diff --git a/hw/xfree86/exa/man/exa.man b/hw/xfree86/exa/man/exa.man index e43411ee7..42a8de31d 100644 --- a/hw/xfree86/exa/man/exa.man +++ b/hw/xfree86/exa/man/exa.man @@ -36,7 +36,7 @@ default is intended to be the best performing one for general use, though others may help with specific use cases. Available options include \*qalways\*q, \*qgreedy\*q, and \*qsmart\*q. Default: always. .SH "SEE ALSO" -.BR __xservername__ (__appmansuffix__), +.BR Xorg (__appmansuffix__), .BR xorg.conf(__filemansuffix__). .SH AUTHORS Authors include: Keith Packard, Eric Anholt, Zack Rusin, and Michel D\(:anzer diff --git a/hw/xfree86/fbdevhw/man/fbdevhw.man b/hw/xfree86/fbdevhw/man/fbdevhw.man index 2ca7bb50b..fa46df08f 100644 --- a/hw/xfree86/fbdevhw/man/fbdevhw.man +++ b/hw/xfree86/fbdevhw/man/fbdevhw.man @@ -14,7 +14,7 @@ fbdev(__drivermansuffix__) is a non-accelerated driver which runs on top of the fbdevhw module. fbdevhw can be used by other drivers too, this is usually activated with `Option "UseFBDev"' in the device section. .SH "SEE ALSO" -__xservername__(__appmansuffix__), xorg.conf(__filemansuffix__), +Xorg(__appmansuffix__), xorg.conf(__filemansuffix__), xorgconfig(__appmansuffix__), Xserver(__appmansuffix__), X(__miscmansuffix__), fbdev(__drivermansuffix__) .SH AUTHORS diff --git a/hw/xfree86/man/Xorg.man b/hw/xfree86/man/Xorg.man index 94156450b..0cd5a1068 100644 --- a/hw/xfree86/man/Xorg.man +++ b/hw/xfree86/man/Xorg.man @@ -1,16 +1,16 @@ .\" $XdotOrg: xserver/xorg/hw/xfree86/doc/man/Xorg.man.pre,v 1.3 2005/07/04 18:41:01 ajax Exp $ .\" shorthand for double quote that works everywhere. .ds q \N'34' -.TH __xservername__ __appmansuffix__ __vendorversion__ +.TH Xorg __appmansuffix__ __vendorversion__ .SH NAME -__xservername__ - X11R7 X server +Xorg - X11R7 X server .SH SYNOPSIS -.B __xservername__ +.B Xorg .RI [\fB:\fP display ] .RI [ option .IR ... ] .SH DESCRIPTION -.B __xservername__ +.B Xorg is a full featured X server that was originally designed for UNIX and UNIX-like operating systems running on Intel x86 hardware. It now runs on a wider range of hardware and OS platforms. @@ -24,7 +24,7 @@ by Thomas Roell which was contributed to X11R5 by Snitily Graphics Consulting Service. .SH PLATFORMS .PP -.B __xservername__ +.B Xorg operates under a wide range of operating systems and hardware platforms. The Intel x86 (IA32) architecture is the most widely supported hardware platform. Other hardware platforms include Compaq Alpha, Intel IA64, AMD64, @@ -37,7 +37,7 @@ Xquartz(__appmansuffix__) X server. Win32/Cygwin is supported with the XWin(__appmansuffix__) X server. .PP .SH "NETWORK CONNECTIONS" -.B __xservername__ +.B Xorg supports connections made using the following reliable byte-streams: .TP 4 @@ -47,7 +47,7 @@ On some System V platforms, the "local" connection types also include STREAMS pipes, named pipes, and some other mechanisms. .TP 4 .I TCP\/IP -.B __xservername__ +.B Xorg listens on port .RI 6000+ n , where @@ -108,7 +108,7 @@ file. If you use xdm(1), the definitions should be early on in the .I __projectroot__/lib/X11/xdm/Xsession script. .SH OPTIONS -.B __xservername__ +.B Xorg supports several mechanisms for supplying/obtaining configuration and run-time parameters: command line options, environment variables, the xorg.conf(__filemansuffix__) configuration files, auto-detection, and @@ -125,15 +125,15 @@ manual page. .PP In addition to the normal server options described in the Xserver(__appmansuffix__) manual page, -.B __xservername__ +.B Xorg accepts the following command line switches: .TP 8 .BI vt XX .I XX specifies the Virtual Terminal device number which -.B __xservername__ +.B Xorg will use. Without this option, -.B __xservername__ +.B Xorg will pick the first available Virtual Terminal that it can locate. This option applies only to platforms that have virtual terminal support, such as Linux, BSD, OpenSolaris, SVR3, and SVR4. @@ -187,7 +187,7 @@ config directory search path for all