3122cb4358
Summary: ajkr reminded me that we have a rule of not including per-kv related data in `WriteOptions`. Namely, `WriteOptions` should not include information about "what-to-write", but should just include information about "how-to-write". According to this rule, `WriteOptions::timestamp` (experimental) is clearly a violation. Therefore, this PR removes `WriteOptions::timestamp` for compliance. After the removal, we need to pass timestamp info via another set of APIs. This PR proposes a set of overloaded functions `Put(write_opts, key, value, ts)`, `Delete(write_opts, key, ts)`, and `SingleDelete(write_opts, key, ts)`. Planned to add `Write(write_opts, batch, ts)`, but its complexity made me reconsider doing it in another PR (maybe). For better checking and returning error early, we also add a new set of APIs to `WriteBatch` that take extra `timestamp` information when writing to `WriteBatch`es. These set of APIs in `WriteBatchWithIndex` are currently not supported, and are on our TODO list. Removed `WriteBatch::AssignTimestamps()` and renamed `WriteBatch::AssignTimestamp()` to `WriteBatch::UpdateTimestamps()` since this method require that all keys have space for timestamps allocated already and multiple timestamps can be updated. The constructor of `WriteBatch` now takes a fourth argument `default_cf_ts_sz` which is the timestamp size of the default column family. This will be used to allocate space when calling APIs that do not specify a column family handle. Also, updated `DB::Get()`, `DB::MultiGet()`, `DB::NewIterator()`, `DB::NewIterators()` methods, replacing some assertions about timestamp to returning Status code. Pull Request resolved: https://github.com/facebook/rocksdb/pull/8946 Test Plan: make check ./db_bench -benchmarks=fillseq,fillrandom,readrandom,readseq,deleterandom -user_timestamp_size=8 ./db_stress --user_timestamp_size=8 -nooverwritepercent=0 -test_secondary=0 -secondary_catch_up_one_in=0 -continuous_verification_interval=0 Make sure there is no perf regression by running the following ``` ./db_bench_opt -db=/dev/shm/rocksdb -use_existing_db=0 -level0_stop_writes_trigger=256 -level0_slowdown_writes_trigger=256 -level0_file_num_compaction_trigger=256 -disable_wal=1 -duration=10 -benchmarks=fillrandom ``` Before this PR ``` DB path: [/dev/shm/rocksdb] fillrandom : 1.831 micros/op 546235 ops/sec; 60.4 MB/s ``` After this PR ``` DB path: [/dev/shm/rocksdb] fillrandom : 1.820 micros/op 549404 ops/sec; 60.8 MB/s ``` Reviewed By: ltamasi Differential Revision: D33721359 Pulled By: riversand963 fbshipit-source-id: c131561534272c120ffb80711d42748d21badf09
2179 lines
80 KiB
C++
2179 lines
80 KiB
C++
// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
|
|
// This source code is licensed under both the GPLv2 (found in the
|
|
// COPYING file in the root directory) and Apache 2.0 License
|
|
// (found in the LICENSE.Apache file in the root directory).
|
|
//
|
|
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
|
|
// Use of this source code is governed by a BSD-style license that can be
|
|
// found in the LICENSE file. See the AUTHORS file for names of contributors.
|
|
#include <cinttypes>
|
|
|
|
#include "db/db_impl/db_impl.h"
|
|
#include "db/error_handler.h"
|
|
#include "db/event_helpers.h"
|
|
#include "logging/logging.h"
|
|
#include "monitoring/perf_context_imp.h"
|
|
#include "options/options_helper.h"
|
|
#include "test_util/sync_point.h"
|
|
#include "util/cast_util.h"
|
|
|
|
namespace ROCKSDB_NAMESPACE {
|
|
// Convenience methods
|
|
Status DBImpl::Put(const WriteOptions& o, ColumnFamilyHandle* column_family,
|
|
const Slice& key, const Slice& val) {
|
|
const Status s = FailIfCfHasTs(column_family);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
return DB::Put(o, column_family, key, val);
|
|
}
|
|
|
|
Status DBImpl::Put(const WriteOptions& o, ColumnFamilyHandle* column_family,
|
|
const Slice& key, const Slice& ts, const Slice& val) {
|
|
const Status s = FailIfTsSizesMismatch(column_family, ts);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
return DB::Put(o, column_family, key, ts, val);
|
|
}
|
|
|
|
Status DBImpl::Merge(const WriteOptions& o, ColumnFamilyHandle* column_family,
|
|
const Slice& key, const Slice& val) {
|
|
const Status s = FailIfCfHasTs(column_family);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
auto cfh = static_cast_with_check<ColumnFamilyHandleImpl>(column_family);
|
|
if (!cfh->cfd()->ioptions()->merge_operator) {
|
|
return Status::NotSupported("Provide a merge_operator when opening DB");
|
|
} else {
|
|
return DB::Merge(o, column_family, key, val);
|
|
}
|
|
}
|
|
|
|
Status DBImpl::Delete(const WriteOptions& write_options,
|
|
ColumnFamilyHandle* column_family, const Slice& key) {
|
|
const Status s = FailIfCfHasTs(column_family);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
return DB::Delete(write_options, column_family, key);
|
|
}
|
|
|
|
Status DBImpl::Delete(const WriteOptions& write_options,
|
|
ColumnFamilyHandle* column_family, const Slice& key,
|
|
const Slice& ts) {
|
|
const Status s = FailIfTsSizesMismatch(column_family, ts);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
return DB::Delete(write_options, column_family, key, ts);
|
|
}
|
|
|
|
Status DBImpl::SingleDelete(const WriteOptions& write_options,
|
|
ColumnFamilyHandle* column_family,
|
|
const Slice& key) {
|
|
const Status s = FailIfCfHasTs(column_family);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
return DB::SingleDelete(write_options, column_family, key);
|
|
}
|
|
|
|
Status DBImpl::SingleDelete(const WriteOptions& write_options,
|
|
ColumnFamilyHandle* column_family, const Slice& key,
|
|
const Slice& ts) {
|
|
const Status s = FailIfTsSizesMismatch(column_family, ts);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
return DB::SingleDelete(write_options, column_family, key, ts);
|
|
}
|
|
|
|
Status DBImpl::DeleteRange(const WriteOptions& write_options,
|
|
ColumnFamilyHandle* column_family,
|
|
const Slice& begin_key, const Slice& end_key) {
|
|
const Status s = FailIfCfHasTs(column_family);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
return DB::DeleteRange(write_options, column_family, begin_key, end_key);
|
|
}
|
|
|
|
void DBImpl::SetRecoverableStatePreReleaseCallback(
|
|
PreReleaseCallback* callback) {
|
|
recoverable_state_pre_release_callback_.reset(callback);
|
|
}
|
|
|
|
Status DBImpl::Write(const WriteOptions& write_options, WriteBatch* my_batch) {
|
|
return WriteImpl(write_options, my_batch, /*callback=*/nullptr,
|
|
/*log_used=*/nullptr);
|
|
}
|
|
|
|
#ifndef ROCKSDB_LITE
|
|
Status DBImpl::WriteWithCallback(const WriteOptions& write_options,
|
|
WriteBatch* my_batch,
|
|
WriteCallback* callback) {
|
|
return WriteImpl(write_options, my_batch, callback, nullptr);
|
|
}
|
|
#endif // ROCKSDB_LITE
|
|
|
|
// The main write queue. This is the only write queue that updates LastSequence.
|
|
// When using one write queue, the same sequence also indicates the last
|
|
// published sequence.
|
|
Status DBImpl::WriteImpl(const WriteOptions& write_options,
|
|
WriteBatch* my_batch, WriteCallback* callback,
|
|
uint64_t* log_used, uint64_t log_ref,
|
|
bool disable_memtable, uint64_t* seq_used,
|
|
size_t batch_cnt,
|
|
PreReleaseCallback* pre_release_callback) {
|
|
assert(!seq_per_batch_ || batch_cnt != 0);
|
|
if (my_batch == nullptr) {
|
|
return Status::Corruption("Batch is nullptr!");
|
|
} else if (WriteBatchInternal::TimestampsUpdateNeeded(*my_batch)) {
|
|
return Status::InvalidArgument("write batch must have timestamp(s) set");
|
|
}
|
|
// TODO: this use of operator bool on `tracer_` can avoid unnecessary lock
|
|
// grabs but does not seem thread-safe.
|
|
if (tracer_) {
|
|
InstrumentedMutexLock lock(&trace_mutex_);
|
|
if (tracer_ && !tracer_->IsWriteOrderPreserved()) {
|
|
// We don't have to preserve write order so can trace anywhere. It's more
|
|
// efficient to trace here than to add latency to a phase of the log/apply
|
|
// pipeline.
|
|
// TODO: maybe handle the tracing status?
|
|
tracer_->Write(my_batch).PermitUncheckedError();
|
|
}
|
|
}
|
|
if (write_options.sync && write_options.disableWAL) {
|
|
return Status::InvalidArgument("Sync writes has to enable WAL.");
|
|
}
|
|
if (two_write_queues_ && immutable_db_options_.enable_pipelined_write) {
|
|
return Status::NotSupported(
|
|
"pipelined_writes is not compatible with concurrent prepares");
|
|
}
|
|
if (seq_per_batch_ && immutable_db_options_.enable_pipelined_write) {
|
|
// TODO(yiwu): update pipeline write with seq_per_batch and batch_cnt
|
|
return Status::NotSupported(
|
|
"pipelined_writes is not compatible with seq_per_batch");
|
|
}
|
|
if (immutable_db_options_.unordered_write &&
|
|
immutable_db_options_.enable_pipelined_write) {
|
|
return Status::NotSupported(
|
|
"pipelined_writes is not compatible with unordered_write");
|
|
}
|
|
// Otherwise IsLatestPersistentState optimization does not make sense
|
|
assert(!WriteBatchInternal::IsLatestPersistentState(my_batch) ||
|
|
disable_memtable);
|
|
|
|
if (write_options.low_pri) {
|
|
Status s = ThrottleLowPriWritesIfNeeded(write_options, my_batch);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
}
|
|
|
|
if (two_write_queues_ && disable_memtable) {
|
|
AssignOrder assign_order =
|
|
seq_per_batch_ ? kDoAssignOrder : kDontAssignOrder;
|
|
// Otherwise it is WAL-only Prepare batches in WriteCommitted policy and
|
|
// they don't consume sequence.
|
|
return WriteImplWALOnly(&nonmem_write_thread_, write_options, my_batch,
|
|
callback, log_used, log_ref, seq_used, batch_cnt,
|
|
pre_release_callback, assign_order,
|
|
kDontPublishLastSeq, disable_memtable);
|
|
}
|
|
|
|
if (immutable_db_options_.unordered_write) {
|
|
const size_t sub_batch_cnt = batch_cnt != 0
|
|
? batch_cnt
|
|
// every key is a sub-batch consuming a seq
|
|
: WriteBatchInternal::Count(my_batch);
|
|
uint64_t seq = 0;
|
|
// Use a write thread to i) optimize for WAL write, ii) publish last
|
|
// sequence in in increasing order, iii) call pre_release_callback serially
|
|
Status status = WriteImplWALOnly(
|
|
&write_thread_, write_options, my_batch, callback, log_used, log_ref,
|
|
&seq, sub_batch_cnt, pre_release_callback, kDoAssignOrder,
|
|
kDoPublishLastSeq, disable_memtable);
|
|
TEST_SYNC_POINT("DBImpl::WriteImpl:UnorderedWriteAfterWriteWAL");
|
|
if (!status.ok()) {
|
|
return status;
|
|
}
|
|
if (seq_used) {
|
|
*seq_used = seq;
|
|
}
|
|
if (!disable_memtable) {
|
|
TEST_SYNC_POINT("DBImpl::WriteImpl:BeforeUnorderedWriteMemtable");
|
|
status = UnorderedWriteMemtable(write_options, my_batch, callback,
|
|
log_ref, seq, sub_batch_cnt);
|
|
}
|
|
return status;
|
|
}
|
|
|
|
if (immutable_db_options_.enable_pipelined_write) {
|
|
return PipelinedWriteImpl(write_options, my_batch, callback, log_used,
|
|
log_ref, disable_memtable, seq_used);
|
|
}
|
|
|
|
PERF_TIMER_GUARD(write_pre_and_post_process_time);
|
|
WriteThread::Writer w(write_options, my_batch, callback, log_ref,
|
|
disable_memtable, batch_cnt, pre_release_callback);
|
|
StopWatch write_sw(immutable_db_options_.clock, stats_, DB_WRITE);
|
|
|
|
write_thread_.JoinBatchGroup(&w);
|
|
if (w.state == WriteThread::STATE_PARALLEL_MEMTABLE_WRITER) {
|
|
// we are a non-leader in a parallel group
|
|
|
|
if (w.ShouldWriteToMemtable()) {
|
|
PERF_TIMER_STOP(write_pre_and_post_process_time);
|
|
PERF_TIMER_GUARD(write_memtable_time);
|
|
|
|
ColumnFamilyMemTablesImpl column_family_memtables(
|
|
versions_->GetColumnFamilySet());
|
|
w.status = WriteBatchInternal::InsertInto(
|
|
&w, w.sequence, &column_family_memtables, &flush_scheduler_,
|
|
&trim_history_scheduler_,
|
|
write_options.ignore_missing_column_families, 0 /*log_number*/, this,
|
|
true /*concurrent_memtable_writes*/, seq_per_batch_, w.batch_cnt,
|
|
batch_per_txn_, write_options.memtable_insert_hint_per_batch);
|
|
|
|
PERF_TIMER_START(write_pre_and_post_process_time);
|
|
}
|
|
|
|
if (write_thread_.CompleteParallelMemTableWriter(&w)) {
|
|
// we're responsible for exit batch group
|
|
// TODO(myabandeh): propagate status to write_group
|
|
auto last_sequence = w.write_group->last_sequence;
|
|
versions_->SetLastSequence(last_sequence);
|
|
MemTableInsertStatusCheck(w.status);
|
|
write_thread_.ExitAsBatchGroupFollower(&w);
|
|
}
|
|
assert(w.state == WriteThread::STATE_COMPLETED);
|
|
// STATE_COMPLETED conditional below handles exit
|
|
}
|
|
if (w.state == WriteThread::STATE_COMPLETED) {
|
|
if (log_used != nullptr) {
|
|
*log_used = w.log_used;
|
|
}
|
|
if (seq_used != nullptr) {
|
|
*seq_used = w.sequence;
|
|
}
|
|
// write is complete and leader has updated sequence
|
|
return w.FinalStatus();
|
|
}
|
|
// else we are the leader of the write batch group
|
|
assert(w.state == WriteThread::STATE_GROUP_LEADER);
|
|
Status status;
|
|
// Once reaches this point, the current writer "w" will try to do its write
|
|
// job. It may also pick up some of the remaining writers in the "writers_"
|
|
// when it finds suitable, and finish them in the same write batch.
