Summary:
the 50%+ drained constraint wasn't working consistently in some of our test environments, maybe their resources are too low. relax the constraints a bit.
Closes https://github.com/facebook/rocksdb/pull/1970
Differential Revision: D4679419
Pulled By: ajkr
fbshipit-source-id: 3789cd8
Summary:
fix when elapsed time spans non-integral number of intervals since the rate limiter may still be drained during a partial interval.
Closes https://github.com/facebook/rocksdb/pull/1948
Differential Revision: D4651304
Pulled By: ajkr
fbshipit-source-id: b1f9e70
Summary:
This is the metric I plan to use for adaptive rate limiting. The statistics are updated only if the rate limiter is drained by flush or compaction. I believe (but am not certain) that this is the normal case.
The Statistics object is passed in RateLimiter::Request() to avoid requiring changes to client code, which would've been necessary if we passed it in the RateLimiter constructor.
Closes https://github.com/facebook/rocksdb/pull/1946
Differential Revision: D4646489
Pulled By: ajkr
fbshipit-source-id: d8e0161
Summary:
Separate a smal subset of tests in DBTest to DBBasicTest. Tests in DBTest don't have to run in CI tests on platforms like OSX, as long as they are covered by Linux.
Closes https://github.com/facebook/rocksdb/pull/1924
Differential Revision: D4616702
Pulled By: siying
fbshipit-source-id: 13e6549
Summary:
…action
The two options, min_partial_merge_operands and verify_checksums_in_compaction, are not seldom used. Remove them to reduce the total number of options. Also remove them from Java and C interface.
Closes https://github.com/facebook/rocksdb/pull/1902
Differential Revision: D4601219
Pulled By: siying
fbshipit-source-id: aad4cb2
Summary:
The option has been deprecated for two years and has no effect. Removing.
Closes https://github.com/facebook/rocksdb/pull/1866
Differential Revision: D4555203
Pulled By: yiwu-arbug
fbshipit-source-id: c48f627
Summary:
Remove disableDataSync, and another similarly named disable_data_sync options.
This is being done to simplify options, and also because the performance gains of this feature can be achieved by other methods.
Closes https://github.com/facebook/rocksdb/pull/1859
Differential Revision: D4541292
Pulled By: sagar0
fbshipit-source-id: 5b3a6ca
Summary:
introduce new methods into a public threadpool interface,
- allow submission of std::functions as they allow greater flexibility.
- add Joining methods to the implementation to join scheduled and submitted jobs with
an option to cancel jobs that did not start executing.
- Remove ugly `#ifdefs` between pthread and std implementation, make it uniform.
- introduce pimpl for a drop in replacement of the implementation
- Introduce rocksdb::port::Thread typedef which is a replacement for std::thread. On Posix Thread defaults as before std::thread.
- Implement WindowsThread that allocates memory in a more controllable manner than windows std::thread with a replaceable implementation.
- should be no functionality changes.
Closes https://github.com/facebook/rocksdb/pull/1823
Differential Revision: D4492902
Pulled By: siying
fbshipit-source-id: c74cb11
Summary:
Added method that returns approx num of entries as well as size for memtables.
Closes https://github.com/facebook/rocksdb/pull/1841
Differential Revision: D4511990
Pulled By: VitaliyLi
fbshipit-source-id: 9a4576e
Summary:
Added an option to GetApproximateSizes to exclude file stats, as MyRocks has those counted exactly and we need only stats from memtables.
Closes https://github.com/facebook/rocksdb/pull/1787
Differential Revision: D4441111
Pulled By: IslamAbdelRahman
fbshipit-source-id: c11f4c3
Summary:
Enable directIO on WritableFileImpl::Append
with offset being current length of the file.
Enable UniqueID tests on Windows, disable others but
leeting them to compile. Unique tests are valuable to
detect failures on different filesystems and upcoming
ReFS.
Clear output in WinEnv Getchildren.This is different from
previous strategy, do not touch output on failure.
Make sure DBTest.OpenWhenOpen works with windows error message
Closes https://github.com/facebook/rocksdb/pull/1746
Differential Revision: D4385681
Pulled By: IslamAbdelRahman
fbshipit-source-id: c07b702
Summary:
Currently the point lookup values are copied to a string provided by the user.
This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.
Here is the summary for improvements:
1. value 100 byte: 1.8% regular, 1.2% merge values
2. value 1k byte: 11.5% regular, 7.5% merge values
3. value 10k byte: 26% regular, 29.9% merge values
The improvement for merge could be more if we extend this approach to
pin the merge output and delay the full merge operation until the user
actually needs it. We have put that for future work.
PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The difference
is a little and could be noise. More importantly it is safely
cancelled
Closes https://github.com/facebook/rocksdb/pull/1732
Differential Revision: D4374613
Pulled By: maysamyabandeh
fbshipit-source-id: a077f1a
Summary:
Current write stalling system has the problem of lacking of positive feedback if the restricted rate is already too low. Users sometimes stack in very low slowdown value. With the diff, we add a positive feedback (increasing the slowdown value) if we recover from slowdown state back to normal. To avoid the positive feedback to keep the slowdown value to be to high, we add issue a negative feedback every time we are close to the stop condition. Experiments show it is easier to reach a relative balance than before.
