Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
Summary:
Level-based L0->L0 compaction operates on spans of files that aren't currently being compacted. It reduces the number of L0 files, thus making write stall conditions harder to reach.
- L0->L0 is triggered when base level is unavailable due to pending compactions
- L0->L0 always outputs one file of at most `max_level0_burst_file_size` bytes.
- Subcompactions are disabled for L0->L0 since we want to output one file.
- Input files are chosen as the longest span of available files that will fit within the size limit. This minimizes number of files in L0.
Closes https://github.com/facebook/rocksdb/pull/2027
Differential Revision: D4760318
Pulled By: ajkr
fbshipit-source-id: 9d07183
Summary:
I've needed Env timing measurements a few times now, so finally built something for it.
Closes https://github.com/facebook/rocksdb/pull/2073
Differential Revision: D4811231
Pulled By: ajkr
fbshipit-source-id: 218a249
Summary:
Refactor WriteImpl() so when I plug-in the pipeline write code (which is
an alternative approach for WriteThread), some of the logic can be
reuse. I split out the following methods from WriteImpl():
* PreprocessWrite()
* HandleWALFull() (previous MaybeFlushColumnFamilies())
* HandleWriteBufferFull()
* WriteToWAL()
Also adding a constructor to WriteThread::Writer, and move WriteContext into db_impl.h.
No real logic change in this patch.
Closes https://github.com/facebook/rocksdb/pull/2042
Differential Revision: D4781014
Pulled By: yiwu-arbug
fbshipit-source-id: d45ca18
Summary:
It is confusing to have auto_roll_logger to stay under db/, which has nothing to do with database. Move filename together as it is a dependency.
Closes https://github.com/facebook/rocksdb/pull/2080
Differential Revision: D4821141
Pulled By: siying
fbshipit-source-id: ca7d768
Summary:
some fbcode services override it, we need to keep it virtual.
original change: #1756
Closes https://github.com/facebook/rocksdb/pull/2065
Differential Revision: D4808123
Pulled By: ajkr
fbshipit-source-id: 5eaeea7
Summary:
There still are many warnings (most of them about invalid printf format
for long long), but it builds if FAIL_ON_WARNINGS is disabled.
Closes https://github.com/facebook/rocksdb/pull/2052
Differential Revision: D4807355
Pulled By: siying
fbshipit-source-id: ef03786
Summary:
previously we only cleaned up .tmp files under "shared/" and "private/" directories in case the previous backup failed. we need to do the same for "shared_checksum/"; otherwise, the subsequent backup will fail if it tries to backup at least one of the same files.
Closes https://github.com/facebook/rocksdb/pull/2062
Differential Revision: D4805599
Pulled By: ajkr
fbshipit-source-id: eaa6088
Summary:
Add a parameter to Checkpoint::CreateCheckpoint() so that flush can be skipped if total log file size is within a threshold.
Closes https://github.com/facebook/rocksdb/pull/1993
Differential Revision: D4719842
Pulled By: siying
fbshipit-source-id: 4f9d9e1
Summary:
PinnableSlice
Summary:
Currently the point lookup values are copied to a string provided by the
user. This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.
Here is the summary for improvements:
value 100 byte: 1.8% regular, 1.2% merge values
value 1k byte: 11.5% regular, 7.5% merge values
value 10k byte: 26% regular, 29.9% merge values
The improvement for merge could be more if we extend this approach to
pin the merge output and delay the full merge operation until the user
actually needs it. We have put that for future work.
PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The d
Closes https://github.com/facebook/rocksdb/pull/1756
Differential Revision: D4391738
Pulled By: maysamyabandeh
fbshipit-source-id: 6f3edd3
Summary:
This is the metric I plan to use for adaptive rate limiting. The statistics are updated only if the rate limiter is drained by flush or compaction. I believe (but am not certain) that this is the normal case.
The Statistics object is passed in RateLimiter::Request() to avoid requiring changes to client code, which would've been necessary if we passed it in the RateLimiter constructor.
Closes https://github.com/facebook/rocksdb/pull/1946
Differential Revision: D4646489
Pulled By: ajkr
fbshipit-source-id: d8e0161
Summary:
InsertPathnameToSizeBytes() is called on shared/ and shared_checksum/ directories, which only exist for certain configurations. If we try to list a non-existent directory's contents, some Envs will dump an error message. Let's avoid this by checking whether the directory exists before listing its contents.
Closes https://github.com/facebook/rocksdb/pull/1895
Differential Revision: D4596301
Pulled By: ajkr
fbshipit-source-id: c809679
Summary:
`WriteBatchWithIndex` has an incorrect implicitly-generated move constructor (it will copy the pointer causing a double-free on destruction). Just switch to `unique_ptr` so we get correct move semantics for free.
Closes https://github.com/facebook/rocksdb/pull/1899
Differential Revision: D4598896
Pulled By: ajkr
fbshipit-source-id: 2373d47
Summary:
As the last step in backup creation, the .tmp directory is renamed omitting the .tmp suffix. In case the process terminates before this, the .tmp directory will be left behind. Even if this happens, we want future backups to succeed, so I added some checks/cleanup for this case.
Closes https://github.com/facebook/rocksdb/pull/1896
Differential Revision: D4597323
Pulled By: ajkr
fbshipit-source-id: 48900d8
Summary:
Remove disableDataSync, and another similarly named disable_data_sync options.
This is being done to simplify options, and also because the performance gains of this feature can be achieved by other methods.
Closes https://github.com/facebook/rocksdb/pull/1859
Differential Revision: D4541292
Pulled By: sagar0
fbshipit-source-id: 5b3a6ca
Summary:
introduce new methods into a public threadpool interface,
- allow submission of std::functions as they allow greater flexibility.
- add Joining methods to the implementation to join scheduled and submitted jobs with
an option to cancel jobs that did not start executing.
- Remove ugly `#ifdefs` between pthread and std implementation, make it uniform.
- introduce pimpl for a drop in replacement of the implementation
- Introduce rocksdb::port::Thread typedef which is a replacement for std::thread. On Posix Thread defaults as before std::thread.
- Implement WindowsThread that allocates memory in a more controllable manner than windows std::thread with a replaceable implementation.
- should be no functionality changes.
Closes https://github.com/facebook/rocksdb/pull/1823
Differential Revision: D4492902
Pulled By: siying
fbshipit-source-id: c74cb11
Summary:
merger.h was always a confusing name for me, simply give the file a better name
Closes https://github.com/facebook/rocksdb/pull/1836
Differential Revision: D4505357
Pulled By: IslamAbdelRahman
fbshipit-source-id: 07b28d8
Summary:
The Env registration framework supports registering client Envs and selecting which one to instantiate according to a text field. This enabled things like adding the -env_uri argument to db_bench, so the same binary could be reused with different Envs just by changing CLI config.
Now this problem has come up again in a non-Env context, as I want to instantiate a client Statistics implementation from db_bench, which is configured entirely via text parameters. Also, in the future we may wish to use it for deserializing client objects when loading OPTIONS file.
This diff generalizes the Env registration logic to work with arbitrary types.
- Generalized registration and instantiation code by templating them
- The entire implementation is in a header file as that's Google style guide's recommendation for template definitions
- Pattern match with std::regex_match rather than checking prefix, which was the previous behavior
- Rename functions/files to be non-Env-specific
Closes https://github.com/facebook/rocksdb/pull/1776
Differential Revision: D4421933
Pulled By: ajkr
fbshipit-source-id: 34647d1
Summary:
using ~0UL for mask uses a uint32_t at least in MSVC, but a uint64_t is required for it to work properly
Closes https://github.com/facebook/rocksdb/pull/1777
Differential Revision: D4444004
Pulled By: yiwu-arbug
fbshipit-source-id: 057cc42
Summary:
Consider the following single column family scenario:
prepare in log A
commit in log B
*WAL is too large, flush all CFs to releast log A*
*CFA is on log B so we do not see CFA is depending on log A so no flush is requested*
To fix this we must also consider the log containing the prepare section when determining what log a CF is dependent on.
Closes https://github.com/facebook/rocksdb/pull/1768
Differential Revision: D4403265
Pulled By: reidHoruff
fbshipit-source-id: ce800ff
Summary:
also change variable name `direct_io_` to `use_direct_io_` in WritableFile to make it consistent with read path.
Closes https://github.com/facebook/rocksdb/pull/1770
Differential Revision: D4416435
Pulled By: lightmark
fbshipit-source-id: 4143c53
Summary:
Previously the only way to increment a handle's refcount was to invoke Lookup(), which (1) did hash table lookup to get cache handle, (2) incremented that handle's refcount. For a future DeleteRange optimization, I added a function, Ref(), for when the caller already has a cache handle and only needs to do (2).
Closes https://github.com/facebook/rocksdb/pull/1761
Differential Revision: D4397114
Pulled By: ajkr
fbshipit-source-id: 9addbe5
Summary:
Enable directIO on WritableFileImpl::Append
with offset being current length of the file.
