b4d7209428
Summary: The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes. Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it. So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks. Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files. This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR. Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289 Differential Revision: D15256423 Pulled By: al13n321 fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2907 lines
87 KiB
C++
2907 lines
87 KiB
C++
// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
|
|
// This source code is licensed under both the GPLv2 (found in the
|
|
// COPYING file in the root directory) and Apache 2.0 License
|
|
// (found in the LICENSE.Apache file in the root directory).
|
|
//
|
|
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
|
|
// Use of this source code is governed by a BSD-style license that can be
|
|
// found in the LICENSE file. See the AUTHORS file for names of contributors.
|
|
|
|
#include <functional>
|
|
|
|
#include "db/db_iter.h"
|
|
#include "db/db_test_util.h"
|
|
#include "port/port.h"
|
|
#include "port/stack_trace.h"
|
|
#include "rocksdb/iostats_context.h"
|
|
#include "rocksdb/perf_context.h"
|
|
#include "table/block_based/flush_block_policy.h"
|
|
|
|
namespace rocksdb {
|
|
|
|
// A dumb ReadCallback which saying every key is committed.
|
|
class DummyReadCallback : public ReadCallback {
|
|
public:
|
|
DummyReadCallback() : ReadCallback(kMaxSequenceNumber) {}
|
|
bool IsVisibleFullCheck(SequenceNumber /*seq*/) override { return true; }
|
|
void SetSnapshot(SequenceNumber seq) { max_visible_seq_ = seq; }
|
|
};
|
|
|
|
// Test param:
|
|
// bool: whether to pass read_callback to NewIterator().
|
|
class DBIteratorTest : public DBTestBase,
|
|
public testing::WithParamInterface<bool> {
|
|
public:
|
|
DBIteratorTest() : DBTestBase("/db_iterator_test") {}
|
|
|
|
Iterator* NewIterator(const ReadOptions& read_options,
|
|
ColumnFamilyHandle* column_family = nullptr) {
|
|
if (column_family == nullptr) {
|
|
column_family = db_->DefaultColumnFamily();
|
|
}
|
|
auto* cfd = reinterpret_cast<ColumnFamilyHandleImpl*>(column_family)->cfd();
|
|
SequenceNumber seq = read_options.snapshot != nullptr
|
|
? read_options.snapshot->GetSequenceNumber()
|
|
: db_->GetLatestSequenceNumber();
|
|
bool use_read_callback = GetParam();
|
|
DummyReadCallback* read_callback = nullptr;
|
|
if (use_read_callback) {
|
|
read_callback = new DummyReadCallback();
|
|
read_callback->SetSnapshot(seq);
|
|
InstrumentedMutexLock lock(&mutex_);
|
|
read_callbacks_.push_back(
|
|
std::unique_ptr<DummyReadCallback>(read_callback));
|
|
}
|
|
return dbfull()->NewIteratorImpl(read_options, cfd, seq, read_callback);
|
|
}
|
|
|
|
private:
|
|
InstrumentedMutex mutex_;
|
|
std::vector<std::unique_ptr<DummyReadCallback>> read_callbacks_;
|
|
};
|
|
|
|
TEST_P(DBIteratorTest, IteratorProperty) {
|
|
// The test needs to be changed if kPersistedTier is supported in iterator.
|
|
Options options = CurrentOptions();
|
|
CreateAndReopenWithCF({"pikachu"}, options);
|
|
Put(1, "1", "2");
|
|
Delete(1, "2");
|
|
ReadOptions ropt;
|
|
ropt.pin_data = false;
|
|
{
|
|
std::unique_ptr<Iterator> iter(NewIterator(ropt, handles_[1]));
|
|
iter->SeekToFirst();
|
|
std::string prop_value;
|
|
ASSERT_NOK(iter->GetProperty("non_existing.value", &prop_value));
|
|
ASSERT_OK(iter->GetProperty("rocksdb.iterator.is-key-pinned", &prop_value));
|
|
ASSERT_EQ("0", prop_value);
|
|
ASSERT_OK(iter->GetProperty("rocksdb.iterator.internal-key", &prop_value));
|
|
ASSERT_EQ("1", prop_value);
|
|
iter->Next();
|
|
ASSERT_OK(iter->GetProperty("rocksdb.iterator.is-key-pinned", &prop_value));
|
|
ASSERT_EQ("Iterator is not valid.", prop_value);
|
|
|
|
// Get internal key at which the iteration stopped (tombstone in this case).
|
|
ASSERT_OK(iter->GetProperty("rocksdb.iterator.internal-key", &prop_value));
|
|
ASSERT_EQ("2", prop_value);
|
|
}
|
|
Close();
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, PersistedTierOnIterator) {
|
|
// The test needs to be changed if kPersistedTier is supported in iterator.
|
|
Options options = CurrentOptions();
|
|
CreateAndReopenWithCF({"pikachu"}, options);
|
|
ReadOptions ropt;
|
|
ropt.read_tier = kPersistedTier;
|
|
|
|
auto* iter = db_->NewIterator(ropt, handles_[1]);
|
|
ASSERT_TRUE(iter->status().IsNotSupported());
|
|
delete iter;
|
|
|
|
std::vector<Iterator*> iters;
|
|
ASSERT_TRUE(db_->NewIterators(ropt, {handles_[1]}, &iters).IsNotSupported());
|
|
Close();
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, NonBlockingIteration) {
|
|
do {
|
|
ReadOptions non_blocking_opts, regular_opts;
|
|
Options options = CurrentOptions();
|
|
options.statistics = rocksdb::CreateDBStatistics();
|
|
non_blocking_opts.read_tier = kBlockCacheTier;
|
|
CreateAndReopenWithCF({"pikachu"}, options);
|
|
// write one kv to the database.
|
|
ASSERT_OK(Put(1, "a", "b"));
|
|
|
|
// scan using non-blocking iterator. We should find it because
|
|
// it is in memtable.
|
|
Iterator* iter = NewIterator(non_blocking_opts, handles_[1]);
|
|
int count = 0;
|
|
for (iter->SeekToFirst(); iter->Valid(); iter->Next()) {
|
|
ASSERT_OK(iter->status());
|
|
count++;
|
|
}
|
|
ASSERT_EQ(count, 1);
|
|
delete iter;
|
|
|
|
// flush memtable to storage. Now, the key should not be in the
|
|
// memtable neither in the block cache.
|
|
ASSERT_OK(Flush(1));
|
|
|
|
// verify that a non-blocking iterator does not find any
|
|
// kvs. Neither does it do any IOs to storage.
|
|
uint64_t numopen = TestGetTickerCount(options, NO_FILE_OPENS);
|
|
uint64_t cache_added = TestGetTickerCount(options, BLOCK_CACHE_ADD);
|
|
iter = NewIterator(non_blocking_opts, handles_[1]);
|
|
count = 0;
|
|
for (iter->SeekToFirst(); iter->Valid(); iter->Next()) {
|
|
count++;
|
|
}
|
|
ASSERT_EQ(count, 0);
|
|
ASSERT_TRUE(iter->status().IsIncomplete());
|
|
ASSERT_EQ(numopen, TestGetTickerCount(options, NO_FILE_OPENS));
|
|
ASSERT_EQ(cache_added, TestGetTickerCount(options, BLOCK_CACHE_ADD));
|
|
delete iter;
|
|
|
|
// read in the specified block via a regular get
|
|
ASSERT_EQ(Get(1, "a"), "b");
|
|
|
|
// verify that we can find it via a non-blocking scan
|
|
numopen = TestGetTickerCount(options, NO_FILE_OPENS);
|
|
cache_added = TestGetTickerCount(options, BLOCK_CACHE_ADD);
|
|
iter = NewIterator(non_blocking_opts, handles_[1]);
|
|
count = 0;
|
|
for (iter->SeekToFirst(); iter->Valid(); iter->Next()) {
|
|
ASSERT_OK(iter->status());
|
|
count++;
|
|
}
|
|
ASSERT_EQ(count, 1);
|
|
ASSERT_EQ(numopen, TestGetTickerCount(options, NO_FILE_OPENS));
|
|
ASSERT_EQ(cache_added, TestGetTickerCount(options, BLOCK_CACHE_ADD));
|
|
delete iter;
|
|
|
|
// This test verifies block cache behaviors, which is not used by plain
|
|
// table format.
|
|
} while (ChangeOptions(kSkipPlainTable | kSkipNoSeekToLast | kSkipMmapReads));
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, IterSeekBeforePrev) {
|
|
ASSERT_OK(Put("a", "b"));
|
|
ASSERT_OK(Put("c", "d"));
|
|
dbfull()->Flush(FlushOptions());
|
|
ASSERT_OK(Put("0", "f"));
|
|
ASSERT_OK(Put("1", "h"));
|
|
dbfull()->Flush(FlushOptions());
|
|
ASSERT_OK(Put("2", "j"));
|
|
auto iter = NewIterator(ReadOptions());
|
|
iter->Seek(Slice("c"));
|
|
iter->Prev();
|
|
iter->Seek(Slice("a"));
|
|
iter->Prev();
|
|
delete iter;
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, IterSeekForPrevBeforeNext) {
|
|
ASSERT_OK(Put("a", "b"));
|
|
ASSERT_OK(Put("c", "d"));
|
|
dbfull()->Flush(FlushOptions());
|
|
ASSERT_OK(Put("0", "f"));
|
|
ASSERT_OK(Put("1", "h"));
|
|
dbfull()->Flush(FlushOptions());
|
|
ASSERT_OK(Put("2", "j"));
|
|
auto iter = NewIterator(ReadOptions());
|
|
iter->SeekForPrev(Slice("0"));
|
|
iter->Next();
|
|
iter->SeekForPrev(Slice("1"));
|
|
iter->Next();
|
|
delete iter;
|
|
}
|
|
|
|
namespace {
|
|
std::string MakeLongKey(size_t length, char c) {
|
|
return std::string(length, c);
|
|
}
|
|
} // namespace
|
|
|
|
TEST_P(DBIteratorTest, IterLongKeys) {
|
|
ASSERT_OK(Put(MakeLongKey(20, 0), "0"));
|
|
ASSERT_OK(Put(MakeLongKey(32, 2), "2"));
|
|
ASSERT_OK(Put("a", "b"));
|
|
dbfull()->Flush(FlushOptions());
|
|
ASSERT_OK(Put(MakeLongKey(50, 1), "1"));
|
|
ASSERT_OK(Put(MakeLongKey(127, 3), "3"));
|
|
ASSERT_OK(Put(MakeLongKey(64, 4), "4"));
|
|
auto iter = NewIterator(ReadOptions());
|
|
|
|
// Create a key that needs to be skipped for Seq too new
|
|
iter->Seek(MakeLongKey(20, 0));
|
|
ASSERT_EQ(IterStatus(iter), MakeLongKey(20, 0) + "->0");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), MakeLongKey(50, 1) + "->1");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), MakeLongKey(32, 2) + "->2");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), MakeLongKey(127, 3) + "->3");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), MakeLongKey(64, 4) + "->4");
|
|
|
|
iter->SeekForPrev(MakeLongKey(127, 3));
|
|
ASSERT_EQ(IterStatus(iter), MakeLongKey(127, 3) + "->3");
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), MakeLongKey(32, 2) + "->2");
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), MakeLongKey(50, 1) + "->1");
|
|
delete iter;
|
|
|
|
iter = NewIterator(ReadOptions());
|
|
iter->Seek(MakeLongKey(50, 1));
|
|
ASSERT_EQ(IterStatus(iter), MakeLongKey(50, 1) + "->1");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), MakeLongKey(32, 2) + "->2");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), MakeLongKey(127, 3) + "->3");
|
|
delete iter;
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, IterNextWithNewerSeq) {
|
|
ASSERT_OK(Put("0", "0"));
|
|
dbfull()->Flush(FlushOptions());
|
|
ASSERT_OK(Put("a", "b"));
|
|
ASSERT_OK(Put("c", "d"));
|
|
ASSERT_OK(Put("d", "e"));
|
|
auto iter = NewIterator(ReadOptions());
|
|
|
|
// Create a key that needs to be skipped for Seq too new
|
|
for (uint64_t i = 0; i < last_options_.max_sequential_skip_in_iterations + 1;
|
|
i++) {
|
|
ASSERT_OK(Put("b", "f"));
|
|
}
|
|
|
|
iter->Seek(Slice("a"));
|
|
ASSERT_EQ(IterStatus(iter), "a->b");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "c->d");
|
|
iter->SeekForPrev(Slice("b"));
|
|
ASSERT_EQ(IterStatus(iter), "a->b");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "c->d");
|
|
|
|
delete iter;
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, IterPrevWithNewerSeq) {
|
|
ASSERT_OK(Put("0", "0"));
|
|
dbfull()->Flush(FlushOptions());
|
|
ASSERT_OK(Put("a", "b"));
|
|
ASSERT_OK(Put("c", "d"));
|
|
ASSERT_OK(Put("d", "e"));
|
|
auto iter = NewIterator(ReadOptions());
|
|
|
|
// Create a key that needs to be skipped for Seq too new
|
|
for (uint64_t i = 0; i < last_options_.max_sequential_skip_in_iterations + 1;
|
|
i++) {
|
|
ASSERT_OK(Put("b", "f"));
|
|
}
|
|
|
|
iter->Seek(Slice("d"));
|
|
ASSERT_EQ(IterStatus(iter), "d->e");
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "c->d");
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "a->b");
|
|
iter->Prev();
|
|
iter->SeekForPrev(Slice("d"));
|
|
ASSERT_EQ(IterStatus(iter), "d->e");
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "c->d");
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "a->b");
|
|
iter->Prev();
|
|
delete iter;
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, IterPrevWithNewerSeq2) {
|
|
ASSERT_OK(Put("0", "0"));
|
|
dbfull()->Flush(FlushOptions());
|
|
ASSERT_OK(Put("a", "b"));
|
|
ASSERT_OK(Put("c", "d"));
|
|
ASSERT_OK(Put("e", "f"));
|
|
auto iter = NewIterator(ReadOptions());
|
|
auto iter2 = NewIterator(ReadOptions());
|
|
iter->Seek(Slice("c"));
|
|
iter2->SeekForPrev(Slice("d"));
|
|
ASSERT_EQ(IterStatus(iter), "c->d");
|
|
ASSERT_EQ(IterStatus(iter2), "c->d");
|
|
|
|
// Create a key that needs to be skipped for Seq too new
|
|
for (uint64_t i = 0; i < last_options_.max_sequential_skip_in_iterations + 1;
|
|
i++) {
|
|
ASSERT_OK(Put("b", "f"));
|
|
}
|
|
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "a->b");
|
|
iter->Prev();
|
|
iter2->Prev();
|
|
ASSERT_EQ(IterStatus(iter2), "a->b");
|
|
iter2->Prev();
|
|
delete iter;
|
|
delete iter2;
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, IterEmpty) {
|
|
do {
|
|
CreateAndReopenWithCF({"pikachu"}, CurrentOptions());
|
|
Iterator* iter = NewIterator(ReadOptions(), handles_[1]);
|
|
|
|
iter->SeekToFirst();
|
|
ASSERT_EQ(IterStatus(iter), "(invalid)");
|
|
|
|
iter->SeekToLast();
|
|
ASSERT_EQ(IterStatus(iter), "(invalid)");
|
|
|
|
iter->Seek("foo");
|
|
ASSERT_EQ(IterStatus(iter), "(invalid)");
|
|
|
|
iter->SeekForPrev("foo");
|
|
ASSERT_EQ(IterStatus(iter), "(invalid)");
|
|
|
|
delete iter;
|
|
} while (ChangeCompactOptions());
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, IterSingle) {
|
|
do {
|
|
CreateAndReopenWithCF({"pikachu"}, CurrentOptions());
|
|
ASSERT_OK(Put(1, "a", "va"));
|
|
Iterator* iter = NewIterator(ReadOptions(), handles_[1]);
|
|
|
|
iter->SeekToFirst();
|
|
ASSERT_EQ(IterStatus(iter), "a->va");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "(invalid)");
|
|
iter->SeekToFirst();
|
|
ASSERT_EQ(IterStatus(iter), "a->va");
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "(invalid)");
|
|
|
|
iter->SeekToLast();
|
|
