Summary:
People also use ON/OFF, TRUE/FALSE and other switch options that is allowed by cmake.
Closes https://github.com/facebook/rocksdb/pull/3814
Differential Revision: D7899032
Pulled By: ajkr
fbshipit-source-id: b71511af59e0a78eedafb639b5002c47050bf3c2
Summary:
This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction)
This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2.
Closes https://github.com/facebook/rocksdb/pull/3765
Differential Revision: D7747618
Pulled By: siying
fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
Summary:
Returning bytes_read causes the caller to call GetLastError()
to report failure but the lasterror may be overwritten by then
so we lose the error code.
Fix up CMake file to include xpress source code only when needed.
Fix warning for the uninitialized var.
Closes https://github.com/facebook/rocksdb/pull/3795
Differential Revision: D7832935
Pulled By: anand1976
fbshipit-source-id: 4be21affb9b85d361b96244f4ef459f492b7cb2b
Summary:
This replaces reading the rocksdb version by external shell script. This does not work reliably on Windows (I wander how it works on AppVeyor).
Closes https://github.com/facebook/rocksdb/pull/3737
Differential Revision: D7703106
Pulled By: ajkr
fbshipit-source-id: 4079c7c77431757e9ddc801363ed896b18fdbf23
Summary:
otherwise the env_librados_test executable will fail to link against
librados.
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Closes https://github.com/facebook/rocksdb/pull/3724
Differential Revision: D7631542
Pulled By: ajkr
fbshipit-source-id: 38afbf21f9aeb7dedfb840aba8b2f8b421f9edb0
Summary:
The introduction of the 3-way SSE4.2 optimized crc32c implementation in commit f54d7f5fea added the `HAVE_PCLMUL` definition when the compiler supports intrinsics for that instruction, but did not modify CMakeLists.txt to set that definition on MSVC when appropriate. As a result, 3-way SSE4.2 is not used in MSVC builds with CMake although it could be.
Since the existing test program in CMakeLists.txt for `HAVE_SSE42` already uses `_mm_clmulepi64_si128` which is a PCLMUL instruction, this PR sets `HAVE_PCLMUL` as well if that program builds successfully, fixing the problem.
Closes https://github.com/facebook/rocksdb/pull/3673
Differential Revision: D7473975
Pulled By: miasantreble
fbshipit-source-id: bc346b9eb38920e427aa1a253e6dd9811efa269e
Summary:
Possible interleaved execution of background compaction thread calling `FindObsoleteFiles (no full scan) / PurgeObsoleteFiles` and user thread calling `FindObsoleteFiles (full scan) / PurgeObsoleteFiles` can lead to race condition on which RocksDB attempts to delete a file twice. The second attempt will fail and return `IO error`. This may occur to other files, but this PR targets sst.
Also add a unit test to verify that this PR fixes the issue.
The newly added unit test `obsolete_files_test` has a test case for this scenario, implemented in `ObsoleteFilesTest#RaceForObsoleteFileDeletion`. `TestSyncPoint`s are used to coordinate the interleaving the `user_thread` and background compaction thread. They execute as follows
```
timeline user_thread background_compaction thread
t1 | FindObsoleteFiles(full_scan=false)
t2 | FindObsoleteFiles(full_scan=true)
t3 | PurgeObsoleteFiles
t4 | PurgeObsoleteFiles
V
```
When `user_thread` invokes `FindObsoleteFiles` with full scan, it collects ALL files in RocksDB directory, including the ones that background compaction thread have collected in its job context. Then `user_thread` will see an IO error when trying to delete these files in `PurgeObsoleteFiles` because background compaction thread has already deleted the file in `PurgeObsoleteFiles`.
To fix this, we make RocksDB remember which (SST) files have been found by threads after calling `FindObsoleteFiles` (see `DBImpl#files_grabbed_for_purge_`). Therefore, when another thread calls `FindObsoleteFiles` with full scan, it will not collect such files.
ajkr could you take a look and comment? Thanks!
Closes https://github.com/facebook/rocksdb/pull/3638
Differential Revision: D7384372
Pulled By: riversand963
fbshipit-source-id: 01489516d60012e722ee65a80e1449e589ce26d3
Summary:
Improving blob db FIFO eviction with the following changes,
* Change blob_dir_size to max_db_size. Take into account SST file size when computing DB size.
* FIFO now only take into account live sst files and live blob files. It is normal for disk usage to go over max_db_size because there are obsolete sst files and blob files pending deletion.
* FIFO eviction now also evict TTL blob files that's still open. It doesn't evict non-TTL blob files.
