rocksdb/cache/lru_cache.cc
Peter Dillinger 311a544c2a Use deleters to label cache entries and collect stats (#8297)
Summary:
This change gathers and publishes statistics about the
kinds of items in block cache. This is especially important for
profiling relative usage of cache by index vs. filter vs. data blocks.
It works by iterating over the cache during periodic stats dump
(InternalStats, stats_dump_period_sec) or on demand when
DB::Get(Map)Property(kBlockCacheEntryStats), except that for
efficiency and sharing among column families, saved data from
the last scan is used when the data is not considered too old.

The new information can be seen in info LOG, for example:

    Block cache LRUCache@0x7fca62229330 capacity: 95.37 MB collections: 8 last_copies: 0 last_secs: 0.00178 secs_since: 0
    Block cache entry stats(count,size,portion): DataBlock(7092,28.24 MB,29.6136%) FilterBlock(215,867.90 KB,0.888728%) FilterMetaBlock(2,5.31 KB,0.00544%) IndexBlock(217,180.11 KB,0.184432%) WriteBuffer(1,256.00 KB,0.262144%) Misc(1,0.00 KB,0%)

And also through DB::GetProperty and GetMapProperty (here using
ldb just for demonstration):

    $ ./ldb --db=/dev/shm/dbbench/ get_property rocksdb.block-cache-entry-stats
    rocksdb.block-cache-entry-stats.bytes.data-block: 0
    rocksdb.block-cache-entry-stats.bytes.deprecated-filter-block: 0
    rocksdb.block-cache-entry-stats.bytes.filter-block: 0
    rocksdb.block-cache-entry-stats.bytes.filter-meta-block: 0
    rocksdb.block-cache-entry-stats.bytes.index-block: 178992
    rocksdb.block-cache-entry-stats.bytes.misc: 0
    rocksdb.block-cache-entry-stats.bytes.other-block: 0
    rocksdb.block-cache-entry-stats.bytes.write-buffer: 0
    rocksdb.block-cache-entry-stats.capacity: 8388608
    rocksdb.block-cache-entry-stats.count.data-block: 0
    rocksdb.block-cache-entry-stats.count.deprecated-filter-block: 0
    rocksdb.block-cache-entry-stats.count.filter-block: 0
    rocksdb.block-cache-entry-stats.count.filter-meta-block: 0
    rocksdb.block-cache-entry-stats.count.index-block: 215
    rocksdb.block-cache-entry-stats.count.misc: 1
    rocksdb.block-cache-entry-stats.count.other-block: 0
    rocksdb.block-cache-entry-stats.count.write-buffer: 0
    rocksdb.block-cache-entry-stats.id: LRUCache@0x7f3636661290
    rocksdb.block-cache-entry-stats.percent.data-block: 0.000000
    rocksdb.block-cache-entry-stats.percent.deprecated-filter-block: 0.000000
    rocksdb.block-cache-entry-stats.percent.filter-block: 0.000000
    rocksdb.block-cache-entry-stats.percent.filter-meta-block: 0.000000
    rocksdb.block-cache-entry-stats.percent.index-block: 2.133751
    rocksdb.block-cache-entry-stats.percent.misc: 0.000000
    rocksdb.block-cache-entry-stats.percent.other-block: 0.000000
    rocksdb.block-cache-entry-stats.percent.write-buffer: 0.000000
    rocksdb.block-cache-entry-stats.secs_for_last_collection: 0.000052
    rocksdb.block-cache-entry-stats.secs_since_last_collection: 0

Solution detail - We need some way to flag what kind of blocks each
entry belongs to, preferably without changing the Cache API.
One of the complications is that Cache is a general interface that could
have other users that don't adhere to whichever convention we decide
on for keys and values. Or we would pay for an extra field in the Handle
that would only be used for this purpose.

This change uses a back-door approach, the deleter, to indicate the
"role" of a Cache entry (in addition to the value type, implicitly).
This has the added benefit of ensuring proper code origin whenever we
recognize a particular role for a cache entry; if the entry came from
some other part of the code, it will use an unrecognized deleter, which
we simply attribute to the "Misc" role.

An internal API makes for simple instantiation and automatic
registration of Cache deleters for a given value type and "role".

