Summary:
A generic algorithm in progress depends on a templatized
version of fastrange, so this change generalizes it and renames
it to fit our style guidelines, FastRange32, FastRange64, and now
FastRangeGeneric.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7436
Test Plan: added a few more test cases
Reviewed By: jay-zhuang
Differential Revision: D23958153
Pulled By: pdillinger
fbshipit-source-id: 8c3b76101653417804997e5f076623a25586f3e8
Summary:
Add new AppendWithVerify and PositionedAppendWithVerify APIs to Env and FileSystem to bring the data verification information (data checksum information) from upper layer (e.g., WritableFileWriter) to the storage layer. This PR only include the API definition, no functional codes are added to unblock other developers which depend on these APIs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7419
Test Plan: make -j32
Reviewed By: pdillinger
Differential Revision: D23883196
Pulled By: zhichao-cao
fbshipit-source-id: 94676c26bc56144cc32e3661f84f21eccd790411
Summary:
Two relatively simple functional changes to incremental backup
behavior, integrated with a minor refactoring to reduce code redundancy and
improve error/log message. There are nuances to the impact of these changes,
but I believe they are fundamentally good and generally safe. Those functional
changes:
* Incremental backups no longer read DB table files that are already saved to a
shared part of the backup directory, unless `share_files_with_checksum` is used
with `kLegacyCrc32cAndFileSize` naming (discouraged) where crc32c full file
checksums are needed to determine file naming.
* Justification: incremental backups should not need to read the whole DB,
especially without rate limiting. (Although other BackupEngine reads are not
rate limited either, other non-trivial reads are generally limited by a
corresponding write, as in copying files.) Also, the fact that this is not
already fixed was arguably a bug/oversight in the implementation of https://github.com/facebook/rocksdb/issues/7110.
* When considering whether a table file is already backed up in a shared part
of backup directory, BackupEngine would already query the sizes of source (DB)
and pre-existing destination (backup) files. BackupEngine now uses these file
sizes to detect corruption, as at least one of (a) old backup, (b) backup in
progress, or (c) current DB is corrupt if there's a size mismatch.
* Justification: a random related fix that also helps to cover a small hole
in corruption checking uncovered by the other functional change:
* For `share_table_files` without "checksum" (not recommended), the other
change regresses in detecting fundamentally unsafe use of this option
combination: when you might generate different versions of same SST file
number. As demonstrated by `BackupableDBTest.FailOverwritingBackups,` this
regression is greatly mitigated by the new file size checking. Nevertheless,
almost no reason to use `share_files_with_checksum=false` should remain, and
comments are updated appropriately.
Also, this change renames internal function `CalculateChecksum` to
`ReadFileAndComputeChecksum` to make the performance impact of this function
clear in code reviews.
It is not clear what 'same_path' is for in backupable_db.cc, and I suspect it
cannot be true for a DB with unique file names (like DBImpl). Nevertheless,
I've tried to keep its functionality intact when `true` to minimize risk for
now, despite having no unit tests for which it is true.
Select impact details (much more in unit tests): For
`share_files_with_checksum`, I am confident there is no regression (vs.
pre-6.12) in detecting DB or backup corruption at backup creation time, mostly
because the old design did not leverage this extra checksum computation for
detecting inconsistencies at backup creation time. (With computed checksums in
names, a recently corrupted file just looked like a different file vs. what was
already backed up.)
Even in the hypothetical case of DB session id collision (~100 bits entropy
collision), file size in name and/or our file size check add an extra layer of
protection against false success in creating an accurate new backup. (Unit test
included.)
`DB::VerifyChecksum` and `BackupEngine::VerifyBackup` with checksum checking
are still able to catch corruptions that `CreateNewBackup` does not. Note that
when custom file checksum support is added to BackupEngine, that will
essentially give the same power as `DB::VerifyChecksum` into `CreateNewBackup`.
We could add options for `CreateNewBackup` to cover some of what would be
caught by `VerifyBackup` with checksum checking.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7413
Test Plan:
Two new unit tests included, both of which fail without these
changes. Although we don't test the I/O improvement directly, we test it
indirectly in DB corruption detection power that was inadvertently unlocked
with new backup file naming PLUS computing current content checksums (now
removed). (I don't think that case of DB corruption detection justifies reading
the whole DB on incremental backup.)
Reviewed By: zhichao-cao
Differential Revision: D23818480
Pulled By: pdillinger
fbshipit-source-id: 148aff16f001af5b9fd4b22f155311c2461f1bac
Summary:
This change reverts BackupEngine to 6.12 state to accommodate a
higher-priority fix that does not easily merge with this custom checksum
support. We intend to reinstate this support soon, by merging a revert
of this change.
For backupable_db_test, I've removed the tests depending on this
feature.
I've also removed relevant HISTORY.md entry.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7411
Test Plan: unit tests
Reviewed By: ajkr
Differential Revision: D23793835
Pulled By: pdillinger
fbshipit-source-id: 7e861436539584799b13d1a8ae559b81b6d08052
Summary:
Prior to 6.12, backup files using share_files_with_checksum had
the file size encoded in the file name, after the last '\_' and before
the last '.'. We considered this an implementation detail subject to
change, and indeed removed this information from the file name (with an
option to use old behavior) because it was considered
ineffective/inefficient for file name uniqueness. However, some
downstream RocksDB users were relying on this information since the file
size is not explicitly in the backup manifest file.
This primary purpose of this change is "retrofitting" the 6.12 release
(not yet a public release) to simultaneously support the benefits of the
new naming scheme (I/O performance and data correctness at scale) and
preserve the file size information, both as default behaviors. With this
change, we are essentially making the file size information encoded in
the file name an official, though obscure, extension of the backup meta
file format.
We preserve an option (kLegacyCrc32cAndFileSize) to use the original
"legacy" naming scheme, with its caveats, and make it easy to omit the
file size information (no kFlagIncludeFileSize), for more compact file
names. But note that changing the naming scheme used on an existing db
and backup directory can lead to transient space amplification, as some
files will be stored under two names in the shared_checksum directory.
Because some backups were saved using the original 6.12 naming scheme,
we offer two ways of dealing with those files: SST files generated by
older 6.12 versions can either use the default naming scheme in effect
when the SST files were generated (kFlagMatchInterimNaming, default, no
transient space amplification) or can use a new naming scheme (no
kFlagMatchInterimNaming, potential space amplification because some
already stored files getting a new name).
We don't have a natural way to detect which files were generated by
previous 6.12 versions, but this change hacks one in by changing DB
session ids to now use a more concise encoding, reducing file name
length, saving ~dozen bytes from SST files, and making them visually
distinct from DB ids so that they are less likely to be mixed up.
Two final auxiliary notes:
Recognizing that the backup file names have become a de facto part of
the backup meta schema, this change makes them easier to parse and
extend by putting a distinct marker, 's', before DB session ids embedded
in the name. When we extend this to allow custom checksums in the name,
they can get their own marker to ensure safe parsing. For backward
compatibility, file size does not get a marker but is assumed for
`_[0-9]+[.]`
Another change from initial 6.12 default behavior is never including
file custom checksum in the file name. Looking ahead to 6.13, we do not
want the default behavior to cause backup space amplification for
someone turning on file custom checksum checking in BackupEngine; we
want that to be an easy decision. When implemented, including file
custom checksums in backup file names will be a non-default option.
Actual file name patterns and priorities, as regexes:
kLegacyCrc32cAndFileSize OR pre-6.12 SST file ->
[0-9]+_[0-9]+_[0-9]+[.]sst
kFlagMatchInterimNaming set (default) AND early 6.12 SST file ->
[0-9]+_[0-9a-fA-F-]+[.]sst
kUseDbSessionId AND NOT kFlagIncludeFileSize ->
[0-9]+_s[0-9A-Z]{20}[.]sst
kUseDbSessionId AND kFlagIncludeFileSize (default) ->
[0-9]+_s[0-9A-Z]{20}_[0-9]+[.]sst
We might add opt-in options for more '\_' separated data in the name,
but embedded file size, if present, will always be after last '\_' and
before '.sst'.
This change was originally applied to version 6.12. (See https://github.com/facebook/rocksdb/issues/7390)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7400
Test Plan:
unit tests included. Sync point callbacks are used to mimic
previous version SST files.
Reviewed By: ajkr
Differential Revision: D23759587
Pulled By: pdillinger
fbshipit-source-id: f62d8af4e0978de0a34f26288cfbe66049b70025
Summary:
This PR merges the functionality of making the ColumnFamilyOptions, TableFactory, and DBOptions into Configurable into a single PR, resolving any merge conflicts
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5753
Reviewed By: ajkr
Differential Revision: D23385030
Pulled By: zhichao-cao
fbshipit-source-id: 8b977a7731556230b9b8c5a081b98e49ee4f160a
Summary:
The patch adds support for exposing the start of the expiration range
for TTL blob files through the `GetLiveFilesMetaData` API. This can be
used for monitoring purposes, i.e. to make sure TTL blob files are
deleted in a timely manner. The patch also fixes a couple of uninitialized
variable issues.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7365
Test Plan: `make check`
Reviewed By: pdillinger
Differential Revision: D23605465
Pulled By: ltamasi
fbshipit-source-id: 97a9612bf5f4b058423debdd3f28f576bb23a70f
Summary:
(1) Skip check on specific key if restoring an old backup
(small minority of cases) because it can fail in those cases. (2) Remove
an old assertion about number of column families and number of keys
passed in, which is broken by atomic flush (cf_consistency) test. Like
other code (for better or worse) assume a single key and iterate over
column families. (3) Apply mock_direct_io to NewSequentialFile so that
db_stress backup works on /dev/shm.
Also add more context to output in case of backup/restore db_stress
failure.
Also a minor fix to BackupEngine to report first failure status in
creating new backup, and drop another clue about the potential
source of a "Backup failed" status.
Reverts "Disable backup/restore stress test (https://github.com/facebook/rocksdb/issues/7350)"
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7357
Test Plan:
Using backup_one_in=10000,
"USE_CLANG=1 make crash_test_with_atomic_flush" for 30+ minutes
"USE_CLANG=1 make blackbox_crash_test" for 30+ minutes
And with use_direct_reads with TEST_TMPDIR=/dev/shm/rocksdb
Reviewed By: riversand963
Differential Revision: D23567244
Pulled By: pdillinger
fbshipit-source-id: e77171c2e8394d173917e36898c02dead1c40b77
Summary:
The patch adds a class called `BlobFileBuilder` that can be used to build
and cut blob files in background jobs (flushes/compactions). The class
enforces a value size threshold (`min_blob_size`; smaller blobs will be inlined
in the LSM tree itself), and supports specifying a blob file size limit (`blob_file_size`),
as well as compression (`blob_compression_type`) and checksums for blob files.
It also keeps track of the generated blob files and their associated `BlobFileAddition`
metadata, which can be applied as part of the background job's `VersionEdit`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7306
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D23298817
Pulled By: ltamasi
fbshipit-source-id: 38f35d81dab1ba81f15236240612ec173d7f21b5
Summary:
This is a "real" fix for the issue worked around in https://github.com/facebook/rocksdb/issues/7294.
To get DB checksum info for live files, we now read the manifest file
that will become part of the checkpoint/backup. This requires a little
extra handling in taking a custom checkpoint, including only reading the
manifest file up to the size prescribed by the checkpoint.
This moves GetFileChecksumsFromManifest from backup code to
file_checksum_helper.{h,cc} and removes apparently unnecessary checking
related to column families.
Updated HISTORY.md and warned potential future users of
DB::GetLiveFilesChecksumInfo()
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7309
Test Plan: updated unit test, before and after
Reviewed By: ajkr
Differential Revision: D23311994
Pulled By: pdillinger
fbshipit-source-id: 741e30a2dc1830e8208f7648fcc8c5f000d4e2d5
Summary:
More tests now pass. When in doubt, I added a TODO comment to check what should happen with an ignored error.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7305
Reviewed By: akankshamahajan15
Differential Revision: D23301262
Pulled By: ajkr
fbshipit-source-id: 5f120edc7393560aefc0633250277bbc7e8de9e6
Summary:
SeqAdvanceConcurrentTest sometimes runs too long on some platforms. Disable fsync to speed it up.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7302
Test Plan: Run the tests and watch CI.
Reviewed By: ajkr
Differential Revision: D23298192
fbshipit-source-id: 2185eed4e0958c3de5e8a3f94ceed5be5945ed37
Summary:
On a read-write DB configured with
DBOptions::file_checksum_gen_factory, BackupEngine::CreateNewBackup can
fail intermittently, with non-OK status. This is due to a race between
GetLiveFiles and GetLiveFilesChecksumInfo in creating backups.
For patching 6.12 release (as this commit is intended for, except this is a
forward-merged version), we can simply treat files for which we falsely failed
to get checksum info as legacy files lacking checksum info.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7294
Test Plan: unit test reproducer included
Reviewed By: ajkr
Differential Revision: D23253489
Pulled By: pdillinger
fbshipit-source-id: 9e4945dad120b776ad3e753be10b962f61f28e14
Summary:
This test uses database functionality and required more extensive work to get it to pass than the other tests. The DB functionality required for this test now passes the check.
When it was unclear what the proper behavior was for unchecked status codes, a TODO was added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7283
Reviewed By: akankshamahajan15
Differential Revision: D23251497
Pulled By: ajkr
fbshipit-source-id: 52b79629bdafa0a58de8ead1d1d66f141b331523
Summary:
Some tests like BackupableDBTest.FileCollision and
ShareTableFilesWithChecksumsNewNaming are intermittently failing,
probably due to unpredictable flushing with FillDB. This change
should fix the failures seen and help to prevent similar flakiness in
future tests in the file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7273
Test Plan: make check, and with valgrind
Reviewed By: siying
Differential Revision: D23176947
Pulled By: pdillinger
fbshipit-source-id: 654b73a64db475f2b9b065ed53a889a8b9083c59
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
This commit reinstates https://github.com/facebook/rocksdb/issues/7049, whose un-revert was lost in an automatic
infrastructure mis-merge.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7274
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D23177444
fbshipit-source-id: 1f61690b2ac6333c3b2c87176fef6b2cba086b33
Summary:
The param tests did not take any effect previously. This PR re-enables it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7260
Test Plan: Some manual tests and `./backupable_db_test`.
Reviewed By: siying
Differential Revision: D23140902
Pulled By: pdillinger
fbshipit-source-id: cd62b11b926affed25127d9074fa97a1c7f748c4
Summary:
The flaky test in the title is caused by two problems. First, there is a bug in the BackupEngine that results in skipping computing the default crc32 checksum when `share_table_files` is enabled and the table is already backed up. Second, when `RestoreDBFromBackup` fails and the backup was being restored to the DB directory, it is likely that `RestoreDBFromBackup` has cleaned up the DB directory before it fails, and therefore, files in old backups may collide with files to be backed up if `share_files_with_checksum` is not enabled.
New tests that cover the above problems are added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7254
Test Plan: `./backupable_db_test`
Reviewed By: pdillinger
Differential Revision: D23118715
Pulled By: gg814
fbshipit-source-id: 7be8de912808944be59e93d602c7431a54c079eb
Summary:
A new option `std::shared_ptr<FileChecksumGenFactory> backup_checksum_gen_factory` is added to `BackupableDBOptions`. This allows custom checksum functions to be used for creating, verifying, or restoring backups.
Tests are added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7085
Test Plan: Passed make check
Reviewed By: pdillinger
Differential Revision: D22390756
Pulled By: gg814
fbshipit-source-id: 3b7756ca444c2129844536b91c3ca09f53b6248f
Summary:
We have a number of tests hanging on MacOS and windows due to
mishandling of code for mock sleeps. In addition, the code was in
terrible shape because the same variable (addon_time_) would sometimes
refer to microseconds and sometimes to seconds. One test even assumed it
was nanoseconds but was written to pass anyway.
This has been cleaned up so that DB tests generally use a SpecialEnv
function to mock sleep, for either some number of microseconds or seconds
depending on the function called. But to call one of these, the test must first
call SetMockSleep (precondition enforced with assertion), which also turns
sleeps in RocksDB into mock sleeps. To also removes accounting for actual
clock time, call SetTimeElapseOnlySleepOnReopen, which implies
SetMockSleep (on DB re-open). This latter setting only works by applying
on DB re-open, otherwise havoc can ensue if Env goes back in time with
DB open.
More specifics:
Removed some unused test classes, and updated comments on the general
problem.
Fixed DBSSTTest.GetTotalSstFilesSize using a sync point callback instead
of mock time. For this we have the only modification to production code,
inserting a sync point callback in flush_job.cc, which is not a change to
production behavior.
Removed unnecessary resetting of mock times to 0 in many tests. RocksDB
deals in relative time. Any behaviors relying on absolute date/time are likely
a bug. (The above test DBSSTTest.GetTotalSstFilesSize was the only one
clearly injecting a specific absolute time for actual testing convenience.) Just
in case I misunderstood some test, I put this note in each replacement:
// NOTE: Presumed unnecessary and removed: resetting mock time in env
Strengthened some tests like MergeTestTime, MergeCompactionTimeTest, and
FilterCompactionTimeTest in db_test.cc
stats_history_test and blob_db_test are each their own beast, rather deeply
dependent on MockTimeEnv. Each gets its own variant of a work-around for
TimedWait in a mock time environment. (Reduces redundancy and
inconsistency in stats_history_test.)
Intended follow-up:
Remove TimedWait from the public API of InstrumentedCondVar, and only
make that accessible through Env by passing in an InstrumentedCondVar and
a deadline. Then the Env implementations mocking time can fix this problem
without using sync points. (Test infrastructure using sync points interferes
with individual tests' control over sync points.)
