Commit Graph

159 Commits

Author SHA1 Message Date
Akanksha Mahajan
27d57a035e Use SST file manager to track blob files as well (#8037)
Summary:
Extend support to track blob files in SST File manager.
 This PR notifies SstFileManager whenever a new blob file is created,
 via OnAddFile and  an obsolete blob file deleted via OnDeleteFile
 and delete file via ScheduleFileDeletion.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8037

Test Plan: Add new unit tests

Reviewed By: ltamasi

Differential Revision: D26891237

Pulled By: akankshamahajan15

fbshipit-source-id: 04c69ccfda2a73782fd5c51982dae58dd11979b6
2021-03-17 20:44:49 -07:00
mrambacher
3dff28cf9b Use SystemClock* instead of std::shared_ptr<SystemClock> in lower level routines (#8033)
Summary:
For performance purposes, the lower level routines were changed to use a SystemClock* instead of a std::shared_ptr<SystemClock>.  The shared ptr has some performance degradation on certain hardware classes.

For most of the system, there is no risk of the pointer being deleted/invalid because the shared_ptr will be stored elsewhere.  For example, the ImmutableDBOptions stores the Env which has a std::shared_ptr<SystemClock> in it.  The SystemClock* within the ImmutableDBOptions is essentially a "short cut" to gain access to this constant resource.

There were a few classes (PeriodicWorkScheduler?) where the "short cut" property did not hold.  In those cases, the shared pointer was preserved.

Using db_bench readrandom perf_level=3 on my EC2 box, this change performed as well or better than 6.17:

6.17: readrandom   :      28.046 micros/op 854902 ops/sec;   61.3 MB/s (355999 of 355999 found)
6.18: readrandom   :      32.615 micros/op 735306 ops/sec;   52.7 MB/s (290999 of 290999 found)
PR: readrandom   :      27.500 micros/op 871909 ops/sec;   62.5 MB/s (367999 of 367999 found)

(Note that the times for 6.18 are prior to revert of the SystemClock).

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8033

Reviewed By: pdillinger

Differential Revision: D27014563

Pulled By: mrambacher

fbshipit-source-id: ad0459eba03182e454391b5926bf5cdd45657b67
2021-03-15 04:34:11 -07:00
Akanksha Mahajan
ea8bb82fc7 Add support for IOTracing in blob files (#7958)
Summary:
Add support for IOTracing in blob files

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7958

Test Plan:
Add a new test and checked manually the trace_file for blob
files being recorded during read and write.

Reviewed By: ltamasi

Differential Revision: D26415950

Pulled By: akankshamahajan15

fbshipit-source-id: 49c2859b3a4f8307e7cb69a92704403a4da46d44
2021-02-16 09:49:10 -08:00
Zhichao Cao
d1c510baec Handoff checksum Implementation (#7523)
Summary:
in PR https://github.com/facebook/rocksdb/issues/7419 , we introduce the new Append and PositionedAppend APIs to WritableFile at File System, which enable RocksDB to pass the data verification information (e.g., checksum of the data) to the lower layer. In this PR, we use the new API in WritableFileWriter, such that the file created via WritableFileWrite can pass the checksum to the storage layer. To control which types file should apply the checksum handoff, we add checksum_handoff_file_types to DBOptions. User can use this option to control which file types (Currently supported file tyes: kLogFile, kTableFile, kDescriptorFile.) should use the new Append and PositionedAppend APIs to handoff the verification information.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7523

Test Plan: add new unit test, pass make check/ make asan_check

Reviewed By: pdillinger

Differential Revision: D24313271

Pulled By: zhichao-cao

fbshipit-source-id: aafd69091ae85c3318e3e17cbb96fe7338da11d0
2021-02-10 22:20:32 -08:00
mrambacher
12f1137355 Add a SystemClock class to capture the time functions of an Env (#7858)
Summary:
Introduces and uses a SystemClock class to RocksDB.  This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock.

Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead.  There are likely more places that can be changed, but this is a start to show what can/should be done.  Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock.

There are several Env classes that implement these functions.  Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR.  It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc).

Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858

Reviewed By: pdillinger

Differential Revision: D26006406

Pulled By: mrambacher

fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90
2021-01-25 22:09:11 -08:00
Yanqin Jin
76ef894f9f Add full_history_ts_low_ to FlushJob (#7655)
Summary:
https://github.com/facebook/rocksdb/issues/7556 enables `CompactionIterator` to perform garbage collection during compaction according
to a lower bound (user-defined) timestamp `full_history_ts_low_`.
This PR adds a data member `full_history_ts_low_` of type `std::string` to `FlushJob`, and
`full_history_ts_low_` does not change during flush. `FlushJob` will pass a pointer to this data member
to the `CompactionIterator` used during flush.

