Summary:
Replace Options::use_direct_writes with Options::use_direct_io_for_flush_and_compaction
Now if Options::use_direct_io_for_flush_and_compaction = true, we will enable direct io for both reads and writes for flush and compaction job. Whereas Options::use_direct_reads controls user reads like iterator and Get().
Closes https://github.com/facebook/rocksdb/pull/2117
Differential Revision: D4860912
Pulled By: lightmark
fbshipit-source-id: d93575a8a5e780cf7e40797287edc425ee648c19
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
Summary:
add direct_io and compaction_readahead_size in db_stress
test direct_io under db_stress with compaction_readahead_size enabled to capture bugs found in production.
`./db_stress --allow_concurrent_memtable_write=0 --use_direct_reads --use_direct_writes --compaction_readahead_size=4096`
Closes https://github.com/facebook/rocksdb/pull/1906
Differential Revision: D4604514
Pulled By: IslamAbdelRahman
fbshipit-source-id: ebbf0ee
Summary:
Remove disableDataSync, and another similarly named disable_data_sync options.
This is being done to simplify options, and also because the performance gains of this feature can be achieved by other methods.
Closes https://github.com/facebook/rocksdb/pull/1859
Differential Revision: D4541292
Pulled By: sagar0
fbshipit-source-id: 5b3a6ca
Summary:
made db_stress capable of adding range deletions to its db and verifying their correctness. i'll make db_crashtest.py use this option later once the collapsing optimization (https://github.com/facebook/rocksdb/pull/1614) is committed because currently it slows down the test too much.
Closes https://github.com/facebook/rocksdb/pull/1625
Differential Revision: D4293939
Pulled By: ajkr
fbshipit-source-id: d3beb3a
Summary:
ZSTD 1.0.0 is coming. We can finally add a support of ZSTD without worrying about compatibility.
Still keep ZSTDNotFinal for compatibility reason.
Test Plan: Run all tests. Run db_bench with ZSTD version with RocksDB built with ZSTD 1.0 and older.
Reviewers: andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: cyan, igor, IslamAbdelRahman, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63141
Summary: To reduce number of options, merge source_compaction_factor, max_grandparent_overlap_bytes and expanded_compaction_factor into max_compaction_bytes.
Test Plan: Add two new unit tests. Run all existing tests, including jtest.
Reviewers: yhchiang, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59829
Summary:
Clock-based cache implemenetation aim to have better concurreny than
default LRU cache. See inline comments for implementation details.
Test Plan:
Update cache_test to run on both LRUCache and ClockCache. Adding some
new tests to catch some of the bugs that I fixed while implementing the
cache.
Reviewers: kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61647
Summary:
db_stress test is now failing because of this scenario
- run db_stress with merge_operator enabled (now we have a db with merge operands)
- run db_stress with merge_operator disabled (now when we fail to open the db)
the solution is to pass the merge_operator to the DB even if we are not going to do any merge operations
Test Plan: Check the failure
Reviewers: andrewkr, yiwu, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61311
Summary: OnTableFileCreated() now is also called when the file creaion fails. In that case, we shouldn't assert the file size is not 0.
Test Plan: Run crash test
Reviewers: yiwu, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: IslamAbdelRahman, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61137
Summary: Extend the option memtable_prefix_bloom_huge_page_tlb_size from just putting memtable bloom filter to huge page to memtable itself too.
Test Plan: Run all existing tests.
Reviewers: IslamAbdelRahman, yhchiang, andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60513
Summary: filter_deltes is not a frequently used feature. Remove it.
Test Plan: Run all test suites.
Reviewers: igor, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59427
Summary:
crash_test grep for 'fail' string in the output and if found it consider that we failed.
Update the output to use something else
Test Plan: make crash_test (still running)
Reviewers: yhchiang, sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57381
Summary:
As db_stress with CompactFiles possibly catches a previous bug currently,
temporarily disable CompactFiles in db_stress in its default setting
to allows new bug to be detected while investigating the bug in CompactFiles.
Test Plan: crash test
Reviewers: sdong, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57333
Comparable with Snappy on comp ratio.
Implemented using Windows API, does not require external package.
Avaiable since Windows 8 and server 2012.
Use -DXPRESS=1 with CMake to enable.
Summary:
Enable testing CompactFiles in db_stress by adding flag test_compact_files
to db_stress.