With that change, we can simplify/consolidate the scattered work-arounds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7101
Test Plan: make check on Linux and MacOS
Reviewed By: zhichao-cao
Differential Revision: D23032815
Pulled By: pdillinger
fbshipit-source-id: 7f33967ada8b83011fb54e8279365c008bd6610b
Summary:
We're going to support more locking protocols such as range lock in transaction.
However, in current design, `TransactionBase` has a member `tracked_keys` which assumes that point lock (lock a single key) is used, and is used in snapshot checking (isolation protocol). When using range lock, we may use read committed instead of snapshot checking as the isolation protocol.
The most significant usage scenarios of `tracked_keys` are:
1. pessimistic transaction uses it to track the locked keys, and unlock these keys when commit or rollback.
2. optimistic transaction does not lock keys upfront, it only tracks the lock intentions in tracked_keys, and do write conflict checking when commit.
3. each `SavePoint` tracks the keys that are locked since the `SavePoint`, `RollbackToSavePoint` or `PopSavePoint` relies on both the tracked keys in `SavePoint`s and `tracked_keys`.
Based on these scenarios, if we can abstract out a `LockTracker` interface to hold a set of tracked locks (can be keys or key ranges), and have methods that can be composed together to implement the scenarios, then `tracked_keys` can be an internal data structure of one implementation of `LockTracker`. See `utilities/transactions/lock/lock_tracker.h` for the detailed interface design, and `utilities/transactions/lock/point_lock_tracker.cc` for the implementation.
In the future, a `RangeLockTracker` can be implemented to track range locks without affecting other components.
After this PR, a clean interface for lock manager should be possible, and then ideally, we can have pluggable locking protocols.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7013
Test Plan: Run `transaction_test` and `optimistic_transaction_test`.
Reviewed By: ajkr
Differential Revision: D22163706
Pulled By: cheng-chang
fbshipit-source-id: f2860577b5334e31dd2994f5bc6d7c40d502b1b4
Summary:
FaultInjectionTestFS::NewDirectory currently asserts that the directory
creation on the target filesystem succeeds. This is actually not
guaranteed since there might be a legitimate I/O error when creating the
directory. The patch removes this assertion.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7220
Test Plan: `make check`
Reviewed By: zhichao-cao
Differential Revision: D22957990
Pulled By: ltamasi
fbshipit-source-id: b2e221320d8ce7235cb4897ef5936072412a25b6
Summary:
Previously, a `ReadOptions` object was stored in every `BlockBasedTableIterator`
and every `LevelIterator`. This redundancy consumes extra memory,
resulting in the `Arena` making more allocations, and iteration
observing worse cache performance.
This PR migrates callers of `NewInternalIterator()` and
`MakeInputIterator()` to provide a `ReadOptions` object guaranteed to
outlive the returned iterator. When the iterator's lifetime will be managed by the
user, this lifetime guarantee is achieved by storing the `ReadOptions`
value in `ArenaWrappedDBIter`. Then, sub-iterators of `NewInternalIterator()` and
`MakeInputIterator()` can hold a reference-to-const `ReadOptions`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7210
Test Plan:
- `make check` under ASAN and valgrind
- benchmark: on a DB with 2 L0 files and 3 L1+ levels, this PR reduced `Arena` allocation 4792 -> 4160 bytes.
Reviewed By: anand1976
Differential Revision: D22861323
Pulled By: ajkr
fbshipit-source-id: 54aebb3e89c872eeab0f5793b4b6e42878d093ce
Summary:
Make (most of) the env*_test pass when ASSERT_STATUS_CHECKED is enabled.
One test that opens a database is currently disabled in this mode, as there are many errors that need revisited for DB tests and status checks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7176
Reviewed By: cheng-chang
Differential Revision: D22799278
Pulled By: ajkr
fbshipit-source-id: 16d8a02eaeecd6df1060249b6a5811292801f2ed
Summary:
Fix the data race warning by removing an unnecessary variable that causes the warning.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7177
Test Plan:
`COMPILE_WITH_TSAN=1 make backupable_db_test`
`./backupable_db_test --gtest_filter=*TableFileWithDbChecksumCorruptedDuringBackup*`
Reviewed By: riversand963
Differential Revision: D22774430
Pulled By: gg814
fbshipit-source-id: 3b0b1ac344d0375c64da564cc97f98745c289959
Summary:
BackupableDBTest.RateLimiting test is failing due to timed out
on our test server. It might be because of nested loops run sequentially that test different type of combinations of parameters. This patch converts the test into parameterized test so that all combinations can be tested out.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7167
Test Plan: make check -j64
Reviewed By: zhichao-cao
Differential Revision: D22709531
Pulled By: akankshamahajan15
fbshipit-source-id: 95518153e87b3b5311a6c1960a191bca58898786
Summary:
BlobDB currently syncs each blob file periodically after writing a certain amount of
data (as specified by the configuration option `BlobDBOptions::bytes_per_sync`)
and all open blob files when the base DB's memtables are flushed. With the patch,
in addition to the above, blob files are also synced right before being closed, after
the footer has been written. This will be beneficial for the new integrated blob file
write path as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7160
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D22672646
Pulled By: ltamasi
fbshipit-source-id: 62b34263543a7e74abcbb7adf011daa1e699998f
Summary:
BackupEngine requires computing table checksums twice when backing up table files to the `shared_checksum` directory.
The repeated computation can be avoided by utilizing the db session id stored as a part of the table properties.
Filenames of table files in the `shared_checksum` directory depend on the following conditions:
1. the naming scheme is `kOptionalChecksumAndDbSessionId`,
2. `db_session_id` is not empty,
3. checksum is available in the DB manifest.
If 1,2,3 are satisfied, then the filenames will be of the form `<file_number>_<checksum>_<db_session_id>.sst`.
If 1,2 are satisfied, then the filenames will be of the form `<file_number>_<db_session_id>.sst`.
In all other cases, the filenames are of the form `<file_number>_<checksum>_<size>.sst`.
Additionally, if `kOptionalChecksumAndDbSessionId` is used (and not falling back to `kChecksumAndFileSize`), the `<checksum>` appeared in the filenames is hexadecimally encoded, instead of being plain `uint32_t` value.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7110
Test Plan: backupable_db_test and manual tests.
Reviewed By: ajkr
Differential Revision: D22508992
Pulled By: gg814
fbshipit-source-id: 5669f0ea9ad5a097f69f6d87aca4abba15032389
Summary:
Periodic syncing of blob files is handled by a lower layer, namely by
`WritableFileWriter`; the `NeedsFsync` method of `BlobFile` and the
`last_fsync_` member variable are actually unused and thus can be
removed. See also https://github.com/facebook/rocksdb/pull/7125 .
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7138
Test Plan: `make check`
Reviewed By: zhichao-cao
Differential Revision: D22562981
Pulled By: ltamasi
fbshipit-source-id: c235aad94a7c27120528c9ec270a7a5b9154e49f
Summary:
In both cases where `BlobDBImpl::DecompressSlice` is called,
`compression_type` is already checked at the call site; thus, the check
inside the method is redundant and can be turned into an assertion.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7127
Test Plan: `make check`
Reviewed By: zhichao-cao
Differential Revision: D22533454
Pulled By: ltamasi
fbshipit-source-id: ae524443fc6abe0a5fb12327a3fe761a9cd2c831
Summary:
https://github.com/facebook/rocksdb/pull/6850, which added compaction
filter support to BlobDB, reused elements of the BlobDB GC mechanism.
This patch updates some log messages in this logic to account for this
fact; namely, it replaces mentions of "GC" with "compaction/GC" to avoid
confusion in cases when GC is not enabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7128
Test Plan: `make check`
Reviewed By: zhichao-cao
Differential Revision: D22535371
Pulled By: ltamasi
fbshipit-source-id: 1f14f3b02ab9983728bbca1cf680420208d9a195
Summary:
Periodic syncing of blob files is performed by `WritableFileWriter`;
`bytes_per_sync_` and `next_sync_offset_` in `BlobLogWriter` are
actually unused (or more precisely, only used by methods that are
themselves unused). The patch removes all this dead code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7125
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D22531021
Pulled By: ltamasi
fbshipit-source-id: 6b293ad5a79d3e6bf15c5c68f7aedd7ce7a15f10
Summary:
CLANG analyze is useful before pull request. Add it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7114
Test Plan: Watch the CI results to succeed.
Reviewed By: riversand963
Differential Revision: D22491942
fbshipit-source-id: 9ccad91c6142fedc3d3dd491cf55054827908f36
Summary:
Cleans up some of the dependencies on test code in the Makefile while building tools:
- Moves the test::RandomString, DBBaseTest::RandomString into Random
- Moves the test::RandomHumanReadableString into Random
- Moves the DestroyDir method into file_utils
- Moves the SetupSyncPointsToMockDirectIO into sync_point.
- Moves the FaultInjection Env and FS classes under env
These changes allow all of the tools to build without dependencies on test_util, thereby simplifying the build dependencies. By moving the FaultInjection code, the dependency in db_stress on different libraries for debug vs release was eliminated.
Tested both release and debug builds via Make and CMake for both static and shared libraries.
More work remains to clean up how the tools are built and remove some unnecessary dependencies. There is also more work that should be done to get the Makefile and CMake to align in their builds -- what is in the libraries and the sizes of the executables are different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7097
Reviewed By: riversand963
Differential Revision: D22463160
Pulled By: pdillinger
fbshipit-source-id: e19462b53324ab3f0b7c72459dbc73165cc382b2
Summary:
Although PR https://github.com/facebook/rocksdb/issues/7032 fixes the construction of the `SstFileDumper` in `GetFileDbIdentities` by setting a proper `Env` of the `Options` passed in the constructor, the file path was not corrected accordingly. This actually disables backup engine to use db session ids in the file names since the `db_session_id` is always empty.
Now it is fixed by setting the correct path in the construction of `SstFileDumper`. Furthermore, to preserve the Direct IO property that backup engine already has, parameter `EnvOptions` is added to `GetFileDbIdentities` and `SstFileDumper`.
The `BackupUsingDirectIO` test is updated accordingly.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7104
Test Plan: backupable_db_test and some manual tests.
Reviewed By: ajkr
Differential Revision: D22443245
Pulled By: gg814
fbshipit-source-id: 056a9bb8b82947c5e73d7c3fbb62bfe23af5e562
Summary:
The fix in PR https://github.com/facebook/rocksdb/issues/7082 is not really successful because there is still a small chance that the test will fail.
In addtion to flushing, we close the DB and then reopen before corrupting a table file in the DB. Specifically, we corrupt a table file before backup takes place as follows.
* Open DB
* Fill DB
* Flush DB (optional, no flushing here also works)
* Close DB
* Reopen DB
* Corrupt a table file in the DB
This should make the test reliable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7102
Test Plan:
`while ./backupable_db_test --gtest_filter=*TableFileCorruptedBeforeBackup*; do true; done`
(kept running for an hour or so :)
Reviewed By: pdillinger
Differential Revision: D22432417
Pulled By: gg814
fbshipit-source-id: d407eee93ff428bb662f80cde1659fbf0149d0cd
Summary:
If the corruption of a table file is done before flushing, then db manifest may record the checksum for the corrupted table, which results in "matching checksums" when backup engine tries to verfiy the checksum, and causes a flaky test.
Fix the issue by adding `Flush()` before trying to corrupt a table file in *db*.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7082
Test Plan:
`buck test`
Without the fix, failed 5 of 100 tests.
Suspected whether the pseudo randomness causes the issue: doubling `keys_iteration` resulted in 2 of 100 tests failed; deterministically corrupting tables file also caused 2 of 100 tests to fail.
With the fix, passed 200 of 200 tests.
Reviewed By: pdillinger
Differential Revision: D22375421
Pulled By: gg814
fbshipit-source-id: 7304618e7520684b6087e42d0b58329c5ad18329
Summary:
When table file checksums are enabled and stored in the DB manifest by using the RocksDB default crc32c checksum function, BackupEngine will calculate the crc32c checksum of the file to be copied and compare the calculated result with the one stored in the DB manifest before copying the file to the backup directory.
After copying to the backup directory, BackupEngine will verify the checksum of the copied file with the one calculated before copying. This helps detect some rare corruption events such as bit-flips during the copying process.
No verification with checksums in DB manifest will be performed if the table file checksum function is not the RocksDB default crc32c checksum function.
In addition, If `share_table_files` and `share_files_with_checksum` are true, BackupEngine will compare the checksums computed before and after copying of the table files.
Corresponding tests are added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7015
Test Plan: Passed make check
Reviewed By: pdillinger
Differential Revision: D22165732
Pulled By: gg814
fbshipit-source-id: ee0e8cc397c455eba64545c29380b9d9853588ec
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7049
Test Plan: Run all existing files.
Reviewed By: pdillinger
Differential Revision: D22301700
fbshipit-source-id: f9a9e3b3b26ce640665a47cb8bff33ba0c89b565
Summary:
GetFileDbIdentities requires either db_id non-null or db_session_id non-null.
Passing nullptr for db_id or db_session_id in CopyOrCreateFile indicates the caller does not want to obtain the value for db_id or db_session_id.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7063
Test Plan:
USE_CLANG=1 make analyze
backupable_db_test
Reviewed By: pdillinger
Differential Revision: D22338497
Pulled By: gg814
fbshipit-source-id: 2aa2dcc14d156b0f99b07d6cf3c731ee088272cd
Summary:
`bool BackupableDBOptions::new_naming_for_backup_files` is updated to `BackupTableNameOption BackupableDBOptions::share_files_with_checksum_naming`, where `BackupTableNameOption` is an `enum` type with two enumerators `kChecksumAndFileSize` and `kChecksumAndFileSize`. This opens up possibilities of extenting the current naming scheme for backup table files. By default, `BackupTableNameOption BackupableDBOptions::share_files_with_checksum_naming` is set to `kChecksumAndDbSessionId`.
Revert `BackupEngine::VerifyBackup` to only check file sizes by default.
Also fix the construction of the `SstFileDumper` in `GetFileDbIdentities` by setting a proper `Env` of the `Options` passed in the constructor.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7032
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D22237763
Pulled By: gg814
fbshipit-source-id: 466902a4e731babd64e30f0e82ca1aa82962e52e
Summary:
Added compaction filter support for BlobDB non-TTL values. Same as vanilla RocksDB, user compaction filter applies to all k/v pairs of the compaction for non-TTL values. It honors `min_blob_size`, which potentially results value transitions between inlined data and stored-in-blob data when size of value is changed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6850
Reviewed By: siying
Differential Revision: D22263487
Pulled By: ltamasi
fbshipit-source-id: 8fc03f8cde2a5c831e63b436b3dbf1b7f90939e8
Summary:
Current implementation of the ```read_options.deadline``` option only checks the deadline for random file reads during point lookups. This PR extends the checks to file opens, prefetches and preloads as part of table open.
The main changes are in the ```BlockBasedTable```, partitioned index and filter readers, and ```TableCache``` to take ReadOptions as an additional parameter. In ```BlockBasedTable::Open```, in order to retain existing behavior w.r.t checksum verification and block cache usage, we filter out most of the options in ```ReadOptions``` except ```deadline```. However, having the ```ReadOptions``` gives us more flexibility to honor other options like verify_checksums, fill_cache etc. in the future.
Additional changes in callsites due to function signature changes in ```NewTableReader()``` and ```FilePrefetchBuffer```.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6982
Test Plan: Add new unit tests in db_basic_test
Reviewed By: riversand963
Differential Revision: D22219515
Pulled By: anand1976
fbshipit-source-id: 8a3b92f4a889808013838603aa3ca35229cd501b
Summary:
A parameter `verify_with_checksum` is added to `BackupEngine::VerifyBackup`, which is true by default. So now `BackupEngine::VerifyBackup` verifies backup files with checksum AND file size by default. When `verify_with_checksum` is false, `BackupEngine::VerifyBackup` only compares file sizes to verify backup files.
Also add a test for the case when corruption does not change the file size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7014
Test Plan: Passed backupable_db_test
Reviewed By: zhichao-cao
Differential Revision: D22165590
Pulled By: gg814
fbshipit-source-id: 606a7450714e868bceb38598c89fd356c6004f4f
Summary:
Some tests directly uses TmpDir() as temporary directory without adding any randomize factor. This would cause failures when tests run in parallel. Fix it by moving some of them to test::PerThreadDBPath()
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7030
Test Plan: Watch existing tests pass
Reviewed By: zhichao-cao
Differential Revision: D22224710
fbshipit-source-id: 28c9932fede0a4a64670e5b5fdb08f4fb5dccdd0
Summary:
`BackupableDBOptions::new_naming_for_backup_files` is added. This option is false by default. When it is true, backup table filenames under directory shared_checksum are of the form `<file_number>_<crc32c>_<db_session_id>.sst`.
Note that when this option is true, it comes into effect only when both `share_files_with_checksum` and `share_table_files` are true.
Three new test cases are added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6997
Test Plan: Passed make check.
Reviewed By: ajkr
Differential Revision: D22098895
Pulled By: gg814
fbshipit-source-id: a1d9145e7fe562d71cde7ac995e17cb24fd42e76
Summary:
The constant `kNoExpiration` is currently defined in an
internal/implementation header (`blob_log_format.h`); the patch moves it
to the public header `blob_db.h` so it is accessible to users.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7018
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D22191354
Pulled By: ltamasi
fbshipit-source-id: 98c8012a83b999a3f1a30e955ce6bb71ba29dc5c
Summary:
Persistent cache feature caused rocks db crash on windows. I posted a issue for it, https://github.com/facebook/rocksdb/issues/6919. I found this is because no "persistent_cache_key_prefix" is generated for persistent cache. Looking repo history, "GetUniqueIdFromFile" is not implemented on Windows. So my fix is adding "NewId()" function in "persistent_cache" and using it to generate prefix for persistent cache. In this PR, i also re-enable related test cases defined in "db_test2" and "persistent_cache_test" for windows.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6932
Test Plan:
1. run related test cases in "db_test2" and "persistent_cache_test" on windows and see it passed.
