Most (but not all) of these were found by using
codespell --builtin clear,rare,usage,informal,code,names
but not everything reported by that was fixed.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
This option was implemented before the drivers were split in ≈2006,
and e.g. XWin still supports it.
With this commit, Xorg regains support, so that the following configuration can
be used to set the repeat rate for all keyboard devices without having to modify
Xorg command-line flags or having to automate xset(1):
Section "InputClass"
Identifier "system-keyboard"
MatchIsKeyboard "on"
Option "XkbLayout" "de"
Option "XkbVariant" "neo"
Option "AutoRepeat" "250 30"
EndSection
Signed-off-by: Michael Stapelberg <stapelberg@google.com>
xf86platformProbeDev didn't check the device path, fix it.
This is a problem when trying to set up a non-PCI device via
explicit xorg.conf.d configuration.
An USB DisplayLink device, being non-PCI was always set up
as a GPU device assigned to screen 0 instead of a regular
framebuffer, potentially having its own dedicated screen,
despite such configuration as below. Only the relevant parts
of the configuration are quoted, it's part of a larger context
with an Intel chip that has 3 outputs:
* DP1 connected to an LCD panel,
* VGA1 connected to an external monitor,
* HDMI1 unconnected and having no user visible connector
Section "ServerFlags"
Option "AutoBindGPU" "false"
EndSection
...
Section "Device"
Identifier "Intel2"
Driver "intel"
BusID "PCI:0:2:0"
Screen 2
Option "Monitor-HDMI1" "HDMI1"
Option "ZaphodHeads" "HDMI1"
EndSection
Section "Device"
Identifier "UDL"
Driver "modesetting"
Option "kmsdev" "/dev/dri/card0"
#BusID "usb:0:1.2:1.0"
Option "Monitor-DVI-I-1" "DVI-I-1"
Option "ShadowFB" "on"
Option "DoubleShadow" "on"
EndSection
...
Section "Screen"
Identifier "SCREEN2"
Option "AutoServerLayout" "on"
Device "UDL"
GPUDevice "Intel2"
Monitor "Monitor-DVI-I-1"
SubSection "Display"
Modes "1024x768"
Depth 24
EndSubSection
EndSection
Section "ServerLayout"
Identifier "LAYOUT"
Option "AutoServerLayout" "on"
Screen 0 "SCREEN"
Screen 1 "SCREEN1" RightOf "SCREEN"
Screen 2 "SCREEN2" RightOf "SCREEN1"
EndSection
On the particular machine I was trying to set up an UDL device,
I found the following structure was being used to match
the device to a platform device while I was debugging the issue:
xf86_platform_devices[0] == Intel, /dev/dri/card1, primary platform device
xf86_platform_devices[1] == UDL, /dev/dri/card0
devList[0] == "Intel0", ZaphodHeads: DP1
devList[1] == "Intel1", ZaphodHeads: VGA1
devList[2] == "UDL"
devList[3] == "Intel2", ZaphodHeads: HDMI1 (intended GPU device to UDL)
When xf86platformProbeDev() matched the UDL device, the BusID
check failed in both cases of:
* BusID "usb:0:1.2:1.0" was specified
* Option "kmsdev" "/dev/dri/card0" was specified
As a result, xf86platformProbeDev() went on to call probeSingleDevice()
with xf86_platform_devices[0] and devList[2], resulting in the
UDL device being set up as a GPU device assigned to the first screen
instead of as a framebuffer on the third screen as the configuration
specified.
Checking Option "kmsdev" in code code may be a layering violation.
But the modesetting driver is actually part of the Xorg sources
instead of being an external driver, so he "kmsdev" path knowledge
may be used here.
Signed-off-by: Böszörményi Zoltán <zboszor@pr.hu>
Since commit d8ec33fe05, an include on
glxvndabi.h has been added to hw/xfree86/common/xf86Init.c
However, if glx is disabled through --disable-glx and GLX headers are
not installed in the build's environment, build fails on:
In file included from xf86Init.c:81:
../../../include/glxvndabi.h:64:10: fatal error: GL/glxproto.h: No such file or directory
64 | #include <GL/glxproto.h>
| ^~~~~~~~~~~~~~~
Fix this failure by removing this include which does not seem to be
needed (an other option would have been to keep it under an ifdef GLXEXT
block)
Fixes:
- http://autobuild.buildroot.org/results/de838a843f97673d1381a55fd4e9b07164693913
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
New now ask Glamor to use EGL_MESA_query_driver to obtain the DRI driver
name; if successful, we use that as the DRI driver name. Following the
existing dri2.c logic, we also use the same name for the VDPAU driver,
except for i965 (and now iris), where we switch to the "va_gl" fallback.