|
|
// This is how a write job could be done by the other writer.
|
|
WriteContext write_context;
|
|
WriteThread::WriteGroup write_group;
|
|
bool in_parallel_group = false;
|
|
uint64_t last_sequence = kMaxSequenceNumber;
|
|
|
|
mutex_.Lock();
|
|
|
|
bool need_log_sync = write_options.sync;
|
|
bool need_log_dir_sync = need_log_sync && !log_dir_synced_;
|
|
assert(!two_write_queues_ || !disable_memtable);
|
|
{
|
|
// With concurrent writes we do preprocess only in the write thread that
|
|
// also does write to memtable to avoid sync issue on shared data structure
|
|
// with the other thread
|
|
|
|
// PreprocessWrite does its own perf timing.
|
|
PERF_TIMER_STOP(write_pre_and_post_process_time);
|
|
|
|
status = PreprocessWrite(write_options, &need_log_sync, &write_context);
|
|
if (!two_write_queues_) {
|
|
// Assign it after ::PreprocessWrite since the sequence might advance
|
|
// inside it by WriteRecoverableState
|
|
last_sequence = versions_->LastSequence();
|
|
}
|
|
|
|
PERF_TIMER_START(write_pre_and_post_process_time);
|
|
}
|
|
log::Writer* log_writer = logs_.back().writer;
|
|
|
|
mutex_.Unlock();
|
|
|
|
// Add to log and apply to memtable. We can release the lock
|
|
// during this phase since &w is currently responsible for logging
|
|
// and protects against concurrent loggers and concurrent writes
|
|
// into memtables
|
|
|
|
TEST_SYNC_POINT("DBImpl::WriteImpl:BeforeLeaderEnters");
|
|
last_batch_group_size_ =
|
|
write_thread_.EnterAsBatchGroupLeader(&w, &write_group);
|
|
|
|
IOStatus io_s;
|
|
Status pre_release_cb_status;
|
|
if (status.ok()) {
|
|
// TODO: this use of operator bool on `tracer_` can avoid unnecessary lock
|
|
// grabs but does not seem thread-safe.
|
|
if (tracer_) {
|
|
InstrumentedMutexLock lock(&trace_mutex_);
|
|
if (tracer_ && tracer_->IsWriteOrderPreserved()) {
|
|
for (auto* writer : write_group) {
|
|
// TODO: maybe handle the tracing status?
|
|
tracer_->Write(writer->batch).PermitUncheckedError();
|
|
}
|
|
}
|
|
}
|
|
// Rules for when we can update the memtable concurrently
|
|
// 1. supported by memtable
|
|
// 2. Puts are not okay if inplace_update_support
|
|
// 3. Merges are not okay
|
|
//
|
|
// Rules 1..2 are enforced by checking the options
|
|
// during startup (CheckConcurrentWritesSupported), so if
|
|
// options.allow_concurrent_memtable_write is true then they can be
|
|
// assumed to be true. Rule 3 is checked for each batch. We could
|
|
// relax rules 2 if we could prevent write batches from referring
|
|
// more than once to a particular key.
|
|
bool parallel = immutable_db_options_.allow_concurrent_memtable_write &&
|
|
write_group.size > 1;
|
|
size_t total_count = 0;
|
|
size_t valid_batches = 0;
|
|
size_t total_byte_size = 0;
|
|
size_t pre_release_callback_cnt = 0;
|
|
for (auto* writer : write_group) {
|
|
assert(writer);
|
|
if (writer->CheckCallback(this)) {
|
|
valid_batches += writer->batch_cnt;
|
|
if (writer->ShouldWriteToMemtable()) {
|
|
total_count += WriteBatchInternal::Count(writer->batch);
|
|
parallel = parallel && !writer->batch->HasMerge();
|
|
}
|
|
total_byte_size = WriteBatchInternal::AppendedByteSize(
|
|
total_byte_size, WriteBatchInternal::ByteSize(writer->batch));
|
|
if (writer->pre_release_callback) {
|
|
pre_release_callback_cnt++;
|
|
}
|
|
}
|
|
}
|
|
// Note about seq_per_batch_: either disableWAL is set for the entire write
|
|
// group or not. In either case we inc seq for each write batch with no
|
|
// failed callback. This means that there could be a batch with
|
|
// disalbe_memtable in between; although we do not write this batch to
|
|
// memtable it still consumes a seq. Otherwise, if !seq_per_batch_, we inc
|
|
// the seq per valid written key to mem.
|
|
size_t seq_inc = seq_per_batch_ ? valid_batches : total_count;
|
|
|
|
const bool concurrent_update = two_write_queues_;
|
|
// Update stats while we are an exclusive group leader, so we know
|
|
// that nobody else can be writing to these particular stats.
|
|
// We're optimistic, updating the stats before we successfully
|
|
// commit. That lets us release our leader status early.
|
|
auto stats = default_cf_internal_stats_;
|
|
stats->AddDBStats(InternalStats::kIntStatsNumKeysWritten, total_count,
|
|
concurrent_update);
|
|
RecordTick(stats_, NUMBER_KEYS_WRITTEN, total_count);
|
|
stats->AddDBStats(InternalStats::kIntStatsBytesWritten, total_byte_size,
|
|
concurrent_update);
|
|
RecordTick(stats_, BYTES_WRITTEN, total_byte_size);
|
|
stats->AddDBStats(InternalStats::kIntStatsWriteDoneBySelf, 1,
|
|
concurrent_update);
|
|
RecordTick(stats_, WRITE_DONE_BY_SELF);
|
|
auto write_done_by_other = write_group.size - 1;
|
|
if (write_done_by_other > 0) {
|
|
stats->AddDBStats(InternalStats::kIntStatsWriteDoneByOther,
|
|
write_done_by_other, concurrent_update);
|
|
RecordTick(stats_, WRITE_DONE_BY_OTHER, write_done_by_other);
|
|
}
|
|
RecordInHistogram(stats_, BYTES_PER_WRITE, total_byte_size);
|
|
|
|
if (write_options.disableWAL) {
|
|
has_unpersisted_data_.store(true, std::memory_order_relaxed);
|
|
}
|
|
|
|
PERF_TIMER_STOP(write_pre_and_post_process_time);
|
|
|
|
if (!two_write_queues_) {
|
|
if (status.ok() && !write_options.disableWAL) {
|
|
PERF_TIMER_GUARD(write_wal_time);
|
|
io_s = WriteToWAL(write_group, log_writer, log_used, need_log_sync,
|
|
need_log_dir_sync, last_sequence + 1);
|
|
}
|
|
} else {
|
|
if (status.ok() && !write_options.disableWAL) {
|
|
PERF_TIMER_GUARD(write_wal_time);
|
|
// LastAllocatedSequence is increased inside WriteToWAL under
|
|
// wal_write_mutex_ to ensure ordered events in WAL
|
|
io_s = ConcurrentWriteToWAL(write_group, log_used, &last_sequence,
|
|
seq_inc);
|
|
} else {
|
|
// Otherwise we inc seq number for memtable writes
|
|
last_sequence = versions_->FetchAddLastAllocatedSequence(seq_inc);
|
|
}
|
|
}
|
|
status = io_s;
|
|
assert(last_sequence != kMaxSequenceNumber);
|
|
const SequenceNumber current_sequence = last_sequence + 1;
|
|
last_sequence += seq_inc;
|
|
|
|
// PreReleaseCallback is called after WAL write and before memtable write
|
|
if (status.ok()) {
|
|
SequenceNumber next_sequence = current_sequence;
|
|
size_t index = 0;
|
|
// Note: the logic for advancing seq here must be consistent with the
|
|
// logic in WriteBatchInternal::InsertInto(write_group...) as well as
|
|
// with WriteBatchInternal::InsertInto(write_batch...) that is called on
|
|
// the merged batch during recovery from the WAL.
|
|
for (auto* writer : write_group) {
|
|
if (writer->CallbackFailed()) {
|
|
continue;
|
|
}
|
|
writer->sequence = next_sequence;
|
|
if (writer->pre_release_callback) {
|
|
Status ws = writer->pre_release_callback->Callback(
|
|
writer->sequence, disable_memtable, writer->log_used, index++,
|
|
pre_release_callback_cnt);
|
|
if (!ws.ok()) {
|
|
status = pre_release_cb_status = ws;
|
|
break;
|
|
}
|
|
}
|
|
if (seq_per_batch_) {
|
|
assert(writer->batch_cnt);
|
|
next_sequence += writer->batch_cnt;
|
|
} else if (writer->ShouldWriteToMemtable()) {
|
|
next_sequence += WriteBatchInternal::Count(writer->batch);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (status.ok()) {
|
|
PERF_TIMER_GUARD(write_memtable_time);
|
|
|
|
if (!parallel) {
|
|
// w.sequence will be set inside InsertInto
|
|
w.status = WriteBatchInternal::InsertInto(
|
|
write_group, current_sequence, column_family_memtables_.get(),
|
|
&flush_scheduler_, &trim_history_scheduler_,
|
|
write_options.ignore_missing_column_families,
|
|
0 /*recovery_log_number*/, this, parallel, seq_per_batch_,
|
|
batch_per_txn_);
|
|
} else {
|
|
write_group.last_sequence = last_sequence;
|
|
write_thread_.LaunchParallelMemTableWriters(&write_group);
|
|
in_parallel_group = true;
|
|
|
|
// Each parallel follower is doing each own writes. The leader should
|
|
// also do its own.
|
|
if (w.ShouldWriteToMemtable()) {
|
|
ColumnFamilyMemTablesImpl column_family_memtables(
|
|
versions_->GetColumnFamilySet());
|
|
assert(w.sequence == current_sequence);
|
|
w.status = WriteBatchInternal::InsertInto(
|
|
&w, w.sequence, &column_family_memtables, &flush_scheduler_,
|
|
&trim_history_scheduler_,
|
|
write_options.ignore_missing_column_families, 0 /*log_number*/,
|
|
this, true /*concurrent_memtable_writes*/, seq_per_batch_,
|
|
w.batch_cnt, batch_per_txn_,
|
|
write_options.memtable_insert_hint_per_batch);
|
|
}
|
|
}
|
|
if (seq_used != nullptr) {
|
|
*seq_used = w.sequence;
|
|
}
|
|
}
|
|
}
|
|
PERF_TIMER_START(write_pre_and_post_process_time);
|
|
|
|
if (!w.CallbackFailed()) {
|
|
if (!io_s.ok()) {
|
|
assert(pre_release_cb_status.ok());
|
|
IOStatusCheck(io_s);
|
|
} else {
|
|
WriteStatusCheck(pre_release_cb_status);
|
|
}
|
|
} else {
|
|
assert(io_s.ok() && pre_release_cb_status.ok());
|
|
}
|
|
|
|
if (need_log_sync) {
|
|
mutex_.Lock();
|
|
if (status.ok()) {
|
|
status = MarkLogsSynced(logfile_number_, need_log_dir_sync);
|
|
} else {
|
|
MarkLogsNotSynced(logfile_number_);
|
|
}
|
|
mutex_.Unlock();
|
|
// Requesting sync with two_write_queues_ is expected to be very rare. We
|
|
// hence provide a simple implementation that is not necessarily efficient.