Enable UniqueID tests on Windows, disable others but
leeting them to compile. Unique tests are valuable to
detect failures on different filesystems and upcoming
ReFS.
Clear output in WinEnv Getchildren.This is different from
previous strategy, do not touch output on failure.
Make sure DBTest.OpenWhenOpen works with windows error message
Closes https://github.com/facebook/rocksdb/pull/1746
Differential Revision: D4385681
Pulled By: IslamAbdelRahman
fbshipit-source-id: c07b702
Summary:
In the test the last change to AAAZZZ in handles[1] is deleting it. The
result of the get must be NotFound then. Previosuly the test did not
check for the return value of Get and assumed that the status is ok. It
then move ahead asserting the returned value. The passed-by-reference
string value however was not changed (since the key was not found) and
the asserted value is what it contained before doing the Get.
Closes https://github.com/facebook/rocksdb/pull/1753
Differential Revision: D4390982
Pulled By: maysamyabandeh
fbshipit-source-id: dd55a34
Summary:
Fix some memory leaks in the test. Also rename the test class name from DBTest to CheckpointTest to avoid confusion.
Closes https://github.com/facebook/rocksdb/pull/1752
Differential Revision: D4390355
Pulled By: siying
fbshipit-source-id: 0fa388a
Summary:
Currently the point lookup values are copied to a string provided by the user.
This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.
Here is the summary for improvements:
1. value 100 byte: 1.8% regular, 1.2% merge values
2. value 1k byte: 11.5% regular, 7.5% merge values
3. value 10k byte: 26% regular, 29.9% merge values
The improvement for merge could be more if we extend this approach to
pin the merge output and delay the full merge operation until the user
actually needs it. We have put that for future work.
PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The difference
is a little and could be noise. More importantly it is safely
cancelled
Closes https://github.com/facebook/rocksdb/pull/1732
Differential Revision: D4374613
Pulled By: maysamyabandeh
fbshipit-source-id: a077f1a
Summary:
#1733 started using SizeFileBytes(), so our dummy log file implementation should stop asserting that this function isn't called.
Closes https://github.com/facebook/rocksdb/pull/1740
Differential Revision: D4376055
Pulled By: ajkr
fbshipit-source-id: 2854d89
Summary:
Since the backup work as snapshot, we should only copy
the bytes of the wal while we get the alive files.
Closes https://github.com/facebook/rocksdb/pull/1733
Differential Revision: D4373457
Pulled By: ajkr
fbshipit-source-id: 389318f
Summary:
File copying happens when creating checkpoints and bulkloading files from different FS partition. We should fsync the files when copying them to guarantee durability. A side effect will be that the dirty pages in file system buffers won't grow too large.
Closes https://github.com/facebook/rocksdb/pull/1728
Differential Revision: D4371083
Pulled By: siying
fbshipit-source-id: 579e14c
Summary:
If 2PC is enabled, checkpoint may not copy previous log files that contain uncommitted prepare records. In this diff we keep those files.
Closes https://github.com/facebook/rocksdb/pull/1724
Differential Revision: D4368319
Pulled By: siying
fbshipit-source-id: cc2c746
Summary:
Improve cache options logging to info log.
Also print the value of
cache_index_and_filter_blocks_with_high_priority.
Closes https://github.com/facebook/rocksdb/pull/1709
Differential Revision: D4358776
Pulled By: yiwu-arbug
fbshipit-source-id: 8f030a0
Summary:
In persistent_cache/block_cache_tier.cc, timers are never restarted, so the latency measured is not correct.
Closes https://github.com/facebook/rocksdb/pull/1707
Differential Revision: D4355828
Pulled By: siying
fbshipit-source-id: cd5f9e1
Summary:
Fixes compile error:
In file included from ./util/statistics.h:17:0,
from ./util/stop_watch.h:8,
from ./util/perf_step_timer.h:9,
from ./util/iostats_context_imp.h:8,
from ./util/posix_logger.h:27,
from ./port/util_logger.h:18,
from ./db/auto_roll_logger.h:15,
from db/auto_roll_logger.cc:6:
./util/thread_local.h:65:16: error: 'function' in namespace 'std' does not name a template type
typedef std::function<void(void*, void*)> FoldFunc;
Closes https://github.com/facebook/rocksdb/pull/1656
Differential Revision: D4318702
Pulled By: yiwu-arbug
fbshipit-source-id: 8c5d17a
Summary:
hopefully the last of the gcc-7 compile errors
Closes https://github.com/facebook/rocksdb/pull/1675
Differential Revision: D4332106
Pulled By: IslamAbdelRahman
fbshipit-source-id: 139448c
Summary:
We used to treat any failure to read a backup's meta-file as if the backup were corrupted; however, we should distinguish corruption errors from errors in the backup Env. This fixes an issue where callers would get inconsistent results from GetBackupInfo() if they called it on an engine that encountered Env error during initialization. Now we fail Initialize() in this case so callers cannot invoke GetBackupInfo() on such engines.
Closes https://github.com/facebook/rocksdb/pull/1654
Differential Revision: D4318573
Pulled By: ajkr
fbshipit-source-id: f7a7c54
Summary:
The two tests keep failing in travis. Disable them and will fix later.
Closes https://github.com/facebook/rocksdb/pull/1648
Differential Revision: D4316389
Pulled By: yiwu-arbug
fbshipit-source-id: 0a370e7
Summary:
Some users are assuming NotFound means the backup does not
exist at the provided path, which is a reasonable assumption. We need to
stop returning NotFound for system errors.
Depends on #1644
Closes https://github.com/facebook/rocksdb/pull/1645
Differential Revision: D4312233
Pulled By: ajkr
fbshipit-source-id: 5343c10
Summary:
This is an implementation of non-exclusive locks for pessimistic transactions. It is relatively simple and does not prevent starvation (ie. it's possible that request for exclusive access will never be granted if there are always threads holding shared access). It is done by changing `KeyLockInfo` to hold an set a transaction ids, instead of just one, and adding a flag specifying whether this lock is currently held with exclusive access or not.
Some implementation notes:
- Some lock diagnostic functions had to be updated to return a set of transaction ids for a given lock, eg. `GetWaitingTxn` and `GetLockStatusData`.
- Deadlock detection is a bit more complicated since a transaction can now wait on multiple other transactions. A BFS is done in this case, and deadlock detection depth is now just a limit on the number of transactions we visit.
- Expirable transactions do not work efficiently with shared locks at the moment, but that's okay for now.
Closes https://github.com/facebook/rocksdb/pull/1573
Differential Revision: D4239097
Pulled By: lth
fbshipit-source-id: da7c074
Summary:
Now that we have userspace persisted cache, we don't need flashcache anymore.
Closes https://github.com/facebook/rocksdb/pull/1588
Differential Revision: D4245114
Pulled By: igorcanadi
fbshipit-source-id: e2c1c72
Summary:
disable UBSAN for functions with intentional left shift on -ve number / overflow
These functions are
rocksdb:: Hash
FixedLengthColBufEncoder::Append
FaultInjectionTest:: Key
Closes https://github.com/facebook/rocksdb/pull/1577
Differential Revision: D4240801
Pulled By: IslamAbdelRahman
fbshipit-source-id: 3e1caf6
Summary:
The persistent cache is designed to hop over errors and return key not found. So far, it has shown resilience to write errors, encoding errors, data corruption etc. It is not resilient against disappearing files/directories. This was exposed during testing when multiple instances of persistence cache was started sharing the same directory simulating an unpredictable filesystem environment.
This patch
- makes the write code path more resilient to errors while creating files
- makes the read code path more resilient to handle situation where files are not found
- added a test that does negative write/read testing by removing the directory while writes are in progress
Closes https://github.com/facebook/rocksdb/pull/1472
Differential Revision: D4143413
Pulled By: kradhakrishnan
fbshipit-source-id: fd25e9b
Summary:
Exposing persistent cache stats (counters) to the user via public API.
Closes https://github.com/facebook/rocksdb/pull/1485
Differential Revision: D4155274
Pulled By: siying
fbshipit-source-id: 30a9f50
Summary:
Currently, deadlock cycles are held in std::unordered_map. The problem with it is that it allocates/deallocates memory on every insertion/deletion. This limits throughput since we're doing this expensive operation while holding a global mutex. Fix this by using a vector which caches memory instead.
Running the deadlock stress test, this change increased throughput from 39k txns/s -> 49k txns/s. The effect is more noticeable in MyRocks.
Closes https://github.com/facebook/rocksdb/pull/1545
Differential Revision: D4205662
Pulled By: lth
fbshipit-source-id: ff990e4
Summary:
Dont use c_str() of temp std::string in RocksLuaCompactionFilter::Name()
Closes https://github.com/facebook/rocksdb/pull/1535
Differential Revision: D4199094
Pulled By: IslamAbdelRahman
fbshipit-source-id: e56ce62
Summary:
This diff includes an implementation of CompactionFilter that allows
users to write CompactionFilter in Lua. With this ability, users can
dynamically change compaction filter logic without requiring building
the rocksdb binary and restarting the database.
