Commit Graph

278 Commits

Author SHA1 Message Date
Siying Dong
d59549298f Skip deleted WALs during recovery
Summary:
This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.

Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction)

This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2.
Closes https://github.com/facebook/rocksdb/pull/3765

Differential Revision: D7747618

Pulled By: siying

fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
2018-05-03 15:43:09 -07:00
Siying Dong
d5afa73789 Revert "Skip deleted WALs during recovery"
Summary:
This reverts commit 73f21a7b21.

It breaks compatibility. When created a DB using a build with this new change, opening the DB and reading the data will fail with this error:

"Corruption: Can't access /000000.sst: IO error: while stat a file for size: /tmp/xxxx/000000.sst: No such file or directory"

This is because the dummy AddFile4 entry generated by the new code will be treated as a real entry by an older build. The older build will think there is a real file with number 0, but there isn't such a file.
Closes https://github.com/facebook/rocksdb/pull/3762

Differential Revision: D7730035

Pulled By: siying

fbshipit-source-id: f2051859eff20ef1837575ecb1e1bb96b3751e77
2018-04-23 12:01:26 -07:00
Phani Shekhar Mantripragada
446b32cfc3 Support for Column family specific paths.
Summary:
In this change, an option to set different paths for different column families is added.
This option is set via cf_paths setting of ColumnFamilyOptions. This option will work in a similar fashion to db_paths setting. Cf_paths is a vector of Dbpath values which contains a pair of the absolute path and target size. Multiple levels in a Column family can go to different paths if cf_paths has more than one path.
To maintain backward compatibility, if cf_paths is not specified for a column family, db_paths setting will be used. Note that, if db_paths setting is also not specified, RocksDB already has code to use db_name as the only path.

Changes :
1) A new member "cf_paths" is added to ImmutableCfOptions. This is set, based on cf_paths setting of ColumnFamilyOptions and db_paths setting of ImmutableDbOptions.  This member is used to identify the path information whenever files are accessed.
2) Validation checks are added for cf_paths setting based on existing checks for db_paths setting.
3) DestroyDB, PurgeObsoleteFiles etc. are edited to support multiple cf_paths.
4) Unit tests are added appropriately.
Closes https://github.com/facebook/rocksdb/pull/3102

Differential Revision: D6951697

Pulled By: ajkr

fbshipit-source-id: 60d2262862b0a8fd6605b09ccb0da32bb331787d
2018-04-05 19:58:20 -07:00
Sagar Vemuri
04c11b867d Level Compaction with TTL
Summary:
Level Compaction with TTL.

As of today, a file could exist in the LSM tree without going through the compaction process for a really long time if there are no updates to the data in the file's key range. For example, in certain use cases, the keys are not actually "deleted"; instead they are just set to empty values. There might not be any more writes to this "deleted" key range, and if so, such data could remain in the LSM for a really long time resulting in wasted space.

Introducing a TTL could solve this problem. Files (and, in turn, data) older than TTL will be scheduled for compaction when there is no other background work. This will make the data go through the regular compaction process and get rid of old unwanted data.
This also has the (good) side-effect of all the data in the non-bottommost level being newer than ttl, and all data in the bottommost level older than ttl. It could lead to more writes while reducing space.

This functionality can be controlled by the newly introduced column family option -- ttl.

TODO for later:
- Make ttl mutable
- Extend TTL to Universal compaction as well? (TTL is already supported in FIFO)
- Maybe deprecate CompactionOptionsFIFO.ttl in favor of this new ttl option.
Closes https://github.com/facebook/rocksdb/pull/3591

Differential Revision: D7275442

Pulled By: sagar0

fbshipit-source-id: dcba484717341200d419b0953dafcdf9eb2f0267
2018-04-02 22:14:28 -07:00
Maysam Yabandeh
73f21a7b21 Skip deleted WALs during recovery
Summary:
This patch record the deleted WAL numbers in the manifest to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Closes https://github.com/facebook/rocksdb/pull/3488

Differential Revision: D6967893

Pulled By: maysamyabandeh

fbshipit-source-id: 13119feb155a08ab6d4909f437c7a750480dc8a1
2018-03-30 11:28:05 -07:00
Huachao Huang
ecfca1ff59 Optimize overlap checking for external file ingestion
Summary:
If there are a lot of overlapped files in L0, creating a merging iterator for
all files in L0 to check overlap can be very slow because we need to read and
seek all files in L0. However, in that case, the ingested file is likely to
overlap with some files in L0, so if we check those files one by one, we can stop
once we encounter overlap.

