Summary: Added a prefix_seek flag in ReadOptions to indicate that Seek is prefix aware(might not return data with different prefix), and also not bound to a specific prefix. Multiple Seeks and range scans can be invoked on the same iterator. If a specific prefix is specified, this flag will be ignored. Just a quick prototype that works for PrefixHashRep, the new lockless memtable could be easily extended with this support too.
Test Plan: test it on Leaf
Reviewers: dhruba, kailiu, sdong, igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13929
Summary:
Archive cleaning will still happen every WAL_ttl seconds
but archived logs will be deleted only if archive size
is greater then a WAL_size_limit value.
Empty archived logs will be deleted evety WAL_ttl.
Test Plan:
1. Unit tests pass.
2. Benchmark.
Reviewers: emayanke, dhruba, haobo, sdong, kailiu, igor
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13869
Summary:
I'm sending this diff together with https://reviews.facebook.net/D13881 because it didn't allow me to send only the array one.
Here I also replaced unordered_map with just an array of shared_ptrs. This elminated all the locks.
I will run the new benchmark and post the results here.
Test Plan: db_test
Reviewers: dhruba, haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13893
Summary:
strict essentially means that we MUST find the startsequence. Thus we should return if starteSequence is not found in the first file in case strict is set. This will take care of ending the iterator in case of permanent gaps due to corruptions in the log files
Also created NextImpl function that will have internal variable to distinguish whether Next is being called from StartSequence or by application.
Set NotFoudn::gaps status to give an indication of gaps happeneing.
Polished the inline documentation at various places
Test Plan:
* db_repl_stress test
* db_test relating to transaction log iterator
* fbcode/wormhole/rocksdb/rocks_log_iterator
* sigma production machine sigmafio032.prn1
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13689
Summary:
Rocksdb can now support a uncompressed block cache, or a compressed
block cache or both. Lookups first look for a block in the
uncompressed cache, if it is not found only then it is looked up
in the compressed cache. If it is found in the compressed cache,
then it is uncompressed and inserted into the uncompressed cache.
It is possible that the same block resides in the compressed cache
as well as the uncompressed cache at the same time. Both caches
have their own individual LRU policy.
Test Plan: Unit test case attached.
Reviewers: kailiu, sdong, haobo, leveldb
Reviewed By: haobo
CC: xjin, haobo
Differential Revision: https://reviews.facebook.net/D12675
Summary: This is to give application compaction filter a chance to access context information of a specific compaction run. For example, depending on whether a compaction goes through all data files, the application could do things differently.
Test Plan: make check
Reviewers: dhruba, kailiu, sdong
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13683
Summary:
Currently for each put, a fresh memory is allocated, and a new entry is added to the memtable with a new sequence number irrespective of whether the key already exists in the memtable. This diff is an attempt to update the value inplace for existing keys. It currently handles a very simple case:
1. Key already exists in the current memtable. Does not inplace update values in immutable memtable or snapshot
2. Latest value type is a 'put' ie kTypeValue
3. New value size is less than existing value, to avoid reallocating memory
TODO: For a put of an existing key, deallocate memory take by values, for other value types till a kTypeValue is found, ie. remove kTypeMerge.
TODO: Update the transaction log, to allow consistent reload of the memtable.
Test Plan: Added a unit test verifying the inplace update. But some other unit tests broken due to invalid sequence number checks. WIll fix them next.
Reviewers: xinyaohu, sumeet, haobo, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12423
Automatic commit by arc
Summary:
This patch is to address @haobo's comments on D13521:
1. rename Table to be TableReader and make its factory function to be GetTableReader
2. move the compression type selection logic out of TableBuilder but to compaction logic
3. more accurate comments
4. Move stat name constants into BlockBasedTable implementation.
5. remove some uncleaned codes in simple_table_db_test
Test Plan: pass test suites.
Reviewers: haobo, dhruba, kailiu
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13785
Summary: This patch makes Table and TableBuilder a abstract class and make all the implementation of the current table into BlockedBasedTable and BlockedBasedTable Builder.
Test Plan: Make db_test.cc to work with block based table. Add a new test simple_table_db_test.cc where a different simple table format is implemented.
Reviewers: dhruba, haobo, kailiu, emayanke, vamsi
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13521
Summary:
1. Added a new option that support user-defined table stats collection.
2. Added a deleted key stats collector in `utilities`
Test Plan:
Added a unit test for newly added code.
Also ran make check to make sure other tests are not broken.
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13491
Summary:
When a Put fails, it can leave database in a messy state. We don't want to pretend that everything is OK when it may not be. We fail every write following the failed one.
I added checks for corruption to DBImpl::Write(). Is there anywhere else I need to add them?
Test Plan: Corruption unit test.
Reviewers: dhruba, haobo, kailiu
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13671
Summary:
This is to simplify rocksdb public APIs and improve the code quality.
