Most (but not all) of these were found by using
codespell --builtin clear,rare,usage,informal,code,names
but not everything reported by that was fixed.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
You might as well, it's harmless. Better, some cleanup code (like DRI2
swap wait) needs to run both normally and at client exit, so it
simplifies the callers to not need to check first. See 4308f5d3 for a
similar example.
Props: @ajax (Adam Jackson)
Fixes: xorg/xserver#211
Signed-off-by: Daniel Llewellyn <diddledan@ubuntu.com>
Otherwise this is broken on cygwin:
rrlease.c: In function ‘ProcRRCreateLease’:
rrlease.c:305:9: error: implicit declaration of function ‘WriteFdToClient’ [-Werror=implicit-function-declaration]
if (WriteFdToClient(client, fd, TRUE) < 0) {
Signed-off-by: Adam Jackson <ajax@redhat.com>
A client can send a big request where the 32B "length" field has value
0. When the big request header is removed and the length corrected,
the value will underflow to 0xFFFFFFFF. Functions processing the
request later will think that the client sent much more data and may
touch memory beyond the receive buffer.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
oc->trans_conn is set to NULL when the connection is closed. At this
point, oc->fd is no longer valid and shouldn't be used. Move
dereference of oc->fd up into YieldControlNoInput where the state of
oc->trans_conn can be checked in a single place.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
AbortClient performs most of the same operations as
CloseDownFileDescriptor except that it doesn't call ospoll_remove,
leaving that unaware that the file descriptor has been closed.
If the file descriptor is re-used before the server comes back around
to clean up, and that new file descriptor is passed to SetNotifyFd,
then that function will mistakenly re-interpret the stale ClientPtr
returned by ospoll_data as a struct notify * instead and mangle data
badly.
To fix this, the patch does:
1) Change CloseDownFileDescriptor so that it can be called multiple
times on the same OsCommPtr. The calls related to the file
descriptor are moved inside the check for trans_conn and
oc->trans_conn is set to NULL after cleaning up.
2) Move the XdmcpCloseDisplay call into CloseDownFileDescriptor. I
don't think the actually matters as we just need to know at some
point that the session client has exited. Moving it avoids the
possibility of having this accidentally trigger from another client
with the same fd which closes down at around the same time.
3) Change AbortClient to call CloseDownFileDescriptor. This makes sure
that all of the fd-related clean up happens in the same way
everywhere, in particular ensures that ospoll is notified about the
closed file descriptor at the time it is closed and not some time later.
Debian-bug: https://bugs.debian.org/862824
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This makes sure the server will go look at the client again, notice
that the FD is no longer valid and close the client down.
Bugzilla: https://bugs.freedesktop.org/100863
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
There are three copies of the same short sequence of operations to
close down a client when a write error occurs. Create a new function,
AbortClient, which performs these operations and then call it from the
three places.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-and-Tested-by: Michel Dänzer <michel.daenzer@amd.com>
The clever pointer tricks were actually not working, and we were doing
the byte-by-byte moves in general. By just doing the memcpy and
obvious byte swap code, we end up generating actual byte swap
instructions, thanks to optimizing compilers.
text data bss dec hex filename
before: 2240807 51552 132016 2424375 24fe37 hw/xfree86/Xorg
after: 2215167 51552 132016 2398735 249a0f hw/xfree86/Xorg
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
The input thread should generate events, not send them. Make it easier to
find the instances where it's doing so.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Olivier Fourdan <ofourdan@redhat.com>
Remove leftover from commit e10ba9e, MAX_TIMES_PER is not used anymore.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
When a client with pending output is ready (has request data pending),
FlushAllOutput will skip it to get all of the requests processed
before sending any queued output. That means FlushAllOutput is going
to return with some output pending to a client which isn't known to be
write blocked. And that means NewOutputPending needs to be set so that
FlushAllOutput will get called again to actually go flush this client.
It might be interesting to try just flushing the client to send any
queued data along the way. This patch just restores the server
behavior to what it was before the ospoll changes.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Tested-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Tested-by: Matthieu Herrb <matthieu@herrb.eu>
This change has two effects:
1. Only calls FlushCallbacks when we're actually flushing data to a
client. The unnecessary FlushCallback calls could cause significant
performance degradation with compositing, which is significantly
reduced even without any driver changes.
2. By passing the ClientPtr to FlushCallbacks, drivers can completely
eliminate unnecessary flushing of GPU commands by keeping track of
whether we're flushing any XDamageNotify events to the client for
which the corresponding rendering commands haven't been flushed to
the GPU yet.
