Summary:
I noticed ```openat``` system call with ```O_WRONLY``` flag and ```sync_file_range``` and ```truncate``` on WAL file when using ```rocksdb::DB::OpenForReadOnly``` by way of ```db_bench --readonly=true --benchmarks=readseq --use_existing_db=1 --num=1 ...```
Noticed in ```strace``` after seeing the last modification time of the WAL file change after each run (with ```--readonly=true```).
I think introduced by 7d7f14480e from https://github.com/facebook/rocksdb/pull/8122
I added a test to catch the WAL file being truncated and the modification time on it changing.
I am not sure if a mock filesystem with mock clock could be used to avoid having to sleep 1.1s.
The test could also check the set of files is the same and that the sizes are also unchanged.
Before:
```
[ RUN ] DBBasicTest.ReadOnlyReopenMtimeUnchanged
db/db_basic_test.cc:182: Failure
Expected equality of these values:
file_mtime_after_readonly_reopen
Which is: 1621611136
file_mtime_before_readonly_reopen
Which is: 1621611135
file is: 000010.log
[ FAILED ] DBBasicTest.ReadOnlyReopenMtimeUnchanged (1108 ms)
```
After:
```
[ RUN ] DBBasicTest.ReadOnlyReopenMtimeUnchanged
[ OK ] DBBasicTest.ReadOnlyReopenMtimeUnchanged (1108 ms)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8313
Reviewed By: pdillinger
Differential Revision: D28656925
Pulled By: jay-zhuang
fbshipit-source-id: ea9e215cb53e7c830e76bc5fc75c45e21f12a1d6
Summary:
https://github.com/facebook/rocksdb/pull/8288 introduces a bug: SequenceIterWrapper should do next for seek key using internal key comparator rather than user comparator. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8328
Test Plan: Pass all existing tests
Reviewed By: ltamasi
Differential Revision: D28647263
fbshipit-source-id: 4081d684fd8a86d248c485ef8a1563c7af136447
Summary:
Error:
```
db/db_compaction_test.cc:5211:47: warning: The left operand of '*' is a garbage value
uint64_t total = (l1_avg_size + l2_avg_size * 10) * 10;
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8325
Test Plan: `$ make analyze`
Reviewed By: pdillinger
Differential Revision: D28620916
Pulled By: jay-zhuang
fbshipit-source-id: f6d58ab84eefbcc905cda45afb9522b0c6d230f8
Summary:
With Ribbon filter work and possible variance in actual bits
per key (or prefix; general term "entry") to achieve certain FP rates,
I've received a request to be able to track actual bits per key in
generated filters. This change adds a num_filter_entries table
property, which can be combined with filter_size to get bits per key
(entry).
This can vary from num_entries in at least these ways:
* Different versions of same key are only counted once in filters.
* With prefix filters, several user keys map to the same filter entry.
* A single filter can include both prefixes and user keys.
Note that FilterBlockBuilder::NumAdded() didn't do anything useful
except distinguish empty from non-empty.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8323
Test Plan: basic unit test included, others updated
Reviewed By: jay-zhuang
Differential Revision: D28596210
Pulled By: pdillinger
fbshipit-source-id: 529a111f3c84501e5a470bc84705e436ee68c376
Summary:
Fix a bug that for manual compaction, `max_compaction_bytes` is only
limit the SST files from input level, but not overlapped files on output
level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8269
Test Plan: `make check`
Reviewed By: ajkr
Differential Revision: D28231044
Pulled By: jay-zhuang
fbshipit-source-id: 9d7d03004f30cc4b1b9819830141436907554b7c
Summary:
When a memtable is flushed, it will validate number of entries it reads, and compare the number with how many entries inserted into memtable. This serves as one sanity c\
heck against memory corruption. This change will also allow more counters to be added in the future for better validation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8288
Test Plan: Pass all existing tests
Reviewed By: ajkr
Differential Revision: D28369194
fbshipit-source-id: 7ff870380c41eab7f99eee508550dcdce32838ad
Summary:
The test want to make sure these's no compaction during `AddFile`
(between `DBImpl::AddFile:MutexLock` and `DBImpl::AddFile:MutexUnlock`)
but the mutex could be unlocked by `EnterUnbatched()`.
Move the lock start point after bumping the ingest file number.
Also fix the dead lock when ASSERT fails.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8307
Reviewed By: ajkr
Differential Revision: D28479849
Pulled By: jay-zhuang
fbshipit-source-id: b3c50f66aa5d5f59c5c27f815bfea189c4cd06cb
Summary:
This change gathers and publishes statistics about the
kinds of items in block cache. This is especially important for
profiling relative usage of cache by index vs. filter vs. data blocks.
It works by iterating over the cache during periodic stats dump
(InternalStats, stats_dump_period_sec) or on demand when
DB::Get(Map)Property(kBlockCacheEntryStats), except that for
efficiency and sharing among column families, saved data from
the last scan is used when the data is not considered too old.