Ref: https://github.com/facebook/rocksdb/issues/3540
Closes https://github.com/facebook/rocksdb/pull/3564

Differential Revision: D7196784

Pulled By: anand1976

fbshipit-source-id: 8700c1e903bd515d0fa7005b6ce9b3a3d9db2d67
2018-03-16 10:43:17 -07:00
Bruce Mitchener
a3a3f5497c Fix some typos in comments and docs.
Summary: Closes https://github.com/facebook/rocksdb/pull/3568

Differential Revision: D7170953

Pulled By: siying

fbshipit-source-id: 9cfb8dd88b7266da920c0e0c1e10fb2c5af0641c
2018-03-08 10:27:25 -08:00
Andrew Kryczka
5d68243e61 Comment out unused variables
Summary:
Submitting on behalf of another employee.
Closes https://github.com/facebook/rocksdb/pull/3557

Differential Revision: D7146025

Pulled By: ajkr

fbshipit-source-id: 495ca5db5beec3789e671e26f78170957704e77e
2018-03-05 13:13:41 -08:00
Yi Wu
bf937cf15b Add "rocksdb.live-sst-files-size" DB property
Summary:
Add "rocksdb.live-sst-files-size" DB property which only include files of latest version. Existing "rocksdb.total-sst-files-size" include files from all versions and thus include files that's obsolete but not yet deleted. I'm going to use this new property to cap blob db sst + blob files size.
Closes https://github.com/facebook/rocksdb/pull/3548

Differential Revision: D7116939

Pulled By: yiwu-arbug

fbshipit-source-id: c6a52e45ce0f24ef78708156e1a923c1dd6bc79a
2018-03-01 18:01:10 -08:00
Igor Sugak
aba3409740 Back out "[codemod] - comment out unused parameters"
Reviewed By: igorsugak

fbshipit-source-id: 4a93675cc1931089ddd574cacdb15d228b1e5f37
2018-02-22 12:43:17 -08:00
David Lai
f4a030ce81 - comment out unused parameters
Reviewed By: everiq, igorsugak

Differential Revision: D7046710

fbshipit-source-id: 8e10b1f1e2aecebbfb229c742e214db887e5a461
2018-02-22 09:44:23 -08:00
Maysam Yabandeh
18dcf7f98d WritePrepared Txn: PreReleaseCallback
Summary:
Add PreReleaseCallback to be called at the end of WriteImpl but before publishing the sequence number. The callback is used in WritePrepareTxn to i) update the commit map, ii) update the last published sequence number in the 2nd write queue. It also ensures that all the commits will go to the 2nd queue.
These changes will ensure that the commit map is updated before the sequence number is published and used by reading snapshots. If we use two write queues, the snapshots will use the seq number published by the 2nd queue. If we use one write queue (the default, the snapshots will use the last seq number in the memtable, which also indicates the last published seq number.
Closes https://github.com/facebook/rocksdb/pull/3205

Differential Revision: D6438959

Pulled By: maysamyabandeh

fbshipit-source-id: f8b6c434e94bc5f5ab9cb696879d4c23e2577ab9
2017-11-30 23:50:45 -08:00
Andrew Kryczka
1bdb44de95 optimize file ingestion checks for range deletion overlap
Summary:
Before we were checking every file in the level which was unnecessary. We can piggyback onto the code for checking point-key overlap, which already opens all the files that could possibly contain overlapping range deletions. This PR makes us check just the range deletions from those files, so no extra ones will be opened.
Closes https://github.com/facebook/rocksdb/pull/3179

Differential Revision: D6358125

Pulled By: ajkr

fbshipit-source-id: 00e200770fdb8f3cc6b1b2da232b755e4ba36279
2017-11-28 11:27:02 -08:00
Zhongyi Xie
32e31d49d1 Make DBOption compaction_readahead_size dynamic
Summary: Closes https://github.com/facebook/rocksdb/pull/3004

Differential Revision: D6056141

Pulled By: miasantreble

fbshipit-source-id: 56df1630f464fd56b07d25d38161f699e0528b7f
2017-11-16 17:57:25 -08:00
Maysam Yabandeh
857adf388f WritePrepared Txn: Refactor conf params
Summary:
Summary of changes:
- Move seq_per_batch out of Options
- Rename concurrent_prepare to two_write_queues
- Add allocate_seq_only_for_data_
Closes https://github.com/facebook/rocksdb/pull/3136

Differential Revision: D6304458

Pulled By: maysamyabandeh

fbshipit-source-id: 08e685bfa82bbc41b5b1c5eb7040a8ca6e05e58c
2017-11-10 17:28:12 -08:00
Shaohua Li
33c7d4ccd9 Make writable_file_max_buffer_size dynamic
Summary:
The DBOptions::writable_file_max_buffer_size can be changed dynamically.
Closes https://github.com/facebook/rocksdb/pull/3053

