Summary:
Consider the following single column family scenario:
prepare in log A
commit in log B
*WAL is too large, flush all CFs to releast log A*
*CFA is on log B so we do not see CFA is depending on log A so no flush is requested*
To fix this we must also consider the log containing the prepare section when determining what log a CF is dependent on.
Closes https://github.com/facebook/rocksdb/pull/1768
Differential Revision: D4403265
Pulled By: reidHoruff
fbshipit-source-id: ce800ff
Summary:
Current write stalling system has the problem of lacking of positive feedback if the restricted rate is already too low. Users sometimes stack in very low slowdown value. With the diff, we add a positive feedback (increasing the slowdown value) if we recover from slowdown state back to normal. To avoid the positive feedback to keep the slowdown value to be to high, we add issue a negative feedback every time we are close to the stop condition. Experiments show it is easier to reach a relative balance than before.
Also increase level0_stop_writes_trigger default from 24 to 32. Since level0_slowdown_writes_trigger default is 20, stop trigger 24 only gives four files as the buffer time to slowdown writes. In order to avoid stop in four files while 20 files have been accumulated, the slowdown value must be very low, which is amost the same as stop. It also doesn't give enough time for the slowdown value to converge. Increase it to 32 will smooth out the system.
Closes https://github.com/facebook/rocksdb/pull/1562
Differential Revision: D4218519
Pulled By: siying
fbshipit-source-id: 95e4088
Summary:
Return an error from DeleteRange() (or Write() if the user is using the
low-level WriteBatch API) if an unsupported table type is configured.
Closes https://github.com/facebook/rocksdb/pull/1519
Differential Revision: D4185933
Pulled By: ajkr
fbshipit-source-id: abcdf84
Summary:
change ioptions.comparator to user_comparator instread of internal_comparator.
Also change Comparator* to InternalKeyComparator* to make its type explicitly.
Test Plan: make all check -j64
Reviewers: andrewkr, sdong, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D65121
Summary:
Issue scenario:
(1) We have 3 files in L1 and we issue a compaction that will compact them into 1 file in L2
(2) While compaction (1) is running, we flush a file into L0 and trigger another compaction that decide to move this file to L1 and then move it again to L2 (this file don't overlap with any other files)
(3) compaction (1) finishes and install the file it generated in L2, but this file overlap with the file we generated in (2) so we break the LSM consistency
Looks like this issue can be triggered by using non-exclusive manual compaction or AddFile()
Test Plan: unit tests
Reviewers: sdong
Reviewed By: sdong
Subscribers: hermanlee4, jkedgar, andrewkr, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D64947
Summary: Use ImmutableDBOptions/MutableDBOptions internally and DBOptions only for user-facing APIs. MutableDBOptions is barely a placeholder for now. I'll start to move options to MutableDBOptions in following diffs.
Test Plan:
make all check
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64065
Summary: One more small refactor before I split DBOptions into mutable and immutable parts.
Test Plan: existing unit tests.
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64047
Summary: There's no reference to ImmutableCFOptions elsewhere in /include/rocksdb. ImmutableCFOptions was introduced in this commit (5665e5e285) but later its reference in /include/rocksdb/table.h is removed.
Test Plan:
make all check
Reviewers: IslamAbdelRahman, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: yhchiang, andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63177
Summary: MyRocks is adding support for the user of the SstFileWriter which needs a comparator. It would be more convenient to get the comparator from the column family (which already has to have it) than to have caller keep track of it.
Test Plan: Standard tests (adding one for the new method)
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61155
Summary: Add option write_buffer_manager to help users control total memory spent on memtables across multiple DB instances.
Test Plan: Add a new unit test.
Reviewers: yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: adela, benj, sumeet, muthu, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59925
Summary: GetCurrentMutableCFOptions() can only be called when DB mutex is held so we cannot call it in CompactionJob::ProcessKeyValueCompaction() since it's not holding the db mutex
Test Plan: make check -j64
Reviewers: sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57471
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
Test Plan:
'export TEST_TMPDIR=/dev/shm/ && DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32' is OK.
