Otherwise, displays driven by GPU screens remain on all the time.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
dtime to the previous event is 0 on the first BarrierHit event.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Use bytes_per_line and bits_per_pixel from the created XImage to fix
https://bugzilla.redhat.com/show_bug.cgi?id=518960
Signed-off-by: Daniel Martin <consume.noise@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
So in the cold plug server shutdown case, we reap the resources
before we call CloseScreen handlers, so the config->randr_provider
is a dangling pointer when the xf86CrtcCloseScreen handler is called,
however in the hot screen unplug case, we can't rely on automatically
reaped resources, so we need to clean up the provider in the xf86CrtcCloseScreen
case.
This patch provides a cleanup callback from the randr provider removal
into the DDX so it can cleanup properly, this then gets called by the automatic
code for cold plug, or if hot unplug it gets called explicitly.
Fixes a number of random server crashes on shutdown
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=58174
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=891140
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The previous fix for the previous fix, didn't fully work,
If we don't set compat_output we end up doing derferences
of arrays with -1, leading to valgrind warnings.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Due to another bug, the modesetting/udl driver would fail to init properly
on hotplug, when it did the code didn't clean up properly, and on removing
the device the server could crash.
Found in F18 testing.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
Xlib doesn't use this value (it computes it from the reply length
instead) which is why nobody has noticed yet. But the spec
http://www.x.org/releases/X11R7.7/doc/kbproto/xkbproto.html
says that it should be set.
Signed-off-by: Peter Harris <pharris@opentext.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
With this option passed, ephyr windows can be resized like normal
windows on the fly, without the need of an explicit parent window.
Signed-off-by: Daniel Martin <daniel.martin@secunet.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
==5712== 6 bytes in 1 blocks are still reachable in loss record 17 of 585
==5712== at 0x4A074CD: malloc (vg_replace_malloc.c:236)
==5712== by 0x3D1DE885B1: strndup (strndup.c:46)
==5712== by 0x41CB71: MakeAtom (atom.c:121)
==5712== by 0x55AE3E: XIGetKnownProperty (xiproperty.c:401)
==5712== by 0x4251C9: AddInputDevice (devices.c:312)
==5712== by 0x42AC0C: AllocDevicePair (devices.c:2657)
==5712== by 0x425E6E: InitCoreDevices (devices.c:677)
==5712== by 0x5ACA05: main (main.c:257)
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
xf86Cursor.c:19:18: warning: redundant redeclaration of 'inputInfo'
[-Wredundant-decls]
In file included from xf86Cursor.c:18:0:
../../../include/inputstr.h:614:57: note: previous declaration of
'inputInfo' was here
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
xkb.c: In function '_XkbSetNamesCheck':
xkb.c:3987:18: warning: variable 'names' set but not used
[-Wunused-but-set-variable]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
panoramiX.c: In function 'PanoramiXCreateConnectionBlock':
panoramiX.c:599:10: warning: declaration of 'disableBackingStore' shadows a
global declaration [-Wshadow]
In file included from ../include/windowstr.h:60:0,
from panoramiX.c:47:
../include/opaque.h:56:52: warning: shadowed declaration is here [-Wshadow]
panoramiX.c: In function 'PanoramiXConsolidate':
panoramiX.c:834:19: warning: declaration of 'pScreen' shadows a previous
local [-Wshadow]
panoramiX.c:813:15: warning: shadowed declaration is here [-Wshadow]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
xvdisp.c: In function 'ProcXvStopVideo':
xvdisp.c:712:11: warning: declaration of 'rc' shadows a previous local
[-Wshadow]
xvdisp.c:705:17: warning: shadowed declaration is here [-Wshadow]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
fbpict.c: In function 'fbGlyphs':
fbpict.c:188:6: warning: declaration of 'x' shadows a previous local
[-Wshadow]
fbpict.c:111:9: warning: shadowed declaration is here [-Wshadow]
fbpict.c:188:9: warning: declaration of 'y' shadows a previous local
[-Wshadow]
fbpict.c:111:12: warning: shadowed declaration is here [-Wshadow]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Soren Sandmann <ssp@redhat.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Unused as of 5d309af2ed
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
rrcrtc.c: In function 'RRCrtcDetachScanoutPixmap':
rrcrtc.c:366:9: warning: variable 'ret' set but not used
[-Wunused-but-set-variable]
rrcrtc.c: In function 'rrCheckPixmapBounding':
rrcrtc.c:505:13: warning: variable 'ret' set but not used
[-Wunused-but-set-variable]
rrcrtc.c:445:9: warning: unused variable 'i' [-Wunused-variable]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Format strings with length modifiers but missing format specifier like "%0"
will read one byte past the array size.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
When an RandR shared pixmap is created in rrCreateSharedPixmap, it has a refcnt
of 1. Then, PixmapShareToSlave bumps the refcnt to 2. However, there's no
corresponding PixmapUnshareFromSlave where the refcnt can be decreased again,
and there's no convenient common place where the refcnt can be decremented when
the slave pixmap is destroyed.
Fix this by just unreffing the pixmap twice in RRCrtcDetachScanoutPixmap.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
This is necessary when the input handler deletes itself from the
list. Bug found by Maarten Lankhorst, this patch uses the list macros
instead of open-coding the fix.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
man xorg.conf states that the 'Device' identifier is required in the
'Screen' section, yet current xserver defaults properly and boots up
fine without it.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=20742
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Instead of defaulting to -intel for Oaktrail, Medfield, and CDV chips,
default to -fbdev. For Poulsbo (only), attempt to use -psb if it's
installed, and fallback to fbdev otherwise. All other Intel chips
should use -intel.