Differential Revision: D6152720

Pulled By: shligit

fbshipit-source-id: aa0c0cfcfae6a54eb17faadb148d904797c68681
2017-10-31 13:56:35 -07:00
Andrew Kryczka
9b18cc2363 single-file bottom-level compaction when snapshot released
Summary:
When snapshots are held for a long time, files may reach the bottom level containing overwritten/deleted keys. We previously had no mechanism to trigger compaction on such files. This particularly impacted DBs that write to different parts of the keyspace over time, as such files would never be naturally compacted due to second-last level files moving down. This PR introduces a mechanism for bottommost files to be recompacted upon releasing all snapshots that prevent them from dropping their deleted/overwritten keys.

- Changed `CompactionPicker` to compact files in `BottommostFilesMarkedForCompaction()`. These are the last choice when picking. Each file will be compacted alone and output to the same level in which it originated. The goal of this type of compaction is to rewrite the data excluding deleted/overwritten keys.
- Changed `ReleaseSnapshot()` to recompute the bottom files marked for compaction when the oldest existing snapshot changes, and schedule a compaction if needed. We cache the value that oldest existing snapshot needs to exceed in order for another file to be marked in `bottommost_files_mark_threshold_`, which allows us to avoid recomputing marked files for most snapshot releases.
- Changed `VersionStorageInfo` to track the list of bottommost files, which is recomputed every time the version changes by `UpdateBottommostFiles()`. The list of marked bottommost files is first computed in `ComputeBottommostFilesMarkedForCompaction()` when the version changes, but may also be recomputed when `ReleaseSnapshot()` is called.
- Extracted core logic of `Compaction::IsBottommostLevel()` into `VersionStorageInfo::RangeMightExistAfterSortedRun()` since logic to check whether a file is bottommost is now necessary outside of compaction.
Closes https://github.com/facebook/rocksdb/pull/3009

Differential Revision: D6062044

Pulled By: ajkr

fbshipit-source-id: 123d201cf140715a7d5928e8b3cb4f9cd9f7ad21
2017-10-25 16:30:37 -07:00
Andrew Kryczka
70aa942153 fix file numbers after repair
Summary:
The file numbers assigned post-repair were sometimes smaller than older files' numbers due to `LogAndApply` saving the wrong next file number in the manifest.

- Mark the highest file seen during repair as used before `LogAndApply` so the correct next file number will be stored.
- Renamed `MarkFileNumberUsedDuringRecovery` to `MarkFileNumberUsed` since now it's used during repair in addition to during recovery
- Added `TEST_Current_Next_FileNo` to expose the next file number for the unit test.
Closes https://github.com/facebook/rocksdb/pull/2988

Differential Revision: D6018083

Pulled By: ajkr

fbshipit-source-id: 3f25cbf74439cb8f16dd12af90b67f9f9f75e718
2017-10-10 13:12:37 -07:00
Yi Wu
d1cab2b64e Add ValueType::kTypeBlobIndex
Summary:
Add kTypeBlobIndex value type, which will be used by blob db only, to insert a (key, blob_offset) KV pair. The purpose is to
1. Make it possible to open existing rocksdb instance as blob db. Existing value will be of kTypeIndex type, while value inserted by blob db will be of kTypeBlobIndex.
2. Make rocksdb able to detect if the db contains value written by blob db, if so return error.
3. Make it possible to have blob db optionally store value in SST file (with kTypeValue type) or as a blob value (with kTypeBlobIndex type).

The root db (DBImpl) basically pretended kTypeBlobIndex are normal value on write. On Get if is_blob is provided, return whether the value read is of kTypeBlobIndex type, or return Status::NotSupported() status if is_blob is not provided. On scan allow_blob flag is pass and if the flag is true, return wether the value is of kTypeBlobIndex type via iter->IsBlob().

Changes on blob db side will be in a separate patch.
Closes https://github.com/facebook/rocksdb/pull/2886

Differential Revision: D5838431

Pulled By: yiwu-arbug

fbshipit-source-id: 3c5306c62bc13bb11abc03422ec5cbcea1203cca
2017-10-03 09:11:23 -07:00
Maysam Yabandeh
f46464d383 write-prepared txn: call IsInSnapshot
Summary:
This patch instruments the read path to verify each read value against an optional ReadCallback class. If the value is rejected, the reader moves on to the next value. The WritePreparedTxn makes use of this feature to skip sequence numbers that are not in the read snapshot.
Closes https://github.com/facebook/rocksdb/pull/2850

Differential Revision: D5787375

Pulled By: maysamyabandeh

fbshipit-source-id: 49d808b3062ab35e7ae98ad388f659757794184c
2017-09-11 09:14:48 -07:00
Andrew Kryczka
cc01985db0 Introduce bottom-pri thread pool for large universal compactions
Summary:
When we had a single thread pool for compactions, a thread could be busy for a long time (minutes) executing a compaction involving the bottom level. In multi-instance setups, the entire thread pool could be consumed by such bottom-level compactions. Then, top-level compactions (e.g., a few L0 files) would be blocked for a long time ("head-of-line blocking"). Such top-level compactions are critical to prevent compaction stalls as they can quickly reduce number of L0 files / sorted runs.

