Summary:
The logic to wait for stall conditions to clear before beginning a manual flush didn't take into account whether the DB was in read-only mode. In read-only mode the stall conditions would never clear since no background work is happening, so the wait would be never-ending. It's probably better to return an error to the user.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4615
Differential Revision: D12888008
Pulled By: ajkr
fbshipit-source-id: 1c474b42a7ac38d9fd0d0e2340ff1d53e684d83c
Summary:
A background compaction with pre-picked files (i.e., either a manual compaction or a bottom-pri compaction) fails when the DB is in read-only mode. In the failure handling, we forgot to unregister the compaction and the files it covered. Then subsequent manual compactions could conflict with this zombie compaction (possibly Halloween related) and wait forever for it to finish.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4611
Differential Revision: D12871217
Pulled By: ajkr
fbshipit-source-id: 9d24e921d5bbd2ee8c2c9536a30abfa42a220c6e
Summary:
Add unit tests to demonstrate that `VersionSet::Recover` is able to detect and handle cases in which the MANIFEST has valid atomic group, incomplete trailing atomic group, atomic group mixed with normal version edits and atomic group with incorrect size.
With this capability, RocksDB identifies non-valid groups of version edits and do not apply them, thus guaranteeing that the db is restored to a state consistent with the most recent successful atomic flush before applying WAL.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4433
Differential Revision: D10079202
Pulled By: riversand963
fbshipit-source-id: a0e0b8bf4da1cf68e044d397588c121b66c68876
Summary:
Since the number of range deletions are reported in
TableProperties, it is confusing to not report the number of merge
operands and point deletions as top-level properties; they are
accessible through the public API, but since they are not the "main"
properties, they do not appear in aggregated table properties, or the
string representation of table properties.
This change promotes those two property keys to
`rocksdb/table_properties.h`, adds corresponding uint64 members for
them, deprecates the old access methods `GetDeletedKeys()` and
`GetMergeOperands()` (though they are still usable for now), and removes
`InternalKeyPropertiesCollector`. The property key strings are the same
as before this change, so this should be able to read DBs written from older
versions (though I haven't tested this yet).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4594
Differential Revision: D12826893
Pulled By: abhimadan
fbshipit-source-id: 9e4e4fbdc5b0da161c89582566d184101ba8eb68
Summary:
EnableFileDeletions() does info logging inside db mutex. This is not recommended in the code base, since there could be I/O involved. Move this outside the DB mutex.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4604
Differential Revision: D12834432
Pulled By: siying
fbshipit-source-id: ffe5c2626fcfdb4c54a661a3c3b0bc95054816cf
Summary:
When there's a gap between files, we do not need to output tombstones starting at the next output file's begin key to the current output file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4592
Differential Revision: D12808627
Pulled By: ajkr
fbshipit-source-id: 77c8b2e7523a95b1cd6611194144092c06acb505
Summary:
Since ErrorHandler::RecoverFromNoSpace is no-op in LITE mode, then we should
not have this test in LITE mode. If we do keep it, it will cause the test
thread to wait on bg_cv_ that will not be signalled.
How to reproduce
```
$make clean && git checkout a27fce408e
$OPT="-DROCKSDB_LITE -g" make -j20
$./db_io_failure_test --gtest_filter=DBIOFailureTest.NoSpaceCompactRange
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4596
Differential Revision: D12818516
Pulled By: riversand963
fbshipit-source-id: bc83524f40fff1e29506979017f7f4c2b70322f3
Summary:
For flush triggered by RocksDB due to memory usage approaching certain
threshold (WriteBufferManager or Memtable full), we should cut the memtable
only when the current active memtable is not empty, i.e. contains data. This is
what we do for non-atomic flush. If we always cut memtable even when the active
memtable is empty, we will generate extra, empty immutable memtable.
This is not ideal since it may cause write stall. It also causes some
DBAtomicFlushTest to fail because cfd->imm()->NumNotFlushed() is different from
expectation.
