Commit Graph

10 Commits

Author SHA1 Message Date
Zhongyi Xie
2f41ecfe75 Refactor trimming logic for immutable memtables (#5022)
Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022

Differential Revision: D14394062

Pulled By: miasantreble

fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
2019-08-23 13:55:34 -07:00
Eli Pozniansky
c129c75fb7 Added log_readahead_size option to control prefetching for Log::Reader (#5592)
Summary:
Added log_readahead_size option to control prefetching for Log::Reader.
This is mostly useful for reading a remotely located log, as it can save the number of round-trips when reading it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5592

Differential Revision: D16362989

Pulled By: elipoz

fbshipit-source-id: c5d4d5245a44008cd59879640efff70c091ad3e8
2019-07-19 12:00:19 -07:00
Zhongyi Xie
8d34806972 setup wal_in_db_path_ for secondary instance (#5545)
Summary:
PR https://github.com/facebook/rocksdb/pull/5520 adds DBImpl:: wal_in_db_path_ and initializes it in DBImpl::Open, this PR fixes the valgrind error for secondary instance:
```
==236417== Conditional jump or move depends on uninitialised value(s)
==236417==    at 0x62242A: rocksdb::DeleteDBFile(rocksdb::ImmutableDBOptions const*, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, bool, bool) (file_util.cc:96)
==236417==    by 0x512432: rocksdb::DBImpl::DeleteObsoleteFileImpl(int, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, std::__cxx11::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, rocksdb::FileType, unsigned long) (db_impl_files.cc:261)
==236417==    by 0x515A7A: rocksdb::DBImpl::PurgeObsoleteFiles(rocksdb::JobContext&, bool) (db_impl_files.cc:492)
==236417==    by 0x499153: rocksdb::ColumnFamilyHandleImpl::~ColumnFamilyHandleImpl() (column_family.cc:75)
==236417==    by 0x499880: rocksdb::ColumnFamilyHandleImpl::~ColumnFamilyHandleImpl() (column_family.cc:84)
==236417==    by 0x4C9AF9: rocksdb::DB::DestroyColumnFamilyHandle(rocksdb::ColumnFamilyHandle*) (db_impl.cc:3105)
==236417==    by 0x44E853: CloseSecondary (db_secondary_test.cc:53)
==236417==    by 0x44E853: rocksdb::DBSecondaryTest::~DBSecondaryTest() (db_secondary_test.cc:31)
==236417==    by 0x44EC77: ~DBSecondaryTest_PrimaryDropColumnFamily_Test (db_secondary_test.cc:443)
==236417==    by 0x44EC77: rocksdb::DBSecondaryTest_PrimaryDropColumnFamily_Test::~DBSecondaryTest_PrimaryDropColumnFamily_Test() (db_secondary_test.cc:443)
==236417==    by 0x83D1D7: HandleSehExceptionsInMethodIfSupported<testing::Test, void> (gtest-all.cc:3824)
==236417==    by 0x83D1D7: void testing::internal::HandleExceptionsInMethodIfSupported<testing::Test, void>(testing::Test*, void (testing::Test::*)(), char const*) (gtest-all.cc:3860)
==236417==    by 0x8346DB: testing::TestInfo::Run() [clone .part.486] (gtest-all.cc:4078)
==236417==    by 0x8348D4: Run (gtest-all.cc:4047)
==236417==    by 0x8348D4: testing::TestCase::Run() [clone .part.487] (gtest-all.cc:4190)
==236417==    by 0x834D14: Run (gtest-all.cc:6100)
==236417==    by 0x834D14: testing::internal::UnitTestImpl::RunAllTests() (gtest-all.cc:6062)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5545

Differential Revision: D16146224

Pulled By: miasantreble

fbshipit-source-id: 184c90e451352951da4e955f054d4b1a1f29ea29
2019-07-07 21:32:50 -07:00
Yanqin Jin
7d8d56413d Override check consistency for DBImplSecondary (#5469)
Summary:
`DBImplSecondary` calls `CheckConsistency()` during open. In the past, `DBImplSecondary` did not override this function thus `DBImpl::CheckConsistency()` is called.
The following can happen. The secondary instance is performing consistency check which calls `GetFileSize(file_path)` but the file at `file_path` is deleted by the primary instance. `DBImpl::CheckConsistency` does not account for this and fails the consistency check. This is undesirable. The solution is that, we call `DBImpl::CheckConsistency()` first. If it passes, then we are good. If not, we give it a second chance and handles the case of file(s) being deleted.

Test plan (on dev server):
```
$make clean && make -j20 all
$./db_secondary_test
```