This diff introduces a bottom-priority queue for universal compactions including the bottom level. This alleviates the head-of-line blocking situation for fast, top-level compactions.

- Added `Env::Priority::BOTTOM` thread pool. This feature is only enabled if user explicitly configures it to have a positive number of threads.
- Changed `ThreadPoolImpl`'s default thread limit from one to zero. This change is invisible to users as we call `IncBackgroundThreadsIfNeeded` on the low-pri/high-pri pools during `DB::Open` with values of at least one. It is necessary, though, for bottom-pri to start with zero threads so the feature is disabled by default.
- Separated `ManualCompaction` into two parts in `PrepickedCompaction`. `PrepickedCompaction` is used for any compaction that's picked outside of its execution thread, either manual or automatic.
- Forward universal compactions involving last level to the bottom pool (worker thread's entry point is `BGWorkBottomCompaction`).
- Track `bg_bottom_compaction_scheduled_` so we can wait for bottom-level compactions to finish. We don't count them against the background jobs limits. So users of this feature will get an extra compaction for free.
Closes https://github.com/facebook/rocksdb/pull/2580

Differential Revision: D5422916

Pulled By: ajkr

fbshipit-source-id: a74bd11f1ea4933df3739b16808bb21fcd512333
2017-08-03 15:43:29 -07:00
Sagar Vemuri
72502cf227 Revert "comment out unused parameters"
Summary:
This reverts the previous commit 1d7048c598, which broke the build.

Did a `git revert 1d7048c`.
Closes https://github.com/facebook/rocksdb/pull/2627

Differential Revision: D5476473

Pulled By: sagar0

fbshipit-source-id: 4756ff5c0dfc88c17eceb00e02c36176de728d06
2017-07-21 18:26:26 -07:00
Victor Gao
1d7048c598 comment out unused parameters
Summary: This uses `clang-tidy` to comment out unused parameters (in functions, methods and lambdas) in fbcode. Cases that the tool failed to handle are fixed manually.

Reviewed By: igorsugak

Differential Revision: D5454343

fbshipit-source-id: 5dee339b4334e25e963891b519a5aa81fbf627b2
2017-07-21 14:57:44 -07:00
Siying Dong
3c327ac2d0 Change RocksDB License
Summary: Closes https://github.com/facebook/rocksdb/pull/2589

Differential Revision: D5431502

Pulled By: siying

fbshipit-source-id: 8ebf8c87883daa9daa54b2303d11ce01ab1f6f75
2017-07-15 16:11:23 -07:00
Maysam Yabandeh
499ebb3ab5 Optimize for serial commits in 2PC
Summary:
Throughput: 46k tps in our sysbench settings (filling the details later)

The idea is to have the simplest change that gives us a reasonable boost
in 2PC throughput.

Major design changes:
1. The WAL file internal buffer is not flushed after each write. Instead
it is flushed before critical operations (WAL copy via fs) or when
FlushWAL is called by MySQL. Flushing the WAL buffer is also protected
via mutex_.
2. Use two sequence numbers: last seq, and last seq for write. Last seq
is the last visible sequence number for reads. Last seq for write is the
next sequence number that should be used to write to WAL/memtable. This
allows to have a memtable write be in parallel to WAL writes.
3. BatchGroup is not used for writes. This means that we can have
parallel writers which changes a major assumption in the code base. To
accommodate for that i) allow only 1 WriteImpl that intends to write to
memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes
come via group commit phase which is serial anyway, ii) make all the
parts in the code base that assumed to be the only writer (via
EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are
protected via a stat_mutex_.