other users. .TP 8 .B \-configure When this option is specified, the -.B __xservername__ +.B Xorg server loads all video driver modules, probes for available hardware, and writes out an initial xorg.conf(__filemansuffix__) file based on what was detected. This option currently has some problems on some @@ -249,7 +249,7 @@ options. .TP 8 .B \-ignoreABI The -.B __xservername__ +.B Xorg server checks the ABI revision levels of each module that it loads. It will normally refuse to load modules with ABI revisions that are newer than the server's. This is because such modules might use interfaces @@ -300,20 +300,20 @@ section is used. Use the file called .I filename as the -.B __xservername__ +.B Xorg server log file. The default log file is -.BI __logdir__/__xservername__. n .log +.BI __logdir__/Xorg. n .log on most platforms, where .I n is the display number of the -.B __xservername__ +.B Xorg server. The default may be in a different directory on some platforms. This option is only available when the server is run as root (i.e, with real-uid 0). .TP 8 .BR \-logverbose " [\fIn\fP]" Sets the verbosity level for information printed to the -.B __xservername__ +.B Xorg server log file. If the .I n value isn't supplied, each occurrence of this option increments the log @@ -327,7 +327,7 @@ Set the module search path to .IR searchpath . .I searchpath is a comma separated list of directories to search for -.B __xservername__ +.B Xorg server modules. This option is only available when the server is run as root (i.e, with real-uid 0). .TP 8 @@ -434,7 +434,7 @@ support. .SH "KEYBOARD" .PP The -.B __xservername__ +.B Xorg server is normally configured to recognize various special combinations of key presses that instruct the server to perform some action, rather than just sending the key press event to a client application. These actions @@ -477,7 +477,7 @@ respectively. This can be disabled with the .B DontVTSwitch xorg.conf(__filemansuffix__) file option. .SH CONFIGURATION -.B __xservername__ +.B Xorg typically uses a configuration file called .B xorg.conf and configuration files with the suffix @@ -488,7 +488,7 @@ for its initial setup. Refer to the xorg.conf(__filemansuffix__) manual page for information about the format of this file. .PP -.B __xservername__ +.B Xorg has a mechanism for automatically generating a built-in configuration at run-time when no .B xorg.conf @@ -506,16 +506,16 @@ be generated at run-time. .PP The second is to have "safe" fallbacks for most configuration information. This maximises the likelihood that the -.B __xservername__ +.B Xorg server will start up in some usable configuration even when information about the specific hardware is not available. .PP -The automatic configuration support for __xservername__ is work in progress. +The automatic configuration support for Xorg is work in progress. It is currently aimed at the most popular hardware and software platforms -supported by __xservername__. Enhancements are planned for future releases. +supported by Xorg. Enhancements are planned for future releases. .SH FILES The -.B __xservername__ +.B Xorg server config files can be found in a range of locations. These are documented fully in the xorg.conf(__filemansuffix__) manual page. The most commonly used locations are shown here. @@ -550,7 +550,7 @@ Server configuration directory. .B __projectroot__/lib/X11/__xconfigdir__ Server configuration directory. .TP 30 -.BI __logdir__/__xservername__. n .log +.BI __logdir__/Xorg. n .log Server log file for display .IR n . .TP 30 @@ -623,15 +623,15 @@ Web site .IR . .SH AUTHORS -__xservername__ has many contributors world wide. The names of most of them +Xorg has many contributors world wide. The names of most of them can be found in the documentation, ChangeLog files in the source tree, and in the actual source code. .PP -__xservername__ was originally based on XFree86 4.4rc2. +Xorg was originally based on XFree86 4.4rc2. That was originally