Summary:
Now that v2 is fully functional, the v1 aggregator is removed.
The v2 aggregator has been renamed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4778
Differential Revision: D13495930
Pulled By: abhimadan
fbshipit-source-id: 9d69500a60a283e79b6c4fa938fc68a8aa4d40d6
Summary:
Removed `one_time_use` flag, which removed the need for some
tests, and changed all `NewRangeTombstoneIterator` methods to return
`FragmentedRangeTombstoneIterators`.
These changes also led to removing `RangeDelAggregatorV2::AddUnfragmentedTombstones`
and one of the `MemTableListVersion::AddRangeTombstoneIterators` methods.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4692
Differential Revision: D13106570
Pulled By: abhimadan
fbshipit-source-id: cbab5432d7fc2d9cdfd8d9d40361a1bffaa8f845
Summary:
Previously, range tombstones were accumulated from every level, which
was necessary if a range tombstone in a higher level covered a key in a lower
level. However, RangeDelAggregator::AddTombstones's complexity is based on
the number of tombstones that are currently stored in it, which is wasteful in
the Get case, where we only need to know the highest sequence number of range
tombstones that cover the key from higher levels, and compute the highest covering
sequence number at the current level. This change introduces this optimization, and
removes the use of RangeDelAggregator from the Get path.
In the benchmark results, the following command was used to initialize the database:
```
./db_bench -db=/dev/shm/5k-rts -use_existing_db=false -benchmarks=filluniquerandom -write_buffer_size=1048576 -compression_type=lz4 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 -value_size=112 -key_size=16 -block_size=4096 -level_compaction_dynamic_level_bytes=true -num=5000000 -max_background_jobs=12 -benchmark_write_rate_limit=20971520 -range_tombstone_width=100 -writes_per_range_tombstone=100 -max_num_range_tombstones=50000 -bloom_bits=8
```
...and the following command was used to measure read throughput:
```
./db_bench -db=/dev/shm/5k-rts/ -use_existing_db=true -benchmarks=readrandom -disable_auto_compactions=true -num=5000000 -reads=100000 -threads=32
```
The filluniquerandom command was only run once, and the resulting database was used
to measure read performance before and after the PR. Both binaries were compiled with
`DEBUG_LEVEL=0`.
Readrandom results before PR:
```
readrandom : 4.544 micros/op 220090 ops/sec; 16.9 MB/s (63103 of 100000 found)
```
Readrandom results after PR:
```
readrandom : 11.147 micros/op 89707 ops/sec; 6.9 MB/s (63103 of 100000 found)
```
So it's actually slower right now, but this PR paves the way for future optimizations (see #4493).
----
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4449
Differential Revision: D10370575
Pulled By: abhimadan
fbshipit-source-id: 9a2e152be1ef36969055c0e9eb4beb0d96c11f4d
Summary:
User reported (https://github.com/facebook/rocksdb/issues/4168) that when opening RocksDB in read-only mode, some statistics are not correctly reported. After some investigation, we believe the following counters are indeed not reported during Get() call in a read-only DB:
rocksdb.memtable.hit
rocksdb.memtable.miss
rocksdb.number.keys.read
rocksdb.bytes.read
As well as histogram rocksdb.bytes.per.read
and perf context get_read_bytes
This PR will add the necessary counter reporting logic in the Get() call path
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4260
Differential Revision: D9476431
Pulled By: miasantreble
fbshipit-source-id: 7ab409d4e59df05d09ae8b69fe75554e5aa240d6
Summary:
A framework for tracing and replaying RocksDB operations.
A binary trace file is created by capturing the DB operations, and it can be replayed back at the same rate using db_bench.
- Column-families are supported
- Multi-threaded tracing is supported.
- TraceReader and TraceWriter are exposed to the user, so that tracing to various destinations can be enabled (say, to other messaging/logging services). By default, a FileTraceReader and FileTraceWriter are implemented to capture to a file and replay from it.
