979a39600e779bce
Summary:
./db_compaction_test DBCompactionTest.LevelTtlCascadingCompactions passed 96 / 100 times.
```
With the fix: all runs (tried 100, 1000, 10000) succeed.
```
$ TEST_TMPDIR=/dev/shm ~/gtest-parallel/gtest-parallel ./db_compaction_test --gtest_filter=DBCompactionTest.LevelTtlCascadingCompactions --repeat=1000
[1000/1000] DBCompactionTest.LevelTtlCascadingCompactions (1895 ms)
```
Test Plan:
Build:
```
COMPILE_WITH_TSAN=1 make db_compaction_test -j100
```
Without the fix: a few runs out of 100 fail:
```
$ TEST_TMPDIR=/dev/shm KEEP_DB=1 ~/gtest-parallel/gtest-parallel ./db_compaction_test --gtest_filter=DBCompactionTest.LevelTtlCascadingCompactions --repeat=100
...
...
Note: Google Test filter = DBCompactionTest.LevelTtlCascadingCompactions
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from DBCompactionTest
[ RUN ] DBCompactionTest.LevelTtlCascadingCompactions
db/db_compaction_test.cc:3687: Failure
Expected equality of these values:
oldest_time
Which is: 1580155869
level_to_files[6][0].oldest_ancester_time
Which is: 1580155870
DB is still at /dev/shm//db_compaction_test_6337001442947696266
[ FAILED ] DBCompactionTest.LevelTtlCascadingCompactions (1432 ms)
[----------] 1 test from DBCompactionTest (1432 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (1433 ms total)
[ PASSED ] 0 tests.
[ FAILED ] 1 test, listed below:
[ FAILED ] DBCompactionTest.LevelTtlCascadingCompactions
1 FAILED TEST
[80/100] DBCompactionTest.LevelTtlCascadingCompactions returned/aborted with exit code 1 (1489 ms)
[100/100] DBCompactionTest.LevelTtlCascadingCompactions (1522 ms)
FAILED TESTS (4/100):
1419 ms: ./db_compaction_test DBCompactionTest.LevelTtlCascadingCompactions (try https://github.com/facebook/rocksdb/issues/90)
1434 ms: ./db_compaction_test DBCompactionTest.LevelTtlCascadingCompactions (try https://github.com/facebook/rocksdb/issues/84)
1457 ms: ./db_compaction_test DBCompactionTest.LevelTtlCascadingCompactions (try https://github.com/facebook/rocksdb/issues/82)
1489 ms: ./db_compaction_test DBCompactionTest.LevelTtlCascadingCompactions (try https://github.com/facebook/rocksdb/issues/74)
Differential Revision: D19587040
Pulled By: sagar0
fbshipit-source-id: 11191ae9940837643bff47ebe18b299b4be3d950
Summary:
It chooses the oldest memtable, not the largest one. This is an
important difference for users whose CFs receive non-uniform write
rates.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6335
Differential Revision: D19588865
Pulled By: maysamyabandeh
fbshipit-source-id: 62ad4325b0182f5f27858584cd73fd5978fb2cec
Summary:
https://github.com/facebook/rocksdb/pull/6028 introduces a bug for hash index in SST files. If a table reader is created when total order seek is used, prefix_extractor might be passed into table reader as null. While later when prefix seek is used, the same table reader used, hash index is checked but prefix extractor is null and the program would crash.
Fix the issue by fixing http://github.com/facebook/rocksdb/pull/6028 in the way that prefix_extractor is preserved but ReadOptions.total_order_seek is checked
Also, a null pointer check is added so that a bug like this won't cause segfault in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6328
Test Plan: Add a unit test that would fail without the fix. Stress test that reproduces the crash would pass.
Differential Revision: D19586751
fbshipit-source-id: 8de77690167ddf5a77a01e167cf89430b1bfba42
Summary:
The earlier code used two conflicting definitions for the number of
input records going into a compaction, one based on the
`rocksdb.num.entries` table property and one based on
`CompactionIterationStats`. The first one is correct and in line
with how output records are counted, while the second one incorrectly
ignores input records in various cases when the `CompactionIterator`
advances or reseeks the input iterator (this can happen, amongst other
cases, when dealing with `SingleDelete`s, regular `Delete`s, `Merge`s,
and compaction filters). This can result in the code undercounting the
input records and computing an incorrect value for "records dropped"
during the compaction. The patch fixes this by switching over to the
correct (table property based) input record count for "records dropped".
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6325
Test Plan: Tested using `make check` and `db_bench`.
Differential Revision: D19525491
Pulled By: ltamasi
fbshipit-source-id: 4340b0b2f41546db8e356db70ca02199e48fa636
Summary:
When there is a write stall, the active write group leader calls ```BeginWriteStall()``` to walk the queue of writers and remove any with the ```no_slowdown``` option set. There was a bug in the code which updated the back pointer but not the forward pointer (```link_newer```), corrupting the list and causing some threads to wait forever. This PR fixes it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6322
Test Plan: Add a unit test in db_write_test
Differential Revision: D19538313
Pulled By: anand1976
fbshipit-source-id: 6fbed819e594913f435886606f5d36f74f235c3a
Summary:
This is a simple edit to have two #include file paths be consistent within range_del_aggregator.{h,cc} with everywhere else.