I didn't run the Java tests, I don't have Java set up on my devserver.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56133
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
When the table reader is destroyed, it releases the pinned blocks (if there were any). This has to happen before the cache is destroyed, so I had to introduce a TableReader::Close(), to guarantee the order of destruction.
Test Plan:
Added two unit tests for this. Existing unit tests run fine (default is pin_l0_filter_and_index_blocks_in_cache=false).
DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32
Mac: OK.
Linux: with D55287 patched in it's OK.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54801
Summary:
This patch addes ColumnFamilyHandle::GetDescriptor(), which allows
developers to obtain the CF options and names of the associated column
family given its handle.
// Returns the up-to-date descriptor used by the current handle. Since it
// returns the up-to-date information, this call might internally locks
// and releases DB mutex to access the up-to-date CF options.
virtual ColumnFamilyDescriptor GetDescriptor() = 0;
Test Plan: augment column_family_test
Reviewers: sdong, yoshinorim, IslamAbdelRahman, rven, kradhakrishnan, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51543
Summary: Fix some CLANG errors introduced in 7d87f02799
Test Plan: Build with both of CLANG and gcc
Reviewers: rven, yhchiang, kradhakrishnan, anthony, IslamAbdelRahman, ngbronson
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52329
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations. Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention. Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.
Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off). This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex. If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided. This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).
Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield). Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.
Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.
This diff was motivated and inspired by Yahoo's cLSM work. It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.
My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive. With 1
thread I get ~440Kops/sec. Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads. Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.
Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba
Differential Revision: https://reviews.facebook.net/D50589
Summary: It's usually hard for users to set a value of options.delayed_write_rate. With this diff, after slowdown condition triggers, we greedily reduce write rate if estimated pending compaction bytes increase. If estimated compaction pending bytes drop, we increase the write rate.
Test Plan:
Add a unit test
Test with db_bench setting:
TEST_TMPDIR=/dev/shm/ ./db_bench --benchmarks=fillrandom -num=10000000 --soft_pending_compaction_bytes_limit=1000000000 --hard_pending_compaction_bytes_limit=3000000000 --delayed_write_rate=100000000
and make sure without the commit, write stop will happen, but with the commit, it will not happen.
Reviewers: igor, anthony, rven, yhchiang, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52131
Summary:
This diff provides a framework for doing manual
compactions in parallel with other compactions. We now have a deque of manual compactions. We also pass manual compactions as an argument from RunManualCompactions down to
BackgroundCompactions, so that RunManualCompactions can be reentrant.
Parallelism is controlled by the two routines
ConflictingManualCompaction to allow/disallow new parallel/manual
compactions based on already existing ManualCompactions. In this diff, by default manual compactions still have to run exclusive of other compactions. However, by setting the compaction option, exclusive_manual_compaction to false, it is possible to run other compactions in parallel with a manual compaction. However, we are still restricted to one manual compaction per column family at a time. All of these restrictions will be relaxed in future diffs.
I will be adding more tests later.
Test Plan: Rocksdb regression + new tests + valgrind
Reviewers: igor, anthony, IslamAbdelRahman, kradhakrishnan, yhchiang, sdong
Reviewed By: sdong
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47973
Summary: Add a new DB property that calculate the total size of files used by all RocksDB Versions
Test Plan: Unittests for the new property
Reviewers: igor, yhchiang, anthony, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D44799
Summary:
Currently RocksDB silently ignores this issue and doesn't compress the data. Based on discussion, we agree that this is pretty bad because it can cause confusion for our users.
This patch fails DB::Open() if we don't support the compression that is specified in the options.
Test Plan: make check with LZ4 not present. If Snappy is not present all tests will just fail because Snappy is our default library. We should make Snappy the requirement, since without it our default DB::Open() fails.
Reviewers: sdong, MarkCallaghan, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39687
Summary:
Allow EventListener::OnCompactionCompleted to return CompactionJobStats,
which contains useful information about a compaction.