Also refactored flush_job_test.cc to re-use some existing code, which is actually the majority of this PR.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7655

Test Plan: make check

Reviewed By: ltamasi

Differential Revision: D24933340

Pulled By: riversand963

fbshipit-source-id: 2e584bfd0cf6e5c295ab1af264e68e9d6a12fca3
2020-11-12 18:44:34 -08:00
Andrew Kryczka
1adbceb581 Expand effect of dictionary settings in ColumnFamilyOptions::compression_opts (#7619)
Summary:
In dictionary compression's initial implementation, in order to save CPU overhead, we only enabled it
for bottom level under the assumption that the vast majority of data is
stored there. At that time, there was no
such thing as `ColumnFamilyOptions::bottommost_compression_opts`, so we just
hardcoded disabling dictionary compression in flush and compactions to
non-bottommost level. Now, we have users who generate all their files
through flush and are considering using dictionary compression.

To support such a use case, this PR expands the scope of `ColumnFamilyOptions::compression_opts` to
additionally include flushed files and files generated by compaction to
a non-bottommost level. Users can still get the old behavior by moving
their dictionary settings to `ColumnFamilyOptions::bottommost_compression_opts`
and explicitly enabling both that and `ColumnFamilyOptions::bottommost_compression`.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7619

Reviewed By: ltamasi

Differential Revision: D24665610

Pulled By: ajkr

fbshipit-source-id: 656b90bce1033fe21c71e09af931ef5bde3e464c
2020-11-02 19:21:11 -08:00
Levi Tamasi
a7a04b6898 Integrate BlobFileBuilder into the compaction process (#7573)
Summary:
Similarly to how https://github.com/facebook/rocksdb/issues/7345
integrated blob file writing into the flush process,
the patch adds support for writing blob files to the compaction logic.
Namely, if `enable_blob_files` is set, large values encountered during
compaction are extracted to blob files and replaced with blob indexes.
The resulting blob files are then logged to the MANIFEST as part of the
compaction job's `VersionEdit` and added to the `Version` alongside any
table files written by the compaction. Any errors during blob file building fail
the compaction job.

There will be a separate follow-up patch to perform blob garbage collection
during compactions.

In addition, the patch continues to chip away at the mess around computing
various compaction related statistics by eliminating some code duplication
and by making the `num_output_files` and `bytes_written` stats more consistent
for flushes, compactions, and recovery.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7573

Test Plan: `make check`

Reviewed By: riversand963

Differential Revision: D24404696

Pulled By: ltamasi

fbshipit-source-id: 21216af3a172ad3ce8f85d11cd30923784ae426c
2020-10-26 13:51:55 -07:00
Yanqin Jin
758ead5df7 Enforce status check for corruption_test (#7453)
Summary:
Enforce status check for corruption_test.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7453

Test Plan:
```
ASSERT_STATUS_CHECKED=1 make corruption_test
./corruption_test
```

Reviewed By: jay-zhuang

Differential Revision: D24006862

Pulled By: riversand963

fbshipit-source-id: 664677caf4c3007a25cf565cec3d677f2dcea130
2020-10-02 22:11:00 -07:00
sdong
7508175558 Introduce options.check_flush_compaction_key_order (#7467)
Summary:
Introduce an new option options.check_flush_compaction_key_order, by default set to true, which checks key order of flush and compaction, and fail the operation if the order is violated.
Also did minor refactor hash checking code, which consolidates the hashing logic to a vlidation class, where the key ordering logic is added.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7467

Test Plan: Add unit tests to validate the check can catch reordering in flush and compaction, and can be properly disabled.

Reviewed By: riversand963

Differential Revision: D24010683

fbshipit-source-id: 8dd6292d2cda8006054e9ded7cfa4bf405f0527c
2020-10-01 10:10:26 -07:00
Akanksha Mahajan
9d212d3f0e Provide users with option to opt-in to get corrupt data in logs/messages (#7420)
Summary:
Add a new Option "allow_data_in_errors". When it's set by users, it allows them to opt-in to get error messages containing corrupted keys/values. Corrupt keys, values will be logged in the messages, logs, status etc. that will help users with the useful information regarding affected data.
By default value is set false to prevent users data to be exposed in the messages.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7420

Test Plan:
1. make check -j64
           2. Add a new test case

Reviewed By: ajkr

Differential Revision: D23835028

Pulled By: akankshamahajan15

fbshipit-source-id: 8d2eba8fb898e79fcf1fccc07295065a75eb59b1
2020-09-29 23:17:45 -07:00
sdong
d08a9005b7 Make db_basic_test pass assert status checked (#7452)
Summary:
Add db_basic_test status check list. Some of the warnings are suppressed. It is possible that some of them are due to real bugs.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7452

Test Plan: See CI tests pass.