|
|
if (two_write_queues_) {
|
|
if (manual_wal_flush_) {
|
|
status = FlushWAL(true);
|
|
} else {
|
|
status = SyncWAL();
|
|
}
|
|
}
|
|
}
|
|
|
|
bool should_exit_batch_group = true;
|
|
if (in_parallel_group) {
|
|
// CompleteParallelWorker returns true if this thread should
|
|
// handle exit, false means somebody else did
|
|
should_exit_batch_group = write_thread_.CompleteParallelMemTableWriter(&w);
|
|
}
|
|
if (should_exit_batch_group) {
|
|
if (status.ok()) {
|
|
// Note: if we are to resume after non-OK statuses we need to revisit how
|
|
// we reacts to non-OK statuses here.
|
|
versions_->SetLastSequence(last_sequence);
|
|
}
|
|
MemTableInsertStatusCheck(w.status);
|
|
write_thread_.ExitAsBatchGroupLeader(write_group, status);
|
|
}
|
|
|
|
if (status.ok()) {
|
|
status = w.FinalStatus();
|
|
}
|
|
return status;
|
|
}
|
|
|
|
Status DBImpl::PipelinedWriteImpl(const WriteOptions& write_options,
|
|
WriteBatch* my_batch, WriteCallback* callback,
|
|
uint64_t* log_used, uint64_t log_ref,
|
|
bool disable_memtable, uint64_t* seq_used) {
|
|
PERF_TIMER_GUARD(write_pre_and_post_process_time);
|
|
StopWatch write_sw(immutable_db_options_.clock, stats_, DB_WRITE);
|
|
|
|
WriteContext write_context;
|
|
|
|
WriteThread::Writer w(write_options, my_batch, callback, log_ref,
|
|
disable_memtable, /*_batch_cnt=*/0,
|
|
/*_pre_release_callback=*/nullptr);
|
|
write_thread_.JoinBatchGroup(&w);
|
|
TEST_SYNC_POINT("DBImplWrite::PipelinedWriteImpl:AfterJoinBatchGroup");
|
|
if (w.state == WriteThread::STATE_GROUP_LEADER) {
|
|
WriteThread::WriteGroup wal_write_group;
|
|
if (w.callback && !w.callback->AllowWriteBatching()) {
|
|
write_thread_.WaitForMemTableWriters();
|
|
}
|
|
mutex_.Lock();
|
|
bool need_log_sync = !write_options.disableWAL && write_options.sync;
|
|
bool need_log_dir_sync = need_log_sync && !log_dir_synced_;
|
|
// PreprocessWrite does its own perf timing.
|
|
PERF_TIMER_STOP(write_pre_and_post_process_time);
|
|
w.status = PreprocessWrite(write_options, &need_log_sync, &write_context);
|
|
PERF_TIMER_START(write_pre_and_post_process_time);
|
|
log::Writer* log_writer = logs_.back().writer;
|
|
mutex_.Unlock();
|
|
|
|
// This can set non-OK status if callback fail.
|
|
last_batch_group_size_ =
|
|
write_thread_.EnterAsBatchGroupLeader(&w, &wal_write_group);
|
|
const SequenceNumber current_sequence =
|
|
write_thread_.UpdateLastSequence(versions_->LastSequence()) + 1;
|
|
size_t total_count = 0;
|
|
size_t total_byte_size = 0;
|
|
|
|
if (w.status.ok()) {
|
|
// TODO: this use of operator bool on `tracer_` can avoid unnecessary lock
|
|
// grabs but does not seem thread-safe.
|
|
if (tracer_) {
|
|
InstrumentedMutexLock lock(&trace_mutex_);
|
|
if (tracer_ != nullptr && tracer_->IsWriteOrderPreserved()) {
|
|
for (auto* writer : wal_write_group) {
|
|
// TODO: maybe handle the tracing status?
|
|
tracer_->Write(writer->batch).PermitUncheckedError();
|
|
}
|
|
}
|
|
}
|
|
SequenceNumber next_sequence = current_sequence;
|
|
for (auto* writer : wal_write_group) {
|
|
assert(writer);
|
|
if (writer->CheckCallback(this)) {
|
|
if (writer->ShouldWriteToMemtable()) {
|
|
writer->sequence = next_sequence;
|
|
size_t count = WriteBatchInternal::Count(writer->batch);
|
|
next_sequence += count;
|
|
total_count += count;
|
|
}
|
|
total_byte_size = WriteBatchInternal::AppendedByteSize(
|
|
total_byte_size, WriteBatchInternal::ByteSize(writer->batch));
|
|
}
|
|
}
|
|
if (w.disable_wal) {
|
|
has_unpersisted_data_.store(true, std::memory_order_relaxed);
|
|
}
|
|
write_thread_.UpdateLastSequence(current_sequence + total_count - 1);
|
|
}
|
|
|
|
auto stats = default_cf_internal_stats_;
|
|
stats->AddDBStats(InternalStats::kIntStatsNumKeysWritten, total_count);
|
|
RecordTick(stats_, NUMBER_KEYS_WRITTEN, total_count);
|
|
stats->AddDBStats(InternalStats::kIntStatsBytesWritten, total_byte_size);
|
|
RecordTick(stats_, BYTES_WRITTEN, total_byte_size);
|
|
RecordInHistogram(stats_, BYTES_PER_WRITE, total_byte_size);
|
|
|
|
PERF_TIMER_STOP(write_pre_and_post_process_time);
|
|
|
|
IOStatus io_s;
|
|
io_s.PermitUncheckedError(); // Allow io_s to be uninitialized
|
|
|
|
if (w.status.ok() && !write_options.disableWAL) {
|
|
PERF_TIMER_GUARD(write_wal_time);
|
|
stats->AddDBStats(InternalStats::kIntStatsWriteDoneBySelf, 1);
|
|
RecordTick(stats_, WRITE_DONE_BY_SELF, 1);
|
|
if (wal_write_group.size > 1) {
|
|
stats->AddDBStats(InternalStats::kIntStatsWriteDoneByOther,
|
|
wal_write_group.size - 1);
|
|
RecordTick(stats_, WRITE_DONE_BY_OTHER, wal_write_group.size - 1);
|
|
}
|
|
io_s = WriteToWAL(wal_write_group, log_writer, log_used, need_log_sync,
|
|
need_log_dir_sync, current_sequence);
|
|
w.status = io_s;
|
|
}
|
|
|
|
if (!w.CallbackFailed()) {
|
|
if (!io_s.ok()) {
|
|
IOStatusCheck(io_s);
|
|
} else {
|
|
WriteStatusCheck(w.status);
|
|
}
|
|
}
|
|
|
|
if (need_log_sync) {
|
|
mutex_.Lock();
|
|
if (w.status.ok()) {
|
|
w.status = MarkLogsSynced(logfile_number_, need_log_dir_sync);
|
|
} else {
|
|
MarkLogsNotSynced(logfile_number_);
|
|
}
|
|
mutex_.Unlock();
|
|
}
|
|
|
|
write_thread_.ExitAsBatchGroupLeader(wal_write_group, w.status);
|
|
}
|
|
|
|
// NOTE: the memtable_write_group is declared before the following
|
|
// `if` statement because its lifetime needs to be longer
|
|
// that the inner context of the `if` as a reference to it
|
|
// may be used further below within the outer _write_thread
|
|
WriteThread::WriteGroup memtable_write_group;
|
|
|
|
if (w.state == WriteThread::STATE_MEMTABLE_WRITER_LEADER) {
|
|
PERF_TIMER_GUARD(write_memtable_time);
|
|
assert(w.ShouldWriteToMemtable());
|
|
write_thread_.EnterAsMemTableWriter(&w, &memtable_write_group);
|
|
if (memtable_write_group.size > 1 &&
|
|
immutable_db_options_.allow_concurrent_memtable_write) {
|
|
write_thread_.LaunchParallelMemTableWriters(&memtable_write_group);
|
|
} else {
|
|
memtable_write_group.status = WriteBatchInternal::InsertInto(
|
|
memtable_write_group, w.sequence, column_family_memtables_.get(),
|
|
&flush_scheduler_, &trim_history_scheduler_,
|
|
write_options.ignore_missing_column_families, 0 /*log_number*/, this,
|
|
false /*concurrent_memtable_writes*/, seq_per_batch_, batch_per_txn_);
|
|
versions_->SetLastSequence(memtable_write_group.last_sequence);
|
|
write_thread_.ExitAsMemTableWriter(&w, memtable_write_group);
|
|
}
|
|
} else {
|
|
// NOTE: the memtable_write_group is never really used,
|
|
// so we need to set its status to pass ASSERT_STATUS_CHECKED
|
|
memtable_write_group.status.PermitUncheckedError();
|
|
}
|
|
|
|
if (w.state == WriteThread::STATE_PARALLEL_MEMTABLE_WRITER) {
|
|
assert(w.ShouldWriteToMemtable());
|
|
ColumnFamilyMemTablesImpl column_family_memtables(
|
|
versions_->GetColumnFamilySet());
|
|
w.status = WriteBatchInternal::InsertInto(
|
|
&w, w.sequence, &column_family_memtables, &flush_scheduler_,
|
|
&trim_history_scheduler_, write_options.ignore_missing_column_families,
|
|
0 /*log_number*/, this, true /*concurrent_memtable_writes*/,
|
|
false /*seq_per_batch*/, 0 /*batch_cnt*/, true /*batch_per_txn*/,
|
|
write_options.memtable_insert_hint_per_batch);
|
|
if (write_thread_.CompleteParallelMemTableWriter(&w)) {
|
|
MemTableInsertStatusCheck(w.status);
|
|
versions_->SetLastSequence(w.write_group->last_sequence);
|
|
write_thread_.ExitAsMemTableWriter(&w, *w.write_group);
|
|
}
|
|
}
|
|
if (seq_used != nullptr) {
|
|
*seq_used = w.sequence;
|
|
}
|
|
|
|
assert(w.state == WriteThread::STATE_COMPLETED);
|
|
return w.FinalStatus();
|
|
}
|
|
|
|
Status DBImpl::UnorderedWriteMemtable(const WriteOptions& write_options,
|
|
WriteBatch* my_batch,
|
|
WriteCallback* callback, uint64_t log_ref,
|
|
SequenceNumber seq,
|
|
const size_t sub_batch_cnt) {
|
|
PERF_TIMER_GUARD(write_pre_and_post_process_time);
|
|
StopWatch write_sw(immutable_db_options_.clock, stats_, DB_WRITE);
|
|
|
|
WriteThread::Writer w(write_options, my_batch, callback, log_ref,
|
|
false /*disable_memtable*/);
|
|
|
|
if (w.CheckCallback(this) && w.ShouldWriteToMemtable()) {
|
|
w.sequence = seq;
|
|
size_t total_count = WriteBatchInternal::Count(my_batch);
|
|
InternalStats* stats = default_cf_internal_stats_;
|
|
stats->AddDBStats(InternalStats::kIntStatsNumKeysWritten, total_count);
|
|
RecordTick(stats_, NUMBER_KEYS_WRITTEN, total_count);
|
|
|
|
ColumnFamilyMemTablesImpl column_family_memtables(
|
|
versions_->GetColumnFamilySet());
|
|
w.status = WriteBatchInternal::InsertInto(
|
|
&w, w.sequence, &column_family_memtables, &flush_scheduler_,
|
|
&trim_history_scheduler_, write_options.ignore_missing_column_families,
|
|
0 /*log_number*/, this, true /*concurrent_memtable_writes*/,
|
|
seq_per_batch_, sub_batch_cnt, true /*batch_per_txn*/,
|
|
write_options.memtable_insert_hint_per_batch);
|
|
if (write_options.disableWAL) {
|
|
has_unpersisted_data_.store(true, std::memory_order_relaxed);
|
|
}
|
|
}
|
|
|
|
size_t pending_cnt = pending_memtable_writes_.fetch_sub(1) - 1;
|
|
if (pending_cnt == 0) {
|
|
// switch_cv_ waits until pending_memtable_writes_ = 0. Locking its mutex
|
|
// before notify ensures that cv is in waiting state when it is notified
|
|
// thus not missing the update to pending_memtable_writes_ even though it is
|
|
// not modified under the mutex.
|
|
std::lock_guard<std::mutex> lck(switch_mutex_);
|
|
switch_cv_.notify_all();
|
|
}
|
|
WriteStatusCheck(w.status);
|
|
|
|
if (!w.FinalStatus().ok()) {
|
|
return w.FinalStatus();
|
|
}
|
|
return Status::OK();
|
|
}
|
|
|
|
// The 2nd write queue. If enabled it will be used only for WAL-only writes.
|
|
// This is the only queue that updates LastPublishedSequence which is only
|
|
// applicable in a two-queue setting.