To compile, WITH_LUA_PATH must be specified to the base directory
of lua.
Closes https://github.com/facebook/rocksdb/pull/1478
Differential Revision: D4150138
Pulled By: yhchiang
fbshipit-source-id: ed84222
Summary:
When option_change_migration_test decides to go with a full compaction, we don't force a compaction but allow trivial move. This can cause assert failure if the destination is level 0. Fix it by forcing the full compaction to skip trivial move if the destination level is L0.
Closes https://github.com/facebook/rocksdb/pull/1518
Differential Revision: D4183610
Pulled By: siying
fbshipit-source-id: dea482b
Summary:
Originally sequence ids were calculated, in recovery, based off of the first seqid found if the first log recovered. The working seqid was then incremented from that value based on every insertion that took place. This was faulty because of the potential for missing log files or inserts that skipped the WAL. The current recovery scheme grabs sequence from current recovering batch and increments using memtableinserter to track how many actual inserts take place. This works for 2PC batches as well scenarios where some logs are missing or inserts that skip the WAL.
Closes https://github.com/facebook/rocksdb/pull/1486
Differential Revision: D4156064
Pulled By: reidHoruff
fbshipit-source-id: a6da8d9
Summary:
copied from: 5ebfd2623a
Opening existing RocksDB attempts recovery from log files, which uses
wrong sequence number to create the memtable. This is a regression
introduced in change a400336.
This change includes a test demonstrating the problem, without the fix
the test fails with "Operation failed. Try again.: Transaction could not
check for conflicts for operation at SequenceNumber 1 as the MemTable
only contains changes newer than SequenceNumber 2. Increasing the value
of the max_write_buffer_number_to_maintain option could reduce the
frequency of this error"
This change is a joint effort by Peter 'Stig' Edwards thatsafunnyname
and me.
Closes https://github.com/facebook/rocksdb/pull/1458
Differential Revision: D4143791
Pulled By: reidHoruff
fbshipit-source-id: 5a25033
Summary:
The general convention in RocksDB is to use GFLAGS instead of google. Fixing the anomaly.
Closes https://github.com/facebook/rocksdb/pull/1470
Differential Revision: D4149213
Pulled By: kradhakrishnan
fbshipit-source-id: 2dafa53
Summary:
Note: reviewed in https://reviews.facebook.net/D65115
- DBIter maintains a range tombstone accumulator. We don't cleanup obsolete tombstones yet, so if the user seeks back and forth, the same tombstones would be added to the accumulator multiple times.
- DBImpl::NewInternalIterator() (used to make DBIter's underlying iterator) adds memtable/L0 range tombstones, L1+ range tombstones are added on-demand during NewSecondaryIterator() (see D62205)
- DBIter uses ShouldDelete() when advancing to check whether keys are covered by range tombstones
Closes https://github.com/facebook/rocksdb/pull/1464
Differential Revision: D4131753
Pulled By: ajkr
fbshipit-source-id: be86559
Summary: OptionChangeMigration() to support FIFO compaction. If the DB before migration is using FIFO compaction, nothing should be done. If the desitnation option is FIFO options, compact to one single L0 file if the source has more than one levels.
Test Plan: Run option_change_migration_test
Reviewers: andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65289
Summary: Make `IsDeadlockDetect()` virtual member of base class `Transaction` for ease of use in MyRocks
Test Plan: compiles. compiles into MyRocks call-site.
Reviewers: mung
Reviewed By: mung
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65385
Summary: Implement deadlock detection. This is done by maintaining a TxnID -> TxnID map which represents the edges in the wait for graph (this is named `wait_txn_map_`).
Test Plan: transaction_test
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D64491
Summary: Auto-compactions will change memory usage of DB but memory_test
didn't take it into account. This PR disable auto compactions in the
test and hopefully it fixes its flakyness.
Test Plan:
UBSAN build used to catch the flakyness. Run `make ubsan_check` and it
passes.
Summary:
reland https://reviews.facebook.net/D62523
- Update SstFileWriter to include a property for a global sequence number in the SST file `rocksdb.external_sst_file.global_seqno`
- Update TableProperties to be aware of the offset of each property in the file
- Update BlockBasedTableReader and Block to be able to honor the sequence number in `rocksdb.external_sst_file.global_seqno` property and use it to overwrite all sequence number in the file
Something worth mentioning is that we don't update the seqno in the index block since and when doing a binary search, the reason for that is that it's guaranteed that SST files with global seqno will have only one user_key and each key will have seqno=0 encoded in it, This mean that this key is greater than any other key with seqno> 0. That mean that we can actually keep the current logic for these blocks
Test Plan: unit tests
Reviewers: sdong, yhchiang
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65211
Summary:
MyRocks hit a regression, @mung generated perf reports showing that the reason is the cost of calling `GetDBOptions()` inside `GetFromBatchAndDB()`
This diff avoid calling `GetDBOptions` and use the `ImmutableDBOptions` instead
Test Plan: make check -j64
Reviewers: sdong, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba, mung
Differential Revision: https://reviews.facebook.net/D65151
Summary: Modifies the lock info export test to test multiple column families after I was experiencing a bug while developing the MyRocks front-end for this.
Test Plan: is test.
Reviewers: mung
Reviewed By: mung
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D64725
Summary:
This exposes a transactions state through a public api rather than through a public member variable. I also do some name refactoring.
ExecutionStatus => TransactionState
exec_status_ => trx_state_
Test Plan: It compiles and transaction_test passes.
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, mung, dhruba, sdong
Differential Revision: https://reviews.facebook.net/D64689
Summary:
When constructing a write batch a client may now call MarkWalTerminationPoint() on that batch. No batch operations after this call will be added written to the WAL but will still be inserted into the Memtable. This facility is used to remove one of the three WriteImpl calls in 2PC transactions. This produces a ~1% perf improvement.
```
RocksDB - unoptimized 2pc, sync_binlog=1, disable_2pc=off
INFO 2016-08-31 14:30:38,814 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2619 seconds. Requests/second = 28628
RocksDB - optimized 2pc , sync_binlog=1, disable_2pc=off
INFO 2016-08-31 16:26:59,442 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2581 seconds. Requests/second = 29054
```
Test Plan: Two unit tests added.
Reviewers: sdong, yiwu, IslamAbdelRahman
Reviewed By: yiwu
Subscribers: hermanlee4, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D64599
Summary:
- Update SstFileWriter to include a property for a global sequence number in the SST file `rocksdb.external_sst_file.global_seqno`
- Update TableProperties to be aware of the offset of each property in the file
- Update BlockBasedTableReader and Block to be able to honor the sequence number in `rocksdb.external_sst_file.global_seqno` property and use it to overwrite all sequence number in the file
Something worth mentioning is that we don't update the seqno in the index block since and when doing a binary search, the reason for that is that it's guaranteed that SST files with global seqno will have only one user_key and each key will have seqno=0 encoded in it, This mean that this key is greater than any other key with seqno> 0. That mean that we can actually keep the current logic for these blocks
Test Plan: unit tests
Reviewers: andrewkr, yhchiang, yiwu, sdong
Reviewed By: sdong
Subscribers: hcz, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D62523
Summary:
Currently there is no mechanism to create persistent cache from
headers. Adding a simple factory method to create a simple persistent cache with
default or NVM optimized settings.
note: Any idea to test this factory is appreciated.
Test Plan: None
Reviewers: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64527
Summary:
This diff does 3 things:
Expose TransactionID so that we can identify transactions when we retrieve locking and lock wait information. This is exposed as `Transaction::GetID`.
Expose lock state information by locking all stripes in all column families and copying their contents to a data structure. This is exposed as `TransactionDB::GetLockStatusData`.
Adds support for tracking the transaction and the key being waited on, and exposes this as `Transaction::GetWaitingTxn`.
Test Plan: unit tests
Reviewers: horuff, sdong
Reviewed By: sdong
Subscribers: vasilep, hermanlee4, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D64413
* enable cmake to work on linux and osx also
* port part of build_detect_platform not covered by thirdparty.inc
to cmake.
- detect fallocate()
- detect malloc_usable_size()
- detect JeMalloc
- detect snappy
* check for asan,tsan,ubsan
* create 'build_version.cc' in build directory.
* add `check` target to support 'make check'.
* add `tools` target to match its counterpart in Makefile.
* use `date` on non-win32 platforms.
* pass different cflags on non-win32 platforms
* detect pthead library using FindThread cmake module.
* enable CMP0042 to silence the cmake warning on osx
* reorder the linked libraries. because testutillib references gtest, to
enable the linker to find the referenced symbols, we need to put gtest
after testutillib.
Signed-off-by: Marcus Watts <mwatts@redhat.com>
Signed-off-by: Kefu Chai <kchai@redhat.com>
* hash_table_bench.cc: fix build without gflags
Signed-off-by: Kefu Chai <kchai@redhat.com>
* remove gtest from librocksdb linkage
testharness.cc is included in librocksdb sources, and it uses gtest. but
gtest is not supposed to be part of the public API of librocksdb. so, in
this change, the testharness.cc is moved out out librocksdb, and is
built as an object target, then linked with the tools and tests instead.