The new information can be seen in info LOG, for example:
Block cache LRUCache@0x7fca62229330 capacity: 95.37 MB collections: 8 last_copies: 0 last_secs: 0.00178 secs_since: 0
Block cache entry stats(count,size,portion): DataBlock(7092,28.24 MB,29.6136%) FilterBlock(215,867.90 KB,0.888728%) FilterMetaBlock(2,5.31 KB,0.00544%) IndexBlock(217,180.11 KB,0.184432%) WriteBuffer(1,256.00 KB,0.262144%) Misc(1,0.00 KB,0%)
And also through DB::GetProperty and GetMapProperty (here using
ldb just for demonstration):
$ ./ldb --db=/dev/shm/dbbench/ get_property rocksdb.block-cache-entry-stats
rocksdb.block-cache-entry-stats.bytes.data-block: 0
rocksdb.block-cache-entry-stats.bytes.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-block: 0
rocksdb.block-cache-entry-stats.bytes.filter-meta-block: 0
rocksdb.block-cache-entry-stats.bytes.index-block: 178992
rocksdb.block-cache-entry-stats.bytes.misc: 0
rocksdb.block-cache-entry-stats.bytes.other-block: 0
rocksdb.block-cache-entry-stats.bytes.write-buffer: 0
rocksdb.block-cache-entry-stats.capacity: 8388608
rocksdb.block-cache-entry-stats.count.data-block: 0
rocksdb.block-cache-entry-stats.count.deprecated-filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-block: 0
rocksdb.block-cache-entry-stats.count.filter-meta-block: 0
rocksdb.block-cache-entry-stats.count.index-block: 215
rocksdb.block-cache-entry-stats.count.misc: 1
rocksdb.block-cache-entry-stats.count.other-block: 0
rocksdb.block-cache-entry-stats.count.write-buffer: 0
rocksdb.block-cache-entry-stats.id: LRUCache@0x7f3636661290
rocksdb.block-cache-entry-stats.percent.data-block: 0.000000
rocksdb.block-cache-entry-stats.percent.deprecated-filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-block: 0.000000
rocksdb.block-cache-entry-stats.percent.filter-meta-block: 0.000000
rocksdb.block-cache-entry-stats.percent.index-block: 2.133751
rocksdb.block-cache-entry-stats.percent.misc: 0.000000
rocksdb.block-cache-entry-stats.percent.other-block: 0.000000
rocksdb.block-cache-entry-stats.percent.write-buffer: 0.000000
rocksdb.block-cache-entry-stats.secs_for_last_collection: 0.000052
rocksdb.block-cache-entry-stats.secs_since_last_collection: 0
Solution detail - We need some way to flag what kind of blocks each
entry belongs to, preferably without changing the Cache API.
One of the complications is that Cache is a general interface that could
have other users that don't adhere to whichever convention we decide
on for keys and values. Or we would pay for an extra field in the Handle
that would only be used for this purpose.
This change uses a back-door approach, the deleter, to indicate the
"role" of a Cache entry (in addition to the value type, implicitly).
This has the added benefit of ensuring proper code origin whenever we
recognize a particular role for a cache entry; if the entry came from
some other part of the code, it will use an unrecognized deleter, which
we simply attribute to the "Misc" role.
An internal API makes for simple instantiation and automatic
registration of Cache deleters for a given value type and "role".
Another internal API, CacheEntryStatsCollector, solves the problem of
caching the results of a scan and sharing them, to ensure scans are
neither excessive nor redundant so as not to harm Cache performance.
Because code is added to BlocklikeTraits, it is pulled out of
block_based_table_reader.cc into its own file.
This is a reformulation of https://github.com/facebook/rocksdb/issues/8276, without the type checking option
(could still be added), and with actual stat gathering.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8297
Test Plan: manual testing with db_bench, and a couple of basic unit tests
Reviewed By: ltamasi
Differential Revision: D28488721
Pulled By: pdillinger
fbshipit-source-id: 472f524a9691b5afb107934be2d41d84f2b129fb
Summary:
Some file systems (especially distributed FS) do not support reopening a file for writing. The ExternalSstFileIngestionJob calls ReopenWritableFile in order to sync the ingested file, which typically makes sense only on a local file system with a page cache (i.e Posix). So this change tries to sync the ingested file only if ReopenWritableFile doesn't return Status::NotSupported().
Tests:
Add a new unit test in external_sst_file_basic_test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8296
Reviewed By: jay-zhuang
Differential Revision: D28420865
Pulled By: anand1976
fbshipit-source-id: 380e7f5ff95324997f7a59864a9ac96ebbd0100c
Summary:
This patch does two things:
1) Introduces some aliases in order to eliminate/prevent long-winded type names
w/r/t the internal table property collectors (see e.g.
`std::vector<std::unique_ptr<IntTblPropCollectorFactory>>`).
2) Makes it possible to apply only a subrange of table property collectors during
table building by turning `TableBuilderOptions::int_tbl_prop_collector_factories`
from a pointer to a `vector` into a range (i.e. a pair of iterators).
Rationale: I plan to introduce a BlobDB related table property collector, which
should only be applied during table creation if blob storage is enabled at the moment
(which can be changed dynamically). This change will make it possible to include/
exclude the BlobDB related collector as needed without having to introduce
a second `vector` of collectors in `ColumnFamilyData` with pretty much the same
contents.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8298
Test Plan: `make check`
Reviewed By: jay-zhuang
Differential Revision: D28430910
Pulled By: ltamasi
fbshipit-source-id: a81d28f2c59495865300f43deb2257d2e6977c8e
Summary:
As a part of tiered storage, writing tempeature information to manifest is needed so that after DB recovery, RocksDB still has the tiering information, to implement some further necessary functionalities.
Also fix some issues in simulated hybrid FS.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8284
Test Plan: Add a new unit test to validate that the information is indeed written and read back.
Reviewed By: zhichao-cao
Differential Revision: D28335801
fbshipit-source-id: 56aeb2e6ea090be0200181dd968c8a7278037def
Summary:
Defined the abstract interface for a secondary cache in include/rocksdb/secondary_cache.h, and updated LRUCacheOptions to take a std::shared_ptr<SecondaryCache>. An item is initially inserted into the LRU (primary) cache. When it ages out and evicted from memory, its inserted into the secondary cache. On a LRU cache miss and successful lookup in the secondary cache, the item is promoted to the LRU cache. Only support synchronous lookup currently. The secondary cache would be used to implement a persistent (flash cache) or compressed cache.