Note: the first commit has the approach figured out but is not clean.
Submitting the PR anyway to get the early feedback on the approach. If
we are ok with the approach I will go ahead with this updates:
0) Rebase with Yi's pipelining changes
1) Currently batching is disabled by default to make sure that it will be
consistent with all unit tests. Will make this optional via a config.
2) A couple of unit tests are disabled. They need to be updated with the
serial commit of 2PC taken into account.
3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires
releasing mutex_ beforehand (the same way EnterUnbatched does). This
needs to be cleaned up.
Closes https://github.com/facebook/rocksdb/pull/2345

Differential Revision: D5210732

Pulled By: maysamyabandeh

fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
2017-06-24 14:11:29 -07:00
Siying Dong
5582123dee Sample number of reads per SST file
Summary:
We estimate number of reads per SST files, by updating the counter per file in sampled read requests. This information can later be used to trigger compactions to improve read performacne.
Closes https://github.com/facebook/rocksdb/pull/2417

Differential Revision: D5193528

Pulled By: siying

fbshipit-source-id: b4241c5ad0eaf444b61afb53f8e6290d9f5da2df
2017-06-12 07:12:08 -07:00
Andrew Kryczka
215076ef06 Fix TSAN: avoid arena mode with range deletions
Summary:
The range deletion meta-block iterators weren't getting cleaned up properly since they don't support arena allocation. I didn't implement arena support since, in the general case, each iterator is used only once and separately from all other iterators, so there should be no benefit to data locality.

Anyways, this diff fixes up #2370 by treating range deletion iterators as non-arena-allocated.
Closes https://github.com/facebook/rocksdb/pull/2399

Differential Revision: D5171119

Pulled By: ajkr

fbshipit-source-id: bef6f5c4c5905a124f4993945aed4bd86e2807d8
2017-06-01 22:26:49 -07:00
Andrew Kryczka
9c9909bf7d Support ingest file when range deletions exist
Summary:
Previously we returned NotSupported when ingesting files into a database containing any range deletions. This diff adds the support.

- Flush if any memtable contains range deletions overlapping the to-be-ingested file
- Place to-be-ingested file before any level that contains range deletions overlapping it.
- Added support for `Version` to return iterators over range deletions in a given level. Previously, we piggybacked getting range deletions onto `Version`'s `Get()` / `AddIterator()` functions by passing them a `RangeDelAggregator*`. But file ingestion needs to get iterators over range deletions, not populate an aggregator (since the aggregator does collapsing and doesn't expose the actual ranges).
Closes https://github.com/facebook/rocksdb/pull/2370

Differential Revision: D5127648

Pulled By: ajkr

fbshipit-source-id: 816faeb9708adfa5287962bafdde717db56e3f1a
2017-05-31 13:57:19 -07:00
Siying Dong
d616ebea23 Add GPLv2 as an alternative license.
Summary: Closes https://github.com/facebook/rocksdb/pull/2226

Differential Revision: D4967547

Pulled By: siying

fbshipit-source-id: dd3b58ae1e7a106ab6bb6f37ab5c88575b125ab4
2017-04-27 18:06:12 -07:00
Siying Dong
d2dce5611a Move some files under util/ to separate dirs
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090

Differential Revision: D4833681

Pulled By: siying

fbshipit-source-id: 2fd8bef
2017-04-05 19:09:16 -07:00
Maysam Yabandeh
11526252cc Pinnableslice (2nd attempt)
Summary:
PinnableSlice

    Summary:
    Currently the point lookup values are copied to a string provided by the
    user. This incures an extra memcpy cost. This patch allows doing point lookup
    via a PinnableSlice which pins the source memory location (instead of
    copying their content) and releases them after the content is consumed
    by the user. The old API of Get(string) is translated to the new API
    underneath.

    Here is the summary for improvements:

    value 100 byte: 1.8% regular, 1.2% merge values
    value 1k byte: 11.5% regular, 7.5% merge values
    value 10k byte: 26% regular, 29.9% merge values
    The improvement for merge could be more if we extend this approach to
    pin the merge output and delay the full merge operation until the user
    actually needs it. We have put that for future work.

    PS:
    Sometimes we observe a small decrease in performance when switching from
    t5452014 to this patch but with the old Get(string) API. The d
Closes https://github.com/facebook/rocksdb/pull/1756

Differential Revision: D4391738

Pulled By: maysamyabandeh

fbshipit-source-id: 6f3edd3
2017-03-13 11:54:10 -07:00
Aaron Gao
2a0f3d0de1 level compaction expansion
Summary:
reimplement the compaction expansion on lower level.

Considering such a case:
input level file: 1[B E] 2[F G] 3[H I] 4 [J M]
output level file: 5[A C] 6[D K] 7[L O]

If we initially pick file 2, now we will compact file 2 and 6. But we can safely compact 2, 3 and 6 without expanding the output level.

The previous code is messy and wrong.

In this diff, I first determine the input range [a, b], and output range [c, d],
then we get the range [e,f] = [min(a, c), max(b, d] and put all eligible clean-cut files within [e, f] into this compaction.