Signed-off-by: Marcus Watts <mwatts@redhat.com>
Signed-off-by: Kefu Chai <kchai@redhat.com>
Summary:
Add new Iterator API, `SeekForPrev`: find the last key that <= target key
support prefix_extractor
support prefix_same_as_start
support upper_bound
not supported in iterators without Prev()
Also add tests in db_iter_test and db_iterator_test
Pass all tests
Cheers!
Test Plan: make all check -j64
Reviewers: andrewkr, yiwu, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64149
Summary:
ZSTD 1.0.0 is coming. We can finally add a support of ZSTD without worrying about compatibility.
Still keep ZSTDNotFinal for compatibility reason.
Test Plan: Run all tests. Run db_bench with ZSTD version with RocksDB built with ZSTD 1.0 and older.
Reviewers: andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: cyan, igor, IslamAbdelRahman, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63141
Summary: There's no reference to ImmutableCFOptions elsewhere in /include/rocksdb. ImmutableCFOptions was introduced in this commit (5665e5e285) but later its reference in /include/rocksdb/table.h is removed.
Test Plan:
make all check
Reviewers: IslamAbdelRahman, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: yhchiang, andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63177
Summary: To reduce number of options, merge source_compaction_factor, max_grandparent_overlap_bytes and expanded_compaction_factor into max_compaction_bytes.
Test Plan: Add two new unit tests. Run all existing tests, including jtest.
Reviewers: yhchiang, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59829
Summary: basically for SimCache stats. I find most times it is hard to pass Statistics* to SimCache constructor.
Test Plan: make all check
Reviewers: andrewkr, sdong, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62193
Summary:
Add mid-point insertion functionality to LRU cache. Caller of `Cache::Insert()` can set an additional parameter to make a cache entry have higher priority. The LRU cache will reserve at most `capacity * high_pri_pool_pct` bytes for high-pri cache entries. If `high_pri_pool_pct` is zero, the cache degenerates to normal LRU cache.
Context: If we are to put index and filter blocks into RocksDB block cache, index/filter block can be swap out too early. We want to add an option to RocksDB to reserve some capacity in block cache just for index/filter blocks, to mitigate the issue.
In later diffs I'll update block based table reader to use the interface to cache index/filter blocks at high priority, and expose the option to `DBOptions` and make it dynamic changeable.
Test Plan: unit test.
Reviewers: IslamAbdelRahman, sdong, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, march, leveldb
Differential Revision: https://reviews.facebook.net/D61977
Summary: 1. Range Deletion Tombstone structure 2. Modify Add() in table_builder to make it usable for adding range del tombstones 3. Expose NewTombstoneIterator() API in table_reader
Test Plan: table_test.cc (now BlockBasedTableBuilder::Add() only accepts InternalKey. I make table_test only pass InternalKey to BlockBasedTableBuidler. Also test writing/reading range deletion tombstones in table_test )
Reviewers: sdong, IslamAbdelRahman, lightmark, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61473
Summary:
Add API to WriteBatch to store range deletions in its buffer
which are later added to memtable. In the WriteBatch buffer, a range
deletion is encoded as "<optype><CF ID (optional)><begin key><end key>".
With this diff, the range tombstones are stored inline with the data in
the memtable. It's useful for now because the test cases rely on the
data being accessible via memtable. My next step is to store range
tombstones in a separate area in the memtable.
Test Plan: unit tests
Reviewers: IslamAbdelRahman, sdong, wanning
Reviewed By: wanning
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61401
Summary: make transactionDB working with StackableDB
Test Plan: make all check -j64
Reviewers: andrewkr, yiwu, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60705
Summary:
Travis times out with persistent_cache_test, there is no way to increase the
timeout, so lower the test case for Travis
Test Plan: Run on travis and sandcastle
Subscribers: leveldb, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D61863
Summary:
add SIM_BLOCK_CACHE_HIT and SIM_BLOCK_CACHE_MISS tickers.
maybe can be combined with Histograms like DB_GET to evaluate the current setting of the size of block cache.
Test Plan: make all check
Reviewers: sdong, andrewkr, IslamAbdelRahman, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61803
Summary:
This is a proof of concept of a RocksDB blob log file. The actual value of the Put() is appended to a blob log using normal data block format, and the handle of the block is written as the value of the key in RocksDB.
The prototype only supports Put() and Get(). It doesn't support DB restart, garbage collection, Write() call, iterator, snapshots, etc.
Test Plan: Add unit tests.
Reviewers: arahut
Reviewed By: arahut
Subscribers: kradhakrishnan, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61485
Summary:
Travis provides a very low capability resource for testing and the
persistent cache tests are too aggressive. It causes the kernel to not have
enough time to do file-system meta data sync operation, causing open file
descriptors to increase and available space to decrease.
This change skips certain tests
Test Plan: Run on travis
Subscribers: leveldb, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D61755
Summary: Implement a time series database that supports DateTieredCompactionStrategy. It wraps a db object and separate SST files in different column families (time windows).
Test Plan: Add `date_tiered_test`.
Reviewers: dhruba, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61653
Summary: Add a utility function that trigger necessary full compaction and put output to the correct level by looking at new options and old options.
Test Plan: Add unit tests for it.
Reviewers: andrewkr, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: muthu, sumeet, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60783
Summary: Fix failed persistent cache test introduced by recent PR to support cross-platform build.
Test Plan: Run persistent_cache_test (on multiple platforms)
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61467
Summary: Fix problem when casting `size_t` to `uint64_t`. Avoid usage of `size_t` when possible.
Test Plan: Pass related test on Travis CI.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61443
Summary: MyRocks is adding support for the user of the SstFileWriter which needs a comparator. It would be more convenient to get the comparator from the column family (which already has to have it) than to have caller keep track of it.
Test Plan: Standard tests (adding one for the new method)
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61155
Summary: Regex support for c++ is very inconsistent across compilers, converting
the logic to simple string manipulation.
Test Plan: Local test
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61377
Summary:
Fixing build break on Mac
(1) uint64_t fix
(2) O_DIRECT works only for Linux
Test Plan: Build and test on Mac and Unix
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61353
Summary:
Experiments on column-aware encodings. Supported features: 1) extract data blocks from SST file and encode with specified encodings; 2) Decode encoded data back into row format; 3) Directly extract data blocks and write in row format (without prefix encoding); 4) Get column distribution statistics for column format; 5) Dump data blocks separated by columns in human-readable format.
There is still on-going work on this diff. More refactoring is necessary.
Test Plan: Wrote tests in `column_aware_encoding_test.cc`. More tests should be added.
Reviewers: sdong
Reviewed By: sdong
Subscribers: arahut, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60027
Summary:
The patch is a continuation of part 5. It glues the abstraction for
file layout and metadata, and flush out the implementation of the API. It
adds unit tests for the implementation.
Test Plan: Run unit tests
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57549
EnvLibrados is a customized RocksDB Env to use RADOS as the backend file system of RocksDB. It overrides all file system related API of default Env. The easiest way to use it is just like following:
std::string db_name = "test_db";
std::string config_path = "path/to/ceph/config";
DB* db;
Options options;
options.env = EnvLibrados(db_name, config_path);
Status s = DB::Open(options, kDBPath, &db);
Then EnvLibrados will forward all file read/write operation to the RADOS cluster assigned by config_path. Default pool is db_name+"_pool".
There are some options that users could set for EnvLibrados.
- write_buffer_size. This variable is the max buffer size for WritableFile. After reaching the buffer_max_size, EnvLibrados will sync buffer content to RADOS, then clear buffer.
- db_pool. Rather than using default pool, users could set their own db pool name
- wal_dir. The dir for WAL files. Because RocksDB only has 2-level structure (dir_name/file_name), the format of wal_dir is "/dir_name"(CAN'T be "/dir1/dir2"). Default wal_dir is "/wal".
- wal_pool. Corresponding pool name for WAL files. Default value is db_name+"_wal_pool"
The example of setting options looks like following:
db_name = "test_db";
db_pool = db_name+"_pool";
wal_dir = "/wal";
wal_pool = db_name+"_wal_pool";
write_buffer_size = 1 << 20;
env_ = new EnvLibrados(db_name, config, db_pool, wal_dir, wal_pool, write_buffer_size);
DB* db;
Options options;
options.env = env_;
// The last level dir name should match the dir name in prefix_pool_map
options.wal_dir = "/tmp/wal";
// open DB
Status s = DB::Open(options, kDBPath, &db);
Librados is required to compile EnvLibrados. Then use "$make LIBRADOS=1" to compile RocksDB. If you want to only compile EnvLibrados test, just run "$ make env_librados_test LIBRADOS=1". To run env_librados_test, you need to have a running RADOS cluster with the configure file located in "../ceph/src/ceph.conf" related to "rocksdb/".