Test plan
```
$make clean && make J=1 -j32 all check
$make clean && OPT="-DROCKSDB_LITE -g" make J=1 -j32 all check
$make clean && TEST_TMPDIR=/dev/shm/rocksdb OPT=-g make J=1 -j32 valgrind_test
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4595
Differential Revision: D12818520
Pulled By: riversand963
fbshipit-source-id: d867bdbeacf4199fdd642debb085f94703c41a18
Summary:
Rename the interface, as it is mean to be a generic interface for memory allocation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4590
Differential Revision: D10866340
Pulled By: yiwu-arbug
fbshipit-source-id: 85cb753351a40cb856c046aeaa3f3b369eef3d16
Summary:
This allows tombstone fragmenting to only be performed when the table is opened, and cached for subsequent accesses.
On the same DB used in #4449, running `readrandom` results in the following:
```
readrandom : 0.983 micros/op 1017076 ops/sec; 78.3 MB/s (63103 of 100000 found)
```
Now that Get performance in the presence of range tombstones is reasonable, I also compared the performance between a DB with range tombstones, "expanded" range tombstones (several point tombstones that cover the same keys the equivalent range tombstone would cover, a common workaround for DeleteRange), and no range tombstones. The created DBs had 5 million keys each, and DeleteRange was called at regular intervals (depending on the total number of range tombstones being written) after 4.5 million Puts. The table below summarizes the results of a `readwhilewriting` benchmark (in order to provide somewhat more realistic results):
```
Tombstones? | avg micros/op | stddev micros/op | avg ops/s | stddev ops/s
----------------- | ------------- | ---------------- | ------------ | ------------
None | 0.6186 | 0.04637 | 1,625,252.90 | 124,679.41
500 Expanded | 0.6019 | 0.03628 | 1,666,670.40 | 101,142.65
500 Unexpanded | 0.6435 | 0.03994 | 1,559,979.40 | 104,090.52
1k Expanded | 0.6034 | 0.04349 | 1,665,128.10 | 125,144.57
1k Unexpanded | 0.6261 | 0.03093 | 1,600,457.50 | 79,024.94
5k Expanded | 0.6163 | 0.05926 | 1,636,668.80 | 154,888.85
5k Unexpanded | 0.6402 | 0.04002 | 1,567,804.70 | 100,965.55
10k Expanded | 0.6036 | 0.05105 | 1,667,237.70 | 142,830.36
10k Unexpanded | 0.6128 | 0.02598 | 1,634,633.40 | 72,161.82
25k Expanded | 0.6198 | 0.04542 | 1,620,980.50 | 116,662.93
25k Unexpanded | 0.5478 | 0.0362 | 1,833,059.10 | 121,233.81
50k Expanded | 0.5104 | 0.04347 | 1,973,107.90 | 184,073.49
50k Unexpanded | 0.4528 | 0.03387 | 2,219,034.50 | 170,984.32
```
After a large enough quantity of range tombstones are written, range tombstone Gets can become faster than reading from an equivalent DB with several point tombstones.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4493
Differential Revision: D10842844
Pulled By: abhimadan
fbshipit-source-id: a7d44534f8120e6aabb65779d26c6b9df954c509
Summary:
Currently there are two contrun test failures:
* rocksdb-contrun-lite:
> tools/db_bench_tool.cc: In function ‘int rocksdb::db_bench_tool(int, char**)’:
tools/db_bench_tool.cc:5814:5: error: ‘DumpMallocStats’ is not a member of ‘rocksdb’
rocksdb::DumpMallocStats(&stats_string);
^
make: *** [tools/db_bench_tool.o] Error 1
* rocksdb-contrun-unity:
> In file included from unity.cc:44:0:
db/range_tombstone_fragmenter.cc: In member function ‘void rocksdb::FragmentedRangeTombstoneIterator::FragmentTombstones(std::unique_ptr<rocksdb::InternalIteratorBase<rocksdb::Slice> >, rocksdb::SequenceNumber)’:
db/range_tombstone_fragmenter.cc:90:14: error: reference to ‘ParsedInternalKeyComparator’ is ambiguous
auto cmp = ParsedInternalKeyComparator(icmp_);
This PR will fix them
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4587
Differential Revision: D10846554
Pulled By: miasantreble
fbshipit-source-id: 8d3358879e105060197b1379c84aecf51b352b93
Summary:
Previously, range tombstones were accumulated from every level, which
was necessary if a range tombstone in a higher level covered a key in a lower
level. However, RangeDelAggregator::AddTombstones's complexity is based on
the number of tombstones that are currently stored in it, which is wasteful in
the Get case, where we only need to know the highest sequence number of range
tombstones that cover the key from higher levels, and compute the highest covering
sequence number at the current level. This change introduces this optimization, and
removes the use of RangeDelAggregator from the Get path.