Reviewed By: zhichao-cao

Differential Revision: D23979764

fbshipit-source-id: 6151570c2a9b931b0fbb3fe939a94b2bd1583cbe
2020-09-29 09:49:04 -07:00
Zhichao Cao
485fd9d9db fix the flaky test failure (#7415)
Summary:
Fix the flaky test failure in error_handler_fs_test. Add the sync point, solve the dependency.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7415

Test Plan: make asan_check, ~/gtest-parallel/gtest-parallel -r 100 ./error_handler_fs_test

Reviewed By: siying

Differential Revision: D23804330

Pulled By: zhichao-cao

fbshipit-source-id: 5175108651f7652e47e15978f2a9c1669ef59d80
2020-09-19 17:57:54 -07:00
mrambacher
a08d6f18f0 Add more tests to ASSERT_STATUS_CHECKED (#7367)
Summary:
db_options_test
options_file_test
auto_roll_logger_test
options_util_test
persistent_cache_test

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7367

Reviewed By: jay-zhuang

Differential Revision: D23712520

Pulled By: zhichao-cao

fbshipit-source-id: 99b331e357f5d6a6aabee89d1bd933002cbb3908
2020-09-16 15:48:07 -07:00
Levi Tamasi
b0e7834100 Integrate blob file writing with the flush logic (#7345)
Summary:
The patch adds support for writing blob files during flush by integrating
`BlobFileBuilder` with the flush logic, most importantly, `BuildTable` and
`CompactionIterator`. If `enable_blob_files` is set, large values are extracted
to blob files and replaced with references. The resulting blob files are then
logged to the MANIFEST as part of the flush job's `VersionEdit` and
added to the `Version`, similarly to table files. Errors related to writing
blob files fail the flush, and any blob files written by such jobs are immediately
deleted (again, similarly to how SST files are handled). In addition, the patch
extends the logging and statistics around flushes to account for the presence
of blob files (e.g. `InternalStats::CompactionStats::bytes_written`, which is
used for calculating write amplification, now considers the blob files as well).

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7345

Test Plan: Tested using `make check` and `db_bench`.

Reviewed By: riversand963

Differential Revision: D23506369

Pulled By: ltamasi

fbshipit-source-id: 646885f22dfbe063f650d38a1fedc132f499a159
2020-09-14 21:11:43 -07:00
Akanksha Mahajan
b175eceb09 Store FSWritableFilePtr object in WritableFileWriter (#7193)
Summary:
Replace FSWritableFile pointer with FSWritableFilePtr
    object in WritableFileWriter.
    This new object wraps FSWritableFile pointer.

    Objective: If tracing is enabled, FSWritableFile Ptr returns
    FSWritableFileTracingWrapper pointer that includes all necessary
    information in IORecord and calls underlying FileSystem and invokes
    IOTracer to dump that record in a binary file. If tracing is disabled
    then, underlying FileSystem pointer is returned directly.
    FSWritableFilePtr wrapper class is added to bypass the
    FSWritableFileWrapper when
    tracing is disabled.

    Test Plan: make check -j64

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7193

Reviewed By: anand1976

Differential Revision: D23355915

Pulled By: akankshamahajan15

fbshipit-source-id: e62a27a13c1fd77e36a6dbafc7006d969bed25cf
2020-09-08 10:56:08 -07:00
Zhichao Cao
d51f88c9e4 Pass SST file checksum information through OnTableFileCreated (#7108)
Summary:
When SST file is created, application is able to know the file information through OnTableFileCreated callback in LogAndNotifyTableFileCreationFinished. Since file checksum information can be useful for application when the SST file is created, we add file_checksum and file_checksum_func_name information to TableFileCreationInfo, which will be passed through OnTableFileCreated.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7108

Test Plan: make check, listener_test.

Reviewed By: ajkr

Differential Revision: D22470240

Pulled By: zhichao-cao

fbshipit-source-id: 92c20344d9b986eadfe3480f3769bf4add0dbaae
2020-08-25 10:46:11 -07:00
jsteemann
5e1808d515 fix typo: paraniod -> paranoid (#7163)
Summary:
Rename "paraniod" to "paranoid" in a few places.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7163

Reviewed By: ajkr

Differential Revision: D22678242

fbshipit-source-id: 28b1011a736d0a95612676f7e1b9500a70c324b4
2020-08-06 14:25:34 -07:00
Andrew Kryczka
a4a4a2dabd dedup ReadOptions in iterator hierarchy (#7210)
Summary:
Previously, a `ReadOptions` object was stored in every `BlockBasedTableIterator`
and every `LevelIterator`. This redundancy consumes extra memory,
resulting in the `Arena` making more allocations, and iteration
observing worse cache performance.