Created an additional parameter to ParseFileName for log sub type and improved the code for deleting a wal file.
Wrote exhaustive unit-tests in delete_file_test
Unification of other redundant APIs can be taken up in a separate diff
Test Plan: Expanded delete_file test
Reviewers: dhruba, haobo, kailiu, sdong
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13647
Summary: as title
Test Plan: make check; ./perf_context_test
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13629
Summary:
Create a new type of file on startup if it doesn't already exist called DBID.
This will store a unique number generated from boost library's uuid header file.
The use-case is to identify the case of a db losing all its data and coming back up either empty or from an image(backup/live replica's recovery)
the key point to note is that DBID is not stored in a backup or db snapshot
It's preferable to use Boost for uuid because:
1) A non-standard way of generating uuid is not good
2) /proc/sys/kernel/random/uuid generates a uuid but only on linux environments and the solution would not be clean
3) c++ doesn't have any direct way to get a uuid
4) Boost is a very good library that was already having linkage in rocksdb from third-party
Note: I had to update the TOOLCHAIN_REV in build files to get latest verison of boost from third-party as the older version had a bug.
I had to put Wno-uninitialized in Makefile because boost-1.51 has an unitialized variable and rocksdb would not comiple otherwise. Latet open-source for boost is 1.54 but is not there in third-party. I have notified the concerned people in fbcode about it.
@kailiu : While releasing to third-party, an additional dependency will need to be created for boost in TARGETS file. I can help identify.
Test Plan:
Expand db_test to test 2 cases
1) Restarting db with Id file present - verify that no change to Id
2)Restarting db with Id file deleted - verify that a different Id is there after reopen
Also run make all check
Reviewers: dhruba, haobo, kailiu, sdong
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13587
Summary:
This patch adds a option for universal compaction to allow us to only compress output files if the files compacted previously did not yet reach a specified ratio, to save CPU costs in some cases.
Compression is always skipped for flushing. This is because the size information is not easy to evaluate for flushing case. We can improve it later.
Test Plan:
add test
DBTest.UniversalCompactionCompressRatio1 and DBTest.UniversalCompactionCompressRatio12
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13467
Summary: As title.
Test Plan: Updated the unit tests to make sure new statistic is correctly written/read.
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13497
Summary:
* Logstore requests a valid change of reutrning an empty iterator and not an error in case of no log files.
* Changed the code to return the writebatch containing the sequence number requested from GetupdatesSince even if it lies in the middle. Earlier we used to return the next writebatch,. This also allows me oto guarantee that no files played upon by the iterator are redundant. I mean the starting log file has at least a sequence number >= the sequence number requested form GetupdatesSince.
* Cleaned up redundant logic in Iterator::Next and made a new function SeekToStartSequence for greater readability and maintainibilty.
* Modified a test in db_test accordingly
Please check the logic carefully and suggest improvements. I have a separate patch out for more improvements like restricting reader to read till written sequences.
Test Plan:
* transaction log iterator tests in db_test,
* db_repl_stress.
* rocks_log_iterator_test in fbcode/wormhole/rocksdb/test - 2 tests thriving on hacks till now can get simplified
* testing on the shadow setup for sigma with replication
Reviewers: dhruba, haobo, kailiu, sdong
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13437
Summary:
So far we only have key/value pairs as well as bloom filter stored in the
sst file. It will be great if we are able to store more metadata about
this table itself, for example, the entry size, bloom filter name, etc.
This diff is the first step of this effort. It allows table to keep the
basic statistics mentioned in http://fburl.com/14995441, as well as
allowing writing user-collected stats to stats block.
After this diff, we will figure out the interface of how to allow user to collect their interested statistics.
Test Plan:
1. Added several unit tests.
2. Ran `make check` to ensure it doesn't break other tests.
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13419
Summary:
With this patch, when LRUCache.Insert() is called and the cache is full, it will first try to free up entries whose reference counter is 1 (would become 0 after remo\
ving from the cache). We do it in two passes, in the first pass, we only try to release those unreferenced entries. If we cannot free enough space after traversing t\
he first remove_scan_cnt_ entries, we start from the beginning again and remove those entries being used.
Test Plan: add two unit tests to cover the codes
Reviewers: dhruba, haobo, emayanke
Reviewed By: emayanke
CC: leveldb, emayanke, xjin
Differential Revision: https://reviews.facebook.net/D13377
Summary: I have implemented basic simple use case that I need for External Value Store I'm working on. There is a potential for making this prettier by refactoring/combining WritableFile and RandomAccessFile, avoiding some copypasta. However, I decided to implement just the basic functionality, so I can continue working on the other diff.