In the benchmark results, the following command was used to initialize the database:
```
./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8
```
...and the following command was used to measure read throughput:
```
./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32
```
The filluniquerandom command was only run once, and the resulting database was used
to measure read performance before and after the PR. Both binaries were compiled with
`DEBUG_LEVEL=0`.
Readrandom results before PR:
```
readrandom : 4.544 micros/op 220090 ops/sec; 16.9 MB/s (63103 of 100000 found)
```
Readrandom results after PR:
```
readrandom : 11.147 micros/op 89707 ops/sec; 6.9 MB/s (63103 of 100000 found)
```
So it's actually slower right now, but this PR paves the way for future optimizations (see #4493).
----
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449
Differential Revision: D10370575
Pulled By: abhimadan
fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
Summary:
PR https://github.com/facebook/rocksdb/pull/4226 introduced per-level perf context which allows breaking down perf context by levels.
This PR takes advantage of the feature to populate a few counters related to bloom filters
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4581
Differential Revision: D10518010
Pulled By: miasantreble
fbshipit-source-id: 011244561783ec860d32d5b0fa6bce6e78d70ef8
Summary:
This fixes three tests that fail with relatively recent tools and libraries:
The tests are:
* `spatial_db_test`
* `table_test`
* `db_universal_compaction_test`
I'm using:
* `gcc` 7.3.0
* `glibc` 2.27
* `snappy` 1.1.7
* `gflags` 2.2.1
* `zlib` 1.2.11
* `bzip2` 1.0.6.0.1
* `lz4` 1.8.2
* `jemalloc` 5.0.1
The versions used in the Travis environment (which is two Ubuntu LTS versions behind the current one and doesn't use `lz4` or `jemalloc`) don't seem to have a problem. However, to be safe, I verified that these tests pass with and without my changes in a trusty Docker container without `lz4` and `jemalloc`.
However, I do get an unrelated set of other failures when using a trusty Docker container that uses `lz4` and `jemalloc`:
```
db/db_universal_compaction_test.cc:506: Failure
Value of: num + 1
Actual: 3
Expected: NumSortedRuns(1)
Which is: 4
[ FAILED ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/0, where GetParam() = (1, false) (1189 ms)
[ RUN ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/1
db/db_universal_compaction_test.cc:506: Failure
Value of: num + 1
Actual: 3
Expected: NumSortedRuns(1)
Which is: 4
[ FAILED ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/1, where GetParam() = (1, true) (1246 ms)
[ RUN ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/2
db/db_universal_compaction_test.cc:506: Failure
Value of: num + 1
Actual: 3
Expected: NumSortedRuns(1)
Which is: 4
[ FAILED ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/2, where GetParam() = (3, false) (1237 ms)
[ RUN ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/3
db/db_universal_compaction_test.cc:506: Failure
Value of: num + 1
Actual: 3
Expected: NumSortedRuns(1)
Which is: 4
[ FAILED ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/3, where GetParam() = (3, true) (1195 ms)
[ RUN ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/4
db/db_universal_compaction_test.cc:506: Failure
Value of: num + 1
Actual: 3
Expected: NumSortedRuns(1)
Which is: 4
[ FAILED ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/4, where GetParam() = (5, false) (1161 ms)
[ RUN ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/5
db/db_universal_compaction_test.cc:506: Failure
Value of: num + 1
Actual: 3
Expected: NumSortedRuns(1)
Which is: 4
[ FAILED ] UniversalCompactionNumLevels/DBTestUniversalCompaction.DynamicUniversalCompactionReadAmplification/5, where GetParam() = (5, true) (1229 ms)
```
I haven't attempted to fix these since I'm not using trusty and Travis doesn't use `lz4` and `jemalloc`. However, the final commit in this PR does at least fix the compilation errors that occur when using trusty's version of `lz4`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4562
