Summary: MemTable::MultiGet was not considering range tombstones before querying Bloom filter. This means range tombstones would be skipped for keys (or prefixes) with no other entries in the memtable. This could cause old values for a key (in SST files) to still show up until the range tombstone covering it has been flushed. This is fixed by essentially disabling the memtable Bloom filter when there are any range tombstones. (This could be better optimized in the future, but good enough for now.) Did some other cleanup/optimization in the same code to (more than) offset the cost of checking on range tombstones in more cases. There is now notable improvement when memtable_whole_key_filtering and prefix_extractor are used together (unusual), and this makes MultiGet closer to the Get implementation. Pull Request resolved: https://github.com/facebook/rocksdb/pull/9453 Test Plan: new unit test added. Added memtable Bloom to crash test. Performance testing -------------------- Build WAL-only DB (recovers to memtable): ``` TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -benchmarks=fillrandom -num=1000000 -write_buffer_size=250000000 ``` Query test command, to maximize sensitivity to the changed code: ``` TEST_TMPDIR=/dev/shm/rocksdb ./db_bench -use_existing_db -readonly -benchmarks=multireadrandom -num=10000000 -write_buffer_size=250000000 -memtable_bloom_size_ratio=0.015 -multiread_batched -batch_size=24 -threads=8 -memtable_whole_key_filtering=$MWKF -prefix_size=$PXS ``` (Note -num here is 10x larger for mostly memtable misses) Before & after run simultaneously, average over 10 iterations per data point, ops/sec. MWKF=0 PXS=0 (Bloom disabled) Before: 5724844 After: 6722066 MWKF=0 PXS=7 (prefixes hardly unique; Bloom not useful) Before: 9981319 After: 10237990 MWKF=0 PXS=8 (prefixes unique; Bloom useful) Before: 12081715 After: 12117603 MWKF=1 PXS=0 (whole key Bloom useful) Before: 11944354 After: 12096085 MWKF=1 PXS=7 (whole key Bloom useful in new version; prefixes not useful in old version) Before: 9444299 After: 11826029 MWKF=1 PXS=7 (whole key Bloom useful in new version; prefixes useful in old version) Before: 11784465 After: 11778591 Only in this last case is the 'before' *slightly* faster, perhaps because hashing prefixes is slightly faster than hashing whole keys. Otherwise, 'after' is faster. Reviewed By: ajkr Differential Revision: D33805025 Pulled By: pdillinger fbshipit-source-id: 597523cae4f4eafdf6ae6bb2bc6cb46f83b017bf
750 lines
30 KiB
Python
750 lines
30 KiB
Python
#!/usr/bin/env python3
|
|
# Copyright (c) Facebook, Inc. and its affiliates. All Rights Reserved.
|
|
from __future__ import absolute_import, division, print_function, unicode_literals
|
|
|
|
import os
|
|
import sys
|
|
import time
|
|
import random
|
|
import re
|
|
import tempfile
|
|
import subprocess
|
|
import shutil
|
|
import argparse
|
|
|
|
# params overwrite priority:
|
|
# for default:
|
|
# default_params < {blackbox,whitebox}_default_params < args
|
|
# for simple:
|
|
# default_params < {blackbox,whitebox}_default_params <
|
|
# simple_default_params <
|
|
# {blackbox,whitebox}_simple_default_params < args
|
|
# for cf_consistency:
|
|
# default_params < {blackbox,whitebox}_default_params <
|
|
# cf_consistency_params < args
|
|
# for txn:
|
|
# default_params < {blackbox,whitebox}_default_params < txn_params < args
|
|
|
|
|
|
default_params = {
|
|
"acquire_snapshot_one_in": 10000,
|
|
"backup_max_size": 100 * 1024 * 1024,
|
|
# Consider larger number when backups considered more stable
|
|
"backup_one_in": 100000,
|
|
"batch_protection_bytes_per_key": lambda: random.choice([0, 8]),
|
|
"block_size": 16384,
|
|
"bloom_bits": lambda: random.choice([random.randint(0,19),
|
|
random.lognormvariate(2.3, 1.3)]),
|
|
"cache_index_and_filter_blocks": lambda: random.randint(0, 1),
|
|
"cache_size": 1048576,
|
|
"checkpoint_one_in": 1000000,
|
|
"compression_type": lambda: random.choice(
|
|
["none", "snappy", "zlib", "bzip2", "lz4", "lz4hc", "xpress", "zstd"]),
|
|
"bottommost_compression_type": lambda:
|
|
"disable" if random.randint(0, 1) == 0 else
|
|
random.choice(
|
|
["none", "snappy", "zlib", "bzip2", "lz4", "lz4hc", "xpress",
|
|
"zstd"]),
|
|
"checksum_type" : lambda: random.choice(["kCRC32c", "kxxHash", "kxxHash64", "kXXH3"]),