Test Plan: Added a unittest
Reviewers: dhruba, haobo, kailiu
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13365
Summary:
The previous release 2.4 had a mapping to alias the older
namespace to rocksdb. This mapping is not needed in the new
release.
Test Plan:
make check
make release
Reviewers: emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13359
Summary: In some cases, you might not want to store the data log (write ahead log) files in the same dir as the sst files. An example use case is leaf, which stores sst files in tmpfs. And would like to save the log files in a separate dir (disk) to save memory.
Test Plan: make all. Ran db_test test. A few test failing. P2785018. If you guys don't see an obvious problem with the code, maybe somebody from the rocksdb team could help me debug the issue here. Running this on leaf worked well. I could see logs stored on disk, and deleted appropriately after compactions. Obviously this is only one set of options. The unit tests cover different options. Seems like I'm missing some edge cases.
Reviewers: dhruba, haobo, leveldb
CC: xinyaohu, sumeet
Differential Revision: https://reviews.facebook.net/D13239
Summary:
Change namespace from leveldb to rocksdb. This allows a single
application to link in open-source leveldb code as well as
rocksdb code into the same process.
Test Plan: compile rocksdb
Reviewers: emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13287
Summary: This is useful to keep track of refreshes in transaction log iterator
Test Plan: make; db_stress --statistics=1 shows it
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13281
Summary:
As explained in comments in GetLiveFiles in db.h, this option will cause flush to be skipped in GetLiveFiles because some use-cases use GetSortedWalFiles after GetLiveFiles to generate more complete snapshots.
Using GetSortedWalFiles after GetLiveFiles allows us to not Flush in GetLiveFiles first because wals have everything.
Note: file deletions will be disabled before calling GLF or GSWF so live logs will not move to archive logs or get delted.
Note: Manifest file is truncated to a proper value in GLF, so it will always reply from the proper wal files on a restart
Test Plan: make
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13257
Summary: As title. This is just a quick hack and not ready for commit. fails a lot of unit test. I will test/debug it directly in ViewState shadow .
Test Plan: Try it in shadow test.
Reviewers: dhruba, xjin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12933
Summary: as title. unit test not polished. this is for a quick live test
Test Plan: live
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13221
Summary:
I am planning to add more to statistics classes but found current way of using enum is very verbose and unnecessarily increase the
difficulity of adding new statistics.
In this diff I removed the code that explicitly specifies the value of each enum entry. This will help us easily add new statistic
items more conveniently without manually adding the value of other enum entries by one.
Test Plan: make; make check;
Reviewers: haobo, dhruba, xjin, emayanke, vamsi
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13197
Summary: as title
Test Plan: make check
Reviewers: dhruba, emayanke
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13179
Summary:
The constructor for Vector memtable has a parameter called 'count'
that specifies the capacity of the vector to be reserved at allocation
time. It was incorrectly used to initialize the size of the vector.
Test Plan: Enhanced db_test.
Reviewers: haobo, xjin, emayanke
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13083
Summary:
Added a new api to the Environment that allows clearing out not-needed
pages from the OS cache. This will be helpful when the compressed
block cache replaces the OS cache.
Test Plan: EnvPosixTest.InvalidateCache
Reviewers: haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13041
Summary:
Added a new field called max_size_amplification_ratio in the
CompactionOptionsUniversal structure. This determines the maximum
percentage overhead of space amplification.
The size amplification is defined to be the ratio between the size of
the oldest file to the sum of the sizes of all other files. If the
size amplification exceeds the specified value, then min_merge_width
and max_merge_width are ignored and a full compaction of all files is done.
A value of 10 means that the size a database that stores 100 bytes
of user data could occupy 110 bytes of physical storage.
Test Plan: Unit test DBTest.UniversalCompactionSpaceAmplification added.
Reviewers: haobo, emayanke, xjin
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12825
Summary:
this is the ground work for separating memtable flush jobs to their own thread pool.
Both SetBackgroundThreads and Schedule take a third parameter Priority to indicate which thread pool they are working on. The names LOW and HIGH are just identifiers for two different thread pools, and does not indicate real difference in 'priority'. We can set number of threads in the pools independently.
The thread pool implementation is refactored.
Test Plan: make check
Reviewers: dhruba, emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12885
Summary: As title. The DB log file life cycle is tied up with the memtable it backs. Once the memtable is flushed to sst and committed, we should be able to delete the log file, without holding the mutex. This is part of the bigger change to avoid FindObsoleteFiles at runtime. It deals with log files. sst files will be dealt with later.
Test Plan: make check; db_bench
Reviewers: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11709
Summary: The pupose of this diff is to expose per user-call level precise timing of block read, so that we can answer questions like: a Get() costs me 100ms, is that somehow related to loading blocks from file system, or sth else? We will answer that with EXACTLY how many blocks have been read, how much time was spent on transfering the bytes from os, how much time was spent on checksum verification and how much time was spent on block decompression, just for that one Get. A nano second stopwatch was introduced to track time with higher precision. The cost/precision of the stopwatch is also measured in unit-test. On my dev box, retrieving one time instance costs about 30ns, on average. The deviation of timing results is good enough to track 100ns-1us level events. And the overhead could be safely ignored for 100us level events (10000 instances/s), for example, a viewstate thrift call.