Example CompactionJobStats returned by OnCompactionCompleted():
smallest_output_key_prefix 05000000
largest_output_key_prefix 06990000
elapsed_time 42419
num_input_records 300
num_input_files 3
num_input_files_at_output_level 2
num_output_records 200
num_output_files 1
actual_bytes_input 167200
actual_bytes_output 110688
total_input_raw_key_bytes 5400
total_input_raw_value_bytes 300000
num_records_replaced 100
is_manual_compaction 1
Test Plan: Developed a mega test in db_test which covers 20 variables in CompactionJobStats.
Reviewers: rven, igor, anthony, sdong
Reviewed By: sdong
Subscribers: tnovak, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38463
Summary: Optimistic transactions supporting begin/commit/rollback semantics. Currently relies on checking the memtable to determine if there are any collisions at commit time. Not yet implemented would be a way of enuring the memtable has some minimum amount of history so that we won't fail to commit when the memtable is empty. You should probably start with transaction.h to get an overview of what is currently supported.
Test Plan: Added a new test, but still need to look into stress testing.
Reviewers: yhchiang, igor, rven, sdong
Reviewed By: sdong
Subscribers: adamretter, MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D33435
Summary: CompactRange() now is much more expensive for dynamic level base size as it goes through all the levels. Skip those not used levels between level 0 an base level.
Test Plan: Run all unit tests
Reviewers: yhchiang, rven, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37125
Summary:
CompactRange for universal compaction with num_levels > 1 seems to have a bug. The unit test also has a bug so it doesn't capture the problem.
Fix it. Revert the compact range to the logic equivalent to num_levels=1. Always compact all files together.
It should also fix DBTest.IncreaseUniversalCompactionNumLevels. The issue was that options.write_buffer_size = 100 << 10 and options.write_buffer_size = 100 << 10 are not used in later test scenarios. So write_buffer_size of 4MB was used. The compaction trigger condition is not anymore obvious as expected.
Test Plan: Run the new test and all test suites
Reviewers: yhchiang, rven, kradhakrishnan, anthony, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37551
Summary: Other than making some class members private, this is a documentation-only change
Test Plan: unit tests
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36567
Summary:
Currently users have no idea a key is add, delete or merge from TablePropertiesCollector call back. Add a new function to add it.
Also refactor the codes so that
(1) make table property collector and internal table property collector two separate data structures with the later one now exposed
(2) table builders only receive internal table properties
Test Plan: Add cases in table_properties_collector_test to cover both of old and new ways of using TablePropertiesCollector.
Reviewers: yhchiang, igor.sugak, rven, igor
Reviewed By: rven, igor
Subscribers: meyering, yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D35373
Summary:
To understand the bug read t5943287 and check out the new test in column_family_test (ReadDroppedColumnFamily), iter 0.
RocksDB contract allowes you to read a drop column family as long as there is a live reference. However, since our iteration ignores dropped column families, AddLiveFiles() didn't mark files of a dropped column families as live. So we deleted them.
In this patch I no longer ignore dropped column families in the iteration. I think this behavior was confusing and it also led to this bug. Now if an iterator client wants to ignore dropped column families, he needs to do it explicitly.
Test Plan: Added a new unit test that is failing on master. Unit test succeeds now.
Reviewers: sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32535
Summary:
When having fixed max_bytes_for_level_base, the ratio of size of largest level and the second one can range from 0 to the multiplier. This makes LSM tree frequently irregular and unpredictable. It can also cause poor space amplification in some cases.
In this improvement (proposed by Igor Kabiljo), we introduce a parameter option.level_compaction_use_dynamic_max_bytes. When turning it on, RocksDB is free to pick a level base in the range of (options.max_bytes_for_level_base/options.max_bytes_for_level_multiplier, options.max_bytes_for_level_base] so that real level ratios are close to options.max_bytes_for_level_multiplier.
Test Plan: New unit tests and pass tests suites including valgrind.
Reviewers: MarkCallaghan, rven, yhchiang, igor, ikabiljo
Reviewed By: ikabiljo
Subscribers: yoshinorim, ikabiljo, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31437
Summary:
When using latest clang (3.6 or 3.7/trunck) rocksdb is failing with many errors. Almost all of them are missing override errors. This diff adds missing override keyword. No manual changes.