All other existing unit tests must pass as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5469

Differential Revision: D15861845

Pulled By: riversand963

fbshipit-source-id: 507d72392508caed3cd003bb2e2aa43f993dd597
2019-06-17 15:39:55 -07:00
Yanqin Jin
7177dc46a1 Handle missing WAL in secondary mode (#5323)
Summary:
In secondary mode, it is possible that the secondary lists the primary's WAL
directory, finds a WAL and tries to open it. It is possible that the primary
deletes the WAL after secondary listing dir but before the secondary opening
it. Then the secondary will fail to open the WAL file with a PathNotFound
status. In this case, we can return OK without replaying WAL and optionally
replay more MANIFEST.

Test Plan (on my dev machine):
Without this PR, the following will fail several times out of 100 runs.
```
~/gtest-parallel/gtest-parallel -r 100 -w 16 ./db_secondary_test --gtest_filter=DBSecondaryTest.SwitchToNewManifestDuringOpen
```
With this PR, the above should always succeed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5323

Differential Revision: D15763878

Pulled By: riversand963

fbshipit-source-id: c7164fa7cb8d9001abc258b6a2dc93613e4f38ff
2019-06-11 13:08:28 -07:00
Yanqin Jin
641cc8d541 Use CreateLoggerFromOptions function (#5427)
Summary:
Use `CreateLoggerFromOptions` function to reduce code duplication.

Test plan (on my machine)
```
$make clean && make -j32 db_secondary_test
$KEEP_DB=1 ./db_secondary_test
```
Verify all info logs of the secondary instance are properly logged.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5427

Differential Revision: D15748922

Pulled By: riversand963

fbshipit-source-id: bad7261df1b8373efc504f141efc7871e375a311
2019-06-10 16:00:30 -07:00
Yanqin Jin
6ce5580882 Improve memtable earliest seqno assignment for secondary instance (#5413)
Summary:
In regular RocksDB instance, `MemTable::earliest_seqno_` is "db sequence number at the time of creation". However, we cannot use the db sequence number to set the value of `MemTable::earliest_seqno_` for secondary instance, i.e. `DBImplSecondary` due to the logic of MANIFEST and WAL replay.
When replaying the log files of the primary, the secondary instance first replays MANIFEST and updates the db sequence number if necessary. Next, the secondary replays WAL files, creates new memtables if necessary and inserts key-value pairs into memtables. The following can occur when the db has two or more column families.
Assume the db has column family "default" and "cf1". At a certain in time, both "default" and "cf1" have data in memtables.
1. Primary triggers a flush and flushes "cf1". "default" is **not** flushed.
2. Secondary replays the MANIFEST updates its db sequence number to the latest value learned from the MANIFEST.
3. Secondary starts to replay WAL that contains the writes to "default". It is possible that the write batches' sequence numbers are smaller than the db sequence number. In this case, these write batches will be skipped, and these updates will not be visible to reader until "default" is later flushed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5413

Differential Revision: D15637407

Pulled By: riversand963

fbshipit-source-id: 3de3fe35cfc6f1b9f844f3f926f0df29717b6580
2019-06-10 12:58:14 -07:00
Zhongyi Xie
d68f9f4580 simplify include directive involving inttypes (#5402)
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402

Differential Revision: D15701195

Pulled By: miasantreble

fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
2019-06-06 13:56:07 -07:00
Siying Dong
000b9ec217 Move some logging related files to logging/ (#5387)
Summary:
Many logging related source files are under util/. It will be more structured if they are together.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5387

Differential Revision: D15579036

Pulled By: siying

fbshipit-source-id: 3850134ed50b8c0bb40a0c8ae1f184fa4081303f
2019-05-31 17:23:59 -07:00
Vijay Nadimpalli
49c5a12dbe Organizing rocksdb/db directory
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/5390

Differential Revision: D15579388

Pulled By: vjnadimpalli

fbshipit-source-id: 5bfc95e31554b8ff05b97b76d6534113f527f366
2019-05-31 11:57:01 -07:00