Commit Graph

13 Commits

Author SHA1 Message Date
mrambacher
3dff28cf9b Use SystemClock* instead of std::shared_ptr<SystemClock> in lower level routines (#8033)
Summary:
For performance purposes, the lower level routines were changed to use a SystemClock* instead of a std::shared_ptr<SystemClock>.  The shared ptr has some performance degradation on certain hardware classes.

For most of the system, there is no risk of the pointer being deleted/invalid because the shared_ptr will be stored elsewhere.  For example, the ImmutableDBOptions stores the Env which has a std::shared_ptr<SystemClock> in it.  The SystemClock* within the ImmutableDBOptions is essentially a "short cut" to gain access to this constant resource.

There were a few classes (PeriodicWorkScheduler?) where the "short cut" property did not hold.  In those cases, the shared pointer was preserved.

Using db_bench readrandom perf_level=3 on my EC2 box, this change performed as well or better than 6.17:

6.17: readrandom   :      28.046 micros/op 854902 ops/sec;   61.3 MB/s (355999 of 355999 found)
6.18: readrandom   :      32.615 micros/op 735306 ops/sec;   52.7 MB/s (290999 of 290999 found)
PR: readrandom   :      27.500 micros/op 871909 ops/sec;   62.5 MB/s (367999 of 367999 found)

(Note that the times for 6.18 are prior to revert of the SystemClock).

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8033

Reviewed By: pdillinger

Differential Revision: D27014563

Pulled By: mrambacher

fbshipit-source-id: ad0459eba03182e454391b5926bf5cdd45657b67
2021-03-15 04:34:11 -07:00
mrambacher
12f1137355 Add a SystemClock class to capture the time functions of an Env (#7858)
Summary:
Introduces and uses a SystemClock class to RocksDB.  This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock.

Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead.  There are likely more places that can be changed, but this is a start to show what can/should be done.  Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock.

There are several Env classes that implement these functions.  Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR.  It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc).

Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858

Reviewed By: pdillinger

Differential Revision: D26006406

Pulled By: mrambacher

fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90
2021-01-25 22:09:11 -08:00
Zhichao Cao
d8ec0a760a Make FileType Public and Replace kLogFile with kWalFile (#7580)
Summary:
As suggested by pdillinger ,The name of kLogFile is misleading, in some tests, kLogFile is defined as info log. Replace it with kWalFile and move it to public, which will be used in https://github.com/facebook/rocksdb/issues/7523

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7580

Test Plan: make check

Reviewed By: riversand963

Differential Revision: D24485420

Pulled By: zhichao-cao

fbshipit-source-id: 955e3dacc1021bb590fde93b0a568ffe9ad80799
2020-10-22 17:06:20 -07:00
Levi Tamasi
ac3ae1df0b Find/purge obsolete blob files (#6807)
Summary:
The patch extends `FindObsoleteFiles` and `PurgeObsoleteFiles` with
support for blob files. The behavior is analogous to SST files: obsolete
blob files are put on the "candidates for deletion" list, while live (and pending)
files are preserved.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6807

Test Plan: `make check`

Reviewed By: riversand963

Differential Revision: D21406249

Pulled By: ltamasi

fbshipit-source-id: 1948f71c31927564b61e8af394f50ca3964880d9
2020-05-07 09:32:51 -07:00
Cheng Chang
ee50b8d499 Be able to decrease background thread's CPU priority when creating database backup (#6602)
Summary:
When creating a database backup, the background threads will not only consume IO resources by copying files, but also consuming CPU such as by computing checksums. During peak times, the CPU consumption by the background threads might affect online queries.

This PR makes it possible to decrease CPU priority of these threads when creating a new backup.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6602

Test Plan: make check

Reviewed By: siying, zhichao-cao

Differential Revision: D20683216

Pulled By: cheng-chang

fbshipit-source-id: 9978b9ed9488e8ce135e90ca083e5b4b7221fd84
2020-03-28 19:07:25 -07:00
Zhichao Cao
4246888101 Pass IOStatus to write path and set retryable IO Error as hard error in BG jobs (#6487)
Summary:
In the current code base, we use Status to get and store the returned status from the call. Specifically, for IO related functions, the current Status cannot reflect the IO Error details such as error scope, error retryable attribute, and others. With the implementation of https://github.com/facebook/rocksdb/issues/5761, we have the new Wrapper for IO, which returns IOStatus instead of Status. However, the IOStatus is purged at the lower level of write path and transferred to Status.