ASSERT_EQ(IterStatus(iter), "a->va");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "(invalid)");
|
|
iter->SeekToLast();
|
|
ASSERT_EQ(IterStatus(iter), "a->va");
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "(invalid)");
|
|
|
|
iter->Seek("");
|
|
ASSERT_EQ(IterStatus(iter), "a->va");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "(invalid)");
|
|
iter->SeekForPrev("");
|
|
ASSERT_EQ(IterStatus(iter), "(invalid)");
|
|
|
|
iter->Seek("a");
|
|
ASSERT_EQ(IterStatus(iter), "a->va");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "(invalid)");
|
|
iter->SeekForPrev("a");
|
|
ASSERT_EQ(IterStatus(iter), "a->va");
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "(invalid)");
|
|
|
|
iter->Seek("b");
|
|
ASSERT_EQ(IterStatus(iter), "(invalid)");
|
|
iter->SeekForPrev("b");
|
|
ASSERT_EQ(IterStatus(iter), "a->va");
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "(invalid)");
|
|
|
|
delete iter;
|
|
} while (ChangeCompactOptions());
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, IterMulti) {
|
|
do {
|
|
CreateAndReopenWithCF({"pikachu"}, CurrentOptions());
|
|
ASSERT_OK(Put(1, "a", "va"));
|
|
ASSERT_OK(Put(1, "b", "vb"));
|
|
ASSERT_OK(Put(1, "c", "vc"));
|
|
Iterator* iter = NewIterator(ReadOptions(), handles_[1]);
|
|
|
|
iter->SeekToFirst();
|
|
ASSERT_EQ(IterStatus(iter), "a->va");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "b->vb");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "c->vc");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "(invalid)");
|
|
iter->SeekToFirst();
|
|
ASSERT_EQ(IterStatus(iter), "a->va");
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "(invalid)");
|
|
|
|
iter->SeekToLast();
|
|
ASSERT_EQ(IterStatus(iter), "c->vc");
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "b->vb");
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "a->va");
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "(invalid)");
|
|
iter->SeekToLast();
|
|
ASSERT_EQ(IterStatus(iter), "c->vc");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "(invalid)");
|
|
|
|
iter->Seek("");
|
|
ASSERT_EQ(IterStatus(iter), "a->va");
|
|
iter->Seek("a");
|
|
ASSERT_EQ(IterStatus(iter), "a->va");
|
|
iter->Seek("ax");
|
|
ASSERT_EQ(IterStatus(iter), "b->vb");
|
|
iter->SeekForPrev("d");
|
|
ASSERT_EQ(IterStatus(iter), "c->vc");
|
|
iter->SeekForPrev("c");
|
|
ASSERT_EQ(IterStatus(iter), "c->vc");
|
|
iter->SeekForPrev("bx");
|
|
ASSERT_EQ(IterStatus(iter), "b->vb");
|
|
|
|
iter->Seek("b");
|
|
ASSERT_EQ(IterStatus(iter), "b->vb");
|
|
iter->Seek("z");
|
|
ASSERT_EQ(IterStatus(iter), "(invalid)");
|
|
iter->SeekForPrev("b");
|
|
ASSERT_EQ(IterStatus(iter), "b->vb");
|
|
iter->SeekForPrev("");
|
|
ASSERT_EQ(IterStatus(iter), "(invalid)");
|
|
|
|
// Switch from reverse to forward
|
|
iter->SeekToLast();
|
|
iter->Prev();
|
|
iter->Prev();
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "b->vb");
|
|
|
|
// Switch from forward to reverse
|
|
iter->SeekToFirst();
|
|
iter->Next();
|
|
iter->Next();
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "b->vb");
|
|
|
|
// Make sure iter stays at snapshot
|
|
ASSERT_OK(Put(1, "a", "va2"));
|
|
ASSERT_OK(Put(1, "a2", "va3"));
|
|
ASSERT_OK(Put(1, "b", "vb2"));
|
|
ASSERT_OK(Put(1, "c", "vc2"));
|
|
ASSERT_OK(Delete(1, "b"));
|
|
iter->SeekToFirst();
|
|
ASSERT_EQ(IterStatus(iter), "a->va");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "b->vb");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "c->vc");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "(invalid)");
|
|
iter->SeekToLast();
|
|
ASSERT_EQ(IterStatus(iter), "c->vc");
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "b->vb");
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "a->va");
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "(invalid)");
|
|
|
|
delete iter;
|
|
} while (ChangeCompactOptions());
|
|
}
|
|
|
|
// Check that we can skip over a run of user keys
|
|
// by using reseek rather than sequential scan
|
|
TEST_P(DBIteratorTest, IterReseek) {
|
|
anon::OptionsOverride options_override;
|
|
options_override.skip_policy = kSkipNoSnapshot;
|
|
Options options = CurrentOptions(options_override);
|
|
options.max_sequential_skip_in_iterations = 3;
|
|
options.create_if_missing = true;
|
|
options.statistics = rocksdb::CreateDBStatistics();
|
|
DestroyAndReopen(options);
|
|
CreateAndReopenWithCF({"pikachu"}, options);
|
|
|
|
// insert three keys with same userkey and verify that
|
|
// reseek is not invoked. For each of these test cases,
|
|
// verify that we can find the next key "b".
|
|
ASSERT_OK(Put(1, "a", "zero"));
|
|
ASSERT_OK(Put(1, "a", "one"));
|
|
ASSERT_OK(Put(1, "a", "two"));
|
|
ASSERT_OK(Put(1, "b", "bone"));
|
|
Iterator* iter = NewIterator(ReadOptions(), handles_[1]);
|
|
iter->SeekToFirst();
|
|
ASSERT_EQ(TestGetTickerCount(options, NUMBER_OF_RESEEKS_IN_ITERATION), 0);
|
|
ASSERT_EQ(IterStatus(iter), "a->two");
|
|
iter->Next();
|
|
ASSERT_EQ(TestGetTickerCount(options, NUMBER_OF_RESEEKS_IN_ITERATION), 0);
|
|
ASSERT_EQ(IterStatus(iter), "b->bone");
|
|
delete iter;
|
|
|
|
// insert a total of three keys with same userkey and verify
|
|
// that reseek is still not invoked.
|
|
ASSERT_OK(Put(1, "a", "three"));
|
|
iter = NewIterator(ReadOptions(), handles_[1]);
|
|
iter->SeekToFirst();
|
|
ASSERT_EQ(IterStatus(iter), "a->three");
|
|
iter->Next();
|
|
ASSERT_EQ(TestGetTickerCount(options, NUMBER_OF_RESEEKS_IN_ITERATION), 0);
|
|
ASSERT_EQ(IterStatus(iter), "b->bone");
|
|
delete iter;
|
|
|
|
// insert a total of four keys with same userkey and verify
|
|
// that reseek is invoked.
|
|
ASSERT_OK(Put(1, "a", "four"));
|
|
iter = NewIterator(ReadOptions(), handles_[1]);
|
|
iter->SeekToFirst();
|
|
ASSERT_EQ(IterStatus(iter), "a->four");
|
|
ASSERT_EQ(TestGetTickerCount(options, NUMBER_OF_RESEEKS_IN_ITERATION), 0);
|
|
iter->Next();
|
|
ASSERT_EQ(TestGetTickerCount(options, NUMBER_OF_RESEEKS_IN_ITERATION), 1);
|
|
ASSERT_EQ(IterStatus(iter), "b->bone");
|
|
delete iter;
|
|
|
|
// Testing reverse iterator
|
|
// At this point, we have three versions of "a" and one version of "b".
|
|
// The reseek statistics is already at 1.
|
|
int num_reseeks = static_cast<int>(
|
|
TestGetTickerCount(options, NUMBER_OF_RESEEKS_IN_ITERATION));
|
|
|
|
// Insert another version of b and assert that reseek is not invoked
|
|
ASSERT_OK(Put(1, "b", "btwo"));
|
|
iter = NewIterator(ReadOptions(), handles_[1]);
|
|
iter->SeekToLast();
|
|
ASSERT_EQ(IterStatus(iter), "b->btwo");
|
|
ASSERT_EQ(TestGetTickerCount(options, NUMBER_OF_RESEEKS_IN_ITERATION),
|
|
num_reseeks);
|
|
iter->Prev();
|
|
ASSERT_EQ(TestGetTickerCount(options, NUMBER_OF_RESEEKS_IN_ITERATION),
|
|
num_reseeks + 1);
|
|
ASSERT_EQ(IterStatus(iter), "a->four");
|
|
delete iter;
|
|
|
|
// insert two more versions of b. This makes a total of 4 versions
|
|
// of b and 4 versions of a.
|
|
ASSERT_OK(Put(1, "b", "bthree"));
|
|
ASSERT_OK(Put(1, "b", "bfour"));
|
|
iter = NewIterator(ReadOptions(), handles_[1]);
|
|
iter->SeekToLast();
|
|
ASSERT_EQ(IterStatus(iter), "b->bfour");
|
|
ASSERT_EQ(TestGetTickerCount(options, NUMBER_OF_RESEEKS_IN_ITERATION),
|
|
num_reseeks + 2);
|
|
iter->Prev();
|
|
|
|
// the previous Prev call should have invoked reseek
|
|
ASSERT_EQ(TestGetTickerCount(options, NUMBER_OF_RESEEKS_IN_ITERATION),
|
|
num_reseeks + 3);
|
|
ASSERT_EQ(IterStatus(iter), "a->four");
|
|
delete iter;
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, IterSmallAndLargeMix) {
|
|
do {
|
|
CreateAndReopenWithCF({"pikachu"}, CurrentOptions());
|
|
ASSERT_OK(Put(1, "a", "va"));
|
|
ASSERT_OK(Put(1, "b", std::string(100000, 'b')));
|
|
ASSERT_OK(Put(1, "c", "vc"));
|
|
ASSERT_OK(Put(1, "d", std::string(100000, 'd')));
|
|
ASSERT_OK(Put(1, "e", std::string(100000, 'e')));
|
|
|
|
Iterator* iter = NewIterator(ReadOptions(), handles_[1]);
|
|
|
|
iter->SeekToFirst();
|
|
ASSERT_EQ(IterStatus(iter), "a->va");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "b->" + std::string(100000, 'b'));
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "c->vc");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "d->" + std::string(100000, 'd'));
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "e->" + std::string(100000, 'e'));
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "(invalid)");
|
|
|
|
iter->SeekToLast();
|
|
ASSERT_EQ(IterStatus(iter), "e->" + std::string(100000, 'e'));
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "d->" + std::string(100000, 'd'));
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "c->vc");
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "b->" + std::string(100000, 'b'));
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "a->va");
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "(invalid)");
|
|
|
|
delete iter;
|
|
} while (ChangeCompactOptions());
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, IterMultiWithDelete) {
|
|
do {
|
|
CreateAndReopenWithCF({"pikachu"}, CurrentOptions());
|
|
ASSERT_OK(Put(1, "ka", "va"));
|
|
ASSERT_OK(Put(1, "kb", "vb"));
|
|
ASSERT_OK(Put(1, "kc", "vc"));
|
|
ASSERT_OK(Delete(1, "kb"));
|
|
ASSERT_EQ("NOT_FOUND", Get(1, "kb"));
|
|
|
|
Iterator* iter = NewIterator(ReadOptions(), handles_[1]);
|
|
iter->Seek("kc");
|
|
ASSERT_EQ(IterStatus(iter), "kc->vc");
|
|
if (!CurrentOptions().merge_operator) {
|
|
// TODO: merge operator does not support backward iteration yet
|
|
if (kPlainTableAllBytesPrefix != option_config_ &&
|
|
kBlockBasedTableWithWholeKeyHashIndex != option_config_ &&
|
|
kHashLinkList != option_config_ &&
|
|
kHashSkipList != option_config_) { // doesn't support SeekToLast
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "ka->va");
|
|
}
|
|
}
|
|
delete iter;
|
|
} while (ChangeOptions());
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, IterPrevMaxSkip) {
|
|
do {
|
|
CreateAndReopenWithCF({"pikachu"}, CurrentOptions());
|
|
for (int i = 0; i < 2; i++) {
|
|
ASSERT_OK(Put(1, "key1", "v1"));
|
|
ASSERT_OK(Put(1, "key2", "v2"));
|
|
ASSERT_OK(Put(1, "key3", "v3"));
|
|
ASSERT_OK(Put(1, "key4", "v4"));
|
|
ASSERT_OK(Put(1, "key5", "v5"));
|
|
}
|
|
|
|
VerifyIterLast("key5->v5", 1);
|
|
|
|
ASSERT_OK(Delete(1, "key5"));
|
|
VerifyIterLast("key4->v4", 1);
|
|
|
|
ASSERT_OK(Delete(1, "key4"));
|
|
VerifyIterLast("key3->v3", 1);
|
|
|
|
ASSERT_OK(Delete(1, "key3"));
|
|
VerifyIterLast("key2->v2", 1);
|
|
|
|
ASSERT_OK(Delete(1, "key2"));
|
|
VerifyIterLast("key1->v1", 1);
|
|
|
|
ASSERT_OK(Delete(1, "key1"));
|
|
VerifyIterLast("(invalid)", 1);
|
|
} while (ChangeOptions(kSkipMergePut | kSkipNoSeekToLast));
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, IterWithSnapshot) {
|
|
anon::OptionsOverride options_override;
|
|
options_override.skip_policy = kSkipNoSnapshot;
|
|
do {
|
|
CreateAndReopenWithCF({"pikachu"}, CurrentOptions(options_override));
|
|
ASSERT_OK(Put(1, "key1", "val1"));
|
|
ASSERT_OK(Put(1, "key2", "val2"));
|
|
ASSERT_OK(Put(1, "key3", "val3"));
|
|
ASSERT_OK(Put(1, "key4", "val4"));
|
|
ASSERT_OK(Put(1, "key5", "val5"));
|
|
|
|
const Snapshot* snapshot = db_->GetSnapshot();
|
|
ReadOptions options;
|
|
options.snapshot = snapshot;
|
|
Iterator* iter = NewIterator(options, handles_[1]);
|
|
|
|
ASSERT_OK(Put(1, "key0", "val0"));
|
|
// Put more values after the snapshot
|
|
ASSERT_OK(Put(1, "key100", "val100"));
|
|
ASSERT_OK(Put(1, "key101", "val101"));
|
|
|
|
iter->Seek("key5");
|
|
ASSERT_EQ(IterStatus(iter), "key5->val5");
|
|
if (!CurrentOptions().merge_operator) {
|
|
// TODO: merge operator does not support backward iteration yet
|
|
if (kPlainTableAllBytesPrefix != option_config_ &&
|
|
kBlockBasedTableWithWholeKeyHashIndex != option_config_ &&
|
|
kHashLinkList != option_config_ && kHashSkipList != option_config_) {
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "key4->val4");
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "key3->val3");
|
|
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "key4->val4");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "key5->val5");
|
|
}
|
|
iter->Next();
|
|
ASSERT_TRUE(!iter->Valid());
|
|
}
|
|
|
|
if (!CurrentOptions().merge_operator) {
|
|
// TODO(gzh): merge operator does not support backward iteration yet
|
|
if (kPlainTableAllBytesPrefix != option_config_ &&
|
|
kBlockBasedTableWithWholeKeyHashIndex != option_config_ &&
|
|
kHashLinkList != option_config_ && kHashSkipList != option_config_) {
|
|
iter->SeekForPrev("key1");
|
|
ASSERT_EQ(IterStatus(iter), "key1->val1");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "key2->val2");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "key3->val3");
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "key2->val2");
|
|
iter->Prev();
|
|
ASSERT_EQ(IterStatus(iter), "key1->val1");
|
|
iter->Prev();
|
|
ASSERT_TRUE(!iter->Valid());
|
|
}
|
|
}
|
|
db_->ReleaseSnapshot(snapshot);
|
|
delete iter;
|
|
} while (ChangeOptions());
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, IteratorPinsRef) {
|
|
do {
|
|
CreateAndReopenWithCF({"pikachu"}, CurrentOptions());
|
|
Put(1, "foo", "hello");
|
|
|
|
// Get iterator that will yield the current contents of the DB.