based on \fIX386 1.2\fP by Thomas Roell, which was contributed to the then X Consortium's X11R5 distribution by SGCS. .PP -__xservername__ is released by the X.Org Foundation. +Xorg is released by the X.Org Foundation. .PP The project that became XFree86 was originally founded in 1992 by David Dawes, Glenn Lai, Jim Tsillas and David Wexelblat. @@ -671,7 +671,7 @@ Orest Zborowski \fIorestz@eskimo.com\fP .fi .RE .PP -__xservername__ source is available from the FTP server +Xorg source is available from the FTP server \fI\fP, and from the X.Org server \fI\fP. Documentation and other information can be found from the X.Org web site @@ -679,10 +679,10 @@ information can be found from the X.Org web site .SH LEGAL .PP -.B __xservername__ +.B Xorg is copyright software, provided under licenses that permit modification and redistribution in source and binary form without fee. -.B __xservername__ is copyright by numerous authors and +.B Xorg is copyright by numerous authors and contributors from around the world. Licensing information can be found at .IR . diff --git a/hw/xfree86/man/xorg.conf.man b/hw/xfree86/man/xorg.conf.man index 7edf312ba..72e57136c 100644 --- a/hw/xfree86/man/xorg.conf.man +++ b/hw/xfree86/man/xorg.conf.man @@ -3,9 +3,9 @@ .TH xorg.conf __filemansuffix__ __vendorversion__ .SH NAME xorg.conf, __xconfigdir__ \- configuration files for -__xservername__ X server +Xorg X server .SH INTRODUCTION -.B __xservername__ +.B Xorg supports several mechanisms for supplying/obtaining configuration and run-time parameters: command line options, environment variables, the xorg.conf and __xconfigdir__ configuration files, auto-detection, @@ -15,12 +15,12 @@ mechanisms is ordered from highest precedence to lowest. Note that not all parameters can be supplied via all methods. The available command line options and environment variables (and some defaults) are described in the Xserver(__appmansuffix__) and -__xservername__(__appmansuffix__) manual pages. Most configuration file +Xorg(__appmansuffix__) manual pages. Most configuration file parameters, with their defaults, are described below. Driver and module specific configuration parameters are described in the relevant driver or module manual page. .SH DESCRIPTION -.B __xservername__ +.B Xorg uses a configuration file called .I xorg.conf and files ending in the suffix @@ -60,7 +60,7 @@ environment variable, and is the machine's hostname as reported by .BR gethostname (__libmansuffix__). .PP -When the __xservername__ server is started by the \(lqroot\(rq user, the config file +When the Xorg server is started by the \(lqroot\(rq user, the config file search locations are as follows: .PP .RS 4 @@ -113,7 +113,7 @@ is a relative path (with no \(lq..\(rq components) specified with the .B \-configdir command line option. .PP -When the __xservername__ server is started by the \(lqroot\(rq user, the +When the Xorg server is started by the \(lqroot\(rq user, the config directory search locations are as follows: .PP .RS 4 @@ -331,7 +331,7 @@ section is used to specify some path names required by the server. Some of these paths can also be set from the command line (see .BR Xserver (__appmansuffix__) and -.BR __xservername__ (__appmansuffix__)). +.BR Xorg (__appmansuffix__)). The command line settings override the values specified in the config file. The @@ -342,7 +342,7 @@ The entries that can appear in this section are: .TP 7 .BI "FontPath \*q" path \*q sets the search path for fonts. -This path is a comma separated list of font path elements which the __xservername__ +This path is a comma separated list of font path elements which the Xorg server searches for font databases. Multiple .B FontPath @@ -426,8 +426,8 @@ font path when the server starts up. .RE .TP 7 .BI "ModulePath \*q" path \*q -sets the search path for loadable __xservername__ server modules. -This path is a comma separated list of directories which the __xservername__ server +sets the search path