Another internal API, CacheEntryStatsCollector, solves the problem of
caching the results of a scan and sharing them, to ensure scans are
neither excessive nor redundant so as not to harm Cache performance.

Because code is added to BlocklikeTraits, it is pulled out of
block_based_table_reader.cc into its own file.

This is a reformulation of https://github.com/facebook/rocksdb/issues/8276, without the type checking option
(could still be added), and with actual stat gathering.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8297

Test Plan: manual testing with db_bench, and a couple of basic unit tests

Reviewed By: ltamasi

Differential Revision: D28488721

Pulled By: pdillinger

fbshipit-source-id: 472f524a9691b5afb107934be2d41d84f2b129fb
2021-05-19 16:51:13 -07:00

705 lines
22 KiB
C++

// Copyright (c) 2011-present, Facebook, Inc. All rights reserved.
// This source code is licensed under both the GPLv2 (found in the
// COPYING file in the root directory) and Apache 2.0 License
// (found in the LICENSE.Apache file in the root directory).
//
// Copyright (c) 2011 The LevelDB Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file. See the AUTHORS file for names of contributors.
#include "cache/lru_cache.h"
#include <cassert>
#include <cstdint>
#include <cstdio>
#include "util/mutexlock.h"
namespace ROCKSDB_NAMESPACE {
LRUHandleTable::LRUHandleTable(int max_upper_hash_bits)
: length_bits_(/* historical starting size*/ 4),
list_(new LRUHandle* [size_t{1} << length_bits_] {}),
elems_(0),
max_length_bits_(max_upper_hash_bits) {}
LRUHandleTable::~LRUHandleTable() {
ApplyToEntriesRange(
[](LRUHandle* h) {
if (!h->HasRefs()) {
h->Free();
}
},
0, uint32_t{1} << length_bits_);
}
LRUHandle* LRUHandleTable::Lookup(const Slice& key, uint32_t hash) {
return *FindPointer(key, hash);
}
LRUHandle* LRUHandleTable::Insert(LRUHandle* h) {
LRUHandle** ptr = FindPointer(h->key(), h->hash);
LRUHandle* old = *ptr;
h->next_hash = (old == nullptr ? nullptr : old->next_hash);
*ptr = h;
if (old == nullptr) {
++elems_;
if ((elems_ >> length_bits_) > 0) { // elems_ >= length
// Since each cache entry is fairly large, we aim for a small
// average linked list length (<= 1).
Resize();
}
}
return old;
}
LRUHandle* LRUHandleTable::Remove(const Slice& key, uint32_t hash) {
LRUHandle** ptr = FindPointer(key, hash);
LRUHandle* result = *ptr;
if (result != nullptr) {
*ptr = result->next_hash;
--elems_;
}
return result;
}
LRUHandle** LRUHandleTable::FindPointer(const Slice& key, uint32_t hash) {
LRUHandle** ptr = &list_[hash >> (32 - length_bits_)];
while (*ptr != nullptr && ((*ptr)->hash != hash || key != (*ptr)->key())) {
ptr = &(*ptr)->next_hash;
}
return ptr;
}
void LRUHandleTable::Resize() {
if (length_bits_ >= max_length_bits_) {
// Due to reaching limit of hash information, if we made the table
// bigger, we would allocate more addresses but only the same
// number would be used.
return;
}
if (length_bits_ >= 31) {
// Avoid undefined behavior shifting uint32_t by 32
return;
}
uint32_t old_length = uint32_t{1} << length_bits_;
int new_length_bits = length_bits_ + 1;
std::unique_ptr<LRUHandle* []> new_list {
new LRUHandle* [size_t{1} << new_length_bits] {}
};
uint32_t count = 0;
for (uint32_t i = 0; i < old_length; i++) {
LRUHandle* h = list_[i];
while (h != nullptr) {
LRUHandle* next = h->next_hash;
uint32_t hash = h->hash;
LRUHandle** ptr = &new_list[hash >> (32 - new_length_bits)];
h->next_hash = *ptr;
*ptr = h;
h = next;
count++;
}
}