This PR migrates callers of `NewInternalIterator()` and
`MakeInputIterator()` to provide a `ReadOptions` object guaranteed to
outlive the returned iterator. When the iterator's lifetime will be managed by the
user, this lifetime guarantee is achieved by storing the `ReadOptions`
value in `ArenaWrappedDBIter`. Then, sub-iterators of `NewInternalIterator()` and
`MakeInputIterator()` can hold a reference-to-const `ReadOptions`.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7210

Test Plan:
- `make check` under ASAN and valgrind
- benchmark: on a DB with 2 L0 files and 3 L1+ levels, this PR reduced `Arena` allocation 4792 -> 4160 bytes.

Reviewed By: anand1976

Differential Revision: D22861323

Pulled By: ajkr

fbshipit-source-id: 54aebb3e89c872eeab0f5793b4b6e42878d093ce
2020-08-03 15:23:04 -07:00
mrambacher
d44cbc5314 Add hash of key/value checks when paranoid_file_checks=true (#7134)
Summary:
When paraoid_files_checks=true, a rolling key-value hash is generated and compared to what is written to the file.  If the values do not match, the SST file is rejected.

Code put in place for the check for both flush and compaction jobs.  Corresponding test added to corruption_test.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7134

Reviewed By: cheng-chang

Differential Revision: D22646149

fbshipit-source-id: 8fde1984a1a11edd3bd82a413acffc5ea7aa683f
2020-07-22 11:04:40 -07:00
Zhichao Cao
a10f12eda1 Auto resume the DB from Retryable IO Error (#6765)
Summary:
In current codebase, in write path, if Retryable IO Error happens, SetBGError is called. The retryable IO Error is converted to hard error and DB is in read only mode. User or application needs to resume it. In this PR, if Retryable IO Error happens in one DB, SetBGError will create a new thread to call Resume (auto resume). otpions.max_bgerror_resume_count controls if auto resume is enabled or not (if max_bgerror_resume_count<=0, auto resume will not be enabled). options.bgerror_resume_retry_interval controls the time interval to call Resume again if the previous resume fails due to the Retryable IO Error. If non-retryable error happens during resume, auto resume will terminate.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/6765

Test Plan: Added the unit test cases in error_handler_fs_test and pass make asan_check

Reviewed By: anand1976

Differential Revision: D21916789

Pulled By: zhichao-cao

fbshipit-source-id: acb8b5e5dc3167adfa9425a5b7fc104f6b95cb0b
2020-07-15 11:03:58 -07:00
Zitan Chen
94d04529de Store DB identity and DB session ID in SST files (#6983)
Summary:
`db_id` and `db_session_id` are now part of the table properties for all formats and stored in SST files. This adds about 99 bytes to each new SST file.

The `TablePropertiesNames` for these two identifiers are `rocksdb.creating.db.identity` and `rocksdb.creating.session.identity`.

In addition, SST files generated from SstFileWriter and Repairer have DB identity “SST Writer” and “DB Repairer”, respectively. Their DB session IDs are generated in the same way as `DB::GetDbSessionId`.

A table property test is added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6983

Test Plan: make check and some manual tests.

Reviewed By: zhichao-cao

Differential Revision: D22048826

Pulled By: gg814

fbshipit-source-id: afdf8c11424a6f509b5c0b06dafad584a80103c9
2020-06-17 10:57:40 -07:00
Andrew Kryczka
02db03af8d make L0 index/filter pinned memory usage predictable (#6911)
Summary:
Memory pinned by `pin_l0_filter_and_index_blocks_in_cache` needs to be predictable based on user config. This PR makes sure
we do not pin extra memory for large files generated by intra-L0 (see https://github.com/facebook/rocksdb/issues/6889).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6911

Test Plan: unit test

Reviewed By: siying

Differential Revision: D21835818

Pulled By: ajkr

fbshipit-source-id: a11a088549d06bed8aacc2548d266e5983f0ead4
2020-06-09 16:51:23 -07:00
Mike Kolupaev
e45673dece Properly report IO errors when IndexType::kBinarySearchWithFirstKey is used (#6621)
Summary:
Context: Index type `kBinarySearchWithFirstKey` added the ability for sst file iterator to sometimes report a key from index without reading the corresponding data block. This is useful when sst blocks are cut at some meaningful boundaries (e.g. one block per key prefix), and many seeks land between blocks (e.g. for each prefix, the ranges of keys in different sst files are nearly disjoint, so a typical seek needs to read a data block from only one file even if all files have the prefix). But this added a new error condition, which rocksdb code was really not equipped to deal with: `InternalIterator::value()` may fail with an IO error or Status::Incomplete, but it's just a method returning a Slice, with no way to report error instead. Before this PR, this type of error wasn't handled at all (an empty slice was returned), and kBinarySearchWithFirstKey implementation was considered a prototype.