Tests:
Results from cache_bench and db_bench don't show any regression due to these changes.
cache_bench results before and after this change -
Command
```./cache_bench -ops_per_thread=10000000 -threads=1```
Before
```Complete in 40.688 s; QPS = 245774```
```Complete in 40.486 s; QPS = 246996```
```Complete in 42.019 s; QPS = 237989```
After
```Complete in 40.672 s; QPS = 245869```
```Complete in 44.622 s; QPS = 224107```
```Complete in 42.445 s; QPS = 235599```
db_bench results before this change, and with this change + https://github.com/facebook/rocksdb/issues/8213 and https://github.com/facebook/rocksdb/issues/8191 -
Commands
```./db_bench --benchmarks="fillseq,compact" -num=30000000 -key_size=32 -value_size=256 -use_direct_io_for_flush_and_compaction=true -db=/home/anand76/nvm_cache/db -partition_index_and_filters=true```
```./db_bench -db=/home/anand76/nvm_cache/db -use_existing_db=true -benchmarks=readrandom -num=30000000 -key_size=32 -value_size=256 -use_direct_reads=true -cache_size=1073741824 -cache_numshardbits=6 -cache_index_and_filter_blocks=true -read_random_exp_range=17 -statistics -partition_index_and_filters=true -threads=16 -duration=300```
Before
```
DB path: [/home/anand76/nvm_cache/db]
readrandom : 80.702 micros/op 198104 ops/sec; 54.4 MB/s (3708999 of 3708999 found)
```
```
DB path: [/home/anand76/nvm_cache/db]
readrandom : 87.124 micros/op 183625 ops/sec; 50.4 MB/s (3439999 of 3439999 found)
```
After
```
DB path: [/home/anand76/nvm_cache/db]
readrandom : 77.653 micros/op 206025 ops/sec; 56.6 MB/s (3866999 of 3866999 found)
```
```
DB path: [/home/anand76/nvm_cache/db]
readrandom : 84.962 micros/op 188299 ops/sec; 51.7 MB/s (3535999 of 3535999 found)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8271
Reviewed By: zhichao-cao
Differential Revision: D28357511
Pulled By: anand1976
fbshipit-source-id: d1cfa236f00e649a18c53328be10a8062a4b6da2
Summary:
The functions will be used for remote compaction parameter
input and result.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8247
Test Plan: `make check`
Reviewed By: ajkr
Differential Revision: D28104680
Pulled By: jay-zhuang
fbshipit-source-id: c0a5178e6277125118384278efea2acbf90aa6cb
Summary:
Adds a new Cache::ApplyToAllEntries API that we expect to use
(in follow-up PRs) for efficiently gathering block cache statistics.
Notable features vs. old ApplyToAllCacheEntries:
* Includes key and deleter (in addition to value and charge). We could
have passed in a Handle but then more virtual function calls would be
needed to get the "fields" of each entry. We expect to use the 'deleter'
to identify the origin of entries, perhaps even more.
* Heavily tuned to minimize latency impact on operating cache. It
does this by iterating over small sections of each cache shard while
cycling through the shards.
* Supports tuning roughly how many entries to operate on for each
lock acquire and release, to control the impact on the latency of other
operations without excessive lock acquire & release. The right balance
can depend on the cost of the callback. Good default seems to be
around 256.
* There should be no need to disable thread safety. (I would expect
uncontended locks to be sufficiently fast.)
I have enhanced cache_bench to validate this approach:
* Reports a histogram of ns per operation, so we can look at the
ditribution of times, not just throughput (average).
* Can add a thread for simulated "gather stats" which calls
ApplyToAllEntries at a specified interval. We also generate a histogram
of time to run ApplyToAllEntries.
To make the iteration over some entries of each shard work as cleanly as
possible, even with resize between next set of entries, I have
re-arranged which hash bits are used for sharding and which for indexing
within a shard.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8225
Test Plan:
A couple of unit tests are added, but primary validation is manual, as
the primary risk is to performance.
The primary validation is using cache_bench to ensure that neither
the minor hashing changes nor the simulated stats gathering
significantly impact QPS or latency distribution. Note that adding op
latency histogram seriously impacts the benchmark QPS, so for a
fair baseline, we need the cache_bench changes (except remove simulated
stat gathering to make it compile). In short, we don't see any
reproducible difference in ops/sec or op latency unless we are gathering
stats nearly continuously. Test uses 10GB block cache with
8KB values to be somewhat realistic in the number of items to iterate
over.
Baseline typical output:
```
Complete in 92.017 s; Rough parallel ops/sec = 869401
Thread ops/sec = 54662
Operation latency (ns):
Count: 80000000 Average: 11223.9494 StdDev: 29.61
Min: 0 Median: 7759.3973 Max: 9620500
Percentiles: P50: 7759.40 P75: 14190.73 P99: 46922.75 P99.9: 77509.84 P99.99: 217030.58
------------------------------------------------------
[ 0, 1 ] 68 0.000% 0.000%
( 2900, 4400 ] 89 0.000% 0.000%
( 4400, 6600 ] 33630240 42.038% 42.038% ########
( 6600, 9900 ] 18129842 22.662% 64.700% #####
( 9900, 14000 ] 7877533 9.847% 74.547% ##
( 14000, 22000 ] 15193238 18.992% 93.539% ####
( 22000, 33000 ] 3037061 3.796% 97.335% #
( 33000, 50000 ] 1626316 2.033% 99.368%