|
|
Iterator* iter = NewIterator(ReadOptions(), handles_[1]);
|
|
|
|
// Write to force compactions
|
|
Put(1, "foo", "newvalue1");
|
|
for (int i = 0; i < 100; i++) {
|
|
// 100K values
|
|
ASSERT_OK(Put(1, Key(i), Key(i) + std::string(100000, 'v')));
|
|
}
|
|
Put(1, "foo", "newvalue2");
|
|
|
|
iter->SeekToFirst();
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ("foo", iter->key().ToString());
|
|
ASSERT_EQ("hello", iter->value().ToString());
|
|
iter->Next();
|
|
ASSERT_TRUE(!iter->Valid());
|
|
delete iter;
|
|
} while (ChangeCompactOptions());
|
|
}
|
|
|
|
// SetOptions not defined in ROCKSDB LITE
|
|
#ifndef ROCKSDB_LITE
|
|
TEST_P(DBIteratorTest, DBIteratorBoundTest) {
|
|
Options options = CurrentOptions();
|
|
options.env = env_;
|
|
options.create_if_missing = true;
|
|
|
|
options.prefix_extractor = nullptr;
|
|
DestroyAndReopen(options);
|
|
ASSERT_OK(Put("a", "0"));
|
|
ASSERT_OK(Put("foo", "bar"));
|
|
ASSERT_OK(Put("foo1", "bar1"));
|
|
ASSERT_OK(Put("g1", "0"));
|
|
|
|
// testing basic case with no iterate_upper_bound and no prefix_extractor
|
|
{
|
|
ReadOptions ro;
|
|
ro.iterate_upper_bound = nullptr;
|
|
|
|
std::unique_ptr<Iterator> iter(NewIterator(ro));
|
|
|
|
iter->Seek("foo");
|
|
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("foo")), 0);
|
|
|
|
iter->Next();
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("foo1")), 0);
|
|
|
|
iter->Next();
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("g1")), 0);
|
|
|
|
iter->SeekForPrev("g1");
|
|
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("g1")), 0);
|
|
|
|
iter->Prev();
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("foo1")), 0);
|
|
|
|
iter->Prev();
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("foo")), 0);
|
|
}
|
|
|
|
// testing iterate_upper_bound and forward iterator
|
|
// to make sure it stops at bound
|
|
{
|
|
ReadOptions ro;
|
|
// iterate_upper_bound points beyond the last expected entry
|
|
Slice prefix("foo2");
|
|
ro.iterate_upper_bound = &prefix;
|
|
|
|
std::unique_ptr<Iterator> iter(NewIterator(ro));
|
|
|
|
iter->Seek("foo");
|
|
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("foo")), 0);
|
|
|
|
iter->Next();
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(("foo1")), 0);
|
|
|
|
iter->Next();
|
|
// should stop here...
|
|
ASSERT_TRUE(!iter->Valid());
|
|
}
|
|
// Testing SeekToLast with iterate_upper_bound set
|
|
{
|
|
ReadOptions ro;
|
|
|
|
Slice prefix("foo");
|
|
ro.iterate_upper_bound = &prefix;
|
|
|
|
std::unique_ptr<Iterator> iter(NewIterator(ro));
|
|
|
|
iter->SeekToLast();
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("a")), 0);
|
|
}
|
|
|
|
// prefix is the first letter of the key
|
|
ASSERT_OK(dbfull()->SetOptions({{"prefix_extractor", "fixed:1"}}));
|
|
ASSERT_OK(Put("a", "0"));
|
|
ASSERT_OK(Put("foo", "bar"));
|
|
ASSERT_OK(Put("foo1", "bar1"));
|
|
ASSERT_OK(Put("g1", "0"));
|
|
|
|
// testing with iterate_upper_bound and prefix_extractor
|
|
// Seek target and iterate_upper_bound are not is same prefix
|
|
// This should be an error
|
|
{
|
|
ReadOptions ro;
|
|
Slice upper_bound("g");
|
|
ro.iterate_upper_bound = &upper_bound;
|
|
|
|
std::unique_ptr<Iterator> iter(NewIterator(ro));
|
|
|
|
iter->Seek("foo");
|
|
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ("foo", iter->key().ToString());
|
|
|
|
iter->Next();
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ("foo1", iter->key().ToString());
|
|
|
|
iter->Next();
|
|
ASSERT_TRUE(!iter->Valid());
|
|
}
|
|
|
|
// testing that iterate_upper_bound prevents iterating over deleted items
|
|
// if the bound has already reached
|
|
{
|
|
options.prefix_extractor = nullptr;
|
|
DestroyAndReopen(options);
|
|
ASSERT_OK(Put("a", "0"));
|
|
ASSERT_OK(Put("b", "0"));
|
|
ASSERT_OK(Put("b1", "0"));
|
|
ASSERT_OK(Put("c", "0"));
|
|
ASSERT_OK(Put("d", "0"));
|
|
ASSERT_OK(Put("e", "0"));
|
|
ASSERT_OK(Delete("c"));
|
|
ASSERT_OK(Delete("d"));
|
|
|
|
// base case with no bound
|
|
ReadOptions ro;
|
|
ro.iterate_upper_bound = nullptr;
|
|
|
|
std::unique_ptr<Iterator> iter(NewIterator(ro));
|
|
|
|
iter->Seek("b");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("b")), 0);
|
|
|
|
iter->Next();
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(("b1")), 0);
|
|
|
|
get_perf_context()->Reset();
|
|
iter->Next();
|
|
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(static_cast<int>(get_perf_context()->internal_delete_skipped_count), 2);
|
|
|
|
// now testing with iterate_bound
|
|
Slice prefix("c");
|
|
ro.iterate_upper_bound = &prefix;
|
|
|
|
iter.reset(NewIterator(ro));
|
|
|
|
get_perf_context()->Reset();
|
|
|
|
iter->Seek("b");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("b")), 0);
|
|
|
|
iter->Next();
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(("b1")), 0);
|
|
|
|
iter->Next();
|
|
// the iteration should stop as soon as the bound key is reached
|
|
// even though the key is deleted
|
|
// hence internal_delete_skipped_count should be 0
|
|
ASSERT_TRUE(!iter->Valid());
|
|
ASSERT_EQ(static_cast<int>(get_perf_context()->internal_delete_skipped_count), 0);
|
|
}
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, DBIteratorBoundMultiSeek) {
|
|
Options options = CurrentOptions();
|
|
options.env = env_;
|
|
options.create_if_missing = true;
|
|
options.statistics = rocksdb::CreateDBStatistics();
|
|
options.prefix_extractor = nullptr;
|
|
DestroyAndReopen(options);
|
|
ASSERT_OK(Put("a", "0"));
|
|
ASSERT_OK(Put("z", "0"));
|
|
ASSERT_OK(Flush());
|
|
ASSERT_OK(Put("foo1", "bar1"));
|
|
ASSERT_OK(Put("foo2", "bar2"));
|
|
ASSERT_OK(Put("foo3", "bar3"));
|
|
ASSERT_OK(Put("foo4", "bar4"));
|
|
|
|
{
|
|
std::string up_str = "foo5";
|
|
Slice up(up_str);
|
|
ReadOptions ro;
|
|
ro.iterate_upper_bound = &up;
|
|
std::unique_ptr<Iterator> iter(NewIterator(ro));
|
|
|
|
iter->Seek("foo1");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("foo1")), 0);
|
|
|
|
uint64_t prev_block_cache_hit =
|
|
TestGetTickerCount(options, BLOCK_CACHE_HIT);
|
|
uint64_t prev_block_cache_miss =
|
|
TestGetTickerCount(options, BLOCK_CACHE_MISS);
|
|
|
|
ASSERT_GT(prev_block_cache_hit + prev_block_cache_miss, 0);
|
|
|
|
iter->Seek("foo4");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("foo4")), 0);
|
|
ASSERT_EQ(prev_block_cache_hit,
|
|
TestGetTickerCount(options, BLOCK_CACHE_HIT));
|
|
ASSERT_EQ(prev_block_cache_miss,
|
|
TestGetTickerCount(options, BLOCK_CACHE_MISS));
|
|
|
|
iter->Seek("foo2");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("foo2")), 0);
|
|
iter->Next();
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("foo3")), 0);
|
|
ASSERT_EQ(prev_block_cache_hit,
|
|
TestGetTickerCount(options, BLOCK_CACHE_HIT));
|
|
ASSERT_EQ(prev_block_cache_miss,
|
|
TestGetTickerCount(options, BLOCK_CACHE_MISS));
|
|
}
|
|
}
|
|
#endif
|
|
|
|
TEST_P(DBIteratorTest, DBIteratorBoundOptimizationTest) {
|
|
for (auto format_version : {2, 3, 4}) {
|
|
int upper_bound_hits = 0;
|
|
Options options = CurrentOptions();
|
|
rocksdb::SyncPoint::GetInstance()->SetCallBack(
|
|
"BlockBasedTableIterator:out_of_bound",
|
|
[&upper_bound_hits](void*) { upper_bound_hits++; });
|
|
rocksdb::SyncPoint::GetInstance()->EnableProcessing();
|
|
options.env = env_;
|
|
options.create_if_missing = true;
|
|
options.prefix_extractor = nullptr;
|
|
BlockBasedTableOptions table_options;
|
|
table_options.format_version = format_version;
|
|
table_options.flush_block_policy_factory =
|
|
std::make_shared<FlushBlockEveryKeyPolicyFactory>();
|
|
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
|
|
|
|
DestroyAndReopen(options);
|
|
ASSERT_OK(Put("foo1", "bar1"));
|
|
ASSERT_OK(Put("foo2", "bar2"));
|
|
ASSERT_OK(Put("foo4", "bar4"));
|
|
ASSERT_OK(Flush());
|
|
|
|
Slice ub("foo3");
|
|
ReadOptions ro;
|
|
ro.iterate_upper_bound = &ub;
|
|
|
|
std::unique_ptr<Iterator> iter(NewIterator(ro));
|
|
|
|
iter->Seek("foo");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("foo1")), 0);
|
|
ASSERT_EQ(upper_bound_hits, 0);
|
|
|
|
iter->Next();
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("foo2")), 0);
|
|
ASSERT_EQ(upper_bound_hits, 0);
|
|
|
|
iter->Next();
|
|
ASSERT_FALSE(iter->Valid());
|
|
ASSERT_EQ(upper_bound_hits, 1);
|
|
}
|
|
}
|
|
|
|
// Enable kBinarySearchWithFirstKey, do some iterator operations and check that
|
|
// they don't do unnecessary block reads.
|
|
TEST_P(DBIteratorTest, IndexWithFirstKey) {
|
|
for (int tailing = 0; tailing < 2; ++tailing) {
|
|
SCOPED_TRACE("tailing = " + std::to_string(tailing));
|
|
Options options = CurrentOptions();
|
|
options.env = env_;
|
|
options.create_if_missing = true;
|
|
options.prefix_extractor = nullptr;
|
|
options.merge_operator = MergeOperators::CreateStringAppendOperator();
|
|
options.statistics = rocksdb::CreateDBStatistics();
|
|
Statistics* stats = options.statistics.get();
|
|
BlockBasedTableOptions table_options;
|
|
table_options.index_type =
|
|
BlockBasedTableOptions::IndexType::kBinarySearchWithFirstKey;
|
|
table_options.index_shortening =
|
|
BlockBasedTableOptions::IndexShorteningMode::kNoShortening;
|
|
table_options.flush_block_policy_factory =
|
|
std::make_shared<FlushBlockEveryKeyPolicyFactory>();
|
|
table_options.block_cache = NewLRUCache(1000); // fits all blocks
|
|
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
|
|
|
|
DestroyAndReopen(options);
|
|
ASSERT_OK(Merge("a1", "x1"));
|
|
ASSERT_OK(Merge("b1", "y1"));
|
|
ASSERT_OK(Merge("c0", "z1"));
|
|
ASSERT_OK(Flush());
|
|
ASSERT_OK(Merge("a2", "x2"));
|
|
ASSERT_OK(Merge("b2", "y2"));
|
|
ASSERT_OK(Merge("c0", "z2"));
|
|
ASSERT_OK(Flush());
|
|
ASSERT_OK(Merge("a3", "x3"));
|
|
ASSERT_OK(Merge("b3", "y3"));
|
|
ASSERT_OK(Merge("c3", "z3"));
|
|
ASSERT_OK(Flush());
|
|
|
|
// Block cache is not important for this test.
|
|
// We use BLOCK_CACHE_DATA_* counters just because they're the most readily
|
|
// available way of counting block accesses.