Now that we (LogDevice) have experimented with kBinarySearchWithFirstKey for a while and confirmed that it's really useful, this PR is adding the missing error handling.

It's a pretty inconvenient situation implementation-wise. The error needs to be reported from InternalIterator when trying to access value. But there are ~700 call sites of `InternalIterator::value()`, most of which either can't hit the error condition (because the iterator is reading from memtable or from index or something) or wouldn't benefit from the deferred loading of the value (e.g. compaction iterator that reads all values anyway). Adding error handling to all these call sites would needlessly bloat the code. So instead I made the deferred value loading optional: only the call sites that may use deferred loading have to call the new method `PrepareValue()` before calling `value()`. The feature is enabled with a new bool argument `allow_unprepared_value` to a bunch of methods that create iterators (it wouldn't make sense to put it in ReadOptions because it's completely internal to iterators, with virtually no user-visible effect). Lmk if you have better ideas.

Note that the deferred value loading only happens for *internal* iterators. The user-visible iterator (DBIter) always prepares the value before returning from Seek/Next/etc. We could go further and add an API to defer that value loading too, but that's most likely not useful for LogDevice, so it doesn't seem worth the complexity for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6621

Test Plan: make -j5 check . Will also deploy to some logdevice test clusters and look at stats.

Reviewed By: siying

Differential Revision: D20786930

Pulled By: al13n321

fbshipit-source-id: 6da77d918bad3780522e918f17f4d5513d3e99ee
2020-04-15 17:40:44 -07:00
sdong
d0f3894cf1 In block based table builder, make variables for estimating file size atomic (#6636)
Summary:
With https://github.com/facebook/rocksdb/issues/6262, TSAN complains about data race of some variables. Those variables are used to estimate file size and are accessed in writer and background threads. Since file size estimation doesn't have to be 100% accurate, we make some variables atomic and use relaxed memory order.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6636

Test Plan: Run all tests with TSAN.

Reviewed By: anand1976

Differential Revision: D20820635

fbshipit-source-id: 1ea45ff38be15e33674ffe06b7d42fc9fe161ea5
2020-04-02 16:16:24 -07:00
Zhichao Cao
e8d332d97e Use FileChecksumGenFactory for SST file checksum (#6600)
Summary:
In the current implementation, sst file checksum is calculated by a shared checksum function object, which may make some checksum function hard to be applied here such as SHA1. In this implementation, each sst file will have its own checksum generator obejct, created by FileChecksumGenFactory. User needs to implement its own FilechecksumGenerator and Factory to plugin the in checksum calculation method.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6600

Test Plan: tested with make asan_check

Reviewed By: riversand963

Differential Revision: D20717670

Pulled By: zhichao-cao

fbshipit-source-id: 2a74c1c280ac11a07a1980185b43b671acaa71c6
2020-03-29 15:58:46 -07:00
Zhichao Cao
4246888101 Pass IOStatus to write path and set retryable IO Error as hard error in BG jobs (#6487)
Summary:
In the current code base, we use Status to get and store the returned status from the call. Specifically, for IO related functions, the current Status cannot reflect the IO Error details such as error scope, error retryable attribute, and others. With the implementation of https://github.com/facebook/rocksdb/issues/5761, we have the new Wrapper for IO, which returns IOStatus instead of Status. However, the IOStatus is purged at the lower level of write path and transferred to Status.

The first job of this PR is to pass the IOStatus to the write path (flush, WAL write, and Compaction). The second job is to identify the Retryable IO Error as HardError, and set the bg_error_ as HardError. In this case, the DB Instance becomes read only. User is informed of the Status and need to take actions to deal with it (e.g., call db->Resume()).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6487

Test Plan: Added the testing case to error_handler_fs_test. Pass make asan_check

Reviewed By: anand1976

Differential Revision: D20685017

Pulled By: zhichao-cao

fbshipit-source-id: ff85f042896243abcd6ef37877834e26f36b6eb0
2020-03-27 16:04:43 -07:00
sdong
fdf882ded2 Replace namespace name "rocksdb" with ROCKSDB_NAMESPACE (#6433)
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433

Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.