Differential Revision: D10510917
Pulled By: maysamyabandeh
fbshipit-source-id: 59534042015ec339270e5fc2f6ac4d859370d189
Summary:
clang analyzer currently fails with the following warnings:
> db/log_reader.cc:323:9: warning: Undefined or garbage value returned to caller
return r;
^~~~~~~~
db/log_reader.cc:344:11: warning: Undefined or garbage value returned to caller
return r;
^~~~~~~~
db/log_reader.cc:369:11: warning: Undefined or garbage value returned to caller
return r;
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4583
Differential Revision: D10523517
Pulled By: miasantreble
fbshipit-source-id: 0cc8b8f27657b202bead148bbe7c4aa84fed095b
Summary:
There was a bug that the user comparator would receive the internal key instead of the user key. The bug was due to RangeMightExistAfterSortedRun expecting user key but receiving internal key when called in GenerateBottommostFiles. The patch augment an existing unit test to reproduce the bug and fixes it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4575
Differential Revision: D10500434
Pulled By: maysamyabandeh
fbshipit-source-id: 858346d2fd102cce9e20516d77338c112bdfe366
Summary:
Level compaction usually performs poorly when the writes so heavy that the level targets can't be guaranteed. With this improvement, we improve level_compaction_dynamic_level_bytes = true so that in the write heavy cases, the level multiplier can be slightly adjusted based on the size of L0.
We keep the behavior the same if number of L0 files is under 2X compaction trigger and the total size is less than options.max_bytes_for_level_base, so that unless write is so heavy that compaction cannot keep up, the behavior doesn't change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4338
Differential Revision: D9636782
Pulled By: siying
fbshipit-source-id: e27fc17a7c29c84b00064cc17536a01dacef7595
Summary:
When `MockTimeEnv` is used in test to mock time methods, we cannot use `CondVar::TimedWait` because it is using real time, not the mocked time for wait timeout. On Mac the method can return immediately without awaking other waiting threads, if the real time is larger than `wait_until` (which is a mocked time). When that happen, the `wait()` method will fall into an infinite loop.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4560
Differential Revision: D10472851
Pulled By: yiwu-arbug
fbshipit-source-id: 898902546ace7db7ac509337dd8677a527209d19
Summary:
Current `log::Reader` does not perform retry after encountering `EOF`. In the future, we need the log reader to be able to retry tailing the log even after `EOF`.
Current implementation is simple. It does not provide more advanced retry policies. Will address this in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4394
Differential Revision: D9926508
Pulled By: riversand963
fbshipit-source-id: d86d145792a41bd64a72f642a2a08c7b7b5201e1
Summary:
We have already disabled it on Travis since it has been too flaky. The same problem arises in Appveyor as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4536
Differential Revision: D10452240
Pulled By: maysamyabandeh
fbshipit-source-id: 728f4ecddf780097159dc0a0737d460eb5ce4f09
Summary:
When there are no range deletions, flush and compaction perform a binary search
on an effectively empty map every time they call ShouldDelete. This PR lazily
initializes each stripe map entry so that the binary search can be elided in
these cases.
After this PR, the total amount of time spent in compactions is 52.541331s, and the total amount of time spent in flush is 5.532608s, the former of which is a significant improvement from the results after #4495.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4497
Differential Revision: D10428610
Pulled By: abhimadan
fbshipit-source-id: 6f7e1ce3698fac3ef86d1197955e6b72e0931a0f
Summary:
Current implementation of perf context is level agnostic. Making it hard to do performance evaluation for the LSM tree. This PR adds `PerfContextByLevel` to decompose the counters by level.