**Note: clean-cut means the files don't have the same user key on the boundaries of some files that are not chosen in this compaction**.
Closes https://github.com/facebook/rocksdb/pull/1760

Differential Revision: D4395564

Pulled By: lightmark

fbshipit-source-id: 2dc2c5c
2017-02-21 10:24:17 -08:00
Yi Wu
9239103cd4 Flush job should release reference current version if sync log failed
Summary:
Fix the bug when sync log fail, FlushJob::Run() will not be execute and
reference to cfd->current() will not be release.
Closes https://github.com/facebook/rocksdb/pull/1792

Differential Revision: D4441316

Pulled By: yiwu-arbug

fbshipit-source-id: 5523e28
2017-01-19 23:09:15 -08:00
Maysam Yabandeh
d0ba8ec8f9 Revert "PinnableSlice"
Summary:
This reverts commit 54d94e9c2c.

The pull request was landed by mistake.
Closes https://github.com/facebook/rocksdb/pull/1755

Differential Revision: D4391678

Pulled By: maysamyabandeh

fbshipit-source-id: 36d5149
2017-01-08 14:24:12 -08:00
Maysam Yabandeh
54d94e9c2c PinnableSlice
Summary:
Currently the point lookup values are copied to a string provided by the user.
This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.

 Here is the summary for improvements:
 1. value 100 byte: 1.8%  regular, 1.2% merge values
 2. value 1k   byte: 11.5% regular, 7.5% merge values
 3. value 10k byte: 26% regular,    29.9% merge values

 The improvement for merge could be more if we extend this approach to
 pin the merge output and delay the full merge operation until the user
 actually needs it. We have put that for future work.

PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The difference
is a little and could be noise. More importantly it is safely
cancelled
Closes https://github.com/facebook/rocksdb/pull/1732

Differential Revision: D4374613

Pulled By: maysamyabandeh

fbshipit-source-id: a077f1a
2017-01-08 13:54:13 -08:00
Andrew Kryczka
9e7cf3469b DeleteRange user iterator support
Summary:
Note: reviewed in  https://reviews.facebook.net/D65115

- DBIter maintains a range tombstone accumulator. We don't cleanup obsolete tombstones yet, so if the user seeks back and forth, the same tombstones would be added to the accumulator multiple times.
- DBImpl::NewInternalIterator() (used to make DBIter's underlying iterator) adds memtable/L0 range tombstones, L1+ range tombstones are added on-demand during NewSecondaryIterator() (see D62205)
- DBIter uses ShouldDelete() when advancing to check whether keys are covered by range tombstones
Closes https://github.com/facebook/rocksdb/pull/1464

Differential Revision: D4131753

Pulled By: ajkr

fbshipit-source-id: be86559
2016-11-04 12:09:22 -07:00
Andrew Kryczka
f998c9790f DeleteRange Get support
Summary:
During Get()/MultiGet(), build up a RangeDelAggregator with range
tombstones as we search through live memtable, immutable memtables, and
SST files. This aggregator is then used by memtable.cc's SaveValue() and
GetContext::SaveValue() to check whether keys are covered.

added tests for Get on memtables/files; end-to-end tests mainly in https://reviews.facebook.net/D64761
Closes https://github.com/facebook/rocksdb/pull/1456

Differential Revision: D4111271

Pulled By: ajkr

fbshipit-source-id: 6e388d4
2016-11-03 18:54:20 -07:00
Islam AbdelRahman
869ae5d786 Support IngestExternalFile (remove AddFile restrictions)
Summary:
Changes in the diff

API changes:
- Introduce IngestExternalFile to replace AddFile (I think this make the API more clear)
- Introduce IngestExternalFileOptions (This struct will encapsulate the options for ingesting the external file)
- Deprecate AddFile() API

Logic changes:
- If our file overlap with the memtable we will flush the memtable
- We will find the first level in the LSM tree that our file key range overlap with the keys in it
- We will find the lowest level in the LSM tree above the the level we found in step 2 that our file can fit in and ingest our file in it
- We will assign a global sequence number to our new file
- Remove AddFile restrictions by using global sequence numbers

Other changes:
- Refactor all AddFile logic to be encapsulated in ExternalSstFileIngestionJob

Test Plan:
unit tests (still need to add more)
addfile_stress (https://reviews.facebook.net/D65037)

Reviewers: yiwu, andrewkr, lightmark, yhchiang, sdong

Reviewed By: sdong

Subscribers: jkedgar, hcz, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D65061
2016-10-20 17:05:32 -07:00
Andrew Kryczka
6fbe96baf8 Compaction Support for Range Deletion
Summary:
This diff introduces RangeDelAggregator, which takes ownership of iterators
provided to it via AddTombstones(). The tombstones are organized in a two-level
map (snapshot stripe -> begin key -> tombstone). Tombstone creation avoids data
copy by holding Slices returned by the iterator, which remain valid thanks to pinning.