( 50000, 75000 ] 421532 0.527% 99.895%
( 75000, 110000 ] 56910 0.071% 99.966%
( 110000, 170000 ] 16134 0.020% 99.986%
( 170000, 250000 ] 5166 0.006% 99.993%
( 250000, 380000 ] 3017 0.004% 99.996%
( 380000, 570000 ] 1337 0.002% 99.998%
( 570000, 860000 ] 805 0.001% 99.999%
( 860000, 1200000 ] 319 0.000% 100.000%
( 1200000, 1900000 ] 231 0.000% 100.000%
( 1900000, 2900000 ] 100 0.000% 100.000%
( 2900000, 4300000 ] 39 0.000% 100.000%
( 4300000, 6500000 ] 16 0.000% 100.000%
( 6500000, 9800000 ] 7 0.000% 100.000%
```
New, gather_stats=false. Median thread ops/sec of 5 runs:
```
Complete in 92.030 s; Rough parallel ops/sec = 869285
Thread ops/sec = 54458
Operation latency (ns):
Count: 80000000 Average: 11298.1027 StdDev: 42.18
Min: 0 Median: 7722.0822 Max: 6398720
Percentiles: P50: 7722.08 P75: 14294.68 P99: 47522.95 P99.9: 85292.16 P99.99: 228077.78
------------------------------------------------------
[ 0, 1 ] 109 0.000% 0.000%
( 2900, 4400 ] 793 0.001% 0.001%
( 4400, 6600 ] 34054563 42.568% 42.569% #########
( 6600, 9900 ] 17482646 21.853% 64.423% ####
( 9900, 14000 ] 7908180 9.885% 74.308% ##
( 14000, 22000 ] 15032072 18.790% 93.098% ####
( 22000, 33000 ] 3237834 4.047% 97.145% #
( 33000, 50000 ] 1736882 2.171% 99.316%
( 50000, 75000 ] 446851 0.559% 99.875%
( 75000, 110000 ] 68251 0.085% 99.960%
( 110000, 170000 ] 18592 0.023% 99.983%
( 170000, 250000 ] 7200 0.009% 99.992%
( 250000, 380000 ] 3334 0.004% 99.997%
( 380000, 570000 ] 1393 0.002% 99.998%
( 570000, 860000 ] 700 0.001% 99.999%
( 860000, 1200000 ] 293 0.000% 100.000%
( 1200000, 1900000 ] 196 0.000% 100.000%
( 1900000, 2900000 ] 69 0.000% 100.000%
( 2900000, 4300000 ] 32 0.000% 100.000%
( 4300000, 6500000 ] 10 0.000% 100.000%
```
New, gather_stats=true, 1 second delay between scans. Scans take about
1 second here so it's spending about 50% time scanning. Still the effect on
ops/sec and latency seems to be in the noise. Median thread ops/sec of 5 runs:
```
Complete in 91.890 s; Rough parallel ops/sec = 870608
Thread ops/sec = 54551
Operation latency (ns):
Count: 80000000 Average: 11311.2629 StdDev: 45.28
Min: 0 Median: 7686.5458 Max: 10018340
Percentiles: P50: 7686.55 P75: 14481.95 P99: 47232.60 P99.9: 79230.18 P99.99: 232998.86
------------------------------------------------------
[ 0, 1 ] 71 0.000% 0.000%
( 2900, 4400 ] 291 0.000% 0.000%
( 4400, 6600 ] 34492060 43.115% 43.116% #########
( 6600, 9900 ] 16727328 20.909% 64.025% ####
( 9900, 14000 ] 7845828 9.807% 73.832% ##
( 14000, 22000 ] 15510654 19.388% 93.220% ####
( 22000, 33000 ] 3216533 4.021% 97.241% #
( 33000, 50000 ] 1680859 2.101% 99.342%
( 50000, 75000 ] 439059 0.549% 99.891%
( 75000, 110000 ] 60540 0.076% 99.967%
( 110000, 170000 ] 14649 0.018% 99.985%
( 170000, 250000 ] 5242 0.007% 99.991%
( 250000, 380000 ] 3260 0.004% 99.995%
( 380000, 570000 ] 1599 0.002% 99.997%
( 570000, 860000 ] 1043 0.001% 99.999%
( 860000, 1200000 ] 471 0.001% 99.999%
( 1200000, 1900000 ] 275 0.000% 100.000%
( 1900000, 2900000 ] 143 0.000% 100.000%
( 2900000, 4300000 ] 60 0.000% 100.000%
( 4300000, 6500000 ] 27 0.000% 100.000%
( 6500000, 9800000 ] 7 0.000% 100.000%
( 9800000, 14000000 ] 1 0.000% 100.000%
Gather stats latency (us):
Count: 46 Average: 980387.5870 StdDev: 60911.18
Min: 879155 Median: 1033777.7778 Max: 1261431
Percentiles: P50: 1033777.78 P75: 1120666.67 P99: 1261431.00 P99.9: 1261431.00 P99.99: 1261431.00
------------------------------------------------------
( 860000, 1200000 ] 45 97.826% 97.826% ####################
( 1200000, 1900000 ] 1 2.174% 100.000%
Most recent cache entry stats:
Number of entries: 1295133
Total charge: 9.88 GB
Average key size: 23.4982
Average charge: 8.00 KB
Unique deleters: 3
```
Reviewed By: mrambacher
Differential Revision: D28295742
Pulled By: pdillinger
fbshipit-source-id: bbc4a552f91ba0fe10e5cc025c42cef5a81f2b95
Summary:
This change enables a couple of things:
- Different ConfigOptions can have different registry/factory associated with it, thereby allowing things like a "Test" ConfigOptions versus a "Production"
- The ObjectRegistry is created fewer times and can be re-used
The ConfigOptions can also be initialized/constructed from a DBOptions, in which case it will grab some of its settings (Env, Logger) from the DBOptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8166
Reviewed By: zhichao-cao
Differential Revision: D27657952
Pulled By: mrambacher
fbshipit-source-id: ae1d6200bb7ab127405cdeefaba43c7fe694dfdd
Summary:
The WBWI has two differing modes of operation dependent on the value
of the constructor parameter `overwrite_key`.
Currently, regardless of the parameter, neither mode performs as
expected when using Merge. This PR remedies this by correctly invoking
the appropriate Merge Operator before returning results from the WBWI.
Examples of issues that exist which are solved by this PR:
## Example 1 with `overwrite_key=false`
Currently, from an empty database, the following sequence:
```
Put('k1', 'v1')
Merge('k1', 'v2')
Get('k1')
```
Incorrectly yields `v2`, that is to say that the Merge behaves like a Put.
## Example 2 with o`verwrite_key=true`
Currently, from an empty database, the following sequence:
```
Put('k1', 'v1')
Merge('k1', 'v2')
Get('k1')
```
Incorrectly yields `ERROR: kMergeInProgress`.