This will be helpful when analyzing point and range query performance as well as tuning bloom filter
Also replaced __thread with thread_local keyword for perf_context
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4226
Differential Revision: D10369509
Pulled By: miasantreble
fbshipit-source-id: f1ced4e0de5fcebdb7f9cff36164516bc6382d82
Summary:
When a CompactRange() call for a level is truncated before the end key
is reached, because it exceeds max_compaction_bytes, we need to properly
set the compaction_end parameter to indicate the stop key. The next
CompactRange will use that as the begin key. We set it to the smallest
key of the next file in the level after expanding inputs to get a clean
cut.
Previously, we were setting it before expanding inputs. So we could end
up recompacting some files. In a pathological case, where a single key
has many entries spanning all the files in the level (possibly due to
merge operands without a partial merge operator, thus resulting in
compaction output identical to the input), this would result in
an endless loop over the same set of files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4496
Differential Revision: D10395026
Pulled By: anand1976
fbshipit-source-id: f0c2f89fee29b4b3be53b6467b53abba8e9146a9
Summary:
Leverage existing `FlushJob` to implement atomic flush of multiple column families.
This PR depends on other PRs and is a subset of #3752 . This PR itself is not sufficient in fulfilling atomic flush.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4262
Differential Revision: D9283109
Pulled By: riversand963
fbshipit-source-id: 65401f913e4160b0a61c0be6cd02adc15dad28ed
Summary:
`CompactionIterator::snapshots_` is ordered by ascending seqnum, just like `DBImpl`'s linked list of snapshots from which it was copied. This PR exploits this ordering to make `findEarliestVisibleSnapshot` do binary search rather than linear scan. This can make flush/compaction significantly faster when many snapshots exist since that function is called on every single key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4495
Differential Revision: D10386470
Pulled By: ajkr
fbshipit-source-id: 29734991631227b6b7b677e156ac567690118a8b
Summary:
We would like to collect file-system-level statistics including file name, offset, length, return code, latency, etc., which requires to add callbacks to intercept file IO function calls when RocksDB is running.
To collect file-system-level statistics, users can inherit the class `EventListener`, as in `TestFileOperationListener `. Note that `TestFileOperationListener::ShouldBeNotifiedOnFileIO()` returns true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3933
Differential Revision: D10219571
Pulled By: riversand963
fbshipit-source-id: 7acc577a2d31097766a27adb6f78eaf8b1e8ff15
Summary:
The "je_" prefix of jemalloc APIs presents only when the macro `JEMALLOC_NO_RENAME` from jemalloc.h presents.
With the patch I'm also adding -DROCKSDB_JEMALLOC flag in buck TARGETS.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4488
Differential Revision: D10355971
Pulled By: yiwu-arbug
fbshipit-source-id: 03a2d69790a44ac89219c7525763fa937a63d95a
Summary:
This commit adds code to acquire lock on the DB LOCK file
before starting the repair process. This will prevent
multiple processes from performing repair on the same DB
simultaneously. Fixes repair_test to work with this change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4435
Differential Revision: D10361499
Pulled By: riversand963
fbshipit-source-id: 3c512c48b7193d383b2279ccecabdb660ac1cf22
Summary:
Using `./range_del_aggregator_bench --use_collapsed=false
--num_range_tombstones=5000 --num_runs=1000`, here are the results before and
after this change:
Before:
```
=========================
Results:
=========================
AddTombstones: 1822.61 us
ShouldDelete (first): 94.5286 us
```
After:
```
=========================
Results:
=========================
AddTombstones: 199.26 us
ShouldDelete (first): 38.9344 us
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4487
Differential Revision: D10347288
Pulled By: abhimadan
fbshipit-source-id: d44efe3a166d583acfdc3ec1199e0892f34dbfb7
Summary:
Wrong I overwrite `WriteBatch::Handler::Continue` to return _false_ at some point, I always get the `Status::Corruption` error.