assert(elems_ == count);
list_ = std::move(new_list);
length_bits_ = new_length_bits;
}
LRUCacheShard::LRUCacheShard(
size_t capacity, bool strict_capacity_limit, double high_pri_pool_ratio,
bool use_adaptive_mutex, CacheMetadataChargePolicy metadata_charge_policy,
int max_upper_hash_bits,
const std::shared_ptr<SecondaryCache>& secondary_cache)
: capacity_(0),
high_pri_pool_usage_(0),
strict_capacity_limit_(strict_capacity_limit),
high_pri_pool_ratio_(high_pri_pool_ratio),
high_pri_pool_capacity_(0),
table_(max_upper_hash_bits),
usage_(0),
lru_usage_(0),
mutex_(use_adaptive_mutex),
secondary_cache_(secondary_cache) {
set_metadata_charge_policy(metadata_charge_policy);
// Make empty circular linked list
lru_.next = &lru_;
lru_.prev = &lru_;
lru_low_pri_ = &lru_;
SetCapacity(capacity);
}
void LRUCacheShard::EraseUnRefEntries() {
autovector<LRUHandle*> last_reference_list;
{
MutexLock l(&mutex_);
while (lru_.next != &lru_) {
LRUHandle* old = lru_.next;
// LRU list contains only elements which can be evicted
assert(old->InCache() && !old->HasRefs());
LRU_Remove(old);
table_.Remove(old->key(), old->hash);
old->SetInCache(false);
size_t total_charge = old->CalcTotalCharge(metadata_charge_policy_);
assert(usage_ >= total_charge);
usage_ -= total_charge;
last_reference_list.push_back(old);
}
}
for (auto entry : last_reference_list) {
entry->Free();
}
}
void LRUCacheShard::ApplyToSomeEntries(
const std::function<void(const Slice& key, void* value, size_t charge,
DeleterFn deleter)>& callback,
uint32_t average_entries_per_lock, uint32_t* state) {
// The state is essentially going to be the starting hash, which works
// nicely even if we resize between calls because we use upper-most
// hash bits for table indexes.
MutexLock l(&mutex_);
uint32_t length_bits = table_.GetLengthBits();
uint32_t length = uint32_t{1} << length_bits;
assert(average_entries_per_lock > 0);
// Assuming we are called with same average_entries_per_lock repeatedly,
// this simplifies some logic (index_end will not overflow)
assert(average_entries_per_lock < length || *state == 0);
uint32_t index_begin = *state >> (32 - length_bits);
uint32_t index_end = index_begin + average_entries_per_lock;
if (index_end >= length) {
// Going to end
index_end = length;
*state = UINT32_MAX;
} else {
*state = index_end << (32 - length_bits);
}
table_.ApplyToEntriesRange(
[callback](LRUHandle* h) {
DeleterFn deleter = h->IsSecondaryCacheCompatible()
? h->info_.helper->del_cb
: h->info_.deleter;
callback(h->key(), h->value, h->charge, deleter);
},
index_begin, index_end);
}
void LRUCacheShard::TEST_GetLRUList(LRUHandle** lru, LRUHandle** lru_low_pri) {
MutexLock l(&mutex_);
*lru = &lru_;
*lru_low_pri = lru_low_pri_;
}
size_t LRUCacheShard::TEST_GetLRUSize() {
MutexLock l(&mutex_);
LRUHandle* lru_handle = lru_.next;
size_t lru_size = 0;
while (lru_handle != &lru_) {
lru_size++;
lru_handle = lru_handle->next;
}
return lru_size;
}
double LRUCacheShard::GetHighPriPoolRatio() {
MutexLock l(&mutex_);
return high_pri_pool_ratio_;
}
void LRUCacheShard::LRU_Remove(LRUHandle* e) {
assert(e->next != nullptr);
assert(e->prev != nullptr);
if (lru_low_pri_ == e) {
lru_low_pri_ = e->prev;
}
e->next->prev = e->prev;
e->prev->next = e->next;
e->prev = e->next = nullptr;
size_t total_charge = e->CalcTotalCharge(metadata_charge_policy_);
assert(lru_usage_ >= total_charge);
lru_usage_ -= total_charge;
if (e->InHighPriPool()) {
assert(high_pri_pool_usage_ >= total_charge);
high_pri_pool_usage_ -= total_charge;