## Example 3 with `overwrite_key=false`
Currently, with a database containing `('k1' -> 'v1')`, the following sequence:
```
Merge('k1', 'v2')
GetFromBatchAndDB('k1')
```
Incorrectly yields `v1,v2`
## Example 4 with `overwrite_key=true`
Currently, with a database containing `('k1' -> 'v1')`, the following sequence:
```
Merge('k1', 'v1')
GetFromBatchAndDB('k1')
```
Incorrectly yields `ERROR: kMergeInProgress`.
## Example 5 with `overwrite_key=false`
Currently, from an empty database, the following sequence:
```
Put('k1', 'v1')
Merge('k1', 'v2')
GetFromBatchAndDB('k1')
```
Incorrectly yields `v1,v2`
## Example 6 with `overwrite_key=true`
Currently, from an empty database, `('k1' -> 'v1')`, the following sequence:
```
Put('k1', 'v1')
Merge('k1', 'v2')
GetFromBatchAndDB('k1')
```
Incorrectly yields `ERROR: kMergeInProgress`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8135
Reviewed By: pdillinger
Differential Revision: D27657938
Pulled By: mrambacher
fbshipit-source-id: 0fbda6bbc66bedeba96a84786d90141d776297df
Summary:
From HISTORY.md release note:
- Allow `CompactionFilter`s to apply in more table file creation scenarios such as flush and recovery. For compatibility, `CompactionFilter`s by default apply during compaction. Users can customize this behavior by overriding `CompactionFilterFactory::ShouldFilterTableFileCreation()`.
- Removed unused structure `CompactionFilterContext`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8243
Test Plan: added unit tests
Reviewed By: pdillinger
Differential Revision: D28088089
Pulled By: ajkr
fbshipit-source-id: 0799be7908e3b39fea09fc3f1ab00e13ad817fae
Summary:
Larger arena block size does provide the benefit of reducing allocation overhead, however it may cause other troubles. For example, allocator is more likely not to allocate them to physical memory and trigger page fault. Weighing the risk, we cap the arena block size to 1MB. Users can always use a larger value if they want.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7907
Test Plan: Run all existing tests
Reviewed By: pdillinger
Differential Revision: D26135269
fbshipit-source-id: b7f55afd03e6ee1d8715f90fa11b6c33944e9ea8
Summary:
Refactor kill point to one single class, rather than several extern variables. The intention was to drop unflushed data before killing to simulate some job, and I tried to a pointer to fault ingestion fs to the killing class, but it ended up with harder than I thought. Perhaps we'll need to do this in another way. But I thought the refactoring itself is good so I send it out.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8241
Test Plan: make release and run crash test for a while.
Reviewed By: anand1976
Differential Revision: D28078486
fbshipit-source-id: f9182c1455f52e6851c13f88a21bade63bcec45f
Summary:
The ImmutableCFOptions contained a bunch of fields that belonged to the ImmutableDBOptions. This change cleans that up by introducing an ImmutableOptions struct. Following the pattern of Options struct, this class inherits from the DB and CFOption structs (of the Immutable form).
Only one structural change (the ImmutableCFOptions::fs was changed to a shared_ptr from a raw one) is in this PR. All of the other changes involve moving the member variables from the ImmutableCFOptions into the ImmutableOptions and changing member variables or function parameters as required for compilation purposes.
Follow-on PRs may do a further clean-up of the code, such as renaming variables (such as "ImmutableOptions cf_options") and potentially eliminating un-needed function parameters (there is no longer a need to pass both an ImmutableDBOptions and an ImmutableOptions to a function).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8262
Reviewed By: pdillinger
Differential Revision: D28226540
Pulled By: mrambacher
fbshipit-source-id: 18ae71eadc879dedbe38b1eb8e6f9ff5c7147dbf
Summary:
Previously the shutdown process did not properly wait for all
`compaction_thread_limiter` tokens to be released before proceeding to
delete the DB's C++ objects. When this happened, we saw tests like
"DBCompactionTest.CompactionLimiter" flake with the following error:
```
virtual
rocksdb::ConcurrentTaskLimiterImpl::~ConcurrentTaskLimiterImpl():
Assertion `outstanding_tasks_ == 0' failed.
```
There is a case where a token can still be alive even after the shutdown
process has waited for BG work to complete. In particular, this happens
because the shutdown process only waits for flush/compaction scheduled/unscheduled counters to all
reach zero. These counters are decremented in `BackgroundCallCompaction()`
functions. However, tokens are released in `BGWork*Compaction()` functions, which
actually wrap the `BackgroundCallCompaction()` function.
A simple sleep could repro the race condition:
```
$ diff --git a/db/db_impl/db_impl_compaction_flush.cc
b/db/db_impl/db_impl_compaction_flush.cc
index 806bc548a..ba59efa89 100644
--- a/db/db_impl/db_impl_compaction_flush.cc
+++ b/db/db_impl/db_impl_compaction_flush.cc
@@ -2442,6 +2442,7 @@ void DBImpl::BGWorkCompaction(void* arg) {
static_cast<PrepickedCompaction*>(ca.prepicked_compaction);
static_cast_with_check<DBImpl>(ca.db)->BackgroundCallCompaction(
prepicked_compaction, Env::Priority::LOW);
+ sleep(1);
delete prepicked_compaction;
}
$ ./db_compaction_test --gtest_filter=DBCompactionTest.CompactionLimiter
db_compaction_test: util/concurrent_task_limiter_impl.cc:24: virtual rocksdb::ConcurrentTaskLimiterImpl::~ConcurrentTaskLimiterImpl(): Assertion `outstanding_tasks_ == 0' failed.
Received signal 6 (Aborted)
#0 /usr/local/fbcode/platform007/lib/libc.so.6(gsignal+0xcf) [0x7f02673c30ff] ?? ??:0
https://github.com/facebook/rocksdb/issues/1 /usr/local/fbcode/platform007/lib/libc.so.6(abort+0x134) [0x7f02673ac934] ?? ??:0
...