2. manually run db_bench.exe with "read_cache_path" and verified.
Reviewed By: riversand963
Differential Revision: D21911608
Pulled By: cheng-chang
fbshipit-source-id: cdfd938d54a385edbb2836b13aaa1d39b0a6f1c2
Summary:
Confusing checks for null that are never null
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6933
Test Plan: make check
Reviewed By: cheng-chang
Differential Revision: D21885466
Pulled By: pdillinger
fbshipit-source-id: 4b48e03c2a33727f2702b0d12292f9fda5a3c475
Summary:
Mostly uninitialized values: some probably written before use, but some seem like bugs. Also, destructor needs to be virtual, and possible use-after-free in test
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6935
Test Plan: make check
Reviewed By: siying
Differential Revision: D21885484
Pulled By: pdillinger
fbshipit-source-id: e2e7cb0a0cf196f2b55edd16f0634e81f6cc8e08
Summary:
StringAppendOperatorTest right now runs in a mode where RUN_ALL_TESTS() is executed twice for the same test but different settings. This creates a problem with a tool that expects every test to run once. Fix it by using a parameterized test instead.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6930
Test Plan: Run the test and see it passed.
Reviewed By: ltamasi
Differential Revision: D21874145
fbshipit-source-id: 55520b2d7f1ba9f3cba1e2d087fe86f43fb06145
Summary:
This reverts commit 8d87e9cea1.
Based on offline discussions, it's too early to upgrade to gtest 1.10, as it prevents some developers from using an older version of gtest to integrate to some other systems. Revert it for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6923
Reviewed By: pdillinger
Differential Revision: D21864799
fbshipit-source-id: d0726b1ff649fc911b9378f1763316200bd363fc
Summary:
x.size() -1 or y - 1 can overflow to an extremely large value when x.size() pr y is 0 when they are unsigned type. The end condition of i in the for loop will be extremely large, potentially causes segment fault. Fix them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6902
Test Plan: pass make asan_check
Reviewed By: ajkr
Differential Revision: D21843767
Pulled By: zhichao-cao
fbshipit-source-id: 5b8b88155ac5a93d86246d832e89905a783bb5a1
Summary:
production code under utilities/cassandra depends on gtest.h. Remove them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6908
Test Plan: Run all existing tests.
Reviewed By: ajkr
Differential Revision: D21842606
fbshipit-source-id: a098e0b49c9aeac51cc90a79562ad9897a36122c
Summary:
* Add missing unit test for schema stability of FileChecksumGenCrc32c
(previously was only comparing to itself)
* A lot of clarifying comments
* Add some assertions for preconditions
* Rename WritableFileWriter::CalculateFileChecksum -> UpdateFileChecksum
* Simplify FileChecksumGenCrc32c with shared functions
* Implement EndianSwapValue to replace unused EndianTransform
And incidentally since I had trouble with 'make check-format' GitHub action disagreeing with local run,
* Output full diagnostic information when 'make check-format' fails in CI
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6861
Test Plan: new unit test passes before & after other changes
Reviewed By: zhichao-cao
Differential Revision: D21667115
Pulled By: pdillinger
fbshipit-source-id: 6a99970f87605aa024fa540c78cd519ff322c3e6
Summary:
In level compaction, if the total size (even if compensated after taking account of the deletions) of a level hasn't exceeded the limit, but there are lots of deletion entries in some SST files of the level, these files should also be good candidates for compaction. Otherwise, queries for the deleted keys might be slow because they need to go over all the tombstones.
This PR adds an option `deletion_ratio` to the factory of `CompactOnDeletionCollector` to configure it to trigger compaction when the ratio of tombstones >= `deletion_ratio`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6806
Test Plan:
Added new unit test in `compact_on_deletion_collector_test.cc`.
make compact_on_deletion_collector_test && ./compact_on_deletion_collector_test
Reviewed By: ajkr
Differential Revision: D21511981
Pulled By: cheng-chang
fbshipit-source-id: 65a9d0150e8c9c00337787686475252e4535a3e1
Summary:
https://github.com/facebook/rocksdb/pull/6807 extends the logic that
identifies and purges obsolete files to blob files handled by RocksDB
itself. In order to prevent that from interfering with the current BlobDB code,
we need to make sure that `BlobDBOptions::blob_dir` is different from
the storage directories used by the base DB. (Note: this is true by default.)
The patch adds a check that explicitly disallows this configuration and
returns `Status::NotSupported` from `BlobDB::Open` in such cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6810
Test Plan: Tested using the BlobDB mode of `db_bench`.
Reviewed By: riversand963
Differential Revision: D21412676
Pulled By: ltamasi
fbshipit-source-id: 6630cc7481e48c8bf55d59423b25f14d52ffe681
Summary:
When expiration is set in a pessimistic transaction, `txn_state_` is already updated to `AWAITING_PREPARE` in the `if (expiration_time_ > 0)` block, there is no need to update the state in `if (can_prepare)` block again.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6778
Test Plan: make check
Reviewed By: lth
Differential Revision: D21335319
Pulled By: cheng-chang
fbshipit-source-id: 251d634cc7d1a0e86e673a59f0bda8584da5a35f
Summary:
In current commit protocol of pessimistic transaction, if the transaction is not prepared before commit, the commit protocol implicitly assumes that the user wants to commit without prepare.
This PR adds TransactionOptions::skip_prepare, the default value is `true` because if set to `false`, all existing users who commit without prepare need to update their code to set skip_prepare to true. Although this does not force the user to explicitly express their intention of skip_prepare, it at least lets the user be aware of the assumption of being able to commit without prepare.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6775
Test Plan: added a new unit test TransactionTest::CommitWithoutPrepare
Reviewed By: lth
Differential Revision: D21313270
Pulled By: cheng-chang
fbshipit-source-id: 3d95b7c9b2d6cdddc09bdd66c561bc4fae8c3251
Summary:
Calculate ```IOOptions::timeout``` using ```ReadOptions::deadline``` and pass it to ```FileSystem::Read/FileSystem::MultiRead```. This allows us to impose a tighter bound on the time taken by Get/MultiGet on FileSystem/Envs that support IO timeouts. Even on those that don't support, check in ```RandomAccessFileReader::Read``` and ```MultiRead``` and return ```Status::TimedOut()``` if the deadline is exceeded.
For now, TableReader creation, which might do file opens and reads, are not covered. It will be implemented in another PR.
Tests:
Update existing unit tests to verify the correct timeout value is being passed
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6751
Reviewed By: riversand963
Differential Revision: D21285631
Pulled By: anand1976
fbshipit-source-id: d89af843e5a91ece866e87aa29438b52a65a8567
Summary:
The dynamic_cast in the filter benchmark causes release mode to fail due to
no-rtti. Replace with static_cast_with_check.
Signed-off-by: Derrick Pallas <derrick@pallas.us>
Addition by peterd: Remove unnecessary 2nd template arg on all static_cast_with_check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6732
Reviewed By: ltamasi
Differential Revision: D21304260
Pulled By: pdillinger
fbshipit-source-id: 6e8eb437c4ca5a16dbbfa4053d67c4ad55f1608c
Summary:
If an error happens during BlobDBImpl::Open after the base DB has been
opened, we need to destroy the `ColumnFamilyHandle`s returned by `DB::Open`
to prevent an assertion in `ColumnFamilySet`'s destructor from being hit.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6763
Test Plan: Ran `make check` and tested using the BlobDB mode of `db_bench`.
Reviewed By: riversand963
Differential Revision: D21262643
Pulled By: ltamasi
fbshipit-source-id: 60ebc7ab19be66cf37fbe5f6d8957d58470f3d3b
Summary:
The methods in convenience.h are used to compare/convert objects to/from strings. There is a mishmash of parameters in use here with more needed in the future. This PR replaces those parameters with a single structure.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6389
Reviewed By: siying
Differential Revision: D21163707
Pulled By: zhichao-cao
fbshipit-source-id: f807b4cc7e2b0af3871536b69546b2604dfa81bd
Summary:
Based on https://github.com/facebook/rocksdb/issues/6648 (CLA Signed), but heavily modified / extended:
* Implicit capture of this via [=] deprecated in C++20, and [=,this] not standard before C++20 -> now using explicit capture lists
* Implicit copy operator deprecated in gcc 9 -> add explicit '= default' definition
* std::random_shuffle deprecated in C++17 and removed in C++20 -> migrated to a replacement in RocksDB random.h API
* Add the ability to build with different std version though -DCMAKE_CXX_STANDARD=11/14/17/20 on the cmake command line
* Minimal rebuild flag of MSVC is deprecated and is forbidden with /std:c++latest (C++20)
* Added MSVC 2019 C++11 & MSVC 2019 C++20 in AppVeyor
* Added GCC 9 C++11 & GCC9 C++20 in Travis
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6697
Test Plan: make check and CI
Reviewed By: cheng-chang
Differential Revision: D21020318
Pulled By: pdillinger
fbshipit-source-id: 12311be5dbd8675a0e2c817f7ec50fa11c18ab91
Summary:
Log it in the info log to help in troubleshooting. It is logged as follows -
```
2020/04/10-10:51:39.886662 7ffff7fef340 Options.table_properties_collectors: CompactOnDeletionCollector (Sliding window size = 100 Deletion trigger = 90);
```
Tests:
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6686
Reviewed By: ltamasi
Differential Revision: D21002442
Pulled By: anand1976
fbshipit-source-id: 7adf0dbae7f1febcb00ce61fea5097118ede5c6a
Summary:
Although there are tests related to locking in transaction_test, this new test directly tests against TransactionLockMgr.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6599
Test Plan: make transaction_lock_mgr_test && ./transaction_lock_mgr_test
Reviewed By: lth
Differential Revision: D20673749
Pulled By: cheng-chang
fbshipit-source-id: 1fa4a13218e68d785f5a99924556751a8c5c0f31
Summary:
When creating a database backup, the background threads will not only consume IO resources by copying files, but also consuming CPU such as by computing checksums. During peak times, the CPU consumption by the background threads might affect online queries.
This PR makes it possible to decrease CPU priority of these threads when creating a new backup.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6602
Test Plan: make check
Reviewed By: siying, zhichao-cao
Differential Revision: D20683216
Pulled By: cheng-chang
fbshipit-source-id: 9978b9ed9488e8ce135e90ca083e5b4b7221fd84
Summary:
1. If expiration_time is non-positive, no need to call NowMicros, save a syscall.
2. expire_time should only be set when expired is false.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6586
Test Plan: make check
Reviewed By: lth
Differential Revision: D20673730
Pulled By: cheng-chang
fbshipit-source-id: a69e8d7b16dc6d0d00487bb1c19f0710d79482e2
Summary:
The last key may hit index of out bound exception when id = 9.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6574
Reviewed By: riversand963
Differential Revision: D20699791
Pulled By: cheng-chang
fbshipit-source-id: 8e2c5be5ff0e53e9857cfd59cea97cff21446819
Summary:
This test was written like a stress test, using up to 3x26GB
RSS memory during parallel 'make check'. Now, while this code is mostly
dormant, I've made the "for Travis" versions of the expensive tests the
canonical versions and disabled the expensive versions. This has the
side benefit of removing some arbitrary conditional compilation.
For unknown reason, the super expensive tests were gated on
Snappy_Supported, which appears to be irrelevant, so I removed it.
The tests can be fixed / improved / migrated to stress test if/when they
are deemed important again.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6601
Test Plan:
make check + CI
./persistent_cache_test Before:
...
[==========] 10 tests from 2 test cases ran. (114541 ms total)
[ PASSED ] 10 tests.
YOU HAVE 1 DISABLED TEST
After:
...
[==========] 3 tests from 2 test cases ran. (1714 ms total)
[ PASSED ] 3 tests.
YOU HAVE 10 DISABLED TESTS
Reviewed By: siying
Differential Revision: D20680983
Pulled By: pdillinger
fbshipit-source-id: 2be0fde13eeb0a71110ac7f5477cfe63996a509e
Summary:
As the first step of reintroducing eviction statistics for the block
cache, the patch switches from using simple function pointers as deleters
to function objects implementing an interface. This will enable using
deleters that have state, like a smart pointer to the statistics object
that is to be updated when an entry is removed from the cache. For now,
the patch adds a deleter template class `SimpleDeleter`, which simply
casts the `value` pointer to its original type and calls `delete` or
`delete[]` on it as appropriate. Note: to prevent object lifecycle
issues, deleters must outlive the cache entries referring to them;
`SimpleDeleter` ensures this by using the ("leaky") Meyers singleton
pattern.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6545
Test Plan: `make asan_check`
Reviewed By: siying
Differential Revision: D20475823
Pulled By: ltamasi
fbshipit-source-id: fe354c33dd96d9bafc094605462352305449a22a
Summary:
Add timestamp support for MultiGet().
timestamp from readoptions is honored, and timestamps can be returned along with values.
MultiReadRandom perf test (10 minutes) on the same development machine ram drive with the same DB data shows no regression (within marge of error). The test is adapted from https://github.com/facebook/rocksdb/wiki/RocksDB-In-Memory-Workload-Performance-Benchmarks.
base line (commit 17bef7d3a):
multireadrandom : 104.173 micros/op 307167 ops/sec; (5462999 of 5462999 found)
This PR:
multireadrandom : 104.199 micros/op 307095 ops/sec; (5307999 of 5307999 found)
.\db_bench --db=r:\rocksdb.github --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --cache_size=2147483648 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=134217728 --max_bytes_for_level_base=1073741824 --disable_wal=0 --wal_dir=r:\rocksdb.github\WAL_LOG --sync=0 --verify_checksum=1 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --duration=600 --benchmarks=multireadrandom --use_existing_db=1 --num=25000000 --threads=32 --allow_concurrent_memtable_write=0
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6483
Reviewed By: anand1976
Differential Revision: D20498373
Pulled By: riversand963
fbshipit-source-id: 8505f22bc40fd791bc7dd05e48d7e67c91edb627
Summary:
By supporting direct IO in RandomAccessFileReader::MultiRead, the benefits of parallel IO (IO uring) and direct IO can be combined.
In direct IO mode, read requests are aligned and merged together before being issued to RandomAccessFile::MultiRead, so blocks in the original requests might share the same underlying buffer, the shared buffers are returned in `aligned_bufs`, which is a new parameter of the `MultiRead` API.
For example, suppose alignment requirement for direct IO is 4KB, one request is (offset: 1KB, len: 1KB), another request is (offset: 3KB, len: 1KB), then since they all belong to page (offset: 0, len: 4KB), `MultiRead` only reads the page with direct IO into a buffer on heap, and returns 2 Slices referencing regions in that same buffer. See `random_access_file_reader_test.cc` for more examples.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6446
Test Plan: Added a new test `random_access_file_reader_test.cc`.
Reviewed By: anand1976
Differential Revision: D20097518
Pulled By: cheng-chang
fbshipit-source-id: ca48a8faf9c3af146465c102ef6b266a363e78d1
Summary:
Add sequence_number_ptr to the checkpoint interface to expose the sequence number during taking the checkpoint. The number will be consistent with the seq # in rocksdb log.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5528
Test Plan: make check -j64
Reviewed By: Winger1994
Differential Revision: D16080209
fbshipit-source-id: 6dc3c7680287ee97d673c5e61f89aae1f43e33df
Summary:
Preliminary support for iterator with user timestamp. Current implementation does not consider merge operator and reverse iterator. Auto compaction is also disabled in unit tests.
Create an iterator with timestamp.
```
...
read_opts.timestamp = &ts;
auto* iter = db->NewIterator(read_opts);
// target is key without timestamp.
for (iter->Seek(target); iter->Valid(); iter->Next()) {}
for (iter->SeekToFirst(); iter->Valid(); iter->Next()) {}
delete iter;
read_opts.timestamp = &ts1;
// lower_bound and upper_bound are without timestamp.
read_opts.iterate_lower_bound = &lower_bound;
read_opts.iterate_upper_bound = &upper_bound;
auto* iter1 = db->NewIterator(read_opts);
// Do Seek or SeekToFirst()
delete iter1;
```
Test plan (dev server)
```
$make check
```
Simple benchmarking (dev server)
1. The overhead introduced by this PR even when timestamp is disabled.
key size: 16 bytes
value size: 100 bytes
Entries: 1000000
Data reside in main memory, and try to stress iterator.
Repeated three times on master and this PR.
- Seek without next
```
./db_bench -db=/dev/shm/rocksdbtest-1000 -benchmarks=fillseq,seekrandom -enable_pipelined_write=false -disable_wal=true -format_version=3
```
master: 159047.0 ops/sec
this PR: 158922.3 ops/sec (2% drop in throughput)
- Seek and next 10 times
```
./db_bench -db=/dev/shm/rocksdbtest-1000 -benchmarks=fillseq,seekrandom -enable_pipelined_write=false -disable_wal=true -format_version=3 -seek_nexts=10
```
master: 109539.3 ops/sec
this PR: 107519.7 ops/sec (2% drop in throughput)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6255
Differential Revision: D19438227
Pulled By: riversand963
fbshipit-source-id: b66b4979486f8474619f4aa6bdd88598870b0746
Summary:
In direct IO mode, RandomAccessFileReader::Read allocates an internal aligned buffer, and then copies the result into the scratch buffer. If the result is only temporarily used inside a function, there is no need to do the memcpy and just let the result Slice refer to the internally allocated buffer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6455
Test Plan: make check
Differential Revision: D20106753
Pulled By: cheng-chang
fbshipit-source-id: 44f505843837bba47a56e3fa2c4dd3bd76486b58
Summary:
In most places in the code the variable names are spelled correctly as
COMMITTED but in a couple places not. This fixes them and ensures the
variable is always called COMMITTED everywhere.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6481
Differential Revision: D20306776
Pulled By: pdillinger
fbshipit-source-id: b6c1bfe41db559b4bc6955c530934460c07f7022
Summary:
Added new Get() methods that return timestamp. Dummy implementation is given so that classes derived from DB don't need to be touched to provide their implementation. MultiGet is not included.