Reviewed-by: Adam Jackson <ajax@redha.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Eliminates all of the fd_set mangling in the server main thread
v2: Listen for POLLOUT while writes are blocked.
v3: Only mark client not ready on EAGAIN return from read
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This converts the dispatch loop into using a list of ready clients
instead of an array. This changes the WaitForSomething API so that it
notifies DIX when a client becomes ready to read, instead of returning
the set of ready clients.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This matches a change made in xcb and improves performance for a small
increase in memory usage.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
This adds the ability to be notified when a file descriptor is
available for writing.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This allows the server to call GetTimeInMillis() after each request is
processed to avoid needing setitimer. -dumbSched now turns off the
setitimer.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Globally replace #ifdef and #if defined usage of 'sun' with '__sun'
such that strict ISO compiler modes such as -ansi or -std=c99 can be used.
Signed-off-by: Richard PALO <richard@NetBSD.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
When (long) is larger than (int), and when realloc succeeds with sizes
larger than INT_MAX, ConnectionOutput->size and ConnectionOutput->count
overflow and become negative.
When ConnectionOutput->count is negative, InsertIOV does not actually
insert an IOV, and FlushClient goes into an infinite loop of writev(fd,
iov, 0) [an empty list].
Avoid this situation by killing the client when it has more than INT_MAX
unread bytes of data.
Signed-off-by: Peter Harris <pharris@opentext.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Solaris <sys/errno.h> has:
#define EWOULDBLOCK EAGAIN
so checking (errno == EAGAIN || errno == EWOULDBLOCK) is overkill.
This leads cppcheck 1.62 to complain:
[xserver/os/io.c:365] -> [xserver/os/io.c:365]: (style) Same expression on both sides of '||'.
[xserver/os/io.c:941] -> [xserver/os/io.c:941]: (style) Same expression on both sides of '||'.
This quiets it, and reduces the number of calls Solaris Studio cc
generates to the __errno() function to get the thread-specific errno value.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
This lets us stop using the 'pointer' typedef in Xdefs.h as 'pointer'
is used throughout the X server for other things, and having duplicate
names generates compiler warnings.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
req_fds and SetReqFds in include/dixstruct.h
ReadFdFromClient, WriteFdToClient and the FD flushing in os/io.c
Signed-off-by: Keith Packard <keithp@keithp.com>
This passes a file descriptor from the client to the server, which is
then mmap'd
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This adds two interfaces:
void SetReqFds(ClientPtr client, int req_fds)
Marks the number of file descriptors expected for this
request. Call this before any request processing so that
any un-retrieved file descriptors will be closed
automatically.
int ReadFdFromClient(ClientPtr client)
Reads the next queued file descriptor from the connection. If
this request is not expecting any more file descriptors, or
if there are no more file descriptors available from the
connection, then this will return -1.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
If we immediately put the WriteToClient() buffer into the socket's write
queue, not only do we benefit from sending the response back to client
earlier, but we also avoid the overhead of copying the data into our own
staging buffer and causing extra work in the next select(). The write is
effectively free as typically we may only send one reply per client per
select() call, so the cost of the FlushClient() is the same.
shmget10: 26400 -> 110000
getimage10: 25000 -> 108000
shmget500: 3160 -> 13500
getimage500: 1000 -> 1010
The knock-on effect is that on a mostly idle composited desktop, the CPU
overhead is dominated by the memmove in WriteToClient, which is in turn
eliminated by this patch.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
If a client sends a request larger than maxBigRequestSize, the server is
supposed to ignore it.
Before commit cf88363d, the server would simply disconnect the client. After
that commit, it attempts to gracefully ignore the request by remembering how
long the client specified the request to be, and ignoring that many bytes.
However, if a client sends a BigReq header with a large size and disconnects
before actually sending the rest of the specified request, the server will
reuse the ConnectionInput buffer without resetting the ignoreBytes field. This
makes the server ignore new X clients' requests.
This fixes that behavior by resetting the ignoreBytes field when putting the
ConnectionInput buffer back on the FreeInputs list.
Signed-off-by: Robert Morell <rmorell@nvidia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
They're declared in osdep.h, so don't redeclare them in io.c as
well. Keeps the compiler happier.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
In commit:
commit 092c57ab17
Author: Adam Jackson <ajax@redhat.com>
Date: Fri Jun 17 14:03:01 2011 -0400
os: Hide the Connection{In,Out}put implementation details
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
the check for an empty output buffer was moved from one calling
location into the FlushClient implementation itself. However, this
neglected the possibility that additional data, in the form of
'extraBuf' would be passed to FlushClient from other code paths. If the
output buffer happened to be empty at that time, the extra data would
never be written to the client.