|
|
|
|
ReadOptions ropt;
|
|
ropt.tailing = tailing;
|
|
std::unique_ptr<Iterator> iter(NewIterator(ropt));
|
|
|
|
iter->Seek("b10");
|
|
ASSERT_TRUE(iter->Valid());
|
|
EXPECT_EQ("b2", iter->key().ToString());
|
|
EXPECT_EQ("y2", iter->value().ToString());
|
|
EXPECT_EQ(1, stats->getTickerCount(BLOCK_CACHE_DATA_MISS));
|
|
|
|
iter->Next();
|
|
ASSERT_TRUE(iter->Valid());
|
|
EXPECT_EQ("b3", iter->key().ToString());
|
|
EXPECT_EQ("y3", iter->value().ToString());
|
|
EXPECT_EQ(2, stats->getTickerCount(BLOCK_CACHE_DATA_MISS));
|
|
EXPECT_EQ(0, stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
|
|
|
|
iter->Seek("c0");
|
|
ASSERT_TRUE(iter->Valid());
|
|
EXPECT_EQ("c0", iter->key().ToString());
|
|
EXPECT_EQ("z1,z2", iter->value().ToString());
|
|
EXPECT_EQ(0, stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
|
|
EXPECT_EQ(4, stats->getTickerCount(BLOCK_CACHE_DATA_MISS));
|
|
|
|
iter->Next();
|
|
ASSERT_TRUE(iter->Valid());
|
|
EXPECT_EQ("c3", iter->key().ToString());
|
|
EXPECT_EQ("z3", iter->value().ToString());
|
|
EXPECT_EQ(0, stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
|
|
EXPECT_EQ(5, stats->getTickerCount(BLOCK_CACHE_DATA_MISS));
|
|
|
|
iter.reset();
|
|
|
|
// Enable iterate_upper_bound and check that iterator is not trying to read
|
|
// blocks that are fully above upper bound.
|
|
std::string ub = "b3";
|
|
Slice ub_slice(ub);
|
|
ropt.iterate_upper_bound = &ub_slice;
|
|
iter.reset(NewIterator(ropt));
|
|
|
|
iter->Seek("b2");
|
|
ASSERT_TRUE(iter->Valid());
|
|
EXPECT_EQ("b2", iter->key().ToString());
|
|
EXPECT_EQ("y2", iter->value().ToString());
|
|
EXPECT_EQ(1, stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
|
|
EXPECT_EQ(5, stats->getTickerCount(BLOCK_CACHE_DATA_MISS));
|
|
|
|
iter->Next();
|
|
ASSERT_FALSE(iter->Valid());
|
|
EXPECT_EQ(1, stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
|
|
EXPECT_EQ(5, stats->getTickerCount(BLOCK_CACHE_DATA_MISS));
|
|
}
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, IndexWithFirstKeyGet) {
|
|
Options options = CurrentOptions();
|
|
options.env = env_;
|
|
options.create_if_missing = true;
|
|
options.prefix_extractor = nullptr;
|
|
options.merge_operator = MergeOperators::CreateStringAppendOperator();
|
|
options.statistics = rocksdb::CreateDBStatistics();
|
|
Statistics* stats = options.statistics.get();
|
|
BlockBasedTableOptions table_options;
|
|
table_options.index_type =
|
|
BlockBasedTableOptions::IndexType::kBinarySearchWithFirstKey;
|
|
table_options.index_shortening =
|
|
BlockBasedTableOptions::IndexShorteningMode::kNoShortening;
|
|
table_options.flush_block_policy_factory =
|
|
std::make_shared<FlushBlockEveryKeyPolicyFactory>();
|
|
table_options.block_cache = NewLRUCache(1000); // fits all blocks
|
|
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
|
|
|
|
DestroyAndReopen(options);
|
|
ASSERT_OK(Merge("a", "x1"));
|
|
ASSERT_OK(Merge("c", "y1"));
|
|
ASSERT_OK(Merge("e", "z1"));
|
|
ASSERT_OK(Flush());
|
|
ASSERT_OK(Merge("c", "y2"));
|
|
ASSERT_OK(Merge("e", "z2"));
|
|
ASSERT_OK(Flush());
|
|
|
|
// Get() between blocks shouldn't read any blocks.
|
|
ASSERT_EQ("NOT_FOUND", Get("b"));
|
|
EXPECT_EQ(0, stats->getTickerCount(BLOCK_CACHE_DATA_MISS));
|
|
EXPECT_EQ(0, stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
|
|
|
|
// Get() of an existing key shouldn't read any unnecessary blocks when there's
|
|
// only one key per block.
|
|
|
|
ASSERT_EQ("y1,y2", Get("c"));
|
|
EXPECT_EQ(2, stats->getTickerCount(BLOCK_CACHE_DATA_MISS));
|
|
EXPECT_EQ(0, stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
|
|
|
|
ASSERT_EQ("x1", Get("a"));
|
|
EXPECT_EQ(3, stats->getTickerCount(BLOCK_CACHE_DATA_MISS));
|
|
EXPECT_EQ(0, stats->getTickerCount(BLOCK_CACHE_DATA_HIT));
|
|
|
|
EXPECT_EQ(std::vector<std::string>({"NOT_FOUND", "z1,z2"}),
|
|
MultiGet({"b", "e"}));
|
|
}
|
|
|
|
// TODO(3.13): fix the issue of Seek() + Prev() which might not necessary
|
|
// return the biggest key which is smaller than the seek key.
|
|
TEST_P(DBIteratorTest, PrevAfterAndNextAfterMerge) {
|
|
Options options;
|
|
options.create_if_missing = true;
|
|
options.merge_operator = MergeOperators::CreatePutOperator();
|
|
options.env = env_;
|
|
DestroyAndReopen(options);
|
|
|
|
// write three entries with different keys using Merge()
|
|
WriteOptions wopts;
|
|
db_->Merge(wopts, "1", "data1");
|
|
db_->Merge(wopts, "2", "data2");
|
|
db_->Merge(wopts, "3", "data3");
|
|
|
|
std::unique_ptr<Iterator> it(NewIterator(ReadOptions()));
|
|
|
|
it->Seek("2");
|
|
ASSERT_TRUE(it->Valid());
|
|
ASSERT_EQ("2", it->key().ToString());
|
|
|
|
it->Prev();
|
|
ASSERT_TRUE(it->Valid());
|
|
ASSERT_EQ("1", it->key().ToString());
|
|
|
|
it->SeekForPrev("1");
|
|
ASSERT_TRUE(it->Valid());
|
|
ASSERT_EQ("1", it->key().ToString());
|
|
|
|
it->Next();
|
|
ASSERT_TRUE(it->Valid());
|
|
ASSERT_EQ("2", it->key().ToString());
|
|
}
|
|
|
|
class DBIteratorTestForPinnedData : public DBIteratorTest {
|
|
public:
|
|
enum TestConfig {
|
|
NORMAL,
|
|
CLOSE_AND_OPEN,
|
|
COMPACT_BEFORE_READ,
|
|
FLUSH_EVERY_1000,
|
|
MAX
|
|
};
|
|
DBIteratorTestForPinnedData() : DBIteratorTest() {}
|
|
void PinnedDataIteratorRandomized(TestConfig run_config) {
|
|
// Generate Random data
|
|
Random rnd(301);
|
|
|
|
int puts = 100000;
|
|
int key_pool = static_cast<int>(puts * 0.7);
|
|
int key_size = 100;
|
|
int val_size = 1000;
|
|
int seeks_percentage = 20; // 20% of keys will be used to test seek()
|
|
int delete_percentage = 20; // 20% of keys will be deleted
|
|
int merge_percentage = 20; // 20% of keys will be added using Merge()
|
|
|
|
Options options = CurrentOptions();
|
|
BlockBasedTableOptions table_options;
|
|
table_options.use_delta_encoding = false;
|
|
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
|
|
options.merge_operator = MergeOperators::CreatePutOperator();
|
|
DestroyAndReopen(options);
|
|
|
|
std::vector<std::string> generated_keys(key_pool);
|
|
for (int i = 0; i < key_pool; i++) {
|
|
generated_keys[i] = RandomString(&rnd, key_size);
|
|
}
|
|
|
|
std::map<std::string, std::string> true_data;
|
|
std::vector<std::string> random_keys;
|
|
std::vector<std::string> deleted_keys;
|
|
for (int i = 0; i < puts; i++) {
|
|
auto& k = generated_keys[rnd.Next() % key_pool];
|
|
auto v = RandomString(&rnd, val_size);
|
|
|
|
// Insert data to true_data map and to DB
|
|
true_data[k] = v;
|
|
if (rnd.OneIn(static_cast<int>(100.0 / merge_percentage))) {
|
|
ASSERT_OK(db_->Merge(WriteOptions(), k, v));
|
|
} else {
|
|
ASSERT_OK(Put(k, v));
|
|
}
|
|
|
|
// Pick random keys to be used to test Seek()
|
|
if (rnd.OneIn(static_cast<int>(100.0 / seeks_percentage))) {
|
|
random_keys.push_back(k);
|
|
}
|
|
|
|
// Delete some random keys
|
|
if (rnd.OneIn(static_cast<int>(100.0 / delete_percentage))) {
|
|
deleted_keys.push_back(k);
|
|
true_data.erase(k);
|
|
ASSERT_OK(Delete(k));
|
|
}
|
|
|
|
if (run_config == TestConfig::FLUSH_EVERY_1000) {
|
|
if (i && i % 1000 == 0) {
|
|
Flush();
|
|
}
|
|
}
|
|
}
|
|
|
|
if (run_config == TestConfig::CLOSE_AND_OPEN) {
|
|
Close();
|
|
Reopen(options);
|
|
} else if (run_config == TestConfig::COMPACT_BEFORE_READ) {
|
|
db_->CompactRange(CompactRangeOptions(), nullptr, nullptr);
|
|
}
|
|
|
|
ReadOptions ro;
|
|
ro.pin_data = true;
|
|
auto iter = NewIterator(ro);
|
|
|
|
{
|
|
// Test Seek to random keys
|
|
std::vector<Slice> keys_slices;
|
|
std::vector<std::string> true_keys;
|
|
for (auto& k : random_keys) {
|
|
iter->Seek(k);
|
|
if (!iter->Valid()) {
|
|
ASSERT_EQ(true_data.lower_bound(k), true_data.end());
|
|
continue;
|
|
}
|
|
std::string prop_value;
|
|
ASSERT_OK(
|
|
iter->GetProperty("rocksdb.iterator.is-key-pinned", &prop_value));
|
|
ASSERT_EQ("1", prop_value);
|
|
keys_slices.push_back(iter->key());
|
|
true_keys.push_back(true_data.lower_bound(k)->first);
|
|
}
|
|
|
|
for (size_t i = 0; i < keys_slices.size(); i++) {
|
|
ASSERT_EQ(keys_slices[i].ToString(), true_keys[i]);
|
|
}
|
|
}
|
|
|
|
{
|
|
// Test SeekForPrev to random keys
|
|
std::vector<Slice> keys_slices;
|
|
std::vector<std::string> true_keys;
|
|
for (auto& k : random_keys) {
|
|
iter->SeekForPrev(k);
|
|
if (!iter->Valid()) {
|
|
ASSERT_EQ(true_data.upper_bound(k), true_data.begin());
|
|
continue;
|
|
}
|
|
std::string prop_value;
|
|
ASSERT_OK(
|
|
iter->GetProperty("rocksdb.iterator.is-key-pinned", &prop_value));
|
|
ASSERT_EQ("1", prop_value);
|
|
keys_slices.push_back(iter->key());
|
|
true_keys.push_back((--true_data.upper_bound(k))->first);
|
|
}
|
|
|
|
for (size_t i = 0; i < keys_slices.size(); i++) {
|
|
ASSERT_EQ(keys_slices[i].ToString(), true_keys[i]);
|
|
}
|
|
}
|
|
|
|
{
|
|
// Test iterating all data forward
|
|
std::vector<Slice> all_keys;
|
|
for (iter->SeekToFirst(); iter->Valid(); iter->Next()) {
|
|
std::string prop_value;
|
|
ASSERT_OK(
|
|
iter->GetProperty("rocksdb.iterator.is-key-pinned", &prop_value));
|
|
ASSERT_EQ("1", prop_value);
|
|
all_keys.push_back(iter->key());
|
|
}
|
|
ASSERT_EQ(all_keys.size(), true_data.size());
|
|
|
|
// Verify that all keys slices are valid
|
|
auto data_iter = true_data.begin();
|
|
for (size_t i = 0; i < all_keys.size(); i++) {
|
|
ASSERT_EQ(all_keys[i].ToString(), data_iter->first);
|
|
data_iter++;
|
|
}
|
|
}
|
|
|
|
{
|
|
// Test iterating all data backward
|
|
std::vector<Slice> all_keys;
|
|
for (iter->SeekToLast(); iter->Valid(); iter->Prev()) {
|
|
std::string prop_value;
|
|
ASSERT_OK(
|
|
iter->GetProperty("rocksdb.iterator.is-key-pinned", &prop_value));
|
|
ASSERT_EQ("1", prop_value);
|
|
all_keys.push_back(iter->key());
|
|
}
|
|
ASSERT_EQ(all_keys.size(), true_data.size());
|
|
|
|
// Verify that all keys slices are valid (backward)
|
|
auto data_iter = true_data.rbegin();
|
|
for (size_t i = 0; i < all_keys.size(); i++) {
|
|
ASSERT_EQ(all_keys[i].ToString(), data_iter->first);
|
|
data_iter++;
|
|
}
|
|
}
|
|
|
|
delete iter;
|
|
}
|
|
};
|
|
|
|
TEST_P(DBIteratorTestForPinnedData, PinnedDataIteratorRandomizedNormal) {
|
|
PinnedDataIteratorRandomized(TestConfig::NORMAL);
|
|
}
|
|
|
|
TEST_P(DBIteratorTestForPinnedData, PinnedDataIteratorRandomizedCLoseAndOpen) {
|
|
PinnedDataIteratorRandomized(TestConfig::CLOSE_AND_OPEN);
|
|
}
|
|
|
|
TEST_P(DBIteratorTestForPinnedData,
|
|
PinnedDataIteratorRandomizedCompactBeforeRead) {
|
|
PinnedDataIteratorRandomized(TestConfig::COMPACT_BEFORE_READ);
|
|
}
|
|
|
|
TEST_P(DBIteratorTestForPinnedData, PinnedDataIteratorRandomizedFlush) {
|
|
PinnedDataIteratorRandomized(TestConfig::FLUSH_EVERY_1000);
|
|
}
|
|
|
|
#ifndef ROCKSDB_LITE
|
|
TEST_P(DBIteratorTest, PinnedDataIteratorMultipleFiles) {
|
|
Options options = CurrentOptions();
|
|
BlockBasedTableOptions table_options;
|
|
table_options.use_delta_encoding = false;
|
|
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
|
|
options.disable_auto_compactions = true;
|
|