|
|
Status DBImpl::WriteImplWALOnly(
|
|
WriteThread* write_thread, const WriteOptions& write_options,
|
|
WriteBatch* my_batch, WriteCallback* callback, uint64_t* log_used,
|
|
const uint64_t log_ref, uint64_t* seq_used, const size_t sub_batch_cnt,
|
|
PreReleaseCallback* pre_release_callback, const AssignOrder assign_order,
|
|
const PublishLastSeq publish_last_seq, const bool disable_memtable) {
|
|
PERF_TIMER_GUARD(write_pre_and_post_process_time);
|
|
WriteThread::Writer w(write_options, my_batch, callback, log_ref,
|
|
disable_memtable, sub_batch_cnt, pre_release_callback);
|
|
StopWatch write_sw(immutable_db_options_.clock, stats_, DB_WRITE);
|
|
|
|
write_thread->JoinBatchGroup(&w);
|
|
assert(w.state != WriteThread::STATE_PARALLEL_MEMTABLE_WRITER);
|
|
if (w.state == WriteThread::STATE_COMPLETED) {
|
|
if (log_used != nullptr) {
|
|
*log_used = w.log_used;
|
|
}
|
|
if (seq_used != nullptr) {
|
|
*seq_used = w.sequence;
|
|
}
|
|
return w.FinalStatus();
|
|
}
|
|
// else we are the leader of the write batch group
|
|
assert(w.state == WriteThread::STATE_GROUP_LEADER);
|
|
|
|
if (publish_last_seq == kDoPublishLastSeq) {
|
|
Status status;
|
|
|
|
// Currently we only use kDoPublishLastSeq in unordered_write
|
|
assert(immutable_db_options_.unordered_write);
|
|
WriteContext write_context;
|
|
if (error_handler_.IsDBStopped()) {
|
|
status = error_handler_.GetBGError();
|
|
}
|
|
// TODO(myabandeh): Make preliminary checks thread-safe so we could do them
|
|
// without paying the cost of obtaining the mutex.
|
|
if (status.ok()) {
|
|
InstrumentedMutexLock l(&mutex_);
|
|
bool need_log_sync = false;
|
|
status = PreprocessWrite(write_options, &need_log_sync, &write_context);
|
|
WriteStatusCheckOnLocked(status);
|
|
}
|
|
if (!status.ok()) {
|
|
WriteThread::WriteGroup write_group;
|
|
write_thread->EnterAsBatchGroupLeader(&w, &write_group);
|
|
write_thread->ExitAsBatchGroupLeader(write_group, status);
|
|
return status;
|
|
}
|
|
}
|
|
|
|
WriteThread::WriteGroup write_group;
|
|
uint64_t last_sequence;
|
|
write_thread->EnterAsBatchGroupLeader(&w, &write_group);
|
|
// Note: no need to update last_batch_group_size_ here since the batch writes
|
|
// to WAL only
|
|
// TODO: this use of operator bool on `tracer_` can avoid unnecessary lock
|
|
// grabs but does not seem thread-safe.
|
|
if (tracer_) {
|
|
InstrumentedMutexLock lock(&trace_mutex_);
|
|
if (tracer_ != nullptr && tracer_->IsWriteOrderPreserved()) {
|
|
for (auto* writer : write_group) {
|
|
// TODO: maybe handle the tracing status?
|
|
tracer_->Write(writer->batch).PermitUncheckedError();
|
|
}
|
|
}
|
|
}
|
|
|
|
size_t pre_release_callback_cnt = 0;
|
|
size_t total_byte_size = 0;
|
|
for (auto* writer : write_group) {
|
|
assert(writer);
|
|
if (writer->CheckCallback(this)) {
|
|
total_byte_size = WriteBatchInternal::AppendedByteSize(
|
|
total_byte_size, WriteBatchInternal::ByteSize(writer->batch));
|
|
if (writer->pre_release_callback) {
|
|
pre_release_callback_cnt++;
|
|
}
|
|
}
|
|
}
|
|
|
|
const bool concurrent_update = true;
|
|
// Update stats while we are an exclusive group leader, so we know
|
|
// that nobody else can be writing to these particular stats.
|
|
// We're optimistic, updating the stats before we successfully
|
|
// commit. That lets us release our leader status early.
|
|
auto stats = default_cf_internal_stats_;
|
|
stats->AddDBStats(InternalStats::kIntStatsBytesWritten, total_byte_size,
|
|
concurrent_update);
|
|
RecordTick(stats_, BYTES_WRITTEN, total_byte_size);
|
|
stats->AddDBStats(InternalStats::kIntStatsWriteDoneBySelf, 1,
|
|
concurrent_update);
|
|
RecordTick(stats_, WRITE_DONE_BY_SELF);
|
|
auto write_done_by_other = write_group.size - 1;
|
|
if (write_done_by_other > 0) {
|
|
stats->AddDBStats(InternalStats::kIntStatsWriteDoneByOther,
|
|
write_done_by_other, concurrent_update);
|
|
RecordTick(stats_, WRITE_DONE_BY_OTHER, write_done_by_other);
|
|
}
|
|
RecordInHistogram(stats_, BYTES_PER_WRITE, total_byte_size);
|
|
|
|
PERF_TIMER_STOP(write_pre_and_post_process_time);
|
|
|
|
PERF_TIMER_GUARD(write_wal_time);
|
|
// LastAllocatedSequence is increased inside WriteToWAL under
|
|
// wal_write_mutex_ to ensure ordered events in WAL
|
|
size_t seq_inc = 0 /* total_count */;
|
|
if (assign_order == kDoAssignOrder) {
|
|
size_t total_batch_cnt = 0;
|
|
for (auto* writer : write_group) {
|
|
assert(writer->batch_cnt || !seq_per_batch_);
|
|
if (!writer->CallbackFailed()) {
|
|
total_batch_cnt += writer->batch_cnt;
|
|
}
|
|
}
|
|
seq_inc = total_batch_cnt;
|
|
}
|
|
Status status;
|
|
IOStatus io_s;
|
|
io_s.PermitUncheckedError(); // Allow io_s to be uninitialized
|
|
if (!write_options.disableWAL) {
|
|
io_s = ConcurrentWriteToWAL(write_group, log_used, &last_sequence, seq_inc);
|
|
status = io_s;
|
|
} else {
|
|
// Otherwise we inc seq number to do solely the seq allocation
|
|
last_sequence = versions_->FetchAddLastAllocatedSequence(seq_inc);
|
|
}
|
|
|
|
size_t memtable_write_cnt = 0;
|
|
auto curr_seq = last_sequence + 1;
|
|
for (auto* writer : write_group) {
|
|
if (writer->CallbackFailed()) {
|
|
continue;
|
|
}
|
|
writer->sequence = curr_seq;
|
|
if (assign_order == kDoAssignOrder) {
|
|
assert(writer->batch_cnt || !seq_per_batch_);
|
|
curr_seq += writer->batch_cnt;
|
|
}
|
|
if (!writer->disable_memtable) {
|
|
memtable_write_cnt++;
|
|
}
|
|
// else seq advances only by memtable writes
|
|
}
|
|
if (status.ok() && write_options.sync) {
|
|
assert(!write_options.disableWAL);
|
|
// Requesting sync with two_write_queues_ is expected to be very rare. We
|
|
// hance provide a simple implementation that is not necessarily efficient.
|
|
if (manual_wal_flush_) {
|
|
status = FlushWAL(true);
|
|
} else {
|
|
status = SyncWAL();
|
|
}
|
|
}
|
|
PERF_TIMER_START(write_pre_and_post_process_time);
|
|
|
|
if (!w.CallbackFailed()) {
|
|
if (!io_s.ok()) {
|
|
IOStatusCheck(io_s);
|
|
} else {
|
|
WriteStatusCheck(status);
|
|
}
|
|
}
|
|
if (status.ok()) {
|
|
size_t index = 0;
|
|
for (auto* writer : write_group) {
|
|
if (!writer->CallbackFailed() && writer->pre_release_callback) {
|
|
assert(writer->sequence != kMaxSequenceNumber);
|
|
Status ws = writer->pre_release_callback->Callback(
|
|
writer->sequence, disable_memtable, writer->log_used, index++,
|
|
pre_release_callback_cnt);
|
|
if (!ws.ok()) {
|
|
status = ws;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
if (publish_last_seq == kDoPublishLastSeq) {
|
|
versions_->SetLastSequence(last_sequence + seq_inc);
|
|
// Currently we only use kDoPublishLastSeq in unordered_write
|
|
assert(immutable_db_options_.unordered_write);
|
|
}
|
|
if (immutable_db_options_.unordered_write && status.ok()) {
|
|
pending_memtable_writes_ += memtable_write_cnt;
|
|
}
|
|
write_thread->ExitAsBatchGroupLeader(write_group, status);
|
|
if (status.ok()) {
|
|
status = w.FinalStatus();
|
|
}
|
|
if (seq_used != nullptr) {
|
|
*seq_used = w.sequence;
|
|
}
|
|
return status;
|
|
}
|
|
|
|
void DBImpl::WriteStatusCheckOnLocked(const Status& status) {
|
|
// Is setting bg_error_ enough here? This will at least stop
|
|
// compaction and fail any further writes.
|
|
// Caller must hold mutex_.
|
|
assert(!status.IsIOFenced() || !error_handler_.GetBGError().ok());
|
|
mutex_.AssertHeld();
|
|
if (immutable_db_options_.paranoid_checks && !status.ok() &&
|
|
!status.IsBusy() && !status.IsIncomplete()) {
|
|
// Maybe change the return status to void?
|
|
error_handler_.SetBGError(status, BackgroundErrorReason::kWriteCallback);
|
|
}
|
|
}
|
|
|
|
void DBImpl::WriteStatusCheck(const Status& status) {
|
|
// Is setting bg_error_ enough here? This will at least stop
|
|
// compaction and fail any further writes.
|
|
assert(!status.IsIOFenced() || !error_handler_.GetBGError().ok());
|
|
if (immutable_db_options_.paranoid_checks && !status.ok() &&
|
|
!status.IsBusy() && !status.IsIncomplete()) {
|
|
mutex_.Lock();
|
|
// Maybe change the return status to void?
|
|
error_handler_.SetBGError(status, BackgroundErrorReason::kWriteCallback);
|
|
mutex_.Unlock();
|
|
}
|
|
}
|
|
|
|
void DBImpl::IOStatusCheck(const IOStatus& io_status) {
|
|
// Is setting bg_error_ enough here? This will at least stop
|
|
// compaction and fail any further writes.
|
|
if ((immutable_db_options_.paranoid_checks && !io_status.ok() &&
|
|
!io_status.IsBusy() && !io_status.IsIncomplete()) ||
|
|
io_status.IsIOFenced()) {
|
|
mutex_.Lock();
|
|
// Maybe change the return status to void?
|
|
error_handler_.SetBGError(io_status, BackgroundErrorReason::kWriteCallback);
|
|
mutex_.Unlock();
|
|
}
|
|
}
|
|
|
|
void DBImpl::MemTableInsertStatusCheck(const Status& status) {
|
|
// A non-OK status here indicates that the state implied by the
|
|
// WAL has diverged from the in-memory state. This could be
|
|
// because of a corrupt write_batch (very bad), or because the
|
|
// client specified an invalid column family and didn't specify
|
|
// ignore_missing_column_families.
|
|
if (!status.ok()) {
|
|
mutex_.Lock();
|
|
assert(!error_handler_.IsBGWorkStopped());
|
|
// Maybe change the return status to void?
|
|
error_handler_.SetBGError(status, BackgroundErrorReason::kMemTable)
|
|
.PermitUncheckedError();
|
|
mutex_.Unlock();
|
|
}
|
|
}
|
|
|
|
Status DBImpl::PreprocessWrite(const WriteOptions& write_options,
|
|
bool* need_log_sync,
|
|
WriteContext* write_context) {
|
|
mutex_.AssertHeld();
|
|
assert(write_context != nullptr && need_log_sync != nullptr);
|
|
Status status;
|
|
|
|
if (error_handler_.IsDBStopped()) {
|
|
status = error_handler_.GetBGError();
|
|
}
|
|
|
|
PERF_TIMER_GUARD(write_scheduling_flushes_compactions_time);
|
|
|
|
assert(!single_column_family_mode_ ||
|
|
versions_->GetColumnFamilySet()->NumberOfColumnFamilies() == 1);
|
|
if (UNLIKELY(status.ok() && !single_column_family_mode_ &&
|
|
total_log_size_ > GetMaxTotalWalSize())) {
|
|
WaitForPendingWrites();
|
|
status = SwitchWAL(write_context);
|
|
}
|
|
|
|
if (UNLIKELY(status.ok() && write_buffer_manager_->ShouldFlush())) {
|
|
// Before a new memtable is added in SwitchMemtable(),
|
|
// write_buffer_manager_->ShouldFlush() will keep returning true. If another
|
|
// thread is writing to another DB with the same write buffer, they may also
|
|
// be flushed. We may end up with flushing much more DBs than needed. It's
|
|
// suboptimal but still correct.