This is fixed by checking the total data to be written, which includes
both pending and extra data, instead of just the pending data.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Adds new function padding_for_int32() and uses existing pad_to_int32()
depending on required results.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Daniel Stone <daniel@fooishbar.org>
Clear them out when needed instead of leaving whatever values were
present in previously sent messages.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Tested-by: Daniel Stone <daniel@fooishbar.org>
This is strictly the application of the script 'x-indent-all.sh'
from util/modular. Compared to the patch that Daniel posted in
January, I've added a few indent flags:
-bap
-psl
-T PrivatePtr
-T pmWait
-T _XFUNCPROTOBEGIN
-T _XFUNCPROTOEND
-T _X_EXPORT
The typedefs were needed to make the output of sdksyms.sh match the
previous output, otherwise, the code is formatted badly enough that
sdksyms.sh generates incorrect output.
The generated code was compared with the previous version and found to
be essentially identical -- "assert" line numbers and BUILD_TIME were
the only differences found.
The comparison was done with this script:
dir1=$1
dir2=$2
for dir in $dir1 $dir2; do
(cd $dir && find . -name '*.o' | while read file; do
dir=`dirname $file`
base=`basename $file .o`
dump=$dir/$base.dump
objdump -d $file > $dump
done)
done
find $dir1 -name '*.dump' | while read dump; do
otherdump=`echo $dump | sed "s;$dir1;$dir2;"`
diff -u $dump $otherdump
done
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Acked-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Move some constants near their only users, and remove some
getdtablesize() logic that's second-guessing configure.
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Fixes gcc warning:
io.c: In function 'WriteToClient':
io.c:826:6: warning: cast discards qualifiers from pointer target type
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Any pad bytes in replies are written to the client from a zeroed
array. However, record extension tries to incorrectly access the pad
bytes from the end of reply data.
Signed-off-by: Rami Ylimäki <rami.ylimaki@vincit.fi>
Reviewed-by: Erkki Seppälä <erkki.seppala@vincit.fi>
Also, fix whitespace, mainly around
swaps(&rep.sequenceNumber)
Reviewed-by: Peter Harris <pharris@opentext.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Commit cf88363db0 fixed the handling of
BigReq requests that are way too large and handles the case where the
read() syscall returns a short read. However, it neglected to handle
the case where it returns a long read, which happens when the client
has another request in the queue after the bogus large one.
Handle the long read case by subtracting the smaller of 'needed' and
'gotnow' from oci->ignoreBytes. If needed < gotnow, simply subtract
the two, leaving gotnow equal to the number of extra bytes read.
Since the code immediately following the (oci->ignoreBytes > 0) block
tries to handle the next request, advance oci->bufptr immediately
instead of setting oci->lenLastReq and letting the next call to
ReadRequestFromClient do it.
Fixes the XTS pChangeKeyboardMapping-3 test.
CASES TESTS PASS UNSUP UNTST NOTIU WARN FIP FAIL UNRES UNIN ABORT
-Xproto 122 389 367 2 19 0 0 0 1 0 0 0
+Xproto 122 389 368 2 19 0 0 0 0 0 0 0
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If a client sends a big request that's too big (i.e. bigger than
maxBigRequestSize << 2 bytes), the server just disconnects it. This makes the
client receive SIGPIPE the next time it tries to send something.
The X Test Suite sends requests that are too big when the test specifies the
TOO_LONG test type. When the client receives SIGPIPE, XTS marks it as
UNRESOLVED, which counts as a failure.
Instead, remember how long the request is supposed to be and then return that
size. Dispatch() checks the length and sends BadLength to the client. Then,
whenever oci->ignoreBytes is nonzero, ignore the data read instead of trying to
process it as a request.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
We were missing the callback in a couple of places. Drivers may use
the flush callback to submit batched up rendering before events (for
example, damage events) are sent out, to ensure that the rendering
has been queued when the client receives the event.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This patch was generated by the following Perl code:
perl -i -pe 's/([^_])return\s*\(\s*([^(]+?)\s*\)s*;(\s+(\n))?/$1return $2;$4/g;'
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
This matches the test in TryClientEvents, and is a superset of tests
done by the callers of these functions. The consequence of forgetting
these tests is a server crash, so they're always desirable. In my
opinion, it's better to not require the callers to remember to do these
checks.
For callers that don't do very much work before calling WriteToClient or
WriteEventsToClient, I've removed the redundant checks.
hw/xquartz/xpr/appledri.c has an interesting case: While its check for
"client == NULL" appears redundant with the test in WriteEventsToClient,
it dereferences client to get the sequence number.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=27497
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Adam Jackson <ajax@redhat.com>
The only remaining X-functions used in server are XNF*, the rest is converted to
plain alloc/calloc/realloc/free/strdup.
X* functions are still exported from server and x* macros are still defined in
header file, so both ABI and API are not affected by this change.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