options.write_buffer_size = 1024 * 1024 * 10; // 10 Mb
|
|
DestroyAndReopen(options);
|
|
|
|
std::map<std::string, std::string> true_data;
|
|
|
|
// Generate 4 sst files in L2
|
|
Random rnd(301);
|
|
for (int i = 1; i <= 1000; i++) {
|
|
std::string k = Key(i * 3);
|
|
std::string v = RandomString(&rnd, 100);
|
|
ASSERT_OK(Put(k, v));
|
|
true_data[k] = v;
|
|
if (i % 250 == 0) {
|
|
ASSERT_OK(Flush());
|
|
}
|
|
}
|
|
ASSERT_EQ(FilesPerLevel(0), "4");
|
|
ASSERT_OK(db_->CompactRange(CompactRangeOptions(), nullptr, nullptr));
|
|
ASSERT_EQ(FilesPerLevel(0), "0,4");
|
|
|
|
// Generate 4 sst files in L0
|
|
for (int i = 1; i <= 1000; i++) {
|
|
std::string k = Key(i * 2);
|
|
std::string v = RandomString(&rnd, 100);
|
|
ASSERT_OK(Put(k, v));
|
|
true_data[k] = v;
|
|
if (i % 250 == 0) {
|
|
ASSERT_OK(Flush());
|
|
}
|
|
}
|
|
ASSERT_EQ(FilesPerLevel(0), "4,4");
|
|
|
|
// Add some keys/values in memtables
|
|
for (int i = 1; i <= 1000; i++) {
|
|
std::string k = Key(i);
|
|
std::string v = RandomString(&rnd, 100);
|
|
ASSERT_OK(Put(k, v));
|
|
true_data[k] = v;
|
|
}
|
|
ASSERT_EQ(FilesPerLevel(0), "4,4");
|
|
|
|
ReadOptions ro;
|
|
ro.pin_data = true;
|
|
auto iter = NewIterator(ro);
|
|
|
|
std::vector<std::pair<Slice, std::string>> results;
|
|
for (iter->SeekToFirst(); iter->Valid(); iter->Next()) {
|
|
std::string prop_value;
|
|
ASSERT_OK(iter->GetProperty("rocksdb.iterator.is-key-pinned", &prop_value));
|
|
ASSERT_EQ("1", prop_value);
|
|
results.emplace_back(iter->key(), iter->value().ToString());
|
|
}
|
|
|
|
ASSERT_EQ(results.size(), true_data.size());
|
|
auto data_iter = true_data.begin();
|
|
for (size_t i = 0; i < results.size(); i++, data_iter++) {
|
|
auto& kv = results[i];
|
|
ASSERT_EQ(kv.first, data_iter->first);
|
|
ASSERT_EQ(kv.second, data_iter->second);
|
|
}
|
|
|
|
delete iter;
|
|
}
|
|
#endif
|
|
|
|
TEST_P(DBIteratorTest, PinnedDataIteratorMergeOperator) {
|
|
Options options = CurrentOptions();
|
|
BlockBasedTableOptions table_options;
|
|
table_options.use_delta_encoding = false;
|
|
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
|
|
options.merge_operator = MergeOperators::CreateUInt64AddOperator();
|
|
DestroyAndReopen(options);
|
|
|
|
std::string numbers[7];
|
|
for (int val = 0; val <= 6; val++) {
|
|
PutFixed64(numbers + val, val);
|
|
}
|
|
|
|
// +1 all keys in range [ 0 => 999]
|
|
for (int i = 0; i < 1000; i++) {
|
|
WriteOptions wo;
|
|
ASSERT_OK(db_->Merge(wo, Key(i), numbers[1]));
|
|
}
|
|
|
|
// +2 all keys divisible by 2 in range [ 0 => 999]
|
|
for (int i = 0; i < 1000; i += 2) {
|
|
WriteOptions wo;
|
|
ASSERT_OK(db_->Merge(wo, Key(i), numbers[2]));
|
|
}
|
|
|
|
// +3 all keys divisible by 5 in range [ 0 => 999]
|
|
for (int i = 0; i < 1000; i += 5) {
|
|
WriteOptions wo;
|
|
ASSERT_OK(db_->Merge(wo, Key(i), numbers[3]));
|
|
}
|
|
|
|
ReadOptions ro;
|
|
ro.pin_data = true;
|
|
auto iter = NewIterator(ro);
|
|
|
|
std::vector<std::pair<Slice, std::string>> results;
|
|
for (iter->SeekToFirst(); iter->Valid(); iter->Next()) {
|
|
std::string prop_value;
|
|
ASSERT_OK(iter->GetProperty("rocksdb.iterator.is-key-pinned", &prop_value));
|
|
ASSERT_EQ("1", prop_value);
|
|
results.emplace_back(iter->key(), iter->value().ToString());
|
|
}
|
|
|
|
ASSERT_EQ(results.size(), 1000);
|
|
for (size_t i = 0; i < results.size(); i++) {
|
|
auto& kv = results[i];
|
|
ASSERT_EQ(kv.first, Key(static_cast<int>(i)));
|
|
int expected_val = 1;
|
|
if (i % 2 == 0) {
|
|
expected_val += 2;
|
|
}
|
|
if (i % 5 == 0) {
|
|
expected_val += 3;
|
|
}
|
|
ASSERT_EQ(kv.second, numbers[expected_val]);
|
|
}
|
|
|
|
delete iter;
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, PinnedDataIteratorReadAfterUpdate) {
|
|
Options options = CurrentOptions();
|
|
BlockBasedTableOptions table_options;
|
|
table_options.use_delta_encoding = false;
|
|
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
|
|
options.write_buffer_size = 100000;
|
|
DestroyAndReopen(options);
|
|
|
|
Random rnd(301);
|
|
|
|
std::map<std::string, std::string> true_data;
|
|
for (int i = 0; i < 1000; i++) {
|
|
std::string k = RandomString(&rnd, 10);
|
|
std::string v = RandomString(&rnd, 1000);
|
|
ASSERT_OK(Put(k, v));
|
|
true_data[k] = v;
|
|
}
|
|
|
|
ReadOptions ro;
|
|
ro.pin_data = true;
|
|
auto iter = NewIterator(ro);
|
|
|
|
// Delete 50% of the keys and update the other 50%
|
|
for (auto& kv : true_data) {
|
|
if (rnd.OneIn(2)) {
|
|
ASSERT_OK(Delete(kv.first));
|
|
} else {
|
|
std::string new_val = RandomString(&rnd, 1000);
|
|
ASSERT_OK(Put(kv.first, new_val));
|
|
}
|
|
}
|
|
|
|
std::vector<std::pair<Slice, std::string>> results;
|
|
for (iter->SeekToFirst(); iter->Valid(); iter->Next()) {
|
|
std::string prop_value;
|
|
ASSERT_OK(iter->GetProperty("rocksdb.iterator.is-key-pinned", &prop_value));
|
|
ASSERT_EQ("1", prop_value);
|
|
results.emplace_back(iter->key(), iter->value().ToString());
|
|
}
|
|
|
|
auto data_iter = true_data.begin();
|
|
for (size_t i = 0; i < results.size(); i++, data_iter++) {
|
|
auto& kv = results[i];
|
|
ASSERT_EQ(kv.first, data_iter->first);
|
|
ASSERT_EQ(kv.second, data_iter->second);
|
|
}
|
|
|
|
delete iter;
|
|
}
|
|
|
|
class SliceTransformLimitedDomainGeneric : public SliceTransform {
|
|
const char* Name() const override {
|
|
return "SliceTransformLimitedDomainGeneric";
|
|
}
|
|
|
|
Slice Transform(const Slice& src) const override {
|
|
return Slice(src.data(), 1);
|
|
}
|
|
|
|
bool InDomain(const Slice& src) const override {
|
|
// prefix will be x????
|
|
return src.size() >= 1;
|
|
}
|
|
|
|
bool InRange(const Slice& dst) const override {
|
|
// prefix will be x????
|
|
return dst.size() == 1;
|
|
}
|
|
};
|
|
|
|
TEST_P(DBIteratorTest, IterSeekForPrevCrossingFiles) {
|
|
Options options = CurrentOptions();
|
|
options.prefix_extractor.reset(NewFixedPrefixTransform(1));
|
|
options.disable_auto_compactions = true;
|
|
// Enable prefix bloom for SST files
|
|
BlockBasedTableOptions table_options;
|
|
table_options.filter_policy.reset(NewBloomFilterPolicy(10, true));
|
|
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
|
|
DestroyAndReopen(options);
|
|
|
|
ASSERT_OK(Put("a1", "va1"));
|
|
ASSERT_OK(Put("a2", "va2"));
|
|
ASSERT_OK(Put("a3", "va3"));
|
|
ASSERT_OK(Flush());
|
|
|
|
ASSERT_OK(Put("b1", "vb1"));
|
|
ASSERT_OK(Put("b2", "vb2"));
|
|
ASSERT_OK(Put("b3", "vb3"));
|
|
ASSERT_OK(Flush());
|
|
|
|
ASSERT_OK(Put("b4", "vb4"));
|
|
ASSERT_OK(Put("d1", "vd1"));
|
|
ASSERT_OK(Put("d2", "vd2"));
|
|
ASSERT_OK(Put("d4", "vd4"));
|
|
ASSERT_OK(Flush());
|
|
|
|
MoveFilesToLevel(1);
|
|
{
|
|
ReadOptions ro;
|
|
Iterator* iter = NewIterator(ro);
|
|
|
|
iter->SeekForPrev("a4");
|
|
ASSERT_EQ(iter->key().ToString(), "a3");
|
|
ASSERT_EQ(iter->value().ToString(), "va3");
|
|
|
|
iter->SeekForPrev("c2");
|
|
ASSERT_EQ(iter->key().ToString(), "b3");
|
|
iter->SeekForPrev("d3");
|
|
ASSERT_EQ(iter->key().ToString(), "d2");
|
|
iter->SeekForPrev("b5");
|
|
ASSERT_EQ(iter->key().ToString(), "b4");
|
|
delete iter;
|
|
}
|
|
|
|
{
|
|
ReadOptions ro;
|
|
ro.prefix_same_as_start = true;
|
|
Iterator* iter = NewIterator(ro);
|
|
iter->SeekForPrev("c2");
|
|
ASSERT_TRUE(!iter->Valid());
|
|
delete iter;
|
|
}
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, IterSeekForPrevCrossingFilesCustomPrefixExtractor) {
|
|
Options options = CurrentOptions();
|
|
options.prefix_extractor =
|
|
std::make_shared<SliceTransformLimitedDomainGeneric>();
|
|
options.disable_auto_compactions = true;
|
|
// Enable prefix bloom for SST files
|
|
BlockBasedTableOptions table_options;
|
|
table_options.filter_policy.reset(NewBloomFilterPolicy(10, true));
|
|
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
|
|
DestroyAndReopen(options);
|
|
|
|
ASSERT_OK(Put("a1", "va1"));
|
|
ASSERT_OK(Put("a2", "va2"));
|
|
ASSERT_OK(Put("a3", "va3"));
|
|
ASSERT_OK(Flush());
|
|
|
|
ASSERT_OK(Put("b1", "vb1"));
|
|
ASSERT_OK(Put("b2", "vb2"));
|
|
ASSERT_OK(Put("b3", "vb3"));
|
|
ASSERT_OK(Flush());
|
|
|
|
ASSERT_OK(Put("b4", "vb4"));
|
|
ASSERT_OK(Put("d1", "vd1"));
|
|
ASSERT_OK(Put("d2", "vd2"));
|
|
ASSERT_OK(Put("d4", "vd4"));
|
|
ASSERT_OK(Flush());
|
|
|
|
MoveFilesToLevel(1);
|
|
{
|
|
ReadOptions ro;
|
|
Iterator* iter = NewIterator(ro);
|
|
|
|
iter->SeekForPrev("a4");
|
|
ASSERT_EQ(iter->key().ToString(), "a3");
|
|
ASSERT_EQ(iter->value().ToString(), "va3");
|
|
|
|
iter->SeekForPrev("c2");
|
|
ASSERT_EQ(iter->key().ToString(), "b3");
|
|
iter->SeekForPrev("d3");
|
|
ASSERT_EQ(iter->key().ToString(), "d2");
|
|
iter->SeekForPrev("b5");
|
|
ASSERT_EQ(iter->key().ToString(), "b4");
|
|
delete iter;
|
|
}
|
|
|
|
{
|
|
ReadOptions ro;
|
|
ro.prefix_same_as_start = true;
|
|
Iterator* iter = NewIterator(ro);
|
|
iter->SeekForPrev("c2");
|
|
ASSERT_TRUE(!iter->Valid());
|
|
delete iter;
|
|
}
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, IterPrevKeyCrossingBlocks) {
|
|
Options options = CurrentOptions();
|
|
BlockBasedTableOptions table_options;
|
|
table_options.block_size = 1; // every block will contain one entry
|
|
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
|
|
options.merge_operator = MergeOperators::CreateStringAppendTESTOperator();
|
|
options.disable_auto_compactions = true;
|
|
options.max_sequential_skip_in_iterations = 8;
|
|
|
|
DestroyAndReopen(options);
|
|
|
|
// Putting such deletes will force DBIter::Prev() to fallback to a Seek
|
|
for (int file_num = 0; file_num < 10; file_num++) {
|
|
ASSERT_OK(Delete("key4"));
|
|
ASSERT_OK(Flush());
|
|
}
|
|
|
|
// First File containing 5 blocks of puts
|
|
ASSERT_OK(Put("key1", "val1.0"));
|
|
ASSERT_OK(Put("key2", "val2.0"));
|
|
ASSERT_OK(Put("key3", "val3.0"));
|
|
ASSERT_OK(Put("key4", "val4.0"));
|
|
ASSERT_OK(Put("key5", "val5.0"));
|
|
ASSERT_OK(Flush());
|
|
|
|
// Second file containing 9 blocks of merge operands
|
|
ASSERT_OK(db_->Merge(WriteOptions(), "key1", "val1.1"));
|
|
ASSERT_OK(db_->Merge(WriteOptions(), "key1", "val1.2"));
|
|
|
|
ASSERT_OK(db_->Merge(WriteOptions(), "key2", "val2.1"));
|
|
ASSERT_OK(db_->Merge(WriteOptions(), "key2", "val2.2"));
|
|
ASSERT_OK(db_->Merge(WriteOptions(), "key2", "val2.3"));
|
|
|
|
ASSERT_OK(db_->Merge(WriteOptions(), "key3", "val3.1"));
|
|
ASSERT_OK(db_->Merge(WriteOptions(), "key3", "val3.2"));
|
|
ASSERT_OK(db_->Merge(WriteOptions(), "key3", "val3.3"));
|
|
ASSERT_OK(db_->Merge(WriteOptions(), "key3", "val3.4"));
|
|
ASSERT_OK(Flush());
|
|
|
|
{
|
|
ReadOptions ro;
|
|
ro.fill_cache = false;
|
|
Iterator* iter = NewIterator(ro);
|
|
|
|
iter->SeekToLast();
|
|
ASSERT_EQ(iter->key().ToString(), "key5");
|
|
ASSERT_EQ(iter->value().ToString(), "val5.0");
|
|
|
|
iter->Prev();
|
|
ASSERT_EQ(iter->key().ToString(), "key4");
|
|
ASSERT_EQ(iter->value().ToString(), "val4.0");
|
|
|
|
iter->Prev();
|
|
ASSERT_EQ(iter->key().ToString(), "key3");
|
|
ASSERT_EQ(iter->value().ToString(), "val3.0,val3.1,val3.2,val3.3,val3.4");