Also increase level0_stop_writes_trigger default from 24 to 32. Since level0_slowdown_writes_trigger default is 20, stop trigger 24 only gives four files as the buffer time to slowdown writes. In order to avoid stop in four files while 20 files have been accumulated, the slowdown value must be very low, which is amost the same as stop. It also doesn't give enough time for the slowdown value to converge. Increase it to 32 will smooth out the system.
Closes https://github.com/facebook/rocksdb/pull/1562
Differential Revision: D4218519
Pulled By: siying
fbshipit-source-id: 95e4088
Summary:
If the WriteOptions.no_slowdown flag is set AND we need to wait or sleep for
the write request, then fail immediately with Status::Incomplete().
Closes https://github.com/facebook/rocksdb/pull/1527
Differential Revision: D4191405
Pulled By: maysamyabandeh
fbshipit-source-id: 7f3ce3f
Summary:
Currently the compaction stats are printed to stdout. We want to export the compaction stats in a map format so that the upper layer apps (e.g., MySQL) could present
the stats in any format required by the them.
Closes https://github.com/facebook/rocksdb/pull/1477
Differential Revision: D4149836
Pulled By: maysamyabandeh
fbshipit-source-id: b3df19f
Summary:
The current 10 millisecond waiting for test results may not be sufficient in some test environments. Increase it to 60 seconds and check the results for every 1 milliseond.
Already reviewed: https://reviews.facebook.net/D65457
Closes https://github.com/facebook/rocksdb/pull/1437
Differential Revision: D4099443
Pulled By: siying
fbshipit-source-id: cf1f205
Summary:
The verification condition of the test DBTest.RepeatedWritesToSameKey doesn't hold anymore after 3ce3bb3da2.
Disable the test for now before we find a way to replace it.
Test Plan: Run the test and make sure it is disabled.
Summary:
Changes in the diff
API changes:
- Introduce IngestExternalFile to replace AddFile (I think this make the API more clear)
- Introduce IngestExternalFileOptions (This struct will encapsulate the options for ingesting the external file)
- Deprecate AddFile() API
Logic changes:
- If our file overlap with the memtable we will flush the memtable
- We will find the first level in the LSM tree that our file key range overlap with the keys in it
- We will find the lowest level in the LSM tree above the the level we found in step 2 that our file can fit in and ingest our file in it
- We will assign a global sequence number to our new file
- Remove AddFile restrictions by using global sequence numbers
Other changes:
- Refactor all AddFile logic to be encapsulated in ExternalSstFileIngestionJob
Test Plan:
unit tests (still need to add more)
addfile_stress (https://reviews.facebook.net/D65037)
Reviewers: yiwu, andrewkr, lightmark, yhchiang, sdong
Reviewed By: sdong
Subscribers: jkedgar, hcz, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65061
Summary:
Add new Iterator API, `SeekForPrev`: find the last key that <= target key
support prefix_extractor
support prefix_same_as_start
support upper_bound
not supported in iterators without Prev()
Also add tests in db_iter_test and db_iterator_test
Pass all tests
Cheers!
Test Plan: make all check -j64
Reviewers: andrewkr, yiwu, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64149
Summary: Use ImmutableDBOptions/MutableDBOptions internally and DBOptions only for user-facing APIs. MutableDBOptions is barely a placeholder for now. I'll start to move options to MutableDBOptions in following diffs.
Test Plan:
make all check
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64065
Summary:
ZSTD 1.0.0 is coming. We can finally add a support of ZSTD without worrying about compatibility.
Still keep ZSTDNotFinal for compatibility reason.
Test Plan: Run all tests. Run db_bench with ZSTD version with RocksDB built with ZSTD 1.0 and older.
Reviewers: andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: cyan, igor, IslamAbdelRahman, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63141
* Fix StatsLevel so that kExceptTimeForMutex leaves compression stats enabled and kExceptDetailedTimers disables mutex lock stats. Also change default stats level to kExceptDetailedTimers (disabling both compression and mutex timing).
* Changed order of StatsLevel enum to simplify logic for determining what stats to record.
Summary: To reduce number of options, merge source_compaction_factor, max_grandparent_overlap_bytes and expanded_compaction_factor into max_compaction_bytes.
Test Plan: Add two new unit tests. Run all existing tests, including jtest.
Reviewers: yhchiang, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59829
* Added check_snapshot option in the DB's AddFile function
* change check_snapshot to skip_snapshot_check
* add unit test for skip_snapshot_check
* Add skip_snapshot_check comment
Summary:
DBTest.CompressionStatsTest on non_shm test where the storage device is slow
DBTest.CompressionStatsTest assumes that a flush happens to check the number of compressed blocks.