|
|
"compression_max_dict_bytes": lambda: 16384 * random.randint(0, 1),
|
|
"compression_zstd_max_train_bytes": lambda: 65536 * random.randint(0, 1),
|
|
# Disabled compression_parallel_threads as the feature is not stable
|
|
# lambda: random.choice([1] * 9 + [4])
|
|
"compression_parallel_threads": 1,
|
|
"compression_max_dict_buffer_bytes": lambda: (1 << random.randint(0, 40)) - 1,
|
|
"clear_column_family_one_in": 0,
|
|
"compact_files_one_in": 1000000,
|
|
"compact_range_one_in": 1000000,
|
|
"delpercent": 4,
|
|
"delrangepercent": 1,
|
|
"destroy_db_initially": 0,
|
|
"enable_pipelined_write": lambda: random.randint(0, 1),
|
|
"enable_compaction_filter": lambda: random.choice([0, 0, 0, 1]),
|
|
"expected_values_dir": lambda: setup_expected_values_dir(),
|
|
"fail_if_options_file_error": lambda: random.randint(0, 1),
|
|
"flush_one_in": 1000000,
|
|
"file_checksum_impl": lambda: random.choice(["none", "crc32c", "xxh64", "big"]),
|
|
"get_live_files_one_in": 1000000,
|
|
# Note: the following two are intentionally disabled as the corresponding
|
|
# APIs are not guaranteed to succeed.
|
|
"get_sorted_wal_files_one_in": 0,
|
|
"get_current_wal_file_one_in": 0,
|
|
# Temporarily disable hash index
|
|
"index_type": lambda: random.choice([0, 0, 0, 2, 2, 3]),
|
|
"iterpercent": 10,
|
|
"mark_for_compaction_one_file_in": lambda: 10 * random.randint(0, 1),
|
|
"max_background_compactions": 20,
|
|
"max_bytes_for_level_base": 10485760,
|
|
"max_key": 100000000,
|
|
"max_write_buffer_number": 3,
|
|
"mmap_read": lambda: random.randint(0, 1),
|
|
# Setting `nooverwritepercent > 0` is only possible because we do not vary
|
|
# the random seed, so the same keys are chosen by every run for disallowing
|
|
# overwrites.
|
|
"nooverwritepercent": 1,
|
|
"open_files": lambda : random.choice([-1, -1, 100, 500000]),
|
|
"optimize_filters_for_memory": lambda: random.randint(0, 1),
|
|
"partition_filters": lambda: random.randint(0, 1),
|
|
"partition_pinning": lambda: random.randint(0, 3),
|
|
"pause_background_one_in": 1000000,
|
|
"prefix_size" : -1,
|
|
"prefixpercent": 5,
|
|
"progress_reports": 0,
|
|
"readpercent": 45,
|
|
"recycle_log_file_num": lambda: random.randint(0, 1),
|
|
"snapshot_hold_ops": 100000,
|
|
"sst_file_manager_bytes_per_sec": lambda: random.choice([0, 104857600]),
|
|
"sst_file_manager_bytes_per_truncate": lambda: random.choice([0, 1048576]),
|
|
"long_running_snapshots": lambda: random.randint(0, 1),
|
|
"subcompactions": lambda: random.randint(1, 4),
|
|
"target_file_size_base": 2097152,
|
|
"target_file_size_multiplier": 2,
|
|
"test_batches_snapshots": lambda: random.randint(0, 1),
|
|
"top_level_index_pinning": lambda: random.randint(0, 3),
|
|
"unpartitioned_pinning": lambda: random.randint(0, 3),
|
|
"use_direct_reads": lambda: random.randint(0, 1),
|
|
"use_direct_io_for_flush_and_compaction": lambda: random.randint(0, 1),
|
|
"mock_direct_io": False,
|
|
"use_clock_cache": 0, # currently broken
|
|
"use_full_merge_v1": lambda: random.randint(0, 1),
|
|
"use_merge": lambda: random.randint(0, 1),
|
|
# 999 -> use Bloom API
|
|
"ribbon_starting_level": lambda: random.choice([random.randint(-1, 10), 999]),
|
|
"use_block_based_filter": lambda: random.randint(0, 1),
|
|
"verify_checksum": 1,
|
|
"write_buffer_size": 4 * 1024 * 1024,
|
|
"writepercent": 35,
|
|
"format_version": lambda: random.choice([2, 3, 4, 5, 5]),
|
|
"index_block_restart_interval": lambda: random.choice(range(1, 16)),
|
|
"use_multiget" : lambda: random.randint(0, 1),
|
|
"periodic_compaction_seconds" :