For compaction, we create a hierarchical range tombstone iterator with structure
matching the iterator over compaction input data. An aggregator based on that
iterator is used by CompactionIterator to determine which keys are covered by
range tombstones. In case of merge operand, the same aggregator is used by
MergeHelper. Upon finishing each file in the compaction, relevant range tombstones
are added to the output file's range tombstone metablock and file boundaries are
updated accordingly.

To check whether a key is covered by range tombstone, RangeDelAggregator::ShouldDelete()
considers tombstones in the key's snapshot stripe. When this function is used outside of
compaction, it also checks newer stripes, which can contain covering tombstones. Currently
the intra-stripe check involves a linear scan; however, in the future we plan to collapse ranges
within a stripe such that binary search can be used.

RangeDelAggregator::AddToBuilder() adds all range tombstones in the table's key-range
to a new table's range tombstone meta-block. Since range tombstones may fall in the gap
between files, we may need to extend some files' key-ranges. The strategy is (1) first file
extends as far left as possible and other files do not extend left, (2) all files extend right
until either the start of the next file or the end of the last range tombstone in the gap,
whichever comes first.

One other notable change is adding release/move semantics to ScopedArenaIterator
such that it can be used to transfer ownership of an arena-allocated iterator, similar to
how unique_ptr is used for malloc'd data.

Depends on D61473

Test Plan: compaction_iterator_test, mock_table, end-to-end tests in D63927

Reviewers: sdong, IslamAbdelRahman, wanning, yhchiang, lightmark

Reviewed By: lightmark

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D62205
2016-10-18 12:04:56 -07:00
Islam AbdelRahman
2ad68b971a Support running consistency checks in release mode
Summary:
We always run consistency checks when compiling in debug mode
allow users to set Options::force_consistency_checks to true to be able to run such checks even when compiling in release mode

Test Plan:
make check -j64
make release

Reviewers: lightmark, sdong, yiwu

Reviewed By: yiwu

Subscribers: hermanlee4, andrewkr, yoshinorim, jkedgar, dhruba

Differential Revision: https://reviews.facebook.net/D64701
2016-10-07 17:21:45 -07:00
Yi Wu
9ed928e7a9 Split DBOptions into ImmutableDBOptions and MutableDBOptions
Summary: Use ImmutableDBOptions/MutableDBOptions internally and DBOptions only for user-facing APIs. MutableDBOptions is barely a placeholder for now. I'll start to move options to MutableDBOptions in following diffs.

Test Plan:
  make all check

Reviewers: yhchiang, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D64065
2016-09-23 16:34:04 -07:00
Yi Wu
81747f1be6 Refactor MutableCFOptions
Summary:
* Change constructor of MutableCFOptions to depends only on ColumnFamilyOptions.
* Move `max_subcompactions`, `compaction_options_fifo` and `compaction_pri` to ImmutableCFOptions to make it clear that they are immutable.

Test Plan: existing unit tests.

Reviewers: yhchiang, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D63945
2016-09-13 21:11:59 -07:00
sdong
32df9733d1 Add options.write_buffer_manager: control total memtable size across DB instances
Summary: Add option write_buffer_manager to help users control total memory spent on memtables across multiple DB instances.

Test Plan: Add a new unit test.

Reviewers: yhchiang, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: adela, benj, sumeet, muthu, leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D59925
2016-07-05 18:11:25 -07:00
Aaron Gao
5aaef91d4a group multiple batch of flush into one manifest file (one call to LogAndApply)
Summary: Currently, if several flush outputs are committed together, we issue each manifest write per batch (1 batch = 1 flush = 1 sst file = 1+ continuous memtables). Each manifest write requires one fsync and one fsync to parent directory. In some cases, it becomes the bottleneck of write. We should batch them and write in one manifest write when possible.