This is not always true if the Flush is slow, make the test more deterministic by forcing a flush before doing the check
Test Plan: Run the test locally
Reviewers: andrewkr, yiwu, lightmark, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61317
* Added new statistics and refactored to allow ioptions to be passed around as required to access environment and statistics pointers (and, as a convenient side effect, info_log pointer).
* Prevent incrementing compression counter when compression is turned off in options.
* Prevent incrementing compression counter when compression is turned off in options.
* Added two more supported compression types to test code in db_test.cc
* Prevent incrementing compression counter when compression is turned off in options.
* Added new StatsLevel that excludes compression timing.
* Fixed casting error in coding.h
* Fixed CompressionStatsTest for new StatsLevel.
* Removed unused variable that was breaking the Linux build
Summary: Each SST's file size increases after we add more table properties. Threshold in DBTest.DynamicLevelCompressionPerLevel need to adjust accordingly to avoid occasional failures.
Test Plan: Run the test
Reviewers: andrewkr, yiwu
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60819
Summary:
DB::AddFile(std::string file_path) API that allow them to ingest an SST file created using SstFileWriter
We want to update this interface to be able to accept a list of files that will be ingested, DB::AddFile(std::vector<std::string> file_path_list).
Test Plan:
Add test case `AddExternalSstFileList` in `DBSSTTest`. To make sure:
1. files key ranges are not overlapping with each other
2. each file key range dont overlap with the DB key range
3. make sure no snapshots are held
Reviewers: andrewkr, sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D58587
Summary: Add option write_buffer_manager to help users control total memory spent on memtables across multiple DB instances.
Test Plan: Add a new unit test.
Reviewers: yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: adela, benj, sumeet, muthu, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59925
Summary: Backup options file to private directory
Test Plan:
backupable_db_test.cc, BackupOptions
Modify DB options by calling OpenDB for 3 times. Check the latest options file is in the right place. Also check no redundent files are backuped.
Reviewers: andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D59373
Summary:
This is a part of effort to reduce the size of db_test.cc. We move the following tests to a separate file `db_io_failure_test.cc`:
* DropWrites
* DropWritesFlush
* NoSpaceCompactRange
* NonWritableFileSystem
* ManifestWriteError
* PutFailsParanoid
Test Plan: Run `make check` to see if the tests are working properly.
Reviewers: sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58341
Summary: Currently we estimate bytes needed for compaction by assuming fanout value to be level multiplier. It overestimates when size of a level exceeds the target by large. We estimate by the ratio of actual sizes in levels instead.
Test Plan: Fix existing test cases and add a new one.
Reviewers: IslamAbdelRahman, igor, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57789
Summary: Added EventListener::OnTableFileCreationStarted. EventListener::OnTableFileCreated will be called on failure case. User can check creation status via TableFileCreationInfo::status.
Test Plan: unit test.
Reviewers: dhruba, yhchiang, ott, sdong
Reviewed By: sdong
Subscribers: sdong, kradhakrishnan, IslamAbdelRahman, andrewkr, yhchiang, leveldb, ott, dhruba
Differential Revision: https://reviews.facebook.net/D56337
Summary:
This adds a new metablock containing a shared dictionary that is used
to compress all data blocks in the SST file. The size of the shared dictionary
is configurable in CompressionOptions and defaults to 0. It's currently only
used for zlib/lz4/lz4hc, but the block will be stored in the SST regardless of
the compression type if the user chooses a nonzero dictionary size.
During compaction, computes the dictionary by randomly sampling the first
output file in each subcompaction. It pre-computes the intervals to sample
by assuming the output file will have the maximum allowable length. In case
the file is smaller, some of the pre-computed sampling intervals can be beyond
end-of-file, in which case we skip over those samples and the dictionary will
be a bit smaller. After the dictionary is generated using the first file in a
subcompaction, it is loaded into the compression library before writing each
block in each subsequent file of that subcompaction.
On the read path, gets the dictionary from the metablock, if it exists. Then,
loads that dictionary into the compression library before reading each block.
Test Plan: new unit test
Reviewers: yhchiang, IslamAbdelRahman, cyan, sdong
Reviewed By: sdong
Subscribers: andrewkr, yoshinorim, kradhakrishnan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52287
Summary: CompactedDB skips memtable. So we shouldn't use compacted DB if there is outstanding WAL files.
Test Plan: Change to options.max_open_files = -1 perf context test to create a compacted DB, which we shouldn't do.
Reviewers: yhchiang, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57057
Comparable with Snappy on comp ratio.
Implemented using Windows API, does not require external package.
Avaiable since Windows 8 and server 2012.
Use -DXPRESS=1 with CMake to enable.
Summary: In DBTest.HardLimit, multiple flushes may merge into one, based on thread scheduling. Avoid it by waiting each flush to finish before generating the next one.
Test Plan: Run test in parallel several times and see it doesn't fail any more.
Reviewers: yhchiang, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yiwu, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56853
Summary: The code assumes that if use_mmap_reads is on then use_os_buffer is also on. This make sense as by using memory mapped files for reading you are expecting the OS to cache what it needs. Add code to make sure the user does not turn off use_os_buffer when they turn on use_mmap_reads
Test Plan: New test: DBTest.MMapAndBufferOptions
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56397
Summary: Change some RocksDB default options to make it more friendly to server workloads.