|
|
lambda: random.choice([0, 0, 1, 2, 10, 100, 1000]),
|
|
"compaction_ttl" : lambda: random.choice([0, 0, 1, 2, 10, 100, 1000]),
|
|
# Test small max_manifest_file_size in a smaller chance, as most of the
|
|
# time we wnat manifest history to be preserved to help debug
|
|
"max_manifest_file_size" : lambda : random.choice(
|
|
[t * 16384 if t < 3 else 1024 * 1024 * 1024 for t in range(1, 30)]),
|
|
# Sync mode might make test runs slower so running it in a smaller chance
|
|
"sync" : lambda : random.choice(
|
|
[1 if t == 0 else 0 for t in range(0, 20)]),
|
|
# Disable compation_readahead_size because the test is not passing.
|
|
#"compaction_readahead_size" : lambda : random.choice(
|
|
# [0, 0, 1024 * 1024]),
|
|
"db_write_buffer_size" : lambda: random.choice(
|
|
[0, 0, 0, 1024 * 1024, 8 * 1024 * 1024, 128 * 1024 * 1024]),
|
|
"avoid_unnecessary_blocking_io" : random.randint(0, 1),
|
|
"write_dbid_to_manifest" : random.randint(0, 1),
|
|
"avoid_flush_during_recovery" : random.choice(
|
|
[1 if t == 0 else 0 for t in range(0, 8)]),
|
|
"max_write_batch_group_size_bytes" : lambda: random.choice(
|
|
[16, 64, 1024 * 1024, 16 * 1024 * 1024]),
|
|
"level_compaction_dynamic_level_bytes" : True,
|
|
"verify_checksum_one_in": 1000000,
|
|
"verify_db_one_in": 100000,
|
|
"continuous_verification_interval" : 0,
|
|
"max_key_len": 3,
|
|
"key_len_percent_dist": "1,30,69",
|
|
"read_fault_one_in": lambda: random.choice([0, 32, 1000]),
|
|
"open_metadata_write_fault_one_in": lambda: random.choice([0, 0, 8]),
|
|
"open_write_fault_one_in": lambda: random.choice([0, 0, 16]),
|
|
"open_read_fault_one_in": lambda: random.choice([0, 0, 32]),
|
|
"sync_fault_injection": False,
|
|
"get_property_one_in": 1000000,
|
|
"paranoid_file_checks": lambda: random.choice([0, 1, 1, 1]),
|
|
"max_write_buffer_size_to_maintain": lambda: random.choice(
|
|
[0, 1024 * 1024, 2 * 1024 * 1024, 4 * 1024 * 1024, 8 * 1024 * 1024]),
|
|
"user_timestamp_size": 0,
|
|
"secondary_cache_fault_one_in" : lambda: random.choice([0, 0, 32]),
|
|
"prepopulate_block_cache" : lambda: random.choice([0, 1]),
|
|
"memtable_prefix_bloom_size_ratio": lambda: random.choice([0.001, 0.01, 0.1, 0.5]),
|
|
"memtable_whole_key_filtering": lambda: random.randint(0, 1),
|
|
}
|
|
|
|
_TEST_DIR_ENV_VAR = 'TEST_TMPDIR'
|
|
_DEBUG_LEVEL_ENV_VAR = 'DEBUG_LEVEL'
|
|
|
|
stress_cmd = "./db_stress"
|
|
|
|
def is_release_mode():
|
|
return os.environ.get(_DEBUG_LEVEL_ENV_VAR) == "0"
|
|
|
|
|
|
def get_dbname(test_name):
|
|
test_dir_name = "rocksdb_crashtest_" + test_name
|
|
test_tmpdir = os.environ.get(_TEST_DIR_ENV_VAR)
|
|
if test_tmpdir is None or test_tmpdir == "":
|
|
dbname = tempfile.mkdtemp(prefix=test_dir_name)
|
|
else:
|
|
dbname = test_tmpdir + "/" + test_dir_name
|
|
shutil.rmtree(dbname, True)
|
|
os.mkdir(dbname)
|
|
return dbname
|
|
|
|
expected_values_dir = None
|
|
def setup_expected_values_dir():
|
|
global expected_values_dir
|
|
if expected_values_dir is not None:
|
|
return expected_values_dir
|
|
expected_dir_prefix = "rocksdb_crashtest_expected_"
|
|
test_tmpdir = os.environ.get(_TEST_DIR_ENV_VAR)
|
|
if test_tmpdir is None or test_tmpdir == "":
|
|
expected_values_dir = tempfile.mkdtemp(
|
|
prefix=expected_dir_prefix)
|
|
else:
|
|
# if tmpdir is specified, store the expected_values_dir under that dir
|
|
expected_values_dir = test_tmpdir + "/rocksdb_crashtest_expected"
|
|
if os.path.exists(expected_values_dir):
|
|
shutil.rmtree(expected_values_dir)
|
|
os.mkdir(expected_values_dir)
|
|
return expected_values_dir
|
|
|
|
|
|
def is_direct_io_supported(dbname):
|
|
with tempfile.NamedTemporaryFile(dir=dbname) as f:
|
|
try:
|
|
os.open(f.name, os.O_DIRECT)
|
|
except BaseException:
|
|
return False
|
|
return True
|
|
|
|
|
|
blackbox_default_params = {
|
|
"disable_wal": lambda: random.choice([0, 0, 0, 1]),
|
|
# total time for this script to test db_stress
|
|
"duration": 6000,
|
|
# time for one db_stress instance to run
|
|
"interval": 120,
|
|
# since we will be killing anyway, use large value for ops_per_thread
|
|
"ops_per_thread": 100000000,
|
|
"reopen": 0,
|
|
"set_options_one_in": 10000,
|
|
}
|
|
|
|
whitebox_default_params = {
|
|
# TODO: enable this once we figure out how to adjust kill odds for WAL-
|
|
# disabled runs, and either (1) separate full `db_stress` runs out of
|
|
# whitebox crash or (2) support verification at end of `db_stress` runs
|
|
# that ran with WAL disabled.
|
|
"disable_wal": 0,
|
|
"duration": 10000,
|
|
"log2_keys_per_lock": 10,
|
|
"ops_per_thread": 200000,
|
|
"random_kill_odd": 888887,
|
|
"reopen": 20,
|
|
}
|
|
|
|
simple_default_params = {
|
|
"allow_concurrent_memtable_write": lambda: random.randint(0, 1),
|
|
"column_families": 1,
|
|
# TODO: re-enable once below loop succeeds for a while (a few minutes should
|
|
# suffice):
|
|
# `while rm -rf /dev/shm/single_stress && ./db_stress --clear_column_family_one_in=0 --column_families=1 --db=/dev/shm/single_stress --experimental_mempurge_threshold=5.493146827397074 --flush_one_in=10000 --reopen=0 --write_buffer_size=262144 --value_size_mult=33 --max_write_buffer_number=3 -ops_per_thread=10000; do : ; done`
|
|
"experimental_mempurge_threshold": 0,
|
|
"max_background_compactions": 1,
|
|
"max_bytes_for_level_base": 67108864,
|
|
"memtablerep": "skip_list",
|
|
"prefixpercent": 0,
|
|
"readpercent": 50,
|
|
"target_file_size_base": 16777216,
|
|
"target_file_size_multiplier": 1,
|
|
"test_batches_snapshots": 0,
|
|
"write_buffer_size": 32 * 1024 * 1024,
|
|
"level_compaction_dynamic_level_bytes": False,
|
|
"paranoid_file_checks": lambda: random.choice([0, 1, 1, 1]),
|
|
}
|
|
|
|
blackbox_simple_default_params = {
|
|
"open_files": -1,
|
|
"set_options_one_in": 0,
|
|
}
|
|
|
|
whitebox_simple_default_params = {}
|
|
|
|
cf_consistency_params = {
|
|
"disable_wal": lambda: random.randint(0, 1),
|
|
"reopen": 0,
|
|
"test_cf_consistency": 1,
|
|
# use small value for write_buffer_size so that RocksDB triggers flush
|
|
# more frequently
|
|
"write_buffer_size": 1024 * 1024,
|
|
"enable_pipelined_write": lambda: random.randint(0, 1),
|
|
# Snapshots are used heavily in this test mode, while they are incompatible
|
|
# with compaction filter.
|
|
"enable_compaction_filter": 0,
|
|
}
|
|
|
|
txn_params = {
|
|
"use_txn" : 1,
|
|
# Avoid lambda to set it once for the entire test
|
|
"txn_write_policy": random.randint(0, 2),
|
|
"unordered_write": random.randint(0, 1),
|
|
# TODO: there is such a thing as transactions with WAL disabled. We should
|
|
# cover that case.
|
|
"disable_wal": 0,
|
|
# OpenReadOnly after checkpoint is not currnetly compatible with WritePrepared txns
|
|
"checkpoint_one_in": 0,
|
|
# pipeline write is not currnetly compatible with WritePrepared txns
|
|
"enable_pipelined_write": 0,
|
|
}
|
|
|
|
best_efforts_recovery_params = {
|
|
"best_efforts_recovery": True,
|
|
"skip_verifydb": True,
|
|
"verify_db_one_in": 0,
|
|
"continuous_verification_interval": 0,
|
|
}
|
|
|
|
blob_params = {
|
|
"allow_setting_blob_options_dynamically": 1,
|
|
# Enable blob files and GC with a 75% chance initially; note that they might still be
|
|
# enabled/disabled during the test via SetOptions
|
|
"enable_blob_files": lambda: random.choice([0] + [1] * 3),
|
|
"min_blob_size": lambda: random.choice([0, 8, 16]),
|
|
"blob_file_size": lambda: random.choice([1048576, 16777216, 268435456, 1073741824]),
|
|
"blob_compression_type": lambda: random.choice(["none", "snappy", "lz4", "zstd"]),
|
|
"enable_blob_garbage_collection": lambda: random.choice([0] + [1] * 3),
|
|
"blob_garbage_collection_age_cutoff": lambda: random.choice([0.0, 0.25, 0.5, 0.75, 1.0]),