* Replace %zu format specifier with Windows-compatible macro 'ROCKSDB_PRIszt'
* Added "port/port.h" include to sim_cache.cc for call to snprintf().
* Applied cleaner fix to windows build, reverting part of 7bedd94
Summary: In T8216281 we decided to disable prefetching the index and filter during opening table handlers during startup (max_open_files = -1).
Test Plan: Rely on `IndexAndFilterBlocksOfNewTableAddedToCache` to guarantee L0 indexes and filters are still cached and change `PinL0IndexAndFilterBlocksTest` to make sure other levels are not cached (maybe add one more test to test we don't cache other levels?)
Reviewers: sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59913
Summary:
(1) Integer size correction (mac build break)
(2) snprint usage in Windows (windows build break)
Test Plan: Build in windows and mac
Reviewers: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60927
Summary:
Persistent cache tier is the tier abstraction that can work for any block
device based device mounted on a file system. The design/implementation can
handle any generic block device.
Any generic block support is achieved by generalizing the access patten as
{io-size, q-depth, direct-io/buffered}.
We have specifically tested and adapted the IO path for NVM and SSD.
Persistent cache tier consists of there parts :
1) File layout
Provides the implementation for handling IO path for reading and writing data
(key/value pair).
2) Meta-data
Provides the implementation for handling the index for persistent read cache.
3) Implementation
It binds (1) and (2) and flushed out the PersistentCacheTier interface
This patch provides implementation for (1)(2). Follow up patch will provide (3)
and tests.
Test Plan: Compile and run check
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57117
Summary: Refactor cache.cc so that I can plugin clock cache (D55581). Mainly move `ShardedCache` to separate file, move `LRUHandle` back to cache.cc and rename it lru_cache.cc.
Test Plan:
make check -j64
Reviewers: lightmark, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59655
Summary: use of dynamic_cast<TransactionImpl*> is unnecessary and also introduce difficulty for fbrocksdb support of TransactionDB
Test Plan: ./transaction_test
Reviewers: sdong, IslamAbdelRahman, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60501
Summary: LockFile is unnecessary in unit test
Test Plan: env_basic_test.cc
Reviewers: andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60285
Summary:
We have alot of code duplication whenever we call FullMerge we keep duplicating the instrumentation and statistics code
This is a simple diff to refactor the code to use TimedFullMerge instead of FullMerge
Test Plan: COMPILE_WITH_ASAN=1 make check -j64
Reviewers: andrewkr, yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59577
Summary:
The tsan error was because the random implementation we have is not
thread safe, using Random::GetTLSInstance
Test Plan: Run tests in Linux
Reviewers: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59559
Summary: Backup options file to private directory
Test Plan:
backupable_db_test.cc, BackupOptions
Modify DB options by calling OpenDB for 3 times. Check the latest options file is in the right place. Also check no redundent files are backuped.
Reviewers: andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D59373
Summary: Enabled build in Windows and corresponding fixes
Test Plan:
Compile and run persistent_cache_test in Windows and make check in
Linux
Reviewers: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59307
Summary:
PersistentCacheOptions class in persistent_cache_tier.h is not used any where yet in the code base
but it break the unity build because it have the same name as PersistentCacheOptions in table/persistent_cache_helper.h
Remove it temporarily, and the @krad can add it again with a different name when we start using it
Test Plan:
make unity_test -j64
make check -j64
Reviewers: kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59349
Summary: Disable the test under TSAN temporary to temporarily the build
Test Plan: run the test under TSAN
Reviewers: kradhakrishnan, andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59337
Summary:
This provides provides an implementation of PersistentCacheTier that is
specialized for RAM. This tier does not persist data though.
Why do we need this tier ?
This is ideal as tier 0. This tier can host data that is too hot.
Why can't we use Cache variants ?
Yes you can use them instead. This tier can potentially outperform BlockCache
in RAW mode by virtue of compression and compressed cache in block cache doesn't
seem very popular. Potentially this tier can be modified to under stand the
disadvantage of the tier below and retain data that the tier below is bad at
handling (for example index and bloom data that is huge in size)
Test Plan: Run unit tests added
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57069
Summary:
Fix 2 issues that was breaking Windows build
1) double to size_t potential downcast warning
2) port_posix is not ready for windows, avoiding building hash_table_bench to
avoid build break
Test Plan: compile in Windoes and make check
Reviewers: sdong, andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59265
Summary:
This diff provides the basic interface definitions of persistent read
cache system
PersistentCacheOptions captures the persistent read cache options used to
configure and control the system
PersistentCacheTier provides the basic building block for constructing tiered
cache
PersistentTieredCache provides a logical abstraction of tiers of cache layered
over one another
Test Plan: Compile
Reviewers: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57051
Summary:
Rocksdb backup and restore rate limiting is currently done per backup/restore.
So, it is difficult to control rate across multiple backup/restores. With this
change, a throttler can be provided. If a throttler is provided, it is used.
Otherwise, a new throttler is created based on the actual rate limits specified
in the options.
Test Plan: Added unit tests
Reviewers: ldemailly, andrewkr, sdong
Reviewed By: andrewkr
Subscribers: igor, yiwu, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56265
Summary:
This enables configurable Envs without recompiling. For example, my
next diff will make env_test test an Env created by NewEnvFromUri(). Then,
users can determine which Env is tested simply by providing the URI for
NewEnvFromUri() (e.g., through a CLI argument or environment variable).
The registration process allows us to register any Env that is linked with the
RocksDB library, so we can register our internal Envs as well.
The registration code is inspired by our internal InitRegistry.
Test Plan: new unit test
Reviewers: IslamAbdelRahman, lightmark, ldemailly, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D58449
Summary: Add hash table (under persistent cache) to CMake list
Test Plan: Run hash_test in windows and make check in Linux
Reviewers: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59151
Summary:
Persistent read cache isn't very applicable for lite builds. Wrapping
the code with #ifndef ROCKSDB_LITE .. #endif
Test Plan: Run unit, lite, lite_test
Reviewers: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D58563
Summary:
Google C++ Style writes: In particular, prefer to write lambda captures explicitly when capturing this or if the lambda will escape the current scope.
Here it is the case for both.
Test Plan: Run all test suites.
Reviewers: andrewkr, dhruba
Reviewed By: andrewkr, dhruba
Subscribers: yhchiang, IslamAbdelRahman, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58515
Summary:
Introduce MaxOperator a simple merge operator that return the max of all operands.
This merge operand help me in benchmarking
Test Plan: Add new unitttests
Reviewers: sdong, andrewkr, yhchiang
Reviewed By: yhchiang
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57873
Summary: This tests that a prepared transaction is not lost after several crashes, restarts, and memtable flushes.
Test Plan: TwoPhaseLongPrepareTest
Reviewers: sdong
Subscribers: hermanlee4, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58185
Summary:
TransactionTest.TwoPhaseMultiThreadTest runs forever under TSAN and our CI builds time out
looks like the reason is that some threads keep running and other threads dont get a chance to increment the counter
Test Plan: run the test under TSAN
Reviewers: sdong, horuff
Reviewed By: horuff
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58359
Summary:
We expect the persistent read cache to perform at speeds upto 8 GB/s. In order
to accomplish that, we need build a index mechanism which operate in the order
of multiple millions per sec rate.
This patch provide the basic data structure to accomplish that:
(1) Hash table implementation with lock contention spread
It is based on the StripedHashSet<T> implementation in
The Art of multiprocessor programming by Maurice Henry & Nir Shavit
(2) LRU implementation
Place holder algorithm for further optimizing
(3) Evictable Hash Table implementation
Building block for building index data structure that evicts data like files
etc
TODO:
(1) Figure if the sharded hash table and LRU can be used instead
(2) Figure if we need to support configurable eviction algorithm for
EvictableHashTable
Test Plan: Run unit tests
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55785
Summary:
- Make sure we clean up recovered_transactions_ on DBImpl destructor
- delete leaked txns and env in TransactionTest
Test Plan: Run transaction_test under valgrind
Reviewers: sdong, andrewkr, yhchiang, horuff
Reviewed By: horuff
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58263
Summary: Disable backupable_db_test.cc on Windows since EnvChroot is not supported
Test Plan: check ROCKSDB_LITE
Reviewers: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58035
Summary:
- Used ChrootEnv so the database and backup Envs are isolated in the filesystem.
- Removed DifferentEnvs test since now every test uses different Envs
Depends on D57543
Test Plan:
- ran backupable_db_test
- verified backupable_db_test now catches the bug when D57159 is backed out (this bug previously passed through the test cases, which motivated this change)
Reviewers: sdong, lightmark, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57615
Summary:
1. prepare()
2. crash
3. recover
4. commit()
5. crash
6. data is lost
This is due to the transaction data still only residing in the WAL but because the logs were flushed on the first recovery the data is ignored on the second recovery. We must scan all logs found on recovery and only ignore redundant data at the time of replay. It is not possible to know which logs still contain relevant data at time of recovery. We cannot simply ignore a log because all of the non-2pc data it contains has already been written to L0.