This allows us to bypass the PCI ID lists in xserver and centralize the
driver selection mechanism inside Mesa. The hope is that we no longer
have to update these lists for any future hardware.
During startup, the xfree86 DDX's InitOutput() calls PreInit for
protocol screens first, and then GPU screens. On teardown, dix_main()
calls CloseScreen in the reverse order: GPU screens first starting with
the last one and then working backwards, and then protocol screens also
in reverse order.
InitOutput() calls ScreenInit in the wrong order: for GPU screens first and then
for protocol screens. This causes a problem for drivers that have global state
that is tied to the first screen that calls ScreenInit.
Fix this by simply re-ordering the for loops to call PreInit for
protocol screens first and then for GPU screens second.
Slightly simplifies the callers since they don't need to check for
non-NULL anymore.
I do extremely hate the workarounds here to suppress misprite taking the
cursor down though. Surely there's a better way.
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
This is a modified version of a patch we've been carry-ing in Fedora and
RHEL for years now. This patch automatically adds secondary GPUs to the
master as output sink / offload source making e.g. the use of
slave-outputs just work, with requiring the user to manually run
"xrandr --setprovideroutputsource" before he can hookup an external
monitor to his hybrid graphics laptop.
There is one problem with this patch, which is why it was not upstreamed
before. What to do when a secondary GPU gets detected really is a policy
decission (e.g. one may want to autobind PCI GPUs but not USB ones) and
as such should be under control of the Desktop Environment.
Unconditionally adding autobinding support to the xserver will result
in races between the DE dealing with the hotplug of a secondary GPU
and the server itself dealing with it.
However we've waited for years for any Desktop Environments to actually
start doing some sort of autoconfiguration of secondary GPUs and there
is still not a single DE dealing with this, so I believe that it is
time to upstream this now.
To avoid potential future problems if any DEs get support for doing
secondary GPU configuration themselves, the new autobind functionality
is made optional. Since no DEs currently support doing this themselves it
is enabled by default. When DEs grow support for doing this themselves
they can disable the servers autobinding through the servers cmdline or a
xorg.conf snippet.
Signed-off-by: Dave Airlie <airlied@gmail.com>
[hdegoede@redhat.com: Make configurable, fix with nvidia, submit upstream]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
---
Changes in v2:
-Make the default enabled instead of installing a xorg.conf
snippet which enables it unconditionally
Changes in v3:
-Handle GPUScreen autoconfig in randr/rrprovider.c, looking at
rrScrPriv->provider, rather then in hw/xfree86/modes/xf86Crtc.c
looking at xf86CrtcConfig->provider. This fixes the autoconfig not
working with the nvidia binary driver
"bool" conflicts with C++ (meh) and stdbool.h (ngh alright fine). This
is a driver-visible change and will likely break the build for mach64,
but it can be fixed by simply using xf86ReturnOptValBool like every
other driver.
Signed-off-by: Adam Jackson <ajax@redhat.com>
<sys/io.h> on ARM hasn't worked for a long, long time, so it was removed
it from glibc upstream.
Remove the include to avoid a compilation failure on ARM with glibc.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Closes: https://gitlab.freedesktop.org/xorg/xserver/issues/840
Promote the generated file containing the date & time build was
configured to top-level.
Rename it from xf86Build.h to buildDateTIme.h.
Use it as well in XQuartz, stringize BUILD_DATE when needed.
If SYSTEMD_LOGIND is not defined, systemd_logind_take_fd is defined as a
macro evaluating to -1 by systemd-logind.h, leaving paused
uninitialized.
../hw/xfree86/common/xf86Xinput.c: In function ‘xf86NewInputDevice’:
../hw/xfree86/common/xf86Xinput.c:919:16: warning: ‘paused’ may be used uninitialized in this function [-Wmaybe-uninitialized]
../hw/xfree86/common/xf86Xinput.c:877:10: note: ‘paused’ was declared here
Drivers may need to loop over the allocated screens during PreInit, for example
to consolidate xorg.conf options that apply to a GPU device as a whole.
Currently, this works for protocol screens becuase x86Screens is exported, but
does not work for GPU screens.
Export xf86GPUScreens and xf86NumGPUScreens for consistency with xf86Screens and
xf86NumScreens.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Some Broadcom set-top-box boards have PCI busses, but the GPU is still
probed through DT. We would dereference a null busid here in that
case.
Signed-off-by: Eric Anholt <eric@anholt.net>
Lifted from vfb. xfree86 had almost the same thing but unparameterized,
port it to the vfb style.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Could cause privilege elevation and/or arbitrary files overwrite, when
the X server is running with elevated privileges (ie when Xorg is
installed with the setuid bit set and started by a non-root user).