Test Plan: Run all existing tests
Reviewers: yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: sumeet, muthu, benj, MarkCallaghan, igor, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55941
Test Plan: make -j40 check OPT=-g, on both /tmp and /dev/shm
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55701
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
When the table reader is destroyed, it releases the pinned blocks (if there were any). This has to happen before the cache is destroyed, so I had to introduce a TableReader::Close(), to guarantee the order of destruction.
Test Plan:
Added two unit tests for this. Existing unit tests run fine (default is pin_l0_filter_and_index_blocks_in_cache=false).
DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32
Mac: OK.
Linux: with D55287 patched in it's OK.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54801
Summary:
In some situations the DB will scan all existing files in the DB path and delete the ones that are Obsolete.
If this happen during adding an external sst file. this could cause the file to be deleted while we are adding it.
This diff fix this issue
Test Plan:
unit test to reproduce the bug
existing unit tests
Reviewers: sdong, yhchiang, andrewkr
Reviewed By: andrewkr
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D54627
Summary:
Add Iterator::GetProperty(), a way for users to communicate with iterator, and turn Iterator::IsKeyPinned() with it.
As a follow-up, I'll ask a property as the version number attached to the iterator
Test Plan: Rerun existing tests and add a negative test case.
Reviewers: yhchiang, andrewkr, kradhakrishnan, anthony, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54783
Summary:
Introude SstFileManager::SetMaxAllowedSpaceUsage() that can be used to limit the maximum space usage allowed for RocksDB.
When this limit is exceeded WriteImpl() will fail and return Status::Aborted()
Test Plan: unit testing
Reviewers: yhchiang, anthony, andrewkr, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53763
Summary:
Add kSstFileTier to ReadTier, which allows Get and MultiGet to
read only directly from SST files and skip mem-tables.
kSstFileTier = 0x2 // data in SST files.
// Note that this ReadTier currently only supports
// Get and MultiGet and does not support iterators.
Test Plan: add new test in db_test.
Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: igor, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53511
Summary: Previous commit introduces a test that is not supported in LITE. Fix it.
Test Plan: Build the test with ROCKSDB_LITE.
Reviewers: kradhakrishnan, IslamAbdelRahman, anthony, yhchiang, andrewkr
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53901
Summary: If users turn on concurrent insert but the memtable doesn't support it, they might see unexcepted crash. Fix it by explicitly fail.
Test Plan:
Run different setting of stress_test and make sure it fails correctly.
Will add a unit test too.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, andrewkr, ngbronson
Reviewed By: ngbronson
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53895
Summary:
copy from task 8196669:
1) Optimistic transactions do not support batching writes from different threads.
2) Pessimistic transactions do not support batching writes if an expiration time is set.
In these 2 cases, we currently do not do any write batching in DBImpl::WriteImpl() because there is a WriteCallback that could decide at the last minute to abort the write. But we could support batching write operations with callbacks if we make sure to process the callbacks correctly.
To do this, we would first need to modify write_thread.cc to stop preventing writes with callbacks from being batched together. Then we would need to change DBImpl::WriteImpl() to call all WriteCallback's in a batch, only write the batches that succeed, and correctly set the state of each batch's WriteThread::Writer.
Test Plan: Added test WriteWithCallbackTest to write_callback_test.cc which creates multiple client threads and verifies that writes are batched and executed properly.
Reviewers: hermanlee4, anthony, ngbronson
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52863
Summary: Add a new option to BlockBasedTableOptions that will allow us to change the restart interval for the index block
Test Plan: unit tests
Reviewers: yhchiang, anthony, andrewkr, sdong
Reviewed By: sdong
Subscribers: march, dhruba
Differential Revision: https://reviews.facebook.net/D53721
Summary:
Add unit tests:
(1) insert entries of 8MB key and 3GB value to DB
(2) insert entry of 3GB key and 3GB value into write batch and make sure we can read it.
(3) insert 3 billions of key-value pairs into write batch and make sure we can read it.
Disable them because not all platform can run it.
Test Plan: Run the tests
Reviewers: IslamAbdelRahman, yhchiang, kradhakrishnan, andrewkr, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53619
Summary:
Add a new class SstFileTracker that will be notified whenever a DB add/delete/move and sst file, it will also replace DeleteScheduler
SstFileTracker can be used later to abort writes when we exceed a specific size
Test Plan: unit tests
Reviewers: rven, anthony, yhchiang, sdong
Reviewed By: sdong
Subscribers: igor, lovro, march, dhruba
Differential Revision: https://reviews.facebook.net/D50469
Summary: Measuring mutex duration will measure time inside DB mutex, which breaks our best practice. Add a stat level in Statistics class. By default, disable to measure the mutex operations.
Test Plan: Add a unit test to make sure it is off by default.
Reviewers: rven, anthony, IslamAbdelRahman, kradhakrishnan, andrewkr, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53367
Summary: Similar to D53385 we need to check InDomain before checking the filter block.