for loadable Xorg server modules. +This path is a comma separated list of directories which the Xorg server searches for loadable modules loading in the order specified. Multiple .B ModulePath @@ -441,17 +441,17 @@ __modulepath__ .ig .TP 7 .BI "LogFile \*q" path \*q -sets the name of the __xservername__ server log file. +sets the name of the Xorg server log file. The default log file name is .PP .RS 11 -.RI __logdir__/__xservername__. .log +.RI __logdir__/Xorg. .log .RE .PP .RS 7 where .I -is the display number for the __xservername__ server. +is the display number for the Xorg server. .. .TP 7 .BI "XkbDir \*q" path \*q @@ -466,7 +466,7 @@ __xkbdir__ In addition to options specific to this section (described below), the .B ServerFlags section is used to specify some global -__xservername__ server options. +Xorg server options. All of the entries in this section are .BR Options , although for compatibility purposes some of the old style entries are @@ -498,20 +498,20 @@ section to use in the absence of the command line option. .TP 7 .BI "Option \*qNoTrapSignals\*q \*q" boolean \*q -This prevents the __xservername__ server from trapping a range of unexpected fatal +This prevents the Xorg server from trapping a range of unexpected fatal signals and exiting cleanly. -Instead, the __xservername__ server will die and drop core where the fault occurred. -The default behaviour is for the __xservername__ server to exit cleanly, but still drop a +Instead, the Xorg server will die and drop core where the fault occurred. +The default behaviour is for the Xorg server to exit cleanly, but still drop a core file. -In general you never want to use this option unless you are debugging an __xservername__ +In general you never want to use this option unless you are debugging an Xorg server problem and know how to deal with the consequences. .TP 7 .BI "Option \*qUseSIGIO\*q \*q" boolean \*q -This controls whether the __xservername__ server requests that events from +This controls whether the Xorg server requests that events from input devices be reported via a SIGIO signal handler (also known as SIGPOLL on some platforms), or only reported via the standard select(3) loop. The default behaviour is platform specific. In general you do not want to -use this option unless you are debugging the __xservername__ server, or +use this option unless you are debugging the Xorg server, or working around a specific bug until it is fixed, and understand the consequences. .TP 7 @@ -531,7 +531,7 @@ Default: off. This disallows the use of the .B Terminate_Server XKB action (usually on Ctrl+Alt+Backspace, depending on XKB options). -This action is normally used to terminate the __xservername__ server. +This action is normally used to terminate the Xorg server. When this option is enabled, the action has no effect. Default: off. .TP 7 @@ -568,7 +568,7 @@ sets the inactivity timeout for the phase of the screensaver. .I time is in minutes. -This is equivalent to the __xservername__ server's +This is equivalent to the Xorg server's .B \-s flag, and the value can be changed at run\-time with .BR xset(__appmansuffix__). @@ -679,9 +679,9 @@ Unset by default. .SH "MODULE SECTION" The .B Module -section is used to specify which __xservername__ server modules should be loaded. -This section is ignored when the __xservername__ server is built in static form. -The type of modules normally loaded in this section are __xservername__ server +section is used to specify which Xorg server modules should be loaded. +This section is ignored when the Xorg server is built in static form. +The type of modules normally loaded in this section are Xorg server extension modules. Most other module types are loaded automatically when they are needed via other mechanisms. @@ -1324,14 +1324,14 @@ recommends that you do. .BI "ClockChip \*q" clockchip\-type \*q This optional entry is used to specify the clock chip type on graphics boards which have a programmable