Support the new DRI2 2.2 protocol requests: DRI2SwapBuffers, DRI2GetMSC,
DRI2WaitMSC, DRI2WaitSBC and DRI2SwapInterval.
These requests allow the server to support the SGI_video_sync,
SGI_swap_interval, and OML_sync_control GLX extensions if DDX support is
present. The new DDX APIs are documented in dri2.h.
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Adam Jackson <ajax@nwnk.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
xfree itself checks for NULL, and even this is not necessary
as passing NULL to free(3) is safe.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Add a backend using libudev for input hotplug, and disable the hal and
dbus backends if this one is enabled.
XKB configuration happens using xkb{rules,model,layout,variant,options}
properties (case-insensitive) on the device. We fill in InputAttributes
to allow configuration through InputClass in Xorg.
Requires udev 148 for the input_id helper and ID_INPUT* properties.
Signed-off-by: Julien Cristau <jcristau@debian.org>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
While the identifier is likely set before the input classes are merged, the
driver may not be. Hence don't check for a driver before we've completed
configuration for this device.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Julien Cristau <jcristau@debian.org>
This was always the intention, I only recently realized it wasn't the case
yet...
Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Acked-by: Maarten Maathuis <madman2003@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Currently Xorg uses hal's fdi files to decide what configuration options
are applied to automatically added input devices. This is sub-optimal
since it requires users to use a new and different configuration store
than xorg.conf.
The InputClass section attempts to provide a system similar to hal where
configuration can be applied to all devices with certain attributes. For
now, devices can be matched to:
* A substring of the product name via a MatchProduct entry
* A substring of the vendir name via a MatchVendor entry
* A pathname pattern of the device file via a MatchDevicePath entry
* A device type via boolean entries for MatchIsKeyboard, MatchIsPointer,
MatchIsJoystick, MatchIsTablet, MatchIsTouchpad and MatchIsTouchscreen
See the INPUTCLASS section in xorg.conf(5) for more details.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
In order to give NewInputDeviceRequest more information, a new
InputAttributes type is introduced. Currently, this collects the product
and vendor name, device path, and sets booleans for attributes such as
having keys and/or a pointer. Only the HAL backend fills in the
attributes, though.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Refactored code into the parser to allow the freeform boolean types used
in Option entries to be used in other configuration entries. This isn't
as powerful as allowing "No" to precede the option names, but it atleast
gives a common handling of "yes", "no", etc.
A type xf86TriState has been added to support an optional boolean. This
allows the boolean sense of the value to be kept while providing a means
to signal that it is unset.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Any input device with this option will be automatically added to whichever
server layout is selected at startup. This removes the need to reference a
device from the ServerLayout section. The two following configuration are
identical:
CONFIG 1:
Section "ServerLayout"
InputDevice "foo"
EndSection
Section "InputDevice"
Identifier "foo"
...
EndSection
CONFIG 2:
Section "InputDevice"
Identifier "foo"
Option "AutoServerLayout" "on"
...
EndSection
The selection of the server layout affects both explicitly specified
layouts and the implicit layout.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp at keithp.com>
Add a new command line parameter, -configdir, to specify the config
directory to be used. Rules are the same as -config for root vs. user
privileges.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
Currently there is a single file, xorg.conf, for configuring the server.
This works fine most of the time, but it becomes a problem when packages
or system services need to adjust the configuration. Instead, allow
multiple configuration files to live in a directory. Typically this will
be /etc/X11/xorg.conf.d.
Files with a suffix of .conf will be read and added to the server
configuration after xorg.conf. The server won't fall back to using the
auto configuration unless there is no config file and there are no files
in the config directory.
Right now this uses a simpler search template than the config file
search path by not using the command line or environment variable
parameters. The matching code was refactored a bit to make this more
coherent. Any DDX wanting to read the config files will need to call
xf86initConfigFiles before opening/reading them. This is to allow
xf86openConfigFile without xf86openConfigDirFiles and vice-versa.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
These functions should not be used outside of DDXs, so no need to put
them in the ABI.
Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer at who-t.net>
I don't think this one has been in use since 2003.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
2003 called, they want their ifdefs back.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reshuffle and reword - InputDevice sections are only necessary if
hotplugging is disabled. Put more emphasis on hotplugging and less on HAL
since we'll switch backends eventually.
CorePointer, CoreKeyboard, and AlwaysCore should be listed as deprecated
since they don't do what they used to since 1.4. These days, only
SendCoreEvents matters and it's enabled for any driver calling
xf86ProcessCommonOptions (== every driver).
It only controls the startup behavior too, so document this.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@sun.com>
Convert all calls of CreateNewResourceType to pass name argument
Breaks DIX ABI.
ABI versions bumped:
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Calls RegisterResourceName to record the type name for
use by X-Resource, XACE/SELinux/XTsol, and DTrace.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Make sure to check return value before setting bitmask flags.
For most calls, just fails to init the extension. Since Xinput
already calls FatalError() on initialization failure, so does
failure to allocate Xinput's resource type.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Default remains the same - on for most OS'es on i386 (except Solaris),
off for everyone else. Can be manually toggled via --enable-pc98 or
--disable-pc98.
Signed-off-by: Alan Coopersmith <alan.coopersmith@sun.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
SpecialKeyHandling was removed from the kbd driver with version 1.4.0. Since
this is the only version that will build against server 1.7+ it's not
reasonable to mention it in the man page. Reword, point to XKB instead and
make clear that some key combinations _may_ not be available in any given
config.
Reported-by: Derek Fawcus
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@sun.com>
1.7 always shipped with DontZap disabled, it's just the default keymaps that
may not include the symbol to trigger it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@sun.com>
Most of the Xv Put/Get operations have an off by one error in the
viewport clipping.