Test Plan:
./db_stress --test_compact_files=1 --compaction_style=0 --allow_concurrent_memtable_write=false --ops_per_thread=100000
./db_stress --test_compact_files=1 --compaction_style=1 --allow_concurrent_memtable_write=false --ops_per_thread=100000
Sample output (note that it's normal to have some CompactFiles() failed):
Stress Test : 491.891 micros/op 65054 ops/sec
: Wrote 21.98 MB (0.45 MB/sec) (45% of 3200352 ops)
: Wrote 1440728 times
: Deleted 441616 times
: Single deleted 38181 times
: 319251 read and 19025 found the key
: Prefix scanned 640520 times
: Iterator size sum is 9691415
: Iterated 319704 times
: Got errors 0 times
: 1323 CompactFiles() succeed
: 32 CompactFiles() failed
2016/04/11-15:50:58 Verification successful
Reviewers: sdong, IslamAbdelRahman, kradhakrishnan, yiwu, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56565
Summary:
Expose the inverse of ToString(hex=true) on Slice: Slice::DecodeHex
Refactor the other implementation of to/from hex in ldb_cmd.h to use the Slice
version
(Difference between the 2 is whether 0x is expected/produced in front of the hex
string or not)
Eliminated support for invalid odd length hex string - this is now invalid
instead of having 1/2 byte set
Added (inverse of HexToString) test for LDBCommand::StringToHex which also
indirectly tests Slice::ToString(true)
After moving the original implementation from ldb_cmd.h, updated it to much simpler/efficient version
(originally/inspired from https://github.com/facebook/wdt/blob/master/util/EncryptionUtils.cpp#L140-L169 )
Test Plan: run tests
Reviewers: uddipta, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56121
Summary: Default crash test uses prefix hash memtable, which is not compatible to concurrent memtable. Allow prefix test run with skip list and use skip list memtable when concurrent insert is used.
Test Plan: Run "python -u tools/db_crashtest.py whitebox" and watch sometimes skip list is used.
Reviewers: anthony, yhchiang, kradhakrishnan, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53907
Summary: Add an option of --allow_concurrent_memtable_write in stress test and cover it in crash test
Test Plan: Run crash test and make sure three combinations of the two options show up randomly.
Reviewers: IslamAbdelRahman, yhchiang, andrewkr, anthony, kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53811
Summary:
Give a name for every kill point, and allow users to disable some kill points based on prefixes. The kill points can be passed by db_stress through a command line paramter. This provides a way for users to boost the chance of triggering low frequency kill points
This allow follow up changes in crash test scripts to improve crash test coverage.
Test Plan:
Manually run db_stress with variable values of --kill_random_test and --kill_prefix_blacklist. Like this:
--kill_random_test=2 --kill_prefix_blacklist=Posix,WritableFileWriter::Append,WritableFileWriter::WriteBuffered,WritableFileWriter::Sync
Reviewers: igor, kradhakrishnan, rven, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48735
Summary:
Fixed the following tsan warning in db_stress.cc
WARNING: ThreadSanitizer: data race (pid=3163194)
Read of size 8 at 0x7fd1797cb518 by thread T32:
#0 VerifyDb tools/db_stress.cc:1731 (db_stress+0x000000040674)
#1 rocksdb::StressTest::ThreadBody(void*) tools/db_stress.cc:1191 (db_stress+0x0000000625a9)
#2 StartThreadWrapper util/env_posix.cc:1648 (db_stress+0x00000028bbbd)
Previous write of size 8 at 0x7fd1797cb518 by thread T31:
#0 VerifyDb tools/db_stress.cc:1726 (db_stress+0x00000004072a)
#1 rocksdb::StressTest::ThreadBody(void*) tools/db_stress.cc:1191 (db_stress+0x0000000625a9)
#2 StartThreadWrapper util/env_posix.cc:1648 (db_stress+0x00000028bbbd)
The cause is that in VerifyDb(), the static local const variable long max_key
can be read and written at the same time. This patch fixed it by making it
non-static.
Test Plan: db_stress
Reviewers: igor, sdong, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47703
Summary:
This patch fixes#7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
Summary: Add ZSTD compression type. The same way as adding LZ4.
Test Plan: run all tests. Generate files in db_bench. Make sure reads succeed. But the SST files cannot be opened in older versions. Also some other adhoc tests.
Reviewers: rven, anthony, IslamAbdelRahman, kradhakrishnan, igor
Reviewed By: igor
Subscribers: MarkCallaghan, maykov, yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D45747
Summary:
Up until this point we had DbOptions.num_subcompactions, but
it is semantically more correct to call this max_subcompactions since
we will schedule *up to* DbOptions.max_subcompactions smaller compactions
at a time during a compaction job.
I also added a --subcompactions option to db_bench
Test Plan: make all make check
Reviewers: sdong, igor, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D45069
Summary:
In prepration for running multiple threads at the same time during
a compaction job, this patch assigns each subcompaction its own state
(instead of sharing the one global CompactionState). Each subcompaction then
uses this state to update its statistics, keep track of its snapshots, etc.
during the course of execution. Then at the end of all the executions the
statistics are aggregated across the subcompactions so that the final result
is the same as if only one larger compaction had run.
Test Plan: ./db_test ./db_compaction_test ./compaction_job_test
Reviewers: sdong, anthony, igor, noetzli, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43239
Summary:
While working on single delete support for db_bench, I realized that
db_bench/db_stress contain a bunch of duplicate code related to
copmression and found some typos. This patch removes duplicate code,
typos and a redundant #ifndef in internal_stats.cc.