* If FIFO is triggered, it will pass an expiration and the current sequence number to compaction filter. Compaction filter will then filter inlined keys to evict those with an earlier expiration and smaller sequence number. So call LSM FIFO.
* Compaction filter also filter those blob indexes where corresponding blob file is gone.
* Add an event listener to listen compaction/flush event and update sst file size.
* Implement DB::Close() to make sure base db, as well as event listener and compaction filter, destruct before blob db.
* More blob db statistics around FIFO.
* Fix some locking issue when accessing a blob file.
Closes https://github.com/facebook/rocksdb/pull/3556
Differential Revision: D7139328
Pulled By: yiwu-arbug
fbshipit-source-id: ea5edb07b33dfceacb2682f4789bea61de28bbfa
Summary:
Issue #3370 Simple fixes to make RocksDB project working also as a submodule of other bigger one.
Closes https://github.com/facebook/rocksdb/pull/3372
Differential Revision: D6729595
Pulled By: ajkr
fbshipit-source-id: eee2589e7a7c4322873dff8510eebd050301c54c
Summary:
Make dependacies switches compatible with other OS builds
TODO: Make find_package work for Windows.
Closes https://github.com/facebook/rocksdb/pull/3322
Differential Revision: D6667637
Pulled By: sagar0
fbshipit-source-id: 5afcd7bbfe69465310a4fbc8e589f01e506b95f5
Summary:
**# Summary**
RocksDB uses SSE crc32 intrinsics to calculate the crc32 values but it does it in single way fashion (not pipelined on single CPU core). Intel's whitepaper () published an algorithm that uses 3-way pipelining for the crc32 intrinsics, then use pclmulqdq intrinsic to combine the values. Because pclmulqdq has overhead on its own, this algorithm will show perf gains on buffers larger than 216 bytes, which makes RocksDB a perfect user, since most of the buffers RocksDB call crc32c on is over 4KB. Initial db_bench show tremendous CPU gain.
This change uses the 3-way SSE algorithm by default. The old SSE algorithm is now behind a compiler tag NO_THREEWAY_CRC32C. If user compiles the code with NO_THREEWAY_CRC32C=1 then the old SSE Crc32c algorithm would be used. If the server does not have SSE4.2 at the run time the slow way (Non SSE) will be used.
**# Performance Test Results**
We ran the FillRandom and ReadRandom benchmarks in db_bench. ReadRandom is the point of interest here since it calculates the CRC32 for the in-mem buffers. We did 3 runs for each algorithm.
Before this change the CRC32 value computation takes about 11.5% of total CPU cost, and with the new 3-way algorithm it reduced to around 4.5%. The overall throughput also improved from 25.53MB/s to 27.63MB/s.
1) ReadRandom in db_bench overall metrics
PER RUN
Algorithm | run | micros/op | ops/sec |Throughput (MB/s)
3-way | 1 | 4.143 | 241387 | 26.7
3-way | 2 | 3.775 | 264872 | 29.3
3-way | 3 | 4.116 | 242929 | 26.9
FastCrc32c|1 | 4.037 | 247727 | 27.4
FastCrc32c|2 | 4.648 | 215166 | 23.8
FastCrc32c|3 | 4.352 | 229799 | 25.4
AVG
Algorithm | Average of micros/op | Average of ops/sec | Average of Throughput (MB/s)
3-way | 4.01 | 249,729 | 27.63
FastCrc32c | 4.35 | 230,897 | 25.53
2) Crc32c computation CPU cost (inclusive samples percentage)
PER RUN
Implementation | run | TotalSamples | Crc32c percentage
3-way | 1 | 4,572,250,000 | 4.37%
3-way | 2 | 3,779,250,000 | 4.62%
3-way | 3 | 4,129,500,000 | 4.48%
FastCrc32c | 1 | 4,663,500,000 | 11.24%
FastCrc32c | 2 | 4,047,500,000 | 12.34%
FastCrc32c | 3 | 4,366,750,000 | 11.68%
**# Test Plan**
make -j64 corruption_test && ./corruption_test
By default it uses 3-way SSE algorithm
NO_THREEWAY_CRC32C=1 make -j64 corruption_test && ./corruption_test
make clean && DEBUG_LEVEL=0 make -j64 db_bench
make clean && DEBUG_LEVEL=0 NO_THREEWAY_CRC32C=1 make -j64 db_bench
Closes https://github.com/facebook/rocksdb/pull/3173
Differential Revision: D6330882
Pulled By: yingsu00
fbshipit-source-id: 8ec3d89719533b63b536a736663ca6f0dd4482e9
Summary:
Divide ReadBlockContents() to multiple sub-functions. Maintaining the input and intermediate data in a new class BlockFetcher.