Differential Revision: D19977691

fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
2020-02-20 12:09:57 -08:00
Zhichao Cao
4369f2c7bb Checksum for each SST file and stores in MANIFEST (#6216)
Summary:
In the current code base, RocksDB generate the checksum for each block and verify the checksum at usage. Current PR enable SST file checksum. After a SST file is generated by Flush or Compaction, RocksDB generate the SST file checksum and store the checksum value and checksum method name in the vs_info and MANIFEST as part for the FileMetadata.

Added the enable_sst_file_checksum to Options to enable or disable file checksum. Added sst_file_checksum to Options such that user can plugin their own SST file checksum calculate method via overriding the SstFileChecksum class. The checksum information inlcuding uint32_t checksum value and a checksum name (string).  A new tool is added to LDB such that user can dump out a list of file checksum information from MANIFEST. If user enables the file checksum but does not provide the sst_file_checksum instance, RocksDB will use the default crc32checksum implemented in table/sst_file_checksum_crc32c.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6216

Test Plan: Added the testing case in table_test and ldb_cmd_test to verify checksum is correct in different level. Pass make asan_check.

Differential Revision: D19171461

Pulled By: zhichao-cao

fbshipit-source-id: b2e53479eefc5bb0437189eaa1941670e5ba8b87
2020-02-10 15:52:52 -08:00
anand76
afa2420c2b Introduce a new storage specific Env API (#5761)
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.

This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.

The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.

This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.

The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761

Differential Revision: D18868376

Pulled By: anand1976

fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
2019-12-13 14:48:41 -08:00
Levi Tamasi
5f025ea832 BlobDB GC: add SST <-> oldest blob file referenced mapping (#5903)
Summary:
This is groundwork for adding garbage collection support to BlobDB. The
patch adds logic that keeps track of the oldest blob file referred to by
each SST file. The oldest blob file is identified during flush/
compaction (similarly to how the range of keys covered by the SST is
identified), and persisted in the manifest as a custom field of the new
file edit record. Blob indexes with TTL are ignored for the purposes of
identifying the oldest blob file (since such blob files are cleaned up by the
TTL logic in BlobDB).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5903

Test Plan:
Added new unit tests; also ran db_bench in BlobDB mode, inspected the
manifest using ldb, and confirmed (by scanning the SST files using
sst_dump) that the value of the oldest blob file number field matches
the contents of the file for each SST.

Differential Revision: D17859997

Pulled By: ltamasi

fbshipit-source-id: 21662c137c6259a6af70446faaf3a9912c550e90
2019-10-14 15:21:01 -07:00
Yanqin Jin
6febfd8451 OnTableFileCreationCompleted use "(nil)" for empty file during flush (#5905)
Summary:
Compaction can call OnTableFileCreationCompleted(). If file is empty, "(nil)"
is used as the file name.
Do the same for flush.