The changes made to MemTableInserter are to ensure that prepared sections are still recovered even if all of the non-2pc data in that log has already been flushed to L0.
Test Plan: Provided test.
Reviewers: sdong
Subscribers: andrewkr, hermanlee4, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57729
Summary:
Consider the following WAL with 4 batch entries prefixed with their sequence at time of memtable insert.
[1: BEGIN_PREPARE, PUT, PUT, PUT, PUT, END_PREPARE(a)]
[1: BEGIN_PREPARE, PUT, PUT, PUT, PUT, END_PREPARE(b)]
[4: COMMIT(a)]
[7: COMMIT(b)]
The first two batches do not consume any sequence numbers so are both prefixed with seq=1.
For 2pc commit, memtable insertion takes place before COMMIT batch is written to WAL.
We can see that sequence number consumption takes place between WAL entries giving us the seemingly sparse sequence prefix for WAL entries.
This is a valid WAL.
Because with 2PC markers one WriteBatch points to another batch containing its inserts a writebatch can consume more or less sequence numbers than the number of sequence consuming entries that it contains.
We can see that, given the entries in the WAL, 6 sequence ids were consumed. Yet on recovery the maximum sequence consumed would be 7 + 3 (the number of sequence numbers consumed by COMMIT(b))
So, now upon recovery we must track the actual consumption of sequence numbers.
In the provided scenario there will be no sequence gaps, but it is possible to produce a sequence gap. This should not be a problem though. correct?
Test Plan: provided test.
Reviewers: sdong
Subscribers: andrewkr, leveldb, dhruba, hermanlee4
Differential Revision: https://reviews.facebook.net/D57645
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: andrewkr, vasilep, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54093
Summary: Fix BackupableDBTest.NoDoubleCopy and BackupableDBTest.DifferentEnvs by mocking the db files in db_env instead of backup_env_
Test Plan: make check -j64
Reviewers: sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57273
Summary:
When db_env_ != backup_env_, InsertPathnameToSizeBytes() would
use the wrong Env during backup creation. This happened because this function
used backup_env_ instead of db_env_ to get WAL/data file sizes.
This diff adds an argument to InsertPathnameToSizeBytes() indicating which Env
to use.
Test Plan: ran @anirbanb's BackupTestTool
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57159
* Musl libc does not provide adaptive mutex. Added feature test for PTHREAD_MUTEX_ADAPTIVE_NP.
* Musl libc does not provide backtrace(3). Added a feature check for backtrace(3).
* Fixed compiler error.
* Musl libc does not implement backtrace(3). Added platform check for libexecinfo.
* Alpine does not appear to support gcc -pg option. By default (gcc has PIE option enabled) it fails with:
gcc: error: -pie and -pg|p|profile are incompatible when linking
When -fno-PIE and -nopie are used it fails with:
/usr/lib/gcc/x86_64-alpine-linux-musl/5.3.0/../../../../x86_64-alpine-linux-musl/bin/ld: cannot find gcrt1.o: No such file or directory
Added gcc -pg platform test and output PROFILING_FLAGS accordingly. Replaced pg var in Makefile with PROFILING_FLAGS.
* fix segfault when TEST_IOCTL_FRIENDLY_TMPDIR is undefined and default candidates are not suitable
* use ASSERT_DOUBLE_EQ instead of ASSERT_EQ
* When compiled with ROCKSDB_MALLOC_USABLE_SIZE UniversalCompactionFourPaths and UniversalCompactionSecondPathRatio tests fail due to premature memtable flushes on systems with 16-byte alignment. Arena runs out of block space before GenerateNewFile() completes.
Increased options.write_buffer_size.
Summary:
This interface is redundant and has been deprecated for a while.
It's also unused internally. Let's delete it.
I moved the comments to the corresponding functions in BackupEngine/
BackupEngineReadOnly. This caused the diff tool to not work cleanly.
Test Plan:
unit tests
$ ./backupable_db_test
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56331
Summary:
Several of backupable_db_test fails if running standalone, because of directory missing. Fix it by:
(1) garbage collector skips shared directory if it doesn't exit
(2) BackupableDBTest.Issue921Test to create the parent directory of the backup directory fist.
Test Plan: Run the tests individually and make sure they pass
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56829
Summary:
- Need to use unsigned long long for 64-bit literals on windows
- Need size_t for backup meta-file length since clang doesn't let us assign size_t to int
Test Plan: backupable_db_test and options_test
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56391
Summary:
My last diff introduced a warning when compiling under release mode
https://reviews.facebook.net/D55539
fix the warning
Test Plan:
DEBUG_LEVEL=0 make db_bench
make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56295
Summary:
- Put key offset and key size in WriteBatchIndexEntry
- Use vector for comparators in WriteBatchEntryComparator
I use a slightly modified version of @yoshinorim code to benchmark
https://gist.github.com/IslamAbdelRahman/b120f4fba8d6ff7d58d2
For Put I create a transaction that put a 1000000 keys and measure the time spent without commit.
For GetForUpdate I read the keys that I added in the Put transaction.
Original time:
```
rm -rf /dev/shm/rocksdb-example/
./txn_bench put 1000000
1000000 OK Ops | took 3.679 seconds
./txn_bench get_for_update 1000000
1000000 OK Ops | took 3.940 seconds
```
New Time
```
rm -rf /dev/shm/rocksdb-example/
./txn_bench put 1000000
1000000 OK Ops | took 2.727 seconds
./txn_bench get_for_update 1000000
1000000 OK Ops | took 3.880 seconds
```
It looks like there is no significant improvement in GetForUpdate() but we can see ~30% improvement in Put()
Test Plan: unittests
Reviewers: yhchiang, anthony, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D55539
Summary:
Rocksdb backup engine maintains metadata about backups in separate files. But,
there was no way to add extra application specific data to it. Adding support
for that.
In some use cases, applications decide to restore a backup based on some
metadata. This will help those cases to cheaply decide whether to restore or
not.
Test Plan:
Added a unit test. Existing ones are passing
Sample meta file for BinaryMetadata test-
```
1459454043
0
metadata 6162630A64656600676869
2
private/1/MANIFEST-000001 crc32 1184723444
private/1/CURRENT crc32 3505765120
```
Reviewers: sdong, ldemailly, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, ldemailly
Differential Revision: https://reviews.facebook.net/D56007
Summary:
This fixes a similar issue as D54711: "CURRENT" file can mutate between
GetLiveFiles() and copy to the tmp directory, in which case it would reference
the wrong manifest filename. To fix this, I forge the "CURRENT" file such that
it simply contains the filename for the manifest returned by GetLiveFiles().
- Changed CreateCheckpoint() to forge current file
- Added CreateFile() utility function
- Added test case that rolls manifest during checkpoint creation
Test Plan:
$ ./checkpoint_test
Reviewers: sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55065
Summary: Refactored db_bench transaction stress tests so that they can be called from unit tests as well.
Test Plan: run new unit test as well as db_bench
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55203
Summary:
- Keep track of obsolete manifests in VersionSet
- Updated FindObsoleteFiles() to put obsolete manifests in the JobContext for later use by PurgeObsoleteFiles()
- Added test case that verifies a stale manifest is deleted by a non-full purge
Test Plan:
$ ./backupable_db_test --gtest_filter=BackupableDBTest.ChangeManifestDuringBackupCreation
Reviewers: IslamAbdelRahman, yoshinorim, sdong
Reviewed By: sdong
Subscribers: andrewkr, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D55269
Summary: Previously, reusing a transaction (by passing it as an argument to BeginTransaction) would not clear the transaction's snapshot. This is not a clear, well-definited behavior.
Test Plan: improved test
Reviewers: sdong, IslamAbdelRahman, horuff, jkedgar
Reviewed By: jkedgar
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55053
Summary:
Now that we get sizes efficiently, we no longer need the workaround to
embed file size in filename.
Test Plan:
$ ./backupable_db_test
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55035
Summary:
For VerifyBackup(), backup files can be spread across "shared/",
"shared_checksum/", and "private/" subdirectories, so we have to
bulk get all three.
For CreateNewBackup(), we make two separate bulk calls: one for the
data files and one for WAL files.
There is also a new helper function, ExtendPathnameToSizeBytes(),
that translates the file attributes vector to a map. I decided to leave
GetChildrenFileAttributes()'s (from D53781) return type as vector to
keep it consistent with GetChildren().
Depends on D53781.
Test Plan:
verified relevant unit tests
$ ./backupable_db_test
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53919
Summary: Add function to reinitialize a transaction object so that it can be reused. This is an optimization so users can potentially avoid reallocating transaction objects.
Test Plan: added tests
Reviewers: yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: jkedgar, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53835
Summary:
Fixed two related race conditions in backup creation.
(1) CreateNewBackup() uses DB::DisableFileDeletions() to prevent table files
from being deleted while it is copying; however, the MANIFEST file could still
rotate during this time. The fix is to stop deleting the old manifest in the
rotation logic. It will be deleted safely later when PurgeObsoleteFiles() runs
(can only happen when file deletions are enabled).