Test Plan: unit tests
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53421
Summary:
NewMemEnv() is defined in rocksdb lite but just returns nullptr --
would it be better to just not define it so we can catch issues like this at
compile-time?
Test Plan:
$ make clean && OPT="-DTRAVIS -DROCKSDB_LITE" V=1 make -j32 db_test
$ ./db_test --gtest_filter='DBTest.MemEnvTest'
...
[ PASSED ] 0 tests.
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53427
Summary:
Right now when we are creating a BlockBasedTable with fill filter block
we add to the filter all the prefixes that are InDomain() based on the prefix_extractor
the problem is that when we read a key from the file, we check the filter block for the prefix whether or not it's InDomain()
Test Plan: unit tests
Reviewers: yhchiang, rven, anthony, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53385
Summary: Break down DBTest.Randomized to multiple gtest tests based on config type
Test Plan: Run the test and all tests. Make sure configurations are correctly set
Reviewers: yhchiang, IslamAbdelRahman, rven, kradhakrishnan, andrewkr, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53247
Summary:
SstFileWriter may create an sst file with no entries
Right now this will fail when being ingested using DB::AddFile() saying that the keys are corrupted
Test Plan: make check
Reviewers: yhchiang, rven, anthony, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D52815
Summary: Improve testing per discussion in D52989
Test Plan: ran test
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53211
Summary:
Moved all the tests that verify property correctness into a separate
file. The goal is to reduce compile time and complexity of db_test. I didn't
add parallelism for db_properties_test, even though these tests were
parallelized in db_test, since the file is small enough that it won't matter.
Some of these moves may be controversial since it's hard to say whether the
test is "verifying property correctness," or "using properties to verify
rocksdb's correctness." I'm interested in any opinions.
Test Plan: ran db_properties_test, also waiting on "make commit-prereq -j32"
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52995
Makefile adjust paths for solaris build
Makefile enable _GLIBCXX_USE_C99 so that std::to_string is available
db_compaction_test.cc Initialise a variable to avoid a compilation error
db_impl.cc Include <alloca.h>
db_test.cc Include <alloca.h>
Environment.java recognise solaris envrionment
options_bulder.cc Make log unambiguous
geodb_impl.cc Make log and floor unambiguous
Summary: Make sure SleepingTask has bene run before it goes out of scope.
Test Plan: run test
Reviewers: kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52581
Summary:
myrocks seems to build rocksdb using
-Wmissing-field-initializers (and treats warnings as errors). This diff
adds that flag to the rocksdb build, and fixes the compilation failures
that result. I have not checked for any other differences in the build
flags for rocksdb build as part of myrocks.
Test Plan: make check
Reviewers: sdong, rven
Reviewed By: rven
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D52443
Summary: DBTest.HardLimit fails in appveyor build. Use special mem table to make the test behavior depends less on platform
Test Plan: Run the test with JEMALLOC both on and off.
Reviewers: yhchiang, kradhakrishnan, rven, anthony, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52317
Summary: DBTest.DelayedWriteRate has sign and unsign comparisons that break Windows build. Fix it.
Test Plan: Build and run the test modified.
Reviewers: IslamAbdelRahman, rven, anthony, yhchiang, kradhakrishnan
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52311
Summary: It's usually hard for users to set a value of options.delayed_write_rate. With this diff, after slowdown condition triggers, we greedily reduce write rate if estimated pending compaction bytes increase. If estimated compaction pending bytes drop, we increase the write rate.
Test Plan:
Add a unit test
Test with db_bench setting:
TEST_TMPDIR=/dev/shm/ ./db_bench --benchmarks=fillrandom -num=10000000 --soft_pending_compaction_bytes_limit=1000000000 --hard_pending_compaction_bytes_limit=3000000000 --delayed_write_rate=100000000
and make sure without the commit, write stop will happen, but with the commit, it will not happen.
Reviewers: igor, anthony, rven, yhchiang, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52131
Summary:
Missed this in https://reviews.facebook.net/D51633 because I didn't
wait for 'make commit-prereq' to finish
Test Plan: make clean && USE_CLANG=1 make -j32 all
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52275
Summary:
When Get() or NewIterator() trigger file loads, skip caching the filter block if
(1) optimize_filters_for_hits is set and (2) the file is on the bottommost
level. Also skip checking filters under the same conditions, which means that
for a preloaded file or a file that was trivially-moved to the bottom level, its
filter block will eventually expire from the cache.
- added parameters/instance variables in various places in order to propagate the config ("skip_filters") from version_set to block_based_table_reader
- in BlockBasedTable::Rep, this optimization prevents filter from being loaded when the file is opened simply by setting filter_policy = nullptr
- in BlockBasedTable::Get/BlockBasedTable::NewIterator, this optimization prevents filter from being used (even if it was loaded already) by setting filter = nullptr
Test Plan:
updated unit test:
$ ./db_test --gtest_filter=DBTest.OptimizeFiltersForHits
will also run 'make check'
Reviewers: sdong, igor, paultuckfield, anthony, rven, kradhakrishnan, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D51633
Summary: Now if inserting to mem table is much faster than writing to files, there is no mechanism users can rely on to avoid stopping for reaching options.max_write_buffer_number. With the commit, if there are more than four maximum write buffers configured, we slow down to the rate of options.delayed_write_rate while we reach the last one.