|
|
|
|
iter->Prev();
|
|
ASSERT_EQ(iter->key().ToString(), "key2");
|
|
ASSERT_EQ(iter->value().ToString(), "val2.0,val2.1,val2.2,val2.3");
|
|
|
|
iter->Prev();
|
|
ASSERT_EQ(iter->key().ToString(), "key1");
|
|
ASSERT_EQ(iter->value().ToString(), "val1.0,val1.1,val1.2");
|
|
|
|
delete iter;
|
|
}
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, IterPrevKeyCrossingBlocksRandomized) {
|
|
Options options = CurrentOptions();
|
|
options.merge_operator = MergeOperators::CreateStringAppendTESTOperator();
|
|
options.disable_auto_compactions = true;
|
|
options.level0_slowdown_writes_trigger = (1 << 30);
|
|
options.level0_stop_writes_trigger = (1 << 30);
|
|
options.max_sequential_skip_in_iterations = 8;
|
|
DestroyAndReopen(options);
|
|
|
|
const int kNumKeys = 500;
|
|
// Small number of merge operands to make sure that DBIter::Prev() dont
|
|
// fall back to Seek()
|
|
const int kNumMergeOperands = 3;
|
|
// Use value size that will make sure that every block contain 1 key
|
|
const int kValSize =
|
|
static_cast<int>(BlockBasedTableOptions().block_size) * 4;
|
|
// Percentage of keys that wont get merge operations
|
|
const int kNoMergeOpPercentage = 20;
|
|
// Percentage of keys that will be deleted
|
|
const int kDeletePercentage = 10;
|
|
|
|
// For half of the key range we will write multiple deletes first to
|
|
// force DBIter::Prev() to fall back to Seek()
|
|
for (int file_num = 0; file_num < 10; file_num++) {
|
|
for (int i = 0; i < kNumKeys; i += 2) {
|
|
ASSERT_OK(Delete(Key(i)));
|
|
}
|
|
ASSERT_OK(Flush());
|
|
}
|
|
|
|
Random rnd(301);
|
|
std::map<std::string, std::string> true_data;
|
|
std::string gen_key;
|
|
std::string gen_val;
|
|
|
|
for (int i = 0; i < kNumKeys; i++) {
|
|
gen_key = Key(i);
|
|
gen_val = RandomString(&rnd, kValSize);
|
|
|
|
ASSERT_OK(Put(gen_key, gen_val));
|
|
true_data[gen_key] = gen_val;
|
|
}
|
|
ASSERT_OK(Flush());
|
|
|
|
// Separate values and merge operands in different file so that we
|
|
// make sure that we dont merge them while flushing but actually
|
|
// merge them in the read path
|
|
for (int i = 0; i < kNumKeys; i++) {
|
|
if (rnd.OneIn(static_cast<int>(100.0 / kNoMergeOpPercentage))) {
|
|
// Dont give merge operations for some keys
|
|
continue;
|
|
}
|
|
|
|
for (int j = 0; j < kNumMergeOperands; j++) {
|
|
gen_key = Key(i);
|
|
gen_val = RandomString(&rnd, kValSize);
|
|
|
|
ASSERT_OK(db_->Merge(WriteOptions(), gen_key, gen_val));
|
|
true_data[gen_key] += "," + gen_val;
|
|
}
|
|
}
|
|
ASSERT_OK(Flush());
|
|
|
|
for (int i = 0; i < kNumKeys; i++) {
|
|
if (rnd.OneIn(static_cast<int>(100.0 / kDeletePercentage))) {
|
|
gen_key = Key(i);
|
|
|
|
ASSERT_OK(Delete(gen_key));
|
|
true_data.erase(gen_key);
|
|
}
|
|
}
|
|
ASSERT_OK(Flush());
|
|
|
|
{
|
|
ReadOptions ro;
|
|
ro.fill_cache = false;
|
|
Iterator* iter = NewIterator(ro);
|
|
auto data_iter = true_data.rbegin();
|
|
|
|
for (iter->SeekToLast(); iter->Valid(); iter->Prev()) {
|
|
ASSERT_EQ(iter->key().ToString(), data_iter->first);
|
|
ASSERT_EQ(iter->value().ToString(), data_iter->second);
|
|
data_iter++;
|
|
}
|
|
ASSERT_EQ(data_iter, true_data.rend());
|
|
|
|
delete iter;
|
|
}
|
|
|
|
{
|
|
ReadOptions ro;
|
|
ro.fill_cache = false;
|
|
Iterator* iter = NewIterator(ro);
|
|
auto data_iter = true_data.rbegin();
|
|
|
|
int entries_right = 0;
|
|
std::string seek_key;
|
|
for (iter->SeekToLast(); iter->Valid(); iter->Prev()) {
|
|
// Verify key/value of current position
|
|
ASSERT_EQ(iter->key().ToString(), data_iter->first);
|
|
ASSERT_EQ(iter->value().ToString(), data_iter->second);
|
|
|
|
bool restore_position_with_seek = rnd.Uniform(2);
|
|
if (restore_position_with_seek) {
|
|
seek_key = iter->key().ToString();
|
|
}
|
|
|
|
// Do some Next() operations the restore the iterator to orignal position
|
|
int next_count =
|
|
entries_right > 0 ? rnd.Uniform(std::min(entries_right, 10)) : 0;
|
|
for (int i = 0; i < next_count; i++) {
|
|
iter->Next();
|
|
data_iter--;
|
|
|
|
ASSERT_EQ(iter->key().ToString(), data_iter->first);
|
|
ASSERT_EQ(iter->value().ToString(), data_iter->second);
|
|
}
|
|
|
|
if (restore_position_with_seek) {
|
|
// Restore orignal position using Seek()
|
|
iter->Seek(seek_key);
|
|
for (int i = 0; i < next_count; i++) {
|
|
data_iter++;
|
|
}
|
|
|
|
ASSERT_EQ(iter->key().ToString(), data_iter->first);
|
|
ASSERT_EQ(iter->value().ToString(), data_iter->second);
|
|
} else {
|
|
// Restore original position using Prev()
|
|
for (int i = 0; i < next_count; i++) {
|
|
iter->Prev();
|
|
data_iter++;
|
|
|
|
ASSERT_EQ(iter->key().ToString(), data_iter->first);
|
|
ASSERT_EQ(iter->value().ToString(), data_iter->second);
|
|
}
|
|
}
|
|
|
|
entries_right++;
|
|
data_iter++;
|
|
}
|
|
ASSERT_EQ(data_iter, true_data.rend());
|
|
|
|
delete iter;
|
|
}
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, IteratorWithLocalStatistics) {
|
|
Options options = CurrentOptions();
|
|
options.statistics = rocksdb::CreateDBStatistics();
|
|
DestroyAndReopen(options);
|
|
|
|
Random rnd(301);
|
|
for (int i = 0; i < 1000; i++) {
|
|
// Key 10 bytes / Value 10 bytes
|
|
ASSERT_OK(Put(RandomString(&rnd, 10), RandomString(&rnd, 10)));
|
|
}
|
|
|
|
std::atomic<uint64_t> total_next(0);
|
|
std::atomic<uint64_t> total_next_found(0);
|
|
std::atomic<uint64_t> total_prev(0);
|
|
std::atomic<uint64_t> total_prev_found(0);
|
|
std::atomic<uint64_t> total_bytes(0);
|
|
|
|
std::vector<port::Thread> threads;
|
|
std::function<void()> reader_func_next = [&]() {
|
|
SetPerfLevel(kEnableCount);
|
|
get_perf_context()->Reset();
|
|
Iterator* iter = NewIterator(ReadOptions());
|
|
|
|
iter->SeekToFirst();
|
|
// Seek will bump ITER_BYTES_READ
|
|
uint64_t bytes = 0;
|
|
bytes += iter->key().size();
|
|
bytes += iter->value().size();
|
|
while (true) {
|
|
iter->Next();
|
|
total_next++;
|
|
|
|
if (!iter->Valid()) {
|
|
break;
|
|
}
|
|
total_next_found++;
|
|
bytes += iter->key().size();
|
|
bytes += iter->value().size();
|
|
}
|
|
|
|
delete iter;
|
|
ASSERT_EQ(bytes, get_perf_context()->iter_read_bytes);
|
|
SetPerfLevel(kDisable);
|
|
total_bytes += bytes;
|
|
};
|
|
|
|
std::function<void()> reader_func_prev = [&]() {
|
|
SetPerfLevel(kEnableCount);
|
|
Iterator* iter = NewIterator(ReadOptions());
|
|
|
|
iter->SeekToLast();
|
|
// Seek will bump ITER_BYTES_READ
|
|
uint64_t bytes = 0;
|
|
bytes += iter->key().size();
|
|
bytes += iter->value().size();
|
|
while (true) {
|
|
iter->Prev();
|
|
total_prev++;
|
|
|
|
if (!iter->Valid()) {
|
|
break;
|
|
}
|
|
total_prev_found++;
|
|
bytes += iter->key().size();
|
|
bytes += iter->value().size();
|
|
}
|
|
|
|
delete iter;
|
|
ASSERT_EQ(bytes, get_perf_context()->iter_read_bytes);
|
|
SetPerfLevel(kDisable);
|
|
total_bytes += bytes;
|
|
};
|
|
|
|
for (int i = 0; i < 10; i++) {
|
|
threads.emplace_back(reader_func_next);
|
|
}
|
|
for (int i = 0; i < 15; i++) {
|
|
threads.emplace_back(reader_func_prev);
|
|
}
|
|
|
|
for (auto& t : threads) {
|
|
t.join();
|
|
}
|
|
|
|
ASSERT_EQ(TestGetTickerCount(options, NUMBER_DB_NEXT), (uint64_t)total_next);
|
|
ASSERT_EQ(TestGetTickerCount(options, NUMBER_DB_NEXT_FOUND),
|
|
(uint64_t)total_next_found);
|
|
ASSERT_EQ(TestGetTickerCount(options, NUMBER_DB_PREV), (uint64_t)total_prev);
|
|
ASSERT_EQ(TestGetTickerCount(options, NUMBER_DB_PREV_FOUND),
|
|
(uint64_t)total_prev_found);
|
|
ASSERT_EQ(TestGetTickerCount(options, ITER_BYTES_READ), (uint64_t)total_bytes);
|
|
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, ReadAhead) {
|
|
Options options;
|
|
env_->count_random_reads_ = true;
|
|
options.env = env_;
|
|
options.disable_auto_compactions = true;
|
|
options.write_buffer_size = 4 << 20;
|
|
options.statistics = rocksdb::CreateDBStatistics();
|
|
BlockBasedTableOptions table_options;
|
|
table_options.block_size = 1024;
|
|
table_options.no_block_cache = true;
|
|
options.table_factory.reset(new BlockBasedTableFactory(table_options));
|
|
Reopen(options);
|
|
|
|
std::string value(1024, 'a');
|
|
for (int i = 0; i < 100; i++) {
|
|
Put(Key(i), value);
|
|
}
|
|
ASSERT_OK(Flush());
|
|
MoveFilesToLevel(2);
|
|
|
|
for (int i = 0; i < 100; i++) {
|
|
Put(Key(i), value);
|
|
}
|
|
ASSERT_OK(Flush());
|
|
MoveFilesToLevel(1);
|
|
|
|
for (int i = 0; i < 100; i++) {
|
|
Put(Key(i), value);
|
|
}
|
|
ASSERT_OK(Flush());
|
|
#ifndef ROCKSDB_LITE
|
|
ASSERT_EQ("1,1,1", FilesPerLevel());
|
|
#endif // !ROCKSDB_LITE
|
|
|
|
env_->random_read_bytes_counter_ = 0;
|
|
options.statistics->setTickerCount(NO_FILE_OPENS, 0);
|
|
ReadOptions read_options;
|
|
auto* iter = NewIterator(read_options);
|
|
iter->SeekToFirst();
|
|
int64_t num_file_opens = TestGetTickerCount(options, NO_FILE_OPENS);
|
|
size_t bytes_read = env_->random_read_bytes_counter_;
|
|
delete iter;
|
|
|
|
int64_t num_file_closes = TestGetTickerCount(options, NO_FILE_CLOSES);
|
|
env_->random_read_bytes_counter_ = 0;
|
|
options.statistics->setTickerCount(NO_FILE_OPENS, 0);
|
|
read_options.readahead_size = 1024 * 10;
|
|
iter = NewIterator(read_options);
|
|
iter->SeekToFirst();
|
|
int64_t num_file_opens_readahead = TestGetTickerCount(options, NO_FILE_OPENS);
|
|
size_t bytes_read_readahead = env_->random_read_bytes_counter_;
|
|
delete iter;
|
|
int64_t num_file_closes_readahead =
|
|
TestGetTickerCount(options, NO_FILE_CLOSES);
|
|
ASSERT_EQ(num_file_opens, num_file_opens_readahead);
|
|
ASSERT_EQ(num_file_closes, num_file_closes_readahead);
|
|
ASSERT_GT(bytes_read_readahead, bytes_read);
|
|
ASSERT_GT(bytes_read_readahead, read_options.readahead_size * 3);
|
|
|
|
// Verify correctness.
|
|
iter = NewIterator(read_options);
|
|
int count = 0;
|
|
for (iter->SeekToFirst(); iter->Valid(); iter->Next()) {
|
|
ASSERT_EQ(value, iter->value());
|
|
count++;
|
|
}
|
|
ASSERT_EQ(100, count);
|
|
for (int i = 0; i < 100; i++) {
|
|
iter->Seek(Key(i));
|
|
ASSERT_EQ(value, iter->value());
|
|
}
|
|
delete iter;
|
|
}
|
|
|
|
// Insert a key, create a snapshot iterator, overwrite key lots of times,
|
|
// seek to a smaller key. Expect DBIter to fall back to a seek instead of
|
|
// going through all the overwrites linearly.
|
|
TEST_P(DBIteratorTest, DBIteratorSkipRecentDuplicatesTest) {
|
|
Options options = CurrentOptions();
|
|
options.env = env_;
|
|
options.create_if_missing = true;
|
|
options.max_sequential_skip_in_iterations = 3;
|
|
options.prefix_extractor = nullptr;
|
|
options.write_buffer_size = 1 << 27; // big enough to avoid flush
|
|
options.statistics = rocksdb::CreateDBStatistics();
|
|
DestroyAndReopen(options);
|
|
|
|
// Insert.
|
|
ASSERT_OK(Put("b", "0"));
|
|
|
|
// Create iterator.
|
|
ReadOptions ro;
|
|
std::unique_ptr<Iterator> iter(NewIterator(ro));
|
|
|
|
// Insert a lot.
|
|
for (int i = 0; i < 100; ++i) {
|
|
ASSERT_OK(Put("b", std::to_string(i + 1).c_str()));
|
|
}
|
|
|
|
#ifndef ROCKSDB_LITE
|
|
// Check that memtable wasn't flushed.