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8253
Test Plan: sleeps to expose race conditions
Reviewed By: akankshamahajan15
Differential Revision: D28168064
Pulled By: ajkr
fbshipit-source-id: 9e5167c74398d323e7975980c5cc00f450631160
Summary:
Previously we saw flakes on platforms like arm on CircleCI, such as the following:
```
Note: Google Test filter = DBTest.L0L1L2AndUpHitCounter
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from DBTest
[ RUN ] DBTest.L0L1L2AndUpHitCounter
db/db_test.cc:5345: Failure
Expected: (TestGetTickerCount(options, GET_HIT_L0)) > (100), actual: 30 vs 100
[ FAILED ] DBTest.L0L1L2AndUpHitCounter (150 ms)
[----------] 1 test from DBTest (150 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (150 ms total)
[ PASSED ] 0 tests.
[ FAILED ] 1 test, listed below:
[ FAILED ] DBTest.L0L1L2AndUpHitCounter
```
The test was totally non-deterministic, e.g., flush/compaction timing would affect how many files on each level. Furthermore, it depended heavily on platform-specific details, e.g., by having a 32KB memtable, it could become full with a very different number of entries depending on the platform.
This PR rewrites the test to build a deterministic LSM with one file per level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8259
Reviewed By: mrambacher
Differential Revision: D28178100
Pulled By: ajkr
fbshipit-source-id: 0a03b26e8d23c29d8297c1bccb1b115dce33bdcd
Summary:
As the first part of the effort of having placing different files on different storage types, this change introduces several things:
(1) An experimental interface in FileSystem that specify temperature to a new file created.
(2) A test FileSystemWrapper, SimulatedHybridFileSystem, that simulates HDD for a file of "warm" temperature.
(3) A simple experimental feature ColumnFamilyOptions.bottommost_temperature. RocksDB would pass this value to FileSystem when creating any bottommost file.
(4) A db_bench parameter that applies the (2) and (3) to db_bench.
The motivation of the change is to introduce minimal changes that allow us to evolve tiered storage development.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8222
Test Plan:
./db_bench --benchmarks=fillrandom --write_buffer_size=2000000 -max_bytes_for_level_base=20000000 -level_compaction_dynamic_level_bytes --reads=100 -compaction_readahead_size=20000000 --reads=100000 -num=10000000
followed by
./db_bench --benchmarks=readrandom,stats --write_buffer_size=2000000 -max_bytes_for_level_base=20000000 -simulate_hybrid_fs_file=/tmp/warm_file_list -level_compaction_dynamic_level_bytes -compaction_readahead_size=20000000 --reads=500 --threads=16 -use_existing_db --num=10000000
and see results as expected.
Reviewed By: ajkr
Differential Revision: D28003028
fbshipit-source-id: 4724896d5205730227ba2f17c3fecb11261744ce
Summary:
Add `num_levels`, `is_bottommost`, and table file creation
`reason` to `FilterBuildingContext`, in anticipation of more powerful
Bloom-like filter support.
To support this, added `is_bottommost` and `reason` to
`TableBuilderOptions`, which allowed removing `reason` parameter from
`rocksdb::BuildTable`.
I attempted to remove `skip_filters` from `TableBuilderOptions`, because
filter construction decisions should arise from options, not one-off
parameters. I could not completely remove it because the public API for
SstFileWriter takes a `skip_filters` parameter, and translating this
into an option change would mean awkwardly replacing the table_factory
if it is BlockBasedTableFactory with new filter_policy=nullptr option.
I marked this public skip_filters option as deprecated because of this
oddity. (skip_filters on the read side probably makes sense.)
At least `skip_filters` is now largely hidden for users of
`TableBuilderOptions` and is no longer used for implementing the
optimize_filters_for_hits option. Bringing the logic for that option
closer to handling of FilterBuildingContext makes it more obvious that
hese two are using the same notion of "bottommost." (Planned:
configuration options for Bloom-like filters that generalize
`optimize_filters_for_hits`)
Recommended follow-up: Try to get away from "bottommost level" naming of
things, which is inaccurate (see
VersionStorageInfo::RangeMightExistAfterSortedRun), and move to
"bottommost run" or just "bottommost."
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8246
Test Plan:
extended an existing unit test to exercise and check various
filter building contexts. Also, existing tests for
optimize_filters_for_hits validate some of the "bottommost" handling,
which is now closely connected to FilterBuildingContext::is_bottommost
through TableBuilderOptions::is_bottommost
Reviewed By: mrambacher
Differential Revision: D28099346
Pulled By: pdillinger
fbshipit-source-id: 2c1072e29c24d4ac404c761a7b7663292372600a
Summary:
Greatly reduced the not-quite-copy-paste giant parameter lists
of rocksdb::NewTableBuilder, rocksdb::BuildTable,
BlockBasedTableBuilder::Rep ctor, and BlockBasedTableBuilder ctor.
Moved weird separate parameter `uint32_t column_family_id` of
TableFactory::NewTableBuilder into TableBuilderOptions.
Re-ordered parameters to TableBuilderOptions ctor, so that `uint64_t
target_file_size` is not randomly placed between uint64_t timestamps
(was easy to mix up).
Replaced a couple of fields of BlockBasedTableBuilder::Rep with a
FilterBuildingContext. The motivation for this change is making it
easier to pass along more data into new fields in FilterBuildingContext
(follow-up PR).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8240
Test Plan: ASAN make check
Reviewed By: mrambacher
Differential Revision: D28075891
Pulled By: pdillinger
fbshipit-source-id: fddb3dbb8260a0e8bdcbb51b877ebabf9a690d4f
Summary:
Don't call ```rocksdb_cache_disown_data()``` as it causes the memory allocated for ```shards_``` to be leaked.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8237
Reviewed By: jay-zhuang
Differential Revision: D28039061
Pulled By: anand1976
fbshipit-source-id: c3464efe2c006b93b4be87030116a12a124598c4
Summary:
Renaming ImmutableCFOptions::info_log and statistics to logger and stats. This is stage 2 in creating an ImmutableOptions class. It is necessary because the names match those in ImmutableOptions and have different types.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8227
Reviewed By: jay-zhuang
Differential Revision: D28000967
Pulled By: mrambacher
fbshipit-source-id: 3bf2aa04e8f1e8724d825b7deacf41080c14420b
Summary:
Add new C APIs to create the JemallocNodumpAllocator and set it on a Cache object.
