libxcb 14.1 and older are not forwards-compatible with new device
classes as it does not properly ignore unknown device classes. Since
breaking libxcb would break quite a lot of applications, we instead
report Gesture device class only if the client advertised support for XI
2.4.
Clients may still not work in cases when a client advertises XI 2.4
support and then a completely separate module within the client uses
broken libxcb to call XIQueryDevice.
Signed-off-by: Povilas Kanapickas <povilas@radix.lt>
This has caused nonsensical values in xinput output.
Signed-off-by: Roman Kapl <code@rkapl.cz>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
The byte-swapping code forgot that the xXIButtonInfo is followed by a
button mask, not directly by the button labels. This resulted in client
crashes in cross-endian setups, for example in `xinput list --long`,
since the client got an invalid atom.
A new function was introduced to get the right positions for the label
and mask data.
Signed-off-by: Roman Kapl <code@rkapl.cz>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
This touches everything that ends up in the Xorg binary; the big missing
part is GLX since that's all generated code. Cuts about 14k from the
binary on amd64.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Multiple functions in the Xinput extension handling of requests from
clients failed to check that the length of the request sent by the
client was large enough to perform all the required operations and
thus could read or write to memory outside the bounds of the request
buffer.
This commit includes the creation of a new REQUEST_AT_LEAST_EXTRA_SIZE
macro in include/dix.h for the common case of needing to ensure a
request is large enough to include both the request itself and a
minimum amount of extra data following the request header.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
The formatter confused address operators preceded by casts with
bitwise-and expressions, placing spaces on either side of both.
That syntax isn't used by ordinary address operators, however,
so fix them for consistency.
Signed-off-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Casting return to (void) was used to tell lint that you intended
to ignore the return value, so it didn't warn you about it.
Casting the third argument to (char *) was used as the most generic
pointer type in the days before compilers supported C89 (void *)
(except for a couple places it's used for byte-sized pointer math).
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
This is strictly the application of the script 'x-indent-all.sh'
from util/modular. Compared to the patch that Daniel posted in
January, I've added a few indent flags:
-bap
-psl
-T PrivatePtr
-T pmWait
-T _XFUNCPROTOBEGIN
-T _XFUNCPROTOEND
-T _X_EXPORT
The typedefs were needed to make the output of sdksyms.sh match the
previous output, otherwise, the code is formatted badly enough that
sdksyms.sh generates incorrect output.
The generated code was compared with the previous version and found to
be essentially identical -- "assert" line numbers and BUILD_TIME were
the only differences found.
The comparison was done with this script:
dir1=$1
dir2=$2
for dir in $dir1 $dir2; do
(cd $dir && find . -name '*.o' | while read file; do
dir=`dirname $file`
base=`basename $file .o`
dump=$dir/$base.dump
objdump -d $file > $dump
done)
done
find $dir1 -name '*.dump' | while read dump; do
otherdump=`echo $dump | sed "s;$dir1;$dir2;"`
diff -u $dump $otherdump
done
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
These structs will be used to store touch-related data, events and
information.
Drivers must call InitTouchClassDeviceStruct to set up a multi-touch capable
device.
Touchpoints for the DDX and the DIX are handled separately - touchpoints
submitted by the driver/DDX will be stored in the DDXTouchPointInfoRec. Once
the touchpoints are processed by the DIX, new TouchPointInfoRecs are created
and stored. This process is already used for pointer events with the
last.valuators field.
Note that this patch does not actually add the generation of touch events,
only the required structs.
TouchListeners are (future) recipients of touch or emulated pointer events.
Each listener is in a state, depending which event they have already
received. The type of listener defines how the listener got to be one.
Co-authored-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
For scroll wheel support, we used to send buttons 4/5 and 6/7 for
horizontal/vertical positive/negative scroll events. For touchpads, we
really want more fine-grained scroll values. GetPointerEvents now
accepts both old-school scroll button presses, and new-style scroll axis
events, while emitting both types of events to support both old and new
clients.
This works with the new XIScrollClass to mark axes as scrolling axes.
Drivers mark any valuators that send scroll events with SetScrollValuator.
(Currently missing: the XIDeviceChangeEvent being sent when a driver changes
a scroll axis at run-time. This can be added later.)
Note: the SCROLL_TYPE enums are intentionally different values to the XI2
proto values to avoid copy/overlapping range bugs.
Co-authored-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Swapping the wrong size was never caught because swap{l,s} are macros.
It's clear in the case of Xext/xres.c, that the author believed
client_major/minor to be CARD16 from looking at the code in the first
hunk.
v2: dmx.c fixes from Keith.
Reviewed-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Also, fix whitespace, mainly around
swaps(&rep.sequenceNumber)
Reviewed-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
WriteReplyToClient() swaps rep.length, so it can't be used
on return of WriteReplyToClient(). So save it's value for later
use.
Signed-off-by: Matthieu Herrb <matthieu.herrb@laas.fr>
Reviewed-by: Julien Cristau <jcristau@debian.org>
This is not a straightforward search/replacement due to a long-standing
issue.
dev->u.master is the same field as dev->u.lastSlave. Thus, if dev is a master
device, a check for dev->u.master may give us false positives and false
negatives.
The switch to IsFloating() spells out these cases and modifies the
conditions accordingly to cover both cases.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Benjamin Tissoires <tissoire@cena.fr>
The XI2 protocol supports per-axis modes, but the server so far does
not. This change adds support in the server.
A complication is the fact that XI1 does not support per-axis modes.
The solution provided here is to set a per-device mode that defines the
mode of at least the first two valuators (X and Y). Note that initializing
the first two axes to a different mode than the device mode will fail.
For XI1 events, any axes following the first two that have the same mode
will be sent to clients, up to the first axis that has a different mode.
Thus, if a device has relative, then absolute, then relative mode axes,
only the first block of relative axes will be sent over XI1.
Since the XI2 protocol supports per-axis modes, all axes are sent to the
client.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
The only remaining X-functions used in server are XNF*, the rest is converted to
plain alloc/calloc/realloc/free/strdup.
X* functions are still exported from server and x* macros are still defined in
header file, so both ABI and API are not affected by this change.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Both dev and dev->button are already used before their checking were being
performed. So check on the beginning.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Instead of returning BadAccess when "read" permission is denied
on a device, falsify the device state (buttons down, keys pressed).
This is nicer to applications, but may still have undesired side
effects. The long-term solution is not to use these requests in
event-driven code!
Requests affected: QueryPointer, QueryKeymap, XiQueryDevice.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
If the check fails, leave the device off the returned list of info
structures. Under XI2, this may cause inconsistent views of the device
topology after a change (for example, devices disappearing from view,
or showing as attached to a master that cannot be seen). More work is
needed to deal with topology changes and device relabeling.
Signed-off-by: Eamon Walsh <ewalsh@tycho.nsa.gov>
Note: ABI break, but ABI_XINPUT_VERSION has NOT been bumped. Recompile input
drivers.
Revert "Xi: return BadImplementation for deviceids 256 and above"
This reverts commit 2b459f44f3.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Some files (notably those merged with MPX before XI2 came along) didn't use
a 'xi' prefix. This patch changes all of them to meaningful names.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Povilas Kanapickas
Roman Kapl
Adam Jackson
Alan Coopersmith
Yaakov Selkowitz
Peter Hutterer
Keith Packard
Daniel Stone
Matt Turner
Tiago Vignatti
Matthieu Herrb
Chase Douglas
Mikhail Gusarov
Eamon Walsh