The first job of this PR is to pass the IOStatus to the write path (flush, WAL write, and Compaction). The second job is to identify the Retryable IO Error as HardError, and set the bg_error_ as HardError. In this case, the DB Instance becomes read only. User is informed of the Status and need to take actions to deal with it (e.g., call db->Resume()).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6487

Test Plan: Added the testing case to error_handler_fs_test. Pass make asan_check

Reviewed By: anand1976

Differential Revision: D20685017

Pulled By: zhichao-cao

fbshipit-source-id: ff85f042896243abcd6ef37877834e26f36b6eb0
2020-03-27 16:04:43 -07:00
Yanqin Jin
fb09ef05dc Attempt to recover from db with missing table files (#6334)
Summary:
There are situations when RocksDB tries to recover, but the db is in an inconsistent state due to SST files referenced in the MANIFEST being missing. In this case, previous RocksDB will just fail the recovery and return a non-ok status.
This PR enables another possibility. During recovery, RocksDB checks possible MANIFEST files, and try to recover to the most recent state without missing table file. `VersionSet::Recover()` applies version edits incrementally and "materializes" a version only when this version does not reference any missing table file. After processing the entire MANIFEST, the version created last will be the latest version.
`DBImpl::Recover()` calls `VersionSet::Recover()`. Afterwards, WAL replay will *not* be performed.
To use this capability, set `options.best_efforts_recovery = true` when opening the db. Best-efforts recovery is currently incompatible with atomic flush.

Test plan (on devserver):
```
$make check
$COMPILE_WITH_ASAN=1 make all && make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6334

Reviewed By: anand1976

Differential Revision: D19778960

Pulled By: riversand963

fbshipit-source-id: c27ea80f29bc952e7d3311ecf5ee9c54393b40a8
2020-03-20 19:30:48 -07:00
Zhichao Cao
8d73137ae8 Replace Directory with FSDirectory in DB (#6468)
Summary:
In the current code base, we can use Directory from Env to manage directory (e.g, Fsync()). The PR https://github.com/facebook/rocksdb/issues/5761  introduce the File System as a new Env API. So we further replace the Directory class in DB with FSDirectory such that we can have more IO information from IOStatus returned by FSDirectory.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6468

Test Plan: pass make asan_check

Differential Revision: D20195261

Pulled By: zhichao-cao

fbshipit-source-id: 93962cb9436852bfcfb76e086d9e7babd461cbe1
2020-03-02 16:16:26 -08:00
sdong
fdf882ded2 Replace namespace name "rocksdb" with ROCKSDB_NAMESPACE (#6433)
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433

Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.

Differential Revision: D19977691

fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
2020-02-20 12:09:57 -08:00
Vijay Nadimpalli
979fbdc696 Persistent globally unique DB ID in manifest (#5725)
Summary:
Each DB has a globally unique ID. A DB can be physically copied around, or backed-up and restored, and the users should be identify the same DB. This unique ID right now is stored as plain text in file IDENTITY under the DB directory. This approach introduces at least two problems: (1) the file is not checksumed; (2) the source of truth of a DB is the manifest file, which can be copied separately from IDENTITY file, causing the DB ID to be wrong.
The goal of this PR is solve this problem by moving the  DB ID to manifest. To begin with we will write to both identity file and manifest. Write to Manifest is controlled via the flag write_dbid_to_manifest in Options and default is false.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5725

Test Plan: Added unit tests.

Differential Revision: D16963840

Pulled By: vjnadimpalli

fbshipit-source-id: 8a86a4c8c82c716003c40fd6b9d2d758030d92e9
2019-09-03 08:52:24 -07:00
Zhongyi Xie
d1c9ede195 Fix duplicated file names in PurgeObsoleteFiles (#5603)
Summary:
Currently in `DBImpl::PurgeObsoleteFiles`, the list of candidate files is create through a combination of calling LogFileName using `log_delete_files` and `full_scan_candidate_files`.

In full_scan_candidate_files, the filenames look like this
{file_name = "074715.log", file_path = "/txlogs/3306"},
but LogFileName produces filenames like this that prepends a slash:
{file_name = "/074715.log", file_path = "/txlogs/3306"},

This confuses the dedup step here: bb4178066d/db/db_impl/db_impl_files.cc (L339-L345)

Because duplicates still exist, DeleteFile is called on the same file twice, and hits an error on the second try. Error message: Failed to mark /txlogs/3302/764418.log as trash.

The root cause is the use of `kDumbDbName` when generating file names, it creates file names like /074715.log. This PR removes the use of `kDumbDbName` and create paths without leading '/' when dbname can be ignored.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5603

Test Plan: make check

Differential Revision: D16413203

Pulled By: miasantreble

fbshipit-source-id: 6ba8288382c55f7d5e3892d722fc94b57d2e4491
2019-08-01 15:50:05 -07:00
Siying Dong
cb094e13bb Auto roll logger to enforce options.keep_log_file_num immediately after a new file is created (#5370)
Summary:
Right now, with auto roll logger, options.keep_log_file_num enforcement is triggered by events like DB reopen or full obsolete scan happens. In the mean time, the size and number of log files can grow without a limit. We put a stronger enforcement to the option, so that the number of log files can always under control.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5370

Differential Revision: D15570413

Pulled By: siying

fbshipit-source-id: 0916c3c4d42ab8fdd29389ee7fd7e1557b03176e
2019-05-31 10:50:19 -07:00
Siying Dong
545d206040 Move some file related files outside util/ (#5375)
Summary:
util/ means for lower level libraries, so it's a good idea to move the files which requires knowledge to DB out. Create a file/ and move some files there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5375

Differential Revision: D15550935

Pulled By: siying

fbshipit-source-id: 61a9715dcde5386eebfb43e93f847bba1ae0d3f2
2019-05-29 20:47:06 -07:00