|
|
std::string val;
|
|
ASSERT_TRUE(db_->GetProperty("rocksdb.num-files-at-level0", &val));
|
|
EXPECT_EQ("0", val);
|
|
#endif
|
|
|
|
// Seek iterator to a smaller key.
|
|
get_perf_context()->Reset();
|
|
iter->Seek("a");
|
|
ASSERT_TRUE(iter->Valid());
|
|
EXPECT_EQ("b", iter->key().ToString());
|
|
EXPECT_EQ("0", iter->value().ToString());
|
|
|
|
// Check that the seek didn't do too much work.
|
|
// Checks are not tight, just make sure that everything is well below 100.
|
|
EXPECT_LT(get_perf_context()->internal_key_skipped_count, 4);
|
|
EXPECT_LT(get_perf_context()->internal_recent_skipped_count, 8);
|
|
EXPECT_LT(get_perf_context()->seek_on_memtable_count, 10);
|
|
EXPECT_LT(get_perf_context()->next_on_memtable_count, 10);
|
|
EXPECT_LT(get_perf_context()->prev_on_memtable_count, 10);
|
|
|
|
// Check that iterator did something like what we expect.
|
|
EXPECT_EQ(get_perf_context()->internal_delete_skipped_count, 0);
|
|
EXPECT_EQ(get_perf_context()->internal_merge_count, 0);
|
|
EXPECT_GE(get_perf_context()->internal_recent_skipped_count, 2);
|
|
EXPECT_GE(get_perf_context()->seek_on_memtable_count, 2);
|
|
EXPECT_EQ(1, options.statistics->getTickerCount(
|
|
NUMBER_OF_RESEEKS_IN_ITERATION));
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, Refresh) {
|
|
ASSERT_OK(Put("x", "y"));
|
|
|
|
std::unique_ptr<Iterator> iter(NewIterator(ReadOptions()));
|
|
iter->Seek(Slice("a"));
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("x")), 0);
|
|
iter->Next();
|
|
ASSERT_FALSE(iter->Valid());
|
|
|
|
ASSERT_OK(Put("c", "d"));
|
|
|
|
iter->Seek(Slice("a"));
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("x")), 0);
|
|
iter->Next();
|
|
ASSERT_FALSE(iter->Valid());
|
|
|
|
iter->Refresh();
|
|
|
|
iter->Seek(Slice("a"));
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("c")), 0);
|
|
iter->Next();
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("x")), 0);
|
|
iter->Next();
|
|
ASSERT_FALSE(iter->Valid());
|
|
|
|
dbfull()->Flush(FlushOptions());
|
|
|
|
ASSERT_OK(Put("m", "n"));
|
|
|
|
iter->Seek(Slice("a"));
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("c")), 0);
|
|
iter->Next();
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("x")), 0);
|
|
iter->Next();
|
|
ASSERT_FALSE(iter->Valid());
|
|
|
|
iter->Refresh();
|
|
|
|
iter->Seek(Slice("a"));
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("c")), 0);
|
|
iter->Next();
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("m")), 0);
|
|
iter->Next();
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("x")), 0);
|
|
iter->Next();
|
|
ASSERT_FALSE(iter->Valid());
|
|
|
|
iter.reset();
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, RefreshWithSnapshot) {
|
|
ASSERT_OK(Put("x", "y"));
|
|
const Snapshot* snapshot = db_->GetSnapshot();
|
|
ReadOptions options;
|
|
options.snapshot = snapshot;
|
|
Iterator* iter = NewIterator(options);
|
|
|
|
iter->Seek(Slice("a"));
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("x")), 0);
|
|
iter->Next();
|
|
ASSERT_FALSE(iter->Valid());
|
|
|
|
ASSERT_OK(Put("c", "d"));
|
|
|
|
iter->Seek(Slice("a"));
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().compare(Slice("x")), 0);
|
|
iter->Next();
|
|
ASSERT_FALSE(iter->Valid());
|
|
|
|
Status s;
|
|
s = iter->Refresh();
|
|
ASSERT_TRUE(s.IsNotSupported());
|
|
db_->ReleaseSnapshot(snapshot);
|
|
delete iter;
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, CreationFailure) {
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
"DBImpl::NewInternalIterator:StatusCallback", [](void* arg) {
|
|
*(reinterpret_cast<Status*>(arg)) = Status::Corruption("test status");
|
|
});
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
Iterator* iter = NewIterator(ReadOptions());
|
|
ASSERT_FALSE(iter->Valid());
|
|
ASSERT_TRUE(iter->status().IsCorruption());
|
|
delete iter;
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, UpperBoundWithChangeDirection) {
|
|
Options options = CurrentOptions();
|
|
options.max_sequential_skip_in_iterations = 3;
|
|
DestroyAndReopen(options);
|
|
|
|
// write a bunch of kvs to the database.
|
|
ASSERT_OK(Put("a", "1"));
|
|
ASSERT_OK(Put("y", "1"));
|
|
ASSERT_OK(Put("y1", "1"));
|
|
ASSERT_OK(Put("y2", "1"));
|
|
ASSERT_OK(Put("y3", "1"));
|
|
ASSERT_OK(Put("z", "1"));
|
|
ASSERT_OK(Flush());
|
|
ASSERT_OK(Put("a", "1"));
|
|
ASSERT_OK(Put("z", "1"));
|
|
ASSERT_OK(Put("bar", "1"));
|
|
ASSERT_OK(Put("foo", "1"));
|
|
|
|
std::string upper_bound = "x";
|
|
Slice ub_slice(upper_bound);
|
|
ReadOptions ro;
|
|
ro.iterate_upper_bound = &ub_slice;
|
|
ro.max_skippable_internal_keys = 1000;
|
|
|
|
Iterator* iter = NewIterator(ro);
|
|
iter->Seek("foo");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ("foo", iter->key().ToString());
|
|
|
|
iter->Prev();
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_OK(iter->status());
|
|
ASSERT_EQ("bar", iter->key().ToString());
|
|
|
|
delete iter;
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, TableFilter) {
|
|
ASSERT_OK(Put("a", "1"));
|
|
dbfull()->Flush(FlushOptions());
|
|
ASSERT_OK(Put("b", "2"));
|
|
ASSERT_OK(Put("c", "3"));
|
|
dbfull()->Flush(FlushOptions());
|
|
ASSERT_OK(Put("d", "4"));
|
|
ASSERT_OK(Put("e", "5"));
|
|
ASSERT_OK(Put("f", "6"));
|
|
dbfull()->Flush(FlushOptions());
|
|
|
|
// Ensure the table_filter callback is called once for each table.
|
|
{
|
|
std::set<uint64_t> unseen{1, 2, 3};
|
|
ReadOptions opts;
|
|
opts.table_filter = [&](const TableProperties& props) {
|
|
auto it = unseen.find(props.num_entries);
|
|
if (it == unseen.end()) {
|
|
ADD_FAILURE() << "saw table properties with an unexpected "
|
|
<< props.num_entries << " entries";
|
|
} else {
|
|
unseen.erase(it);
|
|
}
|
|
return true;
|
|
};
|
|
auto iter = NewIterator(opts);
|
|
iter->SeekToFirst();
|
|
ASSERT_EQ(IterStatus(iter), "a->1");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "b->2");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "c->3");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "d->4");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "e->5");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "f->6");
|
|
iter->Next();
|
|
ASSERT_FALSE(iter->Valid());
|
|
ASSERT_TRUE(unseen.empty());
|
|
delete iter;
|
|
}
|
|
|
|
// Ensure returning false in the table_filter hides the keys from that table
|
|
// during iteration.
|
|
{
|
|
ReadOptions opts;
|
|
opts.table_filter = [](const TableProperties& props) {
|
|
return props.num_entries != 2;
|
|
};
|
|
auto iter = NewIterator(opts);
|
|
iter->SeekToFirst();
|
|
ASSERT_EQ(IterStatus(iter), "a->1");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "d->4");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "e->5");
|
|
iter->Next();
|
|
ASSERT_EQ(IterStatus(iter), "f->6");
|
|
iter->Next();
|
|
ASSERT_FALSE(iter->Valid());
|
|
delete iter;
|
|
}
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, UpperBoundWithPrevReseek) {
|
|
Options options = CurrentOptions();
|
|
options.max_sequential_skip_in_iterations = 3;
|
|
DestroyAndReopen(options);
|
|
|
|
// write a bunch of kvs to the database.
|
|
ASSERT_OK(Put("a", "1"));
|
|
ASSERT_OK(Put("y", "1"));
|
|
ASSERT_OK(Put("z", "1"));
|
|
ASSERT_OK(Flush());
|
|
ASSERT_OK(Put("a", "1"));
|
|
ASSERT_OK(Put("z", "1"));
|
|
ASSERT_OK(Put("bar", "1"));
|
|
ASSERT_OK(Put("foo", "1"));
|
|
ASSERT_OK(Put("foo", "2"));
|
|
|
|
ASSERT_OK(Put("foo", "3"));
|
|
ASSERT_OK(Put("foo", "4"));
|
|
ASSERT_OK(Put("foo", "5"));
|
|
const Snapshot* snapshot = db_->GetSnapshot();
|
|
ASSERT_OK(Put("foo", "6"));
|
|
|
|
std::string upper_bound = "x";
|
|
Slice ub_slice(upper_bound);
|
|
ReadOptions ro;
|
|
ro.snapshot = snapshot;
|
|
ro.iterate_upper_bound = &ub_slice;
|
|
|
|
Iterator* iter = NewIterator(ro);
|
|
iter->SeekForPrev("goo");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ("foo", iter->key().ToString());
|
|
iter->Prev();
|
|
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ("bar", iter->key().ToString());
|
|
|
|
delete iter;
|
|
db_->ReleaseSnapshot(snapshot);
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, SkipStatistics) {
|
|
Options options = CurrentOptions();
|
|
options.statistics = rocksdb::CreateDBStatistics();
|
|
DestroyAndReopen(options);
|
|
|
|
int skip_count = 0;
|
|
|
|
// write a bunch of kvs to the database.
|
|
ASSERT_OK(Put("a", "1"));
|
|
ASSERT_OK(Put("b", "1"));
|
|
ASSERT_OK(Put("c", "1"));
|
|
ASSERT_OK(Flush());
|
|
ASSERT_OK(Put("d", "1"));
|
|
ASSERT_OK(Put("e", "1"));
|
|
ASSERT_OK(Put("f", "1"));
|
|
ASSERT_OK(Put("a", "2"));
|
|
ASSERT_OK(Put("b", "2"));
|
|
ASSERT_OK(Flush());
|
|
ASSERT_OK(Delete("d"));
|
|
ASSERT_OK(Delete("e"));
|
|
ASSERT_OK(Delete("f"));
|
|
|
|
Iterator* iter = NewIterator(ReadOptions());
|
|
int count = 0;
|
|
for (iter->SeekToFirst(); iter->Valid(); iter->Next()) {
|
|
ASSERT_OK(iter->status());
|
|
count++;
|
|
}
|
|
ASSERT_EQ(count, 3);
|
|
delete iter;
|
|
skip_count += 8; // 3 deletes + 3 original keys + 2 lower in sequence
|
|
ASSERT_EQ(skip_count, TestGetTickerCount(options, NUMBER_ITER_SKIP));
|
|
|
|
iter = NewIterator(ReadOptions());
|
|
count = 0;
|
|
for (iter->SeekToLast(); iter->Valid(); iter->Prev()) {
|
|
ASSERT_OK(iter->status());
|
|
count++;
|
|
}
|
|
ASSERT_EQ(count, 3);
|
|
delete iter;
|
|
skip_count += 8; // Same as above, but in reverse order
|
|
ASSERT_EQ(skip_count, TestGetTickerCount(options, NUMBER_ITER_SKIP));
|
|
|
|
ASSERT_OK(Put("aa", "1"));
|
|
ASSERT_OK(Put("ab", "1"));
|
|
ASSERT_OK(Put("ac", "1"));
|
|
ASSERT_OK(Put("ad", "1"));
|
|
ASSERT_OK(Flush());
|
|
ASSERT_OK(Delete("ab"));
|
|
ASSERT_OK(Delete("ac"));
|
|
ASSERT_OK(Delete("ad"));
|
|
|
|
ReadOptions ro;
|
|
Slice prefix("b");
|
|
ro.iterate_upper_bound = &prefix;
|
|
|
|
iter = NewIterator(ro);
|
|
count = 0;
|
|
for(iter->Seek("aa"); iter->Valid(); iter->Next()) {
|
|
ASSERT_OK(iter->status());
|
|
count++;
|
|
}
|
|
ASSERT_EQ(count, 1);
|
|
delete iter;
|
|
skip_count += 6; // 3 deletes + 3 original keys
|
|
ASSERT_EQ(skip_count, TestGetTickerCount(options, NUMBER_ITER_SKIP));
|
|
|
|
iter = NewIterator(ro);
|
|
count = 0;
|
|
for(iter->SeekToLast(); iter->Valid(); iter->Prev()) {
|
|
ASSERT_OK(iter->status());
|
|
count++;
|
|
}
|
|
ASSERT_EQ(count, 2);
|
|
delete iter;
|
|
// 3 deletes + 3 original keys + lower sequence of "a"
|
|
skip_count += 7;
|
|
ASSERT_EQ(skip_count, TestGetTickerCount(options, NUMBER_ITER_SKIP));
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, SeekAfterHittingManyInternalKeys) {
|
|
Options options = CurrentOptions();
|
|
DestroyAndReopen(options);
|
|
ReadOptions ropts;
|
|
ropts.max_skippable_internal_keys = 2;
|
|
|
|
Put("1", "val_1");
|
|
// Add more tombstones than max_skippable_internal_keys so that Next() fails.
|
|
Delete("2");
|
|
Delete("3");
|
|
Delete("4");
|
|
Delete("5");
|
|
Put("6", "val_6");
|
|
|
|
std::unique_ptr<Iterator> iter(NewIterator(ropts));
|
|
iter->SeekToFirst();
|
|
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(iter->key().ToString(), "1");
|
|
ASSERT_EQ(iter->value().ToString(), "val_1");
|
|
|
|
// This should fail as incomplete due to too many non-visible internal keys on
|
|
// the way to the next valid user key.
|
|
iter->Next();
|
|
ASSERT_TRUE(!iter->Valid());
|
|
ASSERT_TRUE(iter->status().IsIncomplete());
|
|
|
|
// Get the internal key at which Next() failed.
|
|
std::string prop_value;
|
|
ASSERT_OK(iter->GetProperty("rocksdb.iterator.internal-key", &prop_value));
|
|
ASSERT_EQ("4", prop_value);
|
|
|
|
// Create a new iterator to seek to the internal key.