`make test` passes with and without `DISABLE_JEMALLOC=1`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8178
Reviewed By: jay-zhuang
Differential Revision: D27944631
Pulled By: ajkr
fbshipit-source-id: 2531729aa285a8985c58f22f093c4d53029c4a7b
Summary:
This PR is a first step at attempting to clean up some of the Mutable/Immutable Options code. With this change, a DBOption and a ColumnFamilyOption can be reconstructed from their Mutable and Immutable equivalents, respectively.
readrandom tests do not show any performance degradation versus master (though both are slightly slower than the current 6.19 release).
There are still fields in the ImmutableCFOptions that are not CF options but DB options. Eventually, I would like to move those into an ImmutableOptions (= ImmutableDBOptions+ImmutableCFOptions). But that will be part of a future PR to minimize changes and disruptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8176
Reviewed By: pdillinger
Differential Revision: D27954339
Pulled By: mrambacher
fbshipit-source-id: ec6b805ba9afe6e094bffdbd76246c2d99aa9fad
Summary:
Add compaction API for secondary instance, which compact the files to a secondary DB path without installing to the LSM tree.
The API will be used to remote compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8171
Test Plan: `make check`
Reviewed By: ajkr
Differential Revision: D27694545
Pulled By: jay-zhuang
fbshipit-source-id: 8ff3ec1bffdb2e1becee994918850c8902caf731
Summary:
In current RocksDB, in recover the information form WAL, we do the consistency check for each column family when one WAL file is corrupted and PointInTimeRecovery is set. However, it will report a false positive alert on "SST file is ahead of WALs" when one of the CF current log number is greater than the corrupted WAL number (CF contains the data beyond the corrupted WAl) due to a new column family creation during flush. In this case, a new WAL is created (it is empty) during a flush. Also, due to some reason (e.g., storage issue or crash happens before SyncCloseLog is called), the old WAL is corrupted. The new CF has no data, therefore, it does not have the consistency issue.
Fix: when checking cfd->GetLogNumber() > corrupted_wal_number also check cfd->GetLiveSstFilesSize() > 0. So the CFs with no SST file data will skip the check here.
Note potential ignored inconsistency caused due to fix: empty CF can also be caused by write+delete. In this case, after flush, there is no SST files being generated. However, this CF still have the log in the WAL. When the WAL is corrupted, the DB might be inconsistent.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8207
Test Plan: added unit test, make crash_test
Reviewed By: riversand963
Differential Revision: D27898839
Pulled By: zhichao-cao
fbshipit-source-id: 931fc2d8b92dd00b4169bf84b94e712fd688a83e
Summary:
RocksDB allows user-specified custom comparators which may not be known to `ldb`,
a built-in tool for checking/mutating the database. Therefore, column family comparator
names mismatch encountered during manifest dump should not prevent the dumping from
proceeding.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8216
Test Plan:
```
make check
```
Also manually do the following
```
KEEP_DB=1 ./db_with_timestamp_basic_test
./ldb --db=<db> manifest_dump --verbose
```
The ldb should succeed and print something like:
```
...
--------------- Column family "default" (ID 0) --------------
log number: 6
comparator: <TestComparator>, but the comparator object is not available.
...
```
Reviewed By: ltamasi
Differential Revision: D27927581
Pulled By: riversand963
fbshipit-source-id: f610b2c842187d17f575362070209ee6b74ec6d4
Summary:
Add comment to DisableManualCompaction() which was missing.
Also explictly return from DBImpl::CompactRange() to avoid memtable flush when manual compaction is disabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8186
Test Plan: Run existing unit tests.
Reviewed By: jay-zhuang
Differential Revision: D27744517
fbshipit-source-id: 449548a48905903b888dc9612bd17480f6596a71
Summary:
When WriteBufferManager is shared across DBs and column families
to maintain memory usage under a limit, OOMs have been observed when flush cannot
finish but writes continuously insert to memtables.
In order to avoid OOMs, when memory usage goes beyond buffer_limit_ and DBs tries to write,
this change will stall incoming writers until flush is completed and memory_usage
drops.
Design: Stall condition: When total memory usage exceeds WriteBufferManager::buffer_size_
(memory_usage() >= buffer_size_) WriterBufferManager::ShouldStall() returns true.
DBImpl first block incoming/future writers by calling write_thread_.BeginWriteStall()
(which adds dummy stall object to the writer's queue).
Then DB is blocked on a state State::Blocked (current write doesn't go
through). WBStallInterface object maintained by every DB instance is added to the queue of
WriteBufferManager.
If multiple DBs tries to write during this stall, they will also be
blocked when check WriteBufferManager::ShouldStall() returns true.
End Stall condition: When flush is finished and memory usage goes down, stall will end only if memory
waiting to be flushed is less than buffer_size/2. This lower limit will give time for flush
to complete and avoid continous stalling if memory usage remains close to buffer_size.
WriterBufferManager::EndWriteStall() is called,
which removes all instances from its queue and signal them to continue.
Their state is changed to State::Running and they are unblocked. DBImpl
then signal all incoming writers of that DB to continue by calling
write_thread_.EndWriteStall() (which removes dummy stall object from the
queue).
DB instance creates WBMStallInterface which is an interface to block and
signal DBs during stall.