- This is not yet ideal to be enabled in production due to large performance overhead, but it can be safely tried out in a shadow setup, say, for analyzing RocksDB operations.
Currently supported DB operations:
- Writes:
-- Put
-- Merge
-- Delete
-- SingleDelete
-- DeleteRange
-- Write
- Reads:
-- Get (point lookups)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3837
Differential Revision: D7974837
Pulled By: sagar0
fbshipit-source-id: 8ec65aaf336504bc1f6ed0feae67f6ed5ef97a72
Summary:
Currently it is not possible to change bloom filter config without restart the db, which is causing a lot of operational complexity for users.
This PR aims to make it possible to dynamically change bloom filter config.
Closes https://github.com/facebook/rocksdb/pull/3601
Differential Revision: D7253114
Pulled By: miasantreble
fbshipit-source-id: f22595437d3e0b86c95918c484502de2ceca120c
Summary:
This PR comments out the rest of the unused arguments which allow us to turn on the -Wunused-parameter flag. This is the second part of a codemod relating to https://github.com/facebook/rocksdb/pull/3557.
Closes https://github.com/facebook/rocksdb/pull/3662
Differential Revision: D7426121
Pulled By: Dayvedde
fbshipit-source-id: 223994923b42bd4953eb016a0129e47560f7e352
Summary:
On iterator create, take a snapshot, create a ReadCallback and pass the ReadCallback to the underlying DBIter to check if key is committed.
Closes https://github.com/facebook/rocksdb/pull/2981
Differential Revision: D6001471
Pulled By: yiwu-arbug
fbshipit-source-id: 3565c4cdaf25370ba47008b0e0cb65b31dfe79fe
Summary:
Add a new function in Listener to let the caller know when rocksdb
is stalling writes.
Closes https://github.com/facebook/rocksdb/pull/2897
Differential Revision: D5860124
Pulled By: schischi
fbshipit-source-id: ee791606169aa64f772c86f817cebf02624e05e1
Summary:
Add and implement Iterator::Refresh(). When this function is called, if the super version doesn't change, update the sequence number of the iterator to the latest one and invalidate the iterator. If the super version changed, recreated the whole iterator. This can help users reuse the iterator more easily.
Closes https://github.com/facebook/rocksdb/pull/2621
Differential Revision: D5464500
Pulled By: siying
fbshipit-source-id: f548bd35e85c1efca2ea69273802f6704eba6ba9
Summary:
This reverts the previous commit 1d7048c598, which broke the build.
Did a `git revert 1d7048c`.
Closes https://github.com/facebook/rocksdb/pull/2627
Differential Revision: D5476473
Pulled By: sagar0
fbshipit-source-id: 4756ff5c0dfc88c17eceb00e02c36176de728d06
Summary: This uses `clang-tidy` to comment out unused parameters (in functions, methods and lambdas) in fbcode. Cases that the tool failed to handle are fixed manually.
Reviewed By: igorsugak
Differential Revision: D5454343
fbshipit-source-id: 5dee339b4334e25e963891b519a5aa81fbf627b2
Summary:
Throughput: 46k tps in our sysbench settings (filling the details later)
The idea is to have the simplest change that gives us a reasonable boost
in 2PC throughput.
Major design changes:
1. The WAL file internal buffer is not flushed after each write. Instead
it is flushed before critical operations (WAL copy via fs) or when
FlushWAL is called by MySQL. Flushing the WAL buffer is also protected
via mutex_.
2. Use two sequence numbers: last seq, and last seq for write. Last seq
is the last visible sequence number for reads. Last seq for write is the
next sequence number that should be used to write to WAL/memtable. This
allows to have a memtable write be in parallel to WAL writes.
3. BatchGroup is not used for writes. This means that we can have
parallel writers which changes a major assumption in the code base. To
accommodate for that i) allow only 1 WriteImpl that intends to write to
memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes
come via group commit phase which is serial anyway, ii) make all the
parts in the code base that assumed to be the only writer (via
EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are
protected via a stat_mutex_.