Apparently PutImage was fixed at some point but the same code was
already copy-pasted all over the place, and so the other operations
still suffer from the bug.
Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com>
Reviewed-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
On Fri, Dec 11, 2009 at 10:19:01AM -0800, Keith Packard wrote:
> On Wed, 9 Dec 2009 11:55:14 +1000, Peter Hutterer <peter.hutterer@who-t.net> wrote:
> > On Tue, Dec 08, 2009 at 05:24:06PM -0800, Aaron Plattner wrote:
> > > On Tue, Dec 08, 2009 at 03:52:27PM -0800, Peter Hutterer wrote:
> > > > Xorg +xinerama crashes immediately due to whacky dependency between Xinerama
> > > > and RandR12. The latter doesn't initialize if Xinerama is enabled, but if
> > > > only one screen is found, Xinerama is disabled again and RandR12 tries to
> > > > access data it never initialized.
>
> I'd sure like to have RandR get enabled when xinerama doesn't; is there
> an easy way of making that happen here? Perhaps having the RandR12 code
> disable Xinerama when only one screen is found? Or some other kludge?
you know the dependency better than I do so any hints are apreciated.
afaict, the screenInfo.numScreens (the check used by Xinerama) isn't
necessarily initialized at this point so we can't use the same check.
The following seems to work though:
From 670b3ebdb7312a6433a8f093d0820785db2aea20 Mon Sep 17 00:00:00 2001
From: Peter Hutterer <peter.hutterer@who-t.net>
Date: Mon, 14 Dec 2009 11:00:58 +1000
Subject: [PATCH] xfree86: if only one screen was found, disable Xinerama (#24627)
Xorg +xinerama crashes immediately due to whacky dependency between Xinerama
and RandR12. The latter doesn't initialize if Xinerama is enabled, but if
only one screen is found, Xinerama is disabled again and RandR12 tries to
access data it never initialized.
Dependency chain is:
- ProcessCommandLine sets noPanoramiXExtension to FALSE
- xf86RandR12Init() is a noop
- PanoramiXExtensionInit sets noPanoramiXExtension to TRUE
- xf86RandR12CreateScreenResources tries to use the devPrivates key it never
initialized.
This hack checks if there's only one screen at the time RandR12 is
initialized. If so, we expect Xinerama to fail anyhow so we disable it
ourselves and proceed as planned.
X.Org Bug 24627 <http://bugs.freedesktop.org/show_bug.cgi?id=24627>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Previously it was trying to set the same value as the default one. Sigh.
Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com>
Acked-by: Rami Ylimaki <ext-rami.ylimaki@nokia.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
main.c:134: warning: no previous prototype for 'dix_main'
rootlessScreen.c: In function 'RootlessMarkOverlappedWindows':
rootlessScreen.c:434: warning: function declaration isn't a prototype
backtrace.c:51: warning: format '%lx' expects type 'long unsigned int', but argument 5 has type 'int'
backtrace.c:54: warning: format '%lx' expects type 'long unsigned int', but argument 5 has type 'int'
set.c: In function 'RecordSetMemoryRequirements':
set.c:413: warning: old-style function definition
set.c: In function 'RecordCreateSet':
set.c:425: warning: old-style function definition
stub.c: In function ‘main’:
stub.c:236: warning: ISO C90 forbids mixed declarations and code
Signed-off-by: Jeremy Huddleston <jeremyhu@freedesktop.org>
Technically, disabling AEI is the right suggestion. AEI off forces the
server to init the built-in defaults for input devices (or pick the first
one from the config file). At the same time, hotplugging is still available
with AEI off.
Unfortunatly, in the vast majority of cases users want to simply disable
hotplugging or have a working server while the local HAL configuration is
broken or missing. Disabling AEI will lead to duplicate events, triple
keystrokes, etc. once the configuration works again.
It's not actually required to remove AEI once hotplugging works again,
though it will in many cases lead to a setup that appears broken.
Asking users to disable AutoAddDevices instead means those users disable
hotplugging, can then fix the HAL setup and they _must_ remove the config
line again to test if hotplugging works again. Which doesn't leave them with
a broken config once everything is working nice and dandy. Less bugreports,
everybody wins.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Dan Nicholson <dbn.lists@gmail.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Rémi Cardona <remi@gentoo.org>
Acked-by: James Cloos <cloos@jhcloos.com>
Should probably also be applied to stabler xserver branches too.
Luc Verhaegen.
From a22bc20721bad506d8fa9772b1258568cbffe7d2 Mon Sep 17 00:00:00 2001
From: Luc Verhaegen <libv@skynet.be>
Date: Wed, 11 Nov 2009 15:52:39 +0100
Subject: [PATCH] Xv: Fix AdjustFrame when driver implements ReputImage.
Finally fixes fd.o #4653, filed more than 4 years ago.
Patch can be happily applied to all modular Xorg versions.
Signed-off-by: Luc Verhaegen <libv@skynet.be>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This makes us more consistent with the rest of the codebase, using xalloc/xfree
Signed-off-by: Jeremy Huddleston <jeremyhu@freedesktop.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
If we are id="org.x" and the launchd socket is ":0", we will claim
the socket to match the old behavior before we prefixed the
socket name with our id.
Signed-off-by: Jeremy Huddleston <jeremyhu@freedesktop.org>
v1->v2: Make one condition case for one quirk instead of merging them
together. This is based on the Keithp's suggestion.
Move the EDID quirk for Philips LCD LP154W01 as the panel reports the vertical
size in cm.
https://bugs.freedesktop.org/show_bug.cgi?id=24482
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>