ReadRandom perf test (10 minutes) on the same development machine ram drive with the same DB data shows no regression (within marge of error). The test is adapted from https://github.com/facebook/rocksdb/wiki/RocksDB-In-Memory-Workload-Performance-Benchmarks.
base line (commit 72ee067b9):
101.712 micros/op 314602 ops/sec; 36.0 MB/s (5658999 of 5658999 found)
This PR:
100.288 micros/op 319071 ops/sec; 36.5 MB/s (5674999 of 5674999 found)
./db_bench --db=r:\rocksdb.github --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --cache_size=2147483648 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=134217728 --max_bytes_for_level_base=1073741824 --disable_wal=0 --wal_dir=r:\rocksdb.github\WAL_LOG --sync=0 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --duration=600 --benchmarks=readrandom --use_existing_db=1 --num=25000000 --threads=32
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6409
Differential Revision: D20200086
Pulled By: riversand963
fbshipit-source-id: 490edd74d924f62bd8ae9c29c2a6bbbb8410ca50
Summary:
Today `WriteUnpreparedTxn::RollbackInternal` will write the rollback batch assuming that there is only a single subbatch. However, because untracked_keys_ are currently not deduplicated, it's possible for duplicate keys to exist, and thus split the batch. Also, tracked_keys_ also does not support compators outside of the bytewise comparators, so it's possible for duplicates to occur there as well.
To solve this, just pass in the correct subbatch count.
Also, removed `WriteUnpreparedRollbackPreReleaseCallback` to unify the Commit/Rollback codepaths some more.
Also, fixed a bug in `CommitInternal` where if 1. two_write_queue is true and 2. include_data is true, then `WriteUnpreparedCommitEntryPreReleaseCallback` ends up calling `AddCommitted` on the commit time write batch a second time on the second write. To fix, `WriteUnpreparedCommitEntryPreReleaseCallback` is re-initialized.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6463
Differential Revision: D20150153
Pulled By: lth
fbshipit-source-id: df0b42d39406c75af73df995aa1138f0db539cd1
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
For write unprepared, some applications may bypass the transaction api, and write keys directly into the write batch. However, since they are not tracked, rollbacks (both for savepoint and transaction) are not aware that these keys have to be rolled back.
The fix is to track them in `WriteUnpreparedTxn::untracked_keys_`. This is populated whenever we flush unprepared batches into the DB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6404
Differential Revision: D19842023
Pulled By: lth
fbshipit-source-id: a9edfc643d5c905fc89da9a9a9094d30c9b70108
Summary:
I create a new branch from the branch new upsteram/master and "git merge --squash".
Maybe it will fix everything.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6420
Differential Revision: D19897152
Pulled By: zhichao-cao
fbshipit-source-id: 6575d9e3b23e360f42ee1480b43028b5fcc20136
Summary:
Unfortunately, it seems like mysqld reuses xids across machine restarts. When that happens, we could have something like the following happening:
```
BEGIN_PREPARE(unprepared) Put(a) END_PREPARE(xid = 1)
-- crash and recover with Put(a) rolled back as it was not prepared
BEGIN_PREPARE(prepared) Put(b) END_PREPARE(xid = 1)
COMMIT(xid = 1)
-- crash and recover with both a, b
```
To solve this, we will have to log the rollback batch into the WAL during recovery.
WritePrepared already logs the rollback batch into the WAL, if a rollback happens after prepare, so there is no problem there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6418
Differential Revision: D19896151
Pulled By: lth
fbshipit-source-id: 2ff65ddc5fe75efd57736fed4b7cd7a109d26609
Summary:
A recent fix related to 2pc https://github.com/facebook/rocksdb/pull/6313/ writes something to WAL, but does not flush or sync. This causes assertion failure "impl->TEST_WALBufferIsEmpty()" if manual_wal_flush = true. We should fsync the entry to make sure a second power reset can recover.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6417
Test Plan: Add manual_wal_flush=true case in TransactionTest.DoubleCrashInRecovery and fix a bug in the test so that the bug can be reproduced. It passes with the fix.
Differential Revision: D19894537
fbshipit-source-id: f1e84e49e2269f583c6019743118292cd8b6598e
Summary:
to adapt the change in ceph upstream where the bufferlist::copy() method
was removed in
c724369010
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6395
Differential Revision: D19816815
Pulled By: zhichao-cao
fbshipit-source-id: 9210767b91af0ecdcf5dfaa3e70edcaeea55135f
Summary:
Right, when reading from option files, no readahead is used and 8KB buffer is used. It might introduce high latency if the file system provide high latency and doesn't do readahead. Instead, introduce a readahead to the file. When calling inside DB, infer the value from options.log_readahead. Otherwise, a default 512KB readahead size is used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6372
Test Plan: Add --log_readahead_size in db_bench. Run it with several options and observe read size from option files using strace.
Differential Revision: D19727739
fbshipit-source-id: e6d8053b0a64259abc087f1f388b9cd66fa8a583
Summary:
BlobDB keeps track of the mapping between SSTs and blob files using
the `OnFlushCompleted` and `OnCompactionCompleted` callbacks of
the `EventListener` interface: upon receiving a flush notification, a link
is added between the newly flushed SST and the corresponding blob file;
for compactions, links are removed for the inputs and added for the outputs.
The earlier code performed this link deletion and addition even for
trivially moved files; the new code walks through the two lists together
(in a fashion that's similar to merge sort) and skips such files.
This should mitigate https://github.com/facebook/rocksdb/issues/6338,
wherein an assertion is triggered with the earlier code when a compaction
notification for a trivial move precedes the flush notification for the
moved SST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6381
Test Plan: make check
Differential Revision: D19773729
Pulled By: ltamasi
fbshipit-source-id: ae0f273ded061110dd9334e8fb99b0d7786650b0
Summary:
Unit test names, together with other components, are used to create log files
during some internal testing. Overly long names cause infra failure due to file
names being too long.
Look for internal tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6352
Differential Revision: D19649307
Pulled By: riversand963
fbshipit-source-id: 6f29de096e33c0eaa87d9c8702f810eda50059e7
Summary:
The patch adds statistics support to the new BlobDB garbage collection implementation;
namely, it adds support for the following (pre-existing) tickers:
`BLOB_DB_GC_NUM_FILES`: the number of blob files obsoleted by the GC logic.
`BLOB_DB_GC_NUM_NEW_FILES`: the number of new blob files generated by the GC logic.
`BLOB_DB_GC_FAILURES`: the number of failed GC passes (where a GC pass is
equivalent to a (sub)compaction).
`BLOB_DB_GC_NUM_KEYS_RELOCATED`: the number of blobs relocated to new blob
files by the GC logic.
`BLOB_DB_GC_BYTES_RELOCATED`: the total size of blobs relocated to new blob files.
The tickers `BLOB_DB_GC_NUM_KEYS_OVERWRITTEN`, `BLOB_DB_GC_NUM_KEYS_EXPIRED`,
`BLOB_DB_GC_BYTES_OVERWRITTEN`, `BLOB_DB_GC_BYTES_EXPIRED`, and
`BLOB_DB_GC_MICROS` are not relevant for the new GC logic, and are thus marked
deprecated.
The patch also adds a couple of log messages that log the number and total size of
blobs encountered and relocated during a GC pass, as well as the number of blob
files created and obsoleted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6296
Test Plan: Extended unit tests and used the BlobDB mode of `db_bench`.
Differential Revision: D19402513
Pulled By: ltamasi
fbshipit-source-id: d53d2bfbf4928a1db1e9346c67ebb9007b8932ec
Summary:
In WritePrepared there could be gap in sequence numbers. This breaks the trick we use in kPointInTimeRecovery which assume the first seq in the log right after the corrupted log is one larger than the last seq we read from the logs. To let this trick keep working, we add a dummy entry with the expected sequence to the first log right after recovery.
Also in WriteCommitted, if the log right after the corrupted log is empty, since it has no sequence number to let the sequential trick work, it is assumed as unexpected behavior. This is however expected to happen if we close the db after recovering from a corruption and before writing anything new to it. To remedy that, we apply the same technique by writing a dummy entry to the log that is created after the corrupted log.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6313
Differential Revision: D19458291
Pulled By: maysamyabandeh
fbshipit-source-id: 09bc49e574690085df45b034ca863ff315937e2d
Summary:
This is a simple edit to have two #include file paths be consistent within range_del_aggregator.{h,cc} with everywhere else.
The impact of this inconsistency is that it actual breaks a Bazel based build on the Windows platform. The same pragma once failure occurs with both Windows Visual C++ 2019 and clang for Windows 9.0. Bazel's "sandboxing" of the builds causes both compilers to not properly recognize "rocksdb/types.h" and "include/rocksdb/types.h" to be the same file (also comparator.h). My guess is that the backslash versus forward slash mixing within path names is the underlying issue.
But, everything builds fine once the include paths in these two source files are consistent with the rest of the repository.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6321
Differential Revision: D19506585
Pulled By: ltamasi
fbshipit-source-id: 294c346607edc433ab99eaabc9c880ee7426817a
Summary:
In addition to removing the earlier partially implemented garbage collection
logic from the BlobDB codebase, the patch also removes the test cases (as well as
the related sync points, as appropriate) that were only relevant for the old
implementation, and reworks the remaining ones so they use the new GC logic.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6278
Test Plan: `make check`
Differential Revision: D19335226
Pulled By: ltamasi
fbshipit-source-id: 0cc1794bc9892feda1426ed5522a318f3cb1b692
Summary:
unordered_write is incompatible with non-zero max_successive_merges. Although we check this at runtime, we currently don't prevent the user from setting this combination in options. This has led to stress tests to fail with this combination is tried in ::SetOptions.
The patch fixes that and also reverts the changes performed by https://github.com/facebook/rocksdb/pull/6254, in which max_successive_merges was mistakenly declared incompatible with unordered_write.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6284
Differential Revision: D19356115
Pulled By: maysamyabandeh
fbshipit-source-id: f06dadec777622bd75f267361c022735cf8cecb6
Summary:
Some shadow warning shows up when using gcc 4.8. An example:
./utilities/blob_db/blob_compaction_filter.h: In constructor ‘rocksdb::blob_db::BlobIndexCompactionFilterFactoryBase::BlobIndexCompactionFilterFactoryBase(rocksdb::blob_db::lobDBImpl*, rocksdb::Env*, rocksdb::Statistics*)’:
./utilities/blob_db/blob_compaction_filter.h:121:7: error: declaration of ‘blob_db_impl’ shadows a member of 'this' [-Werror=shadow]
: blob_db_impl_(blob_db_impl), env_(_env), statistics_(_statistics) {}
^
Fix them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6242
Test Plan: Build and see the warnings go away.
Differential Revision: D19217789
fbshipit-source-id: 8ef631941f23dab47a388e060adec24b72efd65e
Summary:
WritePreparedTxnDB calls CancelAllBackgroundWork in its destructor to avoid dangling references to it from background job's SnapshotChecker callback. However, if the DBImpl is already closed, the info log might be closed with it, which causes memory leak when CancelAllBackgroundWork tries to print to the info log. The patch fixes that by calling CancelAllBackgroundWork only if the db is not closed already.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6268
Differential Revision: D19303439
Pulled By: maysamyabandeh
fbshipit-source-id: 4228a6be7e78d43c90630347baa89b008200bd15
Summary:
This is a continuation of https://github.com/facebook/rocksdb/pull/5320/files
I open a new mr for these purposes, half a year has past since the old mr is posted so it's almost impossible to fulfill some points below on the old mr, especially 5)
1) add validation modes for optimistic txns
2) modify unittests to test both modes
3) make format
4) refine hash functor
5) push to master
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6240
Differential Revision: D19301296
fbshipit-source-id: 5b5b3cbd39558f43947f7d2dec6cd31a06386edb
Summary:
allow_concurrent_memtable_write is incompatible with non-zero max_successive_merges. Although we check this at runtime, we currently don't prevent the user from setting this combination in options. This has led to stress tests to fail with this combination is tried in ::SetOptions. The patch fixes that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6254
Differential Revision: D19265819
Pulled By: maysamyabandeh
fbshipit-source-id: 47f2e2dc26fe0972c7152f4da15dadb9703f1179
Summary:
BlobDB currently only supports using the default column family. The earlier
code enforces this by comparing the `ColumnFamilyHandle` passed to the
`Get`/`Put`/etc. call with the handle returned by `DefaultColumnFamily`
(which, at the end of the day, comes from `DBImpl::default_cf_handle_`).
Since other `ColumnFamilyHandle`s can also point to the default column
family, this can reject legitimate requests as well. (As an example,
with the earlier code, the handle returned by `BlobDB::Open` cannot
actually be used in API calls.) The patch fixes this by comparing only
the IDs of the column family handles instead of the pointers themselves.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6226
Test Plan: `make check`
Differential Revision: D19187461
Pulled By: ltamasi
fbshipit-source-id: 54ce2e12ebb1f07e6d1e70e3b1e0213dfa94bda2
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/6192
Test Plan:
Add a unit test that fails without the fix and passes now
make check
Differential Revision: D19124781
Pulled By: anand1976
fbshipit-source-id: 8c8cb6fa16c3fc23ec011e168561a13f76bbd783
Summary:
Periodic compactions ensure that even SSTs that do not get picked up
otherwise eventually go through compaction; used in conjunction with
BlobDB's garbage collection, they enable BlobDB to reclaim space when
old blob files are used by such straggling SSTs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6172
Test Plan: Ran `make check` and used the BlobDB mode of `db_bench`.
Differential Revision: D19045045
Pulled By: ltamasi
fbshipit-source-id: 04636ecc4b6cfe8d495bf656faa65d54a5eb1a93
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
Summary:
The patch adds logic that relocates live blobs from the oldest N non-TTL
blob files as they are encountered during compaction (assuming the BlobDB
configuration option `enable_garbage_collection` is `true`), where N is defined
as the number of immutable non-TTL blob files multiplied by the value of
a new BlobDB configuration option called `garbage_collection_cutoff`.
(The default value of this parameter is 0.25, that is, by default the valid blobs
residing in the oldest 25% of immutable non-TTL blob files are relocated.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6121
Test Plan: Added unit test and tested using the BlobDB mode of `db_bench`.
Differential Revision: D18785357
Pulled By: ltamasi
fbshipit-source-id: 8c21c512a18fba777ec28765c88682bb1a5e694e
Summary:
**NOTE**: this also needs to be back-ported to 6.4.6 and possibly older branches if further releases from them is envisaged.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6081
Differential Revision: D18710107
Pulled By: zhichao-cao
fbshipit-source-id: 03260f9316566e2bfc12c7d702d6338bb7941e01
Summary:
This patch factors out the logic that reads a (potentially compressed) blob
from a file into a separate helper method `GetRawBlobFromFile`, and cleans
up the code a bit. Also, errors during decompression are now logged/propagated
to the user by returning a `Status` code of `Corruption`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6093
Test Plan: `make check`
Differential Revision: D18716673
Pulled By: ltamasi
fbshipit-source-id: 44144bc064cab616862d5643f34384f2bae6eb78
Summary:
The patch refactors and cleans up the logic around creating new blob files
by moving the common code of `SelectBlobFile` and `SelectBlobFileTTL`
to a new helper method `CreateBlobFileAndWriter`, bringing the implementation
of `SelectBlobFile` and `SelectBlobFileTTL` into sync, and increasing encapsulation
by adding new constructors for `BlobFile` and `BlobLogHeader`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6066
Test Plan:
Ran `make check` and used the BlobDB mode of `db_bench` to sanity test both
the TTL and the non-TTL code paths.
Differential Revision: D18646921
Pulled By: ltamasi
fbshipit-source-id: e5705a84807932e31dccab4f49b3e64369cea26d
Summary:
This change ignores the value of BackupableDBOptions::max_valid_backups_to_open when a BackupEngine is not read-only.
Issue: https://github.com/facebook/rocksdb/issues/4997
Note on tests: I had to remove test case WriteOnlyEngine of BackupableDBTest because it was not consistent with the new semantic of BackupableDBOptions::max_valid_backups_to_open. Maybe, we should think about adding a new interface for append-only BackupEngines. On the other hand, I changed LimitBackupsOpened test case to use a read-only BackupEngine, and I added a new specific test case for the change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6072
Reviewed By: pdillinger
Differential Revision: D18687364
Pulled By: sebastianopeluso
fbshipit-source-id: 77bc1f927d623964d59137a93de123bbd719da4e
Summary:
The patch adds logic to mark no longer needed blob files obsolete upon database open
and whenever a flush or compaction completes. Unneeded blob files are detected by
iterating through live immutable non-TTL blob files starting from the lowest-numbered one,
and stopping when a blob file used by any SSTs or potentially used by memtables is found.
(The latter is determined by comparing the sequence number at which the blob file
became immutable with the largest sequence number received in flush notifications.)
In addition, the patch cleans up the logic around closing and obsoleting blob files and
enforces invariants around this area (blob files are now guaranteed to go through the
stages mutable-non-obsolete, immutable-non-obsolete, and immutable-obsolete in this
order).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6032
Test Plan: Extended unit tests and tested using the BlobDB mode of `db_bench`.