Test Plan:
1. Add a new unit test.
2. Run db_bench with
./db_bench --benchmarks=fillrandom --num=10000000 --max_background_flushes=6 --batch_size=32 -max_write_buffer_number=4 --delayed_write_rate=500000 --statistics
based on hard drive and see stopping is avoided with the commit.
Reviewers: yhchiang, IslamAbdelRahman, anthony, rven, kradhakrishnan, igor
Reviewed By: igor
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52047
Summary:
This patch update the Iterator API to introduce new functions that allow users to keep the Slices returned by key() valid as long as the Iterator is not deleted
ReadOptions::pin_data : If true keep loaded blocks in memory as long as the iterator is not deleted
Iterator::IsKeyPinned() : If true, this mean that the Slice returned by key() is valid as long as the iterator is not deleted
Also add a new option BlockBasedTableOptions::use_delta_encoding to allow users to disable delta_encoding if needed.
Benchmark results (using https://phabricator.fb.com/P20083553)
```
// $ du -h /home/tec/local/normal.4K.Snappy/db10077
// 6.1G /home/tec/local/normal.4K.Snappy/db10077
// $ du -h /home/tec/local/zero.8K.LZ4/db10077
// 6.4G /home/tec/local/zero.8K.LZ4/db10077
// Benchmarks for shard db10077
// _build/opt/rocks/benchmark/rocks_copy_benchmark \
// --normal_db_path="/home/tec/local/normal.4K.Snappy/db10077" \
// --zero_db_path="/home/tec/local/zero.8K.LZ4/db10077"
// First run
// ============================================================================
// rocks/benchmark/RocksCopyBenchmark.cpp relative time/iter iters/s
// ============================================================================
// BM_StringCopy 1.73s 576.97m
// BM_StringPiece 103.74% 1.67s 598.55m
// ============================================================================
// Match rate : 1000000 / 1000000
// Second run
// ============================================================================
// rocks/benchmark/RocksCopyBenchmark.cpp relative time/iter iters/s
// ============================================================================
// BM_StringCopy 611.99ms 1.63
// BM_StringPiece 203.76% 300.35ms 3.33
// ============================================================================
// Match rate : 1000000 / 1000000
```
Test Plan: Unit tests
Reviewers: sdong, igor, anthony, yhchiang, rven
Reviewed By: rven
Subscribers: dhruba, lovro, adsharma
Differential Revision: https://reviews.facebook.net/D48999
Summary:
List of changes:
1) Fix the snprintf() usage in cases where wrong variable was used to determine the output buffer size.
2) Remove unnecessary checks before calling delete operator.
3) Increase code correctness by using size_t type when getting vector's size.
4) Unify the coding style by removing namespace::std usage at the top of the file to confirm to the majority usage.
5) Fix various lint errors pointed out by 'arc lint'.
Test Plan:
Code review and build:
git diff
make clean
make -j 32 commit-prereq
arc lint
Reviewers: kradhakrishnan, sdong, rven, anthony, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51849
Summary:
This diff provides a framework for doing manual
compactions in parallel with other compactions. We now have a deque of manual compactions. We also pass manual compactions as an argument from RunManualCompactions down to
BackgroundCompactions, so that RunManualCompactions can be reentrant.
Parallelism is controlled by the two routines
ConflictingManualCompaction to allow/disallow new parallel/manual
compactions based on already existing ManualCompactions. In this diff, by default manual compactions still have to run exclusive of other compactions. However, by setting the compaction option, exclusive_manual_compaction to false, it is possible to run other compactions in parallel with a manual compaction. However, we are still restricted to one manual compaction per column family at a time. All of these restrictions will be relaxed in future diffs.
I will be adding more tests later.
Test Plan: Rocksdb regression + new tests + valgrind
Reviewers: igor, anthony, IslamAbdelRahman, kradhakrishnan, yhchiang, sdong
Reviewed By: sdong
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47973
Summary: Deprecate options.soft_rate_limit, which is hard to tune, with options.soft_pending_compaction_bytes_limit, which would trigger the slowdown if estimated pending compaction bytes exceeds the threshold. The hope is to make it more striaght-forward to tune.
Test Plan: Modify DBTest.SoftLimit to cover options.soft_pending_compaction_bytes_limit instead; run all unit tests.
Reviewers: IslamAbdelRahman, yhchiang, rven, kradhakrishnan, igor, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51117
Summary: DBTest.DynamicCompactionOptions ocasionally fails during valgrind run. We sent a sleeping task to block compaction thread pool but we don't wait it to run.
Test Plan: Run the test multiple times in an environment which can cause failure.
Reviewers: rven, kradhakrishnan, igor, IslamAbdelRahman, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51687
Summary:
Fixes T8781168.