Note: the first commit has the approach figured out but is not clean.
Submitting the PR anyway to get the early feedback on the approach. If
we are ok with the approach I will go ahead with this updates:
0) Rebase with Yi's pipelining changes
1) Currently batching is disabled by default to make sure that it will be
consistent with all unit tests. Will make this optional via a config.
2) A couple of unit tests are disabled. They need to be updated with the
serial commit of 2PC taken into account.
3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires
releasing mutex_ beforehand (the same way EnterUnbatched does). This
needs to be cleaned up.
Closes https://github.com/facebook/rocksdb/pull/2345
Differential Revision: D5210732
Pulled By: maysamyabandeh
fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
Summary:
DBIter, and in-turn NewDBIterator and NewArenaWrappedDBIterator, take a bunch of params. They can be reduced by passing in ReadOptions directly instead of passing in every new param separately. It also seems much cleaner as a bunch of the params towards the end seem to be optional.
(Recently I introduced max_skippable_internal_keys, which added one more to the already huge count).
Idea courtesy IslamAbdelRahman
Closes https://github.com/facebook/rocksdb/pull/2116
Differential Revision: D4857128
Pulled By: sagar0
fbshipit-source-id: 7d239df094b94bd9ea79d145cdf825478ac037a8
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
Summary:
Operations like Seek/Next/Prev sometimes take too long to complete when there are many internal keys to be skipped. Adding an option, max_skippable_internal_keys -- which could be used to set a threshold for the maximum number of keys that can be skipped, will help to address these cases where it is much better to fail a request (as incomplete) than to wait for a considerable time for the request to complete.
This feature -- to fail an iterator seek request as incomplete, is disabled by default when max_skippable_internal_keys = 0. It is enabled only when max_skippable_internal_keys > 0.
This feature is based on the discussion mentioned in the PR https://github.com/facebook/rocksdb/pull/1084.
Closes https://github.com/facebook/rocksdb/pull/2000
Differential Revision: D4753223
Pulled By: sagar0
fbshipit-source-id: 1c973f7
Summary:
PinnableSlice
Summary:
Currently the point lookup values are copied to a string provided by the
user. This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.
Here is the summary for improvements:
value 100 byte: 1.8% regular, 1.2% merge values
value 1k byte: 11.5% regular, 7.5% merge values
value 10k byte: 26% regular, 29.9% merge values
The improvement for merge could be more if we extend this approach to
pin the merge output and delay the full merge operation until the user
actually needs it. We have put that for future work.
PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The d
Closes https://github.com/facebook/rocksdb/pull/1756
Differential Revision: D4391738
Pulled By: maysamyabandeh
fbshipit-source-id: 6f3edd3
Summary:
Currently the point lookup values are copied to a string provided by the user.
This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.
Here is the summary for improvements:
1. value 100 byte: 1.8% regular, 1.2% merge values
2. value 1k byte: 11.5% regular, 7.5% merge values
3. value 10k byte: 26% regular, 29.9% merge values
The improvement for merge could be more if we extend this approach to
pin the merge output and delay the full merge operation until the user
actually needs it. We have put that for future work.
PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The difference
is a little and could be noise. More importantly it is safely
cancelled
Closes https://github.com/facebook/rocksdb/pull/1732
Differential Revision: D4374613
Pulled By: maysamyabandeh
fbshipit-source-id: a077f1a
Summary:
Since a RangeDelAggregator is created for each read request, these heap-allocating member variables were consuming significant CPU (~3% total) which slowed down request throughput. The map and pinning manager are only necessary when range deletions exist, so we can defer their initialization until the first range deletion is encountered. Currently lazy initialization is done for reads only since reads pass us a single snapshot, which is easier to store on the stack for later insertion into the map than the vector passed to us by flush or compaction.