Differential Revision: D18495610
Pulled By: ltamasi
fbshipit-source-id: 11825b84af74f3f4abfd9bcae04e80870ae58961
Summary:
SmallestUnCommittedSeq sometimes takes too long when run under Valgrind. The patch disables it when the tests are run under Valgrind.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6035
Differential Revision: D18509198
Pulled By: maysamyabandeh
fbshipit-source-id: 1191443b9fedb6b9c50d6b76f5c92371f5030230
Summary:
Production:
* Fixes GarbageCollect (and auto-GC triggered by PurgeOldBackups, DeleteBackup, or CreateNewBackup) to clean up backup directory independent of current settings (except max_valid_backups_to_open; see issue https://github.com/facebook/rocksdb/issues/4997) and prior settings used with same backup directory.
* Fixes GarbageCollect (and auto-GC) not to attempt to remove "." and ".." entries from directories.
* Clarifies contract with users in modifying BackupEngine operations. In short, leftovers from any incomplete operation are cleaned up by any subsequent call to that same kind of operation (PurgeOldBackups and DeleteBackup considered the same kind of operation). GarbageCollect is available to clean up after all kinds. (NB: right now PurgeOldBackups and DeleteBackup will clean up after incomplete CreateNewBackup, but we aren't promising to continue that behavior.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6023
Test Plan:
* Refactors open parameters to use an option enum, for readability, etc. (Also fixes an unused parameter bug in the redundant OpenDBAndBackupEngineShareWithChecksum.)
* Fixes an apparent bug in ShareTableFilesWithChecksumsTransition in which old backup data was destroyed in the transition to be tested. That test is now augmented to ensure GarbageCollect (or auto-GC) does not remove shared files when BackupEngine is opened with share_table_files=false.
* Augments DeleteTmpFiles test to ensure that CreateNewBackup does auto-GC when an incompletely created backup is detected.
Differential Revision: D18453559
Pulled By: pdillinger
fbshipit-source-id: 5e54e7b08d711b161bc9c656181012b69a8feac4
Summary:
Add a new API that allows a user to call MultiGet specifying multiple keys belonging to different column families. This is mainly useful for users who want to do a consistent read of keys across column families, with the added performance benefits of batching and returning values using PinnableSlice.
As part of this change, the code in the original multi-column family MultiGet for acquiring the super versions has been refactored into a separate function that can be used by both, the batching and the non-batching versions of MultiGet.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5816
Test Plan:
make check
make asan_check
asan_crash_test
Differential Revision: D18408676
Pulled By: anand1976
fbshipit-source-id: 933e7bec91dd70e7b633be4ff623a1116cc28c8d
Summary:
The patch adds logic to BlobDB to maintain the mapping between blob files
and SSTs for which the blob file in question is the oldest blob file referenced
by the SST file. The mapping is initialized during database open based on the
information retrieved using `GetLiveFilesMetaData`, and updated after
flushes/compactions based on the information received through the `EventListener`
interface (or, in the case of manual compactions issued through the `CompactFiles`
API, the `CompactionJobInfo` object).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6020
Test Plan: Added a unit test; also tested using the BlobDB mode of `db_bench`.
Differential Revision: D18410508
Pulled By: ltamasi
fbshipit-source-id: dd9e778af781cfdb0d7056298c54ba9cebdd54a5
Summary:
Only if there is a crash, power failure, or I/O error in
DeleteBackup, shared or private files from the backup might be left
behind that are not cleaned up by PurgeOldBackups or DeleteBackup-- only
by GarbageCollect. This makes the BackupEngine API "leaky by default."
Even if it means a modest performance hit, I think we should make
Delete and Purge do as they say, with ongoing best effort: i.e. future
calls will attempt to finish any incomplete work from earlier calls.
This change does that by having DeleteBackup and PurgeOldBackups do a
GarbageCollect, unless (to minimize performance hit) this BackupEngine
has already done a GarbageCollect and there have been no
deletion-related I/O errors in that GarbageCollect or since then.
Rejected alternative 1: remove meta file last instead of first. This would in theory turn partially deleted backups into corrupted backups, but code changes would be needed to allow the missing files and consider it acceptably corrupt, rather than failing to open the BackupEngine. This might be a reasonable choice, but I mostly rejected it because it doesn't solve the legacy problem of cleaning up existing lingering files.
Rejected alternative 2: use a deletion marker file. If deletion started with creating a file that marks a backup as flagged for deletion, then we could reliably detect partially deleted backups and efficiently finish removing them. In addition to not solving the legacy problem, this could be precarious if there's a disk full situation, and we try to create a new file in order to delete some files. Ugh.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6015
Test Plan: Updated unit tests
Differential Revision: D18401333
Pulled By: pdillinger
fbshipit-source-id: 12944e372ce6809f3f5a4c416c3b321a8927d925
Summary:
The patch exposes the file numbers of the SSTs as well as the oldest blob
files they contain a reference to through the GetColumnFamilyMetaData/
GetLiveFilesMetaData interface.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6011
Test Plan:
Fixed and extended the existing unit tests. (The earlier ColumnFamilyMetaDataTest
wasn't really testing anything because the generated memtables were never
flushed, so the metadata structure was essentially empty.)
Differential Revision: D18361697
Pulled By: ltamasi
fbshipit-source-id: d5ed1d94ac70858b84393c48711441ddfe1251e9
Summary:
According to
https://github.com/facebook/rocksdb/wiki/Rocksdb-BlockBasedTable-Format,
the block read by BlockBasedTable::ReadMetaBlock is actually the meta index
block. Therefore, it is better to rename the function to ReadMetaIndexBlock.
This PR also applies some format change to existing code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6009
Test Plan: make check
Differential Revision: D18333238
Pulled By: riversand963
fbshipit-source-id: 2c4340a29b3edba53d19c132cbfd04caf6242aed
Summary:
For MDEV-19670: MyRocks: key lookups into deleted data are very slow
BaseDeltaIterator remembers iterate_upper_bound and will not let delta_iterator_
walk above the iterate_upper_bound if base_iterator_ is not valid
anymore.
== Rationale ==
The most straightforward way would be to make the delta_iterator
(which is a rocksdb::WBWIIterator) to support iterator bounds. But
checking for bounds has an extra CPU overhead.
So we put the check into BaseDeltaIterator, and only make it when
base_iterator_ is not valid.
(note: We could take it even further, and move the check a few lines
down, and only check iterator bounds ourselves if base_iterator_ is
not valid AND delta_iterator_ hit a tombstone).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5403
Differential Revision: D15863092
Pulled By: maysamyabandeh
fbshipit-source-id: 8da458e7b9af95ff49356666f69664b4a6ccf49b
Summary:
MaxCatchupWithNewSnapshot tests that the snapshot sequence number will be larger than the max sequence number when the snapshot was taken. However since the test does not have access to the max sequence number when the snapshot was taken, it uses max sequence number after that, which could have advanced the snapshot by then, thus making the test flaky.
The fix is to compare with max sequence number before the snapshot was taken, which is a lower bound for the value when the snapshot was taken.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5850
Test Plan: ~/gtest-parallel/gtest-parallel --repeat=12800 ./write_prepared_transaction_test --gtest_filter="*MaxCatchupWithNewSnapshot*"
Differential Revision: D17608926
Pulled By: maysamyabandeh
fbshipit-source-id: b122ae5a27f982b290bd60da852e28d3c5eb0136
Summary:
- Periodic compactions are auto-enabled if a compaction filter or a compaction filter factory is set, in Level Compaction.
- The default value of `periodic_compaction_seconds` is changed to UINT64_MAX, which lets RocksDB auto-tune periodic compactions as needed. An explicit value of 0 will still work as before ie. to disable periodic compactions completely. For now, on seeing a compaction filter along with a UINT64_MAX value for `periodic_compaction_seconds`, RocksDB will make SST files older than 30 days to go through periodic copmactions.
Some RocksDB users make use of compaction filters to control when their data can be deleted, usually with a custom TTL logic. But it is occasionally possible that the compactions get delayed by considerable time due to factors like low writes to a key range, data reaching bottom level, etc before the TTL expiry. Periodic Compactions feature was originally built to help such cases. Now periodic compactions are auto enabled by default when compaction filters or compaction filter factories are used, as it is generally helpful to all cases to collect garbage.
`periodic_compaction_seconds` is set to a large value, 30 days, in `SanitizeOptions` when RocksDB sees that a `compaction_filter` or `compaction_filter_factory` is used.
This is done only for Level Compaction style.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5865
Test Plan:
- Added a new test `DBCompactionTest.LevelPeriodicCompactionWithCompactionFilters` to make sure that `periodic_compaction_seconds` is set if either `compaction_filter` or `compaction_filter_factory` options are set.
- `COMPILE_WITH_ASAN=1 make check`
Differential Revision: D17659180
Pulled By: sagar0
fbshipit-source-id: 4887b9cf2e53cf2dc93a7b658c6b15e1181217ee
Summary:
- Updated our included xxhash implementation to version 0.7.2 (== the latest dev version as of 2019-10-09).
- Using XXH_NAMESPACE (like other fb projects) to avoid potential name collisions.
- Added fastrange64, and unit tests for it and fastrange32. These are faster alternatives to hash % range.
- Use preview version of XXH3 instead of MurmurHash64A for NPHash64
-- Had to update cache_test to increase probability of passing for any given hash function.
- Use fastrange64 instead of % with uses of NPHash64
-- Had to fix WritePreparedTransactionTest.CommitOfDelayedPrepared to avoid deadlock apparently caused by new hash collision.
- Set default seed for NPHash64 because specifying a seed rarely makes sense for it.
- Removed unnecessary include xxhash.h in a popular .h file
- Rename preview version of XXH3 to XXH3p for clarity and to ease backward compatibility in case final version of XXH3 is integrated.
Relying on existing unit tests for NPHash64-related changes. Each new implementation of fastrange64 passed unit tests when manipulating my local build to select it. I haven't done any integration performance tests, but I consider the improved performance of the pieces being swapped in to be well established.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5909
Differential Revision: D18125196
Pulled By: pdillinger
fbshipit-source-id: f6bf83d49d20cbb2549926adf454fd035f0ecc0d
Summary:
Since we do not evict a file's blocks from block cache before that file
is deleted, we require a file's cache ID prefix is both unique and
non-reusable. However, the Windows functionality we were relying on only
guaranteed uniqueness. That meant a newly created file could be assigned
the same cache ID prefix as a deleted file. If the newly created file
had block offsets matching the deleted file, full cache keys could be
exactly the same, resulting in obsolete data blocks returned from cache
when trying to read from the new file.
We noticed this when running on FAT32 where compaction was writing out
of order keys due to reading obsolete blocks from its input files. The
functionality is documented as behaving the same on NTFS, although I
wasn't able to repro it there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5844
Test Plan:
we had a reliable repro of out-of-order keys on FAT32 that
was fixed by this change
Differential Revision: D17752442
fbshipit-source-id: 95d983f9196cf415f269e19293b97341edbf7e00
Summary:
This PR eliminates repeated lookups in associative or ordered containers when a single lookup suffices.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5875
Differential Revision: D17753172
Pulled By: anand1976
fbshipit-source-id: 796b02b760082521d8c42a1cb65a76bf0e6c1b8e
Summary:
Further apply formatter to more recent commits.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5830
Test Plan: Run all existing tests.
Differential Revision: D17488031
fbshipit-source-id: 137458fd94d56dd271b8b40c522b03036943a2ab
Summary:
Some recent commits might not have passed through the formatter. I formatted recent 45 commits. The script hangs for more commits so I stopped there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5827
Test Plan: Run all existing tests.
Differential Revision: D17483727
fbshipit-source-id: af23113ee63015d8a43d89a3bc2c1056189afe8f
Summary:
clang-analyzer has uncovered a bunch of places where the code is relying
on pointers being valid and one case (in VectorIterator) where a moved-from
object is being used:
In file included from db/range_tombstone_fragmenter.cc:17:
./util/vector_iterator.h:23:18: warning: Method called on moved-from object 'keys' of type 'std::vector'
current_(keys.size()) {
^~~~~~~~~~~
1 warning generated.
utilities/persistent_cache/block_cache_tier_file.cc:39:14: warning: Called C++ object pointer is null
Status s = env->NewRandomAccessFile(filepath, file, opt);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
utilities/persistent_cache/block_cache_tier_file.cc:47:19: warning: Called C++ object pointer is null
Status status = env_->GetFileSize(Path(), size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
utilities/persistent_cache/block_cache_tier_file.cc:290:14: warning: Called C++ object pointer is null
Status s = env_->FileExists(Path());
^~~~~~~~~~~~~~~~~~~~~~~~
utilities/persistent_cache/block_cache_tier_file.cc:363:35: warning: Called C++ object pointer is null
CacheWriteBuffer* const buf = alloc_->Allocate();
^~~~~~~~~~~~~~~~~~
utilities/persistent_cache/block_cache_tier_file.cc:399:41: warning: Called C++ object pointer is null
const uint64_t file_off = buf_doff_ * alloc_->BufferSize();
^~~~~~~~~~~~~~~~~~~~
utilities/persistent_cache/block_cache_tier_file.cc:463:33: warning: Called C++ object pointer is null
size_t start_idx = lba.off_ / alloc_->BufferSize();
^~~~~~~~~~~~~~~~~~~~
utilities/persistent_cache/block_cache_tier_file.cc:515:5: warning: Called C++ object pointer is null
alloc_->Deallocate(bufs_[i]);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
7 warnings generated.
ar: creating librocksdb_debug.a
utilities/memory/memory_test.cc:68:25: warning: Called C++ object pointer is null
cache_set->insert(db->GetDBOptions().row_cache.get());
^~~~~~~~~~~~~~~~~~
1 warning generated.
The patch fixes these by adding assertions and explicitly passing in zero
when initializing VectorIterator::current_ (which preserves the existing
behavior).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5821
Test Plan: Ran make check and make analyze to make sure the warnings have disappeared.
Differential Revision: D17455949
Pulled By: ltamasi
fbshipit-source-id: 363619618ea649a0674287f9f3b3393e390571ee
Summary:
For our default block cache, each additional entry has extra memory overhead. It include LRUHandle (72 bytes currently) and the cache key (two varint64, file id and offset). The usage is not negligible. For example for block_size=4k, the overhead accounts for an extra 2% memory usage for the cache. The patch charging the cache for the extra usage, reducing untracked memory usage outside block cache. The feature is enabled by default and can be disabled by passing kDontChargeCacheMetadata to the cache constructor.
This PR builds up on https://github.com/facebook/rocksdb/issues/4258
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5797
Test Plan:
- Existing tests are updated to either disable the feature when the test has too much dependency on the old way of accounting the usage or increasing the cache capacity to account for the additional charge of metadata.
- The Usage tests in cache_test.cc are augmented to test the cache usage under kFullChargeCacheMetadata.
Differential Revision: D17396833
Pulled By: maysamyabandeh
fbshipit-source-id: 7684ccb9f8a40ca595e4f5efcdb03623afea0c6f
Summary:
file_reader_writer.h and .cc contain several files and helper function, and it's hard to navigate. Separate it to multiple files and put them under file/
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5803
Test Plan: Build whole project using make and cmake.
Differential Revision: D17374550
fbshipit-source-id: 10efca907721e7a78ed25bbf74dc5410dea05987
Summary:
Move definition and implementation for ArenaWrappedDBIter into its own .h/.cc files. Also, change inlining of functions to better comply with the Google C++ style guide.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5801
Test Plan: make check
Differential Revision: D17371012
Pulled By: anand1976
fbshipit-source-id: c1361abc2851575111e357a63d88be3b3d6cb341
Summary:
Use delete to disable automatic generated methods instead of private, and put the constructor together for more clear.This modification cause the unused field warning, so add unused attribute to disable this warning.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5009
Differential Revision: D17288733
fbshipit-source-id: 8a767ce096f185f1db01bd28fc88fef1cdd921f3
Summary:
ReadYourOwnWriteStress occasionally times out on some platforms. The patch splits it to three.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5776
Differential Revision: D17231743
Pulled By: maysamyabandeh
fbshipit-source-id: d42eeaf22f61a48d50f9c404d98b1081ae8dac94
Summary:
This avoids rehashing the key in TrackKey() in case the key is not already
in the map of tracked keys, which will happen at least once per key used in a
transaction.
Additionally fix two typos.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5696
Differential Revision: D17210178
Pulled By: lth
fbshipit-source-id: 7e2c28e9e505c1d1c1535d435250cf2b191a6fdf
Summary:
Iterators reseek to the target key after iterating over max_sequential_skip_in_iterations invalid values. The logic is susceptible to an infinite loop bug, which has been present with WritePrepared Transactions up until 6.2 release. Although the bug is not present on master, the patch adds a unit test to prevent it from resurfacing again.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5727
Differential Revision: D16952759
Pulled By: maysamyabandeh
fbshipit-source-id: d0d973dddc8dfabd5a794931232aa4c862c74f51
Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022
Differential Revision: D14394062
Pulled By: miasantreble
fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
Summary:
In valgrind_test, TransactionTest.GetWithoutSnapshot ran 2 hours and still didn't finish. Black list from valgrind_test to prevent timeout.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5715
Test Plan: run "make valgrind_test" and see whether the test is still generated.
Differential Revision: D16866009
fbshipit-source-id: 92c78049b0bc1c2b9a0dfc1b7c8a9206b36f02f0
Summary:
Fix a bug in write unprepared savepoints. When flushing the write batch according to savepoint boundaries, we were forgetting to flush the last write batch after the last savepoint, meaning that some data was not written to DB.
Also, add a small optimization where we avoid flushing empty batches.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5703
Differential Revision: D16811996
Pulled By: lth
fbshipit-source-id: 600c7e0e520ad7a8fad32d77e11d932453e68e3f
Summary:
Some accesses to blob_files_ and open_ttl_files_ in BlobDBImpl, as well
as to expiration_range_ in BlobFile were not properly synchronized.