Added a new function EnableAutoCompactions in db.h to be publicly
avialable. This allows compaction to be re-enabled after disabling it via
SetOptions
Refactored code to set the dbptr earlier on in TransactionDB::Open and DB::Open
Temporarily disable auto_compaction in TransactionDB::Open until dbptr is set to
prevent race condition.
Test Plan:
Ran make all check
verified fix on myrocks side:
was able to reproduce the seg fault with
../tools/mysqltest.sh --mem --force rocksdb.drop_table
method was to manually sleep the thread after DB::Open but before TransactionDB ptr was
assigned in transaction_db_impl.cc:
DB::Open(db_options, dbname, column_families_copy, handles, &db);
clock_t goal = (60000 * 10) + clock();
while (goal > clock());
...dbptr(aka rdb) gets assigned below
verified my changes fixed the issue.
Also added unit test 'ToggleAutoCompaction' in transaction_test.cc
Reviewers: hermanlee4, anthony
Reviewed By: anthony
Subscribers: alex, dhruba
Differential Revision: https://reviews.facebook.net/D51147
Summary: Verifiction condition of DBTest.SuggestCompactRangeTest is too strict. Based on key distribution, we might have more small files in last level. Not check number of files in the last level.
Test Plan: Run DBTest.SuggestCompactRangeTest with both of jemalloc on and off.
Reviewers: rven, IslamAbdelRahman, yhchiang, kradhakrishnan, igor, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51501
Summary: DBTest.DynamicCompactionOptions sometimes fails the assert but I can't repro it locally. Make it more deterministic and readable and see whether the problem is still there.
Test Plan: Run tht test and make sure it passes
Reviewers: kradhakrishnan, yhchiang, igor, rven, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51309
Summary: DBTest.SuggestCompactRangeTest fails for the case when jemalloc is disabled, including ASAN and valgrind builds. It is caused by the improvement of skip list, which allocates different size of nodes for a new records. Fix it by using a special mem table that triggers a flush by number of entries. In that way the behavior will be consistent for all allocators.
Test Plan: Run the test with both of DISABLE_JEMALLOC=1 and 0
Reviewers: anthony, rven, yhchiang, kradhakrishnan, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51423
Summary: When option.db_write_buffer_size is hit, we currently flush all column families. Move to flush the column family with the largest active memt table instead. In this way, we can avoid too many small files in some cases.
Test Plan: Modify test DBTest.SharedWriteBuffer to work with the updated behavior
Reviewers: kradhakrishnan, yhchiang, rven, anthony, IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: march, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51291
Summary: Now DBIter::Next() always compares with current key with itself first, which is unnecessary if the last key is not a merge key. I made the change and didn't see db_iter_test fails. Want to hear whether people have any idea what I miss.
Test Plan: Run all unit tests
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48279
Summary:
This diff completes the creation of InlineSkipList<Cmp>, which is like
SkipList<const char*, Cmp> but it always allocates the key contiguously
with the node. This allows us to remove the pointer from the node
to the key. As a result the memory usage of the skip list is reduced
(by 1 to sizeof(void*) bytes depending on the padding required to align
the key storage), cache locality is improved, and we halve the number
of calls to the allocator.
For skip lists whose keys are freshly-allocated const char*,
InlineSkipList is stricly preferrable to SkipList. This diff doesn't
replace SkipList, however, because some of the use cases of SkipList in
RocksDB are either character sequences that are not allocated at the
same time as the skip list node allocation (for example
hash_linklist_rep) or have different key types (for example
write_batch_with_index). Taking advantage of inline allocation for
those cases is left to future work.
The perf win is biggest for small values. For single-threaded CPU-bound
(32M fillrandom operations with no WAL log) with 16 byte keys and 0 byte
values, the db_bench perf goes from ~310k ops/sec to ~410k ops/sec. For
large values the improvement is less pronounced, but seems to be between
5% and 10% on the same configuration.
Test Plan: make check
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D51123
* conversion from 'size_t' to 'type', by add static_cast
Tested:
* by build solution on Windows, Linux locally,
* run tests
* build CI system successful
Summary: DBTest.DynamicLevelCompressionPerLevel2 sometimes fails during valgrind runs. This causes our valgrind tests to fail. Not sure what the best fix is for this test, but hopefully this simple change is sufficient.
Test Plan: run test
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51111
Summary: DBTest.MergeTestTime is a test verifying timing counters. Depending on real time may cause non-determinstic results. Change to fake time to be determinsitic.
Test Plan: Run the test and make sure it passes
Reviewers: yhchiang, anthony, rven, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D50883
Summary: Timing counters' upper bounds depend on platform. It frequently fails in valgrind runs. Relax the upper bound.
Test Plan: Run the same valgrind test and make sure it passes.
Reviewers: rven, anthony, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D50829
Summary:
This patch adds GetAggregatedIntProperty() that returns the aggregated
value from all CFs
Test Plan: Added a test in db_test
Reviewers: igor, sdong, anthony, IslamAbdelRahman, rven
Reviewed By: rven
Subscribers: rven, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49497
Summary:
Update DB::AddFile() restrictions to be
- Key range in loaded table file don't overlap with existing keys or tombstones in DB.
