Summary:
memtable_prefix_bloom_probes is not a critical option. Remove it to reduce number of options.
It's easier for users to make mistakes with memtable_prefix_bloom_bits, turn it to memtable_prefix_bloom_bits_ratio
Test Plan: Run all existing tests
Reviewers: yhchiang, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: gunnarku, yoshinorim, MarkCallaghan, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59199
Summary: It is useful to print out IO stats in flush jobs too. Extend options.compaction_measure_io_stats to flush jobs and raname it.
Test Plan: Try db_bench and see the stats are printed out.
Reviewers: yhchiang
Reviewed By: yhchiang
Subscribers: kradhakrishnan, yiwu, IslamAbdelRahman, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56769
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
Test Plan:
'export TEST_TMPDIR=/dev/shm/ && DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32' is OK.
I didn't run the Java tests, I don't have Java set up on my devserver.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56133
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
When the table reader is destroyed, it releases the pinned blocks (if there were any). This has to happen before the cache is destroyed, so I had to introduce a TableReader::Close(), to guarantee the order of destruction.
Test Plan:
Added two unit tests for this. Existing unit tests run fine (default is pin_l0_filter_and_index_blocks_in_cache=false).
DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32
Mac: OK.
Linux: with D55287 patched in it's OK.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54801
Summary: Add a new option to BlockBasedTableOptions that will allow us to change the restart interval for the index block
Test Plan: unit tests
Reviewers: yhchiang, anthony, andrewkr, sdong
Reviewed By: sdong
Subscribers: march, dhruba
Differential Revision: https://reviews.facebook.net/D53721
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
Summary: In MyRocks, it is sometimes important to get propeties only for the subset of the database. This diff implements the API in RocksDB.
Test Plan: ran the GetPropertiesOfTablesInRange
Reviewers: rven, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48651
Summary:
This patch fixes#7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
Summary:
While working on supporting mixing merge operators with
single deletes ( https://reviews.facebook.net/D43179 ),
I realized that returning and dealing with merge results
can be made simpler. Submitting this as a separate diff
because it is not directly related to single deletes.
Before, callers of merge helper had to retrieve the merge
result in one of two ways depending on whether the merge
was successful or not (success = result of merge was single
kTypeValue). For successful merges, the caller could query
the resulting key/value pair and for unsuccessful merges,
the result could be retrieved in the form of two deques of
keys and values. However, with single deletes, a successful merge
does not return a single key/value pair (if merge
operands are merged with a single delete, we have to generate
a value and keep the original single delete around to make
sure that we are not accidentially producing a key overwrite).
In addition, the two existing call sites of the merge
helper were taking the same actions independently from whether
the merge was successful or not, so this patch simplifies that.
Test Plan: make clean all check
Reviewers: rven, sdong, yhchiang, anthony, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43353
Summary: We want to keep Env a think layer for better portability. Less platform dependent codes should be moved out of Env. In this patch, I create a wrapper of file readers and writers, and put rate limiting, write buffering, as well as most perf context instrumentation and random kill out of Env. It will make it easier to maintain multiple Env in the future.
Test Plan: Run all existing unit tests.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42321
Summary:
- New Uint64 comparator
- Modify Reader and Builder to take custom user comparators instead of bytewise comparator
- Modify logic for choosing unused user key in builder
- Modify iterator logic in reader
- test changes
Test Plan:
cuckoo_table_{builder,reader,db}_test
make check all
Reviewers: ljin, sdong
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D22377
Summary:
Change namespace from leveldb to rocksdb. This allows a single
application to link in open-source leveldb code as well as
rocksdb code into the same process.
Test Plan: compile rocksdb
Reviewers: emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13287
Summary:
The default compilation process now uses "-Wall" to compile.
Fix all compilation error generated by gcc.
Test Plan: make all check
Reviewers: heyongqiang, emayanke, sheki
Reviewed By: heyongqiang
CC: MarkCallaghan
Differential Revision: https://reviews.facebook.net/D6525
- Replace raw slice comparison with a call to user comparator.
Added test for custom comparators.
- Fix end of namespace comments.
- Fixed bug in picking inputs for a level-0 compaction.
When finding overlapping files, the covered range may expand
as files are added to the input set. We now correctly expand
the range when this happens instead of continuing to use the
old range. For example, suppose L0 contains files with the
following ranges:
F1: a .. d
F2: c .. g
F3: f .. j
and the initial compaction target is F3. We used to search
for range f..j which yielded {F2,F3}. However we now expand
the range as soon as another file is added. In this case,
when F2 is added, we expand the range to c..j and restart the
search. That picks up file F1 as well.
This change fixes a bug related to deleted keys showing up
incorrectly after a compaction as described in Issue 44.
(Sync with upstream @25072954)