The patch fixes this and also makes sure the invariant that obsolete_files_
is a subset of blob_files_ holds even when an attempt to delete an obsolete
blob file fails.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5698
Test Plan:
COMPILE_WITH_TSAN=1 make blob_db_test
gtest-parallel --repeat=1000 ./blob_db_test --gtest_filter="*ShutdownWait*"
The test fails with TSAN errors ~20 times out of 1000 without the patch but
completes successfully 1000 out of 1000 times with the fix.
Differential Revision: D16793235
Pulled By: ltamasi
fbshipit-source-id: 8034b987598d4fdc9f15098d4589cc49cde484e9
Summary:
In MyRocks, there are cases where we write while iterating through keys. This currently breaks WBWIIterator, because if a write batch flushes during iteration, the delta iterator would point to invalid memory.
For now, fix by disallowing flush if there are active iterators. In the future, we will loop through all the iterators on a transaction, and refresh the iterators when a write batch is flushed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5699
Differential Revision: D16794157
Pulled By: lth
fbshipit-source-id: 5d5bf70688bd68fe58e8a766475ae88fd1be3190
Summary:
Fix the following clang analyze failures:
```
In file included from utilities/transactions/transaction_test.cc:8:
./utilities/transactions/transaction_test.h:174:14: warning: Attempt to delete released memory
delete root_db;
^
```
The destructor of StackableDB already deletes the root db and there is no need to delete the db separately.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5700
Test Plan: USE_CLANG=1 TEST_TMPDIR=/dev/shm/rocksdb OPT=-g make -j24 analyze
Differential Revision: D16800579
Pulled By: maysamyabandeh
fbshipit-source-id: 64c2d70f23e07e6a15242add97c744902ea33be5
Summary:
Currently, if a write is done without a snapshot, then `largest_validated_seq_` is set to `kMaxSequenceNumber`. This is too aggressive, because an iterator with a snapshot created after this write should be valid.
Set `largest_validated_seq_` to `GetLastPublishedSequence` instead. The variable means that no keys in the current tracked key set has changed by other transactions since `largest_validated_seq_`.
Also, do some extra cleanup in Clear() for safety.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5697
Differential Revision: D16788613
Pulled By: lth
fbshipit-source-id: f2aa40b8b12e0c0cf9e38c940fecc8f1cc0d2385
Summary:
With changes made in https://github.com/facebook/rocksdb/pull/5664 we meant to pass snap_released parameter of ::IsInSnapshot from the read callbacks. Although the variable was defined, passing it to the callback in WritePreparedTxnReadCallback was missing, which is fixed in this PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5691
Differential Revision: D16767310
Pulled By: maysamyabandeh
fbshipit-source-id: 3bf53f5964a2756a66ceef7c8f6b3ac75f102f48
Summary:
The changes transaction_test to set `txn_db_options.default_write_batch_flush_threshold = 1` in order to give better test coverage for WriteUnprepared.
As part of the change, some tests had to be updated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5658
Differential Revision: D16740468
Pulled By: lth
fbshipit-source-id: 3821eec20baf13917c8c1fab444332f75a509de9
Summary:
SmallestUnCommittedSeq reads two data structures, prepared_txns_ and delayed_prepared_. These two are updated in CheckPreparedAgainstMax when max_evicted_seq_ advances some prepared entires. To avoid the cost of acquiring a mutex, the read from them in SmallestUnCommittedSeq is not atomic. This creates a potential race condition.
The fix is to read the two data structures in the reverse order of their update. CheckPreparedAgainstMax copies the prepared entry to delayed_prepared_ before removing it from prepared_txns_ and SmallestUnCommittedSeq looks into prepared_txns_ before reading delayed_prepared_.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5683
Differential Revision: D16744699
Pulled By: maysamyabandeh
fbshipit-source-id: b1bdb134018beb0b9de58827f512662bea35cad0
Summary:
This PR adds four more eviction policies.
- OPT [1]
- Hyperbolic caching [2]
- ARC [3]
- GreedyDualSize [4]
[1] L. A. Belady. 1966. A Study of Replacement Algorithms for a Virtual-storage Computer. IBM Syst. J. 5, 2 (June 1966), 78-101. DOI=http://dx.doi.org/10.1147/sj.52.0078
[2] Aaron Blankstein, Siddhartha Sen, and Michael J. Freedman. 2017. Hyperbolic caching: flexible caching for web applications. In Proceedings of the 2017 USENIX Conference on Usenix Annual Technical Conference (USENIX ATC '17). USENIX Association, Berkeley, CA, USA, 499-511.
[3] Nimrod Megiddo and Dharmendra S. Modha. 2003. ARC: A Self-Tuning, Low Overhead Replacement Cache. In Proceedings of the 2nd USENIX Conference on File and Storage Technologies (FAST '03). USENIX Association, Berkeley, CA, USA, 115-130.
[4] N. Young. The k-server dual and loose competitiveness for paging. Algorithmica, June 1994, vol. 11,(no.6):525-41. Rewritten version of ''On-line caching as cache size varies'', in The 2nd Annual ACM-SIAM Symposium on Discrete Algorithms, 241-250, 1991.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5644
Differential Revision: D16548817
Pulled By: HaoyuHuang
fbshipit-source-id: 838f76db9179f07911abaab46c97e1c929cfcd63
Summary:
This is a new API added to db.h to allow for fetching all merge operands associated with a Key. The main motivation for this API is to support use cases where doing a full online merge is not necessary as it is performance sensitive. Example use-cases:
1. Update subset of columns and read subset of columns -
Imagine a SQL Table, a row is encoded as a K/V pair (as it is done in MyRocks). If there are many columns and users only updated one of them, we can use merge operator to reduce write amplification. While users only read one or two columns in the read query, this feature can avoid a full merging of the whole row, and save some CPU.
2. Updating very few attributes in a value which is a JSON-like document -
Updating one attribute can be done efficiently using merge operator, while reading back one attribute can be done more efficiently if we don't need to do a full merge.
----------------------------------------------------------------------------------------------------
API :
Status GetMergeOperands(
const ReadOptions& options, ColumnFamilyHandle* column_family,
const Slice& key, PinnableSlice* merge_operands,
GetMergeOperandsOptions* get_merge_operands_options,
int* number_of_operands)
Example usage :
int size = 100;
int number_of_operands = 0;
std::vector<PinnableSlice> values(size);
GetMergeOperandsOptions merge_operands_info;
db_->GetMergeOperands(ReadOptions(), db_->DefaultColumnFamily(), "k1", values.data(), merge_operands_info, &number_of_operands);
Description :
Returns all the merge operands corresponding to the key. If the number of merge operands in DB is greater than merge_operands_options.expected_max_number_of_operands no merge operands are returned and status is Incomplete. Merge operands returned are in the order of insertion.
merge_operands-> Points to an array of at-least merge_operands_options.expected_max_number_of_operands and the caller is responsible for allocating it. If the status returned is Incomplete then number_of_operands will contain the total number of merge operands found in DB for key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5604
Test Plan:
Added unit test and perf test in db_bench that can be run using the command:
./db_bench -benchmarks=getmergeoperands --merge_operator=sortlist
Differential Revision: D16657366
Pulled By: vjnadimpalli
fbshipit-source-id: 0faadd752351745224ee12d4ae9ef3cb529951bf
Summary:
if read_options.snapshot is not set, ::Get will take the last sequence number after taking a super-version and uses that as the sequence number. Theoretically max_eviceted_seq_ could advance this sequence number. This could lead ::IsInSnapshot that will be invoked by the ReadCallback to notice the absence of the snapshot. In this case, the ReadCallback should have passed a non-value to snap_released so that it could be set by the ::IsInSnapshot. The patch does that, and adds a unit test to verify it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5664
Differential Revision: D16614033
Pulled By: maysamyabandeh
fbshipit-source-id: 06fb3fd4aacd75806ed1a1acec7961f5d02486f2
Summary:
It sometimes times out when run under valgrind taking around 20m. The patch skips the test under Valgrind.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5671
Differential Revision: D16652382
Pulled By: maysamyabandeh
fbshipit-source-id: 0f6f4f76d37337d56226b689e01b14523dd07aae
Summary:
Add savepoint support when the current transaction has flushed unprepared batches.
Rolling back to savepoint is similar to rolling back a transaction. It requires the set of keys that have changed since the savepoint, re-reading the keys at the snapshot at that savepoint, and the restoring the old keys by writing out another unprepared batch.
For this strategy to work though, we must be capable of reading keys at a savepoint. This does not work if keys were written out using the same sequence number before and after a savepoint. Therefore, when we flush out unprepared batches, we must split the batch by savepoint if any savepoints exist.
eg. If we have the following:
```
Put(A)
Put(B)
Put(C)
SetSavePoint()
Put(D)
Put(E)
SetSavePoint()
Put(F)
```
Then we will write out 3 separate unprepared batches:
```
Put(A) 1
Put(B) 1
Put(C) 1
Put(D) 2
Put(E) 2
Put(F) 3
```
This is so that when we rollback to eg. the first savepoint, we can just read keys at snapshot_seq = 1.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5627
Differential Revision: D16584130
Pulled By: lth
fbshipit-source-id: 6d100dd548fb20c4b76661bd0f8a2647e64477fa
Summary:
In DeferSnapshotSavePointTest, writes were failing with snapshot validation error because the key with the latest sequence number was an unprepared key from the current transaction.
Fix this by passing down the correct read callback.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5657
Differential Revision: D16582466
Pulled By: lth
fbshipit-source-id: 11645dac0e7c1374d917ef5fdf757d13c1d1108d
Summary:
The `TransactionTest.MultiGetBatchedTest` were failing with unprepared batches because we were not using the correct callbacks. Override MultiGet to pass down the correct ReadCallback. A similar problem is also fixed in WritePrepared.
This PR also fixes an issue similar to (https://github.com/facebook/rocksdb/pull/5147), but for MultiGet instead of Get.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5634
Differential Revision: D16552674
Pulled By: lth
fbshipit-source-id: 736eaf8e919c6b13d5f5655b1c0d36b57ad04804
Summary:
This PR optimizes the hybrid row-block cache simulator. If a Get request hits the cache, we treat all its future accesses as hits.
Consider a Get request (no snapshot) accesses multiple files, e.g, file1, file2, file3. We construct the row key as "fdnumber_key_0". Before this PR, if it hits the cache when searching the key in file1, we continue to process its accesses in file2 and file3 which is unnecessary.
With this PR, if "file1_key_0" is in the cache, we treat all future accesses of this Get request as hits.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5616
Differential Revision: D16453187
Pulled By: HaoyuHuang
fbshipit-source-id: 56f3169cc322322305baaf5543226a0824fae19f
Summary:
The ssize_t type was introduced in https://github.com/facebook/rocksdb/pull/5633, but it seems like it's a POSIX specific type.
I just need a signed type to represent number of bytes, so use int64_t instead. It seems like we have a typedef from SSIZE_T for Windows, but it doesn't seem like we ever include "port/port.h" in our public header files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5638
Differential Revision: D16526269
Pulled By: lth
fbshipit-source-id: 8d3a5c41003951b74b29bc5f1d949b2b22da0cee
Summary:
This test frequently times out under TSAN; reducing the number of random
iterations to make it complete faster.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5635
Test Plan: buck test mode/dev-tsan internal_repo_rocksdb/repo:compact_on_deletion_collector_test
Differential Revision: D16523505
Pulled By: ltamasi
fbshipit-source-id: 6a69909bce9d204c891150fcb3d536547b3253d0
Summary:
Instead of reusing `TransactionOptions::max_write_batch_size` for determining when to flush a write batch for write unprepared, add a new variable called `write_batch_flush_threshold` for this use case instead.
Also add `TransactionDBOptions::default_write_batch_flush_threshold` which sets the default value if `TransactionOptions::write_batch_flush_threshold` is unspecified.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5633
Differential Revision: D16520364
Pulled By: lth
fbshipit-source-id: d75ae5a2141ce7708982d5069dc3f0b58d250e8c
Summary:
Transaction::RollbackToSavePoint undos the modification made since the SavePoint beginning, and also unlocks the corresponding keys, which are tracked in the last SavePoint. Currently ::PopSavePoint simply discard these tracked keys, leaving them locked in the lock manager. This breaks a subsequent ::RollbackToSavePoint behavior as it loses track of such keys, and thus cannot unlock them. The patch fixes ::PopSavePoint by passing on the track key information to the previous SavePoint.
Fixes https://github.com/facebook/rocksdb/issues/5618
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5628
Differential Revision: D16505325
Pulled By: lth
fbshipit-source-id: 2bc3b30963ab4d36d996d1f66543c93abf358980
Summary:
Simplify WriteUnpreparedTxnReadCallback so we just have one function `CalcMaxVisibleSeq`. Also, there's no need for the read callback to hold onto the transaction any more, so just hold the set of unprep_seqs, reducing about of indirection in `IsVisibleFullCheck`.
Also, some comments about using transaction snapshot were out of date, so remove them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5621
Differential Revision: D16459883
Pulled By: lth
fbshipit-source-id: cd581323fd18982e817d99af57b6eaba59e599bb
Summary:
The ObjectRegistry class replaces the Registrar and NewCustomObjects. Objects are registered with the registry by Type (the class must implement the static const char *Type() method).
This change is necessary for a few reasons:
- By having a class (rather than static template instances), the class can be passed between compilation units, meaning that objects could be registered and shared from a dynamic library with an executable.
- By having a class with instances, different units could have different objects registered. This could be useful if, for example, one Option allowed for a dynamic library and one did not.
When combined with some other PRs (being able to load shared libraries, a Configurable interface to configure objects to/from string), this code will allow objects in external shared libraries to be added to a RocksDB image at run-time, rather than requiring every new extension to be built into the main library and called explicitly by every program.
Test plan (on riversand963's devserver)
```
$COMPILE_WITH_ASAN=1 make -j32 all && sleep 1 && make check
```
All tests pass.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5293
Differential Revision: D16363396
Pulled By: riversand963
fbshipit-source-id: fbe4acb615bfc11103eef40a0b288845791c0180
Summary:
There are a number of fixes in this PR (with most bugs found via the added stress tests):
1. Re-enable reseek optimization. This was initially disabled to avoid infinite loops in https://github.com/facebook/rocksdb/pull/3955 but this can be resolved by remembering not to reseek after a reseek has already been done. This problem only affects forward iteration in `DBIter::FindNextUserEntryInternal`, as we already disable reseeking in `DBIter::FindValueForCurrentKeyUsingSeek`.
2. Verify that ReadOption.snapshot can be safely used for iterator creation. Some snapshots would not give correct results because snaphsot validation would not be enforced, breaking some assumptions in Prev() iteration.
3. In the non-snapshot Get() case, reads done at `LastPublishedSequence` may not be enough, because unprepared sequence numbers are not published. Use `std::max(published_seq, max_visible_seq)` to do lookups instead.
4. Add stress test to test reading own writes.
5. Minor bug in the allow_concurrent_memtable_write case where we forgot to pass in batch_per_txn_.
6. Minor performance optimization in `CalcMaxUnpreparedSequenceNumber` by assigning by reference instead of value.
7. Add some more comments everywhere.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5573
Differential Revision: D16276089
Pulled By: lth
fbshipit-source-id: 18029c944eb427a90a87dee76ac1b23f37ec1ccb
Summary:
- Compute correlation between a few features and predictions, e.g., number of accesses since the last access vs number of accesses till the next access on a block.
- Output human readable trace file so python can consume it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5596
Test Plan: make clean && USE_CLANG=1 make check -j32
Differential Revision: D16373200
Pulled By: HaoyuHuang
fbshipit-source-id: c848d26bc2e9210461f317d7dbee42d55be5a0cc
Summary:
This PR traces the referenced key for Get for all types of blocks. This is useful when evaluating hybrid row-block caches.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5548
Test Plan: make clean && USE_CLANG=1 make check -j32
Differential Revision: D16157979
Pulled By: HaoyuHuang
fbshipit-source-id: f6327411c9deb74e35e22a35f66cdbae09ab9d87
Summary:
Refresh of the earlier change here - https://github.com/facebook/rocksdb/issues/5135
This is a review request for code change needed for - https://github.com/facebook/rocksdb/issues/3469
"Add support for taking snapshot of a column family and creating column family from a given CF snapshot"
We have an implementation for this that we have been testing internally. We have two new APIs that together provide this functionality.
(1) ExportColumnFamily() - This API is modelled after CreateCheckpoint() as below.
// Exports all live SST files of a specified Column Family onto export_dir,
// returning SST files information in metadata.
// - SST files will be created as hard links when the directory specified
// is in the same partition as the db directory, copied otherwise.
// - export_dir should not already exist and will be created by this API.
// - Always triggers a flush.
virtual Status ExportColumnFamily(ColumnFamilyHandle* handle,
const std::string& export_dir,
ExportImportFilesMetaData** metadata);
Internally, the API will DisableFileDeletions(), GetColumnFamilyMetaData(), Parse through
metadata, creating links/copies of all the sst files, EnableFileDeletions() and complete the call by
returning the list of file metadata.
(2) CreateColumnFamilyWithImport() - This API is modeled after IngestExternalFile(), but invoked only during a CF creation as below.
// CreateColumnFamilyWithImport() will create a new column family with
// column_family_name and import external SST files specified in metadata into
// this column family.
// (1) External SST files can be created using SstFileWriter.
// (2) External SST files can be exported from a particular column family in
// an existing DB.
// Option in import_options specifies whether the external files are copied or
// moved (default is copy). When option specifies copy, managing files at
// external_file_path is caller's responsibility. When option specifies a
// move, the call ensures that the specified files at external_file_path are
// deleted on successful return and files are not modified on any error
// return.
// On error return, column family handle returned will be nullptr.