}
}
void LRUCacheShard::LRU_Insert(LRUHandle* e) {
assert(e->next == nullptr);
assert(e->prev == nullptr);
size_t total_charge = e->CalcTotalCharge(metadata_charge_policy_);
if (high_pri_pool_ratio_ > 0 && (e->IsHighPri() || e->HasHit())) {
// Inset "e" to head of LRU list.
e->next = &lru_;
e->prev = lru_.prev;
e->prev->next = e;
e->next->prev = e;
e->SetInHighPriPool(true);
high_pri_pool_usage_ += total_charge;
MaintainPoolSize();
} else {
// Insert "e" to the head of low-pri pool. Note that when
// high_pri_pool_ratio is 0, head of low-pri pool is also head of LRU list.
e->next = lru_low_pri_->next;
e->prev = lru_low_pri_;
e->prev->next = e;
e->next->prev = e;
e->SetInHighPriPool(false);
lru_low_pri_ = e;
}
lru_usage_ += total_charge;
}
void LRUCacheShard::MaintainPoolSize() {
while (high_pri_pool_usage_ > high_pri_pool_capacity_) {
// Overflow last entry in high-pri pool to low-pri pool.
lru_low_pri_ = lru_low_pri_->next;
assert(lru_low_pri_ != &lru_);
lru_low_pri_->SetInHighPriPool(false);
size_t total_charge =
lru_low_pri_->CalcTotalCharge(metadata_charge_policy_);
assert(high_pri_pool_usage_ >= total_charge);
high_pri_pool_usage_ -= total_charge;
}
}
void LRUCacheShard::EvictFromLRU(size_t charge,
autovector<LRUHandle*>* deleted) {
while ((usage_ + charge) > capacity_ && lru_.next != &lru_) {
LRUHandle* old = lru_.next;
// LRU list contains only elements which can be evicted
assert(old->InCache() && !old->HasRefs());
LRU_Remove(old);
table_.Remove(old->key(), old->hash);
old->SetInCache(false);
size_t old_total_charge = old->CalcTotalCharge(metadata_charge_policy_);
assert(usage_ >= old_total_charge);
usage_ -= old_total_charge;
deleted->push_back(old);
}
}
void LRUCacheShard::SetCapacity(size_t capacity) {
autovector<LRUHandle*> last_reference_list;
{
MutexLock l(&mutex_);
capacity_ = capacity;
high_pri_pool_capacity_ = capacity_ * high_pri_pool_ratio_;
EvictFromLRU(0, &last_reference_list);
}
// Try to insert the evicted entries into tiered cache
// Free the entries outside of mutex for performance reasons
for (auto entry : last_reference_list) {
if (secondary_cache_ && entry->IsSecondaryCacheCompatible() &&
!entry->IsPromoted()) {
secondary_cache_->Insert(entry->key(), entry->value, entry->info_.helper)
.PermitUncheckedError();
}
entry->Free();
}
}
void LRUCacheShard::SetStrictCapacityLimit(bool strict_capacity_limit) {
MutexLock l(&mutex_);
strict_capacity_limit_ = strict_capacity_limit;
}
Status LRUCacheShard::InsertItem(LRUHandle* e, Cache::Handle** handle) {
Status s = Status::OK();
autovector<LRUHandle*> last_reference_list;
size_t total_charge = e->CalcTotalCharge(metadata_charge_policy_);
{
MutexLock l(&mutex_);
// Free the space following strict LRU policy until enough space
// is freed or the lru list is empty
EvictFromLRU(total_charge, &last_reference_list);
if ((usage_ + total_charge) > capacity_ &&
(strict_capacity_limit_ || handle == nullptr)) {
if (handle == nullptr) {
// Don't insert the entry but still return ok, as if the entry inserted
// into cache and get evicted immediately.
e->SetInCache(false);
last_reference_list.push_back(e);
} else {
delete[] reinterpret_cast<char*>(e);
*handle = nullptr;
s = Status::Incomplete("Insert failed due to LRU cache being full.");
}
} else {
// Insert into the cache. Note that the cache might get larger than its
// capacity if not enough space was freed up.
LRUHandle* old = table_.Insert(e);
usage_ += total_charge;
if (old != nullptr) {