|
|
WaitForPendingWrites();
|
|
status = HandleWriteBufferManagerFlush(write_context);
|
|
}
|
|
|
|
if (UNLIKELY(status.ok() && !trim_history_scheduler_.Empty())) {
|
|
status = TrimMemtableHistory(write_context);
|
|
}
|
|
|
|
if (UNLIKELY(status.ok() && !flush_scheduler_.Empty())) {
|
|
WaitForPendingWrites();
|
|
status = ScheduleFlushes(write_context);
|
|
}
|
|
|
|
PERF_TIMER_STOP(write_scheduling_flushes_compactions_time);
|
|
PERF_TIMER_GUARD(write_pre_and_post_process_time);
|
|
|
|
if (UNLIKELY(status.ok() && (write_controller_.IsStopped() ||
|
|
write_controller_.NeedsDelay()))) {
|
|
PERF_TIMER_STOP(write_pre_and_post_process_time);
|
|
PERF_TIMER_GUARD(write_delay_time);
|
|
// We don't know size of curent batch so that we always use the size
|
|
// for previous one. It might create a fairness issue that expiration
|
|
// might happen for smaller writes but larger writes can go through.
|
|
// Can optimize it if it is an issue.
|
|
status = DelayWrite(last_batch_group_size_, write_options);
|
|
PERF_TIMER_START(write_pre_and_post_process_time);
|
|
}
|
|
|
|
// If memory usage exceeded beyond a certain threshold,
|
|
// write_buffer_manager_->ShouldStall() returns true to all threads writing to
|
|
// all DBs and writers will be stalled.
|
|
// It does soft checking because WriteBufferManager::buffer_limit_ has already
|
|
// exceeded at this point so no new write (including current one) will go
|
|
// through until memory usage is decreased.
|
|
if (UNLIKELY(status.ok() && write_buffer_manager_->ShouldStall())) {
|
|
if (write_options.no_slowdown) {
|
|
status = Status::Incomplete("Write stall");
|
|
} else {
|
|
WriteBufferManagerStallWrites();
|
|
}
|
|
}
|
|
|
|
if (status.ok() && *need_log_sync) {
|
|
// Wait until the parallel syncs are finished. Any sync process has to sync
|
|
// the front log too so it is enough to check the status of front()
|
|
// We do a while loop since log_sync_cv_ is signalled when any sync is
|
|
// finished
|
|
// Note: there does not seem to be a reason to wait for parallel sync at
|
|
// this early step but it is not important since parallel sync (SyncWAL) and
|
|
// need_log_sync are usually not used together.
|
|
while (logs_.front().getting_synced) {
|
|
log_sync_cv_.Wait();
|
|
}
|
|
for (auto& log : logs_) {
|
|
assert(!log.getting_synced);
|
|
// This is just to prevent the logs to be synced by a parallel SyncWAL
|
|
// call. We will do the actual syncing later after we will write to the
|
|
// WAL.
|
|
// Note: there does not seem to be a reason to set this early before we
|
|
// actually write to the WAL
|
|
log.getting_synced = true;
|
|
}
|
|
} else {
|
|
*need_log_sync = false;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
WriteBatch* DBImpl::MergeBatch(const WriteThread::WriteGroup& write_group,
|
|
WriteBatch* tmp_batch, size_t* write_with_wal,
|
|
WriteBatch** to_be_cached_state) {
|
|
assert(write_with_wal != nullptr);
|
|
assert(tmp_batch != nullptr);
|
|
assert(*to_be_cached_state == nullptr);
|
|
WriteBatch* merged_batch = nullptr;
|
|
*write_with_wal = 0;
|
|
auto* leader = write_group.leader;
|
|
assert(!leader->disable_wal); // Same holds for all in the batch group
|
|
if (write_group.size == 1 && !leader->CallbackFailed() &&
|
|
leader->batch->GetWalTerminationPoint().is_cleared()) {
|
|
// we simply write the first WriteBatch to WAL if the group only
|
|
// contains one batch, that batch should be written to the WAL,
|
|
// and the batch is not wanting to be truncated
|
|
merged_batch = leader->batch;
|
|
if (WriteBatchInternal::IsLatestPersistentState(merged_batch)) {
|
|
*to_be_cached_state = merged_batch;
|
|
}
|
|
*write_with_wal = 1;
|
|
} else {
|
|
// WAL needs all of the batches flattened into a single batch.
|
|
// We could avoid copying here with an iov-like AddRecord
|
|
// interface
|
|
merged_batch = tmp_batch;
|
|
for (auto writer : write_group) {
|
|
if (!writer->CallbackFailed()) {
|
|
Status s = WriteBatchInternal::Append(merged_batch, writer->batch,
|
|
/*WAL_only*/ true);
|
|
// Always returns Status::OK.
|
|
assert(s.ok());
|
|
if (WriteBatchInternal::IsLatestPersistentState(writer->batch)) {
|
|
// We only need to cache the last of such write batch
|
|
*to_be_cached_state = writer->batch;
|
|
}
|
|
(*write_with_wal)++;
|
|
}
|
|
}
|
|
}
|
|
return merged_batch;
|
|
}
|
|
|
|
// When two_write_queues_ is disabled, this function is called from the only
|
|
// write thread. Otherwise this must be called holding log_write_mutex_.
|
|
IOStatus DBImpl::WriteToWAL(const WriteBatch& merged_batch,
|
|
log::Writer* log_writer, uint64_t* log_used,
|
|
uint64_t* log_size) {
|
|
assert(log_size != nullptr);
|
|
Slice log_entry = WriteBatchInternal::Contents(&merged_batch);
|
|
*log_size = log_entry.size();
|
|
// When two_write_queues_ WriteToWAL has to be protected from concurretn calls
|
|
// from the two queues anyway and log_write_mutex_ is already held. Otherwise
|
|
// if manual_wal_flush_ is enabled we need to protect log_writer->AddRecord
|
|
// from possible concurrent calls via the FlushWAL by the application.
|
|
const bool needs_locking = manual_wal_flush_ && !two_write_queues_;
|
|
// Due to performance cocerns of missed branch prediction penalize the new
|
|
// manual_wal_flush_ feature (by UNLIKELY) instead of the more common case
|
|
// when we do not need any locking.
|
|
if (UNLIKELY(needs_locking)) {
|
|
log_write_mutex_.Lock();
|
|
}
|
|
IOStatus io_s = log_writer->AddRecord(log_entry);
|
|
|
|
if (UNLIKELY(needs_locking)) {
|
|
log_write_mutex_.Unlock();
|
|
}
|
|
if (log_used != nullptr) {
|
|
*log_used = logfile_number_;
|
|
}
|
|
total_log_size_ += log_entry.size();
|
|
// TODO(myabandeh): it might be unsafe to access alive_log_files_.back() here
|
|
// since alive_log_files_ might be modified concurrently
|
|
alive_log_files_.back().AddSize(log_entry.size());
|
|
log_empty_ = false;
|
|
return io_s;
|
|
}
|
|
|
|
IOStatus DBImpl::WriteToWAL(const WriteThread::WriteGroup& write_group,
|
|
log::Writer* log_writer, uint64_t* log_used,
|
|
bool need_log_sync, bool need_log_dir_sync,
|
|
SequenceNumber sequence) {
|
|
IOStatus io_s;
|
|
assert(!write_group.leader->disable_wal);
|
|
// Same holds for all in the batch group
|
|
size_t write_with_wal = 0;
|
|
WriteBatch* to_be_cached_state = nullptr;
|
|
WriteBatch* merged_batch = MergeBatch(write_group, &tmp_batch_,
|
|
&write_with_wal, &to_be_cached_state);
|
|
if (merged_batch == write_group.leader->batch) {
|
|
write_group.leader->log_used = logfile_number_;
|
|
} else if (write_with_wal > 1) {
|
|
for (auto writer : write_group) {
|
|
writer->log_used = logfile_number_;
|
|
}
|
|
}
|
|
|
|
WriteBatchInternal::SetSequence(merged_batch, sequence);
|
|
|
|
uint64_t log_size;
|
|
io_s = WriteToWAL(*merged_batch, log_writer, log_used, &log_size);
|
|
if (to_be_cached_state) {
|
|
cached_recoverable_state_ = *to_be_cached_state;
|
|
cached_recoverable_state_empty_ = false;
|
|
}
|
|
|
|
if (io_s.ok() && need_log_sync) {
|
|
StopWatch sw(immutable_db_options_.clock, stats_, WAL_FILE_SYNC_MICROS);
|
|
// It's safe to access logs_ with unlocked mutex_ here because:
|
|
// - we've set getting_synced=true for all logs,
|
|
// so other threads won't pop from logs_ while we're here,
|
|
// - only writer thread can push to logs_, and we're in
|
|
// writer thread, so no one will push to logs_,
|
|
// - as long as other threads don't modify it, it's safe to read
|
|
// from std::deque from multiple threads concurrently.
|
|
//
|
|
// Sync operation should work with locked log_write_mutex_, because:
|
|
// when DBOptions.manual_wal_flush_ is set,
|
|
// FlushWAL function will be invoked by another thread.
|
|
// if without locked log_write_mutex_, the log file may get data
|
|
// corruption
|
|
|
|
const bool needs_locking = manual_wal_flush_ && !two_write_queues_;
|
|
if (UNLIKELY(needs_locking)) {
|
|
log_write_mutex_.Lock();
|
|
}
|
|
|
|
for (auto& log : logs_) {
|
|
io_s = log.writer->file()->Sync(immutable_db_options_.use_fsync);
|
|
if (!io_s.ok()) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (UNLIKELY(needs_locking)) {
|
|
log_write_mutex_.Unlock();
|
|
}
|
|
|
|
if (io_s.ok() && need_log_dir_sync) {
|
|
// We only sync WAL directory the first time WAL syncing is
|
|
// requested, so that in case users never turn on WAL sync,
|
|
// we can avoid the disk I/O in the write code path.
|
|
io_s = directories_.GetWalDir()->FsyncWithDirOptions(
|
|
IOOptions(), nullptr,
|
|
DirFsyncOptions(DirFsyncOptions::FsyncReason::kNewFileSynced));
|
|
}
|
|
}
|
|
|
|
if (merged_batch == &tmp_batch_) {
|
|
tmp_batch_.Clear();
|
|
}
|
|
if (io_s.ok()) {
|
|
auto stats = default_cf_internal_stats_;
|
|
if (need_log_sync) {
|
|
stats->AddDBStats(InternalStats::kIntStatsWalFileSynced, 1);
|
|
RecordTick(stats_, WAL_FILE_SYNCED);
|
|
}
|
|
stats->AddDBStats(InternalStats::kIntStatsWalFileBytes, log_size);
|
|
RecordTick(stats_, WAL_FILE_BYTES, log_size);
|
|
stats->AddDBStats(InternalStats::kIntStatsWriteWithWal, write_with_wal);
|
|
RecordTick(stats_, WRITE_WITH_WAL, write_with_wal);
|
|
}
|
|
return io_s;
|
|
}
|
|
|
|
IOStatus DBImpl::ConcurrentWriteToWAL(
|
|
const WriteThread::WriteGroup& write_group, uint64_t* log_used,
|
|
SequenceNumber* last_sequence, size_t seq_inc) {
|
|
IOStatus io_s;
|
|
|
|
assert(!write_group.leader->disable_wal);
|
|
// Same holds for all in the batch group
|
|
WriteBatch tmp_batch;
|
|
size_t write_with_wal = 0;
|
|
WriteBatch* to_be_cached_state = nullptr;
|
|
WriteBatch* merged_batch =
|
|
MergeBatch(write_group, &tmp_batch, &write_with_wal, &to_be_cached_state);
|
|
|
|
// We need to lock log_write_mutex_ since logs_ and alive_log_files might be
|
|
// pushed back concurrently
|
|
log_write_mutex_.Lock();
|
|
if (merged_batch == write_group.leader->batch) {
|
|
write_group.leader->log_used = logfile_number_;
|
|
} else if (write_with_wal > 1) {
|
|
for (auto writer : write_group) {
|
|
writer->log_used = logfile_number_;
|
|
}
|
|
}
|
|
*last_sequence = versions_->FetchAddLastAllocatedSequence(seq_inc);
|
|
auto sequence = *last_sequence + 1;
|
|
WriteBatchInternal::SetSequence(merged_batch, sequence);
|
|
|
|
log::Writer* log_writer = logs_.back().writer;
|
|
uint64_t log_size;
|
|
io_s = WriteToWAL(*merged_batch, log_writer, log_used, &log_size);
|
|
if (to_be_cached_state) {
|
|
cached_recoverable_state_ = *to_be_cached_state;
|
|
cached_recoverable_state_empty_ = false;
|
|
}
|
|
log_write_mutex_.Unlock();
|
|
|
|
if (io_s.ok()) {
|
|
const bool concurrent = true;
|
|
auto stats = default_cf_internal_stats_;
|
|
stats->AddDBStats(InternalStats::kIntStatsWalFileBytes, log_size,
|
|
concurrent);
|
|
RecordTick(stats_, WAL_FILE_BYTES, log_size);
|
|
stats->AddDBStats(InternalStats::kIntStatsWriteWithWal, write_with_wal,
|
|
concurrent);
|
|
RecordTick(stats_, WRITE_WITH_WAL, write_with_wal);
|
|
}
|
|
return io_s;
|
|
}
|
|
|
|
Status DBImpl::WriteRecoverableState() {
|
|
mutex_.AssertHeld();
|
|
if (!cached_recoverable_state_empty_) {
|
|
bool dont_care_bool;
|
|
SequenceNumber next_seq;
|
|
if (two_write_queues_) {
|
|
log_write_mutex_.Lock();
|
|
}
|
|
SequenceNumber seq;
|
|
if (two_write_queues_) {
|
|
seq = versions_->FetchAddLastAllocatedSequence(0);
|
|
} else {
|
|
seq = versions_->LastSequence();
|
|
}
|
|
WriteBatchInternal::SetSequence(&cached_recoverable_state_, seq + 1);
|
|
auto status = WriteBatchInternal::InsertInto(
|
|
&cached_recoverable_state_, column_family_memtables_.get(),
|
|
&flush_scheduler_, &trim_history_scheduler_, true,
|
|
0 /*recovery_log_number*/, this, false /* concurrent_memtable_writes */,
|
|
&next_seq, &dont_care_bool, seq_per_batch_);
|
|
auto last_seq = next_seq - 1;
|
|
if (two_write_queues_) {
|
|
versions_->FetchAddLastAllocatedSequence(last_seq - seq);
|
|
versions_->SetLastPublishedSequence(last_seq);
|
|
}
|
|
versions_->SetLastSequence(last_seq);
|
|
if (two_write_queues_) {
|
|
log_write_mutex_.Unlock();
|
|
}
|
|
if (status.ok() && recoverable_state_pre_release_callback_) {
|
|
const bool DISABLE_MEMTABLE = true;
|
|
for (uint64_t sub_batch_seq = seq + 1;
|
|
sub_batch_seq < next_seq && status.ok(); sub_batch_seq++) {
|
|
uint64_t const no_log_num = 0;
|
|
// Unlock it since the callback might end up locking mutex. e.g.,
|
|
// AddCommitted -> AdvanceMaxEvictedSeq -> GetSnapshotListFromDB
|
|
mutex_.Unlock();
|
|
status = recoverable_state_pre_release_callback_->Callback(
|
|
sub_batch_seq, !DISABLE_MEMTABLE, no_log_num, 0, 1);
|
|
mutex_.Lock();
|
|
}
|
|
}
|
|
if (status.ok()) {
|
|
cached_recoverable_state_.Clear();
|
|
cached_recoverable_state_empty_ = true;
|
|
}
|
|
return status;
|
|
}
|
|
return Status::OK();
|
|
}
|
|
|
|
void DBImpl::SelectColumnFamiliesForAtomicFlush(
|
|
autovector<ColumnFamilyData*>* cfds) {
|
|
for (ColumnFamilyData* cfd : *versions_->GetColumnFamilySet()) {
|
|
if (cfd->IsDropped()) {
|
|
continue;
|
|
}
|
|
if (cfd->imm()->NumNotFlushed() != 0 || !cfd->mem()->IsEmpty() ||
|
|
!cached_recoverable_state_empty_.load()) {
|
|
cfds->push_back(cfd);
|
|
}
|
|
}
|
|
}
|
|
|
|
// Assign sequence number for atomic flush.