Test plan (dev server):
```
make all
make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5905

Differential Revision: D17883285

Pulled By: riversand963

fbshipit-source-id: 6565884adbb00e8023d88b17dfb3b6eb92220b59
2019-10-14 09:54:10 -07:00
sdong
b931f84e56 Divide file_reader_writer.h and .cc (#5803)
Summary:
file_reader_writer.h and .cc contain several files and helper function, and it's hard to navigate. Separate it to multiple files and put them under file/
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5803

Test Plan: Build whole project using make and cmake.

Differential Revision: D17374550

fbshipit-source-id: 10efca907721e7a78ed25bbf74dc5410dea05987
2019-09-16 10:33:51 -07:00
haoyuhuang
705b8eecb4 Add more callers for table reader. (#5454)
Summary:
This PR adds more callers for table readers. These information are only used for block cache analysis so that we can know which caller accesses a block.
1. It renames the BlockCacheLookupCaller to TableReaderCaller as passing the caller from upstream requires changes to table_reader.h and TableReaderCaller is a more appropriate name.
2. It adds more table reader callers in table/table_reader_caller.h, e.g., kCompactionRefill, kExternalSSTIngestion, and kBuildTable.

This PR is long as it requires modification of interfaces in table_reader.h, e.g., NewIterator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5454

Test Plan: make clean && COMPILE_WITH_ASAN=1 make check -j32.

Differential Revision: D15819451

Pulled By: HaoyuHuang

fbshipit-source-id: b6caa704c8fb96ddd15b9a934b7e7ea87f88092d
2019-06-20 14:31:48 -07:00
Vijay Nadimpalli
49c5a12dbe Organizing rocksdb/db directory
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/5390

Differential Revision: D15579388

Pulled By: vjnadimpalli

fbshipit-source-id: 5bfc95e31554b8ff05b97b76d6534113f527f366
2019-05-31 11:57:01 -07:00
Siying Dong
8843129ece Move some memory related files from util/ to memory/ (#5382)
Summary:
Move arena, allocator, and memory tools under util to a separate memory/ directory.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5382

Differential Revision: D15564655

Pulled By: siying

fbshipit-source-id: 9cd6b5d0d3d52b39606e19221fa154596e5852a5
2019-05-30 17:44:09 -07:00
Vijay Nadimpalli
50e470791d Organizing rocksdb/table directory by format
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/5373

Differential Revision: D15559425

Pulled By: vjnadimpalli

fbshipit-source-id: 5d6d6d615582bedd96a4b879bb25d429a6de8b55
2019-05-30 14:51:11 -07:00
Siying Dong
e9e0101ca4 Move test related files under util/ to test_util/ (#5377)
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377

Differential Revision: D15551366

Pulled By: siying

fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
2019-05-30 11:25:51 -07:00
Siying Dong
545d206040 Move some file related files outside util/ (#5375)
Summary:
util/ means for lower level libraries, so it's a good idea to move the files which requires knowledge to DB out. Create a file/ and move some files there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5375

Differential Revision: D15550935

Pulled By: siying

fbshipit-source-id: 61a9715dcde5386eebfb43e93f847bba1ae0d3f2
2019-05-29 20:47:06 -07:00
Sagar Vemuri
d3d20dcdca Periodic Compactions (#5166)
Summary:
Introducing Periodic Compactions.

This feature allows all the files in a CF to be periodically compacted. It could help in catching any corruptions that could creep into the DB proactively as every file is constantly getting re-compacted.  And also, of course, it helps to cleanup data older than certain threshold.

- Introduced a new option `periodic_compaction_time` to control how long a file can live without being compacted in a CF.
- This works across all levels.
- The files are put in the same level after going through the compaction. (Related files in the same level are picked up as `ExpandInputstoCleanCut` is used).
- Compaction filters, if any, are invoked as usual.
- A new table property, `file_creation_time`, is introduced to implement this feature. This property is set to the time at which the SST file was created (and that time is given by the underlying Env/OS).

This feature can be enabled on its own, or in conjunction with `ttl`. It is possible to set a different time threshold for the bottom level when used in conjunction with ttl. Since `ttl` works only on 0 to last but one levels, you could set `ttl` to, say, 1 day, and `periodic_compaction_time` to, say, 7 days. Since `ttl < periodic_compaction_time` all files in last but one levels keep getting picked up based on ttl, and almost never based on periodic_compaction_time. The files in the bottom level get picked up for compaction based on `periodic_compaction_time`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5166

Differential Revision: D14884441

Pulled By: sagar0

fbshipit-source-id: 408426cbacb409c06386a98632dcf90bfa1bda47
2019-04-10 19:31:18 -07:00
Shobhit Dayal
b45b1cde3e Feature for sampling and reporting compressibility (#4842)
Summary:
This is a feature to sample data-block compressibility and and report them as stats. 1 in N (tunable) blocks is sampled for compressibility using two algorithms:
1. lz4 or snappy for fast compression
2. zstd or zlib for slow but higher compression.

The stats are reported to the caller as raw-bytes and compressed-bytes. The block continues to be compressed for storage using the specified CompressionType.

The db_bench_tool how has a command line option for specifying the sampling rate. It's default value is 0 (no sampling). To test the overhead for a certain value, users can compare the performance of db_bench_tool, varying the sampling rate. It is unlikely to have a noticeable impact for high values like 20.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4842

Differential Revision: D13629011

Pulled By: shobhitdayal

fbshipit-source-id: 14ca668bcab6499b2a1734edf848eb62a4f4fafa
2019-03-18 12:15:34 -07:00
Andrew Kryczka