Note the Arena member variable is still expensive, I will figure out what to do with it in a subsequent diff. It cannot be lazily initialized because we currently use this arena even to allocate empty iterators, which is necessary even when no range deletions exist.
Closes https://github.com/facebook/rocksdb/pull/1539
Differential Revision: D4203488
Pulled By: ajkr
fbshipit-source-id: 3b36279
Summary:
Note: reviewed in https://reviews.facebook.net/D65115
- DBIter maintains a range tombstone accumulator. We don't cleanup obsolete tombstones yet, so if the user seeks back and forth, the same tombstones would be added to the accumulator multiple times.
- DBImpl::NewInternalIterator() (used to make DBIter's underlying iterator) adds memtable/L0 range tombstones, L1+ range tombstones are added on-demand during NewSecondaryIterator() (see D62205)
- DBIter uses ShouldDelete() when advancing to check whether keys are covered by range tombstones
Closes https://github.com/facebook/rocksdb/pull/1464
Differential Revision: D4131753
Pulled By: ajkr
fbshipit-source-id: be86559
Summary:
During Get()/MultiGet(), build up a RangeDelAggregator with range
tombstones as we search through live memtable, immutable memtables, and
SST files. This aggregator is then used by memtable.cc's SaveValue() and
GetContext::SaveValue() to check whether keys are covered.
added tests for Get on memtables/files; end-to-end tests mainly in https://reviews.facebook.net/D64761
Closes https://github.com/facebook/rocksdb/pull/1456
Differential Revision: D4111271
Pulled By: ajkr
fbshipit-source-id: 6e388d4
Summary: Use ImmutableDBOptions/MutableDBOptions internally and DBOptions only for user-facing APIs. MutableDBOptions is barely a placeholder for now. I'll start to move options to MutableDBOptions in following diffs.
Test Plan:
make all check
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64065
Summary: We want to provide a way to detect whether an iterator is stale and needs to be recreated. Add a iterator property to return version number.
Test Plan: Add two unit tests for it.
Reviewers: IslamAbdelRahman, yhchiang, anthony, kradhakrishnan, andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54921
Summary: Seems like the cleanest way to resolve this is to move CompactedDBImpl into db/. CompactedDBImpl should probably live in the same place as DBImplReadonly since Opening the latter could end up instantiating the former. Both DBImplReadonly and CompactedDBImpl inherit from DBImpl access protected members of DBImpl( and the latter access friendly private methods).
Test Plan: unit tests
Reviewers: sdong, yhchiang, kradhakrishnan, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42027
Summary:
GetThreadList() feature depends on the thread creation and destruction, which is currently handled under Env.
This patch moves GetThreadList() feature under Env to better manage the dependency of GetThreadList() feature
on thread creation and destruction.
Renamed ThreadStatusImpl to ThreadStatusUpdater. Add ThreadStatusUtil, which is a static class contains
utility functions for ThreadStatusUpdater.
Test Plan: run db_test, thread_list_test and db_bench and verify the life cycle of Env and ThreadStatusUpdater is properly managed.
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: ljin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30057
Summary:
db_imp_readonly.o is one of the big obj file. If it's not a necessary
feature, we should probably block it in ROCKSDB_LITE.
1322704 Nov 24 16:55 db/db_impl_readonly.o
Test Plan:
make shared_lib -j32
make ROCKSDB_LITE shared_lib -j32
Reviewers: ljin, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29583
Summary:
Add GetThreadList API, which allows developer to track the
status of each process. Currently, calling GetThreadList will
only get the list of background threads in RocksDB with their
thread-id and thread-type (priority) set. Will add more support
on this in the later diffs.