|
|
void DBImpl::AssignAtomicFlushSeq(const autovector<ColumnFamilyData*>& cfds) {
|
|
assert(immutable_db_options_.atomic_flush);
|
|
auto seq = versions_->LastSequence();
|
|
for (auto cfd : cfds) {
|
|
cfd->imm()->AssignAtomicFlushSeq(seq);
|
|
}
|
|
}
|
|
|
|
Status DBImpl::SwitchWAL(WriteContext* write_context) {
|
|
mutex_.AssertHeld();
|
|
assert(write_context != nullptr);
|
|
Status status;
|
|
|
|
if (alive_log_files_.begin()->getting_flushed) {
|
|
return status;
|
|
}
|
|
|
|
auto oldest_alive_log = alive_log_files_.begin()->number;
|
|
bool flush_wont_release_oldest_log = false;
|
|
if (allow_2pc()) {
|
|
auto oldest_log_with_uncommitted_prep =
|
|
logs_with_prep_tracker_.FindMinLogContainingOutstandingPrep();
|
|
|
|
assert(oldest_log_with_uncommitted_prep == 0 ||
|
|
oldest_log_with_uncommitted_prep >= oldest_alive_log);
|
|
if (oldest_log_with_uncommitted_prep > 0 &&
|
|
oldest_log_with_uncommitted_prep == oldest_alive_log) {
|
|
if (unable_to_release_oldest_log_) {
|
|
// we already attempted to flush all column families dependent on
|
|
// the oldest alive log but the log still contained uncommitted
|
|
// transactions so there is still nothing that we can do.
|
|
return status;
|
|
} else {
|
|
ROCKS_LOG_WARN(
|
|
immutable_db_options_.info_log,
|
|
"Unable to release oldest log due to uncommitted transaction");
|
|
unable_to_release_oldest_log_ = true;
|
|
flush_wont_release_oldest_log = true;
|
|
}
|
|
}
|
|
}
|
|
if (!flush_wont_release_oldest_log) {
|
|
// we only mark this log as getting flushed if we have successfully
|
|
// flushed all data in this log. If this log contains outstanding prepared
|
|
// transactions then we cannot flush this log until those transactions are
|
|
// commited.
|
|
unable_to_release_oldest_log_ = false;
|
|
alive_log_files_.begin()->getting_flushed = true;
|
|
}
|
|
|
|
ROCKS_LOG_INFO(
|
|
immutable_db_options_.info_log,
|
|
"Flushing all column families with data in WAL number %" PRIu64
|
|
". Total log size is %" PRIu64 " while max_total_wal_size is %" PRIu64,
|
|
oldest_alive_log, total_log_size_.load(), GetMaxTotalWalSize());
|
|
// no need to refcount because drop is happening in write thread, so can't
|
|
// happen while we're in the write thread
|
|
autovector<ColumnFamilyData*> cfds;
|
|
if (immutable_db_options_.atomic_flush) {
|
|
SelectColumnFamiliesForAtomicFlush(&cfds);
|
|
} else {
|
|
for (auto cfd : *versions_->GetColumnFamilySet()) {
|
|
if (cfd->IsDropped()) {
|
|
continue;
|
|
}
|
|
if (cfd->OldestLogToKeep() <= oldest_alive_log) {
|
|
cfds.push_back(cfd);
|
|
}
|
|
}
|
|
MaybeFlushStatsCF(&cfds);
|
|
}
|
|
WriteThread::Writer nonmem_w;
|
|
if (two_write_queues_) {
|
|
nonmem_write_thread_.EnterUnbatched(&nonmem_w, &mutex_);
|
|
}
|
|
|
|
for (const auto cfd : cfds) {
|
|
cfd->Ref();
|
|
status = SwitchMemtable(cfd, write_context);
|
|
cfd->UnrefAndTryDelete();
|
|
if (!status.ok()) {
|
|
break;
|
|
}
|
|
}
|
|
if (two_write_queues_) {
|
|
nonmem_write_thread_.ExitUnbatched(&nonmem_w);
|
|
}
|
|
|
|
if (status.ok()) {
|
|
if (immutable_db_options_.atomic_flush) {
|
|
AssignAtomicFlushSeq(cfds);
|
|
}
|
|
for (auto cfd : cfds) {
|
|
cfd->imm()->FlushRequested();
|
|
if (!immutable_db_options_.atomic_flush) {
|
|
FlushRequest flush_req;
|
|
GenerateFlushRequest({cfd}, &flush_req);
|
|
SchedulePendingFlush(flush_req, FlushReason::kWalFull);
|
|
}
|
|
}
|
|
if (immutable_db_options_.atomic_flush) {
|
|
FlushRequest flush_req;
|
|
GenerateFlushRequest(cfds, &flush_req);
|
|
SchedulePendingFlush(flush_req, FlushReason::kWalFull);
|
|
}
|
|
MaybeScheduleFlushOrCompaction();
|
|
}
|
|
return status;
|
|
}
|
|
|
|
Status DBImpl::HandleWriteBufferManagerFlush(WriteContext* write_context) {
|
|
mutex_.AssertHeld();
|
|
assert(write_context != nullptr);
|
|
Status status;
|
|
|
|
// Before a new memtable is added in SwitchMemtable(),
|
|
// write_buffer_manager_->ShouldFlush() will keep returning true. If another
|
|
// thread is writing to another DB with the same write buffer, they may also
|
|
// be flushed. We may end up with flushing much more DBs than needed. It's
|
|
// suboptimal but still correct.
|
|
ROCKS_LOG_INFO(
|
|
immutable_db_options_.info_log,
|
|
"Flushing column family with oldest memtable entry. Write buffers are "
|
|
"using %" ROCKSDB_PRIszt " bytes out of a total of %" ROCKSDB_PRIszt ".",
|
|
write_buffer_manager_->memory_usage(),
|
|
write_buffer_manager_->buffer_size());
|
|
// no need to refcount because drop is happening in write thread, so can't
|
|
// happen while we're in the write thread
|
|
autovector<ColumnFamilyData*> cfds;
|
|
if (immutable_db_options_.atomic_flush) {
|
|
SelectColumnFamiliesForAtomicFlush(&cfds);
|
|
} else {
|
|
ColumnFamilyData* cfd_picked = nullptr;
|
|
SequenceNumber seq_num_for_cf_picked = kMaxSequenceNumber;
|
|
|
|
for (auto cfd : *versions_->GetColumnFamilySet()) {
|
|
if (cfd->IsDropped()) {
|
|
continue;
|
|
}
|
|
if (!cfd->mem()->IsEmpty()) {
|
|
// We only consider active mem table, hoping immutable memtable is
|
|
// already in the process of flushing.
|
|
uint64_t seq = cfd->mem()->GetCreationSeq();
|
|
if (cfd_picked == nullptr || seq < seq_num_for_cf_picked) {
|
|
cfd_picked = cfd;
|
|
seq_num_for_cf_picked = seq;
|
|
}
|
|
}
|
|
}
|
|
if (cfd_picked != nullptr) {
|
|
cfds.push_back(cfd_picked);
|
|
}
|
|
MaybeFlushStatsCF(&cfds);
|
|
}
|
|
|
|
WriteThread::Writer nonmem_w;
|
|
if (two_write_queues_) {
|
|
nonmem_write_thread_.EnterUnbatched(&nonmem_w, &mutex_);
|
|
}
|
|
for (const auto cfd : cfds) {
|
|
if (cfd->mem()->IsEmpty()) {
|
|
continue;
|
|
}
|
|
cfd->Ref();
|
|
status = SwitchMemtable(cfd, write_context);
|
|
cfd->UnrefAndTryDelete();
|
|
if (!status.ok()) {
|
|
break;
|
|
}
|
|
}
|
|
if (two_write_queues_) {
|
|
nonmem_write_thread_.ExitUnbatched(&nonmem_w);
|
|
}
|
|
|
|
if (status.ok()) {
|
|
if (immutable_db_options_.atomic_flush) {
|
|
AssignAtomicFlushSeq(cfds);
|
|
}
|
|
for (const auto cfd : cfds) {
|
|
cfd->imm()->FlushRequested();
|
|
if (!immutable_db_options_.atomic_flush) {
|
|
FlushRequest flush_req;
|
|
GenerateFlushRequest({cfd}, &flush_req);
|
|
SchedulePendingFlush(flush_req, FlushReason::kWriteBufferManager);
|
|
}
|
|
}
|
|
if (immutable_db_options_.atomic_flush) {
|
|
FlushRequest flush_req;
|
|
GenerateFlushRequest(cfds, &flush_req);
|
|
SchedulePendingFlush(flush_req, FlushReason::kWriteBufferManager);
|
|
}
|
|
MaybeScheduleFlushOrCompaction();
|
|
}
|
|
return status;
|
|
}
|
|
|
|
uint64_t DBImpl::GetMaxTotalWalSize() const {
|
|
mutex_.AssertHeld();
|
|
return mutable_db_options_.max_total_wal_size == 0
|
|
? 4 * max_total_in_memory_state_
|
|
: mutable_db_options_.max_total_wal_size;
|
|
}
|
|
|
|
// REQUIRES: mutex_ is held
|
|
// REQUIRES: this thread is currently at the front of the writer queue
|
|
Status DBImpl::DelayWrite(uint64_t num_bytes,
|
|
const WriteOptions& write_options) {
|
|
uint64_t time_delayed = 0;
|
|
bool delayed = false;
|
|
{
|
|
StopWatch sw(immutable_db_options_.clock, stats_, WRITE_STALL,
|
|
&time_delayed);
|
|
uint64_t delay =
|
|
write_controller_.GetDelay(immutable_db_options_.clock, num_bytes);
|
|
if (delay > 0) {
|
|
if (write_options.no_slowdown) {
|
|
return Status::Incomplete("Write stall");
|
|
}
|
|
TEST_SYNC_POINT("DBImpl::DelayWrite:Sleep");
|
|
|
|
// Notify write_thread_ about the stall so it can setup a barrier and
|
|
// fail any pending writers with no_slowdown
|
|
write_thread_.BeginWriteStall();
|
|
TEST_SYNC_POINT("DBImpl::DelayWrite:BeginWriteStallDone");
|
|
mutex_.Unlock();
|
|
// We will delay the write until we have slept for `delay` microseconds
|
|
// or we don't need a delay anymore. We check for cancellation every 1ms
|
|
// (slightly longer because WriteController minimum delay is 1ms, in
|
|
// case of sleep imprecision, rounding, etc.)
