Update xorg.conf manpage for new RandR 1.2 monitor options.

This commit is contained in:
Eric Anholt 2007-03-26 12:44:58 -07:00
parent f7c5aa0dc0
commit 92ba435bd9

View File

@ -1004,12 +1004,22 @@ The
.B Identifier
entry specifies the unique name for this monitor. The
.B Monitor
section provides information about the specifications of the monitor,
monitor-specific
section may be used to provide information about the specifications of the
monitor, monitor-specific
.BR Options ,
and information about the video modes to use with the monitor. Specifying
video modes is optional because the server now has a built-in list of
VESA standard modes. When modes are specified explicitly in the
and information about the video modes to use with the monitor.
.PP
With RandR 1.2-enabled drivers, monitor sections are tied to specific outputs
of the video card. Each output has a name, and the server will look for a
Monitor named
.B \*qMonitor-outputname\*q
for configuration of that output (for example,
.B \*qMonitor-VGA\*q
for a VGA output)
.PP
Specifying video modes is optional because the server will use the DDC or other
information provided by the monitor to automatically configure the list of
modes available. When modes are specified explicitly in the
.B Monitor
section (with the
.BR Modes ,
@ -1017,7 +1027,8 @@ section (with the
or
.B UseModes
keywords), built-in modes with the same names are not included. Built-in
modes with different names are, however, still implicitly included.
modes with different names are, however, still implicitly included, when they
meet the requirements of the monitor.
.PP
The entries that may be used in
.B Monitor
@ -1214,6 +1225,62 @@ monitors do not require it. The default is off.
This optional entry specifies the vertical refresh rate that the server
should aim for when selecting video modes. Without this option, the
default is to prefer modes with higher refresh rates.
.TP 7
.BI "Option " "\*qPreferredMode\*q " \*qstring\*q
This optional entry specifies a mode to be marked as the preferred initial mode
of the monitor.
(RandR 1.2-supporting drivers only)
.TP 7
.BI "Option " "\*qPosition\*q " "\*qx y\*q"
This optional entry specifies the position of the monitor within the X
screen.
(RandR 1.2-supporting drivers only)
.TP 7
.BI "Option " "\*qLeftOf\*q " \*qmonitor\*q
This optional entry specifies that the monitor should be positioned to the
left of the monitor of the given name.
(RandR 1.2-supporting drivers only)
.TP 7
.BI "Option " "\*qRightOf\*q " \*qmonitor\*q
This optional entry specifies that the monitor should be positioned to the
right of the monitor of the given name.
(RandR 1.2-supporting drivers only)
.TP 7
.BI "Option " "\*qAbove\*q " \*qmonitor\*q
This optional entry specifies that the monitor should be positioned above the
monitor of the given name.
(RandR 1.2-supporting drivers only)
.TP 7
.BI "Option " "\*qBelow\*q " \*qmonitor\*q
This optional entry specifies that the monitor should be positioned below the
monitor of the given name.
(RandR 1.2-supporting drivers only)
.TP 7
.BI "Option " "\*qEnable\*q " \*qbool\*q
This optional entry specifies whether the monitor should be turned on
at startup. By default, the server will attempt to enable all connected
monitors.
(RandR 1.2-supporting drivers only)
.TP 7
.BI "Option " "\*qMinClock\*q " \*qfrequency\*q
This optional entry specifies the minimum dot clock, in kHz, that is supported
by the monitor.
.TP 7
.BI "Option " "\*qMaxClock\*q " \*qfrequency\*q
This optional entry specifies the maximum dot clock, in kHz, that is supported
by the monitor.
.TP 7
.BI "Option " "\*qIgnore\*q " \*qbool\*q
This optional entry specifies that the monitor should be ignored entirely,
and not reported through RandR. This is useful if the hardware reports the
presence of outputs that don't exist.
(RandR 1.2-supporting drivers only)
.TP 7
.BI "Option " "\*qRotate\*q " \*qrotation\*q
This optional entry specifies the initial rotation of the given monitor.
Valid values for rotation are \*qnormal\*q, \*qleft\*q, \*qright\*q, and
\*qinverted\*q.
(RandR 1.2-supporting drivers only)
.SH MODES SECTION
The config file may have multiple