s = Status::OkOverwritten();
assert(old->InCache());
old->SetInCache(false);
if (!old->HasRefs()) {
// old is on LRU because it's in cache and its reference count is 0
LRU_Remove(old);
size_t old_total_charge =
old->CalcTotalCharge(metadata_charge_policy_);
assert(usage_ >= old_total_charge);
usage_ -= old_total_charge;
last_reference_list.push_back(old);
}
}
if (handle == nullptr) {
LRU_Insert(e);
} else {
e->Ref();
*handle = reinterpret_cast<Cache::Handle*>(e);
}
}
}
// Try to insert the evicted entries into the secondary cache
// Free the entries here outside of mutex for performance reasons
for (auto entry : last_reference_list) {
if (secondary_cache_ && entry->IsSecondaryCacheCompatible() &&
!entry->IsPromoted()) {
secondary_cache_->Insert(entry->key(), entry->value, entry->info_.helper)
.PermitUncheckedError();
}
entry->Free();
}
return s;
}
Cache::Handle* LRUCacheShard::Lookup(
const Slice& key, uint32_t hash,
const ShardedCache::CacheItemHelper* helper,
const ShardedCache::CreateCallback& create_cb, Cache::Priority priority,
bool wait) {
LRUHandle* e = nullptr;
{
MutexLock l(&mutex_);
e = table_.Lookup(key, hash);
if (e != nullptr) {
assert(e->InCache());
if (!e->HasRefs()) {
// The entry is in LRU since it's in hash and has no external references
LRU_Remove(e);
}
e->Ref();
e->SetHit();
}
}
// If handle table lookup failed, then allocate a handle outside the
// mutex if we're going to lookup in the secondary cache
// Only support synchronous for now
// TODO: Support asynchronous lookup in secondary cache
if (!e && secondary_cache_ && helper && helper->saveto_cb && wait) {
// For objects from the secondary cache, we expect the caller to provide
// a way to create/delete the primary cache object. The only case where
// a deleter would not be required is for dummy entries inserted for
// accounting purposes, which we won't demote to the secondary cache
// anyway.
assert(create_cb && helper->del_cb);
std::unique_ptr<SecondaryCacheHandle> secondary_handle =
secondary_cache_->Lookup(key, create_cb, wait);
if (secondary_handle != nullptr) {
void* value = nullptr;
e = reinterpret_cast<LRUHandle*>(
new char[sizeof(LRUHandle) - 1 + key.size()]);
e->flags = 0;
e->SetPromoted(true);
e->SetSecondaryCacheCompatible(true);
e->info_.helper = helper;
e->key_length = key.size();
e->hash = hash;
e->refs = 0;
e->next = e->prev = nullptr;
e->SetInCache(true);
e->SetPriority(priority);
memcpy(e->key_data, key.data(), key.size());
value = secondary_handle->Value();
e->value = value;
e->charge = secondary_handle->Size();
// This call could nullify e if the cache is over capacity and
// strict_capacity_limit_ is true. In such a case, the caller will try
// to insert later, which might again fail, but its ok as this should
// not be common
// Being conservative here since there could be lookups that are
// actually ok to fail rather than succeed and bloat up the memory
// usage (preloading partitioned index blocks, for example).
Status s = InsertItem(e, reinterpret_cast<Cache::Handle**>(&e));
if (!s.ok()) {
assert(e == nullptr);
(*helper->del_cb)(key, value);
}
}
}
return reinterpret_cast<Cache::Handle*>(e);
}
bool LRUCacheShard::Ref(Cache::Handle* h) {
LRUHandle* e = reinterpret_cast<LRUHandle*>(h);
MutexLock l(&mutex_);
// To create another reference - entry must be already externally referenced
assert(e->HasRefs());
e->Ref();
return true;
}
void LRUCacheShard::SetHighPriorityPoolRatio(double high_pri_pool_ratio) {
MutexLock l(&mutex_);