(2) CreateNewBackup() did not account for the CURRENT file being mutable.
This is significant because the files returned by GetLiveFiles() contain a
particular manifest filename, but the manifest to which CURRENT refers can
change at any time. This causes problems when CURRENT changes between the call
to GetLiveFiles() and when it's copied to the backup directory. To workaround this, I
manually forge a CURRENT file referring to the manifest filename returned in
GetLiveFiles().
(2) also applies to the checkpointing code, so let me know if this approach is
good and I'll make the same change there.
Test Plan:
new test for roll manifest during backup creation.
running the test before this change:
$ ./backupable_db_test --gtest_filter=BackupableDBTest.ChangeManifestDuringBackupCreation
...
IO error: /tmp/rocksdbtest-9383/backupable_db/MANIFEST-000001: No such file or directory
running the test after this change:
$ ./backupable_db_test --gtest_filter=BackupableDBTest.ChangeManifestDuringBackupCreation
...
[ RUN ] BackupableDBTest.ChangeManifestDuringBackupCreation
[ OK ] BackupableDBTest.ChangeManifestDuringBackupCreation (2836 ms)
Reviewers: IslamAbdelRahman, anthony, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54711
Summary:
As titled. This fixes the tsan error caused by logger_ being used in
backup_engine_'s destructor. It does not fix the transient unit test failure,
which is caused by MANIFEST file changing while backup is happening.
Test Plan:
verified the tsan error no longer happens on either success or
failure.
$ COMPILE_WITH_TSAN=1 make -j32 backupable_db_test
$ while ./backupable_db_test --gtest_filter=BackupableDBTest.CorruptionsTest ; do : ; done
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54669
Summary:
Relax the check condition of prefix_extractor in CheckOptionsCompatibility
by allowing changing value from non-nullptr to nullptr or nullptr to
non-nullptr.
Test Plan:
options_test
options_util_test
Reviewers: sdong, anthony, IslamAbdelRahman, kradhakrishnan, gunnarku
Reviewed By: gunnarku
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54477
Summary: Broke transaction locking in 4.4 in D52197. Will cherry-pick this change into 4.4 (which hasn't yet been fully released). Repro'd using db_bench.
Test Plan: unit tests and db_Bench
Reviewers: sdong, yhchiang, kradhakrishnan, ngbronson
Reviewed By: ngbronson
Subscribers: ngbronson, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54021
Summary: There is an issue in DBImpl::WriteImpl where if an empty writebatch comes in and sync=true then the logs will be marked as being synced yet the sync never actually happens because there is no data in the writebatch. This causes the next incoming batch to hang while waiting for the logs to complete syncing. This fix syncs logs even if the writebatch is empty.
Test Plan: DoubleEmptyBatch unit test in transaction_test.
Reviewers: yoshinorim, hermanlee4, sdong, ngbronson, anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54057
Summary:
One test in transaction_test.cc forgets to call SyncPoint::DisableProcessing().
As a result, a program might to access the SyncPoint singleton after it
already goes out of scope.
This patch fix this error by calling SyncPoint::DisableProcessing().
Test Plan: transaction_test
Reviewers: sdong, IslamAbdelRahman, kradhakrishnan, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54033
Summary:
memory_test.cc has some tests that are not unstable but
hard to reproduce, and the cause is the test itself not
the code. Temporarily disable the tests until
we have a good fix.
Test Plan: memory_test
Reviewers: sdong, anthony, IslamAbdelRahman, rven, kradhakrishnan
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54009
Summary: MyRocks wants to be able to un-lock a key that was just locked by GetForUpdate(). To do this safely, I am now keeping track of the number of reads(for update) and writes for each key in a transaction. UndoGetForUpdate() will only unlock a key if it hasn't been written and the read count reaches 0.
Test Plan: more unit tests
Reviewers: igor, rven, yhchiang, spetrunia, sdong
Reviewed By: spetrunia, sdong
Subscribers: spetrunia, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47043
Summary:
copy from task 8196669:
1) Optimistic transactions do not support batching writes from different threads.
2) Pessimistic transactions do not support batching writes if an expiration time is set.
In these 2 cases, we currently do not do any write batching in DBImpl::WriteImpl() because there is a WriteCallback that could decide at the last minute to abort the write. But we could support batching write operations with callbacks if we make sure to process the callbacks correctly.
To do this, we would first need to modify write_thread.cc to stop preventing writes with callbacks from being batched together. Then we would need to change DBImpl::WriteImpl() to call all WriteCallback's in a batch, only write the batches that succeed, and correctly set the state of each batch's WriteThread::Writer.
Test Plan: Added test WriteWithCallbackTest to write_callback_test.cc which creates multiple client threads and verifies that writes are batched and executed properly.
Reviewers: hermanlee4, anthony, ngbronson
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52863
Summary:
Doing inline checking of transaction expiration instead of
using a callback.
Test Plan: To be added
Reviewers: anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53673
Makefile adjust paths for solaris build
Makefile enable _GLIBCXX_USE_C99 so that std::to_string is available
db_compaction_test.cc Initialise a variable to avoid a compilation error
db_impl.cc Include <alloca.h>
db_test.cc Include <alloca.h>
Environment.java recognise solaris envrionment
options_bulder.cc Make log unambiguous
geodb_impl.cc Make log and floor unambiguous
Summary: fix memory leak in test code
Test Plan: ran test
Reviewers: rven, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52617
Summary:
See a bug report here: https://github.com/facebook/rocksdb/issues/921
The fix is to not check the shared/ directory if share_table_files is false. We could also check FileExists() before GetChildren(), but that will add extra latency when Env is Hdfs :(
Test Plan: added a unit test
Reviewers: rven, sdong, IslamAbdelRahman, yhchiang, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52593
Summary: Warning in release build.
Test Plan: Make release and make all
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52305
Summary: Stopped using std::timed_mutex as it has known issues in older versiong of gcc. Ran into these problems when testing MongoRocks.
Test Plan: unit tests. Manual mongo testing on gcc 4.8.
Reviewers: igor, yhchiang, rven, IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52197
Summary:
This diff provides a framework for doing manual
compactions in parallel with other compactions. We now have a deque of manual compactions. We also pass manual compactions as an argument from RunManualCompactions down to
BackgroundCompactions, so that RunManualCompactions can be reentrant.
Parallelism is controlled by the two routines
ConflictingManualCompaction to allow/disallow new parallel/manual
compactions based on already existing ManualCompactions. In this diff, by default manual compactions still have to run exclusive of other compactions. However, by setting the compaction option, exclusive_manual_compaction to false, it is possible to run other compactions in parallel with a manual compaction. However, we are still restricted to one manual compaction per column family at a time. All of these restrictions will be relaxed in future diffs.
I will be adding more tests later.
Test Plan: Rocksdb regression + new tests + valgrind
Reviewers: igor, anthony, IslamAbdelRahman, kradhakrishnan, yhchiang, sdong
Reviewed By: sdong
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47973
Summary: Add support to change write options after creating a transaction. This is needed for MongoRocks.
Test Plan: added test
Reviewers: sdong, rven, kradhakrishnan, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51867
Summary:
Currently, transactions can fail even if there is no actual write conflict. This is due to relying on only the memtables to check for write-conflicts. Users have to tune memtable settings to try to avoid this, but it's hard to figure out exactly how to tune these settings.
With this diff, TransactionDB will use both memtables and SST files to determine if there are any write conflicts. This relies on the fact that BlockBasedTable stores sequence numbers for all writes that happen after any open snapshot. Also, D50295 is needed to prevent SingleDelete from disappearing writes (the TODOs in this test code will be fixed once the other diff is approved and merged).
Note that Optimistic transactions will still rely on tuning memtable settings as we do not want to read from SST while on the write thread. Also, memtable settings can still be used to reduce how often TransactionDB needs to read SST files.
Test Plan: unit tests, db bench
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb, yoshinorim
Differential Revision: https://reviews.facebook.net/D50475
This is an Env implementation that mirrors all storage-related methods on
two different backend Env's and verifies that they return the same
results (return status and read results). This is useful for implementing
a new Env and verifying its correctness.
Signed-off-by: Sage Weil <sage@redhat.com>
Summary:
D51183 was reverted due to breaking the LITE build.
This diff is the same as D51183 but with a fix for the LITE BUILD(D51693)
Test Plan: run all unit tests
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51711
Summary:
D50475 enables using SST files for transaction write-conflict checking. In order for this to work, we need to make sure not to compact out SingleDeletes when there is an earlier transaction snapshot(D50295). If there is a long-held snapshot, this could reduce the benefit of the SingleDelete optimization.
This diff allows Transactions to mark snapshots as being used for write-conflict checking. Then, during compaction, we will be able to optimize SingleDeletes better in the future.
This diff adds a flag to SnapshotImpl which is used by Transactions. This diff also passes the earliest write-conflict snapshot's sequence number to CompactionIterator. This diff does not actually change Compaction (after this diff is pushed, D50295 will be able to use this information).