|
|
const uint64_t kDelayInterval = 1001;
|
|
uint64_t stall_end = sw.start_time() + delay;
|
|
while (write_controller_.NeedsDelay()) {
|
|
if (immutable_db_options_.clock->NowMicros() >= stall_end) {
|
|
// We already delayed this write `delay` microseconds
|
|
break;
|
|
}
|
|
|
|
delayed = true;
|
|
// Sleep for 0.001 seconds
|
|
immutable_db_options_.clock->SleepForMicroseconds(kDelayInterval);
|
|
}
|
|
mutex_.Lock();
|
|
write_thread_.EndWriteStall();
|
|
}
|
|
|
|
// Don't wait if there's a background error, even if its a soft error. We
|
|
// might wait here indefinitely as the background compaction may never
|
|
// finish successfully, resulting in the stall condition lasting
|
|
// indefinitely
|
|
while (error_handler_.GetBGError().ok() && write_controller_.IsStopped()) {
|
|
if (write_options.no_slowdown) {
|
|
return Status::Incomplete("Write stall");
|
|
}
|
|
delayed = true;
|
|
|
|
// Notify write_thread_ about the stall so it can setup a barrier and
|
|
// fail any pending writers with no_slowdown
|
|
write_thread_.BeginWriteStall();
|
|
TEST_SYNC_POINT("DBImpl::DelayWrite:Wait");
|
|
bg_cv_.Wait();
|
|
write_thread_.EndWriteStall();
|
|
}
|
|
}
|
|
assert(!delayed || !write_options.no_slowdown);
|
|
if (delayed) {
|
|
default_cf_internal_stats_->AddDBStats(
|
|
InternalStats::kIntStatsWriteStallMicros, time_delayed);
|
|
RecordTick(stats_, STALL_MICROS, time_delayed);
|
|
}
|
|
|
|
// If DB is not in read-only mode and write_controller is not stopping
|
|
// writes, we can ignore any background errors and allow the write to
|
|
// proceed
|
|
Status s;
|
|
if (write_controller_.IsStopped()) {
|
|
// If writes are still stopped, it means we bailed due to a background
|
|
// error
|
|
s = Status::Incomplete(error_handler_.GetBGError().ToString());
|
|
}
|
|
if (error_handler_.IsDBStopped()) {
|
|
s = error_handler_.GetBGError();
|
|
}
|
|
return s;
|
|
}
|
|
|
|
// REQUIRES: mutex_ is held
|
|
// REQUIRES: this thread is currently at the front of the writer queue
|
|
void DBImpl::WriteBufferManagerStallWrites() {
|
|
mutex_.AssertHeld();
|
|
// First block future writer threads who want to add themselves to the queue
|
|
// of WriteThread.
|
|
write_thread_.BeginWriteStall();
|
|
mutex_.Unlock();
|
|
|
|
// Change the state to State::Blocked.
|
|
static_cast<WBMStallInterface*>(wbm_stall_.get())
|
|
->SetState(WBMStallInterface::State::BLOCKED);
|
|
// Then WriteBufferManager will add DB instance to its queue
|
|
// and block this thread by calling WBMStallInterface::Block().
|
|
write_buffer_manager_->BeginWriteStall(wbm_stall_.get());
|
|
wbm_stall_->Block();
|
|
|
|
mutex_.Lock();
|
|
// Stall has ended. Signal writer threads so that they can add
|
|
// themselves to the WriteThread queue for writes.
|
|
write_thread_.EndWriteStall();
|
|
}
|
|
|
|
Status DBImpl::ThrottleLowPriWritesIfNeeded(const WriteOptions& write_options,
|
|
WriteBatch* my_batch) {
|
|
assert(write_options.low_pri);
|
|
// This is called outside the DB mutex. Although it is safe to make the call,
|
|
// the consistency condition is not guaranteed to hold. It's OK to live with
|
|
// it in this case.
|
|
// If we need to speed compaction, it means the compaction is left behind
|
|
// and we start to limit low pri writes to a limit.
|
|
if (write_controller_.NeedSpeedupCompaction()) {
|
|
if (allow_2pc() && (my_batch->HasCommit() || my_batch->HasRollback())) {
|
|
// For 2PC, we only rate limit prepare, not commit.
|
|
return Status::OK();
|
|
}
|
|
if (write_options.no_slowdown) {
|
|
return Status::Incomplete("Low priority write stall");
|
|
} else {
|
|
assert(my_batch != nullptr);
|
|
// Rate limit those writes. The reason that we don't completely wait
|
|
// is that in case the write is heavy, low pri writes may never have
|
|
// a chance to run. Now we guarantee we are still slowly making
|
|
// progress.
|
|
PERF_TIMER_GUARD(write_delay_time);
|
|
write_controller_.low_pri_rate_limiter()->Request(
|
|
my_batch->GetDataSize(), Env::IO_HIGH, nullptr /* stats */,
|
|
RateLimiter::OpType::kWrite);
|
|
}
|
|
}
|
|
return Status::OK();
|
|
}
|
|
|
|
void DBImpl::MaybeFlushStatsCF(autovector<ColumnFamilyData*>* cfds) {
|
|
assert(cfds != nullptr);
|
|
if (!cfds->empty() && immutable_db_options_.persist_stats_to_disk) {
|
|
ColumnFamilyData* cfd_stats =
|
|
versions_->GetColumnFamilySet()->GetColumnFamily(
|
|
kPersistentStatsColumnFamilyName);
|
|
if (cfd_stats != nullptr && !cfd_stats->mem()->IsEmpty()) {
|
|
for (ColumnFamilyData* cfd : *cfds) {
|
|
if (cfd == cfd_stats) {
|
|
// stats CF already included in cfds
|
|
return;
|
|
}
|
|
}
|
|
// force flush stats CF when its log number is less than all other CF's
|
|
// log numbers
|
|
bool force_flush_stats_cf = true;
|
|
for (auto* loop_cfd : *versions_->GetColumnFamilySet()) {
|
|
if (loop_cfd == cfd_stats) {
|
|
continue;
|
|
}
|
|
if (loop_cfd->GetLogNumber() <= cfd_stats->GetLogNumber()) {
|
|
force_flush_stats_cf = false;
|
|
}
|
|
}
|
|
if (force_flush_stats_cf) {
|
|
cfds->push_back(cfd_stats);
|
|
ROCKS_LOG_INFO(immutable_db_options_.info_log,
|
|
"Force flushing stats CF with automated flush "
|
|
"to avoid holding old logs");
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
Status DBImpl::TrimMemtableHistory(WriteContext* context) {
|
|
autovector<ColumnFamilyData*> cfds;
|
|
ColumnFamilyData* tmp_cfd;
|
|
while ((tmp_cfd = trim_history_scheduler_.TakeNextColumnFamily()) !=
|
|
nullptr) {
|
|
cfds.push_back(tmp_cfd);
|
|
}
|
|
for (auto& cfd : cfds) {
|
|
autovector<MemTable*> to_delete;
|
|
bool trimmed = cfd->imm()->TrimHistory(&context->memtables_to_free_,
|
|
cfd->mem()->MemoryAllocatedBytes());
|
|
if (trimmed) {
|
|
context->superversion_context.NewSuperVersion();
|
|
assert(context->superversion_context.new_superversion.get() != nullptr);
|
|
cfd->InstallSuperVersion(&context->superversion_context, &mutex_);
|
|
}
|
|
|
|
if (cfd->UnrefAndTryDelete()) {
|
|
cfd = nullptr;
|
|
}
|
|
}
|
|
return Status::OK();
|
|
}
|
|
|
|
Status DBImpl::ScheduleFlushes(WriteContext* context) {
|
|
autovector<ColumnFamilyData*> cfds;
|
|
if (immutable_db_options_.atomic_flush) {
|
|
SelectColumnFamiliesForAtomicFlush(&cfds);
|
|
for (auto cfd : cfds) {
|
|
cfd->Ref();
|
|
}
|
|
flush_scheduler_.Clear();
|
|
} else {
|
|
ColumnFamilyData* tmp_cfd;
|
|
while ((tmp_cfd = flush_scheduler_.TakeNextColumnFamily()) != nullptr) {
|
|
cfds.push_back(tmp_cfd);
|
|
}
|
|
MaybeFlushStatsCF(&cfds);
|
|
}
|
|
Status status;
|
|
WriteThread::Writer nonmem_w;
|
|
if (two_write_queues_) {
|
|
nonmem_write_thread_.EnterUnbatched(&nonmem_w, &mutex_);
|
|
}
|
|
|
|
for (auto& cfd : cfds) {
|
|
if (!cfd->mem()->IsEmpty()) {
|
|
status = SwitchMemtable(cfd, context);
|
|
}
|
|
if (cfd->UnrefAndTryDelete()) {
|
|
cfd = nullptr;
|
|
}
|
|
if (!status.ok()) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (two_write_queues_) {
|
|
nonmem_write_thread_.ExitUnbatched(&nonmem_w);
|
|
}
|
|
|
|
if (status.ok()) {
|
|
if (immutable_db_options_.atomic_flush) {
|
|
AssignAtomicFlushSeq(cfds);
|
|
FlushRequest flush_req;
|
|
GenerateFlushRequest(cfds, &flush_req);
|
|
SchedulePendingFlush(flush_req, FlushReason::kWriteBufferFull);
|
|
} else {
|
|
for (auto* cfd : cfds) {
|
|
FlushRequest flush_req;
|
|
GenerateFlushRequest({cfd}, &flush_req);
|
|
SchedulePendingFlush(flush_req, FlushReason::kWriteBufferFull);
|
|
}
|
|
}
|
|
MaybeScheduleFlushOrCompaction();
|
|
}
|
|
return status;
|
|
}
|
|
|
|
#ifndef ROCKSDB_LITE
|
|
void DBImpl::NotifyOnMemTableSealed(ColumnFamilyData* /*cfd*/,
|
|
const MemTableInfo& mem_table_info) {
|
|
if (immutable_db_options_.listeners.size() == 0U) {
|
|
return;
|
|
}
|
|
if (shutting_down_.load(std::memory_order_acquire)) {
|
|
return;
|
|
}
|
|
|
|
for (auto listener : immutable_db_options_.listeners) {
|
|
listener->OnMemTableSealed(mem_table_info);
|
|
}
|
|
}
|
|
#endif // ROCKSDB_LITE
|
|
|
|
// REQUIRES: mutex_ is held
|
|
// REQUIRES: this thread is currently at the front of the writer queue
|
|
// REQUIRES: this thread is currently at the front of the 2nd writer queue if
|
|
// two_write_queues_ is true (This is to simplify the reasoning.)
|
|
Status DBImpl::SwitchMemtable(ColumnFamilyData* cfd, WriteContext* context) {
|
|
mutex_.AssertHeld();
|
|
log::Writer* new_log = nullptr;
|
|
MemTable* new_mem = nullptr;
|
|
IOStatus io_s;
|
|
|
|
// Recoverable state is persisted in WAL. After memtable switch, WAL might
|
|
// be deleted, so we write the state to memtable to be persisted as well.
|
|
Status s = WriteRecoverableState();
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
|
|
// Attempt to switch to a new memtable and trigger flush of old.
|
|
// Do this without holding the dbmutex lock.
|
|
assert(versions_->prev_log_number() == 0);
|
|
if (two_write_queues_) {
|
|
log_write_mutex_.Lock();
|
|
}
|
|
bool creating_new_log = !log_empty_;
|
|
if (two_write_queues_) {
|
|
log_write_mutex_.Unlock();
|
|
}
|
|
uint64_t recycle_log_number = 0;
|
|
if (creating_new_log && immutable_db_options_.recycle_log_file_num &&
|
|
!log_recycle_files_.empty()) {
|
|
recycle_log_number = log_recycle_files_.front();
|
|
}
|
|
uint64_t new_log_number =
|
|
creating_new_log ? versions_->NewFileNumber() : logfile_number_;
|
|
const MutableCFOptions mutable_cf_options = *cfd->GetLatestMutableCFOptions();
|
|
|
|
// Set memtable_info for memtable sealed callback
|
|
#ifndef ROCKSDB_LITE
|
|
MemTableInfo memtable_info;
|
|
memtable_info.cf_name = cfd->GetName();
|
|
memtable_info.first_seqno = cfd->mem()->GetFirstSequenceNumber();
|
|
memtable_info.earliest_seqno = cfd->mem()->GetEarliestSequenceNumber();
|
|
memtable_info.num_entries = cfd->mem()->num_entries();
|
|
memtable_info.num_deletes = cfd->mem()->num_deletes();
|
|
#endif // ROCKSDB_LITE
|
|
// Log this later after lock release. It may be outdated, e.g., if background
|
|
// flush happens before logging, but that should be ok.