Test Plan:
` ./db_bench -benchmarks="fillseq" -max_write_buffer_number=16 -max_background_flushes=16 -disable_auto_compactions=true -min_write_buffer_number_to_merge=1 -write_buffer_size=65536 -level0_stop_writes_trigger=10000 -level0_slowdown_writes_trigger=10000`
**Before**
```
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB:    version 4.9
Date:       Fri Jul  1 15:38:17 2016
CPU:        32 * Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz
CPUCache:   20480 KB
Keys:       16 bytes each
Values:     100 bytes each (50 bytes after compression)
Entries:    1000000
Prefix:    0 bytes
Keys per prefix:    0
RawSize:    110.6 MB (estimated)
FileSize:   62.9 MB (estimated)
Write rate: 0 bytes/second
Compression: Snappy
Memtablerep: skip_list
Perf Level: 1
WARNING: Assertions are enabled; benchmarks unnecessarily slow
------------------------------------------------
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
DB path: [/tmp/rocksdbtest-112628/dbbench]
fillseq      :     166.277 micros/op 6014 ops/sec;    0.7 MB/s
```
**After**
```
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB:    version 4.9
Date:       Fri Jul  1 15:35:05 2016
CPU:        32 * Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz
CPUCache:   20480 KB
Keys:       16 bytes each
Values:     100 bytes each (50 bytes after compression)
Entries:    1000000
Prefix:    0 bytes
Keys per prefix:    0
RawSize:    110.6 MB (estimated)
FileSize:   62.9 MB (estimated)
Write rate: 0 bytes/second
Compression: Snappy
Memtablerep: skip_list
Perf Level: 1
WARNING: Assertions are enabled; benchmarks unnecessarily slow
------------------------------------------------
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
DB path: [/tmp/rocksdbtest-112628/dbbench]
fillseq      :      52.328 micros/op 19110 ops/sec;    2.1 MB/s
```

Reviewers: andrewkr, IslamAbdelRahman, yhchiang, sdong

Reviewed By: sdong

Subscribers: igor, andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D60075
2016-07-05 18:09:59 -07:00
sdong
20699df843 memtable_prefix_bloom_bits -> memtable_prefix_bloom_bits_ratio and deprecate memtable_prefix_bloom_probes
Summary:
memtable_prefix_bloom_probes is not a critical option. Remove it to reduce number of options.
It's easier for users to make mistakes with memtable_prefix_bloom_bits, turn it to memtable_prefix_bloom_bits_ratio

Test Plan: Run all existing tests

Reviewers: yhchiang, igor, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: gunnarku, yoshinorim, MarkCallaghan, leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D59199
2016-06-10 12:12:10 -07:00
Wanning Jiang
56887f6cb8 Backup Options
Summary: Backup options file to private directory

Test Plan:
backupable_db_test.cc, BackupOptions
	   Modify DB options by calling OpenDB for 3 times. Check the latest options file is in the right place. Also check no redundent files are backuped.

Reviewers: andrewkr

Reviewed By: andrewkr

Subscribers: leveldb, dhruba, andrewkr

Differential Revision: https://reviews.facebook.net/D59373
2016-06-09 19:03:10 -07:00
Ashish Shenoy
99765ed855 Clean up the ComputeCompactionScore() API
Summary: Make CompactionOptionsFIFO a part of mutable_cf_options

Test Plan: UT

Reviewers: sdong

Reviewed By: sdong

Subscribers: andrewkr, lgalanis, dhruba

Differential Revision: https://reviews.facebook.net/D58653
2016-05-23 15:55:29 -07:00
Andrew Kryczka
73a847ef89 Add per-level compression ratio property
Summary:
This is needed so we can measure compression ratio improvements
achieved by D52287.

The property compares raw data size against the total file size for a given
level. If the level is empty it should return 0.0.

Test Plan: new unit test

Reviewers: IslamAbdelRahman, yhchiang, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D56967
2016-04-20 18:46:54 -07:00
Yueh-Hsuan Chiang
be9816b3d9 Fix data race issue when sub-compaction is used in CompactionJob
Summary:
When subcompaction is used, all subcompactions share the same Compaction
pointer in CompactionJob while each subcompaction all keeps their mutable
stats in SubcompactionState.  However, there're still some mutable part
that is currently store in the shared Compaction pointer.

This patch makes two changes:

1. Make the shared Compaction pointer const so that it can never be modified
   during the compaction.
2. Move necessary states from Compaction to SubcompactionState.
3. Make functions of Compaction const if the function does not modify
   its internal state.

Test Plan: rocksdb and MyRocks test

Reviewers: sdong, kradhakrishnan, andrewkr, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: andrewkr, dhruba, yoshinorim, gunnarku, leveldb

Differential Revision: https://reviews.facebook.net/D55923
2016-03-24 19:36:39 -07:00
Andrew Kryczka
d9620239d2 Cleanup stale manifests outside of full purge
Summary:
- Keep track of obsolete manifests in VersionSet
- Updated FindObsoleteFiles() to put obsolete manifests in the JobContext for later use by PurgeObsoleteFiles()
- Added test case that verifies a stale manifest is deleted by a non-full purge

Test Plan:
  $ ./backupable_db_test --gtest_filter=BackupableDBTest.ChangeManifestDuringBackupCreation

Reviewers: IslamAbdelRahman, yoshinorim, sdong

Reviewed By: sdong

Subscribers: andrewkr, leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D55269
2016-03-10 18:16:21 -08:00