|
|
"blob_garbage_collection_force_threshold": lambda: random.choice([0.5, 0.75, 1.0]),
|
|
"blob_compaction_readahead_size": lambda: random.choice([0, 1048576, 4194304]),
|
|
}
|
|
|
|
ts_params = {
|
|
"test_cf_consistency": 0,
|
|
"test_batches_snapshots": 0,
|
|
"user_timestamp_size": 8,
|
|
"use_merge": 0,
|
|
"use_full_merge_v1": 0,
|
|
"use_txn": 0,
|
|
"read_only": 0,
|
|
"secondary_catch_up_one_in": 0,
|
|
"continuous_verification_interval": 0,
|
|
"checkpoint_one_in": 0,
|
|
"enable_blob_files": 0,
|
|
"use_blob_db": 0,
|
|
"enable_compaction_filter": 0,
|
|
"ingest_external_file_one_in": 0,
|
|
"use_block_based_filter": 0,
|
|
}
|
|
|
|
def finalize_and_sanitize(src_params):
|
|
dest_params = dict([(k, v() if callable(v) else v)
|
|
for (k, v) in src_params.items()])
|
|
if dest_params.get("compression_max_dict_bytes") == 0:
|
|
dest_params["compression_zstd_max_train_bytes"] = 0
|
|
dest_params["compression_max_dict_buffer_bytes"] = 0
|
|
if dest_params.get("compression_type") != "zstd":
|
|
dest_params["compression_zstd_max_train_bytes"] = 0
|
|
if dest_params.get("allow_concurrent_memtable_write", 1) == 1:
|
|
dest_params["memtablerep"] = "skip_list"
|
|
if dest_params["mmap_read"] == 1:
|
|
dest_params["use_direct_io_for_flush_and_compaction"] = 0
|
|
dest_params["use_direct_reads"] = 0
|
|
if (dest_params["use_direct_io_for_flush_and_compaction"] == 1
|
|
or dest_params["use_direct_reads"] == 1) and \
|
|
not is_direct_io_supported(dest_params["db"]):
|
|
if is_release_mode():
|
|
print("{} does not support direct IO. Disabling use_direct_reads and "
|
|
"use_direct_io_for_flush_and_compaction.\n".format(
|
|
dest_params["db"]))
|
|
dest_params["use_direct_reads"] = 0
|
|
dest_params["use_direct_io_for_flush_and_compaction"] = 0
|
|
else:
|
|
dest_params["mock_direct_io"] = True
|
|
|
|
# DeleteRange is not currnetly compatible with Txns and timestamp
|
|
if (dest_params.get("test_batches_snapshots") == 1 or
|
|
dest_params.get("use_txn") == 1 or
|
|
dest_params.get("user_timestamp_size") > 0):
|
|
dest_params["delpercent"] += dest_params["delrangepercent"]
|
|
dest_params["delrangepercent"] = 0
|
|
# Only under WritePrepared txns, unordered_write would provide the same guarnatees as vanilla rocksdb
|
|
if dest_params.get("unordered_write", 0) == 1:
|
|
dest_params["txn_write_policy"] = 1
|
|
dest_params["allow_concurrent_memtable_write"] = 1
|
|
if dest_params.get("disable_wal", 0) == 1:
|
|
dest_params["atomic_flush"] = 1
|
|
# The `DbStressCompactionFilter` can apply memtable updates to SST
|
|
# files, which would be problematic without WAL since such updates are
|
|
# expected to be lost in crash recoveries.
|
|
dest_params["enable_compaction_filter"] = 0
|
|
dest_params["sync"] = 0
|
|
dest_params["write_fault_one_in"] = 0
|
|
if dest_params.get("open_files", 1) != -1:
|
|
# Compaction TTL and periodic compactions are only compatible
|
|
# with open_files = -1
|
|
dest_params["compaction_ttl"] = 0
|
|
dest_params["periodic_compaction_seconds"] = 0
|
|
if dest_params.get("compaction_style", 0) == 2:
|
|
# Disable compaction TTL in FIFO compaction, because right
|
|
# now assertion failures are triggered.
|
|
dest_params["compaction_ttl"] = 0
|
|
dest_params["periodic_compaction_seconds"] = 0
|
|
if dest_params["partition_filters"] == 1:
|
|
if dest_params["index_type"] != 2:
|
|
dest_params["partition_filters"] = 0
|
|
else:
|
|
dest_params["use_block_based_filter"] = 0
|
|
if dest_params["ribbon_starting_level"] < 999:
|
|
dest_params["use_block_based_filter"] = 0
|
|
if dest_params.get("atomic_flush", 0) == 1:
|
|
# disable pipelined write when atomic flush is used.
|
|
dest_params["enable_pipelined_write"] = 0
|
|
if dest_params.get("sst_file_manager_bytes_per_sec", 0) == 0:
|
|
dest_params["sst_file_manager_bytes_per_truncate"] = 0
|
|
if dest_params.get("enable_compaction_filter", 0) == 1:
|
|
# Compaction filter is incompatible with snapshots. Need to avoid taking
|
|
# snapshots, as well as avoid operations that use snapshots for
|
|
# verification.
|
|
dest_params["acquire_snapshot_one_in"] = 0
|
|
dest_params["compact_range_one_in"] = 0
|
|
# Give the iterator ops away to reads.
|
|
dest_params["readpercent"] += dest_params.get("iterpercent", 10)
|
|
dest_params["iterpercent"] = 0
|
|
dest_params["test_batches_snapshots"] = 0
|
|
if dest_params.get("test_batches_snapshots") == 0:
|
|
dest_params["batch_protection_bytes_per_key"] = 0
|
|
if (dest_params.get("prefix_size") == -1 and
|
|
dest_params.get("memtable_whole_key_filtering") == 0):
|
|
dest_params["memtable_prefix_bloom_size_ratio"] = 0
|
|
return dest_params
|
|
|
|
def gen_cmd_params(args):
|
|
params = {}
|
|
|
|
params.update(default_params)
|
|
if args.test_type == 'blackbox':
|
|
params.update(blackbox_default_params)
|
|
if args.test_type == 'whitebox':
|
|
params.update(whitebox_default_params)
|
|
if args.simple:
|
|
params.update(simple_default_params)
|
|
if args.test_type == 'blackbox':
|
|
params.update(blackbox_simple_default_params)
|
|
if args.test_type == 'whitebox':
|
|
params.update(whitebox_simple_default_params)
|
|
if args.cf_consistency:
|
|
params.update(cf_consistency_params)
|
|
if args.txn:
|
|
params.update(txn_params)
|
|
if args.test_best_efforts_recovery:
|
|
params.update(best_efforts_recovery_params)
|
|
if args.enable_ts:
|
|
params.update(ts_params)
|
|
|
|
# Best-effort recovery and BlobDB are currently incompatible. Test BE recovery
|
|
# if specified on the command line; otherwise, apply BlobDB related overrides
|
|
# with a 10% chance.
|
|
if (not args.test_best_efforts_recovery and
|
|
not args.enable_ts and
|
|
random.choice([0] * 9 + [1]) == 1):
|
|
params.update(blob_params)
|
|
|
|
for k, v in vars(args).items():
|
|
if v is not None:
|
|
params[k] = v
|
|
return params
|
|
|
|
|
|
def gen_cmd(params, unknown_params):
|
|
finalzied_params = finalize_and_sanitize(params)
|
|
cmd = [stress_cmd] + [
|
|
'--{0}={1}'.format(k, v)
|
|
for k, v in [(k, finalzied_params[k]) for k in sorted(finalzied_params)]
|
|
if k not in set(['test_type', 'simple', 'duration', 'interval',
|
|
'random_kill_odd', 'cf_consistency', 'txn',
|
|
'test_best_efforts_recovery', 'enable_ts', 'stress_cmd'])
|
|
and v is not None] + unknown_params
|
|
return cmd
|
|
|
|
|
|
# Inject inconsistency to db directory.
|
|
def inject_inconsistencies_to_db_dir(dir_path):
|
|
files = os.listdir(dir_path)
|
|
file_num_rgx = re.compile(r'(?P<number>[0-9]{6})')
|
|
largest_fnum = 0
|
|
for f in files:
|
|
m = file_num_rgx.search(f)
|
|
if m and not f.startswith('LOG'):
|
|
largest_fnum = max(largest_fnum, int(m.group('number')))
|
|
|
|
candidates = [
|
|
f for f in files if re.search(r'[0-9]+\.sst', f)
|
|
]
|
|
deleted = 0
|
|
corrupted = 0
|
|
for f in candidates:
|
|
rnd = random.randint(0, 99)
|
|
f_path = os.path.join(dir_path, f)
|
|
if rnd < 10:
|
|
os.unlink(f_path)
|
|
deleted = deleted + 1
|
|
elif 10 <= rnd and rnd < 30:
|
|
with open(f_path, "a") as fd:
|
|
fd.write('12345678')
|
|
corrupted = corrupted + 1
|
|
print('Removed %d table files' % deleted)
|
|
print('Corrupted %d table files' % corrupted)
|
|
|
|
# Add corrupted MANIFEST and SST
|
|
for num in range(largest_fnum + 1, largest_fnum + 10):
|
|
rnd = random.randint(0, 1)
|
|
fname = ("MANIFEST-%06d" % num) if rnd == 0 else ("%06d.sst" % num)
|
|
print('Write %s' % fname)
|
|
with open(os.path.join(dir_path, fname), "w") as fd:
|
|
fd.write("garbage")
|
|
|
|
def execute_cmd(cmd, timeout):
|
|
child = subprocess.Popen(cmd, stderr=subprocess.PIPE,
|
|
stdout=subprocess.PIPE)
|
|
print("Running db_stress with pid=%d: %s\n\n"
|
|
% (child.pid, ' '.join(cmd)))
|
|
|
|
try:
|
|
outs, errs = child.communicate(timeout=timeout)
|
|
hit_timeout = False
|
|
print("WARNING: db_stress ended before kill: exitcode=%d\n"
|
|
% child.returncode)
|
|
except subprocess.TimeoutExpired:
|
|
hit_timeout = True
|
|
child.kill()
|
|
print("KILLED %d\n" % child.pid)
|
|
outs, errs = child.communicate()
|
|
|
|
return hit_timeout, child.returncode, outs.decode('utf-8'), errs.decode('utf-8')
|
|
|
|
|
|
# This script runs and kills db_stress multiple times. It checks consistency
|
|
# in case of unsafe crashes in RocksDB.
|
|
def blackbox_crash_main(args, unknown_args):
|
|
cmd_params = gen_cmd_params(args)
|
|
dbname = get_dbname('blackbox')
|
|
exit_time = time.time() + cmd_params['duration']
|
|
|
|
print("Running blackbox-crash-test with \n"
|
|
+ "interval_between_crash=" + str(cmd_params['interval']) + "\n"
|
|
+ "total-duration=" + str(cmd_params['duration']) + "\n")
|
|
|
|
while time.time() < exit_time:
|
|
cmd = gen_cmd(dict(
|
|
list(cmd_params.items())
|
|
+ list({'db': dbname}.items())), unknown_args)
|
|
|
|
hit_timeout, retcode, outs, errs = execute_cmd(cmd, cmd_params['interval'])
|
|
|
|
if not hit_timeout:
|
|
print('Exit Before Killing')
|
|
print('stdout:')
|
|
print(outs)
|
|
print('stderr:')
|
|
print(errs)
|
|
sys.exit(2)
|
|
|
|
for line in errs.split('\n'):
|
|
if line != '' and not line.startswith('WARNING'):
|
|
print('stderr has error message:')
|
|
print('***' + line + '***')
|
|
|
|
time.sleep(1) # time to stabilize before the next run
|
|
|
|
if args.test_best_efforts_recovery:
|
|
inject_inconsistencies_to_db_dir(dbname)
|
|
|
|
time.sleep(1) # time to stabilize before the next run
|
|
|
|
# we need to clean up after ourselves -- only do this on test success
|
|
shutil.rmtree(dbname, True)
|
|
|
|
|
|
# This python script runs db_stress multiple times. Some runs with
|
|
# kill_random_test that causes rocksdb to crash at various points in code.
|
|
def whitebox_crash_main(args, unknown_args):
|
|
cmd_params = gen_cmd_params(args)
|
|
dbname = get_dbname('whitebox')
|
|
|
|
cur_time = time.time()
|
|
exit_time = cur_time + cmd_params['duration']
|
|
half_time = cur_time + cmd_params['duration'] // 2
|
|
|
|
print("Running whitebox-crash-test with \n"
|
|
+ "total-duration=" + str(cmd_params['duration']) + "\n")
|
|
|
|
total_check_mode = 4
|
|
check_mode = 0
|
|
kill_random_test = cmd_params['random_kill_odd']
|
|
kill_mode = 0
|
|
|
|
while time.time() < exit_time:
|
|
if check_mode == 0:
|
|
additional_opts = {
|
|
# use large ops per thread since we will kill it anyway
|
|
"ops_per_thread": 100 * cmd_params['ops_per_thread'],
|
|
}
|
|
# run with kill_random_test, with three modes.
|
|
# Mode 0 covers all kill points. Mode 1 covers less kill points but
|
|
# increases change of triggering them. Mode 2 covers even less
|
|
# frequent kill points and further increases triggering change.
|
|
if kill_mode == 0:
|
|
additional_opts.update({
|
|
"kill_random_test": kill_random_test,
|
|
})
|
|
elif kill_mode == 1:
|
|
if cmd_params.get('disable_wal', 0) == 1:
|
|
my_kill_odd = kill_random_test // 50 + 1
|
|
else:
|
|
my_kill_odd = kill_random_test // 10 + 1
|
|
additional_opts.update({
|
|
"kill_random_test": my_kill_odd,
|
|
"kill_exclude_prefixes": "WritableFileWriter::Append,"
|
|
+ "WritableFileWriter::WriteBuffered",
|
|
})
|
|
elif kill_mode == 2:
|
|
# TODO: May need to adjust random odds if kill_random_test
|
|
# is too small.
|
|
additional_opts.update({
|
|
"kill_random_test": (kill_random_test // 5000 + 1),
|
|
"kill_exclude_prefixes": "WritableFileWriter::Append,"
|
|
"WritableFileWriter::WriteBuffered,"
|
|
"PosixMmapFile::Allocate,WritableFileWriter::Flush",
|
|
})
|
|
# Run kill mode 0, 1 and 2 by turn.
|
|
kill_mode = (kill_mode + 1) % 3
|
|
elif check_mode == 1:
|
|
# normal run with universal compaction mode
|
|
additional_opts = {
|
|
"kill_random_test": None,
|
|
"ops_per_thread": cmd_params['ops_per_thread'],
|
|
"compaction_style": 1,
|
|
}
|
|
# Single level universal has a lot of special logic. Ensure we cover
|
|
# it sometimes.
|
|
if random.randint(0, 1) == 1:
|
|
additional_opts.update({
|
|
"num_levels": 1,
|
|
})
|
|
elif check_mode == 2:
|
|
# normal run with FIFO compaction mode
|
|
# ops_per_thread is divided by 5 because FIFO compaction
|
|
# style is quite a bit slower on reads with lot of files
|
|
additional_opts = {
|
|
"kill_random_test": None,
|
|
"ops_per_thread": cmd_params['ops_per_thread'] // 5,
|
|
"compaction_style": 2,
|
|
}
|
|
else:
|
|
# normal run
|
|
additional_opts = {
|
|
"kill_random_test": None,
|
|
"ops_per_thread": cmd_params['ops_per_thread'],
|
|
}
|
|
|
|
cmd = gen_cmd(dict(list(cmd_params.items())
|
|
+ list(additional_opts.items())
|
|
+ list({'db': dbname}.items())), unknown_args)
|
|
|
|
print("Running:" + ' '.join(cmd) + "\n") # noqa: E999 T25377293 Grandfathered in
|
|
|
|
# If the running time is 15 minutes over the run time, explicit kill and
|
|
# exit even if white box kill didn't hit. This is to guarantee run time
|
|
# limit, as if it runs as a job, running too long will create problems
|
|
# for job scheduling or execution.
|
|
# TODO detect a hanging condition. The job might run too long as RocksDB
|
|
# hits a hanging bug.
|
|
hit_timeout, retncode, stdoutdata, stderrdata = execute_cmd(
|
|
cmd, exit_time - time.time() + 900)
|
|
msg = ("check_mode={0}, kill option={1}, exitcode={2}\n".format(
|
|
check_mode, additional_opts['kill_random_test'], retncode))
|
|
|
|
print(msg)
|
|
print(stdoutdata)
|
|
print(stderrdata)
|
|
|
|
if hit_timeout:
|
|
print("Killing the run for running too long")
|
|
break
|
|
|
|
expected = False
|
|
if additional_opts['kill_random_test'] is None and (retncode == 0):
|
|
# we expect zero retncode if no kill option
|
|
expected = True
|
|
elif additional_opts['kill_random_test'] is not None and retncode <= 0:
|
|
# When kill option is given, the test MIGHT kill itself.
|
|
# If it does, negative retncode is expected. Otherwise 0.
|
|
expected = True
|
|
|
|
if not expected:
|
|
print("TEST FAILED. See kill option and exit code above!!!\n")
|
|
sys.exit(1)
|
|
|
|
stderrdata = stderrdata.lower()
|
|
errorcount = (stderrdata.count('error') -
|
|
stderrdata.count('got errors 0 times'))
|
|
print("#times error occurred in output is " + str(errorcount) +
|
|
"\n")
|
|
|
|
if (errorcount > 0):
|
|
print("TEST FAILED. Output has 'error'!!!\n")
|
|
sys.exit(2)
|
|
if (stderrdata.find('fail') >= 0):
|
|
print("TEST FAILED. Output has 'fail'!!!\n")
|
|
sys.exit(2)
|
|
|
|
# First half of the duration, keep doing kill test. For the next half,
|
|
# try different modes.
|
|
if time.time() > half_time:
|
|
# we need to clean up after ourselves -- only do this on test
|
|
# success
|
|
shutil.rmtree(dbname, True)
|
|
os.mkdir(dbname)
|
|
cmd_params.pop('expected_values_dir', None)
|
|
check_mode = (check_mode + 1) % total_check_mode
|
|
|
|
time.sleep(1) # time to stabilize after a kill
|
|
|
|
|
|
def main():
|
|
global stress_cmd
|
|
|
|
parser = argparse.ArgumentParser(description="This script runs and kills \
|
|
db_stress multiple times")
|
|
parser.add_argument("test_type", choices=["blackbox", "whitebox"])
|
|
parser.add_argument("--simple", action="store_true")
|
|
parser.add_argument("--cf_consistency", action='store_true')
|
|
parser.add_argument("--txn", action='store_true')
|
|
parser.add_argument("--test_best_efforts_recovery", action='store_true')
|
|
parser.add_argument("--enable_ts", action='store_true')
|
|
parser.add_argument("--stress_cmd")
|
|
|
|
all_params = dict(list(default_params.items())
|
|
+ list(blackbox_default_params.items())
|
|
+ list(whitebox_default_params.items())
|
|
+ list(simple_default_params.items())
|
|
+ list(blackbox_simple_default_params.items())
|
|
+ list(whitebox_simple_default_params.items())
|
|
+ list(blob_params.items())
|
|
+ list(ts_params.items()))
|
|
|
|
for k, v in all_params.items():
|
|
parser.add_argument("--" + k, type=type(v() if callable(v) else v))
|
|
# unknown_args are passed directly to db_stress
|
|
args, unknown_args = parser.parse_known_args()
|
|
|
|
test_tmpdir = os.environ.get(_TEST_DIR_ENV_VAR)
|
|
if test_tmpdir is not None and not os.path.isdir(test_tmpdir):
|
|
print('%s env var is set to a non-existent directory: %s' %
|
|
(_TEST_DIR_ENV_VAR, test_tmpdir))
|
|
sys.exit(1)
|
|
|
|
if args.stress_cmd:
|
|
stress_cmd = args.stress_cmd
|
|
if args.test_type == 'blackbox':
|
|
blackbox_crash_main(args, unknown_args)
|
|
if args.test_type == 'whitebox':
|
|
whitebox_crash_main(args, unknown_args)
|
|
# Only delete the `expected_values_dir` if test passes
|
|
if expected_values_dir is not None:
|
|
shutil.rmtree(expected_values_dir)
|
|
|
|
|
|
if __name__ == '__main__':
|
|
main()
|