I hope in general it makes the code easier to maintain.
Another motivation to do it is to clearly divide the logic before file reading and after file reading. The refactor will help us evaluate how can we make I/O async in the future.
Closes https://github.com/facebook/rocksdb/pull/3244
Differential Revision: D6520983
Pulled By: siying
fbshipit-source-id: 338d90bc0338472d46be7a7682028dc9114b12e9
Summary:
We should use it if available otherwise the tools builds never work. Thanks to #3212, we can set -DGFLAGS=1 and it'll be independent of the namespace with which gflags was compiled.
Closes https://github.com/facebook/rocksdb/pull/3214
Differential Revision: D6462214
Pulled By: ajkr
fbshipit-source-id: db4e5f1b905322e3119554a9d01b57532c499384
Summary:
Bring CMakeLists.txt back up to parity with build_detect_platform.
Closes https://github.com/facebook/rocksdb/pull/3211
Differential Revision: D6452908
Pulled By: ajkr
fbshipit-source-id: 93f5f336ad7eff6ecf65dec47bfaf114dd24cfb2
Summary:
The current implementation of PinnableSlice move assignment have an issue #3163. We are moving away from it instead of try to get the move assignment right, since it is too tricky.
Closes https://github.com/facebook/rocksdb/pull/3164
Differential Revision: D6319201
Pulled By: yiwu-arbug
fbshipit-source-id: 8f3279021f3710da4a4caa14fd238ed2df902c48
Summary:
Move WritePreparedTxnDB from pessimistic_transaction_db.h to its own header, write_prepared_txn_db.h
Closes https://github.com/facebook/rocksdb/pull/3114
Differential Revision: D6220987
Pulled By: maysamyabandeh
fbshipit-source-id: 18893fb4fdc6b809fe117dabb544080f9b4a301b
Summary:
it turns out that, with older GCC shipped from centos7, the SSE42
intrinsics are not available even with "target" specified. so we
need to pass "-msse42" for checking compiler's sse4.2 support and
for building crc32c.cc which uses sse4.2 intrinsics for crc32.
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Closes https://github.com/facebook/rocksdb/pull/2950
Differential Revision: D6032298
Pulled By: siying
fbshipit-source-id: 124c946321043661b3fb0a70b6cdf4c9c5126ab4
Summary:
Update Compaction/Flush to support WritePreparedTxnDB: Add SnapshotChecker which is a proxy to query WritePreparedTxnDB::IsInSnapshot. Pass SnapshotChecker to DBImpl on WritePreparedTxnDB open. CompactionIterator use it to check if a key has been committed and if it is visible to a snapshot. In CompactionIterator:
* check if key has been committed. If not, output uncommitted keys AS-IS.
* use SnapshotChecker to check if key is visible to a snapshot when in need.
* do not output key with seq = 0 if the key is not committed.
Closes https://github.com/facebook/rocksdb/pull/2926
Differential Revision: D5902907
Pulled By: yiwu-arbug
fbshipit-source-id: 945e037fdf0aa652dc5ba0ad879461040baa0320
Summary:
Add kTypeBlobIndex value type, which will be used by blob db only, to insert a (key, blob_offset) KV pair. The purpose is to
1. Make it possible to open existing rocksdb instance as blob db. Existing value will be of kTypeIndex type, while value inserted by blob db will be of kTypeBlobIndex.
2. Make rocksdb able to detect if the db contains value written by blob db, if so return error.
3. Make it possible to have blob db optionally store value in SST file (with kTypeValue type) or as a blob value (with kTypeBlobIndex type).
The root db (DBImpl) basically pretended kTypeBlobIndex are normal value on write. On Get if is_blob is provided, return whether the value read is of kTypeBlobIndex type, or return Status::NotSupported() status if is_blob is not provided. On scan allow_blob flag is pass and if the flag is true, return wether the value is of kTypeBlobIndex type via iter->IsBlob().
Changes on blob db side will be in a separate patch.
Closes https://github.com/facebook/rocksdb/pull/2886
Differential Revision: D5838431
Pulled By: yiwu-arbug
fbshipit-source-id: 3c5306c62bc13bb11abc03422ec5cbcea1203cca
Summary:
Hello,
current master branch declares cmake_minimum_required (VERSION 2.8.11)
but cmake gives the following error:
[ 6%] CMake Error at CMakeLists.txt:658 (install):
install TARGETS given unknown argument "INCLUDES".