I don't think this check is used correctly here: The counter in `found` cannot reflect all entries in the WriteBatch when we exit the loop early.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4478
Differential Revision: D10317416
Pulled By: yiwu-arbug
fbshipit-source-id: cccae3382805035f9b3239b66682b5fcbba6bb61
Summary:
Even during `DBIter::Prev()`, there is a case where we need to use `RangeDelPositioningMode::kForwardTraversal`. In particular, when we hit too many internal keys for a single user key, we use seek to find the newest internal key. If it's a merge operand, we then scan forwards, collecting the merge operands. This forward scan should be using `RangeDelPositioningMode::kForwardTraversal`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4481
Differential Revision: D10319507
Pulled By: ajkr
fbshipit-source-id: b5ce7352461f3a7696b28a5136ae0076f2bde51f
Summary:
fix#4288
Add `OnCompactionBegin` support to `rocksdb::EventListener`.
Currently, we only have these three callbacks:
- OnFlushBegin
- OnFlushCompleted
- OnCompactionCompleted
As paolococchi requested in #4288 , and ajkr agreed, we should also support `OnCompactionBegin`.
This PR is a try to implement the support of `OnCompactionBegin`.
Hope it is useful to you.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4431
Differential Revision: D10055515
Pulled By: yiwu-arbug
fbshipit-source-id: 39c0f95f8e9ff1c7ca3a10787502a17f258d2334
Summary:
I wrote a couple tests using the public API to expose/prevent the bugs we talked. In particular,
- When files have overlapping endpoints and a range tombstone spans them, ensure the largest key does not reappear to readers. This was happening due to a bug that skipped writing range tombstones to an output file when their begin key exactly matched the file's largest key.
- When a tombstone spans multiple atomic compaction units, ensure newer keys do not disappear by being compacted beneath it. This happened due to a range tombstone appearing untruncated to readers when it spanned files with overlapping endpoints, even if it extended into files without overlapping endpoints (i.e., different atomic compaction units).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4476
Differential Revision: D10286001
Pulled By: ajkr
fbshipit-source-id: bb5ca51d0f90812fb37bfe1d01aec93f7eda55aa
Summary:
There is a bug when the write queue leader is blocked on a write
delay/stop, and the queue has writers with WriteOptions::no_slowdown set
to true. They are not woken up until the write stall is cleared.
The fix introduces a dummy writer inserted at the tail to indicate a
write stall and prevent further inserts into the queue, and a condition
variable that writers who can tolerate slowdown wait on before adding
themselves to the queue. The leader calls WriteThread::BeginWriteStall()
to add the dummy writer and then walk the queue to fail any writers with
no_slowdown set. Once the stall clears, the leader calls
WriteThread::EndWriteStall() to remove the dummy writer and signal the
condition variable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4475
Differential Revision: D10285827
Pulled By: anand1976
fbshipit-source-id: 747465e5e7f07a829b1fb0bc1afcd7b93f4ab1a9
Summary:
this avoids a few copies of std::string and other structs
in the context of range-based for loops. instead of copying
the values for each iteration, use a const reference to avoid
copying.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4459
Differential Revision: D10282045
Pulled By: sagar0
fbshipit-source-id: 5012e910dca279abd2be847e1fb432d96274edfb
Summary:
To more accurately truncate range tombstones at SST boundaries,
we now represent them in RangeDelAggregator using InternalKeys, which
are end-key-exclusive as they were before this change.
During compaction, "atomic compaction unit boundaries" (the range of
keys contained in neighbouring and overlaping SSTs) are propagated down
to RangeDelAggregator to truncate range tombstones at those boundariies
instead. See https://github.com/facebook/rocksdb/pull/4432#discussion_r221072219 and https://github.com/facebook/rocksdb/pull/4432#discussion_r221138683
for motivating examples.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4432
Differential Revision: D10263952
Pulled By: abhimadan
fbshipit-source-id: 2fe85ff8a02b3a6a2de2edfe708012797a7bd579
Summary:
Currently statistics are supposed to be dumped to info log at intervals of `options.stats_dump_period_sec`. However the implementation choice was to bind it with compaction thread, meaning if the database has been serving very light traffic, the stats may not get dumped at all.
We decided to separate stats dumping into a new timed thread using `TimerQueue`, which is already used in blob_db. This will allow us schedule new timed tasks with more deterministic behavior.