- No other writes happen during AddFile call.
The updated AddFile() will verify that the file key range don't overlap with any keys or tombstones in the DB, and then add the file to L0
Test Plan: unit tests
Reviewers: igor, rven, anthony, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: adsharma, ameyag, dhruba
Differential Revision: https://reviews.facebook.net/D49233
Summary: Run "make format" for some recent commits.
Test Plan: Build and run tests
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D49707
Summary: As above.
Test Plan: USE_CLANG=1 make check -j
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48981
When we recycle log files, we need to mix the log number into the CRC
for each record. Note that for logs that don't get recycled (like the
manifest), we always pass a log_number of 0 and false.
Signed-off-by: Sage Weil <sage@redhat.com>
Summary: In MyRocks, it is sometimes important to get propeties only for the subset of the database. This diff implements the API in RocksDB.
Test Plan: ran the GetPropertiesOfTablesInRange
Reviewers: rven, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48651
Summary:
Add rocksdb.num-running-compactions and rocksdb.num-running-flushes
to GetIntProperty() that reports the number of currently running
compactions / flushes.
Test Plan: augmented existing tests in db_test
Reviewers: igor, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48693
Summary:
We are cleaning up dependencies.
This diff takes a first step at moving memtable files to their own
directory called memtable. In future diffs, we will move other memtable
files from db to memtable.
Test Plan: make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48915
Summary:
This diff exclude alot of tests in db_test that are not compiling / failing under ROCKSD_LITE
Test Plan:
OPT=-DROCKSDB_LITE make check -j64
make check -j64
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48771
Summary:
Two fixes:
1. Wait compaction after generating each L0 file so that we are sure there are one L0 file left.
2. https://reviews.facebook.net/D48423 increased from 500 keys to 700 keys but in verification phase we are still querying the first 500 keys. It is a bug to fix.
Test Plan: Run the test in the same environment that fails by chance of one in tens of times. It doesn't fail after 1000 times.
Reviewers: yhchiang, IslamAbdelRahman, igor, rven, kradhakrishnan
Reviewed By: rven, kradhakrishnan
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48759
Summary:
Separate a new class InternalIterator from class Iterator, when the look-up is done internally, which also means they operate on key with sequence ID and type.
This change will enable potential future optimizations but for now InternalIterator's functions are still the same as Iterator's.
At the same time, separate the cleanup function to a separate class and let both of InternalIterator and Iterator inherit from it.
Test Plan: Run all existing tests.
Reviewers: igor, yhchiang, anthony, kradhakrishnan, IslamAbdelRahman, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48549
Summary:
As part of tech debt week, we are cleaning up dependencies.
This diff moves db_test_util.[h,cc] from util to db directory.
Test Plan: make check
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48543
Summary: Pass column family ID through TablePropertiesCollectorFactory::CreateTablePropertiesCollector() so that users can identify which column family this file is for and handle it differently.
Test Plan: Add unit test scenarios in tests related to table properties collectors to verify the information passed in is correct.
Reviewers: rven, yhchiang, anthony, kradhakrishnan, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48411
Summary: Now based on environment, DBTest.AggregatedTableProperties has a possibility of issuing a L0->L1 compaction after reopening and the results are not what we expected. We tune the L0 compaction trigger to make it less likely to happen.
Test Plan: I can't repro the failure but I think the change is better. Just run the test and make sure it passes.
Reviewers: kradhakrishnan, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48423
Summary: With this commit, we add a new format in manifest when adding a new file. Now path ID and need-compaction hint are first two customized fields.
Test Plan: Add a test case in version_edit_test to verify the encoding and decoding logic. Add a unit test in db_test to verify need compaction is persistent after DB restarting.
Reviewers: kradhakrishnan, anthony, IslamAbdelRahman, yhchiang, rven, igor
Reviewed By: igor
Subscribers: javigon, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48123
Summary:
hit and miss bloom filter stats for memtable and SST
stats added to perf_context struct
key matches and prefix matches combined into one stat
Test Plan: unit test veryfing the functionality added, see BloomStatsTest in db_test.cc for details
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47859
Summary:
Handle SST files with both ".sst" and ".ldb" suffix.
This enables user to migrate from leveldb to rocksdb.
Test Plan:
Added unit test with DB operating on SSTs with names schema.
See db/dc_test.cc:SSTsWithLdbSuffixHandling for details
Reviewers: yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48003
Summary:
To support a new MongoDB capability, we need to make sure that we don't do any IO for a short period of time. For background, see:
* https://jira.mongodb.org/browse/SERVER-20704
* https://jira.mongodb.org/browse/SERVER-18899
To implement that, I add a new API calls PauseBackgroundWork() and ContinueBackgroundWork() which reuse the capability we already have in place for RefitLevel() function.
Test Plan: Added a new test in db_test. Made sure that test fails when PauseBackgroundWork() is commented out.
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47901