Prerequisites: bear and clang 3.5 build with extra tools
```lang=bash
% USE_CLANG=1 bear make all # generate a compilation database http://clang.llvm.org/docs/JSONCompilationDatabase.html
% clang-modernize -p . -include . -add-override
% make format
```
Test Plan:
Make sure all tests are passing.
```lang=bash
% #Use default fb code clang.
% make check
```
Verify less error and no missing override errors.
```lang=bash
% # Have trunk clang present in path.
% ROCKSDB_NO_FBCODE=1 CC=clang CXX=clang++ make
```
Reviewers: igor, kradhakrishnan, rven, meyering, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34077
Summary: Add a DB property about live versions. It can be helpful to figure out whether there are files not live but not yet deleted, in some use cases.
Test Plan: make all check
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33327
Summary:
Add a counter for collecting the wait time on db mutex.
Also add MutexWrapper and CondVarWrapper for measuring wait time.
Test Plan:
./db_test
export ROCKSDB_TESTS=MutexWaitStats
./db_test
verify stats output using db_bench
make clean
make release
./db_bench --statistics=1 --benchmarks=fillseq,readwhilewriting --num=10000 --threads=10
Sample output:
rocksdb.db.mutex.wait.micros COUNT : 7546866
Reviewers: MarkCallaghan, rven, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32787
Summary: This adds a listener for compactions, and gives some useful statistics on each compaction pass.
Test Plan: Unit tests.
Reviewers: sdong, igor, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D31641
Summary:
This is first in a series of diffs that fixes data races detected by thread sanitizer.
Here the problem is that we call Ref() on a column family during a single-threaded write, without holding a mutex.
Test Plan: TSAN is no longer complaining about LevelLimitReopen.
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32121
Summary:
This patch changes concurrency guarantees around ColumnFamilySet::column_families_ and ColumnFamilySet::column_families_data_.
Before:
* When mutating: lock DB mutex and spin lock
* When reading: lock DB mutex OR spin lock
After:
* When mutating: lock DB mutex and be in write thread
* When reading: lock DB mutex or be in write thread
That way, we eliminate the spin lock that protects these hash maps and simplify concurrency. That means we don't need to lock the spin lock during writing, since writing is mutually exclusive with column family create/drop (the only operations that mutate those hash maps).
With these new restrictions, I also needed to move column family create to the write thread (column family drop was already in the write thread).
Even though we don't need to lock the spin lock during write, impact on performance should be minimal -- the spin lock is almost never busy, so locking it is almost free.
This addresses task t5116919.
Test Plan:
make check
Stress test with lots and lots of column family drop and create:
time ./db_stress --threads=30 --ops_per_thread=5000000 --max_key=5000 --column_families=200 --clear_column_family_one_in=100000 --verify_before_write=0 --reopen=15 --max_background_compactions=10 --max_background_flushes=10 --db=/fast-rocksdb-tmp/db_stress/
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30651
Summary:
When scaling to higher number of column families, the worst bottleneck was MaybeScheduleFlushOrCompaction(), which did a for loop over all column families while holding a mutex. This patch addresses the issue.
The approach is similar to our earlier efforts: instead of a pull-model, where we do something for every column family, we can do a push-based model -- when we detect that column family is ready to be flushed/compacted, we add it to the flush_queue_/compaction_queue_. That way we don't need to loop over every column family in MaybeScheduleFlushOrCompaction.