When DB needs to be blocked or signalled by WriteBufferManager,
state_for_wbm_ state is changed accordingly (RUNNING or BLOCKED).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7898
Test Plan: Added a new test db/db_write_buffer_manager_test.cc
Reviewed By: anand1976
Differential Revision: D26093227
Pulled By: akankshamahajan15
fbshipit-source-id: 2bbd982a3fb7033f6de6153aa92a221249861aae
Summary:
Fixes https://github.com/facebook/rocksdb/issues/6245.
Adapted from https://github.com/facebook/rocksdb/issues/8201 and https://github.com/facebook/rocksdb/issues/8205.
Previously we were writing the ingested file's smallest/largest internal keys
with sequence number zero, or `kMaxSequenceNumber` in case of range
tombstone. The former (sequence number zero) is incorrect and can lead
to files being incorrectly ordered. The fix in this PR is to overwrite
boundary keys that have sequence number zero with the ingested file's assigned
sequence number.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8209
Test Plan: repro unit test
Reviewed By: riversand963
Differential Revision: D27885678
Pulled By: ajkr
fbshipit-source-id: 4a9f2c6efdfff81c3a9923e915ea88b250ee7b6a
Summary:
Unittest reports no space from time to time, which can be reproduced on a small memory machine with SHM. It's caused by large WAL files generated during the test, which is preallocated, but didn't truncate during close(). Adding the missing APIs to set preallocation.
It added arm test as nightly build, as the test runs more than 1 hour.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8204
Test Plan: test on small memory arm machine
Reviewed By: mrambacher
Differential Revision: D27873145
Pulled By: jay-zhuang
fbshipit-source-id: f797c429d6bc13cbcc673bc03fcc72adda55f506
Summary:
In a distributed environment, a file `rename()` operation can succeed on server (remote)
side, but the client can somehow return non-ok status to RocksDB. Possible reasons include
network partition, connection issue, etc. This happens in `rocksdb::SetCurrentFile()`, which
can be called in `LogAndApply() -> ProcessManifestWrites()` if RocksDB tries to switch to a
new MANIFEST. We currently always delete the new MANIFEST if an error occurs.
This is problematic in distributed world. If the server-side successfully updates the CURRENT
file via renaming, then a subsequent `DB::Open()` will try to look for the new MANIFEST and fail.
As a fix, we can track the execution result of IO operations on the new MANIFEST.
- If IO operations on the new MANIFEST fail, then we know the CURRENT must point to the original
MANIFEST. Therefore, it is safe to remove the new MANIFEST.
- If IO operations on the new MANIFEST all succeed, but somehow we end up in the clean up
code block, then we do not know whether CURRENT points to the new or old MANIFEST. (For local
POSIX-compliant FS, it should still point to old MANIFEST, but it does not matter if we keep the
new MANIFEST.) Therefore, we keep the new MANIFEST.
- Any future `LogAndApply()` will switch to a new MANIFEST and update CURRENT.
- If process reopens the db immediately after the failure, then the CURRENT file can point
to either the new MANIFEST or the old one, both of which exist. Therefore, recovery can
succeed and ignore the other.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8192
Test Plan: make check
Reviewed By: zhichao-cao
Differential Revision: D27804648
Pulled By: riversand963
fbshipit-source-id: 9c16f2a5ce41bc6aadf085e48449b19ede8423e4
Summary:
Historically, the DB properties `rocksdb.cur-size-active-mem-table`,
`rocksdb.cur-size-all-mem-tables`, and `rocksdb.size-all-mem-tables` called
the method `MemTable::ApproximateMemoryUsage` for mutable memtables,
which is not safe without synchronization. This resulted in data races with
memtable inserts. The patch changes the code handling these properties
to use `MemTable::ApproximateMemoryUsageFast` instead, which returns a
cached value backed by an atomic variable. Two test cases had to be updated
for this change. `MemoryTest.MemTableAndTableReadersTotal` was fixed by
increasing the value size used so each value ends up in its own memtable,
which was the original intention (note: the test has been broken in the sense
that the test code didn't consider that memtable sizes below 64 KB get
increased to 64 KB by `SanitizeOptions`, and has been passing only by
accident). `DBTest.MemoryUsageWithMaxWriteBufferSizeToMaintain` relies on
completely up-to-date values and thus was changed to use `ApproximateMemoryUsage`
directly instead of going through the DB properties. Note: this should be safe in this case
since there's only a single thread involved.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8206
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D27866811
Pulled By: ltamasi
fbshipit-source-id: 7bd754d0565e0a65f1f7f0e78ffc093beef79394
Summary:
If `options.best_efforts_recovery == true`, RocksDB currently tolerates missing table files and recovers to the latest version without missing table files (not considering WAL). It is necessary to handle blob files as well to make the feature more complete.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8180
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D27840556
Pulled By: riversand963
fbshipit-source-id: 041685d0dc2e7779ac4f0374c07a8a327704aa5e
Summary:
Added the Blob option settings from the AdvancedColmnFamilyOptions to the C API.
There are no tests for getting/setting options in the C API currently, hence no specific test plans. Should there be a some?
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8148
Reviewed By: ltamasi
Differential Revision: D27568495
Pulled By: mrambacher
fbshipit-source-id: 3a52b784467ea2c4bc58be5f75c5d41f0a5c55d6
Summary:
Updated the test to wait until all trash files are deleted by
SSTFileManager in the background. Since deletion runs in background so
number of files deleted might not always be as expected.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8196
Reviewed By: jay-zhuang
Differential Revision: D27812273
Pulled By: akankshamahajan15
fbshipit-source-id: d3ace1db34f91254b52fa455e09844d02801f58e
Summary:
Extend the DB::GetLiveFilesChecksumInfo API to blob files.
This API is also used by the file_checksum_dump ldb command to dump checksum
of SST files which now also dumps blob files checksum.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8179
Test Plan: Add new unit test
Reviewed By: zhichao-cao
Differential Revision: D27714965
Pulled By: akankshamahajan15
fbshipit-source-id: d8b7343ea845a64c83800336d88cced7152a8c92