Tested with db_bench using `--stats_dump_period_sec=20` in command line:
> LOG:2018/09/17-14:07:45.575025 7fe99fbfe700 [WARN] [db/db_impl.cc:605] ------- DUMPING STATS -------
LOG:2018/09/17-14:08:05.643286 7fe99fbfe700 [WARN] [db/db_impl.cc:605] ------- DUMPING STATS -------
LOG:2018/09/17-14:08:25.691325 7fe99fbfe700 [WARN] [db/db_impl.cc:605] ------- DUMPING STATS -------
LOG:2018/09/17-14:08:45.740989 7fe99fbfe700 [WARN] [db/db_impl.cc:605] ------- DUMPING STATS -------
LOG content:
> 2018/09/17-14:07:45.575025 7fe99fbfe700 [WARN] [db/db_impl.cc:605] ------- DUMPING STATS -------
2018/09/17-14:07:45.575080 7fe99fbfe700 [WARN] [db/db_impl.cc:606]
** DB Stats **
Uptime(secs): 20.0 total, 20.0 interval
Cumulative writes: 4447K writes, 4447K keys, 4447K commit groups, 1.0 writes per commit group, ingest: 5.57 GB, 285.01 MB/s
Cumulative WAL: 4447K writes, 0 syncs, 4447638.00 writes per sync, written: 5.57 GB, 285.01 MB/s
Cumulative stall: 00:00:0.012 H:M:S, 0.1 percent
Interval writes: 4447K writes, 4447K keys, 4447K commit groups, 1.0 writes per commit group, ingest: 5700.71 MB, 285.01 MB/s
Interval WAL: 4447K writes, 0 syncs, 4447638.00 writes per sync, written: 5.57 MB, 285.01 MB/s
Interval stall: 00:00:0.012 H:M:S, 0.1 percent
** Compaction Stats [default] **
Level Files Size Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) Comp(cnt) Avg(sec) KeyIn KeyDrop
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4382
Differential Revision: D9933051
Pulled By: miasantreble
fbshipit-source-id: 6d12bb1e4977674eea4bf2d2ac6d486b814bb2fa
Summary:
- Fix DBImpl API race condition
The timeline of execution flow is as follow:
```
timeline user_thread1 user_thread2
t1 | cfh = GetColumnFamilyHandleUnlocked(0)
t2 | id1 = cfh->GetID()
t3 | GetColumnFamilyHandleUnlocked(1)
t4 | id2 = cfh->GetID()
V
```
The original implementation return a pointer to a stateful variable, so that the return `ColumnFamilyHandle` will be changed when another thread calls `GetColumnFamilyHandleUnlocked` with different `column family id`
- Expose ColumnFamily ID to compaction event listener
- Fix the return status of `DBImpl::GetLatestSequenceForKey`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4391
Differential Revision: D10221243
Pulled By: yiwu-arbug
fbshipit-source-id: dec60ee9ff0c8261a2f2413a8506ec1063991993
Summary:
The controller you requested could not be found. PTAL
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4466
Differential Revision: D10241358
Pulled By: yiwu-arbug
fbshipit-source-id: 99664eb286860a6c8844d50efeb0ef6f0e10dd1e
Summary:
It also renames InstallMemtableFlushResults to MaybeInstallMemtableFlushResults to clarify its contract.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4464
Differential Revision: D10224918
Pulled By: maysamyabandeh
fbshipit-source-id: 04e3f2d8542002cb9f8010cb436f5152751b3cbe
Summary:
The contract of snprintf says that it returns "The number of characters that would have been written if n had been sufficiently large" http://www.cplusplus.com/reference/cstdio/snprintf/
The existing code however was assuming that the return value is the actual number of written bytes and uses that to reposition the starting point on the next call to snprintf. This leads to buffer overflow when the last call to snprintf has filled up the buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4465
Differential Revision: D10224080
Pulled By: maysamyabandeh
fbshipit-source-id: 40f44e122d15b0db439812a0a361167cf012de3e