CMake Error at src/CMakeLists.txt:658 (install): install TARGETS given unknown argument "INCLUDES".
because this argument not supported on CMake versions prior 2.8.12
Closes https://github.com/facebook/rocksdb/pull/2904
Differential Revision: D5863430
Pulled By: yiwu-arbug
fbshipit-source-id: 0f7230e080add472ad4b87836b3104ea0b971a38
Summary:
snprintf is defined as _snprintf, which doesn't exist in the std
namespace.
Closes https://github.com/facebook/rocksdb/pull/2298
Differential Revision: D5070457
Pulled By: yiwu-arbug
fbshipit-source-id: 6e1659ac3e86170653b174578da5a8ed16812cbb
Summary:
because it is not only platform independent
but also allows to override the build date
This helps to make ceph builds reproducible (that includes a fork of rockdb in a submodule)
Also adds UTC flag, to be independent of timezone.
Requires cmake-2.8.11+ from 2013
Closes https://github.com/facebook/rocksdb/pull/2848
Differential Revision: D5820189
Pulled By: yiwu-arbug
fbshipit-source-id: e3e8c1550e10e238c173f6c5d9ba15f71ad3ce28
Summary:
Some compilers require `-std=c++11` for the `cstdint` header to be available. We already have logic to add `-std=c++11` to `CXXFLAGS` when the compiler is not MSVC; simply reorder CMakeLists.txt so that logic happens before the calls to `CHECK_CXX_SOURCE_COMPILES`.
Additionally add a missing `set(CMAKE_REQUIRED_FLAGS, ...)` before a call to `CHECK_C_SOURCE_COMPILES`.
Closes https://github.com/facebook/rocksdb/pull/2535
Differential Revision: D5384244
Pulled By: yiwu-arbug
fbshipit-source-id: 2dbae4297c5d8ab4636e08b1457ffb2d3e37aef4
Summary:
This patch splits Commit and Prepare into lock-related logic and db-write-related logic. It moves lock-related logic to PessimisticTransaction to be reused by all children classes and movies the existing impl of db-write-related to PrepareInternal, CommitSingleInternal, and CommitInternal in WriteCommittedTxnImpl.
Closes https://github.com/facebook/rocksdb/pull/2691
Differential Revision: D5569464
Pulled By: maysamyabandeh
fbshipit-source-id: d1b8698e69801a4126c7bc211745d05c636f5325
Summary:
This opens space for the new implementations of TransactionDBImpl such as WritePreparedTxnDBImpl that has a different policy of how to write to DB.
Closes https://github.com/facebook/rocksdb/pull/2689
Differential Revision: D5568918
Pulled By: maysamyabandeh
fbshipit-source-id: f7eac866e175daf3793ae79da108f65cc7dc7b25
Summary:
This patch refactors TransactionImpl by separating the logic for pessimistic concurrency control from the implementation of how to write the data to rocksdb. The existing implementation is named WriteCommittedTxnImpl as it writes committed data to the db. A template named WritePreparedTxnImpl is also added which will be later completed to provide a an alternative implementation.
Closes https://github.com/facebook/rocksdb/pull/2676
Differential Revision: D5549998
Pulled By: maysamyabandeh
fbshipit-source-id: 16298e86b43ca4849324c1f35c731913c6d17bec
Summary:
* Dump blob db options to info log
* Remove BlobDBOptionsImpl to disallow dynamic cast *BlobDBOptions into *BlobDBOptionsImpl. Move options there to be constants or into BlobDBOptions. The dynamic cast is broken after #2645
* Change some of the default options
* Remove blob_db_options.min_blob_size, which is unimplemented. Will implement it soon.
Closes https://github.com/facebook/rocksdb/pull/2671
Differential Revision: D5529912
Pulled By: yiwu-arbug
fbshipit-source-id: dcd58ca981db5bcc7f123b65a0d6f6ae0dc703c7
Summary:
Simple component that will add a new entry in a log file every time we lookup/insert a key in SimCache.
API:
```
SimCache::StartActivityLogging(<file_name>, <env>, <optional_max_size>)
SimCache::StopActivityLogging()
```
Sending for review, Still need to add more comments.
I was thinking about a better approach, but I ended up deciding I will use a mutex to sync the writes to the file, since this feature should not be heavily used and only used to collect info that will be analyzed offline. I think it's okay to hold the mutex every time we lookup/add to the SimCache.