The impact of this inconsistency is that it actual breaks a Bazel based build on the Windows platform. The same pragma once failure occurs with both Windows Visual C++ 2019 and clang for Windows 9.0. Bazel's "sandboxing" of the builds causes both compilers to not properly recognize "rocksdb/types.h" and "include/rocksdb/types.h" to be the same file (also comparator.h). My guess is that the backslash versus forward slash mixing within path names is the underlying issue.
But, everything builds fine once the include paths in these two source files are consistent with the rest of the repository.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6321
Differential Revision: D19506585
Pulled By: ltamasi
fbshipit-source-id: 294c346607edc433ab99eaabc9c880ee7426817a
Summary:
Currently, this test case tries to infer whether
`VersionStorageInfo::UpdateAccumulatedStats` was called during open by
checking the number of files opened against an arbitrary threshold (10).
This makes the test brittle and results in sporadic failures. The patch
changes the test case to use sync points to directly test whether
`UpdateAccumulatedStats` was called.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6306
Test Plan: `make check`
Differential Revision: D19439544
Pulled By: ltamasi
fbshipit-source-id: ceb7adf578222636a0f51740872d0278cd1a914f
Summary:
When we do concurrently writes, and different write operations will have WAL enable or disable.
But the data from write operation with WAL disabled will still be logged into log files, which will lead to extra disk write/sync since we do not want any guarantee for these part of data.
Detail can be found in https://github.com/facebook/rocksdb/issues/6280. This PR avoid mixing the two types in a write group. The advantage is simpler reasoning about the write group content
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6290
Differential Revision: D19448598
Pulled By: maysamyabandeh
fbshipit-source-id: 3d990a0f79a78ea1bfc90773f6ebafc1884c20de
Summary:
This PR adds a `rocksdb_options_set_atomic_flush` function to the C API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6307
Differential Revision: D19451313
Pulled By: ltamasi
fbshipit-source-id: 750495642ef55b1ea7e13477f85c38cd6574849c
Summary:
Recent bug fix related to hash index introduced a new bug: hash index can return NotFound but it is not handled by BlockBasedTable::Get(). The end result is that Get() stops being executed too early. Fix it by ignoring NotFound code in Get().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6305
Test Plan: A problematic DB used to return NotFound incorrectly, and now able to return correct result. Will try to construct a unit test too.0
Differential Revision: D19438925
fbshipit-source-id: e751afa8c13728d56511cfeb1bc811ecb99f3217
Summary:
https://github.com/facebook/rocksdb/pull/2205 introduced a new
configuration option called `max_background_jobs`, superseding the
earlier options `max_background_flushes` and
`max_background_compactions`. However, unlike
`max_background_compactions`, setting `max_background_jobs` dynamically
through the `SetDBOptions` interface does not adjust the size of the
thread pools (see https://github.com/facebook/rocksdb/issues/6298). The
patch fixes this.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6300
Test Plan: Extended unit test.
Differential Revision: D19430899
Pulled By: ltamasi
fbshipit-source-id: 704006605b3c13c3d1b997ccc0831ee369721074
Summary:
Recent fix to Prefix Hash https://github.com/facebook/rocksdb/pull/6292 caused a bug that the newly created NotFound status in hash index is never reset. This causes reseek or implict reseek to return wrong results sometimes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6302
Test Plan:
Add a unit test that would fail. Not fix.
crash test with hash test would fail in several seconds. With the fix, it will run about several minutes before failing with another failure.
Differential Revision: D19424572
fbshipit-source-id: c5276f36a95fd0e2837e30190476d2fe21ed8566
Summary:
When prefix is enabled the expected behavior when the prefix of the target does not exist is for Seek is to seek to any key larger than target and SeekToPrev to any key less than the target.
Currently. the prefix index (kHashSearch) returns OK status but sets Invalid() to indicate two cases: a prefix of the searched key does not exist, ii) the key is beyond the range of the keys in SST file. The SeekForPrev implementation in BlockBasedTable thus does not have enough information to know when it should set the index key to first (to return a key smaller than target). The patch fixes that by returning NotFound status for cases that the prefix does not exist. SeekForPrev in BlockBasedTable accordingly SeekToFirst instead of SeekToLast on the index iterator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6297
Test Plan: SeekForPrev of non-exsiting prefix is added to block_test.cc, and a test case is added in db_test2, which fails without the fix.
Differential Revision: D19404695
fbshipit-source-id: cafbbf95f8f60ff9ede9ccc99d25bfa1cf6fcdc3
Summary:
A recent commit adds a unit test that uses a function not available in LITE build. Fix it by avoiding the call
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6295
Test Plan: Run the test in LITE build and see it passes.
Differential Revision: D19395678
fbshipit-source-id: 37b42835bae02511630d80f7cafb1179401bc033