|
|
int num_imm_unflushed = cfd->imm()->NumNotFlushed();
|
|
const auto preallocate_block_size =
|
|
GetWalPreallocateBlockSize(mutable_cf_options.write_buffer_size);
|
|
mutex_.Unlock();
|
|
if (creating_new_log) {
|
|
// TODO: Write buffer size passed in should be max of all CF's instead
|
|
// of mutable_cf_options.write_buffer_size.
|
|
io_s = CreateWAL(new_log_number, recycle_log_number, preallocate_block_size,
|
|
&new_log);
|
|
if (s.ok()) {
|
|
s = io_s;
|
|
}
|
|
}
|
|
if (s.ok()) {
|
|
SequenceNumber seq = versions_->LastSequence();
|
|
new_mem = cfd->ConstructNewMemtable(mutable_cf_options, seq);
|
|
context->superversion_context.NewSuperVersion();
|
|
}
|
|
ROCKS_LOG_INFO(immutable_db_options_.info_log,
|
|
"[%s] New memtable created with log file: #%" PRIu64
|
|
". Immutable memtables: %d.\n",
|
|
cfd->GetName().c_str(), new_log_number, num_imm_unflushed);
|
|
mutex_.Lock();
|
|
if (recycle_log_number != 0) {
|
|
// Since renaming the file is done outside DB mutex, we need to ensure
|
|
// concurrent full purges don't delete the file while we're recycling it.
|
|
// To achieve that we hold the old log number in the recyclable list until
|
|
// after it has been renamed.
|
|
assert(log_recycle_files_.front() == recycle_log_number);
|
|
log_recycle_files_.pop_front();
|
|
}
|
|
if (s.ok() && creating_new_log) {
|
|
log_write_mutex_.Lock();
|
|
assert(new_log != nullptr);
|
|
if (!logs_.empty()) {
|
|
// Alway flush the buffer of the last log before switching to a new one
|
|
log::Writer* cur_log_writer = logs_.back().writer;
|
|
io_s = cur_log_writer->WriteBuffer();
|
|
if (s.ok()) {
|
|
s = io_s;
|
|
}
|
|
if (!s.ok()) {
|
|
ROCKS_LOG_WARN(immutable_db_options_.info_log,
|
|
"[%s] Failed to switch from #%" PRIu64 " to #%" PRIu64
|
|
" WAL file\n",
|
|
cfd->GetName().c_str(), cur_log_writer->get_log_number(),
|
|
new_log_number);
|
|
}
|
|
}
|
|
if (s.ok()) {
|
|
logfile_number_ = new_log_number;
|
|
log_empty_ = true;
|
|
log_dir_synced_ = false;
|
|
logs_.emplace_back(logfile_number_, new_log);
|
|
alive_log_files_.push_back(LogFileNumberSize(logfile_number_));
|
|
}
|
|
log_write_mutex_.Unlock();
|
|
}
|
|
|
|
if (!s.ok()) {
|
|
// how do we fail if we're not creating new log?
|
|
assert(creating_new_log);
|
|
delete new_mem;
|
|
delete new_log;
|
|
context->superversion_context.new_superversion.reset();
|
|
// We may have lost data from the WritableFileBuffer in-memory buffer for
|
|
// the current log, so treat it as a fatal error and set bg_error
|
|
if (!io_s.ok()) {
|
|
error_handler_.SetBGError(io_s, BackgroundErrorReason::kMemTable);
|
|
} else {
|
|
error_handler_.SetBGError(s, BackgroundErrorReason::kMemTable);
|
|
}
|
|
// Read back bg_error in order to get the right severity
|
|
s = error_handler_.GetBGError();
|
|
return s;
|
|
}
|
|
|
|
bool empty_cf_updated = false;
|
|
if (immutable_db_options_.track_and_verify_wals_in_manifest &&
|
|
!immutable_db_options_.allow_2pc && creating_new_log) {
|
|
// In non-2pc mode, WALs become obsolete if they do not contain unflushed
|
|
// data. Updating the empty CF's log number might cause some WALs to become
|
|
// obsolete. So we should track the WAL obsoletion event before actually
|
|
// updating the empty CF's log number.
|
|
uint64_t min_wal_number_to_keep =
|
|
versions_->PreComputeMinLogNumberWithUnflushedData(logfile_number_);
|
|
if (min_wal_number_to_keep >
|
|
versions_->GetWalSet().GetMinWalNumberToKeep()) {
|
|
// Get a snapshot of the empty column families.
|
|
// LogAndApply may release and reacquire db
|
|
// mutex, during that period, column family may become empty (e.g. its
|
|
// flush succeeds), then it affects the computed min_log_number_to_keep,
|
|
// so we take a snapshot for consistency of column family data
|
|
// status. If a column family becomes non-empty afterwards, its active log
|
|
// should still be the created new log, so the min_log_number_to_keep is
|
|
// not affected.
|
|
autovector<ColumnFamilyData*> empty_cfs;
|
|
for (auto cf : *versions_->GetColumnFamilySet()) {
|
|
if (cf->IsEmpty()) {
|
|
empty_cfs.push_back(cf);
|
|
}
|
|
}
|
|
|
|
VersionEdit wal_deletion;
|
|
wal_deletion.DeleteWalsBefore(min_wal_number_to_keep);
|
|
s = versions_->LogAndApplyToDefaultColumnFamily(&wal_deletion, &mutex_);
|
|
if (!s.ok() && versions_->io_status().IsIOError()) {
|
|
s = error_handler_.SetBGError(versions_->io_status(),
|
|
BackgroundErrorReason::kManifestWrite);
|
|
}
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
|
|
for (auto cf : empty_cfs) {
|
|
if (cf->IsEmpty()) {
|
|
cf->SetLogNumber(logfile_number_);
|
|
// MEMPURGE: No need to change this, because new adds
|
|
// should still receive new sequence numbers.
|
|
cf->mem()->SetCreationSeq(versions_->LastSequence());
|
|
} // cf may become non-empty.
|
|
}
|
|
empty_cf_updated = true;
|
|
}
|
|
}
|
|
if (!empty_cf_updated) {
|
|
for (auto cf : *versions_->GetColumnFamilySet()) {
|
|
// all this is just optimization to delete logs that
|
|
// are no longer needed -- if CF is empty, that means it
|
|
// doesn't need that particular log to stay alive, so we just
|
|
// advance the log number. no need to persist this in the manifest
|
|
if (cf->IsEmpty()) {
|
|
if (creating_new_log) {
|
|
cf->SetLogNumber(logfile_number_);
|
|
}
|
|
cf->mem()->SetCreationSeq(versions_->LastSequence());
|
|
}
|
|
}
|
|
}
|
|
|
|
cfd->mem()->SetNextLogNumber(logfile_number_);
|
|
assert(new_mem != nullptr);
|
|
cfd->imm()->Add(cfd->mem(), &context->memtables_to_free_);
|
|
new_mem->Ref();
|
|
cfd->SetMemtable(new_mem);
|
|
InstallSuperVersionAndScheduleWork(cfd, &context->superversion_context,
|
|
mutable_cf_options);
|
|
|
|
#ifndef ROCKSDB_LITE
|
|
mutex_.Unlock();
|
|
// Notify client that memtable is sealed, now that we have successfully
|
|
// installed a new memtable
|
|
NotifyOnMemTableSealed(cfd, memtable_info);
|
|
mutex_.Lock();
|
|
#endif // ROCKSDB_LITE
|
|
// It is possible that we got here without checking the value of i_os, but
|
|
// that is okay. If we did, it most likely means that s was already an error.
|
|
// In any case, ignore any unchecked error for i_os here.
|
|
io_s.PermitUncheckedError();
|
|
return s;
|
|
}
|
|
|
|
size_t DBImpl::GetWalPreallocateBlockSize(uint64_t write_buffer_size) const {
|
|
mutex_.AssertHeld();
|
|
size_t bsize =
|
|
static_cast<size_t>(write_buffer_size / 10 + write_buffer_size);
|
|
// Some users might set very high write_buffer_size and rely on
|
|
// max_total_wal_size or other parameters to control the WAL size.
|
|
if (mutable_db_options_.max_total_wal_size > 0) {
|
|
bsize = std::min<size_t>(
|
|
bsize, static_cast<size_t>(mutable_db_options_.max_total_wal_size));
|
|
}
|
|
if (immutable_db_options_.db_write_buffer_size > 0) {
|
|
bsize = std::min<size_t>(bsize, immutable_db_options_.db_write_buffer_size);
|
|
}
|
|
if (immutable_db_options_.write_buffer_manager &&
|
|
immutable_db_options_.write_buffer_manager->enabled()) {
|
|
bsize = std::min<size_t>(
|
|
bsize, immutable_db_options_.write_buffer_manager->buffer_size());
|
|
}
|
|
|
|
return bsize;
|
|
}
|
|
|
|
// Default implementations of convenience methods that subclasses of DB
|
|
// can call if they wish
|
|
Status DB::Put(const WriteOptions& opt, ColumnFamilyHandle* column_family,
|
|
const Slice& key, const Slice& value) {
|
|
// Pre-allocate size of write batch conservatively.
|
|
// 8 bytes are taken by header, 4 bytes for count, 1 byte for type,
|
|
// and we allocate 11 extra bytes for key length, as well as value length.
|
|
WriteBatch batch(key.size() + value.size() + 24);
|
|
Status s = batch.Put(column_family, key, value);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
return Write(opt, &batch);
|
|
}
|
|
|
|
Status DB::Put(const WriteOptions& opt, ColumnFamilyHandle* column_family,
|
|
const Slice& key, const Slice& ts, const Slice& value) {
|
|
ColumnFamilyHandle* default_cf = DefaultColumnFamily();
|
|
assert(default_cf);
|
|
const Comparator* const default_cf_ucmp = default_cf->GetComparator();
|
|
assert(default_cf_ucmp);
|
|
WriteBatch batch(0, 0, 0, default_cf_ucmp->timestamp_size());
|
|
Status s = batch.Put(column_family, key, ts, value);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
return Write(opt, &batch);
|
|
}
|
|
|
|
Status DB::Delete(const WriteOptions& opt, ColumnFamilyHandle* column_family,
|
|
const Slice& key) {
|
|
WriteBatch batch;
|
|
Status s = batch.Delete(column_family, key);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
return Write(opt, &batch);
|
|
}
|
|
|
|
Status DB::Delete(const WriteOptions& opt, ColumnFamilyHandle* column_family,
|
|
const Slice& key, const Slice& ts) {
|
|
ColumnFamilyHandle* default_cf = DefaultColumnFamily();
|
|
assert(default_cf);
|
|
const Comparator* const default_cf_ucmp = default_cf->GetComparator();
|
|
assert(default_cf_ucmp);
|
|
WriteBatch batch(0, 0, 0, default_cf_ucmp->timestamp_size());
|
|
Status s = batch.Delete(column_family, key, ts);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
return Write(opt, &batch);
|
|
}
|
|
|
|
Status DB::SingleDelete(const WriteOptions& opt,
|
|
ColumnFamilyHandle* column_family, const Slice& key) {
|
|
WriteBatch batch;
|
|
Status s = batch.SingleDelete(column_family, key);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
return Write(opt, &batch);
|
|
}
|
|
|
|
Status DB::SingleDelete(const WriteOptions& opt,
|
|
ColumnFamilyHandle* column_family, const Slice& key,
|
|
const Slice& ts) {
|
|
ColumnFamilyHandle* default_cf = DefaultColumnFamily();
|
|
assert(default_cf);
|
|
const Comparator* const default_cf_ucmp = default_cf->GetComparator();
|
|
assert(default_cf_ucmp);
|
|
WriteBatch batch(0, 0, 0, default_cf_ucmp->timestamp_size());
|
|
Status s = batch.SingleDelete(column_family, key, ts);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
return Write(opt, &batch);
|
|
}
|
|
|
|
Status DB::DeleteRange(const WriteOptions& opt,
|
|
ColumnFamilyHandle* column_family,
|
|
const Slice& begin_key, const Slice& end_key) {
|
|
WriteBatch batch;
|
|
Status s = batch.DeleteRange(column_family, begin_key, end_key);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
return Write(opt, &batch);
|
|
}
|
|
|
|
Status DB::Merge(const WriteOptions& opt, ColumnFamilyHandle* column_family,
|
|
const Slice& key, const Slice& value) {
|
|
WriteBatch batch;
|
|
Status s = batch.Merge(column_family, key, value);
|
|
if (!s.ok()) {
|
|
return s;
|
|
}
|
|
return Write(opt, &batch);
|
|
}
|
|
} // namespace ROCKSDB_NAMESPACE
|