high_pri_pool_ratio_ = high_pri_pool_ratio;
high_pri_pool_capacity_ = capacity_ * high_pri_pool_ratio_;
MaintainPoolSize();
}
bool LRUCacheShard::Release(Cache::Handle* handle, bool force_erase) {
if (handle == nullptr) {
return false;
}
LRUHandle* e = reinterpret_cast<LRUHandle*>(handle);
bool last_reference = false;
{
MutexLock l(&mutex_);
last_reference = e->Unref();
if (last_reference && e->InCache()) {
// The item is still in cache, and nobody else holds a reference to it
if (usage_ > capacity_ || force_erase) {
// The LRU list must be empty since the cache is full
assert(lru_.next == &lru_ || force_erase);
// Take this opportunity and remove the item
table_.Remove(e->key(), e->hash);
e->SetInCache(false);
} else {
// Put the item back on the LRU list, and don't free it
LRU_Insert(e);
last_reference = false;
}
}
if (last_reference) {
size_t total_charge = e->CalcTotalCharge(metadata_charge_policy_);
assert(usage_ >= total_charge);
usage_ -= total_charge;
}
}
// Free the entry here outside of mutex for performance reasons
if (last_reference) {
e->Free();
}
return last_reference;
}
Status LRUCacheShard::Insert(const Slice& key, uint32_t hash, void* value,
size_t charge,
void (*deleter)(const Slice& key, void* value),
const Cache::CacheItemHelper* helper,
Cache::Handle** handle, Cache::Priority priority) {
// Allocate the memory here outside of the mutex
// If the cache is full, we'll have to release it
// It shouldn't happen very often though.
LRUHandle* e = reinterpret_cast<LRUHandle*>(
new char[sizeof(LRUHandle) - 1 + key.size()]);
e->value = value;
e->flags = 0;
if (helper) {
e->SetSecondaryCacheCompatible(true);
e->info_.helper = helper;
} else {
e->info_.deleter = deleter;
}
e->charge = charge;
e->key_length = key.size();
e->hash = hash;
e->refs = 0;
e->next = e->prev = nullptr;
e->SetInCache(true);
e->SetPriority(priority);
memcpy(e->key_data, key.data(), key.size());
return InsertItem(e, handle);
}
void LRUCacheShard::Erase(const Slice& key, uint32_t hash) {
LRUHandle* e;
bool last_reference = false;
{
MutexLock l(&mutex_);
e = table_.Remove(key, hash);
if (e != nullptr) {
assert(e->InCache());
e->SetInCache(false);
if (!e->HasRefs()) {
// The entry is in LRU since it's in hash and has no external references
LRU_Remove(e);
size_t total_charge = e->CalcTotalCharge(metadata_charge_policy_);
assert(usage_ >= total_charge);
usage_ -= total_charge;
last_reference = true;
}
}
}
// Free the entry here outside of mutex for performance reasons
// last_reference will only be true if e != nullptr
if (last_reference) {
e->Free();
}
}
size_t LRUCacheShard::GetUsage() const {
MutexLock l(&mutex_);
return usage_;
}
size_t LRUCacheShard::GetPinnedUsage() const {
MutexLock l(&mutex_);
assert(usage_ >= lru_usage_);
return usage_ - lru_usage_;
}
std::string LRUCacheShard::GetPrintableOptions() const {
const int kBufferSize = 200;
char buffer[kBufferSize];
{
MutexLock l(&mutex_);
snprintf(buffer, kBufferSize, " high_pri_pool_ratio: %.3lf\n",
high_pri_pool_ratio_);
}
return std::string(buffer);
}
LRUCache::LRUCache(size_t capacity, int num_shard_bits,
bool strict_capacity_limit, double high_pri_pool_ratio,
std::shared_ptr<MemoryAllocator> allocator,
bool use_adaptive_mutex,
CacheMetadataChargePolicy metadata_charge_policy,
const std::shared_ptr<SecondaryCache>& secondary_cache)
: ShardedCache(capacity, num_shard_bits, strict_capacity_limit,
std::move(allocator)) {
num_shards_ = 1 << num_shard_bits;