// ColumnFamily will be present on successful return and will not be present
// on error return. ColumnFamily may be present on any crash during this call.
virtual Status CreateColumnFamilyWithImport(
const ColumnFamilyOptions& options, const std::string& column_family_name,
const ImportColumnFamilyOptions& import_options,
const ExportImportFilesMetaData& metadata,
ColumnFamilyHandle** handle);
Internally, this API creates a new CF, parses all the sst files and adds it to the specified column family, at the same level and with same sequence number as in the metadata. Also performs safety checks with respect to overlaps between the sst files being imported.
If incoming sequence number is higher than current local sequence number, local sequence
number is updated to reflect this.
Note, as the sst files is are being moved across Column Families, Column Family name in sst file
will no longer match the actual column family on destination DB. The API does not modify Column
Family name or id in the sst files being imported.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5495
Differential Revision: D16018881
fbshipit-source-id: 9ae2251025d5916d35a9fc4ea4d6707f6be16ff9
Summary:
Currently, we are tracking keys we need to rollback via a separate structure specific to WriteUnprepared in write_set_keys_.
We already have a data structure called tracked_keys_ used to track which keys to unlock on transaction termination. This is exactly what we want, since we should only rollback keys that we have locked anyway.
Save some memory by reusing that data structure instead of making our own.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5562
Differential Revision: D16206484
Pulled By: lth
fbshipit-source-id: 5894d2b824a4b19062d84adbd6e6e86f00047488
Summary:
- Provide assignment operator in CompactionStats
- Provide a copy constructor for FileDescriptor
- Remove std::move from "return std::move(t)" in BoundedQueue
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5553
Differential Revision: D16230170
fbshipit-source-id: fd7c6e52390b2db1be24141e25649cf62424d078
Summary:
This PR adds a ghost cache for admission control. Specifically, it admits an entry on its second access.
It also adds a hybrid row-block cache that caches the referenced key-value pairs of a Get/MultiGet request instead of its blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5534
Test Plan: make clean && COMPILE_WITH_ASAN=1 make check -j32
Differential Revision: D16101124
Pulled By: HaoyuHuang
fbshipit-source-id: b99edda6418a888e94eb40f71ece45d375e234b1
Summary:
Previously `GetAllKeyVersions()` supports default column family only. This PR add support for other column families.
Test plan (devserver):
```
$make clean && COMPILE_WITH_ASAN=1 make -j32 db_basic_test
$./db_basic_test --gtest_filter=DBBasicTest.GetAllKeyVersions
```
All other unit tests must pass.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5544
Differential Revision: D16147551
Pulled By: riversand963
fbshipit-source-id: 5a61aece2a32d789e150226a9b8d53f4a5760168
Summary:
1. Cleanup WAL trash files on open
2. Don't apply deletion rate limit if WAL dir is different from db dir
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5520
Test Plan: Add new unit tests and make check
Differential Revision: D16096750
Pulled By: anand1976
fbshipit-source-id: 6f07858ad864b754b711db416f0389c45ede599b
Summary:
This PR creates cache_simulator.h file. It contains a CacheSimulator that runs against a block cache trace record. We can add alternative cache simulators derived from CacheSimulator later. For example, this PR adds a PrioritizedCacheSimulator that inserts filter/index/uncompressed dictionary blocks with high priority.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5517
Test Plan: make clean && COMPILE_WITH_ASAN=1 make check -j32
Differential Revision: D16043689
Pulled By: HaoyuHuang
fbshipit-source-id: 65f28ed52b866ffb0e6eceffd7f9ca7c45bb680d
Summary:
~DBWithTTLImpl() fails after calling Close() function (will invoke the
Close() function of DBImpl), because the Close() function deletes
default_cf_handle_ which is used in the GetOptions() function called
in ~DBWithTTLImpl(), hence lead to segfault.
Fix by creating a Close() function for the DBWithTTLImpl class and do
the close and the work originally in ~DBWithTTLImpl(). If the Close()
function is not called, it will be called in the ~DBWithTTLImpl()
function.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5485
Test Plan: make clean; USE_CLANG=1 make all check -j
Differential Revision: D15924498
fbshipit-source-id: 567397fb972961059083a1ae0f9f99ff74872b78
Summary:
This PR adds a BlockCacheTraceSimulator that reports the miss ratios given different cache configurations. A cache configuration contains "cache_name,num_shard_bits,cache_capacities". For example, "lru, 1, 1K, 2K, 4M, 4G".
When we replay the trace, we also perform lookups and inserts on the simulated caches.
In the end, it reports the miss ratio for each tuple <cache_name, num_shard_bits, cache_capacity> in a output file.
This PR also adds a main source block_cache_trace_analyzer so that we can run the analyzer in command line.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5449
Test Plan:
Added tests for block_cache_trace_analyzer.
COMPILE_WITH_ASAN=1 make check -j32.
Differential Revision: D15797073
Pulled By: HaoyuHuang
fbshipit-source-id: aef0c5c2e7938f3e8b6a10d4a6a50e6928ecf408
Summary:
CLANG would complain if we pass const to lambda function and appveyor complains if we don't (https://github.com/facebook/rocksdb/pull/5443). The patch fixes that by using the default capture mode.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5447
Differential Revision: D15788722
Pulled By: maysamyabandeh
fbshipit-source-id: 47e7f49264afe31fdafe42cb8bf93da126abfca9
Summary:
CLANG complains that passing const to thread is not necessary. The patch removes it form PreparedHeap::Concurrent test.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5443
Differential Revision: D15781598
Pulled By: maysamyabandeh
fbshipit-source-id: 3aceb05d96182fa4726d6d37eed45fd3aac4c016
Summary:
Internally PreparedHeap is currently using a priority_queue. The rationale was the in the initial design PreparedHeap::AddPrepared could be called in arbitrary order. With the recent optimizations, we call ::AddPrepared only from the main write queue, which results into in-order insertion into PreparedHeap. The patch thus replaces the underlying priority_queue with a more efficient deque implementation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5436
Differential Revision: D15752147
Pulled By: maysamyabandeh
fbshipit-source-id: e6960f2b2097e13137dded1ceeff3b10b03b0aeb
Summary:
This is a port of this PR into WriteUnprepared:
https://github.com/facebook/rocksdb/pull/5014
This also reverts this test change to restore some flaky write unprepared
tests: https://github.com/facebook/rocksdb/pull/5315
Tested with:
$ gtest-parallel ./transaction_test --gtest_filter=MySQLStyleTransactionTest/MySQLStyleTransactionTest.TransactionStressTest/9 --repeat=128
[128/128] MySQLStyleTransactionTest/MySQLStyleTransactionTest.TransactionStressTest/9 (18250 ms)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5439
Differential Revision: D15761405
Pulled By: lth
fbshipit-source-id: ae2581fd942d8a5b3f9278fd6bc3c1ac0b2c964c
Summary:
If a memtable definitely covers a key, there isn't a need to check older memtables.
We can skip them by checking the earliest sequence number.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4941
Differential Revision: D13932666
fbshipit-source-id: b9d52f234b8ad9dd3bf6547645cd457175a3ca9b
Summary:
The patch reduces the contention over prepared_mutex_ using these techniques:
1) Move ::RemovePrepared() to be called from the commit callback when we have two write queues.
2) Use two separate mutex for PreparedHeap, one prepared_mutex_ needed for ::RemovePrepared, and one ::push_pop_mutex() needed for ::AddPrepared(). Given that we call ::AddPrepared only from the first write queue and ::RemovePrepared mostly from the 2nd, this will result into each the two write queues not competing with each other over a single mutex. ::RemovePrepared might occasionally need to acquire ::push_pop_mutex() if ::erase() ends up with calling ::pop()
3) Acquire ::push_pop_mutex() on the first callback of the write queue and release it on the last.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5420
Differential Revision: D15741985
Pulled By: maysamyabandeh
fbshipit-source-id: 84ce8016007e88bb6e10da5760ba1f0d26347735
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
Currently we validate options in DB::Open. However the validation step is missing when options are dynamically updated in ::SetOptions. The patch fixes that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5368
Differential Revision: D15540101
Pulled By: maysamyabandeh
fbshipit-source-id: d27bbffd8f0252d1b50bcf59e0a70a278ed937f4
Summary:
util/ means for lower level libraries. trace_replay is highly integrated to DB and sometimes call DB. Move it out to a separate directory.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5376
Differential Revision: D15550938
Pulled By: siying
fbshipit-source-id: f46dce5ceffdc05a73f26379c7bb1b79ebe6c207
Summary:
Many logging related source files are under util/. It will be more structured if they are together.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5387
Differential Revision: D15579036
Pulled By: siying
fbshipit-source-id: 3850134ed50b8c0bb40a0c8ae1f184fa4081303f
Summary:
Right now, with auto roll logger, options.keep_log_file_num enforcement is triggered by events like DB reopen or full obsolete scan happens. In the mean time, the size and number of log files can grow without a limit. We put a stronger enforcement to the option, so that the number of log files can always under control.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5370
Differential Revision: D15570413
Pulled By: siying
fbshipit-source-id: 0916c3c4d42ab8fdd29389ee7fd7e1557b03176e
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
util/ means for lower level libraries, so it's a good idea to move the files which requires knowledge to DB out. Create a file/ and move some files there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5375
Differential Revision: D15550935
Pulled By: siying
fbshipit-source-id: 61a9715dcde5386eebfb43e93f847bba1ae0d3f2
Summary:
This enables the user to set TransactionDBOptions::skip_concurrency_control so the standard `DB::Write(const WriteOptions& opts, WriteBatch* updates)` would skip the concurrency control. This would give higher throughput to the users who know their use case doesn't need concurrency control.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5330
Differential Revision: D15525932
Pulled By: maysamyabandeh
fbshipit-source-id: 68421ac1ba34f549a4a8de9ce4c2dccf6fb4b06b
Summary:
When committing a transaction without prepare, WritePrepared simply writes the batch to db and add the commit entry to CommitCache. When two_write_queues=true, following the rule of committing only from 2nd write queue, the first write, writes the batch and the only thing the 2nd write does is to write the commit entry to CommitCache. Currently the write batch in 2nd write is set to an empty LogData entry, while the write to the WAL could simply be entirely disabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5327
Differential Revision: D15424546
Pulled By: maysamyabandeh
fbshipit-source-id: 3d9ea3922d5196984c584d62a3ed57e1f7ca7b9f
Summary:
WritePrepared transactions when configured with two_write_queues=true offers higher throughput with unordered_write feature without however compromising the rocksdb guarantees. This is because it performs ordering among writes in a 2nd step that is not tied to memtable write speed. The 2nd step is naturally provided by 2PC when the commit phase does the ordering as well. Without 2PC, the 2nd step would only be provided when we use two_write_queues=true, where WritePrepared after performing the writes, in a 2nd step uses the 2nd queue to assign order to the writes.
The patch clarifies the need for two_write_queues=true in the HISTORY and inline comments of unordered_writes. Moreover it extends the stress tests of WritePrepared to unordred_write.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5313
Differential Revision: D15379977
Pulled By: maysamyabandeh
fbshipit-source-id: 5b6f05b9b59285dcbf3b0532215ba9fe7d926e00
Summary:
They are kind of flaky at the moment. Will re-enable it when flakiness is fixed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5315
Differential Revision: D15382744
Pulled By: maysamyabandeh
fbshipit-source-id: 8b2f9d81a4bb34bfd51481727a682d5cd063c5e3
Summary:
The recent improvement in https://github.com/facebook/rocksdb/pull/3661 could cause a deadlock: When writing recoverable state, we also commit its sequence number to commit table, which could result into evicting existing commit entry, which could result into advancing max_evicted_seq_, which would need to get snapshots from database, which requires obtaining db mutex. The patch releases db_mutex before calling the callback in WriteRecoverableState to avoid the potential deadlock. It also improves the stress tests to let the issue be manifested in the tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5306
Differential Revision: D15341458
Pulled By: maysamyabandeh
fbshipit-source-id: 05dcbed7e21b789fd1e5fd5ee8eea08077162323
Summary:
Performing unordered writes in rocksdb when unordered_write option is set to true. When enabled the writes to memtable are done without joining any write thread. This offers much higher write throughput since the upcoming writes would not have to wait for the slowest memtable write to finish. The tradeoff is that the writes visible to a snapshot might change over time. If the application cannot tolerate that, it should implement its own mechanisms to work around that. Using TransactionDB with WRITE_PREPARED write policy is one way to achieve that. Doing so increases the max throughput by 2.2x without however compromising the snapshot guarantees.
The patch is prepared based on an original by siying
Existing unit tests are extended to include unordered_write option.
Benchmark Results:
```
TEST_TMPDIR=/dev/shm/ ./db_bench_unordered --benchmarks=fillrandom --threads=32 --num=10000000 -max_write_buffer_number=16 --max_background_jobs=64 --batch_size=8 --writes=3000000 -level0_file_num_compaction_trigger=99999 --level0_slowdown_writes_trigger=99999 --level0_stop_writes_trigger=99999 -enable_pipelined_write=false -disable_auto_compactions --unordered_write=1
```
With WAL
- Vanilla RocksDB: 78.6 MB/s
- WRITER_PREPARED with unordered_write: 177.8 MB/s (2.2x)
- unordered_write: 368.9 MB/s (4.7x with relaxed snapshot guarantees)
Without WAL
- Vanilla RocksDB: 111.3 MB/s
- WRITER_PREPARED with unordered_write: 259.3 MB/s MB/s (2.3x)
- unordered_write: 645.6 MB/s (5.8x with relaxed snapshot guarantees)
- WRITER_PREPARED with unordered_write disable concurrency control: 185.3 MB/s MB/s (2.35x)
Limitations:
- The feature is not yet extended to `max_successive_merges` > 0. The feature is also incompatible with `enable_pipelined_write` = true as well as with `allow_concurrent_memtable_write` = false.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5218
Differential Revision: D15219029
Pulled By: maysamyabandeh
fbshipit-source-id: 38f2abc4af8780148c6128acdba2b3227bc81759
Summary:
MultiGet batching was implemented in #5011 in order to reduce CPU utilization when looking up multiple keys at once. This PR implements corresponding ```MultiGet``` and ```MultiGetSingleCFForUpdate``` in ```rocksdb::Transaction``` that call the underlying batching implementation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5210
Differential Revision: D15048164
Pulled By: anand1976
fbshipit-source-id: c52f6043102ab0cbc723f4cba2a7b7d1767f6f52
Summary:
The existing implementation does not guarantee bytes reach disk every `bytes_per_sync` when writing SST files, or every `wal_bytes_per_sync` when writing WALs. This can cause confusing behavior for users who enable this feature to avoid large syncs during flush and compaction, but then end up hitting them anyways.
My understanding of the existing behavior is we used `sync_file_range` with `SYNC_FILE_RANGE_WRITE` to submit ranges for async writeback, such that we could continue processing the next range of bytes while that I/O is happening. I believe we can preserve that benefit while also limiting how far the processing can get ahead of the I/O, which prevents huge syncs from happening when the file finishes.
Consider this `sync_file_range` usage: `sync_file_range(fd_, 0, static_cast<off_t>(offset + nbytes), SYNC_FILE_RANGE_WAIT_BEFORE | SYNC_FILE_RANGE_WRITE)`. Expanding the range to start at 0 and adding the `SYNC_FILE_RANGE_WAIT_BEFORE` flag causes any pending writeback (like from a previous call to `sync_file_range`) to finish before it proceeds to submit the latest `nbytes` for writeback. The latest `nbytes` are still written back asynchronously, unless processing exceeds I/O speed, in which case the following `sync_file_range` will need to wait on it.
There is a second change in this PR to use `fdatasync` when `sync_file_range` is unavailable (determined statically) or has some known problem with the underlying filesystem (determined dynamically).
The above two changes only apply when the user enables a new option, `strict_bytes_per_sync`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5183
Differential Revision: D14953553
Pulled By: siying
fbshipit-source-id: 445c3862e019fb7b470f9c7f314fc231b62706e9
Summary:
Savepoints are assumed to be used in a stack-wise fashion (only
the top element should be used), so they were stored by `WriteBatch`
in a member variable `save_points` using an std::stack.
Conceptually this is fine, but the implementation had a few issues:
- the `save_points_` instance variable was a plain pointer to a heap-
allocated `SavePoints` struct. The destructor of `WriteBatch` simply
deletes this pointer. However, the copy constructor of WriteBatch
just copied that pointer, meaning that copying a WriteBatch with
active savepoints will very likely have crashed before. Now a proper
copy of the savepoints is made in the copy constructor, and not just
a copy of the pointer
- `save_points_` was an std::stack, which defaults to `std::deque` for
the underlying container. A deque is a bit over the top here, as we
only need access to the most recent savepoint (i.e. stack.top()) but
never any elements at the front. std::deque is rather expensive to
initialize in common environments. For example, the STL implementation
shipped with GNU g++ will perform a heap allocation of more than 500
bytes to create an empty deque object. Although the `save_points_`
container is created lazily by RocksDB, moving from a deque to a plain
`std::vector` is much more memory-efficient. So `save_points_` is now
a vector.
- `save_points_` was changed from a plain pointer to an `std::unique_ptr`,
making ownership more explicit.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5192
Differential Revision: D15024074
Pulled By: maysamyabandeh
fbshipit-source-id: 5b128786d3789cde94e46465c9e91badd07a25d7
Summary:
Depending on the config, manual compaction (leveled compaction style) does following compactions:
L0->L1
L1->L2
...
Ln-1 -> Ln
Ln -> Ln
The final Ln -> Ln compaction is partly unnecessary as it recompacts all the files that were just generated by the Ln-1 -> Ln. We should avoid recompacting such files. This rule should be applied to Lmax only.