|
|
std::unique_ptr<Iterator> iter2(NewIterator(ropts));
|
|
iter2->Seek(prop_value);
|
|
ASSERT_TRUE(iter2->Valid());
|
|
ASSERT_OK(iter2->status());
|
|
|
|
ASSERT_EQ(iter2->key().ToString(), "6");
|
|
ASSERT_EQ(iter2->value().ToString(), "val_6");
|
|
}
|
|
|
|
// Reproduces a former bug where iterator would skip some records when DBIter
|
|
// re-seeks subiterator with Incomplete status.
|
|
TEST_P(DBIteratorTest, NonBlockingIterationBugRepro) {
|
|
Options options = CurrentOptions();
|
|
BlockBasedTableOptions table_options;
|
|
// Make sure the sst file has more than one block.
|
|
table_options.flush_block_policy_factory =
|
|
std::make_shared<FlushBlockEveryKeyPolicyFactory>();
|
|
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
|
|
DestroyAndReopen(options);
|
|
|
|
// Two records in sst file, each in its own block.
|
|
Put("b", "");
|
|
Put("d", "");
|
|
Flush();
|
|
|
|
// Create a nonblocking iterator before writing to memtable.
|
|
ReadOptions ropt;
|
|
ropt.read_tier = kBlockCacheTier;
|
|
std::unique_ptr<Iterator> iter(NewIterator(ropt));
|
|
|
|
// Overwrite a key in memtable many times to hit
|
|
// max_sequential_skip_in_iterations (which is 8 by default).
|
|
for (int i = 0; i < 20; ++i) {
|
|
Put("c", "");
|
|
}
|
|
|
|
// Load the second block in sst file into the block cache.
|
|
{
|
|
std::unique_ptr<Iterator> iter2(NewIterator(ReadOptions()));
|
|
iter2->Seek("d");
|
|
}
|
|
|
|
// Finally seek the nonblocking iterator.
|
|
iter->Seek("a");
|
|
// With the bug, the status used to be OK, and the iterator used to point to
|
|
// "d".
|
|
EXPECT_TRUE(iter->status().IsIncomplete());
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, SeekBackwardAfterOutOfUpperBound) {
|
|
Put("a", "");
|
|
Put("b", "");
|
|
Flush();
|
|
|
|
ReadOptions ropt;
|
|
Slice ub = "b";
|
|
ropt.iterate_upper_bound = &ub;
|
|
|
|
std::unique_ptr<Iterator> it(dbfull()->NewIterator(ropt));
|
|
it->SeekForPrev("a");
|
|
ASSERT_TRUE(it->Valid());
|
|
ASSERT_OK(it->status());
|
|
ASSERT_EQ("a", it->key().ToString());
|
|
it->Next();
|
|
ASSERT_FALSE(it->Valid());
|
|
ASSERT_OK(it->status());
|
|
it->SeekForPrev("a");
|
|
ASSERT_OK(it->status());
|
|
|
|
ASSERT_TRUE(it->Valid());
|
|
ASSERT_EQ("a", it->key().ToString());
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, AvoidReseekLevelIterator) {
|
|
Options options = CurrentOptions();
|
|
options.compression = CompressionType::kNoCompression;
|
|
BlockBasedTableOptions table_options;
|
|
table_options.block_size = 800;
|
|
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
|
|
Reopen(options);
|
|
|
|
Random rnd(301);
|
|
std::string random_str = RandomString(&rnd, 180);
|
|
|
|
ASSERT_OK(Put("1", random_str));
|
|
ASSERT_OK(Put("2", random_str));
|
|
ASSERT_OK(Put("3", random_str));
|
|
ASSERT_OK(Put("4", random_str));
|
|
// A new block
|
|
ASSERT_OK(Put("5", random_str));
|
|
ASSERT_OK(Put("6", random_str));
|
|
ASSERT_OK(Put("7", random_str));
|
|
ASSERT_OK(Flush());
|
|
ASSERT_OK(Put("8", random_str));
|
|
ASSERT_OK(Put("9", random_str));
|
|
ASSERT_OK(Flush());
|
|
ASSERT_OK(db_->CompactRange(CompactRangeOptions(), nullptr, nullptr));
|
|
|
|
int num_find_file_in_level = 0;
|
|
int num_idx_blk_seek = 0;
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
"LevelIterator::Seek:BeforeFindFile",
|
|
[&](void* /*arg*/) { num_find_file_in_level++; });
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
"IndexBlockIter::Seek:0", [&](void* /*arg*/) { num_idx_blk_seek++; });
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
|
|
{
|
|
std::unique_ptr<Iterator> iter(NewIterator(ReadOptions()));
|
|
iter->Seek("1");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(1, num_find_file_in_level);
|
|
ASSERT_EQ(1, num_idx_blk_seek);
|
|
|
|
iter->Seek("2");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(1, num_find_file_in_level);
|
|
ASSERT_EQ(1, num_idx_blk_seek);
|
|
|
|
iter->Seek("3");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(1, num_find_file_in_level);
|
|
ASSERT_EQ(1, num_idx_blk_seek);
|
|
|
|
iter->Next();
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(1, num_find_file_in_level);
|
|
ASSERT_EQ(1, num_idx_blk_seek);
|
|
|
|
iter->Seek("5");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(1, num_find_file_in_level);
|
|
ASSERT_EQ(2, num_idx_blk_seek);
|
|
|
|
iter->Seek("6");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(1, num_find_file_in_level);
|
|
ASSERT_EQ(2, num_idx_blk_seek);
|
|
|
|
iter->Seek("7");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(1, num_find_file_in_level);
|
|
ASSERT_EQ(3, num_idx_blk_seek);
|
|
|
|
iter->Seek("8");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(2, num_find_file_in_level);
|
|
// Still re-seek because "8" is the boundary key, which has
|
|
// the same user key as the seek key.
|
|
ASSERT_EQ(4, num_idx_blk_seek);
|
|
|
|
iter->Seek("5");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(3, num_find_file_in_level);
|
|
ASSERT_EQ(5, num_idx_blk_seek);
|
|
|
|
iter->Next();
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(3, num_find_file_in_level);
|
|
ASSERT_EQ(5, num_idx_blk_seek);
|
|
|
|
// Seek backward never triggers the index block seek to be skipped
|
|
iter->Seek("5");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(3, num_find_file_in_level);
|
|
ASSERT_EQ(6, num_idx_blk_seek);
|
|
}
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
}
|
|
|
|
TEST_P(DBIteratorTest, AvoidReseekChildIterator) {
|
|
Options options = CurrentOptions();
|
|
options.compression = CompressionType::kNoCompression;
|
|
BlockBasedTableOptions table_options;
|
|
table_options.block_size = 800;
|
|
options.table_factory.reset(NewBlockBasedTableFactory(table_options));
|
|
Reopen(options);
|
|
|
|
Random rnd(301);
|
|
std::string random_str = RandomString(&rnd, 180);
|
|
|
|
ASSERT_OK(Put("1", random_str));
|
|
ASSERT_OK(Put("2", random_str));
|
|
ASSERT_OK(Put("3", random_str));
|
|
ASSERT_OK(Put("4", random_str));
|
|
ASSERT_OK(Put("8", random_str));
|
|
ASSERT_OK(Put("9", random_str));
|
|
ASSERT_OK(Flush());
|
|
ASSERT_OK(Put("5", random_str));
|
|
ASSERT_OK(Put("6", random_str));
|
|
ASSERT_OK(Put("7", random_str));
|
|
ASSERT_OK(Flush());
|
|
|
|
// These two keys will be kept in memtable.
|
|
ASSERT_OK(Put("0", random_str));
|
|
ASSERT_OK(Put("8", random_str));
|
|
|
|
int num_iter_wrapper_seek = 0;
|
|
SyncPoint::GetInstance()->SetCallBack(
|
|
"IteratorWrapper::Seek:0",
|
|
[&](void* /*arg*/) { num_iter_wrapper_seek++; });
|
|
SyncPoint::GetInstance()->EnableProcessing();
|
|
{
|
|
std::unique_ptr<Iterator> iter(NewIterator(ReadOptions()));
|
|
iter->Seek("1");
|
|
ASSERT_TRUE(iter->Valid());
|
|
// DBIter always wraps internal iterator with IteratorWrapper,
|
|
// and in merging iterator each child iterator will be wrapped
|
|
// with IteratorWrapper.
|
|
ASSERT_EQ(4, num_iter_wrapper_seek);
|
|
|
|
// child position: 1 and 5
|
|
num_iter_wrapper_seek = 0;
|
|
iter->Seek("2");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(3, num_iter_wrapper_seek);
|
|
|
|
// child position: 2 and 5
|
|
num_iter_wrapper_seek = 0;
|
|
iter->Seek("6");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(4, num_iter_wrapper_seek);
|
|
|
|
// child position: 8 and 6
|
|
num_iter_wrapper_seek = 0;
|
|
iter->Seek("7");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(3, num_iter_wrapper_seek);
|
|
|
|
// child position: 8 and 7
|
|
num_iter_wrapper_seek = 0;
|
|
iter->Seek("5");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_EQ(4, num_iter_wrapper_seek);
|
|
}
|
|
|
|
SyncPoint::GetInstance()->DisableProcessing();
|
|
}
|
|
|
|
INSTANTIATE_TEST_CASE_P(DBIteratorTestInstance, DBIteratorTest,
|
|
testing::Values(true, false));
|
|
|
|
// Tests how DBIter work with ReadCallback
|
|
class DBIteratorWithReadCallbackTest : public DBIteratorTest {};
|
|
|
|
TEST_F(DBIteratorWithReadCallbackTest, ReadCallback) {
|
|
class TestReadCallback : public ReadCallback {
|
|
public:
|
|
explicit TestReadCallback(SequenceNumber _max_visible_seq)
|
|
: ReadCallback(_max_visible_seq) {}
|
|
|
|
bool IsVisibleFullCheck(SequenceNumber seq) override {
|
|
return seq <= max_visible_seq_;
|
|
}
|
|
};
|
|
|
|
ASSERT_OK(Put("foo", "v1"));
|
|
ASSERT_OK(Put("foo", "v2"));
|
|
ASSERT_OK(Put("foo", "v3"));
|
|
ASSERT_OK(Put("a", "va"));
|
|
ASSERT_OK(Put("z", "vz"));
|
|
SequenceNumber seq1 = db_->GetLatestSequenceNumber();
|
|
TestReadCallback callback1(seq1);
|
|
ASSERT_OK(Put("foo", "v4"));
|
|
ASSERT_OK(Put("foo", "v5"));
|
|
ASSERT_OK(Put("bar", "v7"));
|
|
|
|
SequenceNumber seq2 = db_->GetLatestSequenceNumber();
|
|
auto* cfd =
|
|
reinterpret_cast<ColumnFamilyHandleImpl*>(db_->DefaultColumnFamily())
|
|
->cfd();
|
|
// The iterator are suppose to see data before seq1.
|
|
Iterator* iter =
|
|
dbfull()->NewIteratorImpl(ReadOptions(), cfd, seq2, &callback1);
|
|
|
|
// Seek
|
|
// The latest value of "foo" before seq1 is "v3"
|
|
iter->Seek("foo");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_OK(iter->status());
|
|
ASSERT_EQ("foo", iter->key());
|
|
ASSERT_EQ("v3", iter->value());
|
|
// "bar" is not visible to the iterator. It will move on to the next key
|
|
// "foo".
|
|
iter->Seek("bar");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_OK(iter->status());
|
|
ASSERT_EQ("foo", iter->key());
|
|
ASSERT_EQ("v3", iter->value());
|
|
|
|
// Next
|
|
// Seek to "a"
|
|
iter->Seek("a");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_OK(iter->status());
|
|
ASSERT_EQ("va", iter->value());
|
|
// "bar" is not visible to the iterator. It will move on to the next key
|
|
// "foo".
|
|
iter->Next();
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_OK(iter->status());
|
|
ASSERT_EQ("foo", iter->key());
|
|
ASSERT_EQ("v3", iter->value());
|
|
|
|
// Prev
|
|
// Seek to "z"
|
|
iter->Seek("z");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_OK(iter->status());
|
|
ASSERT_EQ("vz", iter->value());
|
|
// The previous key is "foo", which is visible to the iterator.
|
|
iter->Prev();
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_OK(iter->status());
|
|
ASSERT_EQ("foo", iter->key());
|
|
ASSERT_EQ("v3", iter->value());
|
|
// "bar" is not visible to the iterator. It will move on to the next key "a".
|
|
iter->Prev(); // skipping "bar"
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_OK(iter->status());
|
|
ASSERT_EQ("a", iter->key());
|
|
ASSERT_EQ("va", iter->value());
|
|
|
|
// SeekForPrev
|
|
// The previous key is "foo", which is visible to the iterator.
|
|
iter->SeekForPrev("y");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_OK(iter->status());
|
|
ASSERT_EQ("foo", iter->key());
|
|
ASSERT_EQ("v3", iter->value());
|
|
// "bar" is not visible to the iterator. It will move on to the next key "a".
|
|
iter->SeekForPrev("bar");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_OK(iter->status());
|
|
ASSERT_EQ("a", iter->key());
|
|
ASSERT_EQ("va", iter->value());
|
|
|
|
delete iter;
|
|
|
|
// Prev beyond max_sequential_skip_in_iterations
|
|
uint64_t num_versions =
|
|
CurrentOptions().max_sequential_skip_in_iterations + 10;
|
|
for (uint64_t i = 0; i < num_versions; i++) {
|
|
ASSERT_OK(Put("bar", ToString(i)));
|
|
}
|
|
SequenceNumber seq3 = db_->GetLatestSequenceNumber();
|
|
TestReadCallback callback2(seq3);
|
|
ASSERT_OK(Put("bar", "v8"));
|
|
SequenceNumber seq4 = db_->GetLatestSequenceNumber();
|
|
|
|
// The iterator is suppose to see data before seq3.
|
|
iter = dbfull()->NewIteratorImpl(ReadOptions(), cfd, seq4, &callback2);
|
|
// Seek to "z", which is visible.
|
|
iter->Seek("z");
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_OK(iter->status());
|
|
ASSERT_EQ("vz", iter->value());
|
|
// Previous key is "foo" and the last value "v5" is visible.
|
|
iter->Prev();
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_OK(iter->status());
|
|
ASSERT_EQ("foo", iter->key());
|
|
ASSERT_EQ("v5", iter->value());
|
|
// Since the number of values of "bar" is more than
|
|
// max_sequential_skip_in_iterations, Prev() will ultimately fallback to
|
|
// seek in forward direction. Here we test the fallback seek is correct.
|
|
// The last visible value should be (num_versions - 1), as "v8" is not
|
|
// visible.
|
|
iter->Prev();
|
|
ASSERT_TRUE(iter->Valid());
|
|
ASSERT_OK(iter->status());
|
|
ASSERT_EQ("bar", iter->key());
|
|
ASSERT_EQ(ToString(num_versions - 1), iter->value());
|
|
|
|
delete iter;
|
|
}
|
|
|
|
} // namespace rocksdb
|
|
|
|
int main(int argc, char** argv) {
|
|
rocksdb::port::InstallStackTraceHandler();
|
|
::testing::InitGoogleTest(&argc, argv);
|
|
return RUN_ALL_TESTS();
|
|
}
|