Here are the performance results:
Command:
./db_bench --write_buffer_size=268435456 --db_write_buffer_size=268435456 --db=/fast-rocksdb-tmp/rocks_lots_of_cf --use_existing_db=0 --open_files=55000 --statistics=1 --histogram=1 --disable_data_sync=1 --max_write_buffer_number=2 --sync=0 --benchmarks=fillrandom --threads=16 --num_column_families=5000 --disable_wal=1 --max_background_flushes=16 --max_background_compactions=16 --level0_file_num_compaction_trigger=2 --level0_slowdown_writes_trigger=2 --level0_stop_writes_trigger=3 --hard_rate_limit=1 --num=33333333 --writes=33333333
Before the patch:
fillrandom : 26.950 micros/op 37105 ops/sec; 4.1 MB/s
After the patch:
fillrandom : 17.404 micros/op 57456 ops/sec; 6.4 MB/s
Next bottleneck is VersionSet::AddLiveFiles, which is painfully slow when we have a lot of files. This is coming in the next patch, but when I removed that code, here's what I got:
fillrandom : 7.590 micros/op 131758 ops/sec; 14.6 MB/s
Test Plan:
make check
two stress tests:
Big number of compactions and flushes:
./db_stress --threads=30 --ops_per_thread=20000000 --max_key=10000 --column_families=20 --clear_column_family_one_in=10000000 --verify_before_write=0 --reopen=15 --max_background_compactions=10 --max_background_flushes=10 --db=/fast-rocksdb-tmp/db_stress --prefixpercent=0 --iterpercent=0 --writepercent=75 --db_write_buffer_size=2000000
max_background_flushes=0, to verify that this case also works correctly
./db_stress --threads=30 --ops_per_thread=2000000 --max_key=10000 --column_families=20 --clear_column_family_one_in=10000000 --verify_before_write=0 --reopen=3 --max_background_compactions=3 --max_background_flushes=0 --db=/fast-rocksdb-tmp/db_stress --prefixpercent=0 --iterpercent=0 --writepercent=75 --db_write_buffer_size=2000000
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30123
Summary:
Introduces a new class for managing write buffer memory across column
families. We supplement ColumnFamilyOptions::write_buffer_size with
ColumnFamilyOptions::write_buffer, a shared pointer to a WriteBuffer
instance that enforces memory limits before flushing out to disk.
Test Plan: Added SharedWriteBuffer unit test to db_test.cc
Reviewers: sdong, rven, ljin, igor
Reviewed By: igor
Subscribers: tnovak, yhchiang, dhruba, xjin, MarkCallaghan, yoshinorim
Differential Revision: https://reviews.facebook.net/D22581
Summary:
The very last reference happens in DBImpl::GetOptions()
I built with both DBImpl::GetOptions() and ColumnFamilyData::options() commented out
Test Plan: make all check
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29073
Summary:
This diff adds three sets of APIs to RocksDB.
= GetColumnFamilyMetaData =
* This APIs allow users to obtain the current state of a RocksDB instance on one column family.
* See GetColumnFamilyMetaData in include/rocksdb/db.h
= EventListener =
* A virtual class that allows users to implement a set of
call-back functions which will be called when specific
events of a RocksDB instance happens.
* To register EventListener, simply insert an EventListener to ColumnFamilyOptions::listeners
= CompactFiles =
* CompactFiles API inputs a set of file numbers and an output level, and RocksDB
will try to compact those files into the specified level.
= Example =
* Example code can be found in example/compact_files_example.cc, which implements
a simple external compactor using EventListener, GetColumnFamilyMetaData, and
CompactFiles API.
Test Plan:
listener_test
compactor_test
example/compact_files_example
export ROCKSDB_TESTS=CompactFiles
db_test
export ROCKSDB_TESTS=MetaData
db_test
Reviewers: ljin, igor, rven, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D24705
Summary: It turns out that -Wshadow has different rules for gcc than clang. Previous commit fixed clang. This commits fixes the rest of the warnings for gcc.
Test Plan: compiles
Reviewers: ljin, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28131
Summary: as title
Test Plan: ./db_test
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28269
Summary:
Make inplace_update_support and inplace_update_num_locks dynamic.
inplace_callback becomes immutable
We are almost free of references to cfd->options() in db_impl
Test Plan: unit test
Reviewers: igor, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D25293
Summary:
This is not a critical options. Making it dynamic so that we can remove
more reference to cfd->options()
Test Plan: unit test
Reviewers: yhchiang, sdong, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D24957
Summary:
make compaction related options changeable. Most of changes are tedious,
following the same convention: grabs MutableCFOptions at the beginning
of compaction under mutex, then pass it throughout the job and register
it in SuperVersion at the end.
Test Plan: make all check
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23349