Resolves issue https://github.com/facebook/rocksdb/issues/4995
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5138
Differential Revision: D14940106
Pulled By: miasantreble
fbshipit-source-id: 8d3cf5507a17e76f3333cfd4bac5256d005636e5
Summary:
This branch contains two small improvements:
* Create `LockMap` entries using `std::make_shared`. This saves one heap allocation per LockMap entry but also locates the control block and the LockMap object closely together in memory, which can help with caching
* Reorder the members of `TrackedTrxInfo`, so that the resulting struct uses less memory (at least on 64bit systems)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5193
Differential Revision: D14934536
Pulled By: maysamyabandeh
fbshipit-source-id: f7b49812bb4b6029eef9d131e7cd56260df5b28e
Summary:
In `PessimisticTransaction::TryLock`, we were calling `TrackKey` even when assume_tracked=true, which defeats the purpose of assume_tracked. Remove this.
For keys that are already tracked, TrackKey will actually bump some counters (num_reads/num_writes) which are consumed in `TransactionBaseImpl::GetTrackedKeysSinceSavePoint`, and this is used to determine which keys were tracked since the last savepoint. I believe this functionality should still work, since I think the user should not call GetForUpdate/Put(assume_tracked=true) across savepoints, and if they do, they should not expect the Put(assume_tracked=true) to show up as a tracked key in the second savepoint.
This is another 2-3% cpu improvement.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5173
Differential Revision: D14883809
Pulled By: lth
fbshipit-source-id: 7d09f0772da422384af0519773e310c22b0cbca3
Summary:
When ReadOption doesn't specify a snapshot, WritePrepared::Get used kMaxSequenceNumber to avoid the cost of creating a new snapshot object (that requires sync over db_mutex). This creates a race condition if it is reading from the writes of a transaction that had duplicate keys: each instance of duplicate key is inserted with a different sequence number and depending on the ordering the ::Get might skip the newer one and read the older one that is obsolete.
The patch fixes that by using last published seq as the snapshot sequence number. It also adds a check after the read is done to ensure that the max_evicted_seq has not advanced the aforementioned seq, which is a very unlikely event. If it did, then the read is not valid since the seq is not backed by an actually snapshot to let IsInSnapshot handle that properly when an overlapping commit is evicted from commit cache.
A unit test is added to reproduce the race condition with duplicate keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5147
Differential Revision: D14758815
Pulled By: maysamyabandeh
fbshipit-source-id: a56915657132cf6ba5e3f5ea1b5d78c803407719
Summary:
This PR introduces a new MultiGet() API, with the underlying implementation grouping keys based on SST file and batching lookups in a file. The reason for the new API is twofold - the definition allows callers to allocate storage for status and values on stack instead of std::vector, as well as return values as PinnableSlices in order to avoid copying, and it keeps the original MultiGet() implementation intact while we experiment with batching.
Batching is useful when there is some spatial locality to the keys being queries, as well as larger batch sizes. The main benefits are due to -
1. Fewer function calls, especially to BlockBasedTableReader::MultiGet() and FullFilterBlockReader::KeysMayMatch()
2. Bloom filter cachelines can be prefetched, hiding the cache miss latency
The next step is to optimize the binary searches in the level_storage_info, index blocks and data blocks, since we could reduce the number of key comparisons if the keys are relatively close to each other. The batching optimizations also need to be extended to other formats, such as PlainTable and filter formats. This also needs to be added to db_stress.
Benchmark results from db_bench for various batch size/locality of reference combinations are given below. Locality was simulated by offsetting the keys in a batch by a stride length. Each SST file is about 8.6MB uncompressed and key/value size is 16/100 uncompressed. To focus on the cpu benefit of batching, the runs were single threaded and bound to the same cpu to eliminate interference from other system events. The results show a 10-25% improvement in micros/op from smaller to larger batch sizes (4 - 32).
Batch Sizes
1 | 2 | 4 | 8 | 16 | 32
Random pattern (Stride length 0)
4.158 | 4.109 | 4.026 | 4.05 | 4.1 | 4.074 - Get
4.438 | 4.302 | 4.165 | 4.122 | 4.096 | 4.075 - MultiGet (no batching)
4.461 | 4.256 | 4.277 | 4.11 | 4.182 | 4.14 - MultiGet (w/ batching)
Good locality (Stride length 16)
4.048 | 3.659 | 3.248 | 2.99 | 2.84 | 2.753
4.429 | 3.728 | 3.406 | 3.053 | 2.911 | 2.781
4.452 | 3.45 | 2.833 | 2.451 | 2.233 | 2.135
Good locality (Stride length 256)
4.066 | 3.786 | 3.581 | 3.447 | 3.415 | 3.232
4.406 | 4.005 | 3.644 | 3.49 | 3.381 | 3.268
4.393 | 3.649 | 3.186 | 2.882 | 2.676 | 2.62
Medium locality (Stride length 4096)
4.012 | 3.922 | 3.768 | 3.61 | 3.582 | 3.555
4.364 | 4.057 | 3.791 | 3.65 | 3.57 | 3.465
4.479 | 3.758 | 3.316 | 3.077 | 2.959 | 2.891
dbbench command used (on a DB with 4 levels, 12 million keys)-
TEST_TMPDIR=/dev/shm numactl -C 10 ./db_bench.tmp -use_existing_db=true -benchmarks="readseq,multireadrandom" -write_buffer_size=4194304 -target_file_size_base=4194304 -max_bytes_for_level_base=16777216 -num=12000000 -reads=12000000 -duration=90 -threads=1 -compression_type=none -cache_size=4194304000 -batch_size=32 -disable_auto_compactions=true -bloom_bits=10 -cache_index_and_filter_blocks=true -pin_l0_filter_and_index_blocks_in_cache=true -multiread_batched=true -multiread_stride=4
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5011
Differential Revision: D14348703
Pulled By: anand1976
fbshipit-source-id: 774406dab3776d979c809522a67bedac6c17f84b
Summary:
The LockInfo struct is not easy to copy because it contains std::vector. Reduce copies by using move constructor and `unordered_map::emplace`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5172
Differential Revision: D14882053
Pulled By: lth
fbshipit-source-id: 93999ec6ab1a5841fb5115abb764b6c1831a6de1
Summary:
Create new function NPHash64() and GetSliceNPHash64(), which are currently
implemented using murmurhash.
Replace the current direct call of murmurhash() to use the new functions
if the hash results are not used in on-disk format.
This will make it easier to try out or switch to alternative functions
in the uses where data format compatibility doesn't need to be considered.
This part shouldn't have any performance impact.
Also, the sharded cache hash function is changed to the new format, because
it falls into this categoery. It doesn't show visible performance impact
in db_bench results. CPU showed by perf is increased from about 0.2% to 0.4%
in an extreme benchmark setting (4KB blocks, no-compression, everything
cached in block cache). We've known that the current hash function used,
our own Hash() has serious hash quality problem. It can generate a lots of
conflicts with similar input. In this use case, it means extra lock contention
for reads from the same file. This slight CPU regression is worthy to me
to counter the potential bad performance with hot keys. And hopefully this
will get further improved in the future with a better hash function.
cache_test's condition is relaxed a little bit to. The new hash is slightly
more skewed in this use case, but I manually checked the data and see
the hash results are still in a reasonable range.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5155
Differential Revision: D14834821
Pulled By: siying
fbshipit-source-id: ec9a2c0a2f8ae4b54d08b13a5c2e9cc97aa80cb5
Summary:
Annotate all of the logging functions to inform the compiler that these
use printf-style formatting arguments. This allows the compiler to emit
warnings if the format arguments are incorrect.
This also fixes many problems reported now that format string checking
is enabled. Many of these are simply mix-ups in the argument type (e.g,
int vs uint64_t), but in several cases the wrong number of arguments
were being passed in which can cause the code to crash.
The primary motivation for this was to fix the log message in
`DBImpl::SwitchMemtable()` which caused a segfault due to an extra %s
format parameter with no argument supplied.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5089
Differential Revision: D14574795
Pulled By: simpkins
fbshipit-source-id: 0921b03f0743652bf4ae21e414ff54b3bb65422a
Summary:
Ubsna complains that in initialization of WriteUnpreparedTxnReadCallback the method of the child class is used before the parent class is constructed. The patch fixes that by making the aforementioned method static.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5148
Differential Revision: D14760098
Pulled By: maysamyabandeh
fbshipit-source-id: cf19b7c1fdb5de0a54e62c1deebe09a0fa048ded
Summary:
In prepare phase of 2PC, the db promises to remember the prepared data, for possible future commits. To fulfill the promise the prepared data must be persisted in the WAL so that they could be recovered after a crash. The log that contains a prepare batch that is not committed yet, is marked so that it is not garbage collected before the transaction commits/rollbacks. The bug was that the write to the log file and the mark of the file was not atomic, and WAL gc could have happened before the WAL log is actually marked. This patch moves the marking logic to PreReleaseCallback so that the WAL gc logic that joins both write threads would see the WAL write and WAL mark atomically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5121
Differential Revision: D14665210
Pulled By: maysamyabandeh
fbshipit-source-id: 1d66aeb1c66a296cb4899a5a20c4d40c59e4b534
Summary:
WriteUnPrepared adds a virtual function, MaxUnpreparedSequenceNumber, to ReadCallback, which returns 0 unless WriteUnPrepared is enabled and the transaction has uncommitted data written to the DB. Together with snapshot sequence number, this determines the last sequence that is visible to reads.
The patch clarifies the guarantees of the GetIterator API in WriteUnPrepared transactions and make use of that to statically initialize the read callback and thus avoid the virtual call.
Furthermore it increases the minimum value for min_uncommitted from 0 to 1 as seq 0 is used only for last level keys that are committed in all snapshots.
The following benchmark shows +0.26% higher throughput in seekrandom benchmark.
Benchmark:
./db_bench --benchmarks=fillrandom --use_existing_db=0 --num=1000000 --db=/dev/shm/dbbench
./db_bench --benchmarks=seekrandom[X10] --use_existing_db=1 --db=/dev/shm/dbbench --num=1000000 --duration=60 --seek_nexts=100
seekrandom [AVG 10 runs] : 20355 ops/sec; 225.2 MB/sec
seekrandom [MEDIAN 10 runs] : 20425 ops/sec; 225.9 MB/sec
./db_bench_lessvirtual3 --benchmarks=seekrandom[X10] --use_existing_db=1 --db=/dev/shm/dbbench --num=1000000 --duration=60 --seek_nexts=100
seekrandom [AVG 10 runs] : 20409 ops/sec; 225.8 MB/sec
seekrandom [MEDIAN 10 runs] : 20487 ops/sec; 226.6 MB/sec
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5049
Differential Revision: D14366459
Pulled By: maysamyabandeh
fbshipit-source-id: ebaff8908332a5ae9af7defeadabcb624be660ef
Summary:
Compaction would depend on max_evicted_seq_ value. The ::Initialize method should do that after max_evicted_seq_ is properly initialized. The patch also back ports #4853 from WritePrepared txn to WriteUnPrepared.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5128
Differential Revision: D14686562
Pulled By: maysamyabandeh
fbshipit-source-id: b2355025712a72676ac3b20a95258adcf4774490
Summary:
WAL files are currently not subject to deletion rate limiting by DeleteScheduler. If the size of the WAL files is significant, this can cause a high delete rate on SSDs that may affect other operations. To fix it, force WAL file deletions to go through the SstFileManager. Original PR for this is #2768
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5116
Differential Revision: D14669437
Pulled By: anand1976
fbshipit-source-id: c5f62d0640cebaa1574de841a1d01e4ce2faadf0
Summary:
The code convention we are following, Google C++ Style, discourage
alias in header files, especially public headers:
https://google.github.io/styleguide/cppguide.html#Aliases
Remove some of them. Might removed some from .cc files as well to be consistent.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5113
Differential Revision: D14633030
Pulled By: siying
fbshipit-source-id: b990edc919d5de60295992284f980195e501d424
Summary:
Right now, BlobDB::Open() fails to put all trash files to delete scheduler,
which causes some trash files permanently untracked.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5103
Differential Revision: D14606095
Pulled By: siying
fbshipit-source-id: 41a9437a2948abb235c0ed85f9a04612d0e50183
Summary:
[RocksDB] Make it easier for users to load options from option file and set shared block cache.
Right now, it requires several dynamic casting for users to set the shared block cache to their option struct cast from the option file.
If people don't do that, every CF of every DB will generate its own 8MB block cache. It's not a usable setting. So we are dragging every user who loads options from the file into such a mess.
Instead, we should allow them to pass their cache object to LoadLatestOptions() and LoadOptionsFromFile(), so that those loaded option structs will have the shared block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5063
Differential Revision: D14518584
Pulled By: rashmishrm
fbshipit-source-id: c91430ff9425a0e67d76fc67931d755f491ca5aa
Summary:
This is a feature to sample data-block compressibility and and report them as stats. 1 in N (tunable) blocks is sampled for compressibility using two algorithms:
1. lz4 or snappy for fast compression
2. zstd or zlib for slow but higher compression.
The stats are reported to the caller as raw-bytes and compressed-bytes. The block continues to be compressed for storage using the specified CompressionType.
The db_bench_tool how has a command line option for specifying the sampling rate. It's default value is 0 (no sampling). To test the overhead for a certain value, users can compare the performance of db_bench_tool, varying the sampling rate. It is unlikely to have a noticeable impact for high values like 20.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4842
Differential Revision: D13629011
Pulled By: shobhitdayal
fbshipit-source-id: 14ca668bcab6499b2a1734edf848eb62a4f4fafa
Summary:
Initialize magic_number to zero to avoid such failure.
utilities/blob_db/blob_log_format.cc:91:3: error: 'magic_number' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
if (magic_number != kMagicNumber) {
^~
Signed-off-by: He Zhe <zhe.he@windriver.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5074
Differential Revision: D14505514
Pulled By: miasantreble
fbshipit-source-id: 4334462958c2b9c5a7c68c6ab24dadf94ad70902
Summary:
Add a mutex to the test to synchronize before accessing the shared txn object.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5052
Differential Revision: D14386861
Pulled By: maysamyabandeh
fbshipit-source-id: 5b32e209840b210c35af53848dc77f489a76c95a
Summary:
The patch fixes an improbable race condition between AddPrepared from one write queue and AdvanceMaxEvictedSeq from another queue. In this scenario AddPrepared finds prepare_seq lower than max and adding to PrepareHeap as usual while AdvanceMaxEvictedSeq has finished checking PrepareHeap against the future max. Thus when AdvanceMaxEvictedSeq finishes off by updating the max_evicted_seq_, PrepareHeap ends up with a prepared_seq lower than it which breaks the PrepareHeap contract. The fix is that in AddPrepared we check against the future_max_evicted_seq_ instead, which is update before AdvanceMaxEvictedSeq acquire prepare_mutex_ and looks into PrepareHeap.
A unit test added to test for the failure scenario. The code is also refactored a bit to remove the duplicate code between AdvanceMaxEvictedSeq and AddPrepared.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5025
Differential Revision: D14249028
Pulled By: maysamyabandeh
fbshipit-source-id: 072ea56663f40359662c05fafa6ac524417b0622
Summary:
The patch adds the sequence number of the rollback patch to the PrepareHeap when two_write_queues is enabled. Although the current behavior is still correct, the change simplifies reasoning about the code, by having all uncommitted batches registered with the PreparedHeap.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5026
Differential Revision: D14249401
Pulled By: maysamyabandeh
fbshipit-source-id: 1e3424edee5cd14e56ee35931ad3c93ed997cd5a
Summary:
When two_write_queues is enabled we call ::AddPrepared only from the main queue, which writes to both WAL and memtable, and call ::AddCommitted from the 2nd queue, which writes only to WAL. This simplifies the logic by avoiding concurrency between AddPrepared and also between AddCommitted. The patch fixes one case that did not conform with the rule above. This would allow future refactoring. For example AdvaneMaxEvictedSeq, which is invoked by AddCommitted, can be simplified by assuming lack of concurrent calls to it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5014
Differential Revision: D14210493
Pulled By: maysamyabandeh
fbshipit-source-id: 6db5ba372a294a568a14caa010576460917a4eab
Summary:
Statistics cost too much CPU for some use cases. Add two stats levels
so that people can choose to skip two types of expensive stats, timers and
histograms.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5027
Differential Revision: D14252765
Pulled By: siying
fbshipit-source-id: 75ecec9eaa44c06118229df4f80c366115346592
Summary:
The read path includes a callback function, ReadCallback, which would eventually calls IsInSnapshot to figure if a particular seq is in the reading snapshot or not. This callback is virtual, which adds the cost of multiple virtual function call to each read. The first few checks in IsInSnapshot, however, are quite trivial and take care of majority of the cases. The patch moves those to a non-virtual function in the the parent class, ReadCallback, to lower the virtual callback cost.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5018
Differential Revision: D14226562
Pulled By: maysamyabandeh
fbshipit-source-id: 6feed5b34f3b082e52092c5ef143e29b49c46b44
Summary:
When closing a BlobDB, it only waits for background tasks
to finish as the last thing, but the background task may access
some variables that are destroyed. The fix is to introduce a
shutdown function in the timer queue and call the function as
the first thing when destorying BlobDB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5005
Differential Revision: D14170342
Pulled By: siying
fbshipit-source-id: 081e6a2d99b9765d5956cf6cdfc290c07270c233
Summary:
Currently the transaction stress tests use thread id as the seed. Since the thread ids are likely to be the same across multiple runs, the seed is thus going to be the same. The patch includes time in calculating the seed to help covering a very different part of state space in each run of the stress tests. To be able to reproduce the bug in case the stress tests failed, it also prints out the time that was used to calculate the seed value.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5004
Differential Revision: D14144356
Pulled By: maysamyabandeh
fbshipit-source-id: 728ed522f550fc8b4f5f9f373259c05fe9a54556