Closes https://github.com/facebook/rocksdb/pull/2295
Differential Revision: D5063826
Pulled By: IslamAbdelRahman
fbshipit-source-id: f3b5daed8b201987c9a071146ddd5c5740a2dd8c
Summary:
Introducing blob_db::TTLExtractor to replace extract_ttl_fn. The TTL
extractor can be use to extract TTL from keys insert with Put or
WriteBatch. Change over existing extract_ttl_fn are:
* If value is changed, it will be return via std::string* (rather than Slice*). With Slice* the new value has to be part of the existing value. With std::string* the limitation is removed.
* It can optionally return TTL or expiration.
Other changes in this PR:
* replace `std::chrono::system_clock` with `Env::NowMicros` so that I can mock time in tests.
* add several TTL tests.
* other minor naming change.
Closes https://github.com/facebook/rocksdb/pull/2659
Differential Revision: D5512627
Pulled By: yiwu-arbug
fbshipit-source-id: 0dfcb00d74d060b8534c6130c808e4d5d0a54440
Summary:
Major changes in this PR:
* Implement CassandraCompactionFilter to remove expired columns and rows (if all column expired)
* Move cassandra related code from utilities/merge_operators/cassandra to utilities/cassandra/*
* Switch to use shared_ptr<> from uniqu_ptr for Column membership management in RowValue. Since columns do have multiple owners in Merge and GC process, use shared_ptr helps make RowValue immutable.
* Rename cassandra_merge_test to cassandra_functional_test and add two TTL compaction related tests there.
Closes https://github.com/facebook/rocksdb/pull/2588
Differential Revision: D5430010
Pulled By: wpc
fbshipit-source-id: 9566c21e06de17491d486a68c70f52d501f27687
Summary:
Unfortunately we can't use -DNDEBUG yet since we don't properly exclude the test libraries/executables from the non-debug builds on non-MSVC platforms. Previously this was failing on Linux for every build type except `CMAKE_BUILD_TYPE=Debug`.
Reverts a48a62d
Closes https://github.com/facebook/rocksdb/pull/2595
Differential Revision: D5436182
Pulled By: ajkr
fbshipit-source-id: 062f07cc9ce06a073b66054722b27bac1890dca3
Summary:
Instead of ignoring UBSan checks, fix the negative shifts in
Hash(). Also add test to make sure the hash values are stable over
time. The values were computed before this change, so the test also
verifies the correctness of the change.
Closes https://github.com/facebook/rocksdb/pull/2546
Differential Revision: D5386369
Pulled By: yiwu-arbug
fbshipit-source-id: 6de4b44461a544d6222cc5d72d8cda2c0373d17e
Summary:
1. The buckifier script assume each test "foo" comes with a .cc file of the same name (i.e. foo.cc). Update cassandra tests to follow this pattern so that the buckifier script can recognize them.
2. add blob_db_test
Closes https://github.com/facebook/rocksdb/pull/2506
Differential Revision: D5331517
Pulled By: yiwu-arbug
fbshipit-source-id: 86f3eba471fc621186ab44cbd073b6162cde8e57
Summary:
This PR adds support for encrypting data stored by RocksDB when written to disk.
It adds an `EncryptedEnv` override of the `Env` class with matching overrides for sequential&random access files.
The encryption itself is done through a configurable `EncryptionProvider`. This class creates is asked to create `BlockAccessCipherStream` for a file. This is where the actual encryption/decryption is being done.
Currently there is a Counter mode implementation of `BlockAccessCipherStream` with a `ROT13` block cipher (NOTE the `ROT13` is for demo purposes only!!).
The Counter operation mode uses an initial counter & random initialization vector (IV).
Both are created randomly for each file and stored in a 4K (default size) block that is prefixed to that file. The `EncryptedEnv` implementation is such that clients of the `Env` class do not see this prefix (nor data, nor in filesize).
The largest part of the prefix block is also encrypted, and there is room left for implementation specific settings/values/keys in there.
To test the encryption, the `DBTestBase` class has been extended to consider a new environment variable called `ENCRYPTED_ENV`. If set, the test will setup a encrypted instance of the `Env` class to use for all tests.
Typically you would run it like this:
```
ENCRYPTED_ENV=1 make check_some
```
There is also an added test that checks that some data inserted into the database is or is not "visible" on disk. With `ENCRYPTED_ENV` active it must not find plain text strings, with `ENCRYPTED_ENV` unset, it must find the plain text strings.
Closes https://github.com/facebook/rocksdb/pull/2424
Differential Revision: D5322178
Pulled By: sdwilsh
fbshipit-source-id: 253b0a9c2c498cc98f580df7f2623cbf7678a27f