Test Plan: perf_context_test, also testing with viewstate shadow traffic.
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb, xjin
Differential Revision: https://reviews.facebook.net/D12351
Summary:
An iterator invokes reseek if the number of sequential skips over the
same userkey exceeds a configured number. This makes iter->Next()
faster (bacause of fewer key compares) if a large number of
adjacent internal keys in a table (sst or memtable) have the
same userkey.
Test Plan: Unit test DBTest.IterReseek.
Reviewers: emayanke, haobo, xjin
Reviewed By: xjin
CC: leveldb, xjin
Differential Revision: https://reviews.facebook.net/D11865
Summary: LogData doesn't consume sequence numbers and doesn't increase the count of the write-batch. Also it was discussed that GetLiveFiles will have to be followed by GetSortedWalFiles to get a lossless backup
Test Plan: visual
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12753
Summary: So that replication can just download from wherever LogFile.Pathname is pointing them.
Test Plan: make all check;./db_repl_stress
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12609
Summary:
Add new command "change_compaction_style" to ldb tool. For
universal->level, it shows "nothing to do". For level->universal, it
compacts all files into a single one and moves the file to level 0.
Also add check for number of files at level 1+ when opening db with
universal compaction style.
Test Plan:
'make all check'. New unit test for internal convertion function. Also manully test various
cmd like:
./ldb change_compaction_style --old_compaction_style=0
--new_compaction_style=1 --db=/tmp/leveldbtest-3088/db_test
Reviewers: haobo, dhruba
Reviewed By: haobo
CC: vamsi, emayanke
Differential Revision: https://reviews.facebook.net/D12603
Summary:
The way counters/statistics are implemented in rocksdb demands that enum Tickers and TickerNameMap follow the same order, otherwise statistics exposed from fbcode/rocks get out-of-sync. 2 counters for prefix had violated this order and when I built counters for fbcode/mcrocksdb, statistics for sequence number were appearing out-of-sync.
The other change is to record sequence-number using setTickerCount only and not recordTick. This is because of difference in statistics as understood by rocks/utils which uses ServiceData::statistics function and rocksdb statistics. In rocksdb there is just 1 counter for a countername. But in ServiceData there are 4 independent buckets for every countername-Count, Sum, Average and Rate. SetTickerCount and RecordTick update the same variable in rocksdb but different buckets in ServiceData. Therefore, I had to choose one consistent function from RecordTick or SetTickerCount for sequence number in rocksdb. I chose SetTickerCount because the statistics object in options passed during rocksdb-open is user-dependent and SetTickerCount makes sense there.
There will be a corresponding diff to mcorcksdb in fbcode shortly.
Test Plan: make all check; check ticker value using fprintfs
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12669
Summary: WouldBlock was an internediate statue but was changed to Incomplete
Test Plan: visual
Reviewers: dhruba
Differential Revision: https://reviews.facebook.net/D12651
Summary:
The DeleteFile API was removing files inside the db-lock. This
is now changed to remove files outside the db-lock.
The GetLiveFilesMetadata() returns the smallest and largest
seqnuence number of each file as well.
Test Plan: deletefile_test
Reviewers: emayanke, haobo
Reviewed By: haobo
CC: leveldb
Maniphest Tasks: T63
Differential Revision: https://reviews.facebook.net/D12567
Summary: Let TransformRepFactory own the passed in transform. Also make it better encapsulated.
Test Plan: make valgrind_check;
Reviewers: dhruba, emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12591
Summary:
If ReadOptions.non_blocking_io is set to true, then KeyMayExists
and Iterators will return data that is cached in RAM.
If the Iterator needs to do IO from storage to serve the data,
then the Iterator.status() will return Status::IsRetry().
Test Plan:
Enhanced unit test DBTest.KeyMayExist to detect if there were are IOs
issues from storage. Added DBTest.NonBlockingIteration to verify
nonblocking Iterations.
Reviewers: emayanke, haobo
Reviewed By: haobo
CC: leveldb
Maniphest Tasks: T63
Differential Revision: https://reviews.facebook.net/D12531
Summary: There is a memory leak because TransformRepFactory does not delete its SliceTransform pointer. This patch adds a delete to the destructor.
Test Plan:
make check
make valgrind_check
Reviewers: dhruba, emayanke, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12513
Summary: Fix code so that the filter_block layer only assumes keys are internal when prefix_extractor is set.
Test Plan: ./filter_block_test
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12501