CVE-2018-14665
Issue reported by Narendra Shinde and Red Hat.
Signed-off-by: Matthieu Herrb <matthieu@herrb.eu>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This hasn't done anything besides return TRUE in a long long time.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
These are so close to identical that most DDXes implement one in terms
of the other. All the relevant cases can be distinguished by the error
code, so merge the functions together to make things simpler.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Adam Jackson <ajax@redhat.com>
No supported driver supports 1bpp anymore, nor has in a very long time.
This option only worked with vgahw anyway.
Signed-off-by: Adam Jackson <ajax@redhat.com>
I don't think this is useful information to have in the log, and it's
a bunch of autotools and meson logic to produce it.
Signed-off-by: Eric Anholt <eric@anholt.net>
60ec8ead broke the autotools build:
sdksyms.o:(.data+0x58): undefined reference to `InitConnectionLimits'
sdksyms.o:(.data+0x2ec8): undefined reference to `xf86ServerName'
collect2: error: ld returned 1 exit status
Makefile:811: recipe for target 'Xorg' failed
Likewise 3a4d7c79 for InitConnectionLimits.
Signed-off-by: Adam Jackson <ajax@redhat.com>
If it's really this important we should just do it and not complain. We
never do it so it must not matter.
Signed-off-by: Adam Jackson <ajax@redhat.com>
I'm sure printing the address of function pointers in modules you'd
loaded might have made sense back when we rolled our own dlopen, but we
got better.
Signed-off-by: Adam Jackson <ajax@redhat.com>
The old code would not in fact validate the option value, though it
might complain about it in the log. It also didn't let you set some
legal values that the -maxclients command line option would.
Signed-off-by: Adam Jackson <ajax@redhat.com>
DGAShutdown() walks every screen and attempts to reset the mode. That's
maybe a reasonable thing to do, although the explicit loop is certainly
a bad smell.
In ddxGiveUp it's called after we've torn down the vga arbiter - and in
fact most of the rest of screen state - which is... very very bad. The
other place it's called is from the Control-Alt-BackSpace handler, where
we don't even attempt to do vga arb setup, and where in any case we're
going to escape the main loop eventually anyway.
Move all that cleanup work inside DGACloseScreen. This means it happens
earlier in server teardown than previously, but not in a way you're ever
going to be upset about.
Signed-off-by: Adam Jackson <ajax@redhat.com>
This makes us match the featureset of autotools, and also fixes the
non-Linux default value to match.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
We already have pm_noop.c being built most of the time for the
no-OS-PM case, so just switch to always using it.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
This lets an application open a suitable DRM device and pass the file
descriptor to the mode setting driver through an X server command line
option, '-masterfd'.
There's a companion application, xlease, which creates a DRM master by
leasing an output from another X server. That is available at
git clone git://people.freedesktop.org/~keithp/xlease
v2:
Always print usage, but note that it can't be used if
setuid/gid
Suggested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
In commit 9db2af6f75 (xfree86: Remove xf86{Map,Unmap}VidMem) we
somehow stopped exporting xf86{Read,Write}Mmio{8,16,32}. Since the
function pointer indirection was intended to support dense vs sparse and
sparse support is now gone, we can just make the functions static inline
in compiler.h and avoid all of this.
Bugzilla: https://bugs.gentoo.org/548906
Tested-by: Christopher May-Townsend <chris@maytownsend.co.uk>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
The newline before the protocl version got lost in commit
6cbefc3e0a. Prior to that commit, the
release date printed a newline at the end:
X.Org X Server 1.19.6
Release Date: 2017-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.14.12-1-ARCH x86_64
Now, that string gets run together with the version:
X.Org X Server 1.19.99.903 (1.20.0 RC 3)X Protocol Version 11, Revision 0
Build Operating System: Linux
Since the version string printing has a variety of #ifdefs in it, just
add the newline to the begining of the protocol version string.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
[... but leave it defined and exported, since we're ABI-frozen - ajax]
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Ben Crocker <bcrocker@redhat.com>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk>
Tested-by: Ben Crocker <bcrocker@redhat.com>
restore abi
Having different types of code all trying to check for elevated privileges
is a bad idea. This implementation is the most thorough one.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Ben Crocker <bcrocker@redhat.com>
Reviewed-by: Antoine Martin <antoine@nagafix.co.uk>
Tested-by: Ben Crocker <bcrocker@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Implement function added in DRI3 v1.1.
A newest version of libepoxy (>= 1.4.4) is required as earlier
versions use a problematic version of Khronos
EXT_image_dma_buf_import_modifiers spec.
v4: Only send scanout-supported modifiers if flipping is possible
v5: Fix memory corruption in XWayland (uninitialized pointer)
Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Acked-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>