shards_ = reinterpret_cast<LRUCacheShard*>(
port::cacheline_aligned_alloc(sizeof(LRUCacheShard) * num_shards_));
size_t per_shard = (capacity + (num_shards_ - 1)) / num_shards_;
for (int i = 0; i < num_shards_; i++) {
new (&shards_[i]) LRUCacheShard(
per_shard, strict_capacity_limit, high_pri_pool_ratio,
use_adaptive_mutex, metadata_charge_policy,
/* max_upper_hash_bits */ 32 - num_shard_bits, secondary_cache);
}
}
LRUCache::~LRUCache() {
if (shards_ != nullptr) {
assert(num_shards_ > 0);
for (int i = 0; i < num_shards_; i++) {
shards_[i].~LRUCacheShard();
}
port::cacheline_aligned_free(shards_);
}
}
CacheShard* LRUCache::GetShard(uint32_t shard) {
return reinterpret_cast<CacheShard*>(&shards_[shard]);
}
const CacheShard* LRUCache::GetShard(uint32_t shard) const {
return reinterpret_cast<CacheShard*>(&shards_[shard]);
}
void* LRUCache::Value(Handle* handle) {
return reinterpret_cast<const LRUHandle*>(handle)->value;
}
size_t LRUCache::GetCharge(Handle* handle) const {
return reinterpret_cast<const LRUHandle*>(handle)->charge;
}
Cache::DeleterFn LRUCache::GetDeleter(Handle* handle) const {
auto h = reinterpret_cast<const LRUHandle*>(handle);
if (h->IsSecondaryCacheCompatible()) {
return h->info_.helper->del_cb;
} else {
return h->info_.deleter;
}
}
uint32_t LRUCache::GetHash(Handle* handle) const {
return reinterpret_cast<const LRUHandle*>(handle)->hash;
}
void LRUCache::DisownData() {
// Do not drop data if compile with ASAN to suppress leak warning.
#ifndef MUST_FREE_HEAP_ALLOCATIONS
shards_ = nullptr;
num_shards_ = 0;
#endif
}
size_t LRUCache::TEST_GetLRUSize() {
size_t lru_size_of_all_shards = 0;
for (int i = 0; i < num_shards_; i++) {
lru_size_of_all_shards += shards_[i].TEST_GetLRUSize();
}
return lru_size_of_all_shards;
}
double LRUCache::GetHighPriPoolRatio() {
double result = 0.0;
if (num_shards_ > 0) {
result = shards_[0].GetHighPriPoolRatio();
}
return result;
}
std::shared_ptr<Cache> NewLRUCache(
size_t capacity, int num_shard_bits, bool strict_capacity_limit,
double high_pri_pool_ratio,
std::shared_ptr<MemoryAllocator> memory_allocator, bool use_adaptive_mutex,
CacheMetadataChargePolicy metadata_charge_policy,
const std::shared_ptr<SecondaryCache>& secondary_cache) {
if (num_shard_bits >= 20) {
return nullptr; // the cache cannot be sharded into too many fine pieces
}
if (high_pri_pool_ratio < 0.0 || high_pri_pool_ratio > 1.0) {
// invalid high_pri_pool_ratio
return nullptr;
}
if (num_shard_bits < 0) {
num_shard_bits = GetDefaultCacheShardBits(capacity);
}
return std::make_shared<LRUCache>(
capacity, num_shard_bits, strict_capacity_limit, high_pri_pool_ratio,
std::move(memory_allocator), use_adaptive_mutex, metadata_charge_policy,
secondary_cache);
}
std::shared_ptr<Cache> NewLRUCache(const LRUCacheOptions& cache_opts) {
return NewLRUCache(
cache_opts.capacity, cache_opts.num_shard_bits,
cache_opts.strict_capacity_limit, cache_opts.high_pri_pool_ratio,
cache_opts.memory_allocator, cache_opts.use_adaptive_mutex,
cache_opts.metadata_charge_policy, cache_opts.secondary_cache);
}
std::shared_ptr<Cache> NewLRUCache(
size_t capacity, int num_shard_bits, bool strict_capacity_limit,
double high_pri_pool_ratio,
std::shared_ptr<MemoryAllocator> memory_allocator, bool use_adaptive_mutex,
CacheMetadataChargePolicy metadata_charge_policy) {
return NewLRUCache(capacity, num_shard_bits, strict_capacity_limit,
high_pri_pool_ratio, memory_allocator, use_adaptive_mutex,
metadata_charge_policy, nullptr);
}
} // namespace ROCKSDB_NAMESPACE