ThreadStatus currently has the following properties:
// An unique ID for the thread.
const uint64_t thread_id;
// The type of the thread, it could be ROCKSDB_HIGH_PRIORITY,
// ROCKSDB_LOW_PRIORITY, and USER_THREAD
const ThreadType thread_type;
// The name of the DB instance where the thread is currently
// involved with. It would be set to empty string if the thread
// does not involve in any DB operation.
const std::string db_name;
// The name of the column family where the thread is currently
// It would be set to empty string if the thread does not involve
// in any column family.
const std::string cf_name;
// The event that the current thread is involved.
// It would be set to empty string if the information about event
// is not currently available.
Test Plan:
./thread_list_test
export ROCKSDB_TESTS=GetThreadList
./db_test
Reviewers: rven, igor, sdong, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D25047
Summary:
This is not a critical options. Making it dynamic so that we can remove
more reference to cfd->options()
Test Plan: unit test
Reviewers: yhchiang, sdong, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D24957
Summary: perf_context.get_from_output_files_time is now only set writable DB's DB::Get(). Extend it to MultiGet() and read only DB.
Test Plan:
make all check
Fix perf_context_test and extend it to cover MultiGet(), as long as read-only DB. Run it and watch the results
Reviewers: ljin, yhchiang, igor
Reviewed By: igor
Subscribers: rven, leveldb
Differential Revision: https://reviews.facebook.net/D24207
Summary:
info_log from supplied Options can be nullptr. Using the one from
db_impl. Also call flush after that since no more loggging will happen
and LOG can contain partial output
Test Plan: verified with db_bench
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D24183
Summary:
Add a CompactedDBImpl that will enabled when calling OpenForReadOnly()
and the DB only has one level (>0) of files. As a performan comparison,
CuckooTable performs 2.1M/s with CompactedDBImpl vs. 1.78M/s with
ReadOnlyDBImpl.
Test Plan: db_bench
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23553
Summary: To follow the coding convention and make sure when passing reference as a parameter it is also const, pass MergeContext as a pointer to mem tables.
Test Plan: make all check
Reviewers: ljin, igor
Reviewed By: igor
Subscribers: leveldb, dhruba, yhchiang
Differential Revision: https://reviews.facebook.net/D23085
Summary: removed reference to options in WriteBatch and DBImpl::Get()
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23049
Summary:
I found it is almost impossible to get rid of this function in a single
batch. I will take a step by step approach
Test Plan: make release
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22995
Summary: as title
Test Plan: make release
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22935
Summary: In DBImpl::Recover method, while loading memtables, also check if memtables are empty. Use this in DBImplReadonly to determine whether to lookup memtable or not.
Test Plan:
db_test
make check all
Reviewers: sdong, yhchiang, ljin, igor
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22281
Summary:
As discussed in our internal group, we don't get much use of seek compaction at the moment, while it's making code more complicated and slower in some cases.
This diff removes seek compaction and (hopefully) all code that was introduced to support seek compaction.
There is one test case that relied on didIO information. I'll try to find another way to implement it.
Test Plan: make check
Reviewers: sdong, haobo, yhchiang, ljin, dhruba
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19161
Summary:
One of our profilings shows that Version::Get() sometimes is slow when getting pointer of user comparators or other global objects. In this patch:
(1) we keep pointers of immutable objects in Version to avoid accesses them though option objects or cfd objects
(2) table_reader is directly cached in FileMetaData so that table cache don't have to go through handle first to fetch it
(3) If level 0 has less than 3 files, skip the filtering logic based on SST tables' key range. Smallest and largest key are stored in separated memory locations, which has potential cache misses
Test Plan: make all check
Reviewers: haobo, ljin
Reviewed By: haobo
CC: igor, yhchiang, nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D17739
Summary:
replace the super version acquisision in tailing itrator with thread
local
Test Plan: will post results
Reviewers: igor, haobo, sdong, yhchiang, dhruba
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17757
Summary: When opening DB in read-only mode, client can choose to only specify a subset of column families ("default" column family can't be omitted, though)
Test Plan: added a unit test in column_family_test
Reviewers: haobo, sdong, ljin, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17565