Test Plan: make db_stress && make db_bench && ./db_bench --benchmarks=compress,uncompress
Reviewers: yhchiang, sdong, rven, anthony, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43965
Summary:
When we first started, max_background_flushes was 0 by default and compaction thread was executing flushes (since there was no flush thread). Then, we switched the default max_background_flushes to 1. However, we still support the case where there is no flush thread and flushes are done in compaction. This is making our code a bit more complicated. By not supporting this use-case we can make our code simpler.
We have a special case that when you set max_background_flushes to 0, we
schedule the flush to execute on the compaction thread.
Test Plan: make check (there might be some unit tests that depend on this behavior)
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41931
Summary: This option is guarding the feature implemented 2 and a half years ago: D8991. The feature was enabled by default back then and has been running without issues. There is no reason why any client would turn this feature off. I found no reference in fbcode.
Test Plan: none
Reviewers: sdong, yhchiang, anthony, dhruba
Reviewed By: dhruba
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42063
Summary: This helps Windows port to format their changes, as discussed. Might have formatted some other codes too becasue last 10 commits include more.
Test Plan: Build it.
Reviewers: anthony, IslamAbdelRahman, kradhakrishnan, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D41961
Summary: Make RocksDb build and run on Windows to be functionally
complete and performant. All existing test cases run with no
regressions. Performance numbers are in the pull-request.
Test plan: make all of the existing unit tests pass, obtain perf numbers.
Co-authored-by: Praveen Rao praveensinghrao@outlook.com
Co-authored-by: Sherlock Huang baihan.huang@gmail.com
Co-authored-by: Alex Zinoviev alexander.zinoviev@me.com
Co-authored-by: Dmitri Smirnov dmitrism@microsoft.com
Summary:
EventListener::OnFlushCompleted() now passes a structure instead
of a list of parameters. This minimizes the API change in the
future.
Test Plan:
listener_test
compact_files_test
example/compact_files_example
Reviewers: kradhakrishnan, sdong, IslamAbdelRahman, rven, igor
Reviewed By: rven, igor
Subscribers: IslamAbdelRahman, rven, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39543
Summary:
Add EventListener::OnTableFileCreated(), which will be called
when a table file is created. This patch is part of the
EventLogger and EventListener integration.
Test Plan: Augment existing test in db/listener_test.cc
Reviewers: anthony, kradhakrishnan, rven, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38865
Summary:
Fixed db_stress by correcting the verification of column family
names in the Listener of db_stress
Test Plan: db_stress
Reviewers: igor, sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39255
Summary: Fixed a compile warning in db_stress in NDEBUG mode.
Test Plan: make OPT=-DNDEBUG db_stress
Reviewers: sdong, anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39213
Summary:
Fixed the following compile warning in db_stress:
error: 'OnCompactionCompleted' overrides a member function but is not marked 'override' [-Werror,-Winconsistent-missing-override]
Test Plan: make db_stress
Reviewers: sdong, igor, anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39207
Summary:
For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit.
After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much.
This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit).
However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions.
Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here.
Reviewers: sdong, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37443
Summary:
This diff contains trivial fixes for 6 scan-build warnings:
**db/c_test.c**
`db` variable is never read. Removed assignment.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-9b77d2.html#EndPath
**db/db_iter.cc**
`skipping` local variable is assigned to false. Then in the next switch block the only "non return" case assign `skipping` to true, the rest cases don't use it and all do return.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-13fca7.html#EndPath
**db/log_reader.cc**
In `bool Reader::SkipToInitialBlock()` `offset_in_block` local variable is assigned to 0 `if (offset_in_block > kBlockSize - 6)` and then never used. Removed the assignment and renamed it to `initial_offset_in_block` to avoid confusion.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-a618dd.html#EndPath
In `bool Reader::ReadRecord(Slice* record, std::string* scratch)` local variable `in_fragmented_record` in switch case `kFullType` block is assigned to false and then does `return` without use. In the other switch case `kFirstType` block the same `in_fragmented_record` is assigned to false, but later assigned to true without prior use. Removed assignment for both cases.
scan-build reprots:
http://home.fburl.com/~sugak/latest20/report-bb86b0.html#EndPathhttp://home.fburl.com/~sugak/latest20/report-a975be.html#EndPath
**table/plain_table_key_coding.cc**
Local variable `user_key_size` is assigned when declared. But then in both places where it is used assigned to `static_cast<uint32_t>(key.size() - 8)`. Changed to initialize the variable to the proper value in declaration.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-9e6b86.html#EndPath
**tools/db_stress.cc**
Missing `break` in switch case block. This seems to be a bug. Added missing `break`.
Test Plan:
Make sure all tests are passing and scan-build does not report 'Dead assignment' and 'Dead initialization' bugs.
```lang=bash
% make check
% make analyze
```
Reviewers: meyering, igor, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33795