Test Plan: no behavior change, ran existing tests
Reviewers: rven, kradhakrishnan, yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51183
Summary: When SetSnapshot() is used the caller immediately knows a snapshot has been created, but when SetSnapshotOnNextOperation() is used the caller needs a way to get notified when that snapshot has been generated. This creates an interface that the client can implement that will be called at the time the snapshot is created.
Test Plan: Added a new SetSnapshotOnNextOperationWithNotification test into the transaction_test.
Reviewers: sdong, anthony
Reviewed By: anthony
Subscribers: yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51177
Summary:
Fixes T8781168.
Added a new function EnableAutoCompactions in db.h to be publicly
avialable. This allows compaction to be re-enabled after disabling it via
SetOptions
Refactored code to set the dbptr earlier on in TransactionDB::Open and DB::Open
Temporarily disable auto_compaction in TransactionDB::Open until dbptr is set to
prevent race condition.
Test Plan:
Ran make all check
verified fix on myrocks side:
was able to reproduce the seg fault with
../tools/mysqltest.sh --mem --force rocksdb.drop_table
method was to manually sleep the thread after DB::Open but before TransactionDB ptr was
assigned in transaction_db_impl.cc:
DB::Open(db_options, dbname, column_families_copy, handles, &db);
clock_t goal = (60000 * 10) + clock();
while (goal > clock());
...dbptr(aka rdb) gets assigned below
verified my changes fixed the issue.
Also added unit test 'ToggleAutoCompaction' in transaction_test.cc
Reviewers: hermanlee4, anthony
Reviewed By: anthony
Subscribers: alex, dhruba
Differential Revision: https://reviews.facebook.net/D51147
Summary: Getting file size from all the backup files can take a long time. In some cases, the sizes are available in file names. We allow a mode to get those sizes from file name.
Test Plan:
Make some unit tests in backupable_db_test to run in such a mode.
Make sure RocksDB Lite builds too.
Reviewers: IslamAbdelRahman, rven, yhchiang, kradhakrishnan, anthony, igor
Reviewed By: igor
Subscribers: muthu, asameet, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51243
* conversion from 'size_t' to 'type', by add static_cast
Tested:
* by build solution on Windows, Linux locally,
* run tests
* build CI system successful
Summary:
The commit of option helper refactor broken the build:
(1) a git merge problem
(2) some uncaught compiler warning
Fix it.
Test Plan: Make sure "make all" passes
Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D50943
Summary:
Add CheckOptionsCompatibility() API to options_util that returns
Status::OK if the input DBOptions and ColumnFamilyDescriptors
are compatible with the latest options stored in the specified DB path.
Test Plan: Added tests in options_util_test
Reviewers: igor, anthony, IslamAbdelRahman, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D50649
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
Summary:
This patch allows rocksdb to persist options into a file on
DB::Open, SetOptions, and Create / Drop ColumnFamily.
Options files are created under the same directory as the rocksdb
instance.
In addition, this patch also adds a fail_if_missing_options_file in DBOptions
that makes any function call return non-ok status when it is not able to
persist options properly.
// If true, then DB::Open / CreateColumnFamily / DropColumnFamily
// / SetOptions will fail if options file is not detected or properly
// persisted.
//
// DEFAULT: false
bool fail_if_missing_options_file;
Options file names are formatted as OPTIONS-<number>, and RocksDB
will always keep the latest two options files.
Test Plan:
Add options_file_test.
options_test
column_family_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48285
Summary:
Valgrind reports an issue with the test for GeoIterator.
This diff explicitly deletes the two iterators used in this test.
Test Plan: This diff is for a test. The test still passes.
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D50193
Summary:
Fixed the following compile error in RocksDBLite:
18:00:33 CC utilities/memory/memory_test.o
18:00:33 utilities/memory/memory_test.cc: In function ‘int main(int, char**)’:
18:00:33 utilities/memory/memory_test.cc:268:66: error: ‘printf’ was not declared in this scope
18:00:33 printf("Skipped in RocksDBLite as utilities are not supported.");
18:00:33 ^
Test Plan: make OPT=-DROCKSDB_LITE memory_test
Reviewers: igor, sdong, anthony, IslamAbdelRahman
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D50145
Summary:
This patch introduces utilities/memory, which currently includes
GetApproximateMemoryUsageByType that reports different types of
rocksdb memory usage given a list of input DBs.
The API also take care of the case where Cache could be shared
across multiple column families / multiple db instances.
Currently, it reports memory usage of memtable, table-readers
and cache.
Test Plan: utilities/memory/memory_test.cc
Reviewers: igor, anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49257
Summary:
This diff is a first step towards an iterator based interface for the
SearchRadial method which replaces a vector of GeoObjects with an
iterator for GeoObjects. This diff works by just wrapping the iterator
for the encapsulated vector of GeoObjects. A future diff could extend
this approach by defining an interator in terms of the underlying
iteration in SearchRadial which would then remove the need to have
an in-memory representation for all the matching GeoObjects.
Fixes T8421387
Test Plan:
The existing tests have been modified to work with the new
interface.
Reviewers: IslamAbdelRahman, kradhakrishnan, dhruba, igor
Reviewed By: igor
Subscribers: igor, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D50031
Summary:
CreateLoggerFromOptions have some parameters like db_log_dir and env, these parameters are redundant since they already exist in DBOptions
this patch remove the redundant parameters and expose CreateLoggerFromOptions to users
Test Plan: make check
Reviewers: igor, anthony, yhchiang, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, hermanlee4
Differential Revision: https://reviews.facebook.net/D49713
Summary:
MyRocks needs the ability to clear a snapshot for Read Committed support
Test Plan: transaction_test
Reviewers: anthony
Reviewed By: anthony
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48861
Summary: Support for Transaction::CreateSnapshotOnNextOperation(). This is to fix a write-conflict race-condition that Yoshinori was running into when testing MyRocks with LinkBench.
Test Plan: New tests
Reviewers: yhchiang, spetrunia, rven, igor, yoshinorim, sdong
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48099
Summary:
MyRocks reported some perfomance issues when inserting many keys into a transaction due to the cost of inserting new keys into WriteBatchWithIndex. Frequently, they don't even need the keys to be indexed as they don't need to read them back. DisableIndexing() can be used to avoid the cost of indexing.
I also plan on eventually investigating if we can improve WriteBatchWithIndex performance. But even if we improved the perf here, it is still beneficial to be able to disable the indexing all together for large transactions.
Test Plan: unit test
Reviewers: igor, rven, yoshinorim, spetrunia, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48471
Summary: Pass column family ID through TablePropertiesCollectorFactory::CreateTablePropertiesCollector() so that users can identify which column family this file is for and handle it differently.
Test Plan: Add unit test scenarios in tests related to table properties collectors to verify the information passed in is correct.
Reviewers: rven, yhchiang, anthony, kradhakrishnan, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48411
Summary:
WriteBatchWithIndex::GetFromBatchAndDB only works correctly for overwrite_key=false. Transactions use overwrite_key=true (since WriteBatchWithIndex::GetIteratorWithBase only works when overwrite_key=true). So currently, Transactions could return incorrectly merged results when calling Get/GetForUpdate().
Until a permanent fix can be put in place, Transaction::Get[ForUpdate] and WriteBatchWithIndex::GetFromBatch[AndDB] will now return MergeInProgress if the most recent write to a key in the batch is a Merge.
Test Plan: more tests
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47817
Summary: Should have used auto& instead of auto. Also needed to change the code a bit due to const correctness.
Test Plan: unit tests
Reviewers: sdong, igor, yoshinorim, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47787
Summary: Transactional SingleDelete is needed for MyRocks. Note: This diff requires D47529.
Test Plan: Added some new tests in this diff as well as more tests added in D47529
Reviewers: rven, sdong, igor, yhchiang
Reviewed By: yhchiang
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47535
Summary: Fixed some bugs in using SingleDelete on a WriteBatchWithIndex and added some tests.
Test Plan: new tests
Reviewers: sdong, yhchiang, rven, kradhakrishnan, IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47529
Summary: FailOverwritingBackups has unexpected results when auto-compaction runs.
Test Plan: ran test a bunch of times
Reviewers: IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47181
Summary:
This patch fixes#7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
Summary:
In case of huge db backup infromation about progress of downloading would help.
New callback parameter in CreateNewBackup() function will trigger whenever a some amount of data downloaded.
Task: 8057631
Test Plan:
ProgressCallbackDuringBackup test that cover new functionality added to BackupableDBTest tests.
other test succeed as well.
Reviewers: Guenena, benj, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46575
Summary: Transaction::RollbackToSavePoint() will now release any locks that were taken since the previous SavePoint. To do this cleanly, I moved tracked_keys_ management into TransactionBase.
Test Plan: New Transaction test.
Reviewers: igor, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, spetrunia, leveldb
Differential Revision: https://reviews.facebook.net/D46761