c8c8104d7e Dictionary compression for files written by SstFileWriter (#4978)
Summary:
If `CompressionOptions::max_dict_bytes` and/or `CompressionOptions::zstd_max_train_bytes` are set, `SstFileWriter` will now generate files respecting those options.

I refactored the logic a bit for deciding when to use dictionary compression. Previously we plumbed `is_bottommost_level` down to the table builder and used that. However it was kind of confusing in `SstFileWriter`'s context since we don't know what level the file will be ingested to. Instead, now the higher-level callers (e.g., flush, compaction, file writer) are responsible for building the right `CompressionOptions` to give the table builder.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4978

Differential Revision: D14060763

Pulled By: ajkr

fbshipit-source-id: dc802c327896df2b319dc162d6acc82b9cdb452a
2019-02-14 11:23:55 -08:00
Andrew Kryczka
62f70f6d14 Reduce scope of compression dictionary to single SST (#4952)
Summary:
Our previous approach was to train one compression dictionary per compaction, using the first output SST to train a dictionary, and then applying it on subsequent SSTs in the same compaction. While this was great for minimizing CPU/memory/I/O overhead, it did not achieve good compression ratios in practice. In our most promising potential use case, moderate reductions in a dictionary's scope make a major difference on compression ratio.

So, this PR changes compression dictionary to be scoped per-SST. It accepts the tradeoff during table building to use more memory and CPU. Important changes include:

- The `BlockBasedTableBuilder` has a new state when dictionary compression is in-use: `kBuffered`. In that state it accumulates uncompressed data in-memory whenever `Add` is called.
- After accumulating target file size bytes or calling `BlockBasedTableBuilder::Finish`, a `BlockBasedTableBuilder` moves to the `kUnbuffered` state. The transition (`EnterUnbuffered()`) involves sampling the buffered data, training a dictionary, and compressing/writing out all buffered data. In the `kUnbuffered` state, a `BlockBasedTableBuilder` behaves the same as before -- blocks are compressed/written out as soon as they fill up.
- Samples are now whole uncompressed data blocks, except the final sample may be a partial data block so we don't breach the user's configured `max_dict_bytes` or `zstd_max_train_bytes`. The dictionary trainer is supposed to work better when we pass it real units of compression. Previously we were passing 64-byte KV samples which was not realistic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4952

Differential Revision: D13967980

Pulled By: ajkr

fbshipit-source-id: 82bea6f7537e1529c7a1a4cdee84585f5949300f
2019-02-11 19:47:32 -08:00
Alexander Zinoviev
32a6dd9a41 Add a new CPU time counter to compaction report (#4889)
Summary:
Measure CPU time consumed for a compaction and report it in the stats report
Enable NowCPUNanos() to work for MacOS
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4889

Differential Revision: D13701276

Pulled By: zinoale

fbshipit-source-id: 5024e5bbccd4dd10fd90d947870237f436445055
2019-01-29 17:24:00 -08:00
Abhishek Madan
81b6b09f6b Remove v1 RangeDelAggregator (#4778)
Summary:
Now that v2 is fully functional, the v1 aggregator is removed.
The v2 aggregator has been renamed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4778

Differential Revision: D13495930

Pulled By: abhimadan

fbshipit-source-id: 9d69500a60a283e79b6c4fa938fc68a8aa4d40d6
2018-12-17 17:33:46 -08:00
Abhishek Madan
abf931afa6 Add compaction logic to RangeDelAggregatorV2 (#4758)
Summary:
RangeDelAggregatorV2 now supports ShouldDelete calls on
snapshot stripes and creation of range tombstone compaction iterators.
RangeDelAggregator is no longer used on any non-test code path, and will
be removed in a future commit.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4758

Differential Revision: D13439254

Pulled By: abhimadan

fbshipit-source-id: fe105bcf8e3d4a2df37a622d5510843cd71b0401
2018-12-17 13:20:51 -08:00
Sagar Vemuri
dc3528077a Update all unique/shared_ptr instances to be qualified with namespace std (#4638)
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638

Differential Revision: D12934992

Pulled By: sagar0

fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
2018-11-09 11:19:58 -08:00
Yanqin Jin
729a617b5b Add listener to sample file io (#3933)
Summary:
We would like to collect file-system-level statistics including file name, offset, length, return code, latency, etc., which requires to add callbacks to intercept file IO function calls when RocksDB is running.
To collect file-system-level statistics, users can inherit the class `EventListener`, as in `TestFileOperationListener `. Note that `TestFileOperationListener::ShouldBeNotifiedOnFileIO()` returns true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3933

Differential Revision: D10219571

Pulled By: riversand963

fbshipit-source-id: 7acc577a2d31097766a27adb6f78eaf8b1e8ff15
2018-10-12 18:36:11 -07:00
Yanqin Jin
bb5dcea98e Add path to WritableFileWriter. (#4039)
Summary:
We want to sample the file I/O issued by RocksDB and report the function calls. This requires us to include the file paths otherwise it's hard to tell what has been going on.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4039

Differential Revision: D8670178

Pulled By: riversand963

fbshipit-source-id: 97ee806d1c583a2983e28e213ee764dc6ac28f7a
2018-08-23 10:12:58 -07:00
Anand Ananthabhotla
4ea56b1bd0 Revert changes in PR #4003 (#4263)
Summary:
Revert this change. Not generating the OnTableFileCreated() notification for a 0 byte SST on flush breaks the assumption that every OnTableFileCreationStarted() notification is followed by a corresponding OnTableFileCreated().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4263

Differential Revision: D9285623

Pulled By: anand1976

fbshipit-source-id: 808c3dcd498b4b4f4ed4be947a29a24b2296aa8d
2018-08-11 16:57:36 -07:00