This fixed an issue where -intel would load on these chips and cause a
boot failure. Newer -intel drivers avoid the boot hang, but it's still
the wrong driver to load, so why take chances.
The patch was originally created by Stefan Dirsch for OpenSUSE. We have
included it in our stable release (Ubuntu "quantal" 12.10) since
December.
ref: https://bugzilla.novell.com/show_bug.cgi?id=772279
ref: https://bugs.launchpad.net/ubuntu/+bug/1069031
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=60514
Signed-off-by: Bryce Harrington <bryce@canonical.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
If we're about to abort, we're already in the signal handler and cannot call
down to the default device cleanup routines (which reset, free, alloc, and
do a bunch of other things).
Add a new DEVICE_ABORT mode to signal a driver's DeviceProc that it must
reset the hardware if needed but do nothing else. An actual HW reset is only
required for some drivers dealing with the HW directly.
This is largely backwards-compatible, hence the input ABI minor bump only.
Drivers we care about either return BadValue on a mode that's not
DEVICE_{INIT|ON|OFF|CLOSE} or print an error and return BadValue. Exception
here is vmmouse, which currently ignores it and would not reset anything.
This should be fixed if the reset is required.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
The transformation matrix we previously stored was a scaled matrix based on
the axis ranges of the device. For relative movements, the scaling is not
required (or desired).
Store two separate matrices, one as requested by the client, one as the
product of [scale . matrix . inv_scale]. Depending on the type of movement,
apply the respective matrix.
For relative movements, also drop the translation component since it doesn't
really make sense to use that bit.
Input ABI 19
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Truncating the fraction part leads to a test failure where -1203.30 is
printed as -1203.29. Round this to the nearest value instead by adding
0.5 before converting to an integer
Signed-off-by: Keith Packard <keithp@keithp.com>
Set on DeviceEnterLeaveEvent() the xXIEnterEvent->focus field
similarly to how the CoreEnterLeaveEvent() function above does
for core events.
This fixes bug https://bugzilla.gnome.org/show_bug.cgi?id=677329
reported to GTK+, where focus handling on window managers with
sloppy focus or no window manager present was broken due to this
field being always set to FALSE.
Signed-off-by: Carlos Garnacho <carlosg@gnome.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
XTest devices are the first ones in the list, being initialised together
with the master devices. If we disable the devices in-order and a device has
a button down when being disabled, the XTest device is checked for a
required button release (xkbAccessX.c's ProcessPointerEvent). This fails if
the device is already NULL.
Instead of putting the check there, disable the devices in the reverse order
they are initialised. Disable physical slaves first, then xtest devices,
then the master devices.
Testcase: shut down server with a button still held down on a physical
device
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Absolute devices may send relative events depending on the mode (synaptics
by default, wacom per option). The relative events are added to the previous
position, converted into device coordinates and then scaled into desktop
coordinates for pointer movement.
Because the device range must be mapped into the desktop coordinate range,
this results in uneven scaling depending dimensions, e.g. on a setup with
width == 2 * height, a relative movement of 10/10 in device coordinates
results in a cursor movement of 20/10 (+ acceleration)
Other commonly user-visible results:
* the touchpad changing acceleration once an external monitor as added.
* drawing a circle on a wacom tablet in relative mode gives an ellipsis in
the same ratio as the desktop dimensions.
Solution: pre-scale the incoming relative x/y coordinates by width/height
ratio of the total desktop size. Then add them to the previous
coordinates and scale back with the previous mapping, which will undo the
pre-scaling and give us the right movement.
X.Org Bug 31636 <http://bugs.freedesktop.org/show_bug.cgi?id=31636>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
If we're already using our own custom macro, might as well use it properly.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
This is mostly sigsafe code, so use sigsave printf. And update some fields
to double that used to be int.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
The redirect and the message action filter functions implicitly assumed that
when they receive an event for the same keycode they were activated for, that
this is the a release of the key that activated the filter. This is not true
if the key autorepeats. Due to the incorrect assumption, the effective key
repeat rate was effectively halved.
Signed-off-by: Andreas Wettstein <wettstein509@solnet.ch>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
For absolute events, if the client specifies a screen number offset the
coordinates by that. And add a new flag so we know when _not_ to add the
screen offset in GPE.
Without this offset and the flag, GPE would simply add the offset of the
current screen if POINTER_SCREEN is set.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Not passing in a screen means we skip the screen crossing updates, so a
xtest event that changes between ScreenRecs won't do so until the next
physical event comes in or never, whichever comes earlier.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Scaled is already in desktop coordinates, take the total width into account,
not just the current screen's width.
Fixes Xdmx pointer position calculation.
X.Org Bug 51904 <http://bugs.freedesktop.org/show_bug.cgi?id=51904>
Signed-off-by: Sybren van Elderen <sowmestno@msn.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
If acpid sends a string in a format that we can't parse, bail out instead of
potentially dereferencing a NULL-pointer.
X.Org Bug 73227 <http://bugs.freedesktop.org/show_bug.cgi?id=73227>
Signed-off-by: Ted Felix <ted@tedfelix.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
mask[(MAX_VALUATORS + 7)/8] is larger than data[MAX_VALUATORS], so static
code checkers think we may be running OOB on the data array. Mask is
initialized to 0, so this should not happen, but change it anyway to shut up
code analyzer noise.
X.Org Bug 59939 <http://bugs.freedesktop.org/show_bug.cgi?id=59939>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
dv is still NULL at this point, so return firstValuator instead (which is
the same value dv->firstValuator would be once initialized)
X.Org Bug 59937 <http://bugs.freedesktop.org/show_bug.cgi?id=59937>
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