clock generator. -Only a few __xservername__ drivers support programmable clock chips. +Only a few Xorg drivers support programmable clock chips. For details, see the appropriate driver manual page. .TP 7 .BI "VideoRam " "mem" This optional entry specifies the amount of video ram that is installed on the graphics board. This is measured in kBytes. -In most cases this is not required because the __xservername__ server probes +In most cases this is not required because the Xorg server probes the graphics board to determine this quantity. The driver-specific documentation should indicate when it might be needed. .TP 7 @@ -1481,7 +1481,7 @@ if or .B Hz is added to the end of the line. -The data given here is used by the __xservername__ server to determine if video +The data given here is used by the Xorg server to determine if video modes are within the specifications of the monitor. This information should be available in the monitor's handbook. If this entry is omitted, a default range of 28\-33kHz is used. @@ -1500,7 +1500,7 @@ if or .B kHz is added to the end of the line. -The data given here is used by the __xservername__ server to determine if video +The data given here is used by the Xorg server to determine if video modes are within the specifications of the monitor. This information should be available in the monitor's handbook. If this entry is omitted, a default range of 43\-72Hz is used. @@ -1895,7 +1895,7 @@ Others are driver\-independent, and will eventually be described here. .TP 7 .BI "Option \*qAccel\*q" Enables XAA (X Acceleration Architecture), a mechanism that makes video cards' -2D hardware acceleration available to the __xservername__ server. +2D hardware acceleration available to the Xorg server. This option is on by default, but it may be necessary to turn it off if there are bugs in the driver. There are many options to disable specific accelerated operations, listed @@ -2070,7 +2070,7 @@ formats. This may also be specified from the command line with the .B \-weight option (see -.BR __xservername__(__appmansuffix__)). +.BR Xorg(__appmansuffix__)). .TP 7 .BI "Virtual " "xdim ydim" This optional entry specifies the virtual screen resolution to be used. @@ -2414,7 +2414,7 @@ The data therein is not used in this release. General: .BR X (__miscmansuffix__), .BR Xserver (__appmansuffix__), -.BR __xservername__ (__appmansuffix__), +.BR Xorg (__appmansuffix__), .BR cvt (__appmansuffix__), .BR gtf (__appmansuffix__). .PP diff --git a/hw/xfree86/utils/man/cvt.man b/hw/xfree86/utils/man/cvt.man index 22bae3a60..310e46405 100644 --- a/hw/xfree86/utils/man/cvt.man +++ b/hw/xfree86/utils/man/cvt.man @@ -12,7 +12,7 @@ cvt - calculate VESA CVT mode lines .I Cvt is a utility for calculating VESA Coordinated Video Timing modes. Given the desired horizontal and vertical resolutions, a modeline adhering to the CVT -standard is printed. This modeline can be included in __xservername__ +standard is printed. This modeline can be included in Xorg .B xorg.conf(__filemansuffix__) . diff --git a/hw/xfree86/utils/man/gtf.man b/hw/xfree86/utils/man/gtf.man index dfd6b5533..004d2f059 100644 --- a/hw/xfree86/utils/man/gtf.man +++ b/hw/xfree86/utils/man/gtf.man @@ -14,7 +14,7 @@ gtf - calculate VESA GTF mode lines is a utility for calculating VESA GTF modes. Given the desired horizontal and vertical resolutions and refresh rate (in Hz), the parameters for a matching VESA GTF mode are printed out. Two output formats are -supported: mode lines suitable for the __xservername__ +supported: mode lines suitable for the Xorg .B xorg.conf(__filemansuffix__) file, and mode parameters suitable for the Linux .B fbset(8) @@ -27,7 +27,7 @@ Enable verbose printouts This shows a trace for each step of the computation. .TP 8 .BR \-x | \-\-xorgmode -Print the mode parameters as __xservername__-style mode lines. This is the +Print the mode parameters as Xorg-style mode lines. This is the default format. .TP 8 